* [PATCH v3 00/30] testing/next (gitlab, vm, docker)
@ 2020-06-26 18:13 Alex Bennée
2020-06-26 18:13 ` [PATCH v3 01/30] iotests: Fix 051 output after qdev_init_nofail() removal Alex Bennée
` (30 more replies)
0 siblings, 31 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, berrange, Alex Bennée, richard.henderson, f4bug, cota,
aurelien
Hi,
This is the next iteration of my testing/next queue. The main changes
from the last post:
https://patchew.org/QEMU/20200624140446.15380-1-alex.bennee@linaro.org/
The GitLab docker patches are almost ready although there are a couple
of problems running on GitLab's infrastructure which need to be ironed
out. I finally got the caching working so a local build is seeded from
the REGISTRY.
There is also a minor fix to optparse/argparse change for tests/vm.
There are two build fixes that I thought were going in via other trees
but I'll include them in the PR I plan to cut on Tuesday if their
respective sources haven't been merged by then.
The following need review:
- containers.yml: build with docker.py tooling
- gitlab: limit re-builds of the containers
- gitlab: split build-disabled into two phases
- gitlab: enable check-tcg for linux-user tests
- tests/docker: add a linux-user testing focused image
- gitlab: add acceptance testing to system builds
- tests/docker: add packages needed for check-acceptance
- tests/docker: add --registry support to tooling
- gitlab: build containers with buildkit and metadata
- .gitignore: un-ignore .gitlab-ci.d
- tests/docker: change tag naming scheme of our images
Alex Bennée (15):
tests/vm: switch from optsparse to argparse
tests/vm: allow us to take advantage of MTTCG
tests/docker: check for an parameters not empty string
tests/docker: change tag naming scheme of our images
.gitignore: un-ignore .gitlab-ci.d
gitlab: build containers with buildkit and metadata
tests/docker: add --registry support to tooling
tests/docker: add packages needed for check-acceptance
gitlab: add acceptance testing to system builds
tests/docker: add a linux-user testing focused image
gitlab: enable check-tcg for linux-user tests
gitlab: add avocado asset caching
gitlab: split build-disabled into two phases
gitlab: limit re-builds of the containers
containers.yml: build with docker.py tooling
Daniel P. Berrangé (3):
gitlab: introduce explicit "container" and "build" stages
gitlab: build all container images during CI
gitlab: convert jobs to use custom built containers
David Edmondson (1):
crypto/linux_keyring: fix 'secret_keyring' configure test
Philippe Mathieu-Daudé (1):
iotests: Fix 051 output after qdev_init_nofail() removal
Robert Foley (9):
tests/vm: pass args through to BaseVM's __init__
tests/vm: Add configuration to basevm.py
tests/vm: Added configuration file support
tests/vm: Add common Ubuntu python module
tests/vm: Added a new script for ubuntu.aarch64.
tests/vm: Added a new script for centos.aarch64.
tests/vm: change scripts to use self._config
python/qemu: Add ConsoleSocket for optional use in QEMUMachine
tests/vm: Add workaround to consume console
Thomas Huth (1):
gitlab-ci: Fix the change rules after moving the YML files
configure | 31 +-
.gitignore | 1 +
.gitlab-ci.d/containers.yml | 264 ++++++++++++++
.gitlab-ci.d/edk2.yml | 5 +-
.gitlab-ci.d/opensbi.yml | 5 +-
.gitlab-ci.yml | 275 ++++++++------
.travis.yml | 23 --
python/qemu/console_socket.py | 110 ++++++
python/qemu/machine.py | 23 +-
tests/docker/Makefile.include | 8 +-
tests/docker/common.rc | 2 +-
tests/docker/docker.py | 39 +-
.../dockerfiles/debian-all-test-cross.docker | 53 +++
.../dockerfiles/debian-alpha-cross.docker | 2 +-
.../dockerfiles/debian-amd64-cross.docker | 2 +-
tests/docker/dockerfiles/debian-amd64.docker | 2 +-
.../dockerfiles/debian-arm64-cross.docker | 2 +-
.../debian-arm64-test-cross.docker | 2 +-
.../dockerfiles/debian-armel-cross.docker | 2 +-
.../dockerfiles/debian-armhf-cross.docker | 2 +-
.../dockerfiles/debian-hppa-cross.docker | 2 +-
.../dockerfiles/debian-m68k-cross.docker | 2 +-
.../dockerfiles/debian-mips-cross.docker | 2 +-
.../dockerfiles/debian-mips64-cross.docker | 2 +-
.../dockerfiles/debian-mips64el-cross.docker | 2 +-
.../dockerfiles/debian-mipsel-cross.docker | 2 +-
.../dockerfiles/debian-powerpc-cross.docker | 2 +-
.../dockerfiles/debian-ppc64-cross.docker | 2 +-
.../dockerfiles/debian-ppc64el-cross.docker | 2 +-
.../dockerfiles/debian-riscv64-cross.docker | 2 +-
.../dockerfiles/debian-s390x-cross.docker | 2 +-
.../dockerfiles/debian-sh4-cross.docker | 2 +-
.../dockerfiles/debian-sparc64-cross.docker | 2 +-
.../dockerfiles/debian-tricore-cross.docker | 2 +-
.../dockerfiles/debian-win32-cross.docker | 2 +-
.../dockerfiles/debian-win64-cross.docker | 2 +-
tests/docker/dockerfiles/debian9-mxe.docker | 2 +-
tests/docker/dockerfiles/fedora.docker | 7 +
tests/docker/dockerfiles/ubuntu2004.docker | 10 +-
tests/qemu-iotests/051.pc.out | 4 +-
tests/vm/Makefile.include | 22 ++
tests/vm/aarch64vm.py | 106 ++++++
tests/vm/basevm.py | 339 +++++++++++++-----
tests/vm/centos-8-aarch64.ks | 51 +++
tests/vm/centos.aarch64 | 227 ++++++++++++
tests/vm/conf_example_aarch64.yml | 51 +++
tests/vm/conf_example_x86.yml | 50 +++
tests/vm/fedora | 17 +-
tests/vm/freebsd | 16 +-
tests/vm/netbsd | 19 +-
tests/vm/openbsd | 17 +-
tests/vm/ubuntu.aarch64 | 68 ++++
tests/vm/ubuntu.i386 | 46 +--
tests/vm/ubuntuvm.py | 60 ++++
54 files changed, 1669 insertions(+), 328 deletions(-)
create mode 100644 .gitlab-ci.d/containers.yml
create mode 100644 python/qemu/console_socket.py
create mode 100644 tests/docker/dockerfiles/debian-all-test-cross.docker
create mode 100644 tests/vm/aarch64vm.py
create mode 100644 tests/vm/centos-8-aarch64.ks
create mode 100755 tests/vm/centos.aarch64
create mode 100644 tests/vm/conf_example_aarch64.yml
create mode 100644 tests/vm/conf_example_x86.yml
create mode 100755 tests/vm/ubuntu.aarch64
create mode 100644 tests/vm/ubuntuvm.py
--
2.20.1
^ permalink raw reply [flat|nested] 60+ messages in thread
* [PATCH v3 01/30] iotests: Fix 051 output after qdev_init_nofail() removal
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-26 18:13 ` [PATCH v3 02/30] crypto/linux_keyring: fix 'secret_keyring' configure test Alex Bennée
` (29 subsequent siblings)
30 siblings, 0 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, Kevin Wolf, Thomas Huth, berrange,
open list:Block layer core, Philippe Mathieu-Daudé,
richard.henderson, f4bug, Max Reitz, Alex Bennée, cota,
John Snow, aurelien
From: Philippe Mathieu-Daudé <philmd@redhat.com>
Commit 96927c744 replaced qdev_init_nofail() call by
isa_realize_and_unref() which has a different error
message. Update the test output accordingly.
Gitlab CI error after merging b77b5b3dc7:
https://gitlab.com/qemu-project/qemu/-/jobs/597414772#L4375
Reported-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200616154949.6586-1-philmd@redhat.com>
---
tests/qemu-iotests/051.pc.out | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tests/qemu-iotests/051.pc.out b/tests/qemu-iotests/051.pc.out
index 0ea80d35f0e..da8ad871876 100644
--- a/tests/qemu-iotests/051.pc.out
+++ b/tests/qemu-iotests/051.pc.out
@@ -142,7 +142,7 @@ QEMU X.Y.Z monitor - type 'help' for more information
Testing: -drive if=ide
QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) QEMU_PROG: Initialization of device ide-hd failed: Device needs media, but drive is empty
+(qemu) QEMU_PROG: Device needs media, but drive is empty
Testing: -drive if=virtio
QEMU X.Y.Z monitor - type 'help' for more information
@@ -214,7 +214,7 @@ QEMU X.Y.Z monitor - type 'help' for more information
Testing: -drive file=TEST_DIR/t.qcow2,if=ide,readonly=on
QEMU X.Y.Z monitor - type 'help' for more information
-(qemu) QEMU_PROG: Initialization of device ide-hd failed: Block node is read-only
+(qemu) QEMU_PROG: Block node is read-only
Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on
QEMU X.Y.Z monitor - type 'help' for more information
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 02/30] crypto/linux_keyring: fix 'secret_keyring' configure test
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
2020-06-26 18:13 ` [PATCH v3 01/30] iotests: Fix 051 output after qdev_init_nofail() removal Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-26 18:13 ` [PATCH v3 03/30] tests/vm: pass args through to BaseVM's __init__ Alex Bennée
` (28 subsequent siblings)
30 siblings, 0 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, Thomas Huth, berrange, Alex Bennée, richard.henderson,
f4bug, David Edmondson, cota, aurelien
From: David Edmondson <david.edmondson@oracle.com>
The configure test for 'secret_keyring' incorrectly checked the
'have_keyring' variable.
Fixes: 54e7aac0562452e4fcab65ca5001d030eef2de15
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20200618092636.71832-1-david.edmondson@oracle.com>
---
configure | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/configure b/configure
index ae8737d5a2c..25b65981142 100755
--- a/configure
+++ b/configure
@@ -6437,7 +6437,7 @@ EOF
fi
if test "$secret_keyring" != "no"
then
- if test "$have_keyring" == "yes"
+ if test "$have_keyring" = "yes"
then
secret_keyring=yes
else
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 03/30] tests/vm: pass args through to BaseVM's __init__
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
2020-06-26 18:13 ` [PATCH v3 01/30] iotests: Fix 051 output after qdev_init_nofail() removal Alex Bennée
2020-06-26 18:13 ` [PATCH v3 02/30] crypto/linux_keyring: fix 'secret_keyring' configure test Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-26 18:13 ` [PATCH v3 04/30] tests/vm: Add configuration to basevm.py Alex Bennée
` (27 subsequent siblings)
30 siblings, 0 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, berrange, Robert Foley, Alex Bennée, richard.henderson,
f4bug, Philippe Mathieu-Daudé,
cota, aurelien
From: Robert Foley <robert.foley@linaro.org>
Adding the args parameter to BaseVM's __init__.
We will shortly need to pass more parameters to the class
so let's just pass args rather than growing the parameter list.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-2-robert.foley@linaro.org>
---
tests/vm/basevm.py | 16 +++++++---------
1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/tests/vm/basevm.py b/tests/vm/basevm.py
index a80b616a08d..5a58e6c3930 100644
--- a/tests/vm/basevm.py
+++ b/tests/vm/basevm.py
@@ -61,11 +61,10 @@ class BaseVM(object):
# 4 is arbitrary, but greater than 2,
# since we found we need to wait more than twice as long.
tcg_ssh_timeout_multiplier = 4
- def __init__(self, debug=False, vcpus=None, genisoimage=None,
- build_path=None):
+ def __init__(self, args):
self._guest = None
- self._genisoimage = genisoimage
- self._build_path = build_path
+ self._genisoimage = args.genisoimage
+ self._build_path = args.build_path
self._tmpdir = os.path.realpath(tempfile.mkdtemp(prefix="vm-test-",
suffix=".tmp",
dir="."))
@@ -78,7 +77,7 @@ class BaseVM(object):
self._ssh_pub_key_file = os.path.join(self._tmpdir, "id_rsa.pub")
open(self._ssh_pub_key_file, "w").write(SSH_PUB_KEY)
- self.debug = debug
+ self.debug = args.debug
self._stderr = sys.stderr
self._devnull = open(os.devnull, "w")
if self.debug:
@@ -92,8 +91,8 @@ class BaseVM(object):
(",ipv6=no" if not self.ipv6 else ""),
"-device", "virtio-net-pci,netdev=vnet",
"-vnc", "127.0.0.1:0,to=20"]
- if vcpus and vcpus > 1:
- self._args += ["-smp", "%d" % vcpus]
+ if args.jobs and args.jobs > 1:
+ self._args += ["-smp", "%d" % args.jobs]
if kvm_available(self.arch):
self._args += ["-enable-kvm"]
else:
@@ -456,8 +455,7 @@ def main(vmcls):
return 1
logging.basicConfig(level=(logging.DEBUG if args.debug
else logging.WARN))
- vm = vmcls(debug=args.debug, vcpus=args.jobs,
- genisoimage=args.genisoimage, build_path=args.build_path)
+ vm = vmcls(args)
if args.build_image:
if os.path.exists(args.image) and not args.force:
sys.stderr.writelines(["Image file exists: %s\n" % args.image,
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 04/30] tests/vm: Add configuration to basevm.py
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (2 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 03/30] tests/vm: pass args through to BaseVM's __init__ Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-26 18:13 ` [PATCH v3 05/30] tests/vm: Added configuration file support Alex Bennée
` (26 subsequent siblings)
30 siblings, 0 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, berrange, Robert Foley, Alex Bennée, richard.henderson,
f4bug, Philippe Mathieu-Daudé,
cota, Peter Puhov, aurelien
From: Robert Foley <robert.foley@linaro.org>
Added use of a configuration to tests/vm/basevm.py.
The configuration provides parameters used to configure a VM.
This allows for providing alternate configurations to the VM being
created/launched. cpu, machine, memory, and NUMA configuration are all
examples of configuration which we might want to vary on the VM being created
or launched.
This will for example allow for creating an aarch64 vm.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-3-robert.foley@linaro.org>
---
tests/vm/basevm.py | 172 +++++++++++++++++++++++++++++++++++----------
1 file changed, 133 insertions(+), 39 deletions(-)
diff --git a/tests/vm/basevm.py b/tests/vm/basevm.py
index 5a58e6c3930..cfe20c58f7e 100644
--- a/tests/vm/basevm.py
+++ b/tests/vm/basevm.py
@@ -29,16 +29,41 @@ import tempfile
import shutil
import multiprocessing
import traceback
-
-SSH_KEY = open(os.path.join(os.path.dirname(__file__),
- "..", "keys", "id_rsa")).read()
-SSH_PUB_KEY = open(os.path.join(os.path.dirname(__file__),
- "..", "keys", "id_rsa.pub")).read()
-
+import shlex
+
+SSH_KEY_FILE = os.path.join(os.path.dirname(__file__),
+ "..", "keys", "id_rsa")
+SSH_PUB_KEY_FILE = os.path.join(os.path.dirname(__file__),
+ "..", "keys", "id_rsa.pub")
+
+# This is the standard configuration.
+# Any or all of these can be overridden by
+# passing in a config argument to the VM constructor.
+DEFAULT_CONFIG = {
+ 'cpu' : "max",
+ 'machine' : 'pc',
+ 'guest_user' : "qemu",
+ 'guest_pass' : "qemupass",
+ 'root_pass' : "qemupass",
+ 'ssh_key_file' : SSH_KEY_FILE,
+ 'ssh_pub_key_file': SSH_PUB_KEY_FILE,
+ 'memory' : "4G",
+ 'extra_args' : [],
+ 'qemu_args' : "",
+ 'dns' : "",
+ 'ssh_port' : 0,
+ 'install_cmds' : "",
+ 'boot_dev_type' : "block",
+ 'ssh_timeout' : 1,
+}
+BOOT_DEVICE = {
+ 'block' : "-drive file={},if=none,id=drive0,cache=writeback "\
+ "-device virtio-blk,drive=drive0,bootindex=0",
+ 'scsi' : "-device virtio-scsi-device,id=scsi "\
+ "-drive file={},format=raw,if=none,id=hd0 "\
+ "-device scsi-hd,drive=hd0,bootindex=0",
+}
class BaseVM(object):
- GUEST_USER = "qemu"
- GUEST_PASS = "qemupass"
- ROOT_PASS = "qemupass"
envvars = [
"https_proxy",
@@ -57,25 +82,38 @@ class BaseVM(object):
poweroff = "poweroff"
# enable IPv6 networking
ipv6 = True
+ # This is the timeout on the wait for console bytes.
+ socket_timeout = 120
# Scale up some timeouts under TCG.
# 4 is arbitrary, but greater than 2,
# since we found we need to wait more than twice as long.
tcg_ssh_timeout_multiplier = 4
- def __init__(self, args):
+ def __init__(self, args, config=None):
self._guest = None
self._genisoimage = args.genisoimage
self._build_path = args.build_path
+ # Allow input config to override defaults.
+ self._config = DEFAULT_CONFIG.copy()
+ if config != None:
+ self._config.update(config)
+ self.validate_ssh_keys()
self._tmpdir = os.path.realpath(tempfile.mkdtemp(prefix="vm-test-",
suffix=".tmp",
dir="."))
atexit.register(shutil.rmtree, self._tmpdir)
-
- self._ssh_key_file = os.path.join(self._tmpdir, "id_rsa")
- open(self._ssh_key_file, "w").write(SSH_KEY)
- subprocess.check_call(["chmod", "600", self._ssh_key_file])
-
- self._ssh_pub_key_file = os.path.join(self._tmpdir, "id_rsa.pub")
- open(self._ssh_pub_key_file, "w").write(SSH_PUB_KEY)
+ # Copy the key files to a temporary directory.
+ # Also chmod the key file to agree with ssh requirements.
+ self._config['ssh_key'] = \
+ open(self._config['ssh_key_file']).read().rstrip()
+ self._config['ssh_pub_key'] = \
+ open(self._config['ssh_pub_key_file']).read().rstrip()
+ self._ssh_tmp_key_file = os.path.join(self._tmpdir, "id_rsa")
+ open(self._ssh_tmp_key_file, "w").write(self._config['ssh_key'])
+ subprocess.check_call(["chmod", "600", self._ssh_tmp_key_file])
+
+ self._ssh_tmp_pub_key_file = os.path.join(self._tmpdir, "id_rsa.pub")
+ open(self._ssh_tmp_pub_key_file,
+ "w").write(self._config['ssh_pub_key'])
self.debug = args.debug
self._stderr = sys.stderr
@@ -84,11 +122,14 @@ class BaseVM(object):
self._stdout = sys.stdout
else:
self._stdout = self._devnull
+ netdev = "user,id=vnet,hostfwd=:127.0.0.1:{}-:22"
self._args = [ \
- "-nodefaults", "-m", "4G",
- "-cpu", "max",
- "-netdev", "user,id=vnet,hostfwd=:127.0.0.1:0-:22" +
- (",ipv6=no" if not self.ipv6 else ""),
+ "-nodefaults", "-m", self._config['memory'],
+ "-cpu", self._config['cpu'],
+ "-netdev",
+ netdev.format(self._config['ssh_port']) +
+ (",ipv6=no" if not self.ipv6 else "") +
+ (",dns=" + self._config['dns'] if self._config['dns'] else ""),
"-device", "virtio-net-pci,netdev=vnet",
"-vnc", "127.0.0.1:0,to=20"]
if args.jobs and args.jobs > 1:
@@ -99,6 +140,55 @@ class BaseVM(object):
logging.info("KVM not available, not using -enable-kvm")
self._data_args = []
+ if self._config['qemu_args'] != None:
+ qemu_args = self._config['qemu_args']
+ qemu_args = qemu_args.replace('\n',' ').replace('\r','')
+ # shlex groups quoted arguments together
+ # we need this to keep the quoted args together for when
+ # the QEMU command is issued later.
+ args = shlex.split(qemu_args)
+ self._config['extra_args'] = []
+ for arg in args:
+ if arg:
+ # Preserve quotes around arguments.
+ # shlex above takes them out, so add them in.
+ if " " in arg:
+ arg = '"{}"'.format(arg)
+ self._config['extra_args'].append(arg)
+
+ def validate_ssh_keys(self):
+ """Check to see if the ssh key files exist."""
+ if 'ssh_key_file' not in self._config or\
+ not os.path.exists(self._config['ssh_key_file']):
+ raise Exception("ssh key file not found.")
+ if 'ssh_pub_key_file' not in self._config or\
+ not os.path.exists(self._config['ssh_pub_key_file']):
+ raise Exception("ssh pub key file not found.")
+
+ def wait_boot(self, wait_string=None):
+ """Wait for the standard string we expect
+ on completion of a normal boot.
+ The user can also choose to override with an
+ alternate string to wait for."""
+ if wait_string is None:
+ if self.login_prompt is None:
+ raise Exception("self.login_prompt not defined")
+ wait_string = self.login_prompt
+ # Intentionally bump up the default timeout under TCG,
+ # since the console wait below takes longer.
+ timeout = self.socket_timeout
+ if not kvm_available(self.arch):
+ timeout *= 8
+ self.console_init(timeout=timeout)
+ self.console_wait(wait_string)
+
+ def __getattr__(self, name):
+ # Support direct access to config by key.
+ # for example, access self._config['cpu'] by self.cpu
+ if name.lower() in self._config.keys():
+ return self._config[name.lower()]
+ return object.__getattribute__(self, name)
+
def _download_with_cache(self, url, sha256sum=None, sha512sum=None):
def check_sha256sum(fname):
if not sha256sum:
@@ -130,8 +220,9 @@ class BaseVM(object):
"-t",
"-o", "StrictHostKeyChecking=no",
"-o", "UserKnownHostsFile=" + os.devnull,
- "-o", "ConnectTimeout=1",
- "-p", self.ssh_port, "-i", self._ssh_key_file]
+ "-o",
+ "ConnectTimeout={}".format(self._config["ssh_timeout"]),
+ "-p", self.ssh_port, "-i", self._ssh_tmp_key_file]
# If not in debug mode, set ssh to quiet mode to
# avoid printing the results of commands.
if not self.debug:
@@ -180,14 +271,14 @@ class BaseVM(object):
"virtio-blk,drive=%s,serial=%s,bootindex=1" % (name, name)]
def boot(self, img, extra_args=[]):
- args = self._args + [
- "-drive", "file=%s,if=none,id=drive0,cache=writeback" % img,
- "-device", "virtio-blk,drive=drive0,bootindex=0"]
- args += self._data_args + extra_args
+ boot_dev = BOOT_DEVICE[self._config['boot_dev_type']]
+ boot_params = boot_dev.format(img)
+ args = self._args + boot_params.split(' ')
+ args += self._data_args + extra_args + self._config['extra_args']
logging.debug("QEMU args: %s", " ".join(args))
qemu_path = get_qemu_path(self.arch, self._build_path)
guest = QEMUMachine(binary=qemu_path, args=args)
- guest.set_machine('pc')
+ guest.set_machine(self._config['machine'])
guest.set_console()
try:
guest.launch()
@@ -301,7 +392,8 @@ class BaseVM(object):
self.console_send(command)
def console_ssh_init(self, prompt, user, pw):
- sshkey_cmd = "echo '%s' > .ssh/authorized_keys\n" % SSH_PUB_KEY.rstrip()
+ sshkey_cmd = "echo '%s' > .ssh/authorized_keys\n" \
+ % self._config['ssh_pub_key'].rstrip()
self.console_wait_send("login:", "%s\n" % user)
self.console_wait_send("Password:", "%s\n" % pw)
self.console_wait_send(prompt, "mkdir .ssh\n")
@@ -360,23 +452,23 @@ class BaseVM(object):
"local-hostname: {}-guest\n".format(name)])
mdata.close()
udata = open(os.path.join(cidir, "user-data"), "w")
- print("guest user:pw {}:{}".format(self.GUEST_USER,
- self.GUEST_PASS))
+ print("guest user:pw {}:{}".format(self._config['guest_user'],
+ self._config['guest_pass']))
udata.writelines(["#cloud-config\n",
"chpasswd:\n",
" list: |\n",
- " root:%s\n" % self.ROOT_PASS,
- " %s:%s\n" % (self.GUEST_USER,
- self.GUEST_PASS),
+ " root:%s\n" % self._config['root_pass'],
+ " %s:%s\n" % (self._config['guest_user'],
+ self._config['guest_pass']),
" expire: False\n",
"users:\n",
- " - name: %s\n" % self.GUEST_USER,
+ " - name: %s\n" % self._config['guest_user'],
" sudo: ALL=(ALL) NOPASSWD:ALL\n",
" ssh-authorized-keys:\n",
- " - %s\n" % SSH_PUB_KEY,
+ " - %s\n" % self._config['ssh_pub_key'],
" - name: root\n",
" ssh-authorized-keys:\n",
- " - %s\n" % SSH_PUB_KEY,
+ " - %s\n" % self._config['ssh_pub_key'],
"locale: en_US.UTF-8\n"])
proxy = os.environ.get("http_proxy")
if not proxy is None:
@@ -447,15 +539,17 @@ def parse_args(vmcls):
parser.disable_interspersed_args()
return parser.parse_args()
-def main(vmcls):
+def main(vmcls, config=None):
try:
+ if config == None:
+ config = {}
args, argv = parse_args(vmcls)
if not argv and not args.build_qemu and not args.build_image:
print("Nothing to do?")
return 1
logging.basicConfig(level=(logging.DEBUG if args.debug
else logging.WARN))
- vm = vmcls(args)
+ vm = vmcls(args, config=config)
if args.build_image:
if os.path.exists(args.image) and not args.force:
sys.stderr.writelines(["Image file exists: %s\n" % args.image,
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 05/30] tests/vm: Added configuration file support
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (3 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 04/30] tests/vm: Add configuration to basevm.py Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-26 18:13 ` [PATCH v3 06/30] tests/vm: Add common Ubuntu python module Alex Bennée
` (25 subsequent siblings)
30 siblings, 0 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, berrange, Robert Foley, Alex Bennée, richard.henderson,
f4bug, Philippe Mathieu-Daudé,
cota, Peter Puhov, aurelien
From: Robert Foley <robert.foley@linaro.org>
Changes to tests/vm/basevm.py to allow accepting a configuration file
as a parameter. Allows for specifying VM options such as
cpu, machine, memory, and arbitrary qemu arguments for specifying options
such as NUMA configuration.
Also added an example conf_example_aarch64.yml and conf_example_x86.yml.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-4-robert.foley@linaro.org>
---
configure | 9 ++++++
tests/vm/Makefile.include | 6 ++++
tests/vm/basevm.py | 40 +++++++++++++++++++++++-
tests/vm/conf_example_aarch64.yml | 51 +++++++++++++++++++++++++++++++
tests/vm/conf_example_x86.yml | 50 ++++++++++++++++++++++++++++++
5 files changed, 155 insertions(+), 1 deletion(-)
create mode 100644 tests/vm/conf_example_aarch64.yml
create mode 100644 tests/vm/conf_example_x86.yml
diff --git a/configure b/configure
index 25b65981142..a9850b1fbea 100755
--- a/configure
+++ b/configure
@@ -959,6 +959,13 @@ do
fi
done
+# Check for existence of python3 yaml, needed to
+# import yaml config files into vm-build.
+python_yaml="no"
+if $(python3 -c "import yaml" 2> /dev/null); then
+ python_yaml="yes"
+fi
+
: ${smbd=${SMBD-/usr/sbin/smbd}}
# Default objcc to clang if available, otherwise use CC
@@ -6819,6 +6826,7 @@ if test "$docs" != "no"; then
echo "sphinx-build $sphinx_build"
fi
echo "genisoimage $genisoimage"
+echo "python_yaml $python_yaml"
echo "slirp support $slirp $(echo_version $slirp $slirp_version)"
if test "$slirp" != "no" ; then
echo "smbd $smbd"
@@ -7899,6 +7907,7 @@ echo "PYTHON=$python" >> $config_host_mak
echo "SPHINX_BUILD=$sphinx_build" >> $config_host_mak
echo "SPHINX_WERROR=$sphinx_werror" >> $config_host_mak
echo "GENISOIMAGE=$genisoimage" >> $config_host_mak
+echo "PYTHON_YAML=$python_yaml" >> $config_host_mak
echo "CC=$cc" >> $config_host_mak
if $iasl -h > /dev/null 2>&1; then
echo "IASL=$iasl" >> $config_host_mak
diff --git a/tests/vm/Makefile.include b/tests/vm/Makefile.include
index a253aba4579..f6c3892bb28 100644
--- a/tests/vm/Makefile.include
+++ b/tests/vm/Makefile.include
@@ -44,6 +44,12 @@ endif
@echo " QEMU_LOCAL=1 - Use QEMU binary local to this build."
@echo " QEMU=/path/to/qemu - Change path to QEMU binary"
@echo " QEMU_IMG=/path/to/qemu-img - Change path to qemu-img tool"
+ifeq ($(PYTHON_YAML),yes)
+ @echo " QEMU_CONFIG=/path/conf.yml - Change path to VM configuration .yml file."
+else
+ @echo " (install python3-yaml to enable support for yaml file to configure a VM.)"
+endif
+ @echo " See conf_example_*.yml for file format details."
vm-build-all: $(addprefix vm-build-, $(IMAGES))
diff --git a/tests/vm/basevm.py b/tests/vm/basevm.py
index cfe20c58f7e..fa56fbbb4b6 100644
--- a/tests/vm/basevm.py
+++ b/tests/vm/basevm.py
@@ -481,7 +481,6 @@ class BaseVM(object):
cwd=cidir,
stdin=self._devnull, stdout=self._stdout,
stderr=self._stdout)
-
return os.path.join(cidir, "cloud-init.iso")
def get_qemu_path(arch, build_path=None):
@@ -497,6 +496,41 @@ def get_qemu_path(arch, build_path=None):
qemu_path = "qemu-system-" + arch
return qemu_path
+def parse_config(config, args):
+ """ Parse yaml config and populate our config structure.
+ The yaml config allows the user to override the
+ defaults for VM parameters. In many cases these
+ defaults can be overridden without rebuilding the VM."""
+ if args.config:
+ config_file = args.config
+ elif 'QEMU_CONFIG' in os.environ:
+ config_file = os.environ['QEMU_CONFIG']
+ else:
+ return config
+ if not os.path.exists(config_file):
+ raise Exception("config file {} does not exist".format(config_file))
+ # We gracefully handle importing the yaml module
+ # since it might not be installed.
+ # If we are here it means the user supplied a .yml file,
+ # so if the yaml module is not installed we will exit with error.
+ try:
+ import yaml
+ except ImportError:
+ print("The python3-yaml package is needed "\
+ "to support config.yaml files")
+ # Instead of raising an exception we exit to avoid
+ # a raft of messy (expected) errors to stdout.
+ exit(1)
+ with open(config_file) as f:
+ yaml_dict = yaml.safe_load(f)
+
+ if 'qemu-conf' in yaml_dict:
+ config.update(yaml_dict['qemu-conf'])
+ else:
+ raise Exception("config file {} is not valid"\
+ " missing qemu-conf".format(config_file))
+ return config
+
def parse_args(vmcls):
def get_default_jobs():
@@ -536,6 +570,9 @@ def parse_args(vmcls):
help="run tests with a snapshot")
parser.add_option("--genisoimage", default="genisoimage",
help="iso imaging tool")
+ parser.add_option("--config", "-c", default=None,
+ help="Provide config yaml for configuration. "\
+ "See config_example.yaml for example.")
parser.disable_interspersed_args()
return parser.parse_args()
@@ -547,6 +584,7 @@ def main(vmcls, config=None):
if not argv and not args.build_qemu and not args.build_image:
print("Nothing to do?")
return 1
+ config = parse_config(config, args)
logging.basicConfig(level=(logging.DEBUG if args.debug
else logging.WARN))
vm = vmcls(args, config=config)
diff --git a/tests/vm/conf_example_aarch64.yml b/tests/vm/conf_example_aarch64.yml
new file mode 100644
index 00000000000..9d44ae356f7
--- /dev/null
+++ b/tests/vm/conf_example_aarch64.yml
@@ -0,0 +1,51 @@
+#
+# Example yaml for use by any of the scripts in tests/vm.
+# Can be provided as an environment variable QEMU_CONFIG
+#
+qemu-conf:
+
+ # If any of the below are not provided, we will just use the qemu defaults.
+
+ # Login username and password(has to be sudo enabled)
+ guest_user: qemu
+ guest_pass: "qemupass"
+
+ # Password for root user can be different from guest.
+ root_pass: "qemupass"
+
+ # If one key is provided, both must be provided.
+ #ssh_key: /complete/path/of/your/keyfile/id_rsa
+ #ssh_pub_key: /complete/path/of/your/keyfile/id_rsa.pub
+
+ cpu: max
+ machine: virt,gic-version=max
+ memory: 16G
+
+ # The below is a example for how to configure NUMA topology with
+ # 4 NUMA nodes and 2 different NUMA distances.
+ qemu_args: "-smp cpus=16,sockets=2,cores=8
+ -numa node,cpus=0-3,nodeid=0 -numa node,cpus=4-7,nodeid=1
+ -numa node,cpus=8-11,nodeid=2 -numa node,cpus=12-15,nodeid=3
+ -numa dist,src=0,dst=1,val=15 -numa dist,src=2,dst=3,val=15
+ -numa dist,src=0,dst=2,val=20 -numa dist,src=0,dst=3,val=20
+ -numa dist,src=1,dst=2,val=20 -numa dist,src=1,dst=3,val=20"
+
+ # By default we do not set the DNS.
+ # You override the defaults by setting the below.
+ #dns: 1.234.567.89
+
+ # By default we will use a "block" device, but
+ # you can also boot from a "scsi" device.
+ # Just keep in mind your scripts might need to change
+ # As you will have /dev/sda instead of /dev/vda (for block device)
+ boot_dev_type: "block"
+
+ # By default the ssh port is not fixed.
+ # A fixed ssh port makes it easier for automated tests.
+ #ssh_port: 5555
+
+ # To install a different set of packages, provide a command to issue
+ #install_cmds: "apt-get update ; apt-get build-dep -y qemu"
+
+ # Or to skip the install entirely, just provide ""
+ #install_cmds: ""
diff --git a/tests/vm/conf_example_x86.yml b/tests/vm/conf_example_x86.yml
new file mode 100644
index 00000000000..78d3f5830fa
--- /dev/null
+++ b/tests/vm/conf_example_x86.yml
@@ -0,0 +1,50 @@
+#
+# Example yaml for use by any of the x86 based scripts in tests/vm.
+# Can be provided as an environment variable QEMU_CONFIG
+#
+qemu-conf:
+
+ # If any of the below are not provided, we will just use the qemu defaults.
+
+ # Login username and password(has to be sudo enabled)
+ guest_user: "qemu"
+ guest_pass: "qemupass"
+
+ # Password for root user can be different from guest.
+ root_pass: "qemupass"
+
+ # Provide default ssh keys of current user.
+ # You need to edit the below for your user.
+ #ssh_key_file: /home/<user>/.ssh/id_rsa
+ #ssh_pub_key_file: /home/<user>/.ssh/id_rsa.pub
+
+ cpu: max
+ machine: pc
+ memory: 8G
+
+ # The below is a example for how to configure NUMA topology with
+ # 4 NUMA nodes and 2 different NUMA distances.
+ qemu_args: "-smp cpus=8,sockets=2,cores=4
+ -object memory-backend-ram,size=4G,policy=bind,host-nodes=0,id=ram-node0
+ -object memory-backend-ram,size=4G,policy=bind,host-nodes=0,id=ram-node1
+ -object memory-backend-ram,size=4G,policy=bind,host-nodes=1,id=ram-node2
+ -object memory-backend-ram,size=4G,policy=bind,host-nodes=1,id=ram-node3
+ -numa node,cpus=0-1,nodeid=0 -numa node,cpus=2-3,nodeid=1
+ -numa node,cpus=4-5,nodeid=2 -numa node,cpus=6-7,nodeid=3
+ -numa dist,src=0,dst=1,val=15 -numa dist,src=2,dst=3,val=15
+ -numa dist,src=0,dst=2,val=20 -numa dist,src=0,dst=3,val=20
+ -numa dist,src=1,dst=2,val=20 -numa dist,src=1,dst=3,val=20"
+
+ # By default we do not set the DNS.
+ # You override the defaults by setting the below.
+ #dns: "1.234.567.89"
+
+ # By default we will use a "block" device, but
+ # you can also boot from a "scsi" device.
+ # Just keep in mind your scripts might need to change
+ # As you will have /dev/sda instead of /dev/vda (for block device)
+ boot_dev_type: "block"
+
+ # By default the ssh port is not fixed.
+ # A fixed ssh port makes it easier for automated tests.
+ ssh_port: 5555
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 06/30] tests/vm: Add common Ubuntu python module
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (4 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 05/30] tests/vm: Added configuration file support Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-26 18:13 ` [PATCH v3 07/30] tests/vm: Added a new script for ubuntu.aarch64 Alex Bennée
` (24 subsequent siblings)
30 siblings, 0 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, berrange, Robert Foley, Philippe Mathieu-Daudé,
richard.henderson, f4bug, Alex Bennée, cota, aurelien
From: Robert Foley <robert.foley@linaro.org>
Add a common Ubuntu python module and make use of
it with the ubuntu.i386 script.
This is preparation for adding an Ubuntu script
ubuntu.aarch64. Splitting out the common
logic such as build_image() will reduce duplication.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-5-robert.foley@linaro.org>
---
tests/vm/ubuntu.i386 | 46 +++++++++------------------------
tests/vm/ubuntuvm.py | 60 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 72 insertions(+), 34 deletions(-)
create mode 100644 tests/vm/ubuntuvm.py
diff --git a/tests/vm/ubuntu.i386 b/tests/vm/ubuntu.i386
index 24527cc78c7..5ce72610a6c 100755
--- a/tests/vm/ubuntu.i386
+++ b/tests/vm/ubuntu.i386
@@ -11,15 +11,22 @@
# the COPYING file in the top-level directory.
#
-import os
import sys
-import subprocess
import basevm
-import time
+import ubuntuvm
-class UbuntuX86VM(basevm.BaseVM):
+DEFAULT_CONFIG = {
+ 'install_cmds' : "apt-get update,"\
+ "apt-get build-dep -y qemu,"\
+ "apt-get install -y libfdt-dev language-pack-en",
+}
+
+class UbuntuX86VM(ubuntuvm.UbuntuVM):
name = "ubuntu.i386"
arch = "i386"
+ image_link="https://cloud-images.ubuntu.com/releases/bionic/"\
+ "release-20191114/ubuntu-18.04-server-cloudimg-i386.img"
+ image_sha256="28969840626d1ea80bb249c08eef1a4533e8904aa51a327b40f37ac4b4ff04ef"
BUILD_SCRIPT = """
set -e;
cd $(mktemp -d);
@@ -29,34 +36,5 @@ class UbuntuX86VM(basevm.BaseVM):
make --output-sync {target} -j{jobs} {verbose};
"""
- def build_image(self, img):
- cimg = self._download_with_cache(
- "https://cloud-images.ubuntu.com/releases/bionic/release-20191114/ubuntu-18.04-server-cloudimg-i386.img",
- sha256sum="28969840626d1ea80bb249c08eef1a4533e8904aa51a327b40f37ac4b4ff04ef")
- img_tmp = img + ".tmp"
- subprocess.check_call(["cp", "-f", cimg, img_tmp])
- self.exec_qemu_img("resize", img_tmp, "50G")
- self.boot(img_tmp, extra_args = [
- "-device", "VGA",
- "-cdrom", self.gen_cloud_init_iso()
- ])
- self.wait_ssh()
- self.ssh_root_check("touch /etc/cloud/cloud-init.disabled")
- self.ssh_root_check("apt-get update")
- self.ssh_root_check("apt-get install -y cloud-initramfs-growroot")
- # Don't check the status in case the guest hang up too quickly
- self.ssh_root("sync && reboot")
- time.sleep(5)
- self.wait_ssh()
- # The previous update sometimes doesn't survive a reboot, so do it again
- self.ssh_root_check("sed -ie s/^#\ deb-src/deb-src/g /etc/apt/sources.list")
- self.ssh_root_check("apt-get update")
- self.ssh_root_check("apt-get build-dep -y qemu")
- self.ssh_root_check("apt-get install -y libfdt-dev language-pack-en")
- self.ssh_root("poweroff")
- self.wait()
- os.rename(img_tmp, img)
- return 0
-
if __name__ == "__main__":
- sys.exit(basevm.main(UbuntuX86VM))
+ sys.exit(basevm.main(UbuntuX86VM, DEFAULT_CONFIG))
diff --git a/tests/vm/ubuntuvm.py b/tests/vm/ubuntuvm.py
new file mode 100644
index 00000000000..6689ad87aa8
--- /dev/null
+++ b/tests/vm/ubuntuvm.py
@@ -0,0 +1,60 @@
+#!/usr/bin/env python3
+#
+# Ubuntu VM testing library
+#
+# Copyright 2017 Red Hat Inc.
+# Copyright 2020 Linaro
+#
+# Authors:
+# Robert Foley <robert.foley@linaro.org>
+# Originally based on ubuntu.i386 Fam Zheng <famz@redhat.com>
+#
+# This code is licensed under the GPL version 2 or later. See
+# the COPYING file in the top-level directory.
+
+import os
+import subprocess
+import basevm
+
+class UbuntuVM(basevm.BaseVM):
+
+ def __init__(self, args, config=None):
+ self.login_prompt = "ubuntu-{}-guest login:".format(self.arch)
+ basevm.BaseVM.__init__(self, args, config)
+
+ def build_image(self, img):
+ """Build an Ubuntu VM image. The child class will
+ define the install_cmds to init the VM."""
+ os_img = self._download_with_cache(self.image_link,
+ sha256sum=self.image_sha256)
+ img_tmp = img + ".tmp"
+ subprocess.check_call(["cp", "-f", os_img, img_tmp])
+ self.exec_qemu_img("resize", img_tmp, "+50G")
+ ci_img = self.gen_cloud_init_iso()
+
+ self.boot(img_tmp, extra_args = [ "-device", "VGA", "-cdrom", ci_img, ])
+
+ # First command we issue is fix for slow ssh login.
+ self.wait_ssh(wait_root=True,
+ cmd="chmod -x /etc/update-motd.d/*")
+ # Wait for cloud init to finish
+ self.wait_ssh(wait_root=True,
+ cmd="ls /var/lib/cloud/instance/boot-finished")
+ self.ssh_root("touch /etc/cloud/cloud-init.disabled")
+ # Disable auto upgrades.
+ # We want to keep the VM system state stable.
+ self.ssh_root('sed -ie \'s/"1"/"0"/g\' '\
+ '/etc/apt/apt.conf.d/20auto-upgrades')
+ self.ssh_root("sed -ie s/^#\ deb-src/deb-src/g /etc/apt/sources.list")
+
+ # If the user chooses not to do the install phase,
+ # then we will jump right to the graceful shutdown
+ if self._config['install_cmds'] != "":
+ # Issue the install commands.
+ # This can be overriden by the user in the config .yml.
+ install_cmds = self._config['install_cmds'].split(',')
+ for cmd in install_cmds:
+ self.ssh_root(cmd)
+ self.graceful_shutdown()
+ os.rename(img_tmp, img)
+ return 0
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 07/30] tests/vm: Added a new script for ubuntu.aarch64.
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (5 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 06/30] tests/vm: Add common Ubuntu python module Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-26 18:13 ` [PATCH v3 08/30] tests/vm: Added a new script for centos.aarch64 Alex Bennée
` (23 subsequent siblings)
30 siblings, 0 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, berrange, Robert Foley, Alex Bennée, richard.henderson,
f4bug, Philippe Mathieu-Daudé,
cota, Peter Puhov, aurelien
From: Robert Foley <robert.foley@linaro.org>
ubuntu.aarch64 provides a script to create an Ubuntu 18.04 VM.
Another new file is also added aarch64vm.py, which is a module with
common methods used by aarch64 VMs, such as how to create the
flash images.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-6-robert.foley@linaro.org>
---
configure | 20 +++++++
tests/vm/Makefile.include | 11 ++++
tests/vm/aarch64vm.py | 106 ++++++++++++++++++++++++++++++++++++++
tests/vm/basevm.py | 12 +++++
tests/vm/ubuntu.aarch64 | 68 ++++++++++++++++++++++++
5 files changed, 217 insertions(+)
create mode 100644 tests/vm/aarch64vm.py
create mode 100755 tests/vm/ubuntu.aarch64
diff --git a/configure b/configure
index a9850b1fbea..0750049e017 100755
--- a/configure
+++ b/configure
@@ -418,6 +418,7 @@ prefix="/usr/local"
mandir="\${prefix}/share/man"
datadir="\${prefix}/share"
firmwarepath="\${prefix}/share/qemu-firmware"
+efi_aarch64=""
qemu_docdir="\${prefix}/share/doc/qemu"
bindir="\${prefix}/bin"
libdir="\${prefix}/lib"
@@ -1108,6 +1109,8 @@ for opt do
;;
--firmwarepath=*) firmwarepath="$optarg"
;;
+ --efi-aarch64=*) efi_aarch64="$optarg"
+ ;;
--host=*|--build=*|\
--disable-dependency-tracking|\
--sbindir=*|--sharedstatedir=*|\
@@ -1782,6 +1785,7 @@ Advanced options (experts only):
--sysconfdir=PATH install config in PATH$confsuffix
--localstatedir=PATH install local state in PATH (set at runtime on win32)
--firmwarepath=PATH search PATH for firmware files
+ --efi-aarch64=PATH PATH of efi file to use for aarch64 VMs.
--with-confsuffix=SUFFIX suffix for QEMU data inside datadir/libdir/sysconfdir [$confsuffix]
--with-pkgversion=VERS use specified string as sub-version of the package
--enable-debug enable common debug build options
@@ -3600,6 +3604,20 @@ EOF
fi
fi
+############################################
+# efi-aarch64 probe
+# Check for efi files needed by aarch64 VMs.
+# By default we will use the efi included with QEMU.
+# Allow user to override the path for efi also.
+if ! test -f "$efi_aarch64"; then
+ if test -f $source_path/pc-bios/edk2-aarch64-code.fd.bz2; then
+ # valid after build
+ efi_aarch64=$PWD/pc-bios/edk2-aarch64-code.fd
+ else
+ efi_aarch64=""
+ fi
+fi
+
##########################################
# libcap-ng library probe
if test "$cap_ng" != "no" ; then
@@ -6826,6 +6844,7 @@ if test "$docs" != "no"; then
echo "sphinx-build $sphinx_build"
fi
echo "genisoimage $genisoimage"
+echo "efi_aarch64 $efi_aarch64"
echo "python_yaml $python_yaml"
echo "slirp support $slirp $(echo_version $slirp $slirp_version)"
if test "$slirp" != "no" ; then
@@ -7907,6 +7926,7 @@ echo "PYTHON=$python" >> $config_host_mak
echo "SPHINX_BUILD=$sphinx_build" >> $config_host_mak
echo "SPHINX_WERROR=$sphinx_werror" >> $config_host_mak
echo "GENISOIMAGE=$genisoimage" >> $config_host_mak
+echo "EFI_AARCH64=$efi_aarch64" >> $config_host_mak
echo "PYTHON_YAML=$python_yaml" >> $config_host_mak
echo "CC=$cc" >> $config_host_mak
if $iasl -h > /dev/null 2>&1; then
diff --git a/tests/vm/Makefile.include b/tests/vm/Makefile.include
index f6c3892bb28..4fa292765d5 100644
--- a/tests/vm/Makefile.include
+++ b/tests/vm/Makefile.include
@@ -5,6 +5,9 @@
IMAGES := freebsd netbsd openbsd centos fedora
ifneq ($(GENISOIMAGE),)
IMAGES += ubuntu.i386 centos
+ifneq ($(EFI_AARCH64),)
+IMAGES += ubuntu.aarch64
+endif
endif
IMAGES_DIR := $(HOME)/.cache/qemu-vm/images
@@ -23,6 +26,11 @@ vm-help vm-test:
ifneq ($(GENISOIMAGE),)
@echo " vm-build-centos - Build QEMU in CentOS VM, with Docker"
@echo " vm-build-ubuntu.i386 - Build QEMU in ubuntu i386 VM"
+ifneq ($(EFI_AARCH64),)
+ @echo " vm-build-ubuntu.aarch64 - Build QEMU in ubuntu aarch64 VM"
+else
+ @echo " (to build centos/ubuntu aarch64 images use configure --efi-aarch64)"
+endif
else
@echo " (install genisoimage to build centos/ubuntu images)"
endif
@@ -65,6 +73,7 @@ $(IMAGES_DIR)/%.img: $(SRC_PATH)/tests/vm/% \
$(if $(V)$(DEBUG), --debug) \
$(if $(GENISOIMAGE),--genisoimage $(GENISOIMAGE)) \
$(if $(QEMU_LOCAL),--build-path $(BUILD_DIR)) \
+ $(if $(EFI_AARCH64),--efi-aarch64 $(EFI_AARCH64)) \
--image "$@" \
--force \
--build-image $@, \
@@ -80,6 +89,7 @@ vm-build-%: $(IMAGES_DIR)/%.img
$(if $(J),--jobs $(J)) \
$(if $(V),--verbose) \
$(if $(QEMU_LOCAL),--build-path $(BUILD_DIR)) \
+ $(if $(EFI_AARCH64),--efi-aarch64 $(EFI_AARCH64)) \
--image "$<" \
$(if $(BUILD_TARGET),--build-target $(BUILD_TARGET)) \
--snapshot \
@@ -102,6 +112,7 @@ vm-boot-ssh-%: $(IMAGES_DIR)/%.img
$(if $(J),--jobs $(J)) \
$(if $(V)$(DEBUG), --debug) \
$(if $(QEMU_LOCAL),--build-path $(BUILD_DIR)) \
+ $(if $(EFI_AARCH64),--efi-aarch64 $(EFI_AARCH64)) \
--image "$<" \
--interactive \
false, \
diff --git a/tests/vm/aarch64vm.py b/tests/vm/aarch64vm.py
new file mode 100644
index 00000000000..bb04cb19c91
--- /dev/null
+++ b/tests/vm/aarch64vm.py
@@ -0,0 +1,106 @@
+#!/usr/bin/env python3
+#
+# VM testing aarch64 library
+#
+# Copyright 2020 Linaro
+#
+# Authors:
+# Robert Foley <robert.foley@linaro.org>
+#
+# This code is licensed under the GPL version 2 or later. See
+# the COPYING file in the top-level directory.
+#
+import os
+import sys
+import subprocess
+import basevm
+from qemu.accel import kvm_available
+
+# This is the config needed for current version of QEMU.
+# This works for both kvm and tcg.
+CURRENT_CONFIG = {
+ 'cpu' : "max",
+ 'machine' : "virt,gic-version=max",
+}
+
+# The minimum minor version of QEMU we will support with aarch64 VMs is 3.
+# QEMU versions less than 3 have various issues running these VMs.
+QEMU_AARCH64_MIN_VERSION = 3
+
+# The DEFAULT_CONFIG will default to a version of
+# parameters that works for backwards compatibility.
+DEFAULT_CONFIG = {'kvm' : {'cpu' : "host",
+ 'machine' : "virt,gic-version=host"},
+ 'tcg' : {'cpu' : "cortex-a57",
+ 'machine' : "virt"},
+}
+
+def get_config_defaults(vmcls, default_config):
+ """Fetch the configuration defaults for this VM,
+ taking into consideration the defaults for
+ aarch64 first, followed by the defaults for this VM."""
+ config = default_config
+ config.update(aarch_get_config_defaults(vmcls))
+ return config
+
+def aarch_get_config_defaults(vmcls):
+ """Set the defaults for current version of QEMU."""
+ config = CURRENT_CONFIG
+ args, argv = basevm.parse_args(vmcls)
+ qemu_path = basevm.get_qemu_path(vmcls.arch, args.build_path)
+ qemu_version = basevm.get_qemu_version(qemu_path)
+ if qemu_version < QEMU_AARCH64_MIN_VERSION:
+ error = "\nThis major version of QEMU {} is to old for aarch64 VMs.\n"\
+ "The major version must be at least {}.\n"\
+ "To continue with the current build of QEMU, "\
+ "please restart with QEMU_LOCAL=1 .\n"
+ print(error.format(qemu_version, QEMU_AARCH64_MIN_VERSION))
+ exit(1)
+ if qemu_version == QEMU_AARCH64_MIN_VERSION:
+ # We have an older version of QEMU,
+ # set the config values for backwards compatibility.
+ if kvm_available('aarch64'):
+ config.update(DEFAULT_CONFIG['kvm'])
+ else:
+ config.update(DEFAULT_CONFIG['tcg'])
+ return config
+
+def create_flash_images(flash_dir="./", efi_img=""):
+ """Creates the appropriate pflash files
+ for an aarch64 VM."""
+ flash0_path = get_flash_path(flash_dir, "flash0")
+ flash1_path = get_flash_path(flash_dir, "flash1")
+ fd_null = open(os.devnull, 'w')
+ subprocess.check_call(["dd", "if=/dev/zero", "of={}".format(flash0_path),
+ "bs=1M", "count=64"],
+ stdout=fd_null, stderr=subprocess.STDOUT)
+ # A reliable way to get the QEMU EFI image is via an installed package or
+ # via the bios included with qemu.
+ if not os.path.exists(efi_img):
+ sys.stderr.write("*** efi argument is invalid ({})\n".format(efi_img))
+ sys.stderr.write("*** please check --efi-aarch64 argument or "\
+ "install qemu-efi-aarch64 package\n")
+ exit(3)
+ subprocess.check_call(["dd", "if={}".format(efi_img),
+ "of={}".format(flash0_path),
+ "conv=notrunc"],
+ stdout=fd_null, stderr=subprocess.STDOUT)
+ subprocess.check_call(["dd", "if=/dev/zero",
+ "of={}".format(flash1_path),
+ "bs=1M", "count=64"],
+ stdout=fd_null, stderr=subprocess.STDOUT)
+ fd_null.close()
+
+def get_pflash_args(flash_dir="./"):
+ """Returns a string that can be used to
+ boot qemu using the appropriate pflash files
+ for aarch64."""
+ flash0_path = get_flash_path(flash_dir, "flash0")
+ flash1_path = get_flash_path(flash_dir, "flash1")
+ pflash_args_str = "-drive file={},format=raw,if=pflash "\
+ "-drive file={},format=raw,if=pflash"
+ pflash_args = pflash_args_str.format(flash0_path, flash1_path)
+ return pflash_args.split(" ")
+
+def get_flash_path(flash_dir, name):
+ return os.path.join(flash_dir, "{}.img".format(name))
diff --git a/tests/vm/basevm.py b/tests/vm/basevm.py
index fa56fbbb4b6..5fd66f6b26a 100644
--- a/tests/vm/basevm.py
+++ b/tests/vm/basevm.py
@@ -92,6 +92,7 @@ class BaseVM(object):
self._guest = None
self._genisoimage = args.genisoimage
self._build_path = args.build_path
+ self._efi_aarch64 = args.efi_aarch64
# Allow input config to override defaults.
self._config = DEFAULT_CONFIG.copy()
if config != None:
@@ -496,6 +497,14 @@ def get_qemu_path(arch, build_path=None):
qemu_path = "qemu-system-" + arch
return qemu_path
+def get_qemu_version(qemu_path):
+ """Get the version number from the current QEMU,
+ and return the major number."""
+ output = subprocess.check_output([qemu_path, '--version'])
+ version_line = output.decode("utf-8")
+ version_num = re.split(' |\(', version_line)[3].split('.')[0]
+ return int(version_num)
+
def parse_config(config, args):
""" Parse yaml config and populate our config structure.
The yaml config allows the user to override the
@@ -573,6 +582,9 @@ def parse_args(vmcls):
parser.add_option("--config", "-c", default=None,
help="Provide config yaml for configuration. "\
"See config_example.yaml for example.")
+ parser.add_option("--efi-aarch64",
+ default="/usr/share/qemu-efi-aarch64/QEMU_EFI.fd",
+ help="Path to efi image for aarch64 VMs.")
parser.disable_interspersed_args()
return parser.parse_args()
diff --git a/tests/vm/ubuntu.aarch64 b/tests/vm/ubuntu.aarch64
new file mode 100755
index 00000000000..21d454c27f1
--- /dev/null
+++ b/tests/vm/ubuntu.aarch64
@@ -0,0 +1,68 @@
+#!/usr/bin/env python3
+#
+# Ubuntu aarch64 image
+#
+# Copyright 2020 Linaro
+#
+# Authors:
+# Robert Foley <robert.foley@linaro.org>
+# Originally based on ubuntu.i386 Fam Zheng <famz@redhat.com>
+#
+# This code is licensed under the GPL version 2 or later. See
+# the COPYING file in the top-level directory.
+#
+
+import sys
+import basevm
+import aarch64vm
+import ubuntuvm
+
+DEFAULT_CONFIG = {
+ 'cpu' : "cortex-a57",
+ 'machine' : "virt,gic-version=3",
+ 'install_cmds' : "apt-get update,"\
+ "apt-get build-dep -y --arch-only qemu,"\
+ "apt-get install -y libfdt-dev pkg-config language-pack-en",
+ # We increase beyond the default time since during boot
+ # it can take some time (many seconds) to log into the VM
+ # especially using softmmu.
+ 'ssh_timeout' : 60,
+}
+
+class UbuntuAarch64VM(ubuntuvm.UbuntuVM):
+ name = "ubuntu.aarch64"
+ arch = "aarch64"
+ image_name = "ubuntu-18.04-server-cloudimg-arm64.img"
+ image_link = "https://cloud-images.ubuntu.com/releases/18.04/release/" + image_name
+ image_sha256="0fdcba761965735a8a903d8b88df8e47f156f48715c00508e4315c506d7d3cb1"
+ BUILD_SCRIPT = """
+ set -e;
+ cd $(mktemp -d);
+ sudo chmod a+r /dev/vdb;
+ tar --checkpoint=.10 -xf /dev/vdb;
+ ./configure {configure_opts};
+ make --output-sync {target} -j{jobs} {verbose};
+ """
+ def boot(self, img, extra_args=None):
+ aarch64vm.create_flash_images(self._tmpdir, self._efi_aarch64)
+ default_args = aarch64vm.get_pflash_args(self._tmpdir)
+ if extra_args:
+ extra_args.extend(default_args)
+ else:
+ extra_args = default_args
+ # We always add these performance tweaks
+ # because without them, we boot so slowly that we
+ # can time out finding the boot efi device.
+ if '-smp' not in extra_args and \
+ '-smp' not in self._config['extra_args'] and \
+ '-smp' not in self._args:
+ # Only add if not already there to give caller option to change it.
+ extra_args.extend(["-smp", "8"])
+
+ # We have overridden boot() since aarch64 has additional parameters.
+ # Call down to the base class method.
+ super(UbuntuAarch64VM, self).boot(img, extra_args=extra_args)
+
+if __name__ == "__main__":
+ defaults = aarch64vm.get_config_defaults(UbuntuAarch64VM, DEFAULT_CONFIG)
+ sys.exit(basevm.main(UbuntuAarch64VM, defaults))
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 08/30] tests/vm: Added a new script for centos.aarch64.
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (6 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 07/30] tests/vm: Added a new script for ubuntu.aarch64 Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-26 18:13 ` [PATCH v3 09/30] tests/vm: change scripts to use self._config Alex Bennée
` (22 subsequent siblings)
30 siblings, 0 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, berrange, Robert Foley, Alex Bennée, richard.henderson,
f4bug, Philippe Mathieu-Daudé,
cota, Peter Puhov, aurelien
From: Robert Foley <robert.foley@linaro.org>
centos.aarch64 creates a CentOS 8 image.
Also added a new kickstart script used to build the centos.aarch64 image.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-7-robert.foley@linaro.org>
---
tests/vm/Makefile.include | 3 +-
tests/vm/centos-8-aarch64.ks | 51 ++++++++
tests/vm/centos.aarch64 | 227 +++++++++++++++++++++++++++++++++++
3 files changed, 280 insertions(+), 1 deletion(-)
create mode 100644 tests/vm/centos-8-aarch64.ks
create mode 100755 tests/vm/centos.aarch64
diff --git a/tests/vm/Makefile.include b/tests/vm/Makefile.include
index 4fa292765d5..39f918a430a 100644
--- a/tests/vm/Makefile.include
+++ b/tests/vm/Makefile.include
@@ -6,7 +6,7 @@ IMAGES := freebsd netbsd openbsd centos fedora
ifneq ($(GENISOIMAGE),)
IMAGES += ubuntu.i386 centos
ifneq ($(EFI_AARCH64),)
-IMAGES += ubuntu.aarch64
+IMAGES += ubuntu.aarch64 centos.aarch64
endif
endif
@@ -28,6 +28,7 @@ ifneq ($(GENISOIMAGE),)
@echo " vm-build-ubuntu.i386 - Build QEMU in ubuntu i386 VM"
ifneq ($(EFI_AARCH64),)
@echo " vm-build-ubuntu.aarch64 - Build QEMU in ubuntu aarch64 VM"
+ @echo " vm-build-centos.aarch64 - Build QEMU in CentOS aarch64 VM"
else
@echo " (to build centos/ubuntu aarch64 images use configure --efi-aarch64)"
endif
diff --git a/tests/vm/centos-8-aarch64.ks b/tests/vm/centos-8-aarch64.ks
new file mode 100644
index 00000000000..fd6ebe4d49e
--- /dev/null
+++ b/tests/vm/centos-8-aarch64.ks
@@ -0,0 +1,51 @@
+# CentOS aarch64 image kickstart file.
+# This file is used by the CentOS installer to
+# script the generation of the image.
+#
+# Copyright 2020 Linaro
+#
+ignoredisk --only-use=vda
+# System bootloader configuration
+bootloader --append=" crashkernel=auto" --location=mbr --boot-drive=vda
+autopart --type=plain
+# Partition clearing information
+clearpart --linux --initlabel --drives=vda
+# Use text mode install
+text
+repo --name="AppStream" --baseurl=file:///run/install/repo/AppStream
+# Use CDROM installation media
+cdrom
+# Keyboard layouts
+keyboard --vckeymap=us --xlayouts=''
+# System language
+lang en_US.UTF-8
+
+# Network information
+network --bootproto=dhcp --device=enp0s1 --onboot=off --ipv6=auto --no-activate
+network --hostname=localhost.localdomain
+# Run the Setup Agent on first boot
+firstboot --enable
+# Do not configure the X Window System
+skipx
+# System services
+services --enabled="chronyd"
+# System timezone
+timezone America/New_York --isUtc
+
+# Shutdown after installation is complete.
+shutdown
+
+%packages
+@^server-product-environment
+kexec-tools
+
+%end
+
+%addon com_redhat_kdump --enable --reserve-mb='auto'
+
+%end
+%anaconda
+pwpolicy root --minlen=6 --minquality=1 --notstrict --nochanges --notempty
+pwpolicy user --minlen=6 --minquality=1 --notstrict --nochanges --emptyok
+pwpolicy luks --minlen=6 --minquality=1 --notstrict --nochanges --notempty
+%end
diff --git a/tests/vm/centos.aarch64 b/tests/vm/centos.aarch64
new file mode 100755
index 00000000000..d5232ecdb8c
--- /dev/null
+++ b/tests/vm/centos.aarch64
@@ -0,0 +1,227 @@
+#!/usr/bin/env python3
+#
+# Centos aarch64 image
+#
+# Copyright 2020 Linaro
+#
+# Authors:
+# Robert Foley <robert.foley@linaro.org>
+# Originally based on ubuntu.aarch64
+#
+# This code is licensed under the GPL version 2 or later. See
+# the COPYING file in the top-level directory.
+#
+
+import os
+import sys
+import subprocess
+import basevm
+import time
+import traceback
+import aarch64vm
+
+DEFAULT_CONFIG = {
+ 'cpu' : "max",
+ 'machine' : "virt,gic-version=max",
+ 'install_cmds' : "yum install -y make git python3 gcc gcc-c++ flex bison, "\
+ "yum install -y glib2-devel pixman-devel zlib-devel, "\
+ "yum install -y perl-Test-Harness, "\
+ "alternatives --set python /usr/bin/python3, "\
+ "sudo dnf config-manager "\
+ "--add-repo=https://download.docker.com/linux/centos/docker-ce.repo,"\
+ "sudo dnf install --nobest -y docker-ce.aarch64,"\
+ "systemctl enable docker",
+ # We increase beyond the default time since during boot
+ # it can take some time (many seconds) to log into the VM.
+ 'ssh_timeout' : 60,
+}
+
+class CentosAarch64VM(basevm.BaseVM):
+ name = "centos.aarch64"
+ arch = "aarch64"
+ login_prompt = "localhost login:"
+ prompt = '[root@localhost ~]#'
+ image_name = "CentOS-8-aarch64-1905-dvd1.iso"
+ image_link = "http://mirrors.usc.edu/pub/linux/distributions/centos/8.0.1905/isos/aarch64/"
+ image_link += image_name
+ BUILD_SCRIPT = """
+ set -e;
+ cd $(mktemp -d);
+ sudo chmod a+r /dev/vdb;
+ tar --checkpoint=.10 -xf /dev/vdb;
+ ./configure {configure_opts};
+ make --output-sync {target} -j{jobs} {verbose};
+ """
+ def set_key_perm(self):
+ """Set permissions properly on certain files to allow
+ ssh access."""
+ self.console_wait_send(self.prompt,
+ "/usr/sbin/restorecon -R -v /root/.ssh\n")
+ self.console_wait_send(self.prompt,
+ "/usr/sbin/restorecon -R -v "\
+ "/home/{}/.ssh\n".format(self._config["guest_user"]))
+
+ def create_kickstart(self):
+ """Generate the kickstart file used to generate the centos image."""
+ # Start with the template for the kickstart.
+ ks_file = "../tests/vm/centos-8-aarch64.ks"
+ subprocess.check_call("cp {} ./ks.cfg".format(ks_file), shell=True)
+ # Append the ssh keys to the kickstart file
+ # as the post processing phase of installation.
+ with open("ks.cfg", "a") as f:
+ # Add in the root pw and guest user.
+ rootpw = "rootpw --plaintext {}\n"
+ f.write(rootpw.format(self._config["root_pass"]))
+ add_user = "user --groups=wheel --name={} "\
+ "--password={} --plaintext\n"
+ f.write(add_user.format(self._config["guest_user"],
+ self._config["guest_pass"]))
+ # Add the ssh keys.
+ f.write("%post --log=/root/ks-post.log\n")
+ f.write("mkdir -p /root/.ssh\n")
+ addkey = 'echo "{}" >> /root/.ssh/authorized_keys\n'
+ addkey_cmd = addkey.format(self._config["ssh_pub_key"])
+ f.write(addkey_cmd)
+ f.write('mkdir -p /home/{}/.ssh\n'.format(self._config["guest_user"]))
+ addkey = 'echo "{}" >> /home/{}/.ssh/authorized_keys\n'
+ addkey_cmd = addkey.format(self._config["ssh_pub_key"],
+ self._config["guest_user"])
+ f.write(addkey_cmd)
+ f.write("%end\n")
+ # Take our kickstart file and create an .iso from it.
+ # The .iso will be provided to qemu as we boot
+ # from the install dvd.
+ # Anaconda will recognize the label "OEMDRV" and will
+ # start the automated installation.
+ gen_iso_img = 'genisoimage -output ks.iso -volid "OEMDRV" ks.cfg'
+ subprocess.check_call(gen_iso_img, shell=True)
+
+ def wait_for_shutdown(self):
+ """We wait for qemu to shutdown the VM and exit.
+ While this happens we display the console view
+ for easier debugging."""
+ # The image creation is essentially done,
+ # so whether or not the wait is successful we want to
+ # wait for qemu to exit (the self.wait()) before we return.
+ try:
+ self.console_wait("reboot: Power down")
+ except Exception as e:
+ sys.stderr.write("Exception hit\n")
+ if isinstance(e, SystemExit) and e.code == 0:
+ return 0
+ traceback.print_exc()
+ finally:
+ self.wait()
+
+ def build_base_image(self, dest_img):
+ """Run through the centos installer to create
+ a base image with name dest_img."""
+ # We create the temp image, and only rename
+ # to destination when we are done.
+ img = dest_img + ".tmp"
+ # Create an empty image.
+ # We will provide this as the install destination.
+ qemu_img_create = "qemu-img create {} 50G".format(img)
+ subprocess.check_call(qemu_img_create, shell=True)
+
+ # Create our kickstart file to be fed to the installer.
+ self.create_kickstart()
+ # Boot the install dvd with the params as our ks.iso
+ os_img = self._download_with_cache(self.image_link)
+ dvd_iso = "centos-8-dvd.iso"
+ subprocess.check_call(["cp", "-f", os_img, dvd_iso])
+ extra_args = "-cdrom ks.iso"
+ extra_args += " -drive file={},if=none,id=drive1,cache=writeback"
+ extra_args += " -device virtio-blk,drive=drive1,bootindex=1"
+ extra_args = extra_args.format(dvd_iso).split(" ")
+ self.boot(img, extra_args=extra_args)
+ self.console_wait_send("change the selection", "\n")
+ # We seem to need to hit esc (chr(27)) twice to abort the
+ # media check, which takes a long time.
+ # Waiting a bit seems to be more reliable before hitting esc.
+ self.console_wait("Checking")
+ time.sleep(5)
+ self.console_wait_send("Checking", chr(27))
+ time.sleep(5)
+ self.console_wait_send("Checking", chr(27))
+ print("Found Checking")
+ # Give sufficient time for the installer to create the image.
+ self.console_init(timeout=7200)
+ self.wait_for_shutdown()
+ os.rename(img, dest_img)
+ print("Done with base image build: {}".format(dest_img))
+
+ def check_create_base_img(self, img_base, img_dest):
+ """Create a base image using the installer.
+ We will use the base image if it exists.
+ This helps cut down on install time in case we
+ need to restart image creation,
+ since the base image creation can take a long time."""
+ if not os.path.exists(img_base):
+ print("Generate new base image: {}".format(img_base))
+ self.build_base_image(img_base);
+ else:
+ print("Use existing base image: {}".format(img_base))
+ # Save a copy of the base image and copy it to dest.
+ # which we will use going forward.
+ subprocess.check_call(["cp", img_base, img_dest])
+
+ def boot(self, img, extra_args=None):
+ aarch64vm.create_flash_images(self._tmpdir, self._efi_aarch64)
+ default_args = aarch64vm.get_pflash_args(self._tmpdir)
+ if extra_args:
+ extra_args.extend(default_args)
+ else:
+ extra_args = default_args
+ # We always add these performance tweaks
+ # because without them, we boot so slowly that we
+ # can time out finding the boot efi device.
+ if '-smp' not in extra_args and \
+ '-smp' not in self._config['extra_args'] and \
+ '-smp' not in self._args:
+ # Only add if not already there to give caller option to change it.
+ extra_args.extend(["-smp", "8"])
+ # We have overridden boot() since aarch64 has additional parameters.
+ # Call down to the base class method.
+ super(CentosAarch64VM, self).boot(img, extra_args=extra_args)
+
+ def build_image(self, img):
+ img_tmp = img + ".tmp"
+ self.check_create_base_img(img + ".base", img_tmp)
+
+ # Boot the new image for the first time to finish installation.
+ self.boot(img_tmp)
+ self.console_init()
+ self.console_wait_send(self.login_prompt, "root\n")
+ self.console_wait_send("Password:",
+ "{}\n".format(self._config["root_pass"]))
+
+ self.set_key_perm()
+ self.console_wait_send(self.prompt, "rpm -q centos-release\n")
+ enable_adapter = "sed -i 's/ONBOOT=no/ONBOOT=yes/g'" \
+ " /etc/sysconfig/network-scripts/ifcfg-enp0s1\n"
+ self.console_wait_send(self.prompt, enable_adapter)
+ self.console_wait_send(self.prompt, "ifup enp0s1\n")
+ self.console_wait_send(self.prompt,
+ 'echo "qemu ALL=(ALL) NOPASSWD:ALL" | '\
+ 'sudo tee /etc/sudoers.d/qemu\n')
+ self.console_wait(self.prompt)
+
+ # Rest of the commands we issue through ssh.
+ self.wait_ssh(wait_root=True)
+
+ # If the user chooses *not* to do the second phase,
+ # then we will jump right to the graceful shutdown
+ if self._config['install_cmds'] != "":
+ install_cmds = self._config['install_cmds'].split(',')
+ for cmd in install_cmds:
+ self.ssh_root(cmd)
+ self.ssh_root("poweroff")
+ self.wait_for_shutdown()
+ os.rename(img_tmp, img)
+ print("image creation complete: {}".format(img))
+ return 0
+
+if __name__ == "__main__":
+ defaults = aarch64vm.get_config_defaults(CentosAarch64VM, DEFAULT_CONFIG)
+ sys.exit(basevm.main(CentosAarch64VM, defaults))
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 09/30] tests/vm: change scripts to use self._config
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (7 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 08/30] tests/vm: Added a new script for centos.aarch64 Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-29 10:06 ` Philippe Mathieu-Daudé
2020-06-26 18:13 ` [PATCH v3 10/30] python/qemu: Add ConsoleSocket for optional use in QEMUMachine Alex Bennée
` (21 subsequent siblings)
30 siblings, 1 reply; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, berrange, Robert Foley, Alex Bennée, richard.henderson,
f4bug, Philippe Mathieu-Daudé,
cota, Peter Puhov, aurelien
From: Robert Foley <robert.foley@linaro.org>
This change converts existing scripts to using for example self.ROOT_PASS,
to self._config['root_pass'].
We made similar changes for GUEST_USER, and GUEST_PASS.
This allows us also to remove the change in basevm.py,
which adds __getattr__ for backwards compatibility.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-8-robert.foley@linaro.org>
---
tests/vm/basevm.py | 11 ++---------
tests/vm/fedora | 17 +++++++++--------
tests/vm/freebsd | 16 ++++++++--------
tests/vm/netbsd | 19 ++++++++++---------
tests/vm/openbsd | 17 +++++++++--------
5 files changed, 38 insertions(+), 42 deletions(-)
diff --git a/tests/vm/basevm.py b/tests/vm/basevm.py
index 5fd66f6b26a..f716798b405 100644
--- a/tests/vm/basevm.py
+++ b/tests/vm/basevm.py
@@ -183,13 +183,6 @@ class BaseVM(object):
self.console_init(timeout=timeout)
self.console_wait(wait_string)
- def __getattr__(self, name):
- # Support direct access to config by key.
- # for example, access self._config['cpu'] by self.cpu
- if name.lower() in self._config.keys():
- return self._config[name.lower()]
- return object.__getattribute__(self, name)
-
def _download_with_cache(self, url, sha256sum=None, sha512sum=None):
def check_sha256sum(fname):
if not sha256sum:
@@ -239,13 +232,13 @@ class BaseVM(object):
return r
def ssh(self, *cmd):
- return self._ssh_do(self.GUEST_USER, cmd, False)
+ return self._ssh_do(self._config["guest_user"], cmd, False)
def ssh_root(self, *cmd):
return self._ssh_do("root", cmd, False)
def ssh_check(self, *cmd):
- self._ssh_do(self.GUEST_USER, cmd, True)
+ self._ssh_do(self._config["guest_user"], cmd, True)
def ssh_root_check(self, *cmd):
self._ssh_do("root", cmd, True)
diff --git a/tests/vm/fedora b/tests/vm/fedora
index a9195670f4b..b2b478fdbca 100755
--- a/tests/vm/fedora
+++ b/tests/vm/fedora
@@ -108,20 +108,20 @@ class FedoraVM(basevm.BaseVM):
self.console_wait_send("7) [!] Root password", "7\n")
self.console_wait("Password:")
- self.console_send("%s\n" % self.ROOT_PASS)
+ self.console_send("%s\n" % self._config["root_pass"])
self.console_wait("Password (confirm):")
- self.console_send("%s\n" % self.ROOT_PASS)
+ self.console_send("%s\n" % self._config["root_pass"])
self.console_wait_send("8) [ ] User creation", "8\n")
self.console_wait_send("1) [ ] Create user", "1\n")
self.console_wait_send("3) User name", "3\n")
- self.console_wait_send("ENTER:", "%s\n" % self.GUEST_USER)
+ self.console_wait_send("ENTER:", "%s\n" % self._config["guest_user"])
self.console_wait_send("4) [ ] Use password", "4\n")
self.console_wait_send("5) Password", "5\n")
self.console_wait("Password:")
- self.console_send("%s\n" % self.GUEST_PASS)
+ self.console_send("%s\n" % self._config["guest_pass"])
self.console_wait("Password (confirm):")
- self.console_send("%s\n" % self.GUEST_PASS)
+ self.console_send("%s\n" % self._config["guest_pass"])
self.console_wait_send("7) Groups", "c\n")
while True:
@@ -139,7 +139,7 @@ class FedoraVM(basevm.BaseVM):
if good:
break
time.sleep(10)
- self.console_send("r\n" % self.GUEST_PASS)
+ self.console_send("r\n" % self._config["guest_pass"])
self.console_wait_send("'b' to begin install", "b\n")
@@ -150,12 +150,13 @@ class FedoraVM(basevm.BaseVM):
# setup qemu user
prompt = " ~]$"
- self.console_ssh_init(prompt, self.GUEST_USER, self.GUEST_PASS)
+ self.console_ssh_init(prompt, self._config["guest_user"],
+ self._config["guest_pass"])
self.console_wait_send(prompt, "exit\n")
# setup root user
prompt = " ~]#"
- self.console_ssh_init(prompt, "root", self.ROOT_PASS)
+ self.console_ssh_init(prompt, "root", self._config["root_pass"])
self.console_sshd_config(prompt)
# setup virtio-blk #1 (tarfile)
diff --git a/tests/vm/freebsd b/tests/vm/freebsd
index f87db2b126e..29252fa4a64 100755
--- a/tests/vm/freebsd
+++ b/tests/vm/freebsd
@@ -113,9 +113,9 @@ class FreeBSDVM(basevm.BaseVM):
# post-install configuration
self.console_wait("New Password:")
- self.console_send("%s\n" % self.ROOT_PASS)
+ self.console_send("%s\n" % self._config["root_pass"])
self.console_wait("Retype New Password:")
- self.console_send("%s\n" % self.ROOT_PASS)
+ self.console_send("%s\n" % self._config["root_pass"])
self.console_wait_send("Network Configuration", "\n")
self.console_wait_send("IPv4", "y")
@@ -134,9 +134,9 @@ class FreeBSDVM(basevm.BaseVM):
# qemu user
self.console_wait_send("Add User Accounts", "y")
self.console_wait("Username")
- self.console_send("%s\n" % self.GUEST_USER)
+ self.console_send("%s\n" % self._config["guest_user"])
self.console_wait("Full name")
- self.console_send("%s\n" % self.GUEST_USER)
+ self.console_send("%s\n" % self._config["guest_user"])
self.console_wait_send("Uid", "\n")
self.console_wait_send("Login group", "\n")
self.console_wait_send("Login group", "\n")
@@ -148,9 +148,9 @@ class FreeBSDVM(basevm.BaseVM):
self.console_wait_send("Use an empty password", "\n")
self.console_wait_send("Use a random password", "\n")
self.console_wait("Enter password:")
- self.console_send("%s\n" % self.GUEST_PASS)
+ self.console_send("%s\n" % self._config["guest_pass"])
self.console_wait("Enter password again:")
- self.console_send("%s\n" % self.GUEST_PASS)
+ self.console_send("%s\n" % self._config["guest_pass"])
self.console_wait_send("Lock out", "\n")
self.console_wait_send("OK", "yes\n")
self.console_wait_send("Add another user", "no\n")
@@ -164,12 +164,12 @@ class FreeBSDVM(basevm.BaseVM):
# setup qemu user
prompt = "$"
- self.console_ssh_init(prompt, self.GUEST_USER, self.GUEST_PASS)
+ self.console_ssh_init(prompt, self._config["guest_user"], self._config["guest_pass"])
self.console_wait_send(prompt, "exit\n")
# setup root user
prompt = "root@freebsd:~ #"
- self.console_ssh_init(prompt, "root", self.ROOT_PASS)
+ self.console_ssh_init(prompt, "root", self._config["root_pass"])
self.console_sshd_config(prompt)
# setup serial console
diff --git a/tests/vm/netbsd b/tests/vm/netbsd
index cdac502dad8..dc0e45c1d45 100755
--- a/tests/vm/netbsd
+++ b/tests/vm/netbsd
@@ -120,24 +120,24 @@ class NetBSDVM(basevm.BaseVM):
self.console_wait_send("d: Change root password", "d\n")
self.console_wait_send("a: Yes", "a\n")
self.console_wait("New password:")
- self.console_send("%s\n" % self.ROOT_PASS)
+ self.console_send("%s\n" % self._config["root_pass"])
self.console_wait("New password:")
- self.console_send("%s\n" % self.ROOT_PASS)
+ self.console_send("%s\n" % self._config["root_pass"])
self.console_wait("Retype new password:")
- self.console_send("%s\n" % self.ROOT_PASS)
+ self.console_send("%s\n" % self._config["root_pass"])
self.console_wait_send("o: Add a user", "o\n")
self.console_wait("username")
- self.console_send("%s\n" % self.GUEST_USER)
+ self.console_send("%s\n" % self._config["guest_pass"])
self.console_wait("to group wheel")
self.console_wait_send("a: Yes", "a\n")
self.console_wait_send("a: /bin/sh", "a\n")
self.console_wait("New password:")
- self.console_send("%s\n" % self.GUEST_PASS)
+ self.console_send("%s\n" % self._config["guest_pass"])
self.console_wait("New password:")
- self.console_send("%s\n" % self.GUEST_PASS)
+ self.console_send("%s\n" % self._config["guest_pass"])
self.console_wait("Retype new password:")
- self.console_send("%s\n" % self.GUEST_PASS)
+ self.console_send("%s\n" % self._config["guest_pass"])
self.console_wait_send("a: Configure network", "a\n")
self.console_wait_send("a: vioif0", "a\n")
@@ -170,12 +170,13 @@ class NetBSDVM(basevm.BaseVM):
# setup qemu user
prompt = "localhost$"
- self.console_ssh_init(prompt, self.GUEST_USER, self.GUEST_PASS)
+ self.console_ssh_init(prompt, self._config["guest_user"],
+ self._config["guest_pass"])
self.console_wait_send(prompt, "exit\n")
# setup root user
prompt = "localhost#"
- self.console_ssh_init(prompt, "root", self.ROOT_PASS)
+ self.console_ssh_init(prompt, "root", self._config["root_pass"])
self.console_sshd_config(prompt)
# setup virtio-blk #1 (tarfile)
diff --git a/tests/vm/openbsd b/tests/vm/openbsd
index 13e7f9a6d56..dfe633e4532 100755
--- a/tests/vm/openbsd
+++ b/tests/vm/openbsd
@@ -98,9 +98,9 @@ class OpenBSDVM(basevm.BaseVM):
self.console_wait_send("Which network interface", "done\n")
self.console_wait_send("DNS domain name", "localnet\n")
self.console_wait("Password for root account")
- self.console_send("%s\n" % self.ROOT_PASS)
+ self.console_send("%s\n" % self._config["root_pass"])
self.console_wait("Password for root account")
- self.console_send("%s\n" % self.ROOT_PASS)
+ self.console_send("%s\n" % self._config["root_pass"])
self.console_wait_send("Start sshd(8)", "yes\n")
self.console_wait_send("X Window System", "\n")
self.console_wait_send("xenodm", "\n")
@@ -108,13 +108,13 @@ class OpenBSDVM(basevm.BaseVM):
self.console_wait_send("Which speed", "\n")
self.console_wait("Setup a user")
- self.console_send("%s\n" % self.GUEST_USER)
+ self.console_send("%s\n" % self._config["guest_user"])
self.console_wait("Full name")
- self.console_send("%s\n" % self.GUEST_USER)
+ self.console_send("%s\n" % self._config["guest_user"])
self.console_wait("Password")
- self.console_send("%s\n" % self.GUEST_PASS)
+ self.console_send("%s\n" % self._config["guest_pass"])
self.console_wait("Password")
- self.console_send("%s\n" % self.GUEST_PASS)
+ self.console_send("%s\n" % self._config["guest_pass"])
self.console_wait_send("Allow root ssh login", "yes\n")
self.console_wait_send("timezone", "UTC\n")
@@ -135,12 +135,13 @@ class OpenBSDVM(basevm.BaseVM):
# setup qemu user
prompt = "$"
- self.console_ssh_init(prompt, self.GUEST_USER, self.GUEST_PASS)
+ self.console_ssh_init(prompt, self._config["guest_user"],
+ self._config["guest_pass"])
self.console_wait_send(prompt, "exit\n")
# setup root user
prompt = "openbsd#"
- self.console_ssh_init(prompt, "root", self.ROOT_PASS)
+ self.console_ssh_init(prompt, "root", self._config["root_pass"])
self.console_sshd_config(prompt)
# setup virtio-blk #1 (tarfile)
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 10/30] python/qemu: Add ConsoleSocket for optional use in QEMUMachine
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (8 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 09/30] tests/vm: change scripts to use self._config Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-26 18:13 ` [PATCH v3 11/30] tests/vm: Add workaround to consume console Alex Bennée
` (20 subsequent siblings)
30 siblings, 0 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, berrange, Robert Foley, Alex Bennée, richard.henderson,
f4bug, Philippe Mathieu-Daudé,
cota, Cleber Rosa, Peter Puhov, aurelien, Eduardo Habkost
From: Robert Foley <robert.foley@linaro.org>
We add the ConsoleSocket object, which has a socket interface
and which will consume all arriving characters on the
socket, placing them into an in memory buffer.
This will also provide those chars via recv() as
would a regular socket.
ConsoleSocket also has the option of dumping
the console bytes to a log file.
We also give QEMUMachine the option of using ConsoleSocket
to drain and to use for logging console to a file.
By default QEMUMachine does not use ConsoleSocket.
This is added in preparation for use by basevm.py in a later commit.
This is a workaround we found was needed for basevm.py since
there is a known issue where QEMU will hang waiting
for console characters to be consumed.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-9-robert.foley@linaro.org>
---
python/qemu/console_socket.py | 110 ++++++++++++++++++++++++++++++++++
python/qemu/machine.py | 23 +++++--
2 files changed, 129 insertions(+), 4 deletions(-)
create mode 100644 python/qemu/console_socket.py
diff --git a/python/qemu/console_socket.py b/python/qemu/console_socket.py
new file mode 100644
index 00000000000..830cb7c6282
--- /dev/null
+++ b/python/qemu/console_socket.py
@@ -0,0 +1,110 @@
+#!/usr/bin/env python3
+#
+# This python module implements a ConsoleSocket object which is
+# designed always drain the socket itself, and place
+# the bytes into a in memory buffer for later processing.
+#
+# Optionally a file path can be passed in and we will also
+# dump the characters to this file for debug.
+#
+# Copyright 2020 Linaro
+#
+# Authors:
+# Robert Foley <robert.foley@linaro.org>
+#
+# This code is licensed under the GPL version 2 or later. See
+# the COPYING file in the top-level directory.
+#
+import asyncore
+import socket
+import threading
+import io
+import os
+import sys
+from collections import deque
+import time
+import traceback
+
+class ConsoleSocket(asyncore.dispatcher):
+
+ def __init__(self, address, file=None):
+ self._recv_timeout_sec = 300
+ self._buffer = deque()
+ self._asyncore_thread = None
+ self._sock = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
+ self._sock.connect(address)
+ self._logfile = None
+ if file:
+ self._logfile = open(file, "w")
+ asyncore.dispatcher.__init__(self, sock=self._sock)
+ self._open = True
+ self._thread_start()
+
+ def _thread_start(self):
+ """Kick off a thread to wait on the asyncore.loop"""
+ if self._asyncore_thread is not None:
+ return
+ self._asyncore_thread = threading.Thread(target=asyncore.loop,
+ kwargs={'timeout':1})
+ self._asyncore_thread.daemon = True
+ self._asyncore_thread.start()
+
+ def handle_close(self):
+ """redirect close to base class"""
+ # Call the base class close, but not self.close() since
+ # handle_close() occurs in the context of the thread which
+ # self.close() attempts to join.
+ asyncore.dispatcher.close(self)
+
+ def close(self):
+ """Close the base object and wait for the thread to terminate"""
+ if self._open:
+ self._open = False
+ asyncore.dispatcher.close(self)
+ if self._asyncore_thread is not None:
+ thread, self._asyncore_thread = self._asyncore_thread, None
+ thread.join()
+ if self._logfile:
+ self._logfile.close()
+ self._logfile = None
+
+ def handle_read(self):
+ """process arriving characters into in memory _buffer"""
+ try:
+ data = asyncore.dispatcher.recv(self, 1)
+ # latin1 is needed since there are some chars
+ # we are receiving that cannot be encoded to utf-8
+ # such as 0xe2, 0x80, 0xA6.
+ string = data.decode("latin1")
+ except:
+ print("Exception seen.")
+ traceback.print_exc()
+ return
+ if self._logfile:
+ self._logfile.write("{}".format(string))
+ self._logfile.flush()
+ for c in string:
+ self._buffer.extend(c)
+
+ def recv(self, n=1, sleep_delay_s=0.1):
+ """Return chars from in memory buffer"""
+ start_time = time.time()
+ while len(self._buffer) < n:
+ time.sleep(sleep_delay_s)
+ elapsed_sec = time.time() - start_time
+ if elapsed_sec > self._recv_timeout_sec:
+ raise socket.timeout
+ chars = ''.join([self._buffer.popleft() for i in range(n)])
+ # We choose to use latin1 to remain consistent with
+ # handle_read() and give back the same data as the user would
+ # receive if they were reading directly from the
+ # socket w/o our intervention.
+ return chars.encode("latin1")
+
+ def set_blocking(self):
+ """Maintain compatibility with socket API"""
+ pass
+
+ def settimeout(self, seconds):
+ """Set current timeout on recv"""
+ self._recv_timeout_sec = seconds
diff --git a/python/qemu/machine.py b/python/qemu/machine.py
index 041c615052e..c25f0b42cf6 100644
--- a/python/qemu/machine.py
+++ b/python/qemu/machine.py
@@ -26,6 +26,7 @@ import socket
import tempfile
from typing import Optional, Type
from types import TracebackType
+from qemu.console_socket import ConsoleSocket
from . import qmp
@@ -75,7 +76,8 @@ class QEMUMachine:
def __init__(self, binary, args=None, wrapper=None, name=None,
test_dir="/var/tmp", monitor_address=None,
- socket_scm_helper=None, sock_dir=None):
+ socket_scm_helper=None, sock_dir=None,
+ drain_console=False, console_log=None):
'''
Initialize a QEMUMachine
@@ -86,6 +88,9 @@ class QEMUMachine:
@param test_dir: where to create socket and log file
@param monitor_address: address for QMP monitor
@param socket_scm_helper: helper program, required for send_fd_scm()
+ @param sock_dir: where to create socket (overrides test_dir for sock)
+ @param console_log: (optional) path to console log file
+ @param drain_console: (optional) True to drain console socket to buffer
@note: Qemu process is not started until launch() is used.
'''
if args is None:
@@ -122,6 +127,12 @@ class QEMUMachine:
self._console_address = None
self._console_socket = None
self._remove_files = []
+ self._console_log_path = console_log
+ if self._console_log_path:
+ # In order to log the console, buffering needs to be enabled.
+ self._drain_console = True
+ else:
+ self._drain_console = drain_console
def __enter__(self):
return self
@@ -580,7 +591,11 @@ class QEMUMachine:
Returns a socket connected to the console
"""
if self._console_socket is None:
- self._console_socket = socket.socket(socket.AF_UNIX,
- socket.SOCK_STREAM)
- self._console_socket.connect(self._console_address)
+ if self._drain_console:
+ self._console_socket = ConsoleSocket(self._console_address,
+ file=self._console_log_path)
+ else:
+ self._console_socket = socket.socket(socket.AF_UNIX,
+ socket.SOCK_STREAM)
+ self._console_socket.connect(self._console_address)
return self._console_socket
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 11/30] tests/vm: Add workaround to consume console
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (9 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 10/30] python/qemu: Add ConsoleSocket for optional use in QEMUMachine Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-26 18:13 ` [PATCH v3 12/30] tests/vm: switch from optsparse to argparse Alex Bennée
` (19 subsequent siblings)
30 siblings, 0 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, berrange, Robert Foley, Alex Bennée, richard.henderson,
f4bug, Philippe Mathieu-Daudé,
cota, Peter Puhov, aurelien
From: Robert Foley <robert.foley@linaro.org>
This adds support to basevm.py so that we always
drain the console chars. This makes use of
support added in an earlier commit that allows
QEMUMachine to use the ConsoleSocket.
This is a workaround we found was needed since
there is a known issue where QEMU will hang waiting
for console characters to be consumed.
We also added the option of logging the console to a file.
LOG_CONSOLE=1 will now log the output to a file.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200601211421.1277-10-robert.foley@linaro.org>
---
tests/vm/Makefile.include | 4 ++++
tests/vm/basevm.py | 21 +++++++++++++++++++--
2 files changed, 23 insertions(+), 2 deletions(-)
diff --git a/tests/vm/Makefile.include b/tests/vm/Makefile.include
index 39f918a430a..f21948c46a5 100644
--- a/tests/vm/Makefile.include
+++ b/tests/vm/Makefile.include
@@ -49,6 +49,7 @@ endif
@echo ' EXTRA_CONFIGURE_OPTS="..."'
@echo " J=[0..9]* - Override the -jN parameter for make commands"
@echo " DEBUG=1 - Enable verbose output on host and interactive debugging"
+ @echo " LOG_CONSOLE=1 - Log console to file in: ~/.cache/qemu-vm "
@echo " V=1 - Enable verbose ouput on host and guest commands"
@echo " QEMU_LOCAL=1 - Use QEMU binary local to this build."
@echo " QEMU=/path/to/qemu - Change path to QEMU binary"
@@ -75,6 +76,7 @@ $(IMAGES_DIR)/%.img: $(SRC_PATH)/tests/vm/% \
$(if $(GENISOIMAGE),--genisoimage $(GENISOIMAGE)) \
$(if $(QEMU_LOCAL),--build-path $(BUILD_DIR)) \
$(if $(EFI_AARCH64),--efi-aarch64 $(EFI_AARCH64)) \
+ $(if $(LOG_CONSOLE),--log-console) \
--image "$@" \
--force \
--build-image $@, \
@@ -91,6 +93,7 @@ vm-build-%: $(IMAGES_DIR)/%.img
$(if $(V),--verbose) \
$(if $(QEMU_LOCAL),--build-path $(BUILD_DIR)) \
$(if $(EFI_AARCH64),--efi-aarch64 $(EFI_AARCH64)) \
+ $(if $(LOG_CONSOLE),--log-console) \
--image "$<" \
$(if $(BUILD_TARGET),--build-target $(BUILD_TARGET)) \
--snapshot \
@@ -114,6 +117,7 @@ vm-boot-ssh-%: $(IMAGES_DIR)/%.img
$(if $(V)$(DEBUG), --debug) \
$(if $(QEMU_LOCAL),--build-path $(BUILD_DIR)) \
$(if $(EFI_AARCH64),--efi-aarch64 $(EFI_AARCH64)) \
+ $(if $(LOG_CONSOLE),--log-console) \
--image "$<" \
--interactive \
false, \
diff --git a/tests/vm/basevm.py b/tests/vm/basevm.py
index f716798b405..04d083409a5 100644
--- a/tests/vm/basevm.py
+++ b/tests/vm/basevm.py
@@ -117,6 +117,11 @@ class BaseVM(object):
"w").write(self._config['ssh_pub_key'])
self.debug = args.debug
+ self._console_log_path = None
+ if args.log_console:
+ self._console_log_path = \
+ os.path.join(os.path.expanduser("~/.cache/qemu-vm"),
+ "{}.install.log".format(self.name))
self._stderr = sys.stderr
self._devnull = open(os.devnull, "w")
if self.debug:
@@ -271,7 +276,13 @@ class BaseVM(object):
args += self._data_args + extra_args + self._config['extra_args']
logging.debug("QEMU args: %s", " ".join(args))
qemu_path = get_qemu_path(self.arch, self._build_path)
- guest = QEMUMachine(binary=qemu_path, args=args)
+
+ # Since console_log_path is only set when the user provides the
+ # log_console option, we will set drain_console=True so the
+ # console is always drained.
+ guest = QEMUMachine(binary=qemu_path, args=args,
+ console_log=self._console_log_path,
+ drain_console=True)
guest.set_machine(self._config['machine'])
guest.set_console()
try:
@@ -285,6 +296,8 @@ class BaseVM(object):
raise
atexit.register(self.shutdown)
self._guest = guest
+ # Init console so we can start consuming the chars.
+ self.console_init()
usernet_info = guest.qmp("human-monitor-command",
command_line="info usernet")
self.ssh_port = None
@@ -296,7 +309,9 @@ class BaseVM(object):
raise Exception("Cannot find ssh port from 'info usernet':\n%s" % \
usernet_info)
- def console_init(self, timeout = 120):
+ def console_init(self, timeout = None):
+ if timeout == None:
+ timeout = self.socket_timeout
vm = self._guest
vm.console_socket.settimeout(timeout)
self.console_raw_path = os.path.join(vm._temp_dir,
@@ -578,6 +593,8 @@ def parse_args(vmcls):
parser.add_option("--efi-aarch64",
default="/usr/share/qemu-efi-aarch64/QEMU_EFI.fd",
help="Path to efi image for aarch64 VMs.")
+ parser.add_option("--log-console", action="store_true",
+ help="Log console to file.")
parser.disable_interspersed_args()
return parser.parse_args()
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 12/30] tests/vm: switch from optsparse to argparse
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (10 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 11/30] tests/vm: Add workaround to consume console Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-26 18:13 ` [PATCH v3 13/30] tests/vm: allow us to take advantage of MTTCG Alex Bennée
` (18 subsequent siblings)
30 siblings, 0 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, berrange, Robert Foley, Alex Bennée, richard.henderson,
f4bug, Philippe Mathieu-Daudé,
cota, aurelien
optparse has been deprecated since version 3.2 and argparse is the
blessed replacement. Take the opportunity to enhance our help output
showing defaults when called.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
---
v2
- add explicit parser.add_argument("commands", nargs="*")
---
tests/vm/basevm.py | 93 ++++++++++++++++++++++++----------------------
1 file changed, 48 insertions(+), 45 deletions(-)
diff --git a/tests/vm/basevm.py b/tests/vm/basevm.py
index 04d083409a5..890bbc5549a 100644
--- a/tests/vm/basevm.py
+++ b/tests/vm/basevm.py
@@ -23,7 +23,7 @@ from qemu.accel import kvm_available
from qemu.machine import QEMUMachine
import subprocess
import hashlib
-import optparse
+import argparse
import atexit
import tempfile
import shutil
@@ -556,54 +556,57 @@ def parse_args(vmcls):
else:
return 1
- parser = optparse.OptionParser(
- description="VM test utility. Exit codes: "
- "0 = success, "
- "1 = command line error, "
- "2 = environment initialization failed, "
- "3 = test command failed")
- parser.add_option("--debug", "-D", action="store_true",
- help="enable debug output")
- parser.add_option("--image", "-i", default="%s.img" % vmcls.name,
- help="image file name")
- parser.add_option("--force", "-f", action="store_true",
- help="force build image even if image exists")
- parser.add_option("--jobs", type=int, default=get_default_jobs(),
- help="number of virtual CPUs")
- parser.add_option("--verbose", "-V", action="store_true",
- help="Pass V=1 to builds within the guest")
- parser.add_option("--build-image", "-b", action="store_true",
- help="build image")
- parser.add_option("--build-qemu",
- help="build QEMU from source in guest")
- parser.add_option("--build-target",
- help="QEMU build target", default="check")
- parser.add_option("--build-path", default=None,
- help="Path of build directory, "\
- "for using build tree QEMU binary. ")
- parser.add_option("--interactive", "-I", action="store_true",
- help="Interactively run command")
- parser.add_option("--snapshot", "-s", action="store_true",
- help="run tests with a snapshot")
- parser.add_option("--genisoimage", default="genisoimage",
- help="iso imaging tool")
- parser.add_option("--config", "-c", default=None,
- help="Provide config yaml for configuration. "\
- "See config_example.yaml for example.")
- parser.add_option("--efi-aarch64",
- default="/usr/share/qemu-efi-aarch64/QEMU_EFI.fd",
- help="Path to efi image for aarch64 VMs.")
- parser.add_option("--log-console", action="store_true",
- help="Log console to file.")
- parser.disable_interspersed_args()
+ parser = argparse.ArgumentParser(
+ formatter_class=argparse.ArgumentDefaultsHelpFormatter,
+ description="Utility for provisioning VMs and running builds",
+ epilog="""Remaining arguments are passed to the command.
+ Exit codes: 0 = success, 1 = command line error,
+ 2 = environment initialization failed,
+ 3 = test command failed""")
+ parser.add_argument("--debug", "-D", action="store_true",
+ help="enable debug output")
+ parser.add_argument("--image", "-i", default="%s.img" % vmcls.name,
+ help="image file name")
+ parser.add_argument("--force", "-f", action="store_true",
+ help="force build image even if image exists")
+ parser.add_argument("--jobs", type=int, default=get_default_jobs(),
+ help="number of virtual CPUs")
+ parser.add_argument("--verbose", "-V", action="store_true",
+ help="Pass V=1 to builds within the guest")
+ parser.add_argument("--build-image", "-b", action="store_true",
+ help="build image")
+ parser.add_argument("--build-qemu",
+ help="build QEMU from source in guest")
+ parser.add_argument("--build-target",
+ help="QEMU build target", default="check")
+ parser.add_argument("--build-path", default=None,
+ help="Path of build directory, "\
+ "for using build tree QEMU binary. ")
+ parser.add_argument("--interactive", "-I", action="store_true",
+ help="Interactively run command")
+ parser.add_argument("--snapshot", "-s", action="store_true",
+ help="run tests with a snapshot")
+ parser.add_argument("--genisoimage", default="genisoimage",
+ help="iso imaging tool")
+ parser.add_argument("--config", "-c", default=None,
+ help="Provide config yaml for configuration. "\
+ "See config_example.yaml for example.")
+ parser.add_argument("--efi-aarch64",
+ default="/usr/share/qemu-efi-aarch64/QEMU_EFI.fd",
+ help="Path to efi image for aarch64 VMs.")
+ parser.add_argument("--log-console", action="store_true",
+ help="Log console to file.")
+ parser.add_argument("commands", nargs="*", help="""Remaining
+ commands after -- are passed to command inside the VM""")
+
return parser.parse_args()
def main(vmcls, config=None):
try:
if config == None:
config = {}
- args, argv = parse_args(vmcls)
- if not argv and not args.build_qemu and not args.build_image:
+ args = parse_args(vmcls)
+ if not args.commands and not args.build_qemu and not args.build_image:
print("Nothing to do?")
return 1
config = parse_config(config, args)
@@ -619,12 +622,12 @@ def main(vmcls, config=None):
if args.build_qemu:
vm.add_source_dir(args.build_qemu)
cmd = [vm.BUILD_SCRIPT.format(
- configure_opts = " ".join(argv),
+ configure_opts = " ".join(args.commands),
jobs=int(args.jobs),
target=args.build_target,
verbose = "V=1" if args.verbose else "")]
else:
- cmd = argv
+ cmd = args.commands
img = args.image
if args.snapshot:
img += ",snapshot=on"
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 13/30] tests/vm: allow us to take advantage of MTTCG
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (11 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 12/30] tests/vm: switch from optsparse to argparse Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-26 18:13 ` [PATCH v3 14/30] tests/docker: check for an parameters not empty string Alex Bennée
` (17 subsequent siblings)
30 siblings, 0 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, berrange, Robert Foley, Alex Bennée, richard.henderson,
f4bug, Philippe Mathieu-Daudé,
cota, aurelien
We currently limit TCG guests to -smp 1 but now we have added some
aarch64 guests we can do better when running on x86_64 hardware.
Raise the limit for TCG guests when it is safe to do so.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Robert Foley <robert.foley@linaro.org>
---
tests/vm/basevm.py | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/tests/vm/basevm.py b/tests/vm/basevm.py
index 890bbc5549a..b8c60803e2d 100644
--- a/tests/vm/basevm.py
+++ b/tests/vm/basevm.py
@@ -553,6 +553,12 @@ def parse_args(vmcls):
def get_default_jobs():
if kvm_available(vmcls.arch):
return multiprocessing.cpu_count() // 2
+ elif os.uname().machine == "x86_64" and \
+ vmcls.arch in ["aarch64", "x86_64", "i386"]:
+ # MTTCG is available on these arches and we can allow more cores.
+ # But only up to a reasonable limit. User can always override
+ # these limits with --jobs.
+ return min(multiprocessing.cpu_count() // 2, 8)
else:
return 1
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 14/30] tests/docker: check for an parameters not empty string
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (12 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 13/30] tests/vm: allow us to take advantage of MTTCG Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-26 18:13 ` [PATCH v3 15/30] tests/docker: change tag naming scheme of our images Alex Bennée
` (16 subsequent siblings)
30 siblings, 0 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, Peter Maydell, berrange, Alex Bennée,
richard.henderson, f4bug, Philippe Mathieu-Daudé,
cota, aurelien
Reported-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
---
tests/docker/common.rc | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tests/docker/common.rc b/tests/docker/common.rc
index 02cd67a8c5e..b27ce17e333 100755
--- a/tests/docker/common.rc
+++ b/tests/docker/common.rc
@@ -47,7 +47,7 @@ build_qemu()
check_qemu()
{
# default to make check unless the caller specifies
- if test -z "$@"; then
+ if [ $# == 0 ]; then
INVOCATION="check"
else
INVOCATION="$@"
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 15/30] tests/docker: change tag naming scheme of our images
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (13 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 14/30] tests/docker: check for an parameters not empty string Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-29 10:04 ` Philippe Mathieu-Daudé
2020-06-26 18:13 ` [PATCH v3 16/30] .gitignore: un-ignore .gitlab-ci.d Alex Bennée
` (15 subsequent siblings)
30 siblings, 1 reply; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, berrange, Alex Bennée, richard.henderson, f4bug,
Philippe Mathieu-Daudé,
cota, aurelien
We've been misusing the tag naming scheme for some time by overloading
the post : section with the image type. Really it should be saved for
the revision of that particular build. Move the details to the other
side so we have:
qemu/image-name
with the implied :latest version added by the tooling.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
v2
- fix RUN invocation as well
- don't include :latest tag for debian-arm64-cross (implied)
---
tests/docker/Makefile.include | 4 ++--
tests/docker/docker.py | 2 +-
tests/docker/dockerfiles/debian-alpha-cross.docker | 2 +-
tests/docker/dockerfiles/debian-amd64-cross.docker | 2 +-
tests/docker/dockerfiles/debian-amd64.docker | 2 +-
tests/docker/dockerfiles/debian-arm64-cross.docker | 2 +-
tests/docker/dockerfiles/debian-arm64-test-cross.docker | 2 +-
tests/docker/dockerfiles/debian-armel-cross.docker | 2 +-
tests/docker/dockerfiles/debian-armhf-cross.docker | 2 +-
tests/docker/dockerfiles/debian-hppa-cross.docker | 2 +-
tests/docker/dockerfiles/debian-m68k-cross.docker | 2 +-
tests/docker/dockerfiles/debian-mips-cross.docker | 2 +-
tests/docker/dockerfiles/debian-mips64-cross.docker | 2 +-
tests/docker/dockerfiles/debian-mips64el-cross.docker | 2 +-
tests/docker/dockerfiles/debian-mipsel-cross.docker | 2 +-
tests/docker/dockerfiles/debian-powerpc-cross.docker | 2 +-
tests/docker/dockerfiles/debian-ppc64-cross.docker | 2 +-
tests/docker/dockerfiles/debian-ppc64el-cross.docker | 2 +-
tests/docker/dockerfiles/debian-riscv64-cross.docker | 2 +-
tests/docker/dockerfiles/debian-s390x-cross.docker | 2 +-
tests/docker/dockerfiles/debian-sh4-cross.docker | 2 +-
tests/docker/dockerfiles/debian-sparc64-cross.docker | 2 +-
tests/docker/dockerfiles/debian-tricore-cross.docker | 2 +-
tests/docker/dockerfiles/debian-win32-cross.docker | 2 +-
tests/docker/dockerfiles/debian-win64-cross.docker | 2 +-
tests/docker/dockerfiles/debian9-mxe.docker | 2 +-
26 files changed, 27 insertions(+), 27 deletions(-)
diff --git a/tests/docker/Makefile.include b/tests/docker/Makefile.include
index 3e3617816ec..6d6ced1e463 100644
--- a/tests/docker/Makefile.include
+++ b/tests/docker/Makefile.include
@@ -55,7 +55,7 @@ docker-image-%: $(DOCKER_FILES_DIR)/%.docker
else
docker-image-%: $(DOCKER_FILES_DIR)/%.docker
$(call quiet-command,\
- $(DOCKER_SCRIPT) build -t qemu:$* -f $< \
+ $(DOCKER_SCRIPT) build -t qemu/$* -f $< \
$(if $V,,--quiet) $(if $(NOCACHE),--no-cache) \
$(if $(NOUSER),,--add-current-user) \
$(if $(EXTRA_FILES),--extra-files $(EXTRA_FILES))\
@@ -258,7 +258,7 @@ docker-run: docker-qemu-src
docker-run-%: CMD = $(shell echo '$@' | sed -e 's/docker-run-\([^@]*\)@\(.*\)/\1/')
docker-run-%: IMAGE = $(shell echo '$@' | sed -e 's/docker-run-\([^@]*\)@\(.*\)/\2/')
docker-run-%:
- @$(MAKE) docker-run TEST=$(CMD) IMAGE=qemu:$(IMAGE)
+ @$(MAKE) docker-run TEST=$(CMD) IMAGE=qemu/$(IMAGE)
docker-clean:
$(call quiet-command, $(DOCKER_SCRIPT) clean)
diff --git a/tests/docker/docker.py b/tests/docker/docker.py
index e630aae1089..cc6f76caa60 100755
--- a/tests/docker/docker.py
+++ b/tests/docker/docker.py
@@ -204,7 +204,7 @@ def _dockerfile_preprocess(df):
for l in df.splitlines():
if len(l.strip()) == 0 or l.startswith("#"):
continue
- from_pref = "FROM qemu:"
+ from_pref = "FROM qemu/"
if l.startswith(from_pref):
# TODO: Alternatively we could replace this line with "FROM $ID"
# where $ID is the image's hex id obtained with
diff --git a/tests/docker/dockerfiles/debian-alpha-cross.docker b/tests/docker/dockerfiles/debian-alpha-cross.docker
index 74bcabfdb12..10fe30df0dd 100644
--- a/tests/docker/dockerfiles/debian-alpha-cross.docker
+++ b/tests/docker/dockerfiles/debian-alpha-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Buster base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
RUN apt update && \
DEBIAN_FRONTEND=noninteractive eatmydata \
diff --git a/tests/docker/dockerfiles/debian-amd64-cross.docker b/tests/docker/dockerfiles/debian-amd64-cross.docker
index 5d890419251..870109ef6af 100644
--- a/tests/docker/dockerfiles/debian-amd64-cross.docker
+++ b/tests/docker/dockerfiles/debian-amd64-cross.docker
@@ -4,7 +4,7 @@
# This docker target is used on non-x86_64 machines which need the
# x86_64 cross compilers installed.
#
-FROM qemu:debian10
+FROM qemu/debian10
MAINTAINER Alex Bennée <alex.bennee@linaro.org>
# Add the foreign architecture we want and install dependencies
diff --git a/tests/docker/dockerfiles/debian-amd64.docker b/tests/docker/dockerfiles/debian-amd64.docker
index 957f0bc2e79..8fdfd6a6b04 100644
--- a/tests/docker/dockerfiles/debian-amd64.docker
+++ b/tests/docker/dockerfiles/debian-amd64.docker
@@ -4,7 +4,7 @@
# This docker target builds on the debian Stretch base image. Further
# libraries which are not widely available are installed by hand.
#
-FROM qemu:debian10
+FROM qemu/debian10
MAINTAINER Philippe Mathieu-Daudé <f4bug@amsat.org>
RUN apt update && \
diff --git a/tests/docker/dockerfiles/debian-arm64-cross.docker b/tests/docker/dockerfiles/debian-arm64-cross.docker
index 09ca0a1ba79..166e24df138 100644
--- a/tests/docker/dockerfiles/debian-arm64-cross.docker
+++ b/tests/docker/dockerfiles/debian-arm64-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Buster base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
# Add the foreign architecture we want and install dependencies
RUN dpkg --add-architecture arm64
diff --git a/tests/docker/dockerfiles/debian-arm64-test-cross.docker b/tests/docker/dockerfiles/debian-arm64-test-cross.docker
index a44e76d9421..53a9012beb8 100644
--- a/tests/docker/dockerfiles/debian-arm64-test-cross.docker
+++ b/tests/docker/dockerfiles/debian-arm64-test-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Bullseye base image.
#
-FROM qemu:debian11
+FROM qemu/debian11
# Add the foreign architecture we want and install dependencies
RUN dpkg --add-architecture arm64
diff --git a/tests/docker/dockerfiles/debian-armel-cross.docker b/tests/docker/dockerfiles/debian-armel-cross.docker
index e3794a61c95..b7b1a3585f8 100644
--- a/tests/docker/dockerfiles/debian-armel-cross.docker
+++ b/tests/docker/dockerfiles/debian-armel-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Stretch base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
MAINTAINER Philippe Mathieu-Daudé <f4bug@amsat.org>
# Add the foreign architecture we want and install dependencies
diff --git a/tests/docker/dockerfiles/debian-armhf-cross.docker b/tests/docker/dockerfiles/debian-armhf-cross.docker
index e163b8b9569..25d76188337 100644
--- a/tests/docker/dockerfiles/debian-armhf-cross.docker
+++ b/tests/docker/dockerfiles/debian-armhf-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Stretch base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
# Add the foreign architecture we want and install dependencies
RUN dpkg --add-architecture armhf
diff --git a/tests/docker/dockerfiles/debian-hppa-cross.docker b/tests/docker/dockerfiles/debian-hppa-cross.docker
index 5c68b2d3304..3d6c65a3efc 100644
--- a/tests/docker/dockerfiles/debian-hppa-cross.docker
+++ b/tests/docker/dockerfiles/debian-hppa-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Buster base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
RUN apt update && \
DEBIAN_FRONTEND=noninteractive eatmydata \
diff --git a/tests/docker/dockerfiles/debian-m68k-cross.docker b/tests/docker/dockerfiles/debian-m68k-cross.docker
index 25edc80e9a3..fcb10e35347 100644
--- a/tests/docker/dockerfiles/debian-m68k-cross.docker
+++ b/tests/docker/dockerfiles/debian-m68k-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Buster base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
RUN apt update && \
DEBIAN_FRONTEND=noninteractive eatmydata \
diff --git a/tests/docker/dockerfiles/debian-mips-cross.docker b/tests/docker/dockerfiles/debian-mips-cross.docker
index 08a8e1c29cc..26c154014db 100644
--- a/tests/docker/dockerfiles/debian-mips-cross.docker
+++ b/tests/docker/dockerfiles/debian-mips-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Buster base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
MAINTAINER Philippe Mathieu-Daudé <f4bug@amsat.org>
diff --git a/tests/docker/dockerfiles/debian-mips64-cross.docker b/tests/docker/dockerfiles/debian-mips64-cross.docker
index 1a79505d696..09c2ba584e5 100644
--- a/tests/docker/dockerfiles/debian-mips64-cross.docker
+++ b/tests/docker/dockerfiles/debian-mips64-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Buster base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
RUN apt update && \
DEBIAN_FRONTEND=noninteractive eatmydata \
diff --git a/tests/docker/dockerfiles/debian-mips64el-cross.docker b/tests/docker/dockerfiles/debian-mips64el-cross.docker
index 453b53ef72c..c990b683b7a 100644
--- a/tests/docker/dockerfiles/debian-mips64el-cross.docker
+++ b/tests/docker/dockerfiles/debian-mips64el-cross.docker
@@ -4,7 +4,7 @@
# This docker target builds on the debian Stretch base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
MAINTAINER Philippe Mathieu-Daudé <f4bug@amsat.org>
diff --git a/tests/docker/dockerfiles/debian-mipsel-cross.docker b/tests/docker/dockerfiles/debian-mipsel-cross.docker
index 3b6e975c686..0e5dd42d3c4 100644
--- a/tests/docker/dockerfiles/debian-mipsel-cross.docker
+++ b/tests/docker/dockerfiles/debian-mipsel-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Stretch base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
MAINTAINER Philippe Mathieu-Daudé <f4bug@amsat.org>
diff --git a/tests/docker/dockerfiles/debian-powerpc-cross.docker b/tests/docker/dockerfiles/debian-powerpc-cross.docker
index 89dd4fbf870..07e1789650b 100644
--- a/tests/docker/dockerfiles/debian-powerpc-cross.docker
+++ b/tests/docker/dockerfiles/debian-powerpc-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Buster base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
RUN apt update && \
DEBIAN_FRONTEND=noninteractive eatmydata \
diff --git a/tests/docker/dockerfiles/debian-ppc64-cross.docker b/tests/docker/dockerfiles/debian-ppc64-cross.docker
index 4bf88ab02dd..8efe68874ed 100644
--- a/tests/docker/dockerfiles/debian-ppc64-cross.docker
+++ b/tests/docker/dockerfiles/debian-ppc64-cross.docker
@@ -2,7 +2,7 @@
# Docker ppc64 cross-compiler target
#
# This docker target builds on the debian Buster base image.
-FROM qemu:debian10
+FROM qemu/debian10
RUN apt update && \
DEBIAN_FRONTEND=noninteractive eatmydata \
diff --git a/tests/docker/dockerfiles/debian-ppc64el-cross.docker b/tests/docker/dockerfiles/debian-ppc64el-cross.docker
index cd386f01d93..1146a06be62 100644
--- a/tests/docker/dockerfiles/debian-ppc64el-cross.docker
+++ b/tests/docker/dockerfiles/debian-ppc64el-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Stretch base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
# Add the foreign architecture we want and install dependencies
RUN dpkg --add-architecture ppc64el && \
diff --git a/tests/docker/dockerfiles/debian-riscv64-cross.docker b/tests/docker/dockerfiles/debian-riscv64-cross.docker
index 5e2d6ddb600..2bbff19772a 100644
--- a/tests/docker/dockerfiles/debian-riscv64-cross.docker
+++ b/tests/docker/dockerfiles/debian-riscv64-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Buster base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
RUN apt update && \
DEBIAN_FRONTEND=noninteractive eatmydata \
diff --git a/tests/docker/dockerfiles/debian-s390x-cross.docker b/tests/docker/dockerfiles/debian-s390x-cross.docker
index 43fe59836f2..9f2ab51eb09 100644
--- a/tests/docker/dockerfiles/debian-s390x-cross.docker
+++ b/tests/docker/dockerfiles/debian-s390x-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Stretch base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
# Add the s390x architecture
RUN dpkg --add-architecture s390x
diff --git a/tests/docker/dockerfiles/debian-sh4-cross.docker b/tests/docker/dockerfiles/debian-sh4-cross.docker
index 9d7663764e4..fd3af895759 100644
--- a/tests/docker/dockerfiles/debian-sh4-cross.docker
+++ b/tests/docker/dockerfiles/debian-sh4-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Buster base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
RUN apt update && \
DEBIAN_FRONTEND=noninteractive eatmydata \
diff --git a/tests/docker/dockerfiles/debian-sparc64-cross.docker b/tests/docker/dockerfiles/debian-sparc64-cross.docker
index 31fd34f120b..f4bb9b561cf 100644
--- a/tests/docker/dockerfiles/debian-sparc64-cross.docker
+++ b/tests/docker/dockerfiles/debian-sparc64-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Buster base image.
#
-FROM qemu:debian10
+FROM qemu/debian10
RUN apt update && \
DEBIAN_FRONTEND=noninteractive eatmydata \
diff --git a/tests/docker/dockerfiles/debian-tricore-cross.docker b/tests/docker/dockerfiles/debian-tricore-cross.docker
index 4a0f7706a39..769d95c77bb 100644
--- a/tests/docker/dockerfiles/debian-tricore-cross.docker
+++ b/tests/docker/dockerfiles/debian-tricore-cross.docker
@@ -7,7 +7,7 @@
#
# SPDX-License-Identifier: GPL-2.0-or-later
#
-FROM qemu:debian9
+FROM qemu/debian9
MAINTAINER Philippe Mathieu-Daudé <f4bug@amsat.org>
diff --git a/tests/docker/dockerfiles/debian-win32-cross.docker b/tests/docker/dockerfiles/debian-win32-cross.docker
index d16d6431bc8..b045e821b91 100644
--- a/tests/docker/dockerfiles/debian-win32-cross.docker
+++ b/tests/docker/dockerfiles/debian-win32-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Stretch MXE base image.
#
-FROM qemu:debian9-mxe
+FROM qemu/debian9-mxe
MAINTAINER Philippe Mathieu-Daudé <f4bug@amsat.org>
diff --git a/tests/docker/dockerfiles/debian-win64-cross.docker b/tests/docker/dockerfiles/debian-win64-cross.docker
index b0bc960445b..2fc9cfcbc66 100644
--- a/tests/docker/dockerfiles/debian-win64-cross.docker
+++ b/tests/docker/dockerfiles/debian-win64-cross.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Stretch MXE base image.
#
-FROM qemu:debian9-mxe
+FROM qemu/debian9-mxe
MAINTAINER Philippe Mathieu-Daudé <f4bug@amsat.org>
diff --git a/tests/docker/dockerfiles/debian9-mxe.docker b/tests/docker/dockerfiles/debian9-mxe.docker
index 62ff1cecf2d..ae2c222a6f0 100644
--- a/tests/docker/dockerfiles/debian9-mxe.docker
+++ b/tests/docker/dockerfiles/debian9-mxe.docker
@@ -3,7 +3,7 @@
#
# This docker target builds on the debian Stretch base image.
#
-FROM qemu:debian9
+FROM qemu/debian9
MAINTAINER Philippe Mathieu-Daudé <f4bug@amsat.org>
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 16/30] .gitignore: un-ignore .gitlab-ci.d
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (14 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 15/30] tests/docker: change tag naming scheme of our images Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-29 9:25 ` Thomas Huth
2020-06-29 10:04 ` Philippe Mathieu-Daudé
2020-06-26 18:13 ` [PATCH v3 17/30] gitlab-ci: Fix the change rules after moving the YML files Alex Bennée
` (14 subsequent siblings)
30 siblings, 2 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, berrange, Alex Bennée, richard.henderson, f4bug, cota,
aurelien
The sooner we deprecate in-tree builds the sooner this mess of regexes
can be thrown away.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
v2
- just use explicit !/.gitlab-ci.d
---
.gitignore | 1 +
1 file changed, 1 insertion(+)
diff --git a/.gitignore b/.gitignore
index 90acb4347d4..2992d15931a 100644
--- a/.gitignore
+++ b/.gitignore
@@ -93,6 +93,7 @@
*.tp
*.vr
*.d
+!/.gitlab-ci.d
!/scripts/qemu-guest-agent/fsfreeze-hook.d
*.o
.sdk
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 17/30] gitlab-ci: Fix the change rules after moving the YML files
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (15 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 16/30] .gitignore: un-ignore .gitlab-ci.d Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-07-02 7:42 ` Laszlo Ersek
2020-06-26 18:13 ` [PATCH v3 18/30] gitlab: introduce explicit "container" and "build" stages Alex Bennée
` (13 subsequent siblings)
30 siblings, 1 reply; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, Thomas Huth, berrange, Philippe Mathieu-Daudé,
richard.henderson, f4bug, Laszlo Ersek, cota, aurelien
From: Thomas Huth <thuth@redhat.com>
The edk2.yml and opensbi.yml files have recently been moved/renamed,
but the change has not been reflected in the rules in the YML files
yet.
Fixes: 922febe2af ("Move edk2 and opensbi YAML files to .gitlab-ci.d folder")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200625151627.24986-1-thuth@redhat.com>
---
.gitlab-ci.d/edk2.yml | 2 +-
.gitlab-ci.d/opensbi.yml | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/.gitlab-ci.d/edk2.yml b/.gitlab-ci.d/edk2.yml
index 088ba4b43a3..a9990b71475 100644
--- a/.gitlab-ci.d/edk2.yml
+++ b/.gitlab-ci.d/edk2.yml
@@ -2,7 +2,7 @@ docker-edk2:
stage: build
rules: # Only run this job when the Dockerfile is modified
- changes:
- - .gitlab-ci-edk2.yml
+ - .gitlab-ci.d/edk2.yml
- .gitlab-ci.d/edk2/Dockerfile
when: always
image: docker:19.03.1
diff --git a/.gitlab-ci.d/opensbi.yml b/.gitlab-ci.d/opensbi.yml
index dd051c01245..6a1750784ac 100644
--- a/.gitlab-ci.d/opensbi.yml
+++ b/.gitlab-ci.d/opensbi.yml
@@ -2,7 +2,7 @@ docker-opensbi:
stage: build
rules: # Only run this job when the Dockerfile is modified
- changes:
- - .gitlab-ci-opensbi.yml
+ - .gitlab-ci.d/opensbi.yml
- .gitlab-ci.d/opensbi/Dockerfile
when: always
image: docker:19.03.1
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 18/30] gitlab: introduce explicit "container" and "build" stages
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (16 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 17/30] gitlab-ci: Fix the change rules after moving the YML files Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-26 18:13 ` [PATCH v3 19/30] gitlab: build all container images during CI Alex Bennée
` (12 subsequent siblings)
30 siblings, 0 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, Thomas Huth, berrange, Laszlo Ersek, richard.henderson,
f4bug, Wainer dos Santos Moschetta, Philippe Mathieu-Daudé,
Alex Bennée, cota, aurelien
From: Daniel P. Berrangé <berrange@redhat.com>
If no stage is listed, jobs get put in an implicit "test" stage.
Some jobs which create container images to be used by later stages
are currently listed as in a "build" stages.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622153318.751107-2-berrange@redhat.com>
---
.gitlab-ci.d/edk2.yml | 3 ++-
.gitlab-ci.d/opensbi.yml | 3 ++-
.gitlab-ci.yml | 11 +++++++++++
3 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/.gitlab-ci.d/edk2.yml b/.gitlab-ci.d/edk2.yml
index a9990b71475..e1e04524166 100644
--- a/.gitlab-ci.d/edk2.yml
+++ b/.gitlab-ci.d/edk2.yml
@@ -1,5 +1,5 @@
docker-edk2:
- stage: build
+ stage: containers
rules: # Only run this job when the Dockerfile is modified
- changes:
- .gitlab-ci.d/edk2.yml
@@ -24,6 +24,7 @@ docker-edk2:
- docker push $IMAGE_TAG
build-edk2:
+ stage: build
rules: # Only run this job when ...
- changes: # ... roms/edk2/ is modified (submodule updated)
- roms/edk2/*
diff --git a/.gitlab-ci.d/opensbi.yml b/.gitlab-ci.d/opensbi.yml
index 6a1750784ac..62088ec5ec1 100644
--- a/.gitlab-ci.d/opensbi.yml
+++ b/.gitlab-ci.d/opensbi.yml
@@ -1,5 +1,5 @@
docker-opensbi:
- stage: build
+ stage: containers
rules: # Only run this job when the Dockerfile is modified
- changes:
- .gitlab-ci.d/opensbi.yml
@@ -24,6 +24,7 @@ docker-opensbi:
- docker push $IMAGE_TAG
build-opensbi:
+ stage: build
rules: # Only run this job when ...
- changes: # ... roms/opensbi/ is modified (submodule updated)
- roms/opensbi/*
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 349c77aa580..9fdc752ea63 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -1,3 +1,7 @@
+stages:
+ - containers
+ - build
+
include:
- local: '/.gitlab-ci.d/edk2.yml'
- local: '/.gitlab-ci.d/opensbi.yml'
@@ -17,6 +21,7 @@ include:
- JOBS=$(expr $(nproc) + 1)
build-system1:
+ stage: build
image: ubuntu:19.10
<<: *before_script_apt
script:
@@ -31,6 +36,7 @@ build-system1:
- make -j"$JOBS" check
build-system2:
+ stage: build
image: fedora:latest
<<: *before_script_dnf
script:
@@ -46,6 +52,7 @@ build-system2:
- make -j"$JOBS" check
build-disabled:
+ stage: build
image: fedora:latest
<<: *before_script_dnf
script:
@@ -62,6 +69,7 @@ build-disabled:
- make -j"$JOBS" check-qtest SPEED=slow
build-tcg-disabled:
+ stage: build
image: centos:8
<<: *before_script_dnf
script:
@@ -82,6 +90,7 @@ build-tcg-disabled:
260 261 262 263 264 270 272 273 277 279
build-user:
+ stage: build
<<: *before_script_apt
script:
- mkdir build
@@ -92,6 +101,7 @@ build-user:
- make run-tcg-tests-i386-linux-user run-tcg-tests-x86_64-linux-user
build-clang:
+ stage: build
image: fedora:latest
<<: *before_script_dnf
script:
@@ -106,6 +116,7 @@ build-clang:
- make -j"$JOBS" check
build-tci:
+ stage: build
image: centos:8
<<: *before_script_dnf
script:
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 19/30] gitlab: build all container images during CI
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (17 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 18/30] gitlab: introduce explicit "container" and "build" stages Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-29 9:54 ` Thomas Huth
2020-06-26 18:13 ` [PATCH v3 20/30] gitlab: convert jobs to use custom built containers Alex Bennée
` (11 subsequent siblings)
30 siblings, 1 reply; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, Thomas Huth, berrange, Alex Bennée, richard.henderson,
f4bug, Wainer dos Santos Moschetta, Philippe Mathieu-Daudé,
cota, aurelien
From: Daniel P. Berrangé <berrange@redhat.com>
We have a number of container images in tests/docker/dockerfiles
that are intended to provide well defined environments for doing
test builds. We want our CI system to use these containers too.
This introduces builds of all of them as the first stage in the
CI, so that the built containers are available for later build
jobs. The containers are setup to use the GitLab container
registry as the cache, so we only pay the penalty of the full
build when the dockerfiles change. The main qemu-project/qemu
repo is used as a second cache, so that users forking QEMU will
see a fast turnaround time on their CI jobs.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200622153318.751107-3-berrange@redhat.com>
[AJB: tweak the tag format]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Thomas Huth <thuth@redhat.com>
---
.gitlab-ci.d/containers.yml | 248 ++++++++++++++++++++++++++++++++++++
.gitlab-ci.yml | 3 +
2 files changed, 251 insertions(+)
create mode 100644 .gitlab-ci.d/containers.yml
diff --git a/.gitlab-ci.d/containers.yml b/.gitlab-ci.d/containers.yml
new file mode 100644
index 00000000000..580439647ef
--- /dev/null
+++ b/.gitlab-ci.d/containers.yml
@@ -0,0 +1,248 @@
+
+
+.container_job_template: &container_job_definition
+ image: docker:stable
+ stage: containers
+ services:
+ - docker:dind
+ before_script:
+ - export TAG="$CI_REGISTRY_IMAGE/qemu/$NAME:latest"
+ - export COMMON_TAG="$CI_REGISTRY/qemu-project/qemu/$NAME:latest"
+ - docker info
+ - docker login registry.gitlab.com -u "$CI_REGISTRY_USER" -p "$CI_REGISTRY_PASSWORD"
+ script:
+ - docker pull "$TAG" || docker pull "$COMMON_TAG" || true
+ - sed -i -e "s,FROM qemu/,FROM $CI_REGISTRY_IMAGE/qemu/," tests/docker/dockerfiles/$NAME.docker
+ - docker build --cache-from "$TAG" --cache-from "$COMMON_TAG" --tag "$TAG" -f "tests/docker/dockerfiles/$NAME.docker" tests/docker/dockerfiles
+ - docker push "$TAG"
+ after_script:
+ - docker logout
+
+amd64-centos7-container:
+ <<: *container_job_definition
+ variables:
+ NAME: centos7
+
+amd64-centos8-container:
+ <<: *container_job_definition
+ variables:
+ NAME: centos8
+
+amd64-debian10-container:
+ <<: *container_job_definition
+ variables:
+ NAME: debian10
+
+amd64-debian11-container:
+ <<: *container_job_definition
+ variables:
+ NAME: debian11
+
+amd64-debian9-container:
+ <<: *container_job_definition
+ variables:
+ NAME: debian9
+
+amd64-debian9-mxe-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian9-container']
+ variables:
+ NAME: debian9-mxe
+
+alpha-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-alpha-cross
+
+amd64-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-amd64-cross
+
+amd64-debian-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-amd64
+
+arm64-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-arm64-cross
+
+arm64-test-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian11-container']
+ variables:
+ NAME: debian-arm64-test-cross
+
+armel-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-armel-cross
+
+armhf-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-armhf-cross
+
+hppa-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-hppa-cross
+
+m68k-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-m68k-cross
+
+mips64-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-mips64-cross
+
+mips64el-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-mips64el-cross
+
+mips-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-mips-cross
+
+mipsel-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-mipsel-cross
+
+powerpc-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-powerpc-cross
+
+ppc64-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-ppc64-cross
+
+ppc64el-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-ppc64el-cross
+
+riscv64-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-riscv64-cross
+
+s390x-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-s390x-cross
+
+sh4-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-sh4-cross
+
+sparc64-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-sparc64-cross
+
+tricore-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian9-container']
+ variables:
+ NAME: debian-tricore-cross
+
+win32-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer3
+ needs: ['amd64-debian9-mxe-container']
+ variables:
+ NAME: debian-win32-cross
+
+win64-debian-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer3
+ needs: ['amd64-debian9-mxe-container']
+ variables:
+ NAME: debian-win64-cross
+
+xtensa-debian-cross-container:
+ <<: *container_job_definition
+ variables:
+ NAME: debian-xtensa-cross
+
+cris-fedora-cross-container:
+ <<: *container_job_definition
+ variables:
+ NAME: fedora-cris-cross
+
+amd64-fedora-container:
+ <<: *container_job_definition
+ variables:
+ NAME: fedora
+
+i386-fedora-cross-container:
+ <<: *container_job_definition
+ variables:
+ NAME: fedora-i386-cross
+
+amd64-ubuntu1804-container:
+ <<: *container_job_definition
+ variables:
+ NAME: ubuntu1804
+
+amd64-ubuntu2004-container:
+ <<: *container_job_definition
+ variables:
+ NAME: ubuntu2004
+
+amd64-ubuntu-container:
+ <<: *container_job_definition
+ variables:
+ NAME: ubuntu
+
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 9fdc752ea63..72d688875fd 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -1,10 +1,13 @@
stages:
- containers
+ - containers-layer2
+ - containers-layer3
- build
include:
- local: '/.gitlab-ci.d/edk2.yml'
- local: '/.gitlab-ci.d/opensbi.yml'
+ - local: '/.gitlab-ci.d/containers.yml'
.update_apt_template: &before_script_apt
before_script:
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 20/30] gitlab: convert jobs to use custom built containers
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (18 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 19/30] gitlab: build all container images during CI Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-29 10:13 ` Thomas Huth
2020-06-26 18:13 ` [PATCH v3 21/30] gitlab: build containers with buildkit and metadata Alex Bennée
` (10 subsequent siblings)
30 siblings, 1 reply; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, Thomas Huth, berrange, Alex Bennée, richard.henderson,
f4bug, Wainer dos Santos Moschetta, Philippe Mathieu-Daudé,
cota, aurelien
From: Daniel P. Berrangé <berrange@redhat.com>
Now that we're building standard container images from
dockerfiles in tests/docker/dockerfiles, we can convert
the build jobs to use them. The key benefit of this is
that a contributor can now more easily replicate the CI
environment on their local machine. The container images
are cached too, so we are not spending time waiting for
the apt-get/dnf package installs to complete.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20200622153318.751107-4-berrange@redhat.com>
[AJB: tweak naming convention]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
.gitlab-ci.yml | 187 +++++++++++++++++++++----------------------------
1 file changed, 81 insertions(+), 106 deletions(-)
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 72d688875fd..a7abc55a5c6 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -9,133 +9,108 @@ include:
- local: '/.gitlab-ci.d/opensbi.yml'
- local: '/.gitlab-ci.d/containers.yml'
-.update_apt_template: &before_script_apt
- before_script:
- - apt-get update -qq
- - apt-get install -y -qq git gcc libglib2.0-dev libpixman-1-dev make
- genisoimage
- - JOBS=$(expr $(nproc) + 1)
-
-.update_dnf_template: &before_script_dnf
- before_script:
- - dnf update -y
- - dnf install -y bzip2 diffutils gcc git genisoimage findutils glib2-devel
- make python3 perl-podlators perl-Test-Harness pixman-devel zlib-devel
- - JOBS=$(expr $(nproc) + 1)
+.native_build_job_template: &native_build_job_definition
+ stage: build
+ image: $CI_REGISTRY_IMAGE/qemu/$IMAGE:latest
+ before_script:
+ - JOBS=$(expr $(nproc) + 1)
+ script:
+ - mkdir build
+ - cd build
+ - if test -n "$TARGETS";
+ then
+ ../configure --enable-werror $CONFIGURE_ARGS --target-list="$TARGETS" ;
+ else
+ ../configure --enable-werror $CONFIGURE_ARGS ;
+ fi
+ - make -j"$JOBS"
+ - make -j"$JOBS" $MAKE_CHECK_ARGS
build-system1:
- stage: build
- image: ubuntu:19.10
- <<: *before_script_apt
- script:
- - apt-get install -y -qq libgtk-3-dev libvte-dev nettle-dev libcacard-dev
- libusb-dev libvde-dev libspice-protocol-dev libgl1-mesa-dev libvdeplug-dev
- - mkdir build
- - cd build
- - ../configure --enable-werror --target-list="aarch64-softmmu alpha-softmmu
- cris-softmmu hppa-softmmu lm32-softmmu moxie-softmmu microblazeel-softmmu
- mips64el-softmmu m68k-softmmu ppc-softmmu riscv64-softmmu sparc-softmmu"
- - make -j"$JOBS"
- - make -j"$JOBS" check
+ <<: *native_build_job_definition
+ variables:
+ IMAGE: ubuntu2004
+ TARGETS: aarch64-softmmu alpha-softmmu cris-softmmu hppa-softmmu lm32-softmmu
+ moxie-softmmu microblazeel-softmmu mips64el-softmmu m68k-softmmu ppc-softmmu
+ riscv64-softmmu sparc-softmmu
+ MAKE_CHECK_ARGS: check
build-system2:
- stage: build
- image: fedora:latest
- <<: *before_script_dnf
- script:
- - yum install -y SDL2-devel libgcrypt-devel brlapi-devel libaio-devel
- libfdt-devel lzo-devel librdmacm-devel libibverbs-devel libibumad-devel
- libzstd-devel
- - mkdir build
- - cd build
- - ../configure --enable-werror --target-list="tricore-softmmu unicore32-softmmu
- microblaze-softmmu mips-softmmu riscv32-softmmu s390x-softmmu sh4-softmmu
- sparc64-softmmu x86_64-softmmu xtensa-softmmu nios2-softmmu or1k-softmmu"
- - make -j"$JOBS"
- - make -j"$JOBS" check
+ <<: *native_build_job_definition
+ variables:
+ IMAGE: fedora
+ TARGETS: tricore-softmmu unicore32-softmmu microblaze-softmmu mips-softmmu
+ riscv32-softmmu s390x-softmmu sh4-softmmu sparc64-softmmu x86_64-softmmu
+ xtensa-softmmu nios2-softmmu or1k-softmmu
+ MAKE_CHECK_ARGS: check
build-disabled:
- stage: build
- image: fedora:latest
- <<: *before_script_dnf
- script:
- - mkdir build
- - cd build
- - ../configure --enable-werror --disable-rdma --disable-slirp --disable-curl
+ <<: *native_build_job_definition
+ variables:
+ IMAGE: fedora
+ CONFIGURE_ARGS: --disable-rdma --disable-slirp --disable-curl
--disable-capstone --disable-live-block-migration --disable-glusterfs
--disable-replication --disable-coroutine-pool --disable-smartcard
--disable-guest-agent --disable-curses --disable-libxml2 --disable-tpm
--disable-qom-cast-debug --disable-spice --disable-vhost-vsock
--disable-vhost-net --disable-vhost-crypto --disable-vhost-user
- --target-list="i386-softmmu ppc64-softmmu mips64-softmmu i386-linux-user"
- - make -j"$JOBS"
- - make -j"$JOBS" check-qtest SPEED=slow
+ TARGETS: i386-softmmu ppc64-softmmu mips64-softmmu i386-linux-user
+ MAKE_CHECK_ARGS: check-qtest SPEED=slow
build-tcg-disabled:
- stage: build
- image: centos:8
- <<: *before_script_dnf
- script:
- - dnf install -y clang gtk3-devel libusbx-devel libgcrypt-devel
- - mkdir build
- - cd build
- - ../configure --cc=clang --enable-werror --disable-tcg --audio-drv-list=""
- - make -j"$JOBS"
- - make check-unit
- - make check-qapi-schema
- - cd tests/qemu-iotests/
- - ./check -raw 001 002 003 004 005 008 009 010 011 012 021 025 032 033 048
+ <<: *native_build_job_definition
+ variables:
+ IMAGE: centos8
+ script:
+ - mkdir build
+ - cd build
+ - ../configure --disable-tcg --audio-drv-list=""
+ - make -j"$JOBS"
+ - make check-unit
+ - make check-qapi-schema
+ - cd tests/qemu-iotests/
+ - ./check -raw 001 002 003 004 005 008 009 010 011 012 021 025 032 033 048
052 063 077 086 101 104 106 113 148 150 151 152 157 159 160 163
170 171 183 184 192 194 197 208 215 221 222 226 227 236 253 277
- - ./check -qcow2 028 051 056 057 058 065 067 068 082 085 091 095 096 102 122
+ - ./check -qcow2 028 051 056 057 058 065 067 068 082 085 091 095 096 102 122
124 132 139 142 144 145 151 152 155 157 165 194 196 197 200 202
208 209 215 216 218 222 227 234 246 247 248 250 254 255 257 258
260 261 262 263 264 270 272 273 277 279
build-user:
- stage: build
- <<: *before_script_apt
- script:
- - mkdir build
- - cd build
- - ../configure --enable-werror --disable-system --disable-guest-agent
- --disable-capstone --disable-slirp --disable-fdt
- - make -j"$JOBS"
- - make run-tcg-tests-i386-linux-user run-tcg-tests-x86_64-linux-user
+ <<: *native_build_job_definition
+ variables:
+ IMAGE: ubuntu2004
+ CONFIGURE_ARGS: --disable-system --disable-guest-agent
+ --disable-capstone --disable-slirp --disable-fdt
+ MAKE_CHECK_ARGS: run-tcg-tests-i386-linux-user run-tcg-tests-x86_64-linux-user
build-clang:
- stage: build
- image: fedora:latest
- <<: *before_script_dnf
- script:
- - yum install -y clang SDL2-devel libattr-devel libcap-ng-devel xfsprogs-devel
- libiscsi-devel libnfs-devel libseccomp-devel gnutls-devel librbd-devel
- - mkdir build
- - cd build
- - ../configure --cc=clang --cxx=clang++ --enable-werror
- --target-list="alpha-softmmu arm-softmmu m68k-softmmu mips64-softmmu
- ppc-softmmu s390x-softmmu x86_64-softmmu arm-linux-user"
- - make -j"$JOBS"
- - make -j"$JOBS" check
+ <<: *native_build_job_definition
+ variables:
+ IMAGE: fedora
+ CONFIGURE_ARGS: --cc=clang --cxx=clang++
+ TARGETS: alpha-softmmu arm-softmmu m68k-softmmu mips64-softmmu
+ ppc-softmmu s390x-softmmu x86_64-softmmu arm-linux-user
+ MAKE_CHECK_ARGS: check
build-tci:
- stage: build
- image: centos:8
- <<: *before_script_dnf
- script:
- - TARGETS="aarch64 alpha arm hppa m68k microblaze moxie ppc64 s390x x86_64"
- - mkdir build
- - cd build
- - ../configure --enable-tcg-interpreter
- --target-list="$(for tg in $TARGETS; do echo -n ${tg}'-softmmu '; done)"
- - make -j"$JOBS"
- - make run-tcg-tests-x86_64-softmmu
- - make tests/qtest/boot-serial-test tests/qtest/cdrom-test tests/qtest/pxe-test
- - for tg in $TARGETS ; do
- export QTEST_QEMU_BINARY="${tg}-softmmu/qemu-system-${tg}" ;
- ./tests/qtest/boot-serial-test || exit 1 ;
- ./tests/qtest/cdrom-test || exit 1 ;
- done
- - QTEST_QEMU_BINARY="x86_64-softmmu/qemu-system-x86_64" ./tests/qtest/pxe-test
- - QTEST_QEMU_BINARY="s390x-softmmu/qemu-system-s390x"
- ./tests/qtest/pxe-test -m slow
+ <<: *native_build_job_definition
+ variables:
+ IMAGE: fedora
+ script:
+ - TARGETS="aarch64 alpha arm hppa m68k microblaze moxie ppc64 s390x x86_64"
+ - mkdir build
+ - cd build
+ - ../configure --enable-tcg-interpreter
+ --target-list="$(for tg in $TARGETS; do echo -n ${tg}'-softmmu '; done)"
+ - make -j"$JOBS"
+ - make run-tcg-tests-x86_64-softmmu
+ - make tests/qtest/boot-serial-test tests/qtest/cdrom-test tests/qtest/pxe-test
+ - for tg in $TARGETS ; do
+ export QTEST_QEMU_BINARY="${tg}-softmmu/qemu-system-${tg}" ;
+ ./tests/qtest/boot-serial-test || exit 1 ;
+ ./tests/qtest/cdrom-test || exit 1 ;
+ done
+ - QTEST_QEMU_BINARY="x86_64-softmmu/qemu-system-x86_64" ./tests/qtest/pxe-test
+ - QTEST_QEMU_BINARY="s390x-softmmu/qemu-system-s390x" ./tests/qtest/pxe-test -m slow
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 21/30] gitlab: build containers with buildkit and metadata
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (19 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 20/30] gitlab: convert jobs to use custom built containers Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-26 18:13 ` [PATCH v3 22/30] tests/docker: add --registry support to tooling Alex Bennée
` (9 subsequent siblings)
30 siblings, 0 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, berrange, Alex Bennée, richard.henderson, f4bug, cota,
aurelien
According to the documentation to be able to use --cache-from for
remote registries you need to enable both buildkit and inline the
metadata. We want to do this to support pulling from gitlab when users
build their local docker images.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
.gitlab-ci.d/containers.yml | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/.gitlab-ci.d/containers.yml b/.gitlab-ci.d/containers.yml
index 580439647ef..ba9c24e98f1 100644
--- a/.gitlab-ci.d/containers.yml
+++ b/.gitlab-ci.d/containers.yml
@@ -13,7 +13,9 @@
script:
- docker pull "$TAG" || docker pull "$COMMON_TAG" || true
- sed -i -e "s,FROM qemu/,FROM $CI_REGISTRY_IMAGE/qemu/," tests/docker/dockerfiles/$NAME.docker
- - docker build --cache-from "$TAG" --cache-from "$COMMON_TAG" --tag "$TAG" -f "tests/docker/dockerfiles/$NAME.docker" tests/docker/dockerfiles
+ - DOCKER_BUILDKIT=1 docker build --cache-from "$TAG" --cache-from "$COMMON_TAG" --tag "$TAG"
+ --build-arg BUILDKIT_INLINE_CACHE=1
+ -f "tests/docker/dockerfiles/$NAME.docker" tests/docker/dockerfiles
- docker push "$TAG"
after_script:
- docker logout
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 22/30] tests/docker: add --registry support to tooling
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (20 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 21/30] gitlab: build containers with buildkit and metadata Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-26 18:13 ` [PATCH v3 23/30] tests/docker: add packages needed for check-acceptance Alex Bennée
` (8 subsequent siblings)
30 siblings, 0 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, berrange, Alex Bennée, richard.henderson, f4bug,
Philippe Mathieu-Daudé,
cota, aurelien
This allows us to point the tools towards a registry from which they
can grab pre-built layers instead of doing everything from scratch
each time. To enable this we need to be using the DOCKER_BUILDKIT
engine.
[AJB: note registry.gitlab.com/stsquad/qemu is for my testing, the
final version will see DOCKER_REGISTRY default to registry.gitlab.com/qemu-project/qemu]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
v2
- add a pull stage to pull images from the registry
- enable BUILDKIT and BUILDKIT_INLINE_CACHE
- don't invoke BUILDKIT on Travis
---
tests/docker/Makefile.include | 3 +++
tests/docker/docker.py | 37 +++++++++++++++++++++++++++++++----
2 files changed, 36 insertions(+), 4 deletions(-)
diff --git a/tests/docker/Makefile.include b/tests/docker/Makefile.include
index 6d6ced1e463..8139e8467d4 100644
--- a/tests/docker/Makefile.include
+++ b/tests/docker/Makefile.include
@@ -13,6 +13,7 @@ DOCKER_IMAGES := $(sort $(notdir $(basename $(wildcard $(DOCKER_FILES_DIR)/*.doc
DOCKER_TARGETS := $(patsubst %,docker-image-%,$(DOCKER_IMAGES))
# Use a global constant ccache directory to speed up repetitive builds
DOCKER_CCACHE_DIR := $$HOME/.cache/qemu-docker-ccache
+DOCKER_REGISTRY := $(if $(REGISTRY),$(REGISTRY),registry.gitlab.com/stsquad/qemu)
DOCKER_TESTS := $(notdir $(shell \
find $(SRC_PATH)/tests/docker/ -name 'test-*' -type f))
@@ -57,6 +58,7 @@ docker-image-%: $(DOCKER_FILES_DIR)/%.docker
$(call quiet-command,\
$(DOCKER_SCRIPT) build -t qemu/$* -f $< \
$(if $V,,--quiet) $(if $(NOCACHE),--no-cache) \
+ $(if $(DOCKER_REGISTRY),--registry $(DOCKER_REGISTRY)) \
$(if $(NOUSER),,--add-current-user) \
$(if $(EXTRA_FILES),--extra-files $(EXTRA_FILES))\
$(if $(EXECUTABLE),--include-executable=$(EXECUTABLE)),\
@@ -213,6 +215,7 @@ endif
@echo ' Include extra files in image.'
@echo ' ENGINE=auto/docker/podman'
@echo ' Specify which container engine to run.'
+ @echo ' REGISTRY=url Cache builds from registry (default:$(DOCKER_REGISTRY))'
# This rule if for directly running against an arbitrary docker target.
# It is called by the expanded docker targets (e.g. make
diff --git a/tests/docker/docker.py b/tests/docker/docker.py
index cc6f76caa60..a31ac287150 100755
--- a/tests/docker/docker.py
+++ b/tests/docker/docker.py
@@ -221,6 +221,13 @@ class Docker(object):
""" Running Docker commands """
def __init__(self):
self._command = _guess_engine_command()
+
+ if "docker" in self._command and "TRAVIS" not in os.environ:
+ os.environ["DOCKER_BUILDKIT"] = "1"
+ self._buildkit = True
+ else:
+ self._buildkit = False
+
self._instance = None
atexit.register(self._kill_instances)
signal.signal(signal.SIGTERM, self._kill_instances)
@@ -289,10 +296,20 @@ class Docker(object):
return labels.get("com.qemu.dockerfile-checksum", "")
def build_image(self, tag, docker_dir, dockerfile,
- quiet=True, user=False, argv=None, extra_files_cksum=[]):
+ quiet=True, user=False, argv=None, registry=None,
+ extra_files_cksum=[]):
if argv is None:
argv = []
+ if registry is not None:
+ dockerfile = dockerfile.replace("FROM qemu/",
+ "FROM %s/qemu/" %
+ (registry))
+ # see if we can fetch a cache copy, may fail...
+ pull_args = ["pull", "%s/%s" % (registry, tag)]
+ self._do(pull_args, quiet=quiet)
+
+
tmp_df = tempfile.NamedTemporaryFile(mode="w+t",
encoding='utf-8',
dir=docker_dir, suffix=".docker")
@@ -313,8 +330,17 @@ class Docker(object):
tmp_df.flush()
- self._do_check(["build", "-t", tag, "-f", tmp_df.name] + argv +
- [docker_dir],
+ build_args = ["build", "-t", tag, "-f", tmp_df.name]
+ if self._buildkit:
+ build_args += ["--build-arg", "BUILDKIT_INLINE_CACHE=1"]
+
+ if registry is not None:
+ cache = "%s/%s" % (registry, tag)
+ build_args += ["--cache-from", cache]
+ build_args += argv
+ build_args += [docker_dir]
+
+ self._do_check(build_args,
quiet=quiet)
def update_image(self, tag, tarball, quiet=True):
@@ -403,6 +429,8 @@ class BuildCommand(SubCommand):
parser.add_argument("--add-current-user", "-u", dest="user",
action="store_true",
help="Add the current user to image's passwd")
+ parser.add_argument("--registry", "-r",
+ help="cache from docker registry")
parser.add_argument("-t", dest="tag",
help="Image Tag")
parser.add_argument("-f", dest="dockerfile",
@@ -458,7 +486,8 @@ class BuildCommand(SubCommand):
for k, v in os.environ.items()
if k.lower() in FILTERED_ENV_NAMES]
dkr.build_image(tag, docker_dir, dockerfile,
- quiet=args.quiet, user=args.user, argv=argv,
+ quiet=args.quiet, user=args.user,
+ argv=argv, registry=args.registry,
extra_files_cksum=cksum)
rmtree(docker_dir)
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 23/30] tests/docker: add packages needed for check-acceptance
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (21 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 22/30] tests/docker: add --registry support to tooling Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-29 10:11 ` Philippe Mathieu-Daudé
2020-06-29 10:15 ` Thomas Huth
2020-06-26 18:13 ` [PATCH v3 24/30] gitlab: add acceptance testing to system builds Alex Bennée
` (7 subsequent siblings)
30 siblings, 2 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, berrange, Alex Bennée, richard.henderson, f4bug,
Philippe Mathieu-Daudé,
cota, aurelien
We need additional python packages to run check-acceptance. Add them
to the docker images we will be using later.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
tests/docker/dockerfiles/fedora.docker | 7 +++++++
tests/docker/dockerfiles/ubuntu2004.docker | 10 +++++++++-
2 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/tests/docker/dockerfiles/fedora.docker b/tests/docker/dockerfiles/fedora.docker
index 798ddd2c3e0..70b6186bd3e 100644
--- a/tests/docker/dockerfiles/fedora.docker
+++ b/tests/docker/dockerfiles/fedora.docker
@@ -80,7 +80,12 @@ ENV PACKAGES \
pixman-devel \
python3 \
python3-PyYAML \
+ python3-numpy \
+ python3-opencv \
+ python3-pillow \
+ python3-pip \
python3-sphinx \
+ python3-virtualenv \
rdma-core-devel \
SDL2-devel \
snappy-devel \
@@ -89,6 +94,8 @@ ENV PACKAGES \
systemd-devel \
systemtap-sdt-devel \
tar \
+ tesseract \
+ tesseract-langpack-eng \
texinfo \
usbredir-devel \
virglrenderer-devel \
diff --git a/tests/docker/dockerfiles/ubuntu2004.docker b/tests/docker/dockerfiles/ubuntu2004.docker
index 6050ce7e8a8..f7aac840bf8 100644
--- a/tests/docker/dockerfiles/ubuntu2004.docker
+++ b/tests/docker/dockerfiles/ubuntu2004.docker
@@ -46,9 +46,17 @@ ENV PACKAGES flex bison \
libxen-dev \
libzstd-dev \
make \
- python3-yaml \
+ python3-numpy \
+ python3-opencv \
+ python3-pil \
+ python3-pip \
python3-sphinx \
+ python3-venv \
+ python3-yaml \
+ rpm2cpio \
sparse \
+ tesseract-ocr \
+ tesseract-ocr-eng \
texinfo \
xfslibs-dev\
vim
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 24/30] gitlab: add acceptance testing to system builds
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (22 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 23/30] tests/docker: add packages needed for check-acceptance Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-29 10:15 ` Philippe Mathieu-Daudé
` (2 more replies)
2020-06-26 18:13 ` [PATCH v3 25/30] tests/docker: add a linux-user testing focused image Alex Bennée
` (6 subsequent siblings)
30 siblings, 3 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, Thomas Huth, berrange, Alex Bennée, richard.henderson,
f4bug, Wainer dos Santos Moschetta, Philippe Mathieu-Daudé,
cota, aurelien
As part of migrating things from Travis to GitLab add the acceptance
tests. To do this:
- rename system1 to system-ubuntu-main
- rename system2 to system-fedora-misc
- split into build/check/acceptance
- remove -j from check stages
- use artifacts to save build stage
- add post acceptance template and use
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20200622143204.12921-16-alex.bennee@linaro.org>
---
v2
- updated with danp's docker changes
- use needs instead of dependancies
- touch all the build files to prevent rebuild
---
.gitlab-ci.yml | 66 +++++++++++++++++++++++++++++++++++++++++++++++---
.travis.yml | 23 ------------------
2 files changed, 63 insertions(+), 26 deletions(-)
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index a7abc55a5c6..5ae8130bd1a 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -1,8 +1,12 @@
+# Currently we have two build stages after our containers are built:
+# - build (for traditional build and test or first stage build)
+# - test (for test stages, using build artefacts from a build stage)
stages:
- containers
- containers-layer2
- containers-layer3
- build
+ - test
include:
- local: '/.gitlab-ci.d/edk2.yml'
@@ -24,26 +28,82 @@ include:
../configure --enable-werror $CONFIGURE_ARGS ;
fi
- make -j"$JOBS"
- - make -j"$JOBS" $MAKE_CHECK_ARGS
+ - if test -n "$MAKE_CHECK_ARGS";
+ then
+ make $MAKE_CHECK_ARGS ;
+ fi
+
+.native_test_job_template: &native_test_job_definition
+ stage: test
+ image: $CI_REGISTRY_IMAGE/qemu/$IMAGE:latest
+ script:
+ - cd build
+ - find . -type f -exec touch {} +
+ - make $MAKE_CHECK_ARGS
+
+.post_acceptance_template: &post_acceptance
+ after_script:
+ - python3 -c 'import json; r = json.load(open("tests/results/latest/results.json")); [print(t["logfile"]) for t in r["tests"] if t["status"] not in ("PASS", "SKIP")]' | xargs cat
+ - du -chs $HOME/avocado/data/cache
-build-system1:
+build:system-ubuntu-main:
<<: *native_build_job_definition
variables:
IMAGE: ubuntu2004
TARGETS: aarch64-softmmu alpha-softmmu cris-softmmu hppa-softmmu lm32-softmmu
moxie-softmmu microblazeel-softmmu mips64el-softmmu m68k-softmmu ppc-softmmu
riscv64-softmmu sparc-softmmu
+ artifacts:
+ paths:
+ - build
+
+check:system-ubuntu-main:
+ <<: *native_test_job_definition
+ needs:
+ - job: build:system-ubuntu-main
+ artifacts: true
+ variables:
+ IMAGE: ubuntu2004
MAKE_CHECK_ARGS: check
-build-system2:
+acceptance:system-ubuntu-main:
+ <<: *native_test_job_definition
+ needs:
+ - job: build:system-ubuntu-main
+ artifacts: true
+ variables:
+ IMAGE: ubuntu2004
+ MAKE_CHECK_ARGS: check-acceptance
+
+build:system-fedora-alt:
<<: *native_build_job_definition
variables:
IMAGE: fedora
TARGETS: tricore-softmmu unicore32-softmmu microblaze-softmmu mips-softmmu
riscv32-softmmu s390x-softmmu sh4-softmmu sparc64-softmmu x86_64-softmmu
xtensa-softmmu nios2-softmmu or1k-softmmu
+ artifacts:
+ paths:
+ - build
+
+check:system-fedora-alt:
+ <<: *native_test_job_definition
+ needs:
+ - job: build:system-fedora-alt
+ artifacts: true
+ variables:
+ IMAGE: fedora
MAKE_CHECK_ARGS: check
+check:system-fedora-alt:
+ <<: *native_test_job_definition
+ needs:
+ - job: build:system-fedora-alt
+ artifacts: true
+ variables:
+ IMAGE: fedora
+ MAKE_CHECK_ARGS: check-acceptance
+
build-disabled:
<<: *native_build_job_definition
variables:
diff --git a/.travis.yml b/.travis.yml
index 74158f741b1..c24dfbe377f 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -289,29 +289,6 @@ jobs:
python: 3.6
- # Acceptance (Functional) tests
- - name: "GCC check-acceptance"
- dist: bionic
- env:
- - CONFIG="--enable-tools --target-list=aarch64-softmmu,alpha-softmmu,arm-softmmu,m68k-softmmu,microblaze-softmmu,mips-softmmu,mips64el-softmmu,nios2-softmmu,or1k-softmmu,ppc-softmmu,ppc64-softmmu,s390x-softmmu,sh4-softmmu,sparc-softmmu,x86_64-softmmu,xtensa-softmmu"
- - TEST_CMD="make check-acceptance"
- - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-acceptance"
- after_script:
- - python3 -c 'import json; r = json.load(open("tests/results/latest/results.json")); [print(t["logfile"]) for t in r["tests"] if t["status"] not in ("PASS", "SKIP")]' | xargs cat
- - du -chs $HOME/avocado/data/cache
- addons:
- apt:
- packages:
- - python3-pil
- - python3-pip
- - python3-numpy
- - python3-opencv
- - python3-venv
- - rpm2cpio
- - tesseract-ocr
- - tesseract-ocr-eng
-
-
# Using newer GCC with sanitizers
- name: "GCC9 with sanitizers (softmmu)"
addons:
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 25/30] tests/docker: add a linux-user testing focused image
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (23 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 24/30] gitlab: add acceptance testing to system builds Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-29 10:18 ` Philippe Mathieu-Daudé
2020-06-26 18:13 ` [PATCH v3 26/30] gitlab: enable check-tcg for linux-user tests Alex Bennée
` (5 subsequent siblings)
30 siblings, 1 reply; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, berrange, Alex Bennée, richard.henderson, f4bug,
Philippe Mathieu-Daudé,
cota, aurelien
We happily use all the cross images for both cross-building QEMU as
well as building the linux-user tests. However calling docker from
within docker seems not to work. As we can build in Debian anyway why
not include an image that has all the compilers available for
non-docker invocation.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
.gitlab-ci.d/containers.yml | 7 +++
tests/docker/Makefile.include | 1 +
.../dockerfiles/debian-all-test-cross.docker | 53 +++++++++++++++++++
3 files changed, 61 insertions(+)
create mode 100644 tests/docker/dockerfiles/debian-all-test-cross.docker
diff --git a/.gitlab-ci.d/containers.yml b/.gitlab-ci.d/containers.yml
index ba9c24e98f1..20b2fb1de5d 100644
--- a/.gitlab-ci.d/containers.yml
+++ b/.gitlab-ci.d/containers.yml
@@ -66,6 +66,13 @@ amd64-debian-cross-container:
variables:
NAME: debian-amd64-cross
+amd64-debian-user-cross-container:
+ <<: *container_job_definition
+ stage: containers-layer2
+ needs: ['amd64-debian10-container']
+ variables:
+ NAME: debian-all-test-cross
+
amd64-debian-container:
<<: *container_job_definition
stage: containers-layer2
diff --git a/tests/docker/Makefile.include b/tests/docker/Makefile.include
index 8139e8467d4..079ceb6ff33 100644
--- a/tests/docker/Makefile.include
+++ b/tests/docker/Makefile.include
@@ -133,6 +133,7 @@ docker-image-travis: NOUSER=1
# Specialist build images, sometimes very limited tools
docker-image-debian-tricore-cross: docker-image-debian9
+docker-image-debian-all-test-cross: docker-image-debian10
docker-image-debian-arm64-test-cross: docker-image-debian11
# These images may be good enough for building tests but not for test builds
diff --git a/tests/docker/dockerfiles/debian-all-test-cross.docker b/tests/docker/dockerfiles/debian-all-test-cross.docker
new file mode 100644
index 00000000000..dedcea58b46
--- /dev/null
+++ b/tests/docker/dockerfiles/debian-all-test-cross.docker
@@ -0,0 +1,53 @@
+#
+# Docker all cross-compiler target (tests only)
+#
+# While the normal cross builds take care to setup proper multiarch
+# build environments which can cross build QEMU this just installs the
+# basic compilers for as many targets as possible. We shall use this
+# to build and run linux-user tests on GitLab
+#
+FROM qemu/debian10
+
+# What we need to build QEMU itself
+RUN apt update && \
+ DEBIAN_FRONTEND=noninteractive eatmydata \
+ apt build-dep -yy qemu
+
+# Add the foreign architecture we want and install dependencies
+RUN DEBIAN_FRONTEND=noninteractive eatmydata \
+ apt install -y --no-install-recommends \
+ gcc-aarch64-linux-gnu \
+ libc6-dev-arm64-cross \
+ gcc-alpha-linux-gnu \
+ libc6.1-dev-alpha-cross \
+ gcc-arm-linux-gnueabihf \
+ libc6-dev-armhf-cross \
+ gcc-hppa-linux-gnu \
+ libc6-dev-hppa-cross \
+ gcc-m68k-linux-gnu \
+ libc6-dev-m68k-cross \
+ gcc-mips-linux-gnu \
+ libc6-dev-mips-cross \
+ gcc-mips64-linux-gnuabi64 \
+ libc6-dev-mips64-cross \
+ gcc-mips64el-linux-gnuabi64 \
+ libc6-dev-mips64el-cross \
+ gcc-mipsel-linux-gnu \
+ libc6-dev-mipsel-cross \
+ gcc-powerpc-linux-gnu \
+ libc6-dev-powerpc-cross \
+ gcc-powerpc64-linux-gnu \
+ libc6-dev-ppc64-cross \
+ gcc-powerpc64le-linux-gnu \
+ libc6-dev-ppc64el-cross \
+ gcc-riscv64-linux-gnu \
+ libc6-dev-riscv64-cross \
+ gcc-s390x-linux-gnu \
+ libc6-dev-s390x-cross \
+ gcc-sh4-linux-gnu \
+ libc6-dev-sh4-cross \
+ gcc-sparc64-linux-gnu \
+ libc6-dev-sparc64-cross
+
+ENV QEMU_CONFIGURE_OPTS --disable-system --disable-docs --disable-tools
+ENV DEF_TARGET_LIST aarch64-linux-user,alpha-linux-user,arm-linux-user,hppa-linux-user,i386-linux-user,m68k-linux-user,mips-linux-user,mips64-linux-user,mips64el-linux-user,mipsel-linux-user,ppc-linux-user,ppc64-linux-user,ppc64le-linux-user,riscv64-linux-user,s390x-linux-user,sh4-linux-user,sparc64-linux-user
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 26/30] gitlab: enable check-tcg for linux-user tests
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (24 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 25/30] tests/docker: add a linux-user testing focused image Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-29 10:03 ` Philippe Mathieu-Daudé
` (2 more replies)
2020-06-26 18:13 ` [PATCH v3 27/30] gitlab: add avocado asset caching Alex Bennée
` (4 subsequent siblings)
30 siblings, 3 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, Thomas Huth, berrange, Alex Bennée, richard.henderson,
f4bug, Wainer dos Santos Moschetta, Philippe Mathieu-Daudé,
cota, aurelien
Switch to building in the new debian-all-test-cross image which has
most of the cross compilers inline.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
.gitlab-ci.yml | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 5ae8130bd1a..17c3349dd9e 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -140,10 +140,9 @@ build-tcg-disabled:
build-user:
<<: *native_build_job_definition
variables:
- IMAGE: ubuntu2004
- CONFIGURE_ARGS: --disable-system --disable-guest-agent
- --disable-capstone --disable-slirp --disable-fdt
- MAKE_CHECK_ARGS: run-tcg-tests-i386-linux-user run-tcg-tests-x86_64-linux-user
+ IMAGE: debian-all-test-cross
+ CONFIGURE_ARGS: --disable-tools --disable-system
+ MAKE_CHECK_ARGS: check-tcg
build-clang:
<<: *native_build_job_definition
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 27/30] gitlab: add avocado asset caching
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (25 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 26/30] gitlab: enable check-tcg for linux-user tests Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-29 12:25 ` Thomas Huth
2020-06-26 18:13 ` [PATCH v3 28/30] gitlab: split build-disabled into two phases Alex Bennée
` (3 subsequent siblings)
30 siblings, 1 reply; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, Thomas Huth, berrange, Alex Bennée, richard.henderson,
f4bug, Wainer dos Santos Moschetta, Philippe Mathieu-Daudé,
cota, aurelien
These can be quite big so lets cache them. I couldn't find any nots on
ccache in the gitlab docs so I've just ignored it for now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200622143204.12921-19-alex.bennee@linaro.org>
---
.gitlab-ci.yml | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index 17c3349dd9e..eb5b335c1e9 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -8,6 +8,12 @@ stages:
- build
- test
+# We assume GitLab has it's own caching set up for RPM/APT repositories so we
+# just take care of avocado assets here.
+cache:
+ paths:
+ - $HOME/avocado/data/cache
+
include:
- local: '/.gitlab-ci.d/edk2.yml'
- local: '/.gitlab-ci.d/opensbi.yml'
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 28/30] gitlab: split build-disabled into two phases
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (26 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 27/30] gitlab: add avocado asset caching Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-29 10:02 ` Philippe Mathieu-Daudé
2020-06-29 10:58 ` Thomas Huth
2020-06-26 18:13 ` [PATCH v3 29/30] gitlab: limit re-builds of the containers Alex Bennée
` (2 subsequent siblings)
30 siblings, 2 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, Thomas Huth, berrange, Alex Bennée, richard.henderson,
f4bug, Wainer dos Santos Moschetta, Philippe Mathieu-Daudé,
cota, aurelien
As we run check-qtest in "SLOW" mode this can timeout so split into
two jobs.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
.gitlab-ci.yml | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
index eb5b335c1e9..c6f1addc2f3 100644
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -110,7 +110,7 @@ check:system-fedora-alt:
IMAGE: fedora
MAKE_CHECK_ARGS: check-acceptance
-build-disabled:
+build:system-fedora-disabled:
<<: *native_build_job_definition
variables:
IMAGE: fedora
@@ -121,6 +121,17 @@ build-disabled:
--disable-qom-cast-debug --disable-spice --disable-vhost-vsock
--disable-vhost-net --disable-vhost-crypto --disable-vhost-user
TARGETS: i386-softmmu ppc64-softmmu mips64-softmmu i386-linux-user
+ artifacts:
+ paths:
+ - build
+
+qtest:system-fedora-disabled:
+ <<: *native_test_job_definition
+ needs:
+ - job: build:system-fedora-disabled
+ artifacts: true
+ variables:
+ IMAGE: fedora
MAKE_CHECK_ARGS: check-qtest SPEED=slow
build-tcg-disabled:
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 29/30] gitlab: limit re-builds of the containers
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (27 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 28/30] gitlab: split build-disabled into two phases Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-29 10:01 ` Philippe Mathieu-Daudé
2020-06-29 10:03 ` Daniel P. Berrangé
2020-06-26 18:13 ` [PATCH v3 30/30] containers.yml: build with docker.py tooling Alex Bennée
2020-06-26 19:13 ` [PATCH v3 00/30] testing/next (gitlab, vm, docker) no-reply
30 siblings, 2 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, berrange, Alex Bennée, richard.henderson, f4bug, cota,
aurelien
Most of the time we are just rebuilding the same things. We can skip
this although currently there is no mechanism for picking up new
distro releases.
Rather than try to be too fine grained allow any change to trigger all
the images being rebuilt.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
.gitlab-ci.d/containers.yml | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/.gitlab-ci.d/containers.yml b/.gitlab-ci.d/containers.yml
index 20b2fb1de5d..f56aa44f711 100644
--- a/.gitlab-ci.d/containers.yml
+++ b/.gitlab-ci.d/containers.yml
@@ -19,6 +19,10 @@
- docker push "$TAG"
after_script:
- docker logout
+ only:
+ changes:
+ - .gitlab-ci.d/containers.yml
+ - tests/docker/*
amd64-centos7-container:
<<: *container_job_definition
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* [PATCH v3 30/30] containers.yml: build with docker.py tooling
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (28 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 29/30] gitlab: limit re-builds of the containers Alex Bennée
@ 2020-06-26 18:13 ` Alex Bennée
2020-06-26 19:13 ` [PATCH v3 00/30] testing/next (gitlab, vm, docker) no-reply
30 siblings, 0 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-26 18:13 UTC (permalink / raw)
To: qemu-devel
Cc: fam, berrange, Alex Bennée, richard.henderson, f4bug, cota,
aurelien
Instead of building the docker files directly use the same docker.py
scripting as we do for building locally. This should help ensure we
use the exact same steps and allow us to cache properly when building
locally.
To get this working you have to have a fairly recent docker binary
otherwise you will see the error message:
=> ERROR importing cache manifest from registry.gitlab....
So far docker 19.03.12 works (from the docker apt repos) but 18.09.1,
build 4c52b90 which is packaged in Debian Buster fails.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
---
.gitlab-ci.d/containers.yml | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/.gitlab-ci.d/containers.yml b/.gitlab-ci.d/containers.yml
index f56aa44f711..e332af3cc46 100644
--- a/.gitlab-ci.d/containers.yml
+++ b/.gitlab-ci.d/containers.yml
@@ -8,14 +8,17 @@
before_script:
- export TAG="$CI_REGISTRY_IMAGE/qemu/$NAME:latest"
- export COMMON_TAG="$CI_REGISTRY/qemu-project/qemu/$NAME:latest"
+ - apk add python3
- docker info
- docker login registry.gitlab.com -u "$CI_REGISTRY_USER" -p "$CI_REGISTRY_PASSWORD"
script:
+ - echo "TAG:$TAG"
+ - echo "COMMON_TAG:$COMMON_TAG"
- docker pull "$TAG" || docker pull "$COMMON_TAG" || true
- - sed -i -e "s,FROM qemu/,FROM $CI_REGISTRY_IMAGE/qemu/," tests/docker/dockerfiles/$NAME.docker
- - DOCKER_BUILDKIT=1 docker build --cache-from "$TAG" --cache-from "$COMMON_TAG" --tag "$TAG"
- --build-arg BUILDKIT_INLINE_CACHE=1
- -f "tests/docker/dockerfiles/$NAME.docker" tests/docker/dockerfiles
+ - ./tests/docker/docker.py --engine docker build
+ -t "qemu:$NAME" -f "tests/docker/dockerfiles/$NAME.docker"
+ -r $CI_REGISTRY_IMAGE
+ - docker tag "qemu:$NAME" "$TAG"
- docker push "$TAG"
after_script:
- docker logout
--
2.20.1
^ permalink raw reply related [flat|nested] 60+ messages in thread
* Re: [PATCH v3 00/30] testing/next (gitlab, vm, docker)
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
` (29 preceding siblings ...)
2020-06-26 18:13 ` [PATCH v3 30/30] containers.yml: build with docker.py tooling Alex Bennée
@ 2020-06-26 19:13 ` no-reply
30 siblings, 0 replies; 60+ messages in thread
From: no-reply @ 2020-06-26 19:13 UTC (permalink / raw)
To: alex.bennee
Cc: fam, berrange, richard.henderson, qemu-devel, f4bug, cota,
alex.bennee, aurelien
Patchew URL: https://patchew.org/QEMU/20200626181357.26211-1-alex.bennee@linaro.org/
Hi,
This series failed the docker-mingw@fedora build test. Please find the testing commands and
their output below. If you have Docker installed, you can probably reproduce it
locally.
=== TEST SCRIPT BEGIN ===
#! /bin/bash
export ARCH=x86_64
make docker-image-fedora V=1 NETWORK=1
time make docker-test-mingw@fedora J=14 NETWORK=1
=== TEST SCRIPT END ===
Using default tag: latest
Trying to pull repository registry.gitlab.com/stsquad/qemu/qemu/fedora ...
Pulling repository registry.gitlab.com/stsquad/qemu/qemu/fedora
Error: image stsquad/qemu/qemu/fedora:latest not found
Sending build context to Docker daemon 4.096 kB
Step 1/9 : FROM fedora:32
---> 2a8d315e6208
---
perl-Encode-devel x86_64 4:3.06-445.fc32 updates 42 k
perl-Env noarch 1.04-440.fc32 fedora 19 k
perl-Errno x86_64 1.30-453.fc32 updates 24 k
perl-Error noarch 1:0.17029-1.fc32 fedora 42 k
perl-Exporter noarch 5.74-2.fc32 fedora 32 k
perl-Exporter-Tiny noarch 1.002001-5.fc32 fedora 51 k
perl-ExtUtils-CBuilder noarch 1:0.280234-2.fc32 fedora 47 k
---
(633/842): perl-Encode-Locale-1.05-15.fc32.noar 159 kB/s | 19 kB 00:00
(634/842): perl-Env-1.04-440.fc32.noarch.rpm 160 kB/s | 19 kB 00:00
(635/842): perl-Digest-SHA-6.02-442.fc32.x86_64 149 kB/s | 64 kB 00:00
(636/842): perl-Error-0.17029-1.fc32.noarch.rpm 201 kB/s | 42 kB 00:00
(637/842): perl-Exporter-5.74-2.fc32.noarch.rpm 152 kB/s | 32 kB 00:00
(638/842): perl-Exporter-Tiny-1.002001-5.fc32.n 182 kB/s | 51 kB 00:00
(639/842): perl-ExtUtils-CBuilder-0.280234-2.fc 149 kB/s | 47 kB 00:00
---
Installing : perl-DB_File-1.853-2.fc32.x86_64 233/856
Installing : perl-Devel-Size-0.83-5.fc32.x86_64 234/856
Installing : perl-Env-1.04-440.fc32.noarch 235/856
Installing : perl-Error-1:0.17029-1.fc32.noarch 236/856
Installing : perl-IPC-SysV-2.07-442.fc32.x86_64 237/856
Installing : perl-IPC-System-Simple-1.30-1.fc32.noarch 238/856
Installing : perl-autodie-2.32-2.fc32.noarch 239/856
---
Verifying : perl-Digest-SHA-1:6.02-442.fc32.x86_64 634/856
Verifying : perl-Encode-Locale-1.05-15.fc32.noarch 635/856
Verifying : perl-Env-1.04-440.fc32.noarch 636/856
Verifying : perl-Error-1:0.17029-1.fc32.noarch 637/856
Verifying : perl-Exporter-5.74-2.fc32.noarch 638/856
Verifying : perl-Exporter-Tiny-1.002001-5.fc32.noarch 639/856
Verifying : perl-ExtUtils-CBuilder-1:0.280234-2.fc32.noarch 640/856
---
perl-Encode-devel-4:3.06-445.fc32.x86_64
perl-Env-1.04-440.fc32.noarch
perl-Errno-1.30-453.fc32.x86_64
perl-Error-1:0.17029-1.fc32.noarch
perl-Exporter-5.74-2.fc32.noarch
perl-Exporter-Tiny-1.002001-5.fc32.noarch
perl-ExtUtils-CBuilder-1:0.280234-2.fc32.noarch
---
raise CalledProcessError(retcode, cmd)
subprocess.CalledProcessError: Command '['sudo', '-n', 'docker', 'run', '--label', 'com.qemu.instance.uuid=d630ec3f8c244b0a962bacd54db3f24e', '-u', '1001', '--security-opt', 'seccomp=unconfined', '--rm', '-e', 'TARGET_LIST=', '-e', 'EXTRA_CONFIGURE_OPTS=', '-e', 'V=', '-e', 'J=14', '-e', 'DEBUG=', '-e', 'SHOW_ENV=', '-e', 'CCACHE_DIR=/var/tmp/ccache', '-v', '/home/patchew/.cache/qemu-docker-ccache:/var/tmp/ccache:z', '-v', '/var/tmp/patchew-tester-tmp-daltld3f/src/docker-src.2020-06-26-15.04.20.25276:/var/tmp/qemu:z,ro', 'qemu/fedora', '/var/tmp/qemu/run', 'test-mingw']' returned non-zero exit status 2.
filter=--filter=label=com.qemu.instance.uuid=d630ec3f8c244b0a962bacd54db3f24e
make[1]: *** [docker-run] Error 1
make[1]: Leaving directory `/var/tmp/patchew-tester-tmp-daltld3f/src'
make: *** [docker-run-test-mingw@fedora] Error 2
real 9m48.635s
user 0m10.299s
The full log is available at
http://patchew.org/logs/20200626181357.26211-1-alex.bennee@linaro.org/testing.docker-mingw@fedora/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to patchew-devel@redhat.com
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 16/30] .gitignore: un-ignore .gitlab-ci.d
2020-06-26 18:13 ` [PATCH v3 16/30] .gitignore: un-ignore .gitlab-ci.d Alex Bennée
@ 2020-06-29 9:25 ` Thomas Huth
2020-06-29 10:04 ` Philippe Mathieu-Daudé
1 sibling, 0 replies; 60+ messages in thread
From: Thomas Huth @ 2020-06-29 9:25 UTC (permalink / raw)
To: Alex Bennée, qemu-devel
Cc: fam, berrange, richard.henderson, f4bug, cota, aurelien
On 26/06/2020 20.13, Alex Bennée wrote:
> The sooner we deprecate in-tree builds the sooner this mess of regexes
> can be thrown away.
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
>
> ---
> v2
> - just use explicit !/.gitlab-ci.d
> ---
> .gitignore | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/.gitignore b/.gitignore
> index 90acb4347d4..2992d15931a 100644
> --- a/.gitignore
> +++ b/.gitignore
> @@ -93,6 +93,7 @@
> *.tp
> *.vr
> *.d
> +!/.gitlab-ci.d
> !/scripts/qemu-guest-agent/fsfreeze-hook.d
> *.o
> .sdk
>
Reviewed-by: Thomas Huth <thuth@redhat.com>
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 19/30] gitlab: build all container images during CI
2020-06-26 18:13 ` [PATCH v3 19/30] gitlab: build all container images during CI Alex Bennée
@ 2020-06-29 9:54 ` Thomas Huth
0 siblings, 0 replies; 60+ messages in thread
From: Thomas Huth @ 2020-06-29 9:54 UTC (permalink / raw)
To: Alex Bennée, qemu-devel
Cc: fam, berrange, richard.henderson, f4bug,
Wainer dos Santos Moschetta, cota, Philippe Mathieu-Daudé,
aurelien
On 26/06/2020 20.13, Alex Bennée wrote:
> From: Daniel P. Berrangé <berrange@redhat.com>
>
> We have a number of container images in tests/docker/dockerfiles
> that are intended to provide well defined environments for doing
> test builds. We want our CI system to use these containers too.
>
> This introduces builds of all of them as the first stage in the
> CI, so that the built containers are available for later build
> jobs. The containers are setup to use the GitLab container
> registry as the cache, so we only pay the penalty of the full
> build when the dockerfiles change. The main qemu-project/qemu
> repo is used as a second cache, so that users forking QEMU will
> see a fast turnaround time on their CI jobs.
>
> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
> Message-Id: <20200622153318.751107-3-berrange@redhat.com>
> [AJB: tweak the tag format]
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> Acked-by: Thomas Huth <thuth@redhat.com>
> ---
> .gitlab-ci.d/containers.yml | 248 ++++++++++++++++++++++++++++++++++++
> .gitlab-ci.yml | 3 +
> 2 files changed, 251 insertions(+)
> create mode 100644 .gitlab-ci.d/containers.yml
>
> diff --git a/.gitlab-ci.d/containers.yml b/.gitlab-ci.d/containers.yml
> new file mode 100644
> index 00000000000..580439647ef
> --- /dev/null
> +++ b/.gitlab-ci.d/containers.yml
> @@ -0,0 +1,248 @@
> +
> +
Remove one or two empty lines here?
> +.container_job_template: &container_job_definition
> + image: docker:stable
> + stage: containers
> + services:
> + - docker:dind
> + before_script:
> + - export TAG="$CI_REGISTRY_IMAGE/qemu/$NAME:latest"
> + - export COMMON_TAG="$CI_REGISTRY/qemu-project/qemu/$NAME:latest"
> + - docker info
> + - docker login registry.gitlab.com -u "$CI_REGISTRY_USER" -p "$CI_REGISTRY_PASSWORD"
> + script:
> + - docker pull "$TAG" || docker pull "$COMMON_TAG" || true
> + - sed -i -e "s,FROM qemu/,FROM $CI_REGISTRY_IMAGE/qemu/," tests/docker/dockerfiles/$NAME.docker
> + - docker build --cache-from "$TAG" --cache-from "$COMMON_TAG" --tag "$TAG" -f "tests/docker/dockerfiles/$NAME.docker" tests/docker/dockerfiles
> + - docker push "$TAG"
> + after_script:
> + - docker logout
[...]
> +
> +amd64-ubuntu-container:
> + <<: *container_job_definition
> + variables:
> + NAME: ubuntu
> +
"git am" complains:
Applying: gitlab: build all container images during CI
.git/rebase-apply/patch:260: new blank line at EOF.
+
... thus remove the trailing empty line?
Thomas
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 29/30] gitlab: limit re-builds of the containers
2020-06-26 18:13 ` [PATCH v3 29/30] gitlab: limit re-builds of the containers Alex Bennée
@ 2020-06-29 10:01 ` Philippe Mathieu-Daudé
2020-06-29 10:03 ` Daniel P. Berrangé
1 sibling, 0 replies; 60+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-06-29 10:01 UTC (permalink / raw)
To: Alex Bennée, qemu-devel
Cc: fam, richard.henderson, cota, berrange, aurelien
On 6/26/20 8:13 PM, Alex Bennée wrote:
> Most of the time we are just rebuilding the same things. We can skip
> this although currently there is no mechanism for picking up new
> distro releases.
>
> Rather than try to be too fine grained allow any change to trigger all
> the images being rebuilt.
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> .gitlab-ci.d/containers.yml | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/.gitlab-ci.d/containers.yml b/.gitlab-ci.d/containers.yml
> index 20b2fb1de5d..f56aa44f711 100644
> --- a/.gitlab-ci.d/containers.yml
> +++ b/.gitlab-ci.d/containers.yml
> @@ -19,6 +19,10 @@
> - docker push "$TAG"
> after_script:
> - docker logout
> + only:
> + changes:
> + - .gitlab-ci.d/containers.yml
> + - tests/docker/*
>
> amd64-centos7-container:
> <<: *container_job_definition
>
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 28/30] gitlab: split build-disabled into two phases
2020-06-26 18:13 ` [PATCH v3 28/30] gitlab: split build-disabled into two phases Alex Bennée
@ 2020-06-29 10:02 ` Philippe Mathieu-Daudé
2020-06-29 10:58 ` Thomas Huth
1 sibling, 0 replies; 60+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-06-29 10:02 UTC (permalink / raw)
To: Alex Bennée, qemu-devel
Cc: fam, Thomas Huth, berrange, Philippe Mathieu-Daudé,
richard.henderson, Wainer dos Santos Moschetta, cota, aurelien
On 6/26/20 8:13 PM, Alex Bennée wrote:
> As we run check-qtest in "SLOW" mode this can timeout so split into
> two jobs.
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> .gitlab-ci.yml | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
> index eb5b335c1e9..c6f1addc2f3 100644
> --- a/.gitlab-ci.yml
> +++ b/.gitlab-ci.yml
> @@ -110,7 +110,7 @@ check:system-fedora-alt:
> IMAGE: fedora
> MAKE_CHECK_ARGS: check-acceptance
>
> -build-disabled:
> +build:system-fedora-disabled:
> <<: *native_build_job_definition
> variables:
> IMAGE: fedora
> @@ -121,6 +121,17 @@ build-disabled:
> --disable-qom-cast-debug --disable-spice --disable-vhost-vsock
> --disable-vhost-net --disable-vhost-crypto --disable-vhost-user
> TARGETS: i386-softmmu ppc64-softmmu mips64-softmmu i386-linux-user
> + artifacts:
> + paths:
> + - build
> +
> +qtest:system-fedora-disabled:
> + <<: *native_test_job_definition
> + needs:
> + - job: build:system-fedora-disabled
> + artifacts: true
> + variables:
> + IMAGE: fedora
> MAKE_CHECK_ARGS: check-qtest SPEED=slow
>
> build-tcg-disabled:
>
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 26/30] gitlab: enable check-tcg for linux-user tests
2020-06-26 18:13 ` [PATCH v3 26/30] gitlab: enable check-tcg for linux-user tests Alex Bennée
@ 2020-06-29 10:03 ` Philippe Mathieu-Daudé
2020-06-29 10:42 ` Thomas Huth
2020-06-29 11:03 ` Thomas Huth
2 siblings, 0 replies; 60+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-06-29 10:03 UTC (permalink / raw)
To: Alex Bennée, qemu-devel
Cc: fam, Thomas Huth, berrange, Philippe Mathieu-Daudé,
richard.henderson, Wainer dos Santos Moschetta, cota, aurelien
On 6/26/20 8:13 PM, Alex Bennée wrote:
> Switch to building in the new debian-all-test-cross image which has
> most of the cross compilers inline.
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> .gitlab-ci.yml | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
> index 5ae8130bd1a..17c3349dd9e 100644
> --- a/.gitlab-ci.yml
> +++ b/.gitlab-ci.yml
> @@ -140,10 +140,9 @@ build-tcg-disabled:
> build-user:
> <<: *native_build_job_definition
> variables:
> - IMAGE: ubuntu2004
> - CONFIGURE_ARGS: --disable-system --disable-guest-agent
> - --disable-capstone --disable-slirp --disable-fdt
> - MAKE_CHECK_ARGS: run-tcg-tests-i386-linux-user run-tcg-tests-x86_64-linux-user
> + IMAGE: debian-all-test-cross
> + CONFIGURE_ARGS: --disable-tools --disable-system
> + MAKE_CHECK_ARGS: check-tcg
>
> build-clang:
> <<: *native_build_job_definition
>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 29/30] gitlab: limit re-builds of the containers
2020-06-26 18:13 ` [PATCH v3 29/30] gitlab: limit re-builds of the containers Alex Bennée
2020-06-29 10:01 ` Philippe Mathieu-Daudé
@ 2020-06-29 10:03 ` Daniel P. Berrangé
2020-06-29 10:11 ` Alex Bennée
1 sibling, 1 reply; 60+ messages in thread
From: Daniel P. Berrangé @ 2020-06-29 10:03 UTC (permalink / raw)
To: Alex Bennée
Cc: fam, richard.henderson, qemu-devel, f4bug, cota, aurelien
On Fri, Jun 26, 2020 at 07:13:56PM +0100, Alex Bennée wrote:
> Most of the time we are just rebuilding the same things. We can skip
> this although currently there is no mechanism for picking up new
> distro releases.
>
> Rather than try to be too fine grained allow any change to trigger all
> the images being rebuilt.
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> .gitlab-ci.d/containers.yml | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/.gitlab-ci.d/containers.yml b/.gitlab-ci.d/containers.yml
> index 20b2fb1de5d..f56aa44f711 100644
> --- a/.gitlab-ci.d/containers.yml
> +++ b/.gitlab-ci.d/containers.yml
> @@ -19,6 +19,10 @@
> - docker push "$TAG"
> after_script:
> - docker logout
> + only:
> + changes:
> + - .gitlab-ci.d/containers.yml
> + - tests/docker/*
How does this work for a person who forks the QEMU git repo and pushes
a change which doesn't touch the containers.yml file ? AFAICT, all
their jobs will fail due to not having previously built any container
images in their brand new fork.
Regards,
Daniel
--
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org -o- https://fstop138.berrange.com :|
|: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 15/30] tests/docker: change tag naming scheme of our images
2020-06-26 18:13 ` [PATCH v3 15/30] tests/docker: change tag naming scheme of our images Alex Bennée
@ 2020-06-29 10:04 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 60+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-06-29 10:04 UTC (permalink / raw)
To: Alex Bennée, qemu-devel
Cc: fam, berrange, Philippe Mathieu-Daudé,
richard.henderson, cota, aurelien
On 6/26/20 8:13 PM, Alex Bennée wrote:
> We've been misusing the tag naming scheme for some time by overloading
> the post : section with the image type. Really it should be saved for
> the revision of that particular build. Move the details to the other
> side so we have:
>
> qemu/image-name
>
> with the implied :latest version added by the tooling.
>
> Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
>
> ---
> v2
> - fix RUN invocation as well
> - don't include :latest tag for debian-arm64-cross (implied)
> ---
> tests/docker/Makefile.include | 4 ++--
> tests/docker/docker.py | 2 +-
> tests/docker/dockerfiles/debian-alpha-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-amd64-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-amd64.docker | 2 +-
> tests/docker/dockerfiles/debian-arm64-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-arm64-test-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-armel-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-armhf-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-hppa-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-m68k-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-mips-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-mips64-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-mips64el-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-mipsel-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-powerpc-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-ppc64-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-ppc64el-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-riscv64-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-s390x-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-sh4-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-sparc64-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-tricore-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-win32-cross.docker | 2 +-
> tests/docker/dockerfiles/debian-win64-cross.docker | 2 +-
> tests/docker/dockerfiles/debian9-mxe.docker | 2 +-
> 26 files changed, 27 insertions(+), 27 deletions(-)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 16/30] .gitignore: un-ignore .gitlab-ci.d
2020-06-26 18:13 ` [PATCH v3 16/30] .gitignore: un-ignore .gitlab-ci.d Alex Bennée
2020-06-29 9:25 ` Thomas Huth
@ 2020-06-29 10:04 ` Philippe Mathieu-Daudé
1 sibling, 0 replies; 60+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-06-29 10:04 UTC (permalink / raw)
To: Alex Bennée, qemu-devel
Cc: fam, richard.henderson, cota, berrange, aurelien
On 6/26/20 8:13 PM, Alex Bennée wrote:
> The sooner we deprecate in-tree builds the sooner this mess of regexes
> can be thrown away.
:S
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
>
> ---
> v2
> - just use explicit !/.gitlab-ci.d
> ---
> .gitignore | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/.gitignore b/.gitignore
> index 90acb4347d4..2992d15931a 100644
> --- a/.gitignore
> +++ b/.gitignore
> @@ -93,6 +93,7 @@
> *.tp
> *.vr
> *.d
> +!/.gitlab-ci.d
> !/scripts/qemu-guest-agent/fsfreeze-hook.d
> *.o
> .sdk
>
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 09/30] tests/vm: change scripts to use self._config
2020-06-26 18:13 ` [PATCH v3 09/30] tests/vm: change scripts to use self._config Alex Bennée
@ 2020-06-29 10:06 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 60+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-06-29 10:06 UTC (permalink / raw)
To: Alex Bennée, qemu-devel
Cc: fam, berrange, Robert Foley, Philippe Mathieu-Daudé,
richard.henderson, cota, Peter Puhov, aurelien
On 6/26/20 8:13 PM, Alex Bennée wrote:
> From: Robert Foley <robert.foley@linaro.org>
>
> This change converts existing scripts to using for example self.ROOT_PASS,
> to self._config['root_pass'].
> We made similar changes for GUEST_USER, and GUEST_PASS.
> This allows us also to remove the change in basevm.py,
> which adds __getattr__ for backwards compatibility.
>
> Signed-off-by: Robert Foley <robert.foley@linaro.org>
> Reviewed-by: Peter Puhov <peter.puhov@linaro.org>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> Message-Id: <20200601211421.1277-8-robert.foley@linaro.org>
> ---
> tests/vm/basevm.py | 11 ++---------
> tests/vm/fedora | 17 +++++++++--------
> tests/vm/freebsd | 16 ++++++++--------
> tests/vm/netbsd | 19 ++++++++++---------
> tests/vm/openbsd | 17 +++++++++--------
> 5 files changed, 38 insertions(+), 42 deletions(-)
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 23/30] tests/docker: add packages needed for check-acceptance
2020-06-26 18:13 ` [PATCH v3 23/30] tests/docker: add packages needed for check-acceptance Alex Bennée
@ 2020-06-29 10:11 ` Philippe Mathieu-Daudé
2020-06-29 10:15 ` Thomas Huth
1 sibling, 0 replies; 60+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-06-29 10:11 UTC (permalink / raw)
To: Alex Bennée, qemu-devel
Cc: fam, berrange, Philippe Mathieu-Daudé,
richard.henderson, cota, aurelien
Hi Alex,
On 6/26/20 8:13 PM, Alex Bennée wrote:
> We need additional python packages to run check-acceptance. Add them
> to the docker images we will be using later.
I'm not sure everybody is interested by that. Maybe we could add an
extra 'acceptance-testing' Docker layer on top and use these images
when running acceptance tests.
Anyway this works so:
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> tests/docker/dockerfiles/fedora.docker | 7 +++++++
> tests/docker/dockerfiles/ubuntu2004.docker | 10 +++++++++-
> 2 files changed, 16 insertions(+), 1 deletion(-)
>
> diff --git a/tests/docker/dockerfiles/fedora.docker b/tests/docker/dockerfiles/fedora.docker
> index 798ddd2c3e0..70b6186bd3e 100644
> --- a/tests/docker/dockerfiles/fedora.docker
> +++ b/tests/docker/dockerfiles/fedora.docker
> @@ -80,7 +80,12 @@ ENV PACKAGES \
> pixman-devel \
> python3 \
> python3-PyYAML \
> + python3-numpy \
> + python3-opencv \
> + python3-pillow \
> + python3-pip \
> python3-sphinx \
> + python3-virtualenv \
> rdma-core-devel \
> SDL2-devel \
> snappy-devel \
> @@ -89,6 +94,8 @@ ENV PACKAGES \
> systemd-devel \
> systemtap-sdt-devel \
> tar \
> + tesseract \
> + tesseract-langpack-eng \
> texinfo \
> usbredir-devel \
> virglrenderer-devel \
> diff --git a/tests/docker/dockerfiles/ubuntu2004.docker b/tests/docker/dockerfiles/ubuntu2004.docker
> index 6050ce7e8a8..f7aac840bf8 100644
> --- a/tests/docker/dockerfiles/ubuntu2004.docker
> +++ b/tests/docker/dockerfiles/ubuntu2004.docker
> @@ -46,9 +46,17 @@ ENV PACKAGES flex bison \
> libxen-dev \
> libzstd-dev \
> make \
> - python3-yaml \
> + python3-numpy \
> + python3-opencv \
> + python3-pil \
> + python3-pip \
> python3-sphinx \
> + python3-venv \
> + python3-yaml \
> + rpm2cpio \
> sparse \
> + tesseract-ocr \
> + tesseract-ocr-eng \
> texinfo \
> xfslibs-dev\
> vim
>
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 29/30] gitlab: limit re-builds of the containers
2020-06-29 10:03 ` Daniel P. Berrangé
@ 2020-06-29 10:11 ` Alex Bennée
2020-06-29 11:42 ` Thomas Huth
0 siblings, 1 reply; 60+ messages in thread
From: Alex Bennée @ 2020-06-29 10:11 UTC (permalink / raw)
To: Daniel P. Berrangé
Cc: fam, richard.henderson, qemu-devel, f4bug, cota, aurelien
Daniel P. Berrangé <berrange@redhat.com> writes:
> On Fri, Jun 26, 2020 at 07:13:56PM +0100, Alex Bennée wrote:
>> Most of the time we are just rebuilding the same things. We can skip
>> this although currently there is no mechanism for picking up new
>> distro releases.
>>
>> Rather than try to be too fine grained allow any change to trigger all
>> the images being rebuilt.
>>
>> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
>> ---
>> .gitlab-ci.d/containers.yml | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/.gitlab-ci.d/containers.yml b/.gitlab-ci.d/containers.yml
>> index 20b2fb1de5d..f56aa44f711 100644
>> --- a/.gitlab-ci.d/containers.yml
>> +++ b/.gitlab-ci.d/containers.yml
>> @@ -19,6 +19,10 @@
>> - docker push "$TAG"
>> after_script:
>> - docker logout
>> + only:
>> + changes:
>> + - .gitlab-ci.d/containers.yml
>> + - tests/docker/*
>
> How does this work for a person who forks the QEMU git repo and pushes
> a change which doesn't touch the containers.yml file ? AFAICT, all
> their jobs will fail due to not having previously built any container
> images in their brand new fork.
Hmm what we really need is a condition check to see if there is a local
registry with images in it.
>
> Regards,
> Daniel
--
Alex Bennée
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 20/30] gitlab: convert jobs to use custom built containers
2020-06-26 18:13 ` [PATCH v3 20/30] gitlab: convert jobs to use custom built containers Alex Bennée
@ 2020-06-29 10:13 ` Thomas Huth
0 siblings, 0 replies; 60+ messages in thread
From: Thomas Huth @ 2020-06-29 10:13 UTC (permalink / raw)
To: Alex Bennée, qemu-devel
Cc: fam, berrange, richard.henderson, f4bug,
Wainer dos Santos Moschetta, cota, Philippe Mathieu-Daudé,
aurelien
On 26/06/2020 20.13, Alex Bennée wrote:
> From: Daniel P. Berrangé <berrange@redhat.com>
>
> Now that we're building standard container images from
> dockerfiles in tests/docker/dockerfiles, we can convert
> the build jobs to use them. The key benefit of this is
> that a contributor can now more easily replicate the CI
> environment on their local machine. The container images
> are cached too, so we are not spending time waiting for
> the apt-get/dnf package installs to complete.
>
> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
> Message-Id: <20200622153318.751107-4-berrange@redhat.com>
> [AJB: tweak naming convention]
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> .gitlab-ci.yml | 187 +++++++++++++++++++++----------------------------
> 1 file changed, 81 insertions(+), 106 deletions(-)
Acked-by: Thomas Huth <thuth@redhat.com>
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 23/30] tests/docker: add packages needed for check-acceptance
2020-06-26 18:13 ` [PATCH v3 23/30] tests/docker: add packages needed for check-acceptance Alex Bennée
2020-06-29 10:11 ` Philippe Mathieu-Daudé
@ 2020-06-29 10:15 ` Thomas Huth
1 sibling, 0 replies; 60+ messages in thread
From: Thomas Huth @ 2020-06-29 10:15 UTC (permalink / raw)
To: Alex Bennée, qemu-devel
Cc: fam, berrange, richard.henderson, f4bug, cota,
Philippe Mathieu-Daudé,
aurelien
On 26/06/2020 20.13, Alex Bennée wrote:
> We need additional python packages to run check-acceptance. Add them
> to the docker images we will be using later.
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> tests/docker/dockerfiles/fedora.docker | 7 +++++++
> tests/docker/dockerfiles/ubuntu2004.docker | 10 +++++++++-
> 2 files changed, 16 insertions(+), 1 deletion(-)
Reviewed-by: Thomas Huth <thuth@redhat.com>
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 24/30] gitlab: add acceptance testing to system builds
2020-06-26 18:13 ` [PATCH v3 24/30] gitlab: add acceptance testing to system builds Alex Bennée
@ 2020-06-29 10:15 ` Philippe Mathieu-Daudé
2020-06-29 10:36 ` Thomas Huth
2020-06-29 11:12 ` Thomas Huth
2 siblings, 0 replies; 60+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-06-29 10:15 UTC (permalink / raw)
To: Alex Bennée, qemu-devel
Cc: fam, Thomas Huth, berrange, Philippe Mathieu-Daudé,
richard.henderson, Wainer dos Santos Moschetta, cota, aurelien
Cc'ing Wainer
On 6/26/20 8:13 PM, Alex Bennée wrote:
> As part of migrating things from Travis to GitLab add the acceptance
> tests. To do this:
>
> - rename system1 to system-ubuntu-main
> - rename system2 to system-fedora-misc
> - split into build/check/acceptance
> - remove -j from check stages
> - use artifacts to save build stage
> - add post acceptance template and use
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> Message-Id: <20200622143204.12921-16-alex.bennee@linaro.org>
>
> ---
> v2
> - updated with danp's docker changes
> - use needs instead of dependancies
> - touch all the build files to prevent rebuild
> ---
> .gitlab-ci.yml | 66 +++++++++++++++++++++++++++++++++++++++++++++++---
> .travis.yml | 23 ------------------
> 2 files changed, 63 insertions(+), 26 deletions(-)
>
> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
> index a7abc55a5c6..5ae8130bd1a 100644
> --- a/.gitlab-ci.yml
> +++ b/.gitlab-ci.yml
> @@ -1,8 +1,12 @@
> +# Currently we have two build stages after our containers are built:
> +# - build (for traditional build and test or first stage build)
> +# - test (for test stages, using build artefacts from a build stage)
> stages:
> - containers
> - containers-layer2
> - containers-layer3
> - build
> + - test
>
> include:
> - local: '/.gitlab-ci.d/edk2.yml'
> @@ -24,26 +28,82 @@ include:
> ../configure --enable-werror $CONFIGURE_ARGS ;
> fi
> - make -j"$JOBS"
> - - make -j"$JOBS" $MAKE_CHECK_ARGS
> + - if test -n "$MAKE_CHECK_ARGS";
> + then
> + make $MAKE_CHECK_ARGS ;
> + fi
> +
> +.native_test_job_template: &native_test_job_definition
> + stage: test
> + image: $CI_REGISTRY_IMAGE/qemu/$IMAGE:latest
> + script:
> + - cd build
> + - find . -type f -exec touch {} +
> + - make $MAKE_CHECK_ARGS
> +
> +.post_acceptance_template: &post_acceptance
> + after_script:
> + - python3 -c 'import json; r = json.load(open("tests/results/latest/results.json")); [print(t["logfile"]) for t in r["tests"] if t["status"] not in ("PASS", "SKIP")]' | xargs cat
Wainer, I guess remember you said you'd send a script to do that
instead, right?
> + - du -chs $HOME/avocado/data/cache
>
> -build-system1:
> +build:system-ubuntu-main:
> <<: *native_build_job_definition
> variables:
> IMAGE: ubuntu2004
> TARGETS: aarch64-softmmu alpha-softmmu cris-softmmu hppa-softmmu lm32-softmmu
> moxie-softmmu microblazeel-softmmu mips64el-softmmu m68k-softmmu ppc-softmmu
> riscv64-softmmu sparc-softmmu
> + artifacts:
> + paths:
> + - build
> +
> +check:system-ubuntu-main:
> + <<: *native_test_job_definition
> + needs:
> + - job: build:system-ubuntu-main
> + artifacts: true
> + variables:
> + IMAGE: ubuntu2004
> MAKE_CHECK_ARGS: check
>
> -build-system2:
> +acceptance:system-ubuntu-main:
> + <<: *native_test_job_definition
> + needs:
> + - job: build:system-ubuntu-main
> + artifacts: true
> + variables:
> + IMAGE: ubuntu2004
(here I'd use ubuntu2004:acceptance)
> + MAKE_CHECK_ARGS: check-acceptance
> +
> +build:system-fedora-alt:
> <<: *native_build_job_definition
> variables:
> IMAGE: fedora
> TARGETS: tricore-softmmu unicore32-softmmu microblaze-softmmu mips-softmmu
> riscv32-softmmu s390x-softmmu sh4-softmmu sparc64-softmmu x86_64-softmmu
> xtensa-softmmu nios2-softmmu or1k-softmmu
> + artifacts:
> + paths:
> + - build
> +
> +check:system-fedora-alt:
> + <<: *native_test_job_definition
> + needs:
> + - job: build:system-fedora-alt
> + artifacts: true
> + variables:
> + IMAGE: fedora
> MAKE_CHECK_ARGS: check
>
> +check:system-fedora-alt:
> + <<: *native_test_job_definition
> + needs:
> + - job: build:system-fedora-alt
> + artifacts: true
> + variables:
> + IMAGE: fedora
(here I'd use fedora:acceptance)
> + MAKE_CHECK_ARGS: check-acceptance
> +
> build-disabled:
> <<: *native_build_job_definition
> variables:
> diff --git a/.travis.yml b/.travis.yml
> index 74158f741b1..c24dfbe377f 100644
> --- a/.travis.yml
> +++ b/.travis.yml
> @@ -289,29 +289,6 @@ jobs:
> python: 3.6
>
>
> - # Acceptance (Functional) tests
> - - name: "GCC check-acceptance"
> - dist: bionic
> - env:
> - - CONFIG="--enable-tools --target-list=aarch64-softmmu,alpha-softmmu,arm-softmmu,m68k-softmmu,microblaze-softmmu,mips-softmmu,mips64el-softmmu,nios2-softmmu,or1k-softmmu,ppc-softmmu,ppc64-softmmu,s390x-softmmu,sh4-softmmu,sparc-softmmu,x86_64-softmmu,xtensa-softmmu"
> - - TEST_CMD="make check-acceptance"
> - - CACHE_NAME="${TRAVIS_BRANCH}-linux-gcc-acceptance"
> - after_script:
> - - python3 -c 'import json; r = json.load(open("tests/results/latest/results.json")); [print(t["logfile"]) for t in r["tests"] if t["status"] not in ("PASS", "SKIP")]' | xargs cat
> - - du -chs $HOME/avocado/data/cache
> - addons:
> - apt:
> - packages:
> - - python3-pil
> - - python3-pip
> - - python3-numpy
> - - python3-opencv
> - - python3-venv
> - - rpm2cpio
> - - tesseract-ocr
> - - tesseract-ocr-eng
> -
> -
> # Using newer GCC with sanitizers
> - name: "GCC9 with sanitizers (softmmu)"
> addons:
>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 25/30] tests/docker: add a linux-user testing focused image
2020-06-26 18:13 ` [PATCH v3 25/30] tests/docker: add a linux-user testing focused image Alex Bennée
@ 2020-06-29 10:18 ` Philippe Mathieu-Daudé
0 siblings, 0 replies; 60+ messages in thread
From: Philippe Mathieu-Daudé @ 2020-06-29 10:18 UTC (permalink / raw)
To: Alex Bennée, qemu-devel
Cc: fam, berrange, Philippe Mathieu-Daudé,
richard.henderson, cota, aurelien
On 6/26/20 8:13 PM, Alex Bennée wrote:
> We happily use all the cross images for both cross-building QEMU as
> well as building the linux-user tests. However calling docker from
> within docker seems not to work. As we can build in Debian anyway why
> not include an image that has all the compilers available for
> non-docker invocation.
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> ---
> .gitlab-ci.d/containers.yml | 7 +++
> tests/docker/Makefile.include | 1 +
> .../dockerfiles/debian-all-test-cross.docker | 53 +++++++++++++++++++
> 3 files changed, 61 insertions(+)
> create mode 100644 tests/docker/dockerfiles/debian-all-test-cross.docker
>
> diff --git a/.gitlab-ci.d/containers.yml b/.gitlab-ci.d/containers.yml
> index ba9c24e98f1..20b2fb1de5d 100644
> --- a/.gitlab-ci.d/containers.yml
> +++ b/.gitlab-ci.d/containers.yml
> @@ -66,6 +66,13 @@ amd64-debian-cross-container:
> variables:
> NAME: debian-amd64-cross
>
> +amd64-debian-user-cross-container:
> + <<: *container_job_definition
> + stage: containers-layer2
> + needs: ['amd64-debian10-container']
> + variables:
> + NAME: debian-all-test-cross
> +
> amd64-debian-container:
> <<: *container_job_definition
> stage: containers-layer2
> diff --git a/tests/docker/Makefile.include b/tests/docker/Makefile.include
> index 8139e8467d4..079ceb6ff33 100644
> --- a/tests/docker/Makefile.include
> +++ b/tests/docker/Makefile.include
> @@ -133,6 +133,7 @@ docker-image-travis: NOUSER=1
>
> # Specialist build images, sometimes very limited tools
> docker-image-debian-tricore-cross: docker-image-debian9
> +docker-image-debian-all-test-cross: docker-image-debian10
> docker-image-debian-arm64-test-cross: docker-image-debian11
>
> # These images may be good enough for building tests but not for test builds
> diff --git a/tests/docker/dockerfiles/debian-all-test-cross.docker b/tests/docker/dockerfiles/debian-all-test-cross.docker
> new file mode 100644
> index 00000000000..dedcea58b46
> --- /dev/null
> +++ b/tests/docker/dockerfiles/debian-all-test-cross.docker
> @@ -0,0 +1,53 @@
> +#
> +# Docker all cross-compiler target (tests only)
> +#
> +# While the normal cross builds take care to setup proper multiarch
> +# build environments which can cross build QEMU this just installs the
> +# basic compilers for as many targets as possible. We shall use this
> +# to build and run linux-user tests on GitLab
> +#
> +FROM qemu/debian10
> +
> +# What we need to build QEMU itself
> +RUN apt update && \
> + DEBIAN_FRONTEND=noninteractive eatmydata \
> + apt build-dep -yy qemu
> +
> +# Add the foreign architecture we want and install dependencies
> +RUN DEBIAN_FRONTEND=noninteractive eatmydata \
> + apt install -y --no-install-recommends \
> + gcc-aarch64-linux-gnu \
> + libc6-dev-arm64-cross \
> + gcc-alpha-linux-gnu \
> + libc6.1-dev-alpha-cross \
> + gcc-arm-linux-gnueabihf \
> + libc6-dev-armhf-cross \
> + gcc-hppa-linux-gnu \
> + libc6-dev-hppa-cross \
> + gcc-m68k-linux-gnu \
> + libc6-dev-m68k-cross \
> + gcc-mips-linux-gnu \
> + libc6-dev-mips-cross \
> + gcc-mips64-linux-gnuabi64 \
> + libc6-dev-mips64-cross \
> + gcc-mips64el-linux-gnuabi64 \
> + libc6-dev-mips64el-cross \
> + gcc-mipsel-linux-gnu \
> + libc6-dev-mipsel-cross \
> + gcc-powerpc-linux-gnu \
> + libc6-dev-powerpc-cross \
> + gcc-powerpc64-linux-gnu \
> + libc6-dev-ppc64-cross \
> + gcc-powerpc64le-linux-gnu \
> + libc6-dev-ppc64el-cross \
> + gcc-riscv64-linux-gnu \
> + libc6-dev-riscv64-cross \
> + gcc-s390x-linux-gnu \
> + libc6-dev-s390x-cross \
> + gcc-sh4-linux-gnu \
> + libc6-dev-sh4-cross \
> + gcc-sparc64-linux-gnu \
> + libc6-dev-sparc64-cross
> +
> +ENV QEMU_CONFIGURE_OPTS --disable-system --disable-docs --disable-tools
> +ENV DEF_TARGET_LIST aarch64-linux-user,alpha-linux-user,arm-linux-user,hppa-linux-user,i386-linux-user,m68k-linux-user,mips-linux-user,mips64-linux-user,mips64el-linux-user,mipsel-linux-user,ppc-linux-user,ppc64-linux-user,ppc64le-linux-user,riscv64-linux-user,s390x-linux-user,sh4-linux-user,sparc64-linux-user
>
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 24/30] gitlab: add acceptance testing to system builds
2020-06-26 18:13 ` [PATCH v3 24/30] gitlab: add acceptance testing to system builds Alex Bennée
2020-06-29 10:15 ` Philippe Mathieu-Daudé
@ 2020-06-29 10:36 ` Thomas Huth
2020-06-29 12:51 ` Alex Bennée
2020-06-29 11:12 ` Thomas Huth
2 siblings, 1 reply; 60+ messages in thread
From: Thomas Huth @ 2020-06-29 10:36 UTC (permalink / raw)
To: Alex Bennée, qemu-devel
Cc: fam, Daniel P. Berrange, richard.henderson, f4bug,
Wainer dos Santos Moschetta, cota, Philippe Mathieu-Daudé,
aurelien
On 26/06/2020 20.13, Alex Bennée wrote:
> As part of migrating things from Travis to GitLab add the acceptance
> tests. To do this:
>
> - rename system1 to system-ubuntu-main
> - rename system2 to system-fedora-misc
> - split into build/check/acceptance
> - remove -j from check stages
> - use artifacts to save build stage
> - add post acceptance template and use
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> Message-Id: <20200622143204.12921-16-alex.bennee@linaro.org>
>
> ---
> v2
> - updated with danp's docker changes
> - use needs instead of dependancies
> - touch all the build files to prevent rebuild
> ---
> .gitlab-ci.yml | 66 +++++++++++++++++++++++++++++++++++++++++++++++---
> .travis.yml | 23 ------------------
> 2 files changed, 63 insertions(+), 26 deletions(-)
>
> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
> index a7abc55a5c6..5ae8130bd1a 100644
> --- a/.gitlab-ci.yml
> +++ b/.gitlab-ci.yml
> @@ -1,8 +1,12 @@
> +# Currently we have two build stages after our containers are built:
> +# - build (for traditional build and test or first stage build)
> +# - test (for test stages, using build artefacts from a build stage)
> stages:
> - containers
> - containers-layer2
> - containers-layer3
> - build
> + - test
>
> include:
> - local: '/.gitlab-ci.d/edk2.yml'
> @@ -24,26 +28,82 @@ include:
> ../configure --enable-werror $CONFIGURE_ARGS ;
> fi
> - make -j"$JOBS"
> - - make -j"$JOBS" $MAKE_CHECK_ARGS
> + - if test -n "$MAKE_CHECK_ARGS";
> + then
> + make $MAKE_CHECK_ARGS ;
> + fi
> +
> +.native_test_job_template: &native_test_job_definition
> + stage: test
> + image: $CI_REGISTRY_IMAGE/qemu/$IMAGE:latest
> + script:
> + - cd build
> + - find . -type f -exec touch {} +
> + - make $MAKE_CHECK_ARGS
> +
> +.post_acceptance_template: &post_acceptance
> + after_script:
> + - python3 -c 'import json; r = json.load(open("tests/results/latest/results.json")); [print(t["logfile"]) for t in r["tests"] if t["status"] not in ("PASS", "SKIP")]' | xargs cat
> + - du -chs $HOME/avocado/data/cache
>
> -build-system1:
> +build:system-ubuntu-main:
> <<: *native_build_job_definition
> variables:
> IMAGE: ubuntu2004
> TARGETS: aarch64-softmmu alpha-softmmu cris-softmmu hppa-softmmu lm32-softmmu
> moxie-softmmu microblazeel-softmmu mips64el-softmmu m68k-softmmu ppc-softmmu
> riscv64-softmmu sparc-softmmu
> + artifacts:
> + paths:
> + - build
> +
> +check:system-ubuntu-main:
> + <<: *native_test_job_definition
> + needs:
> + - job: build:system-ubuntu-main
> + artifacts: true
> + variables:
> + IMAGE: ubuntu2004
> MAKE_CHECK_ARGS: check
>
> -build-system2:
> +acceptance:system-ubuntu-main:
> + <<: *native_test_job_definition
> + needs:
> + - job: build:system-ubuntu-main
> + artifacts: true
> + variables:
> + IMAGE: ubuntu2004
> + MAKE_CHECK_ARGS: check-acceptance
> +
> +build:system-fedora-alt:
> <<: *native_build_job_definition
> variables:
> IMAGE: fedora
> TARGETS: tricore-softmmu unicore32-softmmu microblaze-softmmu mips-softmmu
> riscv32-softmmu s390x-softmmu sh4-softmmu sparc64-softmmu x86_64-softmmu
> xtensa-softmmu nios2-softmmu or1k-softmmu
> + artifacts:
> + paths:
> + - build
> +
> +check:system-fedora-alt:
> + <<: *native_test_job_definition
> + needs:
> + - job: build:system-fedora-alt
> + artifacts: true
> + variables:
> + IMAGE: fedora
> MAKE_CHECK_ARGS: check
>
> +check:system-fedora-alt:
> + <<: *native_test_job_definition
> + needs:
> + - job: build:system-fedora-alt
> + artifacts: true
> + variables:
> + IMAGE: fedora
> + MAKE_CHECK_ARGS: check-acceptance
Why is Ubuntu "-main" and "Fedora "-alt" ? ... that does not make sense
to me.
We also might want to rework the list of targets. To speed up the
testing, I originally omitted some targets like sh4eb-softmmu which did
not seem very interesting, but now that we add more and more builds in
parallel, we could maybe split the two system targets into three or even
four instead, and then add these targets, too. It would also be nice to
have some tests with "centos8" and a debian container, too.
And "rx-softmmu" is also still missing in the target list.
Ok, it's quite a bit of change that still needs to be done here ...
maybe that's rather something for a separate patch later.
Thomas
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 26/30] gitlab: enable check-tcg for linux-user tests
2020-06-26 18:13 ` [PATCH v3 26/30] gitlab: enable check-tcg for linux-user tests Alex Bennée
2020-06-29 10:03 ` Philippe Mathieu-Daudé
@ 2020-06-29 10:42 ` Thomas Huth
2020-06-29 11:03 ` Thomas Huth
2 siblings, 0 replies; 60+ messages in thread
From: Thomas Huth @ 2020-06-29 10:42 UTC (permalink / raw)
To: Alex Bennée, qemu-devel
Cc: fam, berrange, richard.henderson, f4bug,
Wainer dos Santos Moschetta, cota, Philippe Mathieu-Daudé,
aurelien
On 26/06/2020 20.13, Alex Bennée wrote:
> Switch to building in the new debian-all-test-cross image which has
> most of the cross compilers inline.
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> .gitlab-ci.yml | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
> index 5ae8130bd1a..17c3349dd9e 100644
> --- a/.gitlab-ci.yml
> +++ b/.gitlab-ci.yml
> @@ -140,10 +140,9 @@ build-tcg-disabled:
> build-user:
> <<: *native_build_job_definition
> variables:
> - IMAGE: ubuntu2004
> - CONFIGURE_ARGS: --disable-system --disable-guest-agent
> - --disable-capstone --disable-slirp --disable-fdt
> - MAKE_CHECK_ARGS: run-tcg-tests-i386-linux-user run-tcg-tests-x86_64-linux-user
> + IMAGE: debian-all-test-cross
> + CONFIGURE_ARGS: --disable-tools --disable-system
> + MAKE_CHECK_ARGS: check-tcg
>
> build-clang:
> <<: *native_build_job_definition
>
Reviewed-by: Thomas Huth <thuth@redhat.com>
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 28/30] gitlab: split build-disabled into two phases
2020-06-26 18:13 ` [PATCH v3 28/30] gitlab: split build-disabled into two phases Alex Bennée
2020-06-29 10:02 ` Philippe Mathieu-Daudé
@ 2020-06-29 10:58 ` Thomas Huth
2020-06-29 12:57 ` Alex Bennée
1 sibling, 1 reply; 60+ messages in thread
From: Thomas Huth @ 2020-06-29 10:58 UTC (permalink / raw)
To: Alex Bennée, qemu-devel
Cc: fam, berrange, richard.henderson, f4bug,
Wainer dos Santos Moschetta, cota, Philippe Mathieu-Daudé,
aurelien
On 26/06/2020 20.13, Alex Bennée wrote:
> As we run check-qtest in "SLOW" mode this can timeout so split into
> two jobs.
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> .gitlab-ci.yml | 13 ++++++++++++-
> 1 file changed, 12 insertions(+), 1 deletion(-)
>
> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
> index eb5b335c1e9..c6f1addc2f3 100644
> --- a/.gitlab-ci.yml
> +++ b/.gitlab-ci.yml
> @@ -110,7 +110,7 @@ check:system-fedora-alt:
> IMAGE: fedora
> MAKE_CHECK_ARGS: check-acceptance
>
> -build-disabled:
> +build:system-fedora-disabled:
> <<: *native_build_job_definition
> variables:
> IMAGE: fedora
> @@ -121,6 +121,17 @@ build-disabled:
> --disable-qom-cast-debug --disable-spice --disable-vhost-vsock
> --disable-vhost-net --disable-vhost-crypto --disable-vhost-user
> TARGETS: i386-softmmu ppc64-softmmu mips64-softmmu i386-linux-user
> + artifacts:
> + paths:
> + - build
> +
> +qtest:system-fedora-disabled:
> + <<: *native_test_job_definition
> + needs:
> + - job: build:system-fedora-disabled
> + artifacts: true
> + variables:
> + IMAGE: fedora
> MAKE_CHECK_ARGS: check-qtest SPEED=slow
Reviewed-by: Thomas Huth <thuth@redhat.com>
I still wonder why the test got slower in the recent weeks ... and maybe
we should also change the target list now that the test runs in a
separate stage? ... well, I guess that's also something for later ...
Thomas
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 26/30] gitlab: enable check-tcg for linux-user tests
2020-06-26 18:13 ` [PATCH v3 26/30] gitlab: enable check-tcg for linux-user tests Alex Bennée
2020-06-29 10:03 ` Philippe Mathieu-Daudé
2020-06-29 10:42 ` Thomas Huth
@ 2020-06-29 11:03 ` Thomas Huth
2020-06-29 11:35 ` Laurent Vivier
2020-06-29 12:54 ` Alex Bennée
2 siblings, 2 replies; 60+ messages in thread
From: Thomas Huth @ 2020-06-29 11:03 UTC (permalink / raw)
To: Alex Bennée, qemu-devel
Cc: fam, Laurent Vivier, berrange, richard.henderson, f4bug,
Wainer dos Santos Moschetta, cota, qemu-arm,
Philippe Mathieu-Daudé,
aurelien
On 26/06/2020 20.13, Alex Bennée wrote:
> Switch to building in the new debian-all-test-cross image which has
> most of the cross compilers inline.
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> ---
> .gitlab-ci.yml | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
> index 5ae8130bd1a..17c3349dd9e 100644
> --- a/.gitlab-ci.yml
> +++ b/.gitlab-ci.yml
> @@ -140,10 +140,9 @@ build-tcg-disabled:
> build-user:
> <<: *native_build_job_definition
> variables:
> - IMAGE: ubuntu2004
> - CONFIGURE_ARGS: --disable-system --disable-guest-agent
> - --disable-capstone --disable-slirp --disable-fdt
> - MAKE_CHECK_ARGS: run-tcg-tests-i386-linux-user run-tcg-tests-x86_64-linux-user
> + IMAGE: debian-all-test-cross
> + CONFIGURE_ARGS: --disable-tools --disable-system
> + MAKE_CHECK_ARGS: check-tcg
The pipeline is failing for me now:
https://gitlab.com/huth/qemu/-/jobs/615345144#L2654
qemu-arm: /builds/huth/qemu/linux-user/elfload.c:2321: pgb_reserved_va:
Assertion `addr == test' failed.
Is that a known bug already?
Thomas
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 24/30] gitlab: add acceptance testing to system builds
2020-06-26 18:13 ` [PATCH v3 24/30] gitlab: add acceptance testing to system builds Alex Bennée
2020-06-29 10:15 ` Philippe Mathieu-Daudé
2020-06-29 10:36 ` Thomas Huth
@ 2020-06-29 11:12 ` Thomas Huth
2 siblings, 0 replies; 60+ messages in thread
From: Thomas Huth @ 2020-06-29 11:12 UTC (permalink / raw)
To: Alex Bennée, qemu-devel
Cc: fam, berrange, richard.henderson, f4bug,
Wainer dos Santos Moschetta, cota, Philippe Mathieu-Daudé,
aurelien
On 26/06/2020 20.13, Alex Bennée wrote:
> As part of migrating things from Travis to GitLab add the acceptance
> tests. To do this:
>
> - rename system1 to system-ubuntu-main
> - rename system2 to system-fedora-misc
> - split into build/check/acceptance
> - remove -j from check stages
> - use artifacts to save build stage
> - add post acceptance template and use
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> Message-Id: <20200622143204.12921-16-alex.bennee@linaro.org>
>
> ---
> v2
> - updated with danp's docker changes
> - use needs instead of dependancies
> - touch all the build files to prevent rebuild
> ---
> .gitlab-ci.yml | 66 +++++++++++++++++++++++++++++++++++++++++++++++---
> .travis.yml | 23 ------------------
> 2 files changed, 63 insertions(+), 26 deletions(-)
>
> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
> index a7abc55a5c6..5ae8130bd1a 100644
> --- a/.gitlab-ci.yml
> +++ b/.gitlab-ci.yml
> @@ -1,8 +1,12 @@
> +# Currently we have two build stages after our containers are built:
> +# - build (for traditional build and test or first stage build)
> +# - test (for test stages, using build artefacts from a build stage)
> stages:
> - containers
> - containers-layer2
> - containers-layer3
> - build
> + - test
>
> include:
> - local: '/.gitlab-ci.d/edk2.yml'
> @@ -24,26 +28,82 @@ include:
> ../configure --enable-werror $CONFIGURE_ARGS ;
> fi
> - make -j"$JOBS"
> - - make -j"$JOBS" $MAKE_CHECK_ARGS
> + - if test -n "$MAKE_CHECK_ARGS";
> + then
> + make $MAKE_CHECK_ARGS ;
> + fi
> +
> +.native_test_job_template: &native_test_job_definition
> + stage: test
> + image: $CI_REGISTRY_IMAGE/qemu/$IMAGE:latest
> + script:
> + - cd build
> + - find . -type f -exec touch {} +
> + - make $MAKE_CHECK_ARGS
> +
> +.post_acceptance_template: &post_acceptance
> + after_script:
> + - python3 -c 'import json; r = json.load(open("tests/results/latest/results.json")); [print(t["logfile"]) for t in r["tests"] if t["status"] not in ("PASS", "SKIP")]' | xargs cat
> + - du -chs $HOME/avocado/data/cache
>
> -build-system1:
> +build:system-ubuntu-main:
> <<: *native_build_job_definition
> variables:
> IMAGE: ubuntu2004
> TARGETS: aarch64-softmmu alpha-softmmu cris-softmmu hppa-softmmu lm32-softmmu
> moxie-softmmu microblazeel-softmmu mips64el-softmmu m68k-softmmu ppc-softmmu
> riscv64-softmmu sparc-softmmu
> + artifacts:
> + paths:
> + - build
> +
> +check:system-ubuntu-main:
> + <<: *native_test_job_definition
> + needs:
> + - job: build:system-ubuntu-main
> + artifacts: true
> + variables:
> + IMAGE: ubuntu2004
> MAKE_CHECK_ARGS: check
>
> -build-system2:
> +acceptance:system-ubuntu-main:
> + <<: *native_test_job_definition
> + needs:
> + - job: build:system-ubuntu-main
> + artifacts: true
> + variables:
> + IMAGE: ubuntu2004
> + MAKE_CHECK_ARGS: check-acceptance
> +
> +build:system-fedora-alt:
> <<: *native_build_job_definition
> variables:
> IMAGE: fedora
> TARGETS: tricore-softmmu unicore32-softmmu microblaze-softmmu mips-softmmu
> riscv32-softmmu s390x-softmmu sh4-softmmu sparc64-softmmu x86_64-softmmu
> xtensa-softmmu nios2-softmmu or1k-softmmu
> + artifacts:
> + paths:
> + - build
> +
> +check:system-fedora-alt:
> + <<: *native_test_job_definition
> + needs:
> + - job: build:system-fedora-alt
> + artifacts: true
> + variables:
> + IMAGE: fedora
> MAKE_CHECK_ARGS: check
>
> +check:system-fedora-alt:
Copy-n-paste bug: This should be "acceptance:..." instead. By the way, I
think the use of a colon after "check" or "acceptance" is a little bit
confusing here, since this is also a character used by the YML syntax.
Could you name the jobs with a dash here instead? (check-system-fedora,
acceptance-system-fedora, ...)
> + <<: *native_test_job_definition
> + needs:
> + - job: build:system-fedora-alt
> + artifacts: true
> + variables:
> + IMAGE: fedora
> + MAKE_CHECK_ARGS: check-acceptance
Thomas
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 26/30] gitlab: enable check-tcg for linux-user tests
2020-06-29 11:03 ` Thomas Huth
@ 2020-06-29 11:35 ` Laurent Vivier
2020-06-29 12:54 ` Alex Bennée
1 sibling, 0 replies; 60+ messages in thread
From: Laurent Vivier @ 2020-06-29 11:35 UTC (permalink / raw)
To: Thomas Huth, Alex Bennée, qemu-devel
Cc: fam, berrange, richard.henderson, f4bug,
Wainer dos Santos Moschetta, cota, qemu-arm,
Philippe Mathieu-Daudé,
aurelien
On 29/06/2020 13:03, Thomas Huth wrote:
> On 26/06/2020 20.13, Alex Bennée wrote:
>> Switch to building in the new debian-all-test-cross image which has
>> most of the cross compilers inline.
>>
>> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
>> ---
>> .gitlab-ci.yml | 7 +++----
>> 1 file changed, 3 insertions(+), 4 deletions(-)
>>
>> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
>> index 5ae8130bd1a..17c3349dd9e 100644
>> --- a/.gitlab-ci.yml
>> +++ b/.gitlab-ci.yml
>> @@ -140,10 +140,9 @@ build-tcg-disabled:
>> build-user:
>> <<: *native_build_job_definition
>> variables:
>> - IMAGE: ubuntu2004
>> - CONFIGURE_ARGS: --disable-system --disable-guest-agent
>> - --disable-capstone --disable-slirp --disable-fdt
>> - MAKE_CHECK_ARGS: run-tcg-tests-i386-linux-user
>> run-tcg-tests-x86_64-linux-user
>> + IMAGE: debian-all-test-cross
>> + CONFIGURE_ARGS: --disable-tools --disable-system
>> + MAKE_CHECK_ARGS: check-tcg
>
> The pipeline is failing for me now:
>
> https://gitlab.com/huth/qemu/-/jobs/615345144#L2654
>
> qemu-arm: /builds/huth/qemu/linux-user/elfload.c:2321: pgb_reserved_va:
> Assertion `addr == test' failed.
>
Never seen, but perhaps it has been introduced by the latest series from
Alex that modifies elfload.c?
Thanks,
Laurent
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 29/30] gitlab: limit re-builds of the containers
2020-06-29 10:11 ` Alex Bennée
@ 2020-06-29 11:42 ` Thomas Huth
2020-06-29 11:52 ` Daniel P. Berrangé
0 siblings, 1 reply; 60+ messages in thread
From: Thomas Huth @ 2020-06-29 11:42 UTC (permalink / raw)
To: Alex Bennée, Daniel P. Berrangé
Cc: fam, richard.henderson, qemu-devel, f4bug, cota, aurelien
On 29/06/2020 12.11, Alex Bennée wrote:
>
> Daniel P. Berrangé <berrange@redhat.com> writes:
>
>> On Fri, Jun 26, 2020 at 07:13:56PM +0100, Alex Bennée wrote:
>>> Most of the time we are just rebuilding the same things. We can skip
>>> this although currently there is no mechanism for picking up new
>>> distro releases.
>>>
>>> Rather than try to be too fine grained allow any change to trigger all
>>> the images being rebuilt.
>>>
>>> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
>>> ---
>>> .gitlab-ci.d/containers.yml | 4 ++++
>>> 1 file changed, 4 insertions(+)
>>>
>>> diff --git a/.gitlab-ci.d/containers.yml b/.gitlab-ci.d/containers.yml
>>> index 20b2fb1de5d..f56aa44f711 100644
>>> --- a/.gitlab-ci.d/containers.yml
>>> +++ b/.gitlab-ci.d/containers.yml
>>> @@ -19,6 +19,10 @@
>>> - docker push "$TAG"
>>> after_script:
>>> - docker logout
>>> + only:
>>> + changes:
>>> + - .gitlab-ci.d/containers.yml
>>> + - tests/docker/*
>>
>> How does this work for a person who forks the QEMU git repo and pushes
>> a change which doesn't touch the containers.yml file ? AFAICT, all
>> their jobs will fail due to not having previously built any container
>> images in their brand new fork.
>
> Hmm what we really need is a condition check to see if there is a local
> registry with images in it.
Maybe it would be good enough to do something like this instead:
rules:
- if: '$CI_COMMIT_BRANCH == "master"'
- changes:
- .gitlab-ci.d/containers.yml
- tests/docker/*
... so that the pipeline is certainly run the first time when the master
branch gets initialized? (I did not try it out, just had the idea after
looking at the gitlab CI docs)
Thomas
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 29/30] gitlab: limit re-builds of the containers
2020-06-29 11:42 ` Thomas Huth
@ 2020-06-29 11:52 ` Daniel P. Berrangé
0 siblings, 0 replies; 60+ messages in thread
From: Daniel P. Berrangé @ 2020-06-29 11:52 UTC (permalink / raw)
To: Thomas Huth
Cc: fam, richard.henderson, qemu-devel, f4bug, cota,
Alex Bennée, aurelien
On Mon, Jun 29, 2020 at 01:42:19PM +0200, Thomas Huth wrote:
> On 29/06/2020 12.11, Alex Bennée wrote:
> >
> > Daniel P. Berrangé <berrange@redhat.com> writes:
> >
> > > On Fri, Jun 26, 2020 at 07:13:56PM +0100, Alex Bennée wrote:
> > > > Most of the time we are just rebuilding the same things. We can skip
> > > > this although currently there is no mechanism for picking up new
> > > > distro releases.
> > > >
> > > > Rather than try to be too fine grained allow any change to trigger all
> > > > the images being rebuilt.
> > > >
> > > > Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> > > > ---
> > > > .gitlab-ci.d/containers.yml | 4 ++++
> > > > 1 file changed, 4 insertions(+)
> > > >
> > > > diff --git a/.gitlab-ci.d/containers.yml b/.gitlab-ci.d/containers.yml
> > > > index 20b2fb1de5d..f56aa44f711 100644
> > > > --- a/.gitlab-ci.d/containers.yml
> > > > +++ b/.gitlab-ci.d/containers.yml
> > > > @@ -19,6 +19,10 @@
> > > > - docker push "$TAG"
> > > > after_script:
> > > > - docker logout
> > > > + only:
> > > > + changes:
> > > > + - .gitlab-ci.d/containers.yml
> > > > + - tests/docker/*
> > >
> > > How does this work for a person who forks the QEMU git repo and pushes
> > > a change which doesn't touch the containers.yml file ? AFAICT, all
> > > their jobs will fail due to not having previously built any container
> > > images in their brand new fork.
> >
> > Hmm what we really need is a condition check to see if there is a local
> > registry with images in it.
>
> Maybe it would be good enough to do something like this instead:
>
> rules:
> - if: '$CI_COMMIT_BRANCH == "master"'
> - changes:
> - .gitlab-ci.d/containers.yml
> - tests/docker/*
>
> ... so that the pipeline is certainly run the first time when the master
> branch gets initialized? (I did not try it out, just had the idea after
> looking at the gitlab CI docs)
IIUC, the rules: can only reduce scenarios where a job is run, vs the
baseline config. AFAIK, forking a repo doesn't cause any jobs to be
run, so adding extra rules: can't make that happen.
Regards,
Daniel
--
|: https://berrange.com -o- https://www.flickr.com/photos/dberrange :|
|: https://libvirt.org -o- https://fstop138.berrange.com :|
|: https://entangle-photo.org -o- https://www.instagram.com/dberrange :|
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 27/30] gitlab: add avocado asset caching
2020-06-26 18:13 ` [PATCH v3 27/30] gitlab: add avocado asset caching Alex Bennée
@ 2020-06-29 12:25 ` Thomas Huth
0 siblings, 0 replies; 60+ messages in thread
From: Thomas Huth @ 2020-06-29 12:25 UTC (permalink / raw)
To: Alex Bennée, qemu-devel
Cc: fam, berrange, richard.henderson, f4bug,
Wainer dos Santos Moschetta, cota, Philippe Mathieu-Daudé,
aurelien
On 26/06/2020 20.13, Alex Bennée wrote:
> These can be quite big so lets cache them. I couldn't find any nots on
> ccache in the gitlab docs so I've just ignored it for now.
>
> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> Message-Id: <20200622143204.12921-19-alex.bennee@linaro.org>
> ---
> .gitlab-ci.yml | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
> index 17c3349dd9e..eb5b335c1e9 100644
> --- a/.gitlab-ci.yml
> +++ b/.gitlab-ci.yml
> @@ -8,6 +8,12 @@ stages:
> - build
> - test
>
> +# We assume GitLab has it's own caching set up for RPM/APT repositories so we
> +# just take care of avocado assets here.
> +cache:
> + paths:
> + - $HOME/avocado/data/cache
The test assets are not cached yet, in a second run I still got a lot of
"Fetching asset from tests/acceptance/..." messages:
https://gitlab.com/huth/qemu/-/jobs/615526057#L148
Could these also be chached?
Thomas
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 24/30] gitlab: add acceptance testing to system builds
2020-06-29 10:36 ` Thomas Huth
@ 2020-06-29 12:51 ` Alex Bennée
0 siblings, 0 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-29 12:51 UTC (permalink / raw)
To: Thomas Huth
Cc: fam, Daniel P. Berrange, richard.henderson, qemu-devel,
Wainer dos Santos Moschetta, f4bug, cota,
Philippe Mathieu-Daudé,
aurelien
Thomas Huth <thuth@redhat.com> writes:
> On 26/06/2020 20.13, Alex Bennée wrote:
>> As part of migrating things from Travis to GitLab add the acceptance
>> tests. To do this:
>>
>> - rename system1 to system-ubuntu-main
>> - rename system2 to system-fedora-misc
>> - split into build/check/acceptance
>> - remove -j from check stages
>> - use artifacts to save build stage
>> - add post acceptance template and use
>>
>> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
>> Message-Id: <20200622143204.12921-16-alex.bennee@linaro.org>
>>
>> ---
>> v2
>> - updated with danp's docker changes
>> - use needs instead of dependancies
>> - touch all the build files to prevent rebuild
>> ---
>> .gitlab-ci.yml | 66 +++++++++++++++++++++++++++++++++++++++++++++++---
>> .travis.yml | 23 ------------------
>> 2 files changed, 63 insertions(+), 26 deletions(-)
>>
>> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
>> index a7abc55a5c6..5ae8130bd1a 100644
>> --- a/.gitlab-ci.yml
>> +++ b/.gitlab-ci.yml
>> @@ -1,8 +1,12 @@
>> +# Currently we have two build stages after our containers are built:
>> +# - build (for traditional build and test or first stage build)
>> +# - test (for test stages, using build artefacts from a build stage)
>> stages:
>> - containers
>> - containers-layer2
>> - containers-layer3
>> - build
>> + - test
>>
>> include:
>> - local: '/.gitlab-ci.d/edk2.yml'
>> @@ -24,26 +28,82 @@ include:
>> ../configure --enable-werror $CONFIGURE_ARGS ;
>> fi
>> - make -j"$JOBS"
>> - - make -j"$JOBS" $MAKE_CHECK_ARGS
>> + - if test -n "$MAKE_CHECK_ARGS";
>> + then
>> + make $MAKE_CHECK_ARGS ;
>> + fi
>> +
>> +.native_test_job_template: &native_test_job_definition
>> + stage: test
>> + image: $CI_REGISTRY_IMAGE/qemu/$IMAGE:latest
>> + script:
>> + - cd build
>> + - find . -type f -exec touch {} +
>> + - make $MAKE_CHECK_ARGS
>> +
>> +.post_acceptance_template: &post_acceptance
>> + after_script:
>> + - python3 -c 'import json; r = json.load(open("tests/results/latest/results.json")); [print(t["logfile"]) for t in r["tests"] if t["status"] not in ("PASS", "SKIP")]' | xargs cat
>> + - du -chs $HOME/avocado/data/cache
>>
>> -build-system1:
>> +build:system-ubuntu-main:
>> <<: *native_build_job_definition
>> variables:
>> IMAGE: ubuntu2004
>> TARGETS: aarch64-softmmu alpha-softmmu cris-softmmu hppa-softmmu lm32-softmmu
>> moxie-softmmu microblazeel-softmmu mips64el-softmmu m68k-softmmu ppc-softmmu
>> riscv64-softmmu sparc-softmmu
>> + artifacts:
>> + paths:
>> + - build
>> +
>> +check:system-ubuntu-main:
>> + <<: *native_test_job_definition
>> + needs:
>> + - job: build:system-ubuntu-main
>> + artifacts: true
>> + variables:
>> + IMAGE: ubuntu2004
>> MAKE_CHECK_ARGS: check
>>
>> -build-system2:
>> +acceptance:system-ubuntu-main:
>> + <<: *native_test_job_definition
>> + needs:
>> + - job: build:system-ubuntu-main
>> + artifacts: true
>> + variables:
>> + IMAGE: ubuntu2004
>> + MAKE_CHECK_ARGS: check-acceptance
>> +
>> +build:system-fedora-alt:
>> <<: *native_build_job_definition
>> variables:
>> IMAGE: fedora
>> TARGETS: tricore-softmmu unicore32-softmmu microblaze-softmmu mips-softmmu
>> riscv32-softmmu s390x-softmmu sh4-softmmu sparc64-softmmu x86_64-softmmu
>> xtensa-softmmu nios2-softmmu or1k-softmmu
>> + artifacts:
>> + paths:
>> + - build
>> +
>> +check:system-fedora-alt:
>> + <<: *native_test_job_definition
>> + needs:
>> + - job: build:system-fedora-alt
>> + artifacts: true
>> + variables:
>> + IMAGE: fedora
>> MAKE_CHECK_ARGS: check
>>
>> +check:system-fedora-alt:
>> + <<: *native_test_job_definition
>> + needs:
>> + - job: build:system-fedora-alt
>> + artifacts: true
>> + variables:
>> + IMAGE: fedora
>> + MAKE_CHECK_ARGS: check-acceptance
>
> Why is Ubuntu "-main" and "Fedora "-alt" ? ... that does not make sense
> to me.
In a previous revision I had one do MAIN_SOFTMMU_TARGETS and therefor
the other was the alternate ones.
> We also might want to rework the list of targets. To speed up the
> testing, I originally omitted some targets like sh4eb-softmmu which did
> not seem very interesting, but now that we add more and more builds in
> parallel, we could maybe split the two system targets into three or even
> four instead, and then add these targets, too. It would also be nice to
> have some tests with "centos8" and a debian container, too.
>
> And "rx-softmmu" is also still missing in the target list.
>
> Ok, it's quite a bit of change that still needs to be done here ...
> maybe that's rather something for a separate patch later.
It's getting tricky with --target-list and target-list-exclude because
the run times are getting quite long although the splitting helps.
>
> Thomas
--
Alex Bennée
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 26/30] gitlab: enable check-tcg for linux-user tests
2020-06-29 11:03 ` Thomas Huth
2020-06-29 11:35 ` Laurent Vivier
@ 2020-06-29 12:54 ` Alex Bennée
1 sibling, 0 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-29 12:54 UTC (permalink / raw)
To: Thomas Huth
Cc: fam, Laurent Vivier, berrange, richard.henderson, qemu-devel,
Wainer dos Santos Moschetta, f4bug, cota, qemu-arm,
Philippe Mathieu-Daudé,
aurelien
Thomas Huth <thuth@redhat.com> writes:
> On 26/06/2020 20.13, Alex Bennée wrote:
>> Switch to building in the new debian-all-test-cross image which has
>> most of the cross compilers inline.
>>
>> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
>> ---
>> .gitlab-ci.yml | 7 +++----
>> 1 file changed, 3 insertions(+), 4 deletions(-)
>>
>> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
>> index 5ae8130bd1a..17c3349dd9e 100644
>> --- a/.gitlab-ci.yml
>> +++ b/.gitlab-ci.yml
>> @@ -140,10 +140,9 @@ build-tcg-disabled:
>> build-user:
>> <<: *native_build_job_definition
>> variables:
>> - IMAGE: ubuntu2004
>> - CONFIGURE_ARGS: --disable-system --disable-guest-agent
>> - --disable-capstone --disable-slirp --disable-fdt
>> - MAKE_CHECK_ARGS: run-tcg-tests-i386-linux-user run-tcg-tests-x86_64-linux-user
>> + IMAGE: debian-all-test-cross
>> + CONFIGURE_ARGS: --disable-tools --disable-system
>> + MAKE_CHECK_ARGS: check-tcg
>
> The pipeline is failing for me now:
>
> https://gitlab.com/huth/qemu/-/jobs/615345144#L2654
>
> qemu-arm: /builds/huth/qemu/linux-user/elfload.c:2321: pgb_reserved_va:
> Assertion `addr == test' failed.
>
> Is that a known bug already?
Yes - that's one of the problems that seems to be a unique failure on
GitLab's infrastructure.
>
> Thomas
--
Alex Bennée
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 28/30] gitlab: split build-disabled into two phases
2020-06-29 10:58 ` Thomas Huth
@ 2020-06-29 12:57 ` Alex Bennée
0 siblings, 0 replies; 60+ messages in thread
From: Alex Bennée @ 2020-06-29 12:57 UTC (permalink / raw)
To: Thomas Huth
Cc: fam, berrange, richard.henderson, qemu-devel,
Wainer dos Santos Moschetta, f4bug, cota,
Philippe Mathieu-Daudé,
aurelien
Thomas Huth <thuth@redhat.com> writes:
> On 26/06/2020 20.13, Alex Bennée wrote:
>> As we run check-qtest in "SLOW" mode this can timeout so split into
>> two jobs.
>>
>> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
>> ---
>> .gitlab-ci.yml | 13 ++++++++++++-
>> 1 file changed, 12 insertions(+), 1 deletion(-)
>>
>> diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml
>> index eb5b335c1e9..c6f1addc2f3 100644
>> --- a/.gitlab-ci.yml
>> +++ b/.gitlab-ci.yml
>> @@ -110,7 +110,7 @@ check:system-fedora-alt:
>> IMAGE: fedora
>> MAKE_CHECK_ARGS: check-acceptance
>>
>> -build-disabled:
>> +build:system-fedora-disabled:
>> <<: *native_build_job_definition
>> variables:
>> IMAGE: fedora
>> @@ -121,6 +121,17 @@ build-disabled:
>> --disable-qom-cast-debug --disable-spice --disable-vhost-vsock
>> --disable-vhost-net --disable-vhost-crypto --disable-vhost-user
>> TARGETS: i386-softmmu ppc64-softmmu mips64-softmmu i386-linux-user
>> + artifacts:
>> + paths:
>> + - build
>> +
>> +qtest:system-fedora-disabled:
>> + <<: *native_test_job_definition
>> + needs:
>> + - job: build:system-fedora-disabled
>> + artifacts: true
>> + variables:
>> + IMAGE: fedora
>> MAKE_CHECK_ARGS: check-qtest SPEED=slow
>
> Reviewed-by: Thomas Huth <thuth@redhat.com>
>
> I still wonder why the test got slower in the recent weeks ... and maybe
> we should also change the target list now that the test runs in a
> separate stage? ... well, I guess that's also something for later ...
s390x acceptance tests seem to be running a lot slower than they did on
Travis. I can't believe it's just a difference in core speed of the VM.
--
Alex Bennée
^ permalink raw reply [flat|nested] 60+ messages in thread
* Re: [PATCH v3 17/30] gitlab-ci: Fix the change rules after moving the YML files
2020-06-26 18:13 ` [PATCH v3 17/30] gitlab-ci: Fix the change rules after moving the YML files Alex Bennée
@ 2020-07-02 7:42 ` Laszlo Ersek
0 siblings, 0 replies; 60+ messages in thread
From: Laszlo Ersek @ 2020-07-02 7:42 UTC (permalink / raw)
To: Alex Bennée, qemu-devel
Cc: fam, Thomas Huth, berrange, Philippe Mathieu-Daudé,
richard.henderson, f4bug, cota, aurelien
On 06/26/20 20:13, Alex Bennée wrote:
> From: Thomas Huth <thuth@redhat.com>
>
> The edk2.yml and opensbi.yml files have recently been moved/renamed,
> but the change has not been reflected in the rules in the YML files
> yet.
>
> Fixes: 922febe2af ("Move edk2 and opensbi YAML files to .gitlab-ci.d folder")
> Signed-off-by: Thomas Huth <thuth@redhat.com>
> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
> Message-Id: <20200625151627.24986-1-thuth@redhat.com>
> ---
> .gitlab-ci.d/edk2.yml | 2 +-
> .gitlab-ci.d/opensbi.yml | 2 +-
> 2 files changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/.gitlab-ci.d/edk2.yml b/.gitlab-ci.d/edk2.yml
> index 088ba4b43a3..a9990b71475 100644
> --- a/.gitlab-ci.d/edk2.yml
> +++ b/.gitlab-ci.d/edk2.yml
> @@ -2,7 +2,7 @@ docker-edk2:
> stage: build
> rules: # Only run this job when the Dockerfile is modified
> - changes:
> - - .gitlab-ci-edk2.yml
> + - .gitlab-ci.d/edk2.yml
> - .gitlab-ci.d/edk2/Dockerfile
> when: always
> image: docker:19.03.1
> diff --git a/.gitlab-ci.d/opensbi.yml b/.gitlab-ci.d/opensbi.yml
> index dd051c01245..6a1750784ac 100644
> --- a/.gitlab-ci.d/opensbi.yml
> +++ b/.gitlab-ci.d/opensbi.yml
> @@ -2,7 +2,7 @@ docker-opensbi:
> stage: build
> rules: # Only run this job when the Dockerfile is modified
> - changes:
> - - .gitlab-ci-opensbi.yml
> + - .gitlab-ci.d/opensbi.yml
> - .gitlab-ci.d/opensbi/Dockerfile
> when: always
> image: docker:19.03.1
>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
^ permalink raw reply [flat|nested] 60+ messages in thread
end of thread, other threads:[~2020-07-02 7:43 UTC | newest]
Thread overview: 60+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-26 18:13 [PATCH v3 00/30] testing/next (gitlab, vm, docker) Alex Bennée
2020-06-26 18:13 ` [PATCH v3 01/30] iotests: Fix 051 output after qdev_init_nofail() removal Alex Bennée
2020-06-26 18:13 ` [PATCH v3 02/30] crypto/linux_keyring: fix 'secret_keyring' configure test Alex Bennée
2020-06-26 18:13 ` [PATCH v3 03/30] tests/vm: pass args through to BaseVM's __init__ Alex Bennée
2020-06-26 18:13 ` [PATCH v3 04/30] tests/vm: Add configuration to basevm.py Alex Bennée
2020-06-26 18:13 ` [PATCH v3 05/30] tests/vm: Added configuration file support Alex Bennée
2020-06-26 18:13 ` [PATCH v3 06/30] tests/vm: Add common Ubuntu python module Alex Bennée
2020-06-26 18:13 ` [PATCH v3 07/30] tests/vm: Added a new script for ubuntu.aarch64 Alex Bennée
2020-06-26 18:13 ` [PATCH v3 08/30] tests/vm: Added a new script for centos.aarch64 Alex Bennée
2020-06-26 18:13 ` [PATCH v3 09/30] tests/vm: change scripts to use self._config Alex Bennée
2020-06-29 10:06 ` Philippe Mathieu-Daudé
2020-06-26 18:13 ` [PATCH v3 10/30] python/qemu: Add ConsoleSocket for optional use in QEMUMachine Alex Bennée
2020-06-26 18:13 ` [PATCH v3 11/30] tests/vm: Add workaround to consume console Alex Bennée
2020-06-26 18:13 ` [PATCH v3 12/30] tests/vm: switch from optsparse to argparse Alex Bennée
2020-06-26 18:13 ` [PATCH v3 13/30] tests/vm: allow us to take advantage of MTTCG Alex Bennée
2020-06-26 18:13 ` [PATCH v3 14/30] tests/docker: check for an parameters not empty string Alex Bennée
2020-06-26 18:13 ` [PATCH v3 15/30] tests/docker: change tag naming scheme of our images Alex Bennée
2020-06-29 10:04 ` Philippe Mathieu-Daudé
2020-06-26 18:13 ` [PATCH v3 16/30] .gitignore: un-ignore .gitlab-ci.d Alex Bennée
2020-06-29 9:25 ` Thomas Huth
2020-06-29 10:04 ` Philippe Mathieu-Daudé
2020-06-26 18:13 ` [PATCH v3 17/30] gitlab-ci: Fix the change rules after moving the YML files Alex Bennée
2020-07-02 7:42 ` Laszlo Ersek
2020-06-26 18:13 ` [PATCH v3 18/30] gitlab: introduce explicit "container" and "build" stages Alex Bennée
2020-06-26 18:13 ` [PATCH v3 19/30] gitlab: build all container images during CI Alex Bennée
2020-06-29 9:54 ` Thomas Huth
2020-06-26 18:13 ` [PATCH v3 20/30] gitlab: convert jobs to use custom built containers Alex Bennée
2020-06-29 10:13 ` Thomas Huth
2020-06-26 18:13 ` [PATCH v3 21/30] gitlab: build containers with buildkit and metadata Alex Bennée
2020-06-26 18:13 ` [PATCH v3 22/30] tests/docker: add --registry support to tooling Alex Bennée
2020-06-26 18:13 ` [PATCH v3 23/30] tests/docker: add packages needed for check-acceptance Alex Bennée
2020-06-29 10:11 ` Philippe Mathieu-Daudé
2020-06-29 10:15 ` Thomas Huth
2020-06-26 18:13 ` [PATCH v3 24/30] gitlab: add acceptance testing to system builds Alex Bennée
2020-06-29 10:15 ` Philippe Mathieu-Daudé
2020-06-29 10:36 ` Thomas Huth
2020-06-29 12:51 ` Alex Bennée
2020-06-29 11:12 ` Thomas Huth
2020-06-26 18:13 ` [PATCH v3 25/30] tests/docker: add a linux-user testing focused image Alex Bennée
2020-06-29 10:18 ` Philippe Mathieu-Daudé
2020-06-26 18:13 ` [PATCH v3 26/30] gitlab: enable check-tcg for linux-user tests Alex Bennée
2020-06-29 10:03 ` Philippe Mathieu-Daudé
2020-06-29 10:42 ` Thomas Huth
2020-06-29 11:03 ` Thomas Huth
2020-06-29 11:35 ` Laurent Vivier
2020-06-29 12:54 ` Alex Bennée
2020-06-26 18:13 ` [PATCH v3 27/30] gitlab: add avocado asset caching Alex Bennée
2020-06-29 12:25 ` Thomas Huth
2020-06-26 18:13 ` [PATCH v3 28/30] gitlab: split build-disabled into two phases Alex Bennée
2020-06-29 10:02 ` Philippe Mathieu-Daudé
2020-06-29 10:58 ` Thomas Huth
2020-06-29 12:57 ` Alex Bennée
2020-06-26 18:13 ` [PATCH v3 29/30] gitlab: limit re-builds of the containers Alex Bennée
2020-06-29 10:01 ` Philippe Mathieu-Daudé
2020-06-29 10:03 ` Daniel P. Berrangé
2020-06-29 10:11 ` Alex Bennée
2020-06-29 11:42 ` Thomas Huth
2020-06-29 11:52 ` Daniel P. Berrangé
2020-06-26 18:13 ` [PATCH v3 30/30] containers.yml: build with docker.py tooling Alex Bennée
2020-06-26 19:13 ` [PATCH v3 00/30] testing/next (gitlab, vm, docker) no-reply
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.