All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH v2 0/3] powerpc/pseries: IPI doorbell improvements
@ 2020-06-30 11:50 ` Nicholas Piggin
  0 siblings, 0 replies; 12+ messages in thread
From: Nicholas Piggin @ 2020-06-30 11:50 UTC (permalink / raw)
  To: linuxppc-dev
  Cc: kvm-ppc, Nicholas Piggin, Paul Mackerras, Cédric Le Goater,
	Anton Blanchard, David Gibson

Since v1:
- Fixed SMP compile error.
- Fixed EPAPR / KVM_GUEST breakage.
- Expanded patch 3 changelog a bit.

Thanks,
Nick

Nicholas Piggin (3):
  powerpc: inline doorbell sending functions
  powerpc/pseries: Use doorbells even if XIVE is available
  powerpc/pseries: Add KVM guest doorbell restrictions

 arch/powerpc/include/asm/dbell.h     | 63 ++++++++++++++++++++++++++--
 arch/powerpc/include/asm/firmware.h  |  6 +++
 arch/powerpc/include/asm/kvm_para.h  | 26 ++----------
 arch/powerpc/kernel/Makefile         |  5 +--
 arch/powerpc/kernel/dbell.c          | 55 ------------------------
 arch/powerpc/kernel/firmware.c       | 19 +++++++++
 arch/powerpc/platforms/pseries/smp.c | 62 +++++++++++++++++++--------
 7 files changed, 134 insertions(+), 102 deletions(-)

-- 
2.23.0


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v2 0/3] powerpc/pseries: IPI doorbell improvements
@ 2020-06-30 11:50 ` Nicholas Piggin
  0 siblings, 0 replies; 12+ messages in thread
From: Nicholas Piggin @ 2020-06-30 11:50 UTC (permalink / raw)
  To: linuxppc-dev
  Cc: kvm-ppc, Nicholas Piggin, Paul Mackerras, Cédric Le Goater,
	Anton Blanchard, David Gibson

Since v1:
- Fixed SMP compile error.
- Fixed EPAPR / KVM_GUEST breakage.
- Expanded patch 3 changelog a bit.

Thanks,
Nick

Nicholas Piggin (3):
  powerpc: inline doorbell sending functions
  powerpc/pseries: Use doorbells even if XIVE is available
  powerpc/pseries: Add KVM guest doorbell restrictions

 arch/powerpc/include/asm/dbell.h     | 63 ++++++++++++++++++++++++++--
 arch/powerpc/include/asm/firmware.h  |  6 +++
 arch/powerpc/include/asm/kvm_para.h  | 26 ++----------
 arch/powerpc/kernel/Makefile         |  5 +--
 arch/powerpc/kernel/dbell.c          | 55 ------------------------
 arch/powerpc/kernel/firmware.c       | 19 +++++++++
 arch/powerpc/platforms/pseries/smp.c | 62 +++++++++++++++++++--------
 7 files changed, 134 insertions(+), 102 deletions(-)

-- 
2.23.0

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH v2 1/3] powerpc: inline doorbell sending functions
  2020-06-30 11:50 ` Nicholas Piggin
@ 2020-06-30 11:50   ` Nicholas Piggin
  -1 siblings, 0 replies; 12+ messages in thread
From: Nicholas Piggin @ 2020-06-30 11:50 UTC (permalink / raw)
  To: linuxppc-dev
  Cc: kvm-ppc, Nicholas Piggin, Paul Mackerras, Cédric Le Goater,
	Anton Blanchard, David Gibson

These are only called in one place for a given platform, so inline them
for performance.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/include/asm/dbell.h | 63 ++++++++++++++++++++++++++++++--
 arch/powerpc/kernel/dbell.c      | 55 ----------------------------
 2 files changed, 60 insertions(+), 58 deletions(-)

diff --git a/arch/powerpc/include/asm/dbell.h b/arch/powerpc/include/asm/dbell.h
index 4ce6808deed3..f19d2282e3f8 100644
--- a/arch/powerpc/include/asm/dbell.h
+++ b/arch/powerpc/include/asm/dbell.h
@@ -13,6 +13,7 @@
 
 #include <asm/ppc-opcode.h>
 #include <asm/feature-fixups.h>
+#include <asm/kvm_ppc.h>
 
 #define PPC_DBELL_MSG_BRDCAST	(0x04000000)
 #define PPC_DBELL_TYPE(x)	(((x) & 0xf) << (63-36))
@@ -87,9 +88,6 @@ static inline void ppc_msgsync(void)
 
 #endif /* CONFIG_PPC_BOOK3S */
 
-extern void doorbell_global_ipi(int cpu);
-extern void doorbell_core_ipi(int cpu);
-extern int doorbell_try_core_ipi(int cpu);
 extern void doorbell_exception(struct pt_regs *regs);
 
 static inline void ppc_msgsnd(enum ppc_dbell type, u32 flags, u32 tag)
@@ -100,4 +98,63 @@ static inline void ppc_msgsnd(enum ppc_dbell type, u32 flags, u32 tag)
 	_ppc_msgsnd(msg);
 }
 
+#ifdef CONFIG_SMP
+
+/*
+ * Doorbells must only be used if CPU_FTR_DBELL is available.
+ * msgsnd is used in HV, and msgsndp is used in !HV.
+ *
+ * These should be used by platform code that is aware of restrictions.
+ * Other arch code should use ->cause_ipi.
+ *
+ * doorbell_global_ipi() sends a dbell to any target CPU.
+ * Must be used only by architectures that address msgsnd target
+ * by PIR/get_hard_smp_processor_id.
+ */
+static inline void doorbell_global_ipi(int cpu)
+{
+	u32 tag = get_hard_smp_processor_id(cpu);
+
+	kvmppc_set_host_ipi(cpu);
+	/* Order previous accesses vs. msgsnd, which is treated as a store */
+	ppc_msgsnd_sync();
+	ppc_msgsnd(PPC_DBELL_MSGTYPE, 0, tag);
+}
+
+/*
+ * doorbell_core_ipi() sends a dbell to a target CPU in the same core.
+ * Must be used only by architectures that address msgsnd target
+ * by TIR/cpu_thread_in_core.
+ */
+static inline void doorbell_core_ipi(int cpu)
+{
+	u32 tag = cpu_thread_in_core(cpu);
+
+	kvmppc_set_host_ipi(cpu);
+	/* Order previous accesses vs. msgsnd, which is treated as a store */
+	ppc_msgsnd_sync();
+	ppc_msgsnd(PPC_DBELL_MSGTYPE, 0, tag);
+}
+
+/*
+ * Attempt to cause a core doorbell if destination is on the same core.
+ * Returns 1 on success, 0 on failure.
+ */
+static inline int doorbell_try_core_ipi(int cpu)
+{
+	int this_cpu = get_cpu();
+	int ret = 0;
+
+	if (cpumask_test_cpu(cpu, cpu_sibling_mask(this_cpu))) {
+		doorbell_core_ipi(cpu);
+		ret = 1;
+	}
+
+	put_cpu();
+
+	return ret;
+}
+
+#endif /* CONFIG_SMP */
+
 #endif /* _ASM_POWERPC_DBELL_H */
diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c
index f17ff1200eaa..52680cf07c9d 100644
--- a/arch/powerpc/kernel/dbell.c
+++ b/arch/powerpc/kernel/dbell.c
@@ -18,61 +18,6 @@
 
 #ifdef CONFIG_SMP
 
-/*
- * Doorbells must only be used if CPU_FTR_DBELL is available.
- * msgsnd is used in HV, and msgsndp is used in !HV.
- *
- * These should be used by platform code that is aware of restrictions.
- * Other arch code should use ->cause_ipi.
- *
- * doorbell_global_ipi() sends a dbell to any target CPU.
- * Must be used only by architectures that address msgsnd target
- * by PIR/get_hard_smp_processor_id.
- */
-void doorbell_global_ipi(int cpu)
-{
-	u32 tag = get_hard_smp_processor_id(cpu);
-
-	kvmppc_set_host_ipi(cpu);
-	/* Order previous accesses vs. msgsnd, which is treated as a store */
-	ppc_msgsnd_sync();
-	ppc_msgsnd(PPC_DBELL_MSGTYPE, 0, tag);
-}
-
-/*
- * doorbell_core_ipi() sends a dbell to a target CPU in the same core.
- * Must be used only by architectures that address msgsnd target
- * by TIR/cpu_thread_in_core.
- */
-void doorbell_core_ipi(int cpu)
-{
-	u32 tag = cpu_thread_in_core(cpu);
-
-	kvmppc_set_host_ipi(cpu);
-	/* Order previous accesses vs. msgsnd, which is treated as a store */
-	ppc_msgsnd_sync();
-	ppc_msgsnd(PPC_DBELL_MSGTYPE, 0, tag);
-}
-
-/*
- * Attempt to cause a core doorbell if destination is on the same core.
- * Returns 1 on success, 0 on failure.
- */
-int doorbell_try_core_ipi(int cpu)
-{
-	int this_cpu = get_cpu();
-	int ret = 0;
-
-	if (cpumask_test_cpu(cpu, cpu_sibling_mask(this_cpu))) {
-		doorbell_core_ipi(cpu);
-		ret = 1;
-	}
-
-	put_cpu();
-
-	return ret;
-}
-
 void doorbell_exception(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
-- 
2.23.0


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v2 1/3] powerpc: inline doorbell sending functions
@ 2020-06-30 11:50   ` Nicholas Piggin
  0 siblings, 0 replies; 12+ messages in thread
From: Nicholas Piggin @ 2020-06-30 11:50 UTC (permalink / raw)
  To: linuxppc-dev
  Cc: kvm-ppc, Nicholas Piggin, Paul Mackerras, Cédric Le Goater,
	Anton Blanchard, David Gibson

These are only called in one place for a given platform, so inline them
for performance.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/include/asm/dbell.h | 63 ++++++++++++++++++++++++++++++--
 arch/powerpc/kernel/dbell.c      | 55 ----------------------------
 2 files changed, 60 insertions(+), 58 deletions(-)

diff --git a/arch/powerpc/include/asm/dbell.h b/arch/powerpc/include/asm/dbell.h
index 4ce6808deed3..f19d2282e3f8 100644
--- a/arch/powerpc/include/asm/dbell.h
+++ b/arch/powerpc/include/asm/dbell.h
@@ -13,6 +13,7 @@
 
 #include <asm/ppc-opcode.h>
 #include <asm/feature-fixups.h>
+#include <asm/kvm_ppc.h>
 
 #define PPC_DBELL_MSG_BRDCAST	(0x04000000)
 #define PPC_DBELL_TYPE(x)	(((x) & 0xf) << (63-36))
@@ -87,9 +88,6 @@ static inline void ppc_msgsync(void)
 
 #endif /* CONFIG_PPC_BOOK3S */
 
-extern void doorbell_global_ipi(int cpu);
-extern void doorbell_core_ipi(int cpu);
-extern int doorbell_try_core_ipi(int cpu);
 extern void doorbell_exception(struct pt_regs *regs);
 
 static inline void ppc_msgsnd(enum ppc_dbell type, u32 flags, u32 tag)
@@ -100,4 +98,63 @@ static inline void ppc_msgsnd(enum ppc_dbell type, u32 flags, u32 tag)
 	_ppc_msgsnd(msg);
 }
 
+#ifdef CONFIG_SMP
+
+/*
+ * Doorbells must only be used if CPU_FTR_DBELL is available.
+ * msgsnd is used in HV, and msgsndp is used in !HV.
+ *
+ * These should be used by platform code that is aware of restrictions.
+ * Other arch code should use ->cause_ipi.
+ *
+ * doorbell_global_ipi() sends a dbell to any target CPU.
+ * Must be used only by architectures that address msgsnd target
+ * by PIR/get_hard_smp_processor_id.
+ */
+static inline void doorbell_global_ipi(int cpu)
+{
+	u32 tag = get_hard_smp_processor_id(cpu);
+
+	kvmppc_set_host_ipi(cpu);
+	/* Order previous accesses vs. msgsnd, which is treated as a store */
+	ppc_msgsnd_sync();
+	ppc_msgsnd(PPC_DBELL_MSGTYPE, 0, tag);
+}
+
+/*
+ * doorbell_core_ipi() sends a dbell to a target CPU in the same core.
+ * Must be used only by architectures that address msgsnd target
+ * by TIR/cpu_thread_in_core.
+ */
+static inline void doorbell_core_ipi(int cpu)
+{
+	u32 tag = cpu_thread_in_core(cpu);
+
+	kvmppc_set_host_ipi(cpu);
+	/* Order previous accesses vs. msgsnd, which is treated as a store */
+	ppc_msgsnd_sync();
+	ppc_msgsnd(PPC_DBELL_MSGTYPE, 0, tag);
+}
+
+/*
+ * Attempt to cause a core doorbell if destination is on the same core.
+ * Returns 1 on success, 0 on failure.
+ */
+static inline int doorbell_try_core_ipi(int cpu)
+{
+	int this_cpu = get_cpu();
+	int ret = 0;
+
+	if (cpumask_test_cpu(cpu, cpu_sibling_mask(this_cpu))) {
+		doorbell_core_ipi(cpu);
+		ret = 1;
+	}
+
+	put_cpu();
+
+	return ret;
+}
+
+#endif /* CONFIG_SMP */
+
 #endif /* _ASM_POWERPC_DBELL_H */
diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c
index f17ff1200eaa..52680cf07c9d 100644
--- a/arch/powerpc/kernel/dbell.c
+++ b/arch/powerpc/kernel/dbell.c
@@ -18,61 +18,6 @@
 
 #ifdef CONFIG_SMP
 
-/*
- * Doorbells must only be used if CPU_FTR_DBELL is available.
- * msgsnd is used in HV, and msgsndp is used in !HV.
- *
- * These should be used by platform code that is aware of restrictions.
- * Other arch code should use ->cause_ipi.
- *
- * doorbell_global_ipi() sends a dbell to any target CPU.
- * Must be used only by architectures that address msgsnd target
- * by PIR/get_hard_smp_processor_id.
- */
-void doorbell_global_ipi(int cpu)
-{
-	u32 tag = get_hard_smp_processor_id(cpu);
-
-	kvmppc_set_host_ipi(cpu);
-	/* Order previous accesses vs. msgsnd, which is treated as a store */
-	ppc_msgsnd_sync();
-	ppc_msgsnd(PPC_DBELL_MSGTYPE, 0, tag);
-}
-
-/*
- * doorbell_core_ipi() sends a dbell to a target CPU in the same core.
- * Must be used only by architectures that address msgsnd target
- * by TIR/cpu_thread_in_core.
- */
-void doorbell_core_ipi(int cpu)
-{
-	u32 tag = cpu_thread_in_core(cpu);
-
-	kvmppc_set_host_ipi(cpu);
-	/* Order previous accesses vs. msgsnd, which is treated as a store */
-	ppc_msgsnd_sync();
-	ppc_msgsnd(PPC_DBELL_MSGTYPE, 0, tag);
-}
-
-/*
- * Attempt to cause a core doorbell if destination is on the same core.
- * Returns 1 on success, 0 on failure.
- */
-int doorbell_try_core_ipi(int cpu)
-{
-	int this_cpu = get_cpu();
-	int ret = 0;
-
-	if (cpumask_test_cpu(cpu, cpu_sibling_mask(this_cpu))) {
-		doorbell_core_ipi(cpu);
-		ret = 1;
-	}
-
-	put_cpu();
-
-	return ret;
-}
-
 void doorbell_exception(struct pt_regs *regs)
 {
 	struct pt_regs *old_regs = set_irq_regs(regs);
-- 
2.23.0

^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v2 2/3] powerpc/pseries: Use doorbells even if XIVE is available
  2020-06-30 11:50 ` Nicholas Piggin
@ 2020-06-30 11:50   ` Nicholas Piggin
  -1 siblings, 0 replies; 12+ messages in thread
From: Nicholas Piggin @ 2020-06-30 11:50 UTC (permalink / raw)
  To: linuxppc-dev
  Cc: kvm-ppc, Nicholas Piggin, Paul Mackerras, Cédric Le Goater,
	Anton Blanchard, David Gibson

KVM supports msgsndp in guests by trapping and emulating the
instruction, so it was decided to always use XIVE for IPIs if it is
available. However on PowerVM systems, msgsndp can be used and gives
better performance. On large systems, high XIVE interrupt rates can
have sub-linear scaling, and using msgsndp can reduce the load on
the interrupt controller.

So switch to using core local doorbells even if XIVE is available.
This reduces performance for KVM guests with an SMT topology by
about 50% for ping-pong context switching between SMT vCPUs. An
option vector (or dt-cpu-ftrs) could be defined to disable msgsndp
to get KVM performance back.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/platforms/pseries/smp.c | 54 ++++++++++++++++++----------
 1 file changed, 36 insertions(+), 18 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 6891710833be..67e6ad5076ce 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -188,13 +188,16 @@ static int pseries_smp_prepare_cpu(int cpu)
 	return 0;
 }
 
-static void smp_pseries_cause_ipi(int cpu)
+/* Cause IPI as setup by the interrupt controller (xics or xive) */
+static void (*ic_cause_ipi)(int cpu) __ro_after_init;
+
+/* Use msgsndp doorbells target is a sibling, else use interrupt controller */
+static void dbell_or_ic_cause_ipi(int cpu)
 {
-	/* POWER9 should not use this handler */
 	if (doorbell_try_core_ipi(cpu))
 		return;
 
-	icp_ops->cause_ipi(cpu);
+	ic_cause_ipi(cpu);
 }
 
 static int pseries_cause_nmi_ipi(int cpu)
@@ -218,26 +221,41 @@ static int pseries_cause_nmi_ipi(int cpu)
 	return 0;
 }
 
-static __init void pSeries_smp_probe_xics(void)
-{
-	xics_smp_probe();
-
-	if (cpu_has_feature(CPU_FTR_DBELL) && !is_secure_guest())
-		smp_ops->cause_ipi = smp_pseries_cause_ipi;
-	else
-		smp_ops->cause_ipi = icp_ops->cause_ipi;
-}
-
 static __init void pSeries_smp_probe(void)
 {
 	if (xive_enabled())
-		/*
-		 * Don't use P9 doorbells when XIVE is enabled. IPIs
-		 * using MMIOs should be faster
-		 */
 		xive_smp_probe();
 	else
-		pSeries_smp_probe_xics();
+		xics_smp_probe();
+
+	/* No doorbell facility, must use the interrupt controller for IPIs */
+	if (!cpu_has_feature(CPU_FTR_DBELL))
+		return;
+
+	/* Doorbells can only be used for IPIs between SMT siblings */
+	if (!cpu_has_feature(CPU_FTR_SMT))
+		return;
+
+	/*
+	 * KVM emulates doorbells by disabling FSCR[MSGP] so msgsndp faults
+	 * to the hypervisor which then reads the instruction from guest
+	 * memory. This can't be done if the guest is secure, so don't use
+	 * doorbells in secure guests.
+	 *
+	 * Under PowerVM, FSCR[MSGP] is enabled so doorbells could be used
+	 * by secure guests if we distinguished this from KVM.
+	 */
+	if (is_secure_guest())
+		return;
+
+	/*
+	 * The guest can use doobells for SMT sibling IPIs, which stay in
+	 * the core rather than going to the interrupt controller. This
+	 * tends to be slower under KVM where doorbells are emulated, but
+	 * faster for PowerVM where they're enabled.
+	 */
+	ic_cause_ipi = smp_ops->cause_ipi;
+	smp_ops->cause_ipi = dbell_or_ic_cause_ipi;
 }
 
 static struct smp_ops_t pseries_smp_ops = {
-- 
2.23.0


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v2 2/3] powerpc/pseries: Use doorbells even if XIVE is available
@ 2020-06-30 11:50   ` Nicholas Piggin
  0 siblings, 0 replies; 12+ messages in thread
From: Nicholas Piggin @ 2020-06-30 11:50 UTC (permalink / raw)
  To: linuxppc-dev
  Cc: kvm-ppc, Nicholas Piggin, Paul Mackerras, Cédric Le Goater,
	Anton Blanchard, David Gibson

KVM supports msgsndp in guests by trapping and emulating the
instruction, so it was decided to always use XIVE for IPIs if it is
available. However on PowerVM systems, msgsndp can be used and gives
better performance. On large systems, high XIVE interrupt rates can
have sub-linear scaling, and using msgsndp can reduce the load on
the interrupt controller.

So switch to using core local doorbells even if XIVE is available.
This reduces performance for KVM guests with an SMT topology by
about 50% for ping-pong context switching between SMT vCPUs. An
option vector (or dt-cpu-ftrs) could be defined to disable msgsndp
to get KVM performance back.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/platforms/pseries/smp.c | 54 ++++++++++++++++++----------
 1 file changed, 36 insertions(+), 18 deletions(-)

diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 6891710833be..67e6ad5076ce 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -188,13 +188,16 @@ static int pseries_smp_prepare_cpu(int cpu)
 	return 0;
 }
 
-static void smp_pseries_cause_ipi(int cpu)
+/* Cause IPI as setup by the interrupt controller (xics or xive) */
+static void (*ic_cause_ipi)(int cpu) __ro_after_init;
+
+/* Use msgsndp doorbells target is a sibling, else use interrupt controller */
+static void dbell_or_ic_cause_ipi(int cpu)
 {
-	/* POWER9 should not use this handler */
 	if (doorbell_try_core_ipi(cpu))
 		return;
 
-	icp_ops->cause_ipi(cpu);
+	ic_cause_ipi(cpu);
 }
 
 static int pseries_cause_nmi_ipi(int cpu)
@@ -218,26 +221,41 @@ static int pseries_cause_nmi_ipi(int cpu)
 	return 0;
 }
 
-static __init void pSeries_smp_probe_xics(void)
-{
-	xics_smp_probe();
-
-	if (cpu_has_feature(CPU_FTR_DBELL) && !is_secure_guest())
-		smp_ops->cause_ipi = smp_pseries_cause_ipi;
-	else
-		smp_ops->cause_ipi = icp_ops->cause_ipi;
-}
-
 static __init void pSeries_smp_probe(void)
 {
 	if (xive_enabled())
-		/*
-		 * Don't use P9 doorbells when XIVE is enabled. IPIs
-		 * using MMIOs should be faster
-		 */
 		xive_smp_probe();
 	else
-		pSeries_smp_probe_xics();
+		xics_smp_probe();
+
+	/* No doorbell facility, must use the interrupt controller for IPIs */
+	if (!cpu_has_feature(CPU_FTR_DBELL))
+		return;
+
+	/* Doorbells can only be used for IPIs between SMT siblings */
+	if (!cpu_has_feature(CPU_FTR_SMT))
+		return;
+
+	/*
+	 * KVM emulates doorbells by disabling FSCR[MSGP] so msgsndp faults
+	 * to the hypervisor which then reads the instruction from guest
+	 * memory. This can't be done if the guest is secure, so don't use
+	 * doorbells in secure guests.
+	 *
+	 * Under PowerVM, FSCR[MSGP] is enabled so doorbells could be used
+	 * by secure guests if we distinguished this from KVM.
+	 */
+	if (is_secure_guest())
+		return;
+
+	/*
+	 * The guest can use doobells for SMT sibling IPIs, which stay in
+	 * the core rather than going to the interrupt controller. This
+	 * tends to be slower under KVM where doorbells are emulated, but
+	 * faster for PowerVM where they're enabled.
+	 */
+	ic_cause_ipi = smp_ops->cause_ipi;
+	smp_ops->cause_ipi = dbell_or_ic_cause_ipi;
 }
 
 static struct smp_ops_t pseries_smp_ops = {
-- 
2.23.0

^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v2 3/3] powerpc/pseries: Add KVM guest doorbell restrictions
  2020-06-30 11:50 ` Nicholas Piggin
@ 2020-06-30 11:50   ` Nicholas Piggin
  -1 siblings, 0 replies; 12+ messages in thread
From: Nicholas Piggin @ 2020-06-30 11:50 UTC (permalink / raw)
  To: linuxppc-dev
  Cc: kvm-ppc, Nicholas Piggin, Paul Mackerras, Cédric Le Goater,
	Anton Blanchard, David Gibson

KVM guests have certain restrictions and performance quirks when using
doorbells. This patch moves the EPAPR KVM guest test so it can be shared
with PSERIES, and uses that in doorbell setup code to apply the KVM
guest quirks and  improves IPI performance for two cases:

 - PowerVM guests may now use doorbells even if they are secure.

 - KVM guests no longer use doorbells if XIVE is available.

There is a valid complaint that "KVM guest" is not a very reasonable
thing to test for, it's preferable for the hypervisor to advertise
particular behaviours to the guest so they could change if the
hypervisor implementation or configuration changes. However in this case
we were already assuming a KVM guest worst case, so this patch is about
containing those quirks. If KVM later advertises fast doorbells, we
should test for that and override the quirks.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/include/asm/firmware.h  |  6 +++++
 arch/powerpc/include/asm/kvm_para.h  | 26 +++----------------
 arch/powerpc/kernel/Makefile         |  5 ++--
 arch/powerpc/kernel/firmware.c       | 19 ++++++++++++++
 arch/powerpc/platforms/pseries/smp.c | 38 +++++++++++++++++-----------
 5 files changed, 53 insertions(+), 41 deletions(-)

diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
index 6003c2e533a0..f67efbaba17f 100644
--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -132,6 +132,12 @@ extern int ibm_nmi_interlock_token;
 
 extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup;
 
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_KVM_GUEST)
+bool is_kvm_guest(void);
+#else
+static inline bool is_kvm_guest(void) { return false; }
+#endif
+
 #ifdef CONFIG_PPC_PSERIES
 void pseries_probe_fw_features(void);
 #else
diff --git a/arch/powerpc/include/asm/kvm_para.h b/arch/powerpc/include/asm/kvm_para.h
index 9c1f6b4b9bbf..744612054c94 100644
--- a/arch/powerpc/include/asm/kvm_para.h
+++ b/arch/powerpc/include/asm/kvm_para.h
@@ -8,35 +8,15 @@
 #ifndef __POWERPC_KVM_PARA_H__
 #define __POWERPC_KVM_PARA_H__
 
-#include <uapi/asm/kvm_para.h>
-
-#ifdef CONFIG_KVM_GUEST
-
-#include <linux/of.h>
-
-static inline int kvm_para_available(void)
-{
-	struct device_node *hyper_node;
-
-	hyper_node = of_find_node_by_path("/hypervisor");
-	if (!hyper_node)
-		return 0;
+#include <asm/firmware.h>
 
-	if (!of_device_is_compatible(hyper_node, "linux,kvm"))
-		return 0;
-
-	return 1;
-}
-
-#else
+#include <uapi/asm/kvm_para.h>
 
 static inline int kvm_para_available(void)
 {
-	return 0;
+	return IS_ENABLED(CONFIG_KVM_GUEST) && is_kvm_guest();
 }
 
-#endif
-
 static inline unsigned int kvm_arch_para_features(void)
 {
 	unsigned long r;
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 244542ae2a91..852164439dcb 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -45,11 +45,10 @@ obj-y				:= cputable.o syscalls.o \
 				   signal.o sysfs.o cacheinfo.o time.o \
 				   prom.o traps.o setup-common.o \
 				   udbg.o misc.o io.o misc_$(BITS).o \
-				   of_platform.o prom_parse.o
+				   of_platform.o prom_parse.o firmware.o
 obj-y				+= ptrace/
 obj-$(CONFIG_PPC64)		+= setup_64.o \
-				   paca.o nvram_64.o firmware.o note.o \
-				   syscall_64.o
+				   paca.o nvram_64.o note.o syscall_64.o
 obj-$(CONFIG_COMPAT)		+= sys_ppc32.o signal_32.o
 obj-$(CONFIG_VDSO32)		+= vdso32/
 obj-$(CONFIG_PPC_WATCHDOG)	+= watchdog.o
diff --git a/arch/powerpc/kernel/firmware.c b/arch/powerpc/kernel/firmware.c
index cc4a5e3f51f1..fe48d319d490 100644
--- a/arch/powerpc/kernel/firmware.c
+++ b/arch/powerpc/kernel/firmware.c
@@ -11,8 +11,27 @@
 
 #include <linux/export.h>
 #include <linux/cache.h>
+#include <linux/of.h>
 
 #include <asm/firmware.h>
 
+#ifdef CONFIG_PPC64
 unsigned long powerpc_firmware_features __read_mostly;
 EXPORT_SYMBOL_GPL(powerpc_firmware_features);
+#endif
+
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_KVM_GUEST)
+bool is_kvm_guest(void)
+{
+	struct device_node *hyper_node;
+
+	hyper_node = of_find_node_by_path("/hypervisor");
+	if (!hyper_node)
+		return 0;
+
+	if (!of_device_is_compatible(hyper_node, "linux,kvm"))
+		return 0;
+
+	return 1;
+}
+#endif
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 67e6ad5076ce..7af0003b40b6 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -236,24 +236,32 @@ static __init void pSeries_smp_probe(void)
 	if (!cpu_has_feature(CPU_FTR_SMT))
 		return;
 
-	/*
-	 * KVM emulates doorbells by disabling FSCR[MSGP] so msgsndp faults
-	 * to the hypervisor which then reads the instruction from guest
-	 * memory. This can't be done if the guest is secure, so don't use
-	 * doorbells in secure guests.
-	 *
-	 * Under PowerVM, FSCR[MSGP] is enabled so doorbells could be used
-	 * by secure guests if we distinguished this from KVM.
-	 */
-	if (is_secure_guest())
-		return;
+	if (is_kvm_guest()) {
+		/*
+		 * KVM emulates doorbells by disabling FSCR[MSGP] so msgsndp
+		 * faults to the hypervisor which then reads the instruction
+		 * from guest memory, which tends to be slower than using XIVE.
+		 */
+		if (xive_enabled())
+			return;
+
+		/*
+		 * XICS hcalls aren't as fast, so we can use msgsndp (which
+		 * also helps exercise KVM emulation), however KVM can't
+		 * emulate secure guests because it can't read the instruction
+		 * out of their memory.
+		 */
+		if (is_secure_guest())
+			return;
+	}
 
 	/*
-	 * The guest can use doobells for SMT sibling IPIs, which stay in
-	 * the core rather than going to the interrupt controller. This
-	 * tends to be slower under KVM where doorbells are emulated, but
-	 * faster for PowerVM where they're enabled.
+	 * Under PowerVM, FSCR[MSGP] is enabled as guest vCPU siblings are
+	 * gang scheduled on the same physical core, so doorbells are always
+	 * faster than the interrupt controller, and they can be used by
+	 * secure guests.
 	 */
+
 	ic_cause_ipi = smp_ops->cause_ipi;
 	smp_ops->cause_ipi = dbell_or_ic_cause_ipi;
 }
-- 
2.23.0


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH v2 3/3] powerpc/pseries: Add KVM guest doorbell restrictions
@ 2020-06-30 11:50   ` Nicholas Piggin
  0 siblings, 0 replies; 12+ messages in thread
From: Nicholas Piggin @ 2020-06-30 11:50 UTC (permalink / raw)
  To: linuxppc-dev
  Cc: kvm-ppc, Nicholas Piggin, Paul Mackerras, Cédric Le Goater,
	Anton Blanchard, David Gibson

KVM guests have certain restrictions and performance quirks when using
doorbells. This patch moves the EPAPR KVM guest test so it can be shared
with PSERIES, and uses that in doorbell setup code to apply the KVM
guest quirks and  improves IPI performance for two cases:

 - PowerVM guests may now use doorbells even if they are secure.

 - KVM guests no longer use doorbells if XIVE is available.

There is a valid complaint that "KVM guest" is not a very reasonable
thing to test for, it's preferable for the hypervisor to advertise
particular behaviours to the guest so they could change if the
hypervisor implementation or configuration changes. However in this case
we were already assuming a KVM guest worst case, so this patch is about
containing those quirks. If KVM later advertises fast doorbells, we
should test for that and override the quirks.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---
 arch/powerpc/include/asm/firmware.h  |  6 +++++
 arch/powerpc/include/asm/kvm_para.h  | 26 +++----------------
 arch/powerpc/kernel/Makefile         |  5 ++--
 arch/powerpc/kernel/firmware.c       | 19 ++++++++++++++
 arch/powerpc/platforms/pseries/smp.c | 38 +++++++++++++++++-----------
 5 files changed, 53 insertions(+), 41 deletions(-)

diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
index 6003c2e533a0..f67efbaba17f 100644
--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -132,6 +132,12 @@ extern int ibm_nmi_interlock_token;
 
 extern unsigned int __start___fw_ftr_fixup, __stop___fw_ftr_fixup;
 
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_KVM_GUEST)
+bool is_kvm_guest(void);
+#else
+static inline bool is_kvm_guest(void) { return false; }
+#endif
+
 #ifdef CONFIG_PPC_PSERIES
 void pseries_probe_fw_features(void);
 #else
diff --git a/arch/powerpc/include/asm/kvm_para.h b/arch/powerpc/include/asm/kvm_para.h
index 9c1f6b4b9bbf..744612054c94 100644
--- a/arch/powerpc/include/asm/kvm_para.h
+++ b/arch/powerpc/include/asm/kvm_para.h
@@ -8,35 +8,15 @@
 #ifndef __POWERPC_KVM_PARA_H__
 #define __POWERPC_KVM_PARA_H__
 
-#include <uapi/asm/kvm_para.h>
-
-#ifdef CONFIG_KVM_GUEST
-
-#include <linux/of.h>
-
-static inline int kvm_para_available(void)
-{
-	struct device_node *hyper_node;
-
-	hyper_node = of_find_node_by_path("/hypervisor");
-	if (!hyper_node)
-		return 0;
+#include <asm/firmware.h>
 
-	if (!of_device_is_compatible(hyper_node, "linux,kvm"))
-		return 0;
-
-	return 1;
-}
-
-#else
+#include <uapi/asm/kvm_para.h>
 
 static inline int kvm_para_available(void)
 {
-	return 0;
+	return IS_ENABLED(CONFIG_KVM_GUEST) && is_kvm_guest();
 }
 
-#endif
-
 static inline unsigned int kvm_arch_para_features(void)
 {
 	unsigned long r;
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 244542ae2a91..852164439dcb 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -45,11 +45,10 @@ obj-y				:= cputable.o syscalls.o \
 				   signal.o sysfs.o cacheinfo.o time.o \
 				   prom.o traps.o setup-common.o \
 				   udbg.o misc.o io.o misc_$(BITS).o \
-				   of_platform.o prom_parse.o
+				   of_platform.o prom_parse.o firmware.o
 obj-y				+= ptrace/
 obj-$(CONFIG_PPC64)		+= setup_64.o \
-				   paca.o nvram_64.o firmware.o note.o \
-				   syscall_64.o
+				   paca.o nvram_64.o note.o syscall_64.o
 obj-$(CONFIG_COMPAT)		+= sys_ppc32.o signal_32.o
 obj-$(CONFIG_VDSO32)		+= vdso32/
 obj-$(CONFIG_PPC_WATCHDOG)	+= watchdog.o
diff --git a/arch/powerpc/kernel/firmware.c b/arch/powerpc/kernel/firmware.c
index cc4a5e3f51f1..fe48d319d490 100644
--- a/arch/powerpc/kernel/firmware.c
+++ b/arch/powerpc/kernel/firmware.c
@@ -11,8 +11,27 @@
 
 #include <linux/export.h>
 #include <linux/cache.h>
+#include <linux/of.h>
 
 #include <asm/firmware.h>
 
+#ifdef CONFIG_PPC64
 unsigned long powerpc_firmware_features __read_mostly;
 EXPORT_SYMBOL_GPL(powerpc_firmware_features);
+#endif
+
+#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_KVM_GUEST)
+bool is_kvm_guest(void)
+{
+	struct device_node *hyper_node;
+
+	hyper_node = of_find_node_by_path("/hypervisor");
+	if (!hyper_node)
+		return 0;
+
+	if (!of_device_is_compatible(hyper_node, "linux,kvm"))
+		return 0;
+
+	return 1;
+}
+#endif
diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c
index 67e6ad5076ce..7af0003b40b6 100644
--- a/arch/powerpc/platforms/pseries/smp.c
+++ b/arch/powerpc/platforms/pseries/smp.c
@@ -236,24 +236,32 @@ static __init void pSeries_smp_probe(void)
 	if (!cpu_has_feature(CPU_FTR_SMT))
 		return;
 
-	/*
-	 * KVM emulates doorbells by disabling FSCR[MSGP] so msgsndp faults
-	 * to the hypervisor which then reads the instruction from guest
-	 * memory. This can't be done if the guest is secure, so don't use
-	 * doorbells in secure guests.
-	 *
-	 * Under PowerVM, FSCR[MSGP] is enabled so doorbells could be used
-	 * by secure guests if we distinguished this from KVM.
-	 */
-	if (is_secure_guest())
-		return;
+	if (is_kvm_guest()) {
+		/*
+		 * KVM emulates doorbells by disabling FSCR[MSGP] so msgsndp
+		 * faults to the hypervisor which then reads the instruction
+		 * from guest memory, which tends to be slower than using XIVE.
+		 */
+		if (xive_enabled())
+			return;
+
+		/*
+		 * XICS hcalls aren't as fast, so we can use msgsndp (which
+		 * also helps exercise KVM emulation), however KVM can't
+		 * emulate secure guests because it can't read the instruction
+		 * out of their memory.
+		 */
+		if (is_secure_guest())
+			return;
+	}
 
 	/*
-	 * The guest can use doobells for SMT sibling IPIs, which stay in
-	 * the core rather than going to the interrupt controller. This
-	 * tends to be slower under KVM where doorbells are emulated, but
-	 * faster for PowerVM where they're enabled.
+	 * Under PowerVM, FSCR[MSGP] is enabled as guest vCPU siblings are
+	 * gang scheduled on the same physical core, so doorbells are always
+	 * faster than the interrupt controller, and they can be used by
+	 * secure guests.
 	 */
+
 	ic_cause_ipi = smp_ops->cause_ipi;
 	smp_ops->cause_ipi = dbell_or_ic_cause_ipi;
 }
-- 
2.23.0

^ permalink raw reply related	[flat|nested] 12+ messages in thread

* Re: [PATCH v2 1/3] powerpc: inline doorbell sending functions
  2020-06-30 11:50   ` Nicholas Piggin
@ 2020-07-22  0:52     ` Michael Ellerman
  -1 siblings, 0 replies; 12+ messages in thread
From: Michael Ellerman @ 2020-07-22  0:52 UTC (permalink / raw)
  To: Nicholas Piggin, linuxppc-dev
  Cc: Nicholas Piggin, kvm-ppc, Paul Mackerras, Cédric Le Goater,
	Anton Blanchard, David Gibson

Nicholas Piggin <npiggin@gmail.com> writes:
> These are only called in one place for a given platform, so inline them
> for performance.
>
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
> ---
>  arch/powerpc/include/asm/dbell.h | 63 ++++++++++++++++++++++++++++++--
>  arch/powerpc/kernel/dbell.c      | 55 ----------------------------
>  2 files changed, 60 insertions(+), 58 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/dbell.h b/arch/powerpc/include/asm/dbell.h
> index 4ce6808deed3..f19d2282e3f8 100644
> --- a/arch/powerpc/include/asm/dbell.h
> +++ b/arch/powerpc/include/asm/dbell.h
> @@ -13,6 +13,7 @@
>  
>  #include <asm/ppc-opcode.h>
>  #include <asm/feature-fixups.h>
> +#include <asm/kvm_ppc.h>
>  
>  #define PPC_DBELL_MSG_BRDCAST	(0x04000000)
>  #define PPC_DBELL_TYPE(x)	(((x) & 0xf) << (63-36))


This somehow breaks ppc40x_defconfig and others:

In file included from /home/michael/linux/arch/powerpc/include/asm/kvm_ppc.h:24,
                 from /home/michael/linux/arch/powerpc/include/asm/dbell.h:16,
                 from /home/michael/linux/arch/powerpc/kernel/asm-offsets.c:38:
/home/michael/linux/arch/powerpc/include/asm/kvm_booke.h: In function ‘kvmppc_get_fault_dar’:
/home/michael/linux/arch/powerpc/include/asm/kvm_booke.h:94:19: error: ‘struct kvm_vcpu_arch’ has no member named ‘fault_dear’
   94 |  return vcpu->arch.fault_dear;
      |                   ^
make[2]: *** [/home/michael/linux/scripts/Makefile.build:114: arch/powerpc/kernel/asm-offsets.s] Error 1
make[1]: *** [/home/michael/linux/Makefile:1175: prepare0] Error 2
make: *** [Makefile:185: __sub-make] Error 2

cheers

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v2 1/3] powerpc: inline doorbell sending functions
@ 2020-07-22  0:52     ` Michael Ellerman
  0 siblings, 0 replies; 12+ messages in thread
From: Michael Ellerman @ 2020-07-22  0:52 UTC (permalink / raw)
  To: Nicholas Piggin, linuxppc-dev
  Cc: Nicholas Piggin, kvm-ppc, Paul Mackerras, Cédric Le Goater,
	Anton Blanchard, David Gibson

Nicholas Piggin <npiggin@gmail.com> writes:
> These are only called in one place for a given platform, so inline them
> for performance.
>
> Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
> ---
>  arch/powerpc/include/asm/dbell.h | 63 ++++++++++++++++++++++++++++++--
>  arch/powerpc/kernel/dbell.c      | 55 ----------------------------
>  2 files changed, 60 insertions(+), 58 deletions(-)
>
> diff --git a/arch/powerpc/include/asm/dbell.h b/arch/powerpc/include/asm/dbell.h
> index 4ce6808deed3..f19d2282e3f8 100644
> --- a/arch/powerpc/include/asm/dbell.h
> +++ b/arch/powerpc/include/asm/dbell.h
> @@ -13,6 +13,7 @@
>  
>  #include <asm/ppc-opcode.h>
>  #include <asm/feature-fixups.h>
> +#include <asm/kvm_ppc.h>
>  
>  #define PPC_DBELL_MSG_BRDCAST	(0x04000000)
>  #define PPC_DBELL_TYPE(x)	(((x) & 0xf) << (63-36))


This somehow breaks ppc40x_defconfig and others:

In file included from /home/michael/linux/arch/powerpc/include/asm/kvm_ppc.h:24,
                 from /home/michael/linux/arch/powerpc/include/asm/dbell.h:16,
                 from /home/michael/linux/arch/powerpc/kernel/asm-offsets.c:38:
/home/michael/linux/arch/powerpc/include/asm/kvm_booke.h: In function ‘kvmppc_get_fault_dar’:
/home/michael/linux/arch/powerpc/include/asm/kvm_booke.h:94:19: error: ‘struct kvm_vcpu_arch’ has no member named ‘fault_dear’
   94 |  return vcpu->arch.fault_dear;
      |                   ^
make[2]: *** [/home/michael/linux/scripts/Makefile.build:114: arch/powerpc/kernel/asm-offsets.s] Error 1
make[1]: *** [/home/michael/linux/Makefile:1175: prepare0] Error 2
make: *** [Makefile:185: __sub-make] Error 2

cheers

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v2 0/3] powerpc/pseries: IPI doorbell improvements
  2020-06-30 11:50 ` Nicholas Piggin
@ 2020-07-23 17:18   ` Cédric Le Goater
  -1 siblings, 0 replies; 12+ messages in thread
From: Cédric Le Goater @ 2020-07-23 17:18 UTC (permalink / raw)
  To: Nicholas Piggin, linuxppc-dev
  Cc: Anton Blanchard, kvm-ppc, Paul Mackerras, David Gibson

On 6/30/20 1:50 PM, Nicholas Piggin wrote:
> Since v1:
> - Fixed SMP compile error.
> - Fixed EPAPR / KVM_GUEST breakage.
> - Expanded patch 3 changelog a bit.
> 
> Thanks,
> Nick

I gave the patchset a try on KVM guests (P9 and P8) and PowerVM LPARs (P9).

Looks good.  

Tested-by: Cédric Le Goater <clg@kaod.org>

Thanks,

C. 

> 
> Nicholas Piggin (3):
>   powerpc: inline doorbell sending functions
>   powerpc/pseries: Use doorbells even if XIVE is available
>   powerpc/pseries: Add KVM guest doorbell restrictions
> 
>  arch/powerpc/include/asm/dbell.h     | 63 ++++++++++++++++++++++++++--
>  arch/powerpc/include/asm/firmware.h  |  6 +++
>  arch/powerpc/include/asm/kvm_para.h  | 26 ++----------
>  arch/powerpc/kernel/Makefile         |  5 +--
>  arch/powerpc/kernel/dbell.c          | 55 ------------------------
>  arch/powerpc/kernel/firmware.c       | 19 +++++++++
>  arch/powerpc/platforms/pseries/smp.c | 62 +++++++++++++++++++--------
>  7 files changed, 134 insertions(+), 102 deletions(-)
> 


^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH v2 0/3] powerpc/pseries: IPI doorbell improvements
@ 2020-07-23 17:18   ` Cédric Le Goater
  0 siblings, 0 replies; 12+ messages in thread
From: Cédric Le Goater @ 2020-07-23 17:18 UTC (permalink / raw)
  To: Nicholas Piggin, linuxppc-dev
  Cc: Anton Blanchard, kvm-ppc, Paul Mackerras, David Gibson

On 6/30/20 1:50 PM, Nicholas Piggin wrote:
> Since v1:
> - Fixed SMP compile error.
> - Fixed EPAPR / KVM_GUEST breakage.
> - Expanded patch 3 changelog a bit.
> 
> Thanks,
> Nick

I gave the patchset a try on KVM guests (P9 and P8) and PowerVM LPARs (P9).

Looks good.  

Tested-by: Cédric Le Goater <clg@kaod.org>

Thanks,

C. 

> 
> Nicholas Piggin (3):
>   powerpc: inline doorbell sending functions
>   powerpc/pseries: Use doorbells even if XIVE is available
>   powerpc/pseries: Add KVM guest doorbell restrictions
> 
>  arch/powerpc/include/asm/dbell.h     | 63 ++++++++++++++++++++++++++--
>  arch/powerpc/include/asm/firmware.h  |  6 +++
>  arch/powerpc/include/asm/kvm_para.h  | 26 ++----------
>  arch/powerpc/kernel/Makefile         |  5 +--
>  arch/powerpc/kernel/dbell.c          | 55 ------------------------
>  arch/powerpc/kernel/firmware.c       | 19 +++++++++
>  arch/powerpc/platforms/pseries/smp.c | 62 +++++++++++++++++++--------
>  7 files changed, 134 insertions(+), 102 deletions(-)
> 

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2020-07-23 18:37 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-30 11:50 [PATCH v2 0/3] powerpc/pseries: IPI doorbell improvements Nicholas Piggin
2020-06-30 11:50 ` Nicholas Piggin
2020-06-30 11:50 ` [PATCH v2 1/3] powerpc: inline doorbell sending functions Nicholas Piggin
2020-06-30 11:50   ` Nicholas Piggin
2020-07-22  0:52   ` Michael Ellerman
2020-07-22  0:52     ` Michael Ellerman
2020-06-30 11:50 ` [PATCH v2 2/3] powerpc/pseries: Use doorbells even if XIVE is available Nicholas Piggin
2020-06-30 11:50   ` Nicholas Piggin
2020-06-30 11:50 ` [PATCH v2 3/3] powerpc/pseries: Add KVM guest doorbell restrictions Nicholas Piggin
2020-06-30 11:50   ` Nicholas Piggin
2020-07-23 17:18 ` [PATCH v2 0/3] powerpc/pseries: IPI doorbell improvements Cédric Le Goater
2020-07-23 17:18   ` Cédric Le Goater

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.