All of lore.kernel.org
 help / color / mirror / Atom feed
From: yang_y_yi@163.com
To: dev@dpdk.org
Cc: jiayu.hu@intel.com, thomas@monjalon.net, yangyi01@inspur.com,
	yang_y_yi@163.com
Subject: [dpdk-dev] [PATCH] gso: add VXLAN UDP GSO support
Date: Wed,  1 Jul 2020 14:46:43 +0800	[thread overview]
Message-ID: <20200701064643.216084-1-yang_y_yi@163.com> (raw)

From: Yi Yang <yangyi01@inspur.com>

Many NICs can't offload VXLAN UFO, so it is very important
to do VXLAN UDP GSO by software to improve VM-to-VM UDP
performance, especially for the case that VM MTU is just
1500 but not 9000.

With this enabled in DPDK, OVS DPDK can leverage it to
improve VM-to-VM UDP performance, performance gain is very
huge, over 2 times.

Signed-off-by: Yi Yang <yangyi01@inspur.com>
---
 lib/librte_gso/Makefile          |   1 +
 lib/librte_gso/gso_common.h      |   5 ++
 lib/librte_gso/gso_tunnel_udp4.c | 108 +++++++++++++++++++++++++++++++++++++++
 lib/librte_gso/gso_tunnel_udp4.h |  43 ++++++++++++++++
 lib/librte_gso/meson.build       |   2 +-
 lib/librte_gso/rte_gso.c         |   8 +++
 6 files changed, 166 insertions(+), 1 deletion(-)
 create mode 100644 lib/librte_gso/gso_tunnel_udp4.c
 create mode 100644 lib/librte_gso/gso_tunnel_udp4.h

diff --git a/lib/librte_gso/Makefile b/lib/librte_gso/Makefile
index a34846e..3005817 100644
--- a/lib/librte_gso/Makefile
+++ b/lib/librte_gso/Makefile
@@ -17,6 +17,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_GSO) += rte_gso.c
 SRCS-$(CONFIG_RTE_LIBRTE_GSO) += gso_common.c
 SRCS-$(CONFIG_RTE_LIBRTE_GSO) += gso_tcp4.c
 SRCS-$(CONFIG_RTE_LIBRTE_GSO) += gso_tunnel_tcp4.c
+SRCS-$(CONFIG_RTE_LIBRTE_GSO) += gso_tunnel_udp4.c
 SRCS-$(CONFIG_RTE_LIBRTE_GSO) += gso_udp4.c
 
 # install this header file
diff --git a/lib/librte_gso/gso_common.h b/lib/librte_gso/gso_common.h
index a0b8343..4d5f303 100644
--- a/lib/librte_gso/gso_common.h
+++ b/lib/librte_gso/gso_common.h
@@ -26,6 +26,11 @@
 		(PKT_TX_TCP_SEG | PKT_TX_IPV4 | PKT_TX_OUTER_IPV4 | \
 		 PKT_TX_TUNNEL_VXLAN))
 
+#define IS_IPV4_VXLAN_UDP4(flag) (((flag) & (PKT_TX_UDP_SEG | PKT_TX_IPV4 | \
+				PKT_TX_OUTER_IPV4 | PKT_TX_TUNNEL_MASK)) == \
+		(PKT_TX_UDP_SEG | PKT_TX_IPV4 | PKT_TX_OUTER_IPV4 | \
+		 PKT_TX_TUNNEL_VXLAN))
+
 #define IS_IPV4_GRE_TCP4(flag) (((flag) & (PKT_TX_TCP_SEG | PKT_TX_IPV4 | \
 				PKT_TX_OUTER_IPV4 | PKT_TX_TUNNEL_MASK)) == \
 		(PKT_TX_TCP_SEG | PKT_TX_IPV4 | PKT_TX_OUTER_IPV4 | \
diff --git a/lib/librte_gso/gso_tunnel_udp4.c b/lib/librte_gso/gso_tunnel_udp4.c
new file mode 100644
index 0000000..1a018ee
--- /dev/null
+++ b/lib/librte_gso/gso_tunnel_udp4.c
@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Inspur Corporation
+ */
+
+#include "gso_common.h"
+#include "gso_tunnel_udp4.h"
+
+#define IPV4_HDR_MF_BIT (1U << 13)
+
+static void
+update_tunnel_ipv4_udp_headers(struct rte_mbuf *pkt, struct rte_mbuf **segs,
+			       uint16_t nb_segs)
+{
+	struct rte_ipv4_hdr *ipv4_hdr;
+	uint16_t outer_id, inner_id, tail_idx, i, length;
+	uint16_t outer_ipv4_offset, inner_ipv4_offset;
+	uint16_t udp_gre_offset, udp_offset;
+	uint8_t update_udp_hdr;
+	uint16_t frag_offset = 0, is_mf;
+
+	outer_ipv4_offset = pkt->outer_l2_len;
+	udp_gre_offset = outer_ipv4_offset + pkt->outer_l3_len;
+	inner_ipv4_offset = udp_gre_offset + pkt->l2_len;
+	udp_offset = inner_ipv4_offset + pkt->l3_len;
+
+	/* Outer IPv4 header. */
+	ipv4_hdr = (struct rte_ipv4_hdr *)(rte_pktmbuf_mtod(pkt, char *) +
+			outer_ipv4_offset);
+	outer_id = rte_be_to_cpu_16(ipv4_hdr->packet_id);
+
+	/* Inner IPv4 header. */
+	ipv4_hdr = (struct rte_ipv4_hdr *)(rte_pktmbuf_mtod(pkt, char *) +
+			inner_ipv4_offset);
+	inner_id = rte_be_to_cpu_16(ipv4_hdr->packet_id);
+
+	tail_idx = nb_segs - 1;
+
+	/* Only update UDP header for VxLAN packets. */
+	update_udp_hdr = (pkt->ol_flags & PKT_TX_TUNNEL_VXLAN) ? 1 : 0;
+
+	for (i = 0; i < nb_segs; i++) {
+		update_ipv4_header(segs[i], outer_ipv4_offset, outer_id);
+		if (update_udp_hdr)
+			update_udp_header(segs[i], udp_gre_offset);
+		update_ipv4_header(segs[i], inner_ipv4_offset, inner_id);
+		update_udp_header(segs[i], udp_offset);
+		/* For the case inner packet is UDP, we must keep UDP
+		 * datagram boundary, it must be handled as IP fragment.
+		 *
+		 * Set IP fragment offset for inner IP header.
+		 */
+		ipv4_hdr = (struct rte_ipv4_hdr *)
+			(rte_pktmbuf_mtod(segs[i], char *) +
+				inner_ipv4_offset);
+		is_mf = i < tail_idx ? IPV4_HDR_MF_BIT : 0;
+		ipv4_hdr->fragment_offset =
+			rte_cpu_to_be_16(frag_offset | is_mf);
+		length = segs[i]->pkt_len - inner_ipv4_offset - pkt->l3_len;
+		frag_offset += (length >> 3);
+		outer_id++;
+	}
+}
+
+int
+gso_tunnel_udp4_segment(struct rte_mbuf *pkt,
+		uint16_t gso_size,
+		struct rte_mempool *direct_pool,
+		struct rte_mempool *indirect_pool,
+		struct rte_mbuf **pkts_out,
+		uint16_t nb_pkts_out)
+{
+	struct rte_ipv4_hdr *inner_ipv4_hdr;
+	uint16_t pyld_unit_size, hdr_offset, frag_off;
+	int ret = 1;
+
+	hdr_offset = pkt->outer_l2_len + pkt->outer_l3_len + pkt->l2_len;
+	inner_ipv4_hdr = (struct rte_ipv4_hdr *)(rte_pktmbuf_mtod(pkt, char *) +
+			hdr_offset);
+	/*
+	 * Don't process the packet whose MF bit or offset in the inner
+	 * IPv4 header are non-zero.
+	 */
+	frag_off = rte_be_to_cpu_16(inner_ipv4_hdr->fragment_offset);
+	if (unlikely(IS_FRAGMENTED(frag_off))) {
+		pkts_out[0] = pkt;
+		return 1;
+	}
+
+	hdr_offset += pkt->l3_len;
+	/* Don't process the packet without data */
+	if ((hdr_offset + pkt->l4_len) >= pkt->pkt_len) {
+		pkts_out[0] = pkt;
+		return 1;
+	}
+
+	/* pyld_unit_size must be a multiple of 8 because frag_off
+	 * uses 8 bytes as unit.
+	 */
+	pyld_unit_size = (gso_size - hdr_offset) & ~7U;
+
+	/* Segment the payload */
+	ret = gso_do_segment(pkt, hdr_offset, pyld_unit_size, direct_pool,
+			indirect_pool, pkts_out, nb_pkts_out);
+	if (ret > 1)
+		update_tunnel_ipv4_udp_headers(pkt, pkts_out, ret);
+
+	return ret;
+}
diff --git a/lib/librte_gso/gso_tunnel_udp4.h b/lib/librte_gso/gso_tunnel_udp4.h
new file mode 100644
index 0000000..d56e342
--- /dev/null
+++ b/lib/librte_gso/gso_tunnel_udp4.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: BSD-3-Clause
+ * Copyright(c) 2020 Inspur Corporation
+ */
+
+#ifndef _GSO_TUNNEL_UDP4_H_
+#define _GSO_TUNNEL_UDP4_H_
+
+#include <stdint.h>
+#include <rte_mbuf.h>
+
+/**
+ * Segment a tunneling packet with inner TCP/IPv4 headers. This function
+ * does not check if the input packet has correct checksums, and does not
+ * update checksums for output GSO segments. Furthermore, it does not
+ * process IP fragment packets.
+ *
+ * @param pkt
+ *  The packet mbuf to segment.
+ * @param gso_size
+ *  The max length of a GSO segment, measured in bytes.
+ * @param direct_pool
+ *  MBUF pool used for allocating direct buffers for output segments.
+ * @param indirect_pool
+ *  MBUF pool used for allocating indirect buffers for output segments.
+ * @param pkts_out
+ *  Pointer array used to store the MBUF addresses of output GSO
+ *  segments, when it succeeds. If the memory space in pkts_out is
+ *  insufficient, it fails and returns -EINVAL.
+ * @param nb_pkts_out
+ *  The max number of items that 'pkts_out' can keep.
+ *
+ * @return
+ *   - The number of GSO segments filled in pkts_out on success.
+ *   - Return -ENOMEM if run out of memory in MBUF pools.
+ *   - Return -EINVAL for invalid parameters.
+ */
+int gso_tunnel_udp4_segment(struct rte_mbuf *pkt,
+		uint16_t gso_size,
+		struct rte_mempool *direct_pool,
+		struct rte_mempool *indirect_pool,
+		struct rte_mbuf **pkts_out,
+		uint16_t nb_pkts_out);
+#endif
diff --git a/lib/librte_gso/meson.build b/lib/librte_gso/meson.build
index ad8dd85..05904f2 100644
--- a/lib/librte_gso/meson.build
+++ b/lib/librte_gso/meson.build
@@ -2,6 +2,6 @@
 # Copyright(c) 2017 Intel Corporation
 
 sources = files('gso_common.c', 'gso_tcp4.c', 'gso_udp4.c',
- 		'gso_tunnel_tcp4.c', 'rte_gso.c')
+		'gso_tunnel_tcp4.c', 'gso_tunnel_udp4.c', 'rte_gso.c')
 headers = files('rte_gso.h')
 deps += ['ethdev']
diff --git a/lib/librte_gso/rte_gso.c b/lib/librte_gso/rte_gso.c
index 751b5b6..cf401b2 100644
--- a/lib/librte_gso/rte_gso.c
+++ b/lib/librte_gso/rte_gso.c
@@ -11,6 +11,7 @@
 #include "gso_common.h"
 #include "gso_tcp4.h"
 #include "gso_tunnel_tcp4.h"
+#include "gso_tunnel_udp4.h"
 #include "gso_udp4.h"
 
 #define ILLEGAL_UDP_GSO_CTX(ctx) \
@@ -62,6 +63,13 @@
 		ret = gso_tunnel_tcp4_segment(pkt, gso_size, ipid_delta,
 				direct_pool, indirect_pool,
 				pkts_out, nb_pkts_out);
+	} else if (IS_IPV4_VXLAN_UDP4(pkt->ol_flags) &&
+			(gso_ctx->gso_types & (DEV_TX_OFFLOAD_VXLAN_TNL_TSO |
+					       DEV_TX_OFFLOAD_UDP_TSO))) {
+		pkt->ol_flags &= (~PKT_TX_UDP_SEG);
+		ret = gso_tunnel_udp4_segment(pkt, gso_size,
+				direct_pool, indirect_pool,
+				pkts_out, nb_pkts_out);
 	} else if (IS_IPV4_TCP(pkt->ol_flags) &&
 			(gso_ctx->gso_types & DEV_TX_OFFLOAD_TCP_TSO)) {
 		pkt->ol_flags &= (~PKT_TX_TCP_SEG);
-- 
1.8.3.1


             reply	other threads:[~2020-07-01  6:46 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-01  6:46 yang_y_yi [this message]
2020-09-27  5:57 ` [dpdk-dev] [PATCH] gso: add VXLAN UDP GSO support yang_y_yi
2020-10-29  6:47 ` [dpdk-dev] [PATCH v1] " yang_y_yi
2020-11-06  4:09   ` Jiayu Hu
2020-11-09  1:03     ` yang_y_yi
2020-11-10  2:21 ` [dpdk-dev] [PATCH v2] " yang_y_yi
2020-11-13 13:16   ` Ananyev, Konstantin
2020-11-16  0:50     ` yang_y_yi
2020-11-16  1:11   ` [dpdk-dev] [PATCH v3] " yang_y_yi
2020-11-19  5:37     ` Hu, Jiayu
2020-11-19  6:43     ` [dpdk-dev] [PATCH v4] gso: add VXLAN UDP/IPv4 support yang_y_yi
2020-11-19  6:49       ` Hu, Jiayu
2021-01-15  3:51         ` yang_y_yi
2021-01-15 10:24           ` Thomas Monjalon
2021-01-18  0:05             ` yang_y_yi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200701064643.216084-1-yang_y_yi@163.com \
    --to=yang_y_yi@163.com \
    --cc=dev@dpdk.org \
    --cc=jiayu.hu@intel.com \
    --cc=thomas@monjalon.net \
    --cc=yangyi01@inspur.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.