* [char-misc:char-misc-testing 18/30] drivers/misc/cardreader/rtsx_pcr.c:1623:2: error: implicit declaration of function 'rtsx_pci_power_off'; did you mean
@ 2020-07-01 6:24 kernel test robot
2020-07-01 11:44 ` Greg Kroah-Hartman
0 siblings, 1 reply; 2+ messages in thread
From: kernel test robot @ 2020-07-01 6:24 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 40079 bytes --]
tree: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git char-misc-testing
head: ba2104c24aba1fa7e19d53f08c985526a6786d8b
commit: 6bf23661d4a7a105001ebb4410c1c0a17752fac4 [18/30] cardreader/rtsx_pcr.c: use generic power management
config: ia64-randconfig-r026-20200630 (attached as .config)
compiler: ia64-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
git checkout 6bf23661d4a7a105001ebb4410c1c0a17752fac4
# save the attached .config to linux build tree
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=ia64
If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>
All errors (new ones prefixed by >>):
<stdin>:1511:2: warning: #warning syscall clone3 not implemented [-Wcpp]
drivers/misc/eeprom/eeprom_93cx6.c:239: warning: Function parameter or member 'byte' not described in 'eeprom_93cx6_readb'
drivers/misc/eeprom/eeprom_93cx6.c:239: warning: Excess function parameter 'word' description in 'eeprom_93cx6_readb'
drivers/misc/eeprom/eeprom_93cx6.c:280: warning: Function parameter or member 'bytes' not described in 'eeprom_93cx6_multireadb'
drivers/misc/eeprom/eeprom_93cx6.c:280: warning: Excess function parameter 'words' description in 'eeprom_93cx6_multireadb'
drivers/misc/eeprom/eeprom_93xx46.c:363:34: warning: 'eeprom_93xx46_of_table' defined but not used [-Wunused-const-variable=]
363 | static const struct of_device_id eeprom_93xx46_of_table[] = {
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/misc/cardreader/rtsx_pcr.c: In function 'rtsx_pci_suspend':
>> drivers/misc/cardreader/rtsx_pcr.c:1623:2: error: implicit declaration of function 'rtsx_pci_power_off'; did you mean 'rtsx_pci_card_power_off'? [-Werror=implicit-function-declaration]
1623 | rtsx_pci_power_off(pcr, HOST_ENTER_S3);
| ^~~~~~~~~~~~~~~~~~
| rtsx_pci_card_power_off
drivers/misc/genwqe/card_base.c: In function 'genwqe_health_check_stop':
drivers/misc/genwqe/card_base.c:1046:6: warning: variable 'rc' set but not used [-Wunused-but-set-variable]
1046 | int rc;
| ^~
drivers/misc/mic/vop/vop_main.c: In function '_vop_scan_devices':
drivers/misc/mic/vop/vop_main.c:617:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
617 | int ret;
| ^~~
drivers/misc/cb710/sgbuf2.c:131: warning: Function parameter or member 'data' not described in 'cb710_sg_dwiter_write_next_block'
drivers/misc/enclosure.c:115: warning: Function parameter or member 'name' not described in 'enclosure_register'
drivers/misc/enclosure.c:115: warning: Function parameter or member 'cb' not described in 'enclosure_register'
drivers/misc/enclosure.c:283: warning: Function parameter or member 'number' not described in 'enclosure_component_alloc'
drivers/misc/enclosure.c:283: warning: Excess function parameter 'num' description in 'enclosure_component_alloc'
drivers/misc/enclosure.c:363: warning: Function parameter or member 'component' not described in 'enclosure_add_device'
drivers/misc/enclosure.c:363: warning: Excess function parameter 'num' description in 'enclosure_add_device'
drivers/misc/enclosure.c:398: warning: Function parameter or member 'dev' not described in 'enclosure_remove_device'
drivers/misc/enclosure.c:398: warning: Excess function parameter 'num' description in 'enclosure_remove_device'
cc1: some warnings being treated as errors
make[4]: *** [scripts/Makefile.build:281: drivers/misc/cardreader/rtsx_pcr.o] Error 1
drivers/misc/genwqe/card_base.c:175: warning: Function parameter or member 'cd' not described in 'genwqe_bus_reset'
drivers/misc/genwqe/card_base.c:272: warning: Function parameter or member 'cd' not described in 'genwqe_recovery_on_fatal_gfir_required'
drivers/misc/genwqe/card_base.c:293: warning: Function parameter or member 'cd' not described in 'genwqe_T_psec'
drivers/misc/genwqe/card_base.c:314: warning: Function parameter or member 'cd' not described in 'genwqe_setup_pf_jtimer'
drivers/misc/genwqe/card_base.c:334: warning: Function parameter or member 'cd' not described in 'genwqe_setup_vf_jtimer'
drivers/misc/genwqe/card_base.c:557: warning: Function parameter or member 'cd' not described in 'genwqe_stop'
drivers/misc/genwqe/card_base.c:581: warning: Function parameter or member 'cd' not described in 'genwqe_recover_card'
drivers/misc/genwqe/card_base.c:581: warning: Function parameter or member 'fatal_err' not described in 'genwqe_recover_card'
drivers/misc/genwqe/card_base.c:629: warning: Function parameter or member 'cd' not described in 'genwqe_fir_checking'
drivers/misc/genwqe/card_base.c:772: warning: Function parameter or member 'pci_dev' not described in 'genwqe_pci_fundamental_reset'
drivers/misc/genwqe/card_base.c:901: warning: Function parameter or member 'data' not described in 'genwqe_health_thread'
drivers/misc/genwqe/card_base.c:1060: warning: Function parameter or member 'cd' not described in 'genwqe_pci_setup'
drivers/misc/genwqe/card_base.c:1145: warning: Function parameter or member 'cd' not described in 'genwqe_pci_remove'
drivers/misc/genwqe/card_base.c:1165: warning: Function parameter or member 'pci_dev' not described in 'genwqe_probe'
drivers/misc/genwqe/card_base.c:1165: warning: Function parameter or member 'id' not described in 'genwqe_probe'
drivers/misc/genwqe/card_base.c:1165: warning: Excess function parameter 'pdev' description in 'genwqe_probe'
drivers/misc/genwqe/card_base.c:1221: warning: Function parameter or member 'pci_dev' not described in 'genwqe_remove'
drivers/misc/genwqe/card_base.c:1350: warning: Function parameter or member 'dev' not described in 'genwqe_devnode'
drivers/misc/genwqe/card_base.c:1350: warning: Function parameter or member 'mode' not described in 'genwqe_devnode'
drivers/misc/ti-st/st_kim.c:42: warning: Function parameter or member 'id' not described in 'st_get_plat_device'
drivers/misc/ti-st/st_kim.c:53: warning: Function parameter or member 'kim_gdata' not described in 'validate_firmware_response'
drivers/misc/ti-st/st_kim.c:126: warning: Function parameter or member 'kim_gdata' not described in 'kim_int_recv'
drivers/misc/ti-st/st_kim.c:126: warning: Function parameter or member 'data' not described in 'kim_int_recv'
drivers/misc/ti-st/st_kim.c:126: warning: Function parameter or member 'count' not described in 'kim_int_recv'
drivers/misc/ti-st/st_kim.c:272: warning: Function parameter or member 'kim_gdata' not described in 'download_firmware'
drivers/misc/ti-st/st_kim.c:445: warning: Function parameter or member 'kim_data' not described in 'st_kim_start'
drivers/misc/ti-st/st_kim.c:509: warning: Function parameter or member 'kim_data' not described in 'st_kim_stop'
drivers/misc/ti-st/st_kim.c:661: warning: Function parameter or member 'core_data' not described in 'st_kim_ref'
drivers/misc/ti-st/st_kim.c:661: warning: Function parameter or member 'id' not described in 'st_kim_ref'
drivers/misc/ti-st/st_core.c:132: warning: Function parameter or member 'st_gdata' not described in 'st_reg_complete'
drivers/misc/ti-st/st_core.c:132: warning: Function parameter or member 'err' not described in 'st_reg_complete'
drivers/misc/ti-st/st_core.c:197: warning: Function parameter or member 'st_gdata' not described in 'st_wakeup_ack'
drivers/misc/ti-st/st_core.c:197: warning: Function parameter or member 'cmd' not described in 'st_wakeup_ack'
drivers/misc/ti-st/st_core.c:226: warning: Function parameter or member 'disc_data' not described in 'st_int_recv'
drivers/misc/ti-st/st_core.c:226: warning: Function parameter or member 'data' not described in 'st_int_recv'
drivers/misc/ti-st/st_core.c:226: warning: Function parameter or member 'count' not described in 'st_int_recv'
drivers/misc/ti-st/st_core.c:387: warning: Function parameter or member 'st_gdata' not described in 'st_int_dequeue'
drivers/misc/ti-st/st_core.c:409: warning: Function parameter or member 'st_gdata' not described in 'st_int_enqueue'
drivers/misc/ti-st/st_core.c:409: warning: Function parameter or member 'skb' not described in 'st_int_enqueue'
drivers/misc/genwqe/card_dev.c:33: warning: Function parameter or member 'cd' not described in 'genwqe_open_files'
drivers/misc/genwqe/card_dev.c:98: warning: Function parameter or member 'virt_addr' not described in 'genwqe_search_pin'
drivers/misc/genwqe/card_dev.c:98: warning: Excess function parameter 'dma_addr' description in 'genwqe_search_pin'
drivers/misc/genwqe/card_dev.c:154: warning: Function parameter or member 'virt_addr' not described in '__genwqe_search_mapping'
drivers/misc/genwqe/card_dev.c:256: warning: Function parameter or member 'cd' not described in 'genwqe_kill_fasync'
drivers/misc/genwqe/card_dev.c:256: warning: Function parameter or member 'sig' not described in 'genwqe_kill_fasync'
drivers/misc/genwqe/card_dev.c:387: warning: Function parameter or member 'vma' not described in 'genwqe_vma_close'
drivers/misc/genwqe/card_dev.c:430: warning: Function parameter or member 'filp' not described in 'genwqe_mmap'
drivers/misc/genwqe/card_dev.c:430: warning: Function parameter or member 'vma' not described in 'genwqe_mmap'
drivers/misc/genwqe/card_dev.c:495: warning: Excess function parameter 'cd' description in 'FLASH_BLOCK'
drivers/misc/genwqe/card_dev.c:495: warning: Excess function parameter 'load' description in 'FLASH_BLOCK'
drivers/misc/genwqe/card_dev.c:827: warning: Function parameter or member 'cfile' not described in 'ddcb_cmd_cleanup'
drivers/misc/genwqe/card_dev.c:827: warning: Function parameter or member 'req' not described in 'ddcb_cmd_cleanup'
drivers/misc/genwqe/card_dev.c:854: warning: Function parameter or member 'cfile' not described in 'ddcb_cmd_fixups'
drivers/misc/genwqe/card_dev.c:854: warning: Function parameter or member 'req' not described in 'ddcb_cmd_fixups'
drivers/misc/genwqe/card_dev.c:984: warning: Function parameter or member 'cfile' not described in 'genwqe_execute_ddcb'
drivers/misc/genwqe/card_dev.c:984: warning: Function parameter or member 'cmd' not described in 'genwqe_execute_ddcb'
drivers/misc/genwqe/card_dev.c:1350: warning: Function parameter or member 'cd' not described in 'genwqe_device_remove'
drivers/misc/lattice-ecp3-config.c: In function 'firmware_load':
drivers/misc/lattice-ecp3-config.c:70:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
70 | int ret;
| ^~~
drivers/misc/genwqe/card_debugfs.c:30: warning: Function parameter or member 's' not described in 'dbg_uidn_show'
drivers/misc/genwqe/card_debugfs.c:30: warning: Function parameter or member 'regs' not described in 'dbg_uidn_show'
drivers/misc/genwqe/card_debugfs.c:30: warning: Function parameter or member 'entries' not described in 'dbg_uidn_show'
drivers/misc/habanalabs/pci.c:27: warning: Function parameter or member 'name' not described in 'hl_pci_bars_map'
drivers/misc/habanalabs/pci.c:27: warning: Excess function parameter 'bar_name' description in 'hl_pci_bars_map'
drivers/misc/habanalabs/pci.c:147: warning: Function parameter or member 'addr' not described in 'hl_pci_iatu_write'
drivers/misc/habanalabs/pci.c:147: warning: Function parameter or member 'data' not described in 'hl_pci_iatu_write'
drivers/misc/habanalabs/pci.c:324: warning: Excess function parameter 'dma_mask' description in 'hl_pci_set_dma_mask'
drivers/misc/genwqe/card_sysfs.c:32: warning: cannot understand function prototype: 'const char * const genwqe_types[] = '
drivers/misc/genwqe/card_sysfs.c:150: warning: Function parameter or member 'dev' not described in 'curr_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:150: warning: Function parameter or member 'attr' not described in 'curr_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:150: warning: Function parameter or member 'buf' not described in 'curr_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:166: warning: Function parameter or member 'dev' not described in 'next_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:166: warning: Function parameter or member 'attr' not described in 'next_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:166: warning: Function parameter or member 'buf' not described in 'next_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:271: warning: Function parameter or member 'kobj' not described in 'genwqe_is_visible'
drivers/misc/genwqe/card_sysfs.c:271: warning: Function parameter or member 'attr' not described in 'genwqe_is_visible'
--
drivers/misc/eeprom/eeprom_93cx6.c:239: warning: Function parameter or member 'byte' not described in 'eeprom_93cx6_readb'
drivers/misc/eeprom/eeprom_93cx6.c:239: warning: Excess function parameter 'word' description in 'eeprom_93cx6_readb'
drivers/misc/eeprom/eeprom_93cx6.c:280: warning: Function parameter or member 'bytes' not described in 'eeprom_93cx6_multireadb'
drivers/misc/eeprom/eeprom_93cx6.c:280: warning: Excess function parameter 'words' description in 'eeprom_93cx6_multireadb'
drivers/misc/eeprom/eeprom_93xx46.c:363:34: warning: 'eeprom_93xx46_of_table' defined but not used [-Wunused-const-variable=]
363 | static const struct of_device_id eeprom_93xx46_of_table[] = {
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/misc/cardreader/rtsx_pcr.c: In function 'rtsx_pci_suspend':
>> drivers/misc/cardreader/rtsx_pcr.c:1623:2: error: implicit declaration of function 'rtsx_pci_power_off'; did you mean 'rtsx_pci_card_power_off'? [-Werror=implicit-function-declaration]
1623 | rtsx_pci_power_off(pcr, HOST_ENTER_S3);
| ^~~~~~~~~~~~~~~~~~
| rtsx_pci_card_power_off
drivers/misc/genwqe/card_base.c: In function 'genwqe_health_check_stop':
drivers/misc/genwqe/card_base.c:1046:6: warning: variable 'rc' set but not used [-Wunused-but-set-variable]
1046 | int rc;
| ^~
drivers/misc/mic/vop/vop_main.c: In function '_vop_scan_devices':
drivers/misc/mic/vop/vop_main.c:617:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
617 | int ret;
| ^~~
drivers/misc/cb710/sgbuf2.c:131: warning: Function parameter or member 'data' not described in 'cb710_sg_dwiter_write_next_block'
drivers/misc/enclosure.c:115: warning: Function parameter or member 'name' not described in 'enclosure_register'
drivers/misc/enclosure.c:115: warning: Function parameter or member 'cb' not described in 'enclosure_register'
drivers/misc/enclosure.c:283: warning: Function parameter or member 'number' not described in 'enclosure_component_alloc'
drivers/misc/enclosure.c:283: warning: Excess function parameter 'num' description in 'enclosure_component_alloc'
drivers/misc/enclosure.c:363: warning: Function parameter or member 'component' not described in 'enclosure_add_device'
drivers/misc/enclosure.c:363: warning: Excess function parameter 'num' description in 'enclosure_add_device'
drivers/misc/enclosure.c:398: warning: Function parameter or member 'dev' not described in 'enclosure_remove_device'
drivers/misc/enclosure.c:398: warning: Excess function parameter 'num' description in 'enclosure_remove_device'
cc1: some warnings being treated as errors
make[4]: *** [scripts/Makefile.build:281: drivers/misc/cardreader/rtsx_pcr.o] Error 1
drivers/misc/genwqe/card_base.c:175: warning: Function parameter or member 'cd' not described in 'genwqe_bus_reset'
drivers/misc/genwqe/card_base.c:272: warning: Function parameter or member 'cd' not described in 'genwqe_recovery_on_fatal_gfir_required'
drivers/misc/genwqe/card_base.c:293: warning: Function parameter or member 'cd' not described in 'genwqe_T_psec'
drivers/misc/genwqe/card_base.c:314: warning: Function parameter or member 'cd' not described in 'genwqe_setup_pf_jtimer'
drivers/misc/genwqe/card_base.c:334: warning: Function parameter or member 'cd' not described in 'genwqe_setup_vf_jtimer'
drivers/misc/genwqe/card_base.c:557: warning: Function parameter or member 'cd' not described in 'genwqe_stop'
drivers/misc/genwqe/card_base.c:581: warning: Function parameter or member 'cd' not described in 'genwqe_recover_card'
drivers/misc/genwqe/card_base.c:581: warning: Function parameter or member 'fatal_err' not described in 'genwqe_recover_card'
drivers/misc/genwqe/card_base.c:629: warning: Function parameter or member 'cd' not described in 'genwqe_fir_checking'
drivers/misc/genwqe/card_base.c:772: warning: Function parameter or member 'pci_dev' not described in 'genwqe_pci_fundamental_reset'
drivers/misc/genwqe/card_base.c:901: warning: Function parameter or member 'data' not described in 'genwqe_health_thread'
drivers/misc/genwqe/card_base.c:1060: warning: Function parameter or member 'cd' not described in 'genwqe_pci_setup'
drivers/misc/genwqe/card_base.c:1145: warning: Function parameter or member 'cd' not described in 'genwqe_pci_remove'
drivers/misc/genwqe/card_base.c:1165: warning: Function parameter or member 'pci_dev' not described in 'genwqe_probe'
drivers/misc/genwqe/card_base.c:1165: warning: Function parameter or member 'id' not described in 'genwqe_probe'
drivers/misc/genwqe/card_base.c:1165: warning: Excess function parameter 'pdev' description in 'genwqe_probe'
drivers/misc/genwqe/card_base.c:1221: warning: Function parameter or member 'pci_dev' not described in 'genwqe_remove'
drivers/misc/genwqe/card_base.c:1350: warning: Function parameter or member 'dev' not described in 'genwqe_devnode'
drivers/misc/genwqe/card_base.c:1350: warning: Function parameter or member 'mode' not described in 'genwqe_devnode'
drivers/misc/ti-st/st_kim.c:42: warning: Function parameter or member 'id' not described in 'st_get_plat_device'
drivers/misc/ti-st/st_kim.c:53: warning: Function parameter or member 'kim_gdata' not described in 'validate_firmware_response'
drivers/misc/ti-st/st_kim.c:126: warning: Function parameter or member 'kim_gdata' not described in 'kim_int_recv'
drivers/misc/ti-st/st_kim.c:126: warning: Function parameter or member 'data' not described in 'kim_int_recv'
drivers/misc/ti-st/st_kim.c:126: warning: Function parameter or member 'count' not described in 'kim_int_recv'
drivers/misc/ti-st/st_kim.c:272: warning: Function parameter or member 'kim_gdata' not described in 'download_firmware'
drivers/misc/ti-st/st_kim.c:445: warning: Function parameter or member 'kim_data' not described in 'st_kim_start'
drivers/misc/ti-st/st_kim.c:509: warning: Function parameter or member 'kim_data' not described in 'st_kim_stop'
drivers/misc/ti-st/st_kim.c:661: warning: Function parameter or member 'core_data' not described in 'st_kim_ref'
drivers/misc/ti-st/st_kim.c:661: warning: Function parameter or member 'id' not described in 'st_kim_ref'
drivers/misc/ti-st/st_core.c:132: warning: Function parameter or member 'st_gdata' not described in 'st_reg_complete'
drivers/misc/ti-st/st_core.c:132: warning: Function parameter or member 'err' not described in 'st_reg_complete'
drivers/misc/ti-st/st_core.c:197: warning: Function parameter or member 'st_gdata' not described in 'st_wakeup_ack'
drivers/misc/ti-st/st_core.c:197: warning: Function parameter or member 'cmd' not described in 'st_wakeup_ack'
drivers/misc/ti-st/st_core.c:226: warning: Function parameter or member 'disc_data' not described in 'st_int_recv'
drivers/misc/ti-st/st_core.c:226: warning: Function parameter or member 'data' not described in 'st_int_recv'
drivers/misc/ti-st/st_core.c:226: warning: Function parameter or member 'count' not described in 'st_int_recv'
drivers/misc/ti-st/st_core.c:387: warning: Function parameter or member 'st_gdata' not described in 'st_int_dequeue'
drivers/misc/ti-st/st_core.c:409: warning: Function parameter or member 'st_gdata' not described in 'st_int_enqueue'
drivers/misc/ti-st/st_core.c:409: warning: Function parameter or member 'skb' not described in 'st_int_enqueue'
drivers/misc/genwqe/card_dev.c:33: warning: Function parameter or member 'cd' not described in 'genwqe_open_files'
drivers/misc/genwqe/card_dev.c:98: warning: Function parameter or member 'virt_addr' not described in 'genwqe_search_pin'
drivers/misc/genwqe/card_dev.c:98: warning: Excess function parameter 'dma_addr' description in 'genwqe_search_pin'
drivers/misc/genwqe/card_dev.c:154: warning: Function parameter or member 'virt_addr' not described in '__genwqe_search_mapping'
drivers/misc/genwqe/card_dev.c:256: warning: Function parameter or member 'cd' not described in 'genwqe_kill_fasync'
drivers/misc/genwqe/card_dev.c:256: warning: Function parameter or member 'sig' not described in 'genwqe_kill_fasync'
drivers/misc/genwqe/card_dev.c:387: warning: Function parameter or member 'vma' not described in 'genwqe_vma_close'
drivers/misc/genwqe/card_dev.c:430: warning: Function parameter or member 'filp' not described in 'genwqe_mmap'
drivers/misc/genwqe/card_dev.c:430: warning: Function parameter or member 'vma' not described in 'genwqe_mmap'
drivers/misc/genwqe/card_dev.c:495: warning: Excess function parameter 'cd' description in 'FLASH_BLOCK'
drivers/misc/genwqe/card_dev.c:495: warning: Excess function parameter 'load' description in 'FLASH_BLOCK'
drivers/misc/genwqe/card_dev.c:827: warning: Function parameter or member 'cfile' not described in 'ddcb_cmd_cleanup'
drivers/misc/genwqe/card_dev.c:827: warning: Function parameter or member 'req' not described in 'ddcb_cmd_cleanup'
drivers/misc/genwqe/card_dev.c:854: warning: Function parameter or member 'cfile' not described in 'ddcb_cmd_fixups'
drivers/misc/genwqe/card_dev.c:854: warning: Function parameter or member 'req' not described in 'ddcb_cmd_fixups'
drivers/misc/genwqe/card_dev.c:984: warning: Function parameter or member 'cfile' not described in 'genwqe_execute_ddcb'
drivers/misc/genwqe/card_dev.c:984: warning: Function parameter or member 'cmd' not described in 'genwqe_execute_ddcb'
drivers/misc/genwqe/card_dev.c:1350: warning: Function parameter or member 'cd' not described in 'genwqe_device_remove'
drivers/misc/lattice-ecp3-config.c: In function 'firmware_load':
drivers/misc/lattice-ecp3-config.c:70:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
70 | int ret;
| ^~~
drivers/misc/genwqe/card_debugfs.c:30: warning: Function parameter or member 's' not described in 'dbg_uidn_show'
drivers/misc/genwqe/card_debugfs.c:30: warning: Function parameter or member 'regs' not described in 'dbg_uidn_show'
drivers/misc/genwqe/card_debugfs.c:30: warning: Function parameter or member 'entries' not described in 'dbg_uidn_show'
drivers/misc/habanalabs/pci.c:27: warning: Function parameter or member 'name' not described in 'hl_pci_bars_map'
drivers/misc/habanalabs/pci.c:27: warning: Excess function parameter 'bar_name' description in 'hl_pci_bars_map'
drivers/misc/habanalabs/pci.c:147: warning: Function parameter or member 'addr' not described in 'hl_pci_iatu_write'
drivers/misc/habanalabs/pci.c:147: warning: Function parameter or member 'data' not described in 'hl_pci_iatu_write'
drivers/misc/habanalabs/pci.c:324: warning: Excess function parameter 'dma_mask' description in 'hl_pci_set_dma_mask'
drivers/misc/genwqe/card_sysfs.c:32: warning: cannot understand function prototype: 'const char * const genwqe_types[] = '
drivers/misc/genwqe/card_sysfs.c:150: warning: Function parameter or member 'dev' not described in 'curr_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:150: warning: Function parameter or member 'attr' not described in 'curr_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:150: warning: Function parameter or member 'buf' not described in 'curr_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:166: warning: Function parameter or member 'dev' not described in 'next_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:166: warning: Function parameter or member 'attr' not described in 'next_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:166: warning: Function parameter or member 'buf' not described in 'next_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:271: warning: Function parameter or member 'kobj' not described in 'genwqe_is_visible'
drivers/misc/genwqe/card_sysfs.c:271: warning: Function parameter or member 'attr' not described in 'genwqe_is_visible'
--
drivers/misc/eeprom/eeprom_93cx6.c:239: warning: Function parameter or member 'byte' not described in 'eeprom_93cx6_readb'
drivers/misc/eeprom/eeprom_93cx6.c:239: warning: Excess function parameter 'word' description in 'eeprom_93cx6_readb'
drivers/misc/eeprom/eeprom_93cx6.c:280: warning: Function parameter or member 'bytes' not described in 'eeprom_93cx6_multireadb'
drivers/misc/eeprom/eeprom_93cx6.c:280: warning: Excess function parameter 'words' description in 'eeprom_93cx6_multireadb'
drivers/misc/eeprom/eeprom_93xx46.c:363:34: warning: 'eeprom_93xx46_of_table' defined but not used [-Wunused-const-variable=]
363 | static const struct of_device_id eeprom_93xx46_of_table[] = {
| ^~~~~~~~~~~~~~~~~~~~~~
drivers/misc/cardreader/rtsx_pcr.c: In function 'rtsx_pci_suspend':
>> drivers/misc/cardreader/rtsx_pcr.c:1623:2: error: implicit declaration of function 'rtsx_pci_power_off'; did you mean 'rtsx_pci_card_power_off'? [-Werror=implicit-function-declaration]
1623 | rtsx_pci_power_off(pcr, HOST_ENTER_S3);
| ^~~~~~~~~~~~~~~~~~
| rtsx_pci_card_power_off
drivers/misc/genwqe/card_base.c: In function 'genwqe_health_check_stop':
drivers/misc/genwqe/card_base.c:1046:6: warning: variable 'rc' set but not used [-Wunused-but-set-variable]
1046 | int rc;
| ^~
drivers/misc/mic/vop/vop_main.c: In function '_vop_scan_devices':
drivers/misc/mic/vop/vop_main.c:617:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
617 | int ret;
| ^~~
drivers/misc/cb710/sgbuf2.c:131: warning: Function parameter or member 'data' not described in 'cb710_sg_dwiter_write_next_block'
drivers/misc/enclosure.c:115: warning: Function parameter or member 'name' not described in 'enclosure_register'
drivers/misc/enclosure.c:115: warning: Function parameter or member 'cb' not described in 'enclosure_register'
drivers/misc/enclosure.c:283: warning: Function parameter or member 'number' not described in 'enclosure_component_alloc'
drivers/misc/enclosure.c:283: warning: Excess function parameter 'num' description in 'enclosure_component_alloc'
drivers/misc/enclosure.c:363: warning: Function parameter or member 'component' not described in 'enclosure_add_device'
drivers/misc/enclosure.c:363: warning: Excess function parameter 'num' description in 'enclosure_add_device'
drivers/misc/enclosure.c:398: warning: Function parameter or member 'dev' not described in 'enclosure_remove_device'
drivers/misc/enclosure.c:398: warning: Excess function parameter 'num' description in 'enclosure_remove_device'
cc1: some warnings being treated as errors
make[4]: *** [scripts/Makefile.build:281: drivers/misc/cardreader/rtsx_pcr.o] Error 1
drivers/misc/genwqe/card_base.c:175: warning: Function parameter or member 'cd' not described in 'genwqe_bus_reset'
drivers/misc/genwqe/card_base.c:272: warning: Function parameter or member 'cd' not described in 'genwqe_recovery_on_fatal_gfir_required'
drivers/misc/genwqe/card_base.c:293: warning: Function parameter or member 'cd' not described in 'genwqe_T_psec'
drivers/misc/genwqe/card_base.c:314: warning: Function parameter or member 'cd' not described in 'genwqe_setup_pf_jtimer'
drivers/misc/genwqe/card_base.c:334: warning: Function parameter or member 'cd' not described in 'genwqe_setup_vf_jtimer'
drivers/misc/genwqe/card_base.c:557: warning: Function parameter or member 'cd' not described in 'genwqe_stop'
drivers/misc/genwqe/card_base.c:581: warning: Function parameter or member 'cd' not described in 'genwqe_recover_card'
drivers/misc/genwqe/card_base.c:581: warning: Function parameter or member 'fatal_err' not described in 'genwqe_recover_card'
drivers/misc/genwqe/card_base.c:629: warning: Function parameter or member 'cd' not described in 'genwqe_fir_checking'
drivers/misc/genwqe/card_base.c:772: warning: Function parameter or member 'pci_dev' not described in 'genwqe_pci_fundamental_reset'
drivers/misc/genwqe/card_base.c:901: warning: Function parameter or member 'data' not described in 'genwqe_health_thread'
drivers/misc/genwqe/card_base.c:1060: warning: Function parameter or member 'cd' not described in 'genwqe_pci_setup'
drivers/misc/genwqe/card_base.c:1145: warning: Function parameter or member 'cd' not described in 'genwqe_pci_remove'
drivers/misc/genwqe/card_base.c:1165: warning: Function parameter or member 'pci_dev' not described in 'genwqe_probe'
drivers/misc/genwqe/card_base.c:1165: warning: Function parameter or member 'id' not described in 'genwqe_probe'
drivers/misc/genwqe/card_base.c:1165: warning: Excess function parameter 'pdev' description in 'genwqe_probe'
drivers/misc/genwqe/card_base.c:1221: warning: Function parameter or member 'pci_dev' not described in 'genwqe_remove'
drivers/misc/genwqe/card_base.c:1350: warning: Function parameter or member 'dev' not described in 'genwqe_devnode'
drivers/misc/genwqe/card_base.c:1350: warning: Function parameter or member 'mode' not described in 'genwqe_devnode'
drivers/misc/ti-st/st_kim.c:42: warning: Function parameter or member 'id' not described in 'st_get_plat_device'
drivers/misc/ti-st/st_kim.c:53: warning: Function parameter or member 'kim_gdata' not described in 'validate_firmware_response'
drivers/misc/ti-st/st_kim.c:126: warning: Function parameter or member 'kim_gdata' not described in 'kim_int_recv'
drivers/misc/ti-st/st_kim.c:126: warning: Function parameter or member 'data' not described in 'kim_int_recv'
drivers/misc/ti-st/st_kim.c:126: warning: Function parameter or member 'count' not described in 'kim_int_recv'
drivers/misc/ti-st/st_kim.c:272: warning: Function parameter or member 'kim_gdata' not described in 'download_firmware'
drivers/misc/ti-st/st_kim.c:445: warning: Function parameter or member 'kim_data' not described in 'st_kim_start'
drivers/misc/ti-st/st_kim.c:509: warning: Function parameter or member 'kim_data' not described in 'st_kim_stop'
drivers/misc/ti-st/st_kim.c:661: warning: Function parameter or member 'core_data' not described in 'st_kim_ref'
drivers/misc/ti-st/st_kim.c:661: warning: Function parameter or member 'id' not described in 'st_kim_ref'
drivers/misc/ti-st/st_core.c:132: warning: Function parameter or member 'st_gdata' not described in 'st_reg_complete'
drivers/misc/ti-st/st_core.c:132: warning: Function parameter or member 'err' not described in 'st_reg_complete'
drivers/misc/ti-st/st_core.c:197: warning: Function parameter or member 'st_gdata' not described in 'st_wakeup_ack'
drivers/misc/ti-st/st_core.c:197: warning: Function parameter or member 'cmd' not described in 'st_wakeup_ack'
drivers/misc/ti-st/st_core.c:226: warning: Function parameter or member 'disc_data' not described in 'st_int_recv'
drivers/misc/ti-st/st_core.c:226: warning: Function parameter or member 'data' not described in 'st_int_recv'
drivers/misc/ti-st/st_core.c:226: warning: Function parameter or member 'count' not described in 'st_int_recv'
drivers/misc/ti-st/st_core.c:387: warning: Function parameter or member 'st_gdata' not described in 'st_int_dequeue'
drivers/misc/ti-st/st_core.c:409: warning: Function parameter or member 'st_gdata' not described in 'st_int_enqueue'
drivers/misc/ti-st/st_core.c:409: warning: Function parameter or member 'skb' not described in 'st_int_enqueue'
drivers/misc/genwqe/card_dev.c:33: warning: Function parameter or member 'cd' not described in 'genwqe_open_files'
drivers/misc/genwqe/card_dev.c:98: warning: Function parameter or member 'virt_addr' not described in 'genwqe_search_pin'
drivers/misc/genwqe/card_dev.c:98: warning: Excess function parameter 'dma_addr' description in 'genwqe_search_pin'
drivers/misc/genwqe/card_dev.c:154: warning: Function parameter or member 'virt_addr' not described in '__genwqe_search_mapping'
drivers/misc/genwqe/card_dev.c:256: warning: Function parameter or member 'cd' not described in 'genwqe_kill_fasync'
drivers/misc/genwqe/card_dev.c:256: warning: Function parameter or member 'sig' not described in 'genwqe_kill_fasync'
drivers/misc/genwqe/card_dev.c:387: warning: Function parameter or member 'vma' not described in 'genwqe_vma_close'
drivers/misc/genwqe/card_dev.c:430: warning: Function parameter or member 'filp' not described in 'genwqe_mmap'
drivers/misc/genwqe/card_dev.c:430: warning: Function parameter or member 'vma' not described in 'genwqe_mmap'
drivers/misc/genwqe/card_dev.c:495: warning: Excess function parameter 'cd' description in 'FLASH_BLOCK'
drivers/misc/genwqe/card_dev.c:495: warning: Excess function parameter 'load' description in 'FLASH_BLOCK'
drivers/misc/genwqe/card_dev.c:827: warning: Function parameter or member 'cfile' not described in 'ddcb_cmd_cleanup'
drivers/misc/genwqe/card_dev.c:827: warning: Function parameter or member 'req' not described in 'ddcb_cmd_cleanup'
drivers/misc/genwqe/card_dev.c:854: warning: Function parameter or member 'cfile' not described in 'ddcb_cmd_fixups'
drivers/misc/genwqe/card_dev.c:854: warning: Function parameter or member 'req' not described in 'ddcb_cmd_fixups'
drivers/misc/genwqe/card_dev.c:984: warning: Function parameter or member 'cfile' not described in 'genwqe_execute_ddcb'
drivers/misc/genwqe/card_dev.c:984: warning: Function parameter or member 'cmd' not described in 'genwqe_execute_ddcb'
drivers/misc/genwqe/card_dev.c:1350: warning: Function parameter or member 'cd' not described in 'genwqe_device_remove'
drivers/misc/lattice-ecp3-config.c: In function 'firmware_load':
drivers/misc/lattice-ecp3-config.c:70:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable]
70 | int ret;
| ^~~
drivers/misc/genwqe/card_debugfs.c:30: warning: Function parameter or member 's' not described in 'dbg_uidn_show'
drivers/misc/genwqe/card_debugfs.c:30: warning: Function parameter or member 'regs' not described in 'dbg_uidn_show'
drivers/misc/genwqe/card_debugfs.c:30: warning: Function parameter or member 'entries' not described in 'dbg_uidn_show'
drivers/misc/habanalabs/pci.c:27: warning: Function parameter or member 'name' not described in 'hl_pci_bars_map'
drivers/misc/habanalabs/pci.c:27: warning: Excess function parameter 'bar_name' description in 'hl_pci_bars_map'
drivers/misc/habanalabs/pci.c:147: warning: Function parameter or member 'addr' not described in 'hl_pci_iatu_write'
drivers/misc/habanalabs/pci.c:147: warning: Function parameter or member 'data' not described in 'hl_pci_iatu_write'
drivers/misc/habanalabs/pci.c:324: warning: Excess function parameter 'dma_mask' description in 'hl_pci_set_dma_mask'
drivers/misc/genwqe/card_sysfs.c:32: warning: cannot understand function prototype: 'const char * const genwqe_types[] = '
drivers/misc/genwqe/card_sysfs.c:150: warning: Function parameter or member 'dev' not described in 'curr_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:150: warning: Function parameter or member 'attr' not described in 'curr_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:150: warning: Function parameter or member 'buf' not described in 'curr_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:166: warning: Function parameter or member 'dev' not described in 'next_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:166: warning: Function parameter or member 'attr' not described in 'next_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:166: warning: Function parameter or member 'buf' not described in 'next_bitstream_show'
drivers/misc/genwqe/card_sysfs.c:271: warning: Function parameter or member 'kobj' not described in 'genwqe_is_visible'
drivers/misc/genwqe/card_sysfs.c:271: warning: Function parameter or member 'attr' not described in 'genwqe_is_visible'
..
vim +1623 drivers/misc/cardreader/rtsx_pcr.c
ada8a8a13b13a2 drivers/mfd/rtsx_pcr.c Wei WANG 2012-10-29 1606
6bf23661d4a7a1 drivers/misc/cardreader/rtsx_pcr.c Vaibhav Gupta 2020-06-29 1607 static int __maybe_unused rtsx_pci_suspend(struct device *dev_d)
ada8a8a13b13a2 drivers/mfd/rtsx_pcr.c Wei WANG 2012-10-29 1608 {
6bf23661d4a7a1 drivers/misc/cardreader/rtsx_pcr.c Vaibhav Gupta 2020-06-29 1609 struct pci_dev *pcidev = to_pci_dev(dev_d);
ada8a8a13b13a2 drivers/mfd/rtsx_pcr.c Wei WANG 2012-10-29 1610 struct pcr_handle *handle;
ada8a8a13b13a2 drivers/mfd/rtsx_pcr.c Wei WANG 2012-10-29 1611 struct rtsx_pcr *pcr;
ada8a8a13b13a2 drivers/mfd/rtsx_pcr.c Wei WANG 2012-10-29 1612
ada8a8a13b13a2 drivers/mfd/rtsx_pcr.c Wei WANG 2012-10-29 1613 dev_dbg(&(pcidev->dev), "--> %s\n", __func__);
ada8a8a13b13a2 drivers/mfd/rtsx_pcr.c Wei WANG 2012-10-29 1614
ada8a8a13b13a2 drivers/mfd/rtsx_pcr.c Wei WANG 2012-10-29 1615 handle = pci_get_drvdata(pcidev);
ada8a8a13b13a2 drivers/mfd/rtsx_pcr.c Wei WANG 2012-10-29 1616 pcr = handle->pcr;
ada8a8a13b13a2 drivers/mfd/rtsx_pcr.c Wei WANG 2012-10-29 1617
ada8a8a13b13a2 drivers/mfd/rtsx_pcr.c Wei WANG 2012-10-29 1618 cancel_delayed_work(&pcr->carddet_work);
ada8a8a13b13a2 drivers/mfd/rtsx_pcr.c Wei WANG 2012-10-29 1619 cancel_delayed_work(&pcr->idle_work);
ada8a8a13b13a2 drivers/mfd/rtsx_pcr.c Wei WANG 2012-10-29 1620
ada8a8a13b13a2 drivers/mfd/rtsx_pcr.c Wei WANG 2012-10-29 1621 mutex_lock(&pcr->pcr_mutex);
ada8a8a13b13a2 drivers/mfd/rtsx_pcr.c Wei WANG 2012-10-29 1622
5947c167d145f3 drivers/mfd/rtsx_pcr.c Wei WANG 2013-08-20 @1623 rtsx_pci_power_off(pcr, HOST_ENTER_S3);
ada8a8a13b13a2 drivers/mfd/rtsx_pcr.c Wei WANG 2012-10-29 1624
6bf23661d4a7a1 drivers/misc/cardreader/rtsx_pcr.c Vaibhav Gupta 2020-06-29 1625 device_wakeup_disable(dev_d);
ada8a8a13b13a2 drivers/mfd/rtsx_pcr.c Wei WANG 2012-10-29 1626
ada8a8a13b13a2 drivers/mfd/rtsx_pcr.c Wei WANG 2012-10-29 1627 mutex_unlock(&pcr->pcr_mutex);
5947c167d145f3 drivers/mfd/rtsx_pcr.c Wei WANG 2013-08-20 1628 return 0;
ada8a8a13b13a2 drivers/mfd/rtsx_pcr.c Wei WANG 2012-10-29 1629 }
ada8a8a13b13a2 drivers/mfd/rtsx_pcr.c Wei WANG 2012-10-29 1630
:::::: The code at line 1623 was first introduced by commit
:::::: 5947c167d145f32d4475d647a87e2af2699efe45 mfd: rtsx: Add shutdown callback in rtsx_pci_driver
:::::: TO: Wei WANG <wei_wang@realsil.com.cn>
:::::: CC: Samuel Ortiz <sameo@linux.intel.com>
---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all(a)lists.01.org
[-- Attachment #2: config.gz --]
[-- Type: application/gzip, Size: 31140 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [char-misc:char-misc-testing 18/30] drivers/misc/cardreader/rtsx_pcr.c:1623:2: error: implicit declaration of function 'rtsx_pci_power_off'; did you mean
2020-07-01 6:24 [char-misc:char-misc-testing 18/30] drivers/misc/cardreader/rtsx_pcr.c:1623:2: error: implicit declaration of function 'rtsx_pci_power_off'; did you mean kernel test robot
@ 2020-07-01 11:44 ` Greg Kroah-Hartman
0 siblings, 0 replies; 2+ messages in thread
From: Greg Kroah-Hartman @ 2020-07-01 11:44 UTC (permalink / raw)
To: kbuild-all
[-- Attachment #1: Type: text/plain, Size: 1043 bytes --]
On Wed, Jul 01, 2020 at 02:24:34PM +0800, kernel test robot wrote:
> tree: https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git char-misc-testing
> head: ba2104c24aba1fa7e19d53f08c985526a6786d8b
> commit: 6bf23661d4a7a105001ebb4410c1c0a17752fac4 [18/30] cardreader/rtsx_pcr.c: use generic power management
> config: ia64-randconfig-r026-20200630 (attached as .config)
> compiler: ia64-linux-gcc (GCC) 9.3.0
> reproduce (this is a W=1 build):
> wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
> chmod +x ~/bin/make.cross
> git checkout 6bf23661d4a7a105001ebb4410c1c0a17752fac4
> # save the attached .config to linux build tree
> COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross ARCH=ia64
>
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <lkp@intel.com>
>
> All errors (new ones prefixed by >>):
Ugh, will go revert this one now, thanks.
greg k-h
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-07-01 11:44 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-01 6:24 [char-misc:char-misc-testing 18/30] drivers/misc/cardreader/rtsx_pcr.c:1623:2: error: implicit declaration of function 'rtsx_pci_power_off'; did you mean kernel test robot
2020-07-01 11:44 ` Greg Kroah-Hartman
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.