All of lore.kernel.org
 help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>,
	Ludovic Desroches <ludovic.desroches@microchip.com>,
	Stephen Boyd <sboyd@kernel.org>,
	kernel@pengutronix.de,
	Michael Turquette <mturquette@baylibre.com>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] clk: at91: fix possible dead lock in new drivers
Date: Fri, 3 Jul 2020 10:58:55 +0200	[thread overview]
Message-ID: <20200703085855.GD6538@piout.net> (raw)
In-Reply-To: <20200703073236.23923-1-a.fatoum@pengutronix.de>

On 03/07/2020 09:32:35+0200, Ahmad Fatoum wrote:
> syscon_node_to_regmap() will make the created regmap get and enable the
> first clock it can parse from the device tree. This clock is not needed to
> access the registers and should not be enabled at that time.
> 
> Use device_node_to_regmap to resolve this as it looks up the regmap in
> the same list but doesn't care about the clocks. This issue is detected
> by lockdep when booting the sama5d3 with a device tree containing the
> new clk bindings.
> 
> This fix already happened in 6956eb33abb5 ("clk: at91: fix possible
> deadlock") for the drivers that had been migrated to the new clk binding
> back then. This does the same for the new drivers as well.
> 
> Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver")
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
> Only boot tested on the sama5d3.
> ---
>  drivers/clk/at91/at91sam9g45.c | 2 +-
>  drivers/clk/at91/at91sam9n12.c | 2 +-
>  drivers/clk/at91/sam9x60.c     | 2 +-
>  drivers/clk/at91/sama5d3.c     | 2 +-
>  4 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/clk/at91/at91sam9g45.c b/drivers/clk/at91/at91sam9g45.c
> index 9873b583c260..fe9d391adeba 100644
> --- a/drivers/clk/at91/at91sam9g45.c
> +++ b/drivers/clk/at91/at91sam9g45.c
> @@ -111,7 +111,7 @@ static void __init at91sam9g45_pmc_setup(struct device_node *np)
>  		return;
>  	mainxtal_name = of_clk_get_parent_name(np, i);
>  
> -	regmap = syscon_node_to_regmap(np);
> +	regmap = device_node_to_regmap(np);
>  	if (IS_ERR(regmap))
>  		return;
>  
> diff --git a/drivers/clk/at91/at91sam9n12.c b/drivers/clk/at91/at91sam9n12.c
> index 630dc5d87171..4aa97e672bd6 100644
> --- a/drivers/clk/at91/at91sam9n12.c
> +++ b/drivers/clk/at91/at91sam9n12.c
> @@ -124,7 +124,7 @@ static void __init at91sam9n12_pmc_setup(struct device_node *np)
>  		return;
>  	mainxtal_name = of_clk_get_parent_name(np, i);
>  
> -	regmap = syscon_node_to_regmap(np);
> +	regmap = device_node_to_regmap(np);
>  	if (IS_ERR(regmap))
>  		return;
>  
> diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
> index 3e20aa68259f..2b4c67485eee 100644
> --- a/drivers/clk/at91/sam9x60.c
> +++ b/drivers/clk/at91/sam9x60.c
> @@ -178,7 +178,7 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
>  		return;
>  	mainxtal_name = of_clk_get_parent_name(np, i);
>  
> -	regmap = syscon_node_to_regmap(np);
> +	regmap = device_node_to_regmap(np);
>  	if (IS_ERR(regmap))
>  		return;
>  
> diff --git a/drivers/clk/at91/sama5d3.c b/drivers/clk/at91/sama5d3.c
> index 5e4e44dd4c37..5609b04e6565 100644
> --- a/drivers/clk/at91/sama5d3.c
> +++ b/drivers/clk/at91/sama5d3.c
> @@ -121,7 +121,7 @@ static void __init sama5d3_pmc_setup(struct device_node *np)
>  		return;
>  	mainxtal_name = of_clk_get_parent_name(np, i);
>  
> -	regmap = syscon_node_to_regmap(np);
> +	regmap = device_node_to_regmap(np);
>  	if (IS_ERR(regmap))
>  		return;
>  
> -- 
> 2.27.0
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>,
	Michael Turquette <mturquette@baylibre.com>,
	linux-kernel@vger.kernel.org,
	Ludovic Desroches <ludovic.desroches@microchip.com>,
	kernel@pengutronix.de, linux-clk@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] clk: at91: fix possible dead lock in new drivers
Date: Fri, 3 Jul 2020 10:58:55 +0200	[thread overview]
Message-ID: <20200703085855.GD6538@piout.net> (raw)
In-Reply-To: <20200703073236.23923-1-a.fatoum@pengutronix.de>

On 03/07/2020 09:32:35+0200, Ahmad Fatoum wrote:
> syscon_node_to_regmap() will make the created regmap get and enable the
> first clock it can parse from the device tree. This clock is not needed to
> access the registers and should not be enabled at that time.
> 
> Use device_node_to_regmap to resolve this as it looks up the regmap in
> the same list but doesn't care about the clocks. This issue is detected
> by lockdep when booting the sama5d3 with a device tree containing the
> new clk bindings.
> 
> This fix already happened in 6956eb33abb5 ("clk: at91: fix possible
> deadlock") for the drivers that had been migrated to the new clk binding
> back then. This does the same for the new drivers as well.
> 
> Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver")
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

> ---
> Only boot tested on the sama5d3.
> ---
>  drivers/clk/at91/at91sam9g45.c | 2 +-
>  drivers/clk/at91/at91sam9n12.c | 2 +-
>  drivers/clk/at91/sam9x60.c     | 2 +-
>  drivers/clk/at91/sama5d3.c     | 2 +-
>  4 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/clk/at91/at91sam9g45.c b/drivers/clk/at91/at91sam9g45.c
> index 9873b583c260..fe9d391adeba 100644
> --- a/drivers/clk/at91/at91sam9g45.c
> +++ b/drivers/clk/at91/at91sam9g45.c
> @@ -111,7 +111,7 @@ static void __init at91sam9g45_pmc_setup(struct device_node *np)
>  		return;
>  	mainxtal_name = of_clk_get_parent_name(np, i);
>  
> -	regmap = syscon_node_to_regmap(np);
> +	regmap = device_node_to_regmap(np);
>  	if (IS_ERR(regmap))
>  		return;
>  
> diff --git a/drivers/clk/at91/at91sam9n12.c b/drivers/clk/at91/at91sam9n12.c
> index 630dc5d87171..4aa97e672bd6 100644
> --- a/drivers/clk/at91/at91sam9n12.c
> +++ b/drivers/clk/at91/at91sam9n12.c
> @@ -124,7 +124,7 @@ static void __init at91sam9n12_pmc_setup(struct device_node *np)
>  		return;
>  	mainxtal_name = of_clk_get_parent_name(np, i);
>  
> -	regmap = syscon_node_to_regmap(np);
> +	regmap = device_node_to_regmap(np);
>  	if (IS_ERR(regmap))
>  		return;
>  
> diff --git a/drivers/clk/at91/sam9x60.c b/drivers/clk/at91/sam9x60.c
> index 3e20aa68259f..2b4c67485eee 100644
> --- a/drivers/clk/at91/sam9x60.c
> +++ b/drivers/clk/at91/sam9x60.c
> @@ -178,7 +178,7 @@ static void __init sam9x60_pmc_setup(struct device_node *np)
>  		return;
>  	mainxtal_name = of_clk_get_parent_name(np, i);
>  
> -	regmap = syscon_node_to_regmap(np);
> +	regmap = device_node_to_regmap(np);
>  	if (IS_ERR(regmap))
>  		return;
>  
> diff --git a/drivers/clk/at91/sama5d3.c b/drivers/clk/at91/sama5d3.c
> index 5e4e44dd4c37..5609b04e6565 100644
> --- a/drivers/clk/at91/sama5d3.c
> +++ b/drivers/clk/at91/sama5d3.c
> @@ -121,7 +121,7 @@ static void __init sama5d3_pmc_setup(struct device_node *np)
>  		return;
>  	mainxtal_name = of_clk_get_parent_name(np, i);
>  
> -	regmap = syscon_node_to_regmap(np);
> +	regmap = device_node_to_regmap(np);
>  	if (IS_ERR(regmap))
>  		return;
>  
> -- 
> 2.27.0
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-07-03  8:59 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-03  7:32 [PATCH] clk: at91: fix possible dead lock in new drivers Ahmad Fatoum
2020-07-03  7:32 ` Ahmad Fatoum
2020-07-03  8:58 ` Alexandre Belloni [this message]
2020-07-03  8:58   ` Alexandre Belloni
2020-07-24  9:25 ` Stephen Boyd
2020-07-24  9:25   ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200703085855.GD6538@piout.net \
    --to=alexandre.belloni@bootlin.com \
    --cc=a.fatoum@pengutronix.de \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ludovic.desroches@microchip.com \
    --cc=mturquette@baylibre.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.