* [PATCH RESEND] phy: exynos5-usbdrd: Calibrating makes sense only for USB2.0 PHY
[not found] <CGME20200708133811eucas1p1df7b92d7e0ba512c5a7ecdb948edbfcf@eucas1p1.samsung.com>
@ 2020-07-08 13:38 ` Marek Szyprowski
2020-07-08 13:47 ` Krzysztof Kozlowski
2020-07-13 5:13 ` Vinod Koul
0 siblings, 2 replies; 5+ messages in thread
From: Marek Szyprowski @ 2020-07-08 13:38 UTC (permalink / raw)
To: linux-usb, linux-samsung-soc
Cc: linux-kernel, Vinod Koul, Kishon Vijay Abraham I,
Marek Szyprowski, Bartlomiej Zolnierkiewicz, Krzysztof Kozlowski
PHY calibration is needed only for USB2.0 (UTMI) PHY, so skip calling
calibration code when phy_calibrate() is called for USB3.0 (PIPE3) PHY.
Fixes: d8c80bb3b55b ("phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
drivers/phy/samsung/phy-exynos5-usbdrd.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
index 646259bee909..f07edd80d2f3 100644
--- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
@@ -714,7 +714,9 @@ static int exynos5_usbdrd_phy_calibrate(struct phy *phy)
struct phy_usb_instance *inst = phy_get_drvdata(phy);
struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
- return exynos5420_usbdrd_phy_calibrate(phy_drd);
+ if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI)
+ return exynos5420_usbdrd_phy_calibrate(phy_drd);
+ return 0;
}
static const struct phy_ops exynos5_usbdrd_phy_ops = {
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH RESEND] phy: exynos5-usbdrd: Calibrating makes sense only for USB2.0 PHY
2020-07-08 13:38 ` [PATCH RESEND] phy: exynos5-usbdrd: Calibrating makes sense only for USB2.0 PHY Marek Szyprowski
@ 2020-07-08 13:47 ` Krzysztof Kozlowski
2020-07-13 5:13 ` Vinod Koul
1 sibling, 0 replies; 5+ messages in thread
From: Krzysztof Kozlowski @ 2020-07-08 13:47 UTC (permalink / raw)
To: Marek Szyprowski
Cc: linux-usb, linux-samsung-soc, linux-kernel, Vinod Koul,
Kishon Vijay Abraham I, Bartlomiej Zolnierkiewicz
On Wed, Jul 08, 2020 at 03:38:00PM +0200, Marek Szyprowski wrote:
> PHY calibration is needed only for USB2.0 (UTMI) PHY, so skip calling
> calibration code when phy_calibrate() is called for USB3.0 (PIPE3) PHY.
>
> Fixes: d8c80bb3b55b ("phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800")
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
> ---
> drivers/phy/samsung/phy-exynos5-usbdrd.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH RESEND] phy: exynos5-usbdrd: Calibrating makes sense only for USB2.0 PHY
2020-07-08 13:38 ` [PATCH RESEND] phy: exynos5-usbdrd: Calibrating makes sense only for USB2.0 PHY Marek Szyprowski
2020-07-08 13:47 ` Krzysztof Kozlowski
@ 2020-07-13 5:13 ` Vinod Koul
1 sibling, 0 replies; 5+ messages in thread
From: Vinod Koul @ 2020-07-13 5:13 UTC (permalink / raw)
To: Marek Szyprowski
Cc: linux-usb, linux-samsung-soc, linux-kernel,
Kishon Vijay Abraham I, Bartlomiej Zolnierkiewicz,
Krzysztof Kozlowski
On 08-07-20, 15:38, Marek Szyprowski wrote:
> PHY calibration is needed only for USB2.0 (UTMI) PHY, so skip calling
> calibration code when phy_calibrate() is called for USB3.0 (PIPE3) PHY.
Applied, thanks
--
~Vinod
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH RESEND] phy: exynos5-usbdrd: Calibrating makes sense only for USB2.0 PHY
2019-12-13 8:31 ` Marek Szyprowski
@ 2020-01-13 14:02 ` Marek Szyprowski
0 siblings, 0 replies; 5+ messages in thread
From: Marek Szyprowski @ 2020-01-13 14:02 UTC (permalink / raw)
To: linux-usb, linux-samsung-soc
Cc: linux-kernel, Kishon Vijay Abraham I, Bartlomiej Zolnierkiewicz,
Krzysztof Kozlowski
On 13.12.2019 09:31, Marek Szyprowski wrote:
> PHY calibration is needed only for USB2.0 (UTMI) PHY, so skip calling
> calibration code when phy_calibrate() is called for USB3.0 (PIPE3) PHY.
>
> Fixes: d8c80bb3b55b ("phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800")
> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
gentle ping
> ---
> drivers/phy/samsung/phy-exynos5-usbdrd.c | 4 +++-
> 1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
> index 646259bee909..f07edd80d2f3 100644
> --- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
> +++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
> @@ -714,7 +714,9 @@ static int exynos5_usbdrd_phy_calibrate(struct phy *phy)
> struct phy_usb_instance *inst = phy_get_drvdata(phy);
> struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
>
> - return exynos5420_usbdrd_phy_calibrate(phy_drd);
> + if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI)
> + return exynos5420_usbdrd_phy_calibrate(phy_drd);
> + return 0;
> }
>
> static const struct phy_ops exynos5_usbdrd_phy_ops = {
Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH RESEND] phy: exynos5-usbdrd: Calibrating makes sense only for USB2.0 PHY
[not found] <CGME20191213083209eucas1p1459831639297fc7c37089c8fef4e0248@eucas1p1.samsung.com>
@ 2019-12-13 8:31 ` Marek Szyprowski
2020-01-13 14:02 ` Marek Szyprowski
0 siblings, 1 reply; 5+ messages in thread
From: Marek Szyprowski @ 2019-12-13 8:31 UTC (permalink / raw)
To: linux-usb, linux-samsung-soc
Cc: linux-kernel, Kishon Vijay Abraham I, Marek Szyprowski,
Bartlomiej Zolnierkiewicz, Krzysztof Kozlowski
PHY calibration is needed only for USB2.0 (UTMI) PHY, so skip calling
calibration code when phy_calibrate() is called for USB3.0 (PIPE3) PHY.
Fixes: d8c80bb3b55b ("phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
---
drivers/phy/samsung/phy-exynos5-usbdrd.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
index 646259bee909..f07edd80d2f3 100644
--- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
@@ -714,7 +714,9 @@ static int exynos5_usbdrd_phy_calibrate(struct phy *phy)
struct phy_usb_instance *inst = phy_get_drvdata(phy);
struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
- return exynos5420_usbdrd_phy_calibrate(phy_drd);
+ if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI)
+ return exynos5420_usbdrd_phy_calibrate(phy_drd);
+ return 0;
}
static const struct phy_ops exynos5_usbdrd_phy_ops = {
--
2.17.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-07-13 5:13 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <CGME20200708133811eucas1p1df7b92d7e0ba512c5a7ecdb948edbfcf@eucas1p1.samsung.com>
2020-07-08 13:38 ` [PATCH RESEND] phy: exynos5-usbdrd: Calibrating makes sense only for USB2.0 PHY Marek Szyprowski
2020-07-08 13:47 ` Krzysztof Kozlowski
2020-07-13 5:13 ` Vinod Koul
[not found] <CGME20191213083209eucas1p1459831639297fc7c37089c8fef4e0248@eucas1p1.samsung.com>
2019-12-13 8:31 ` Marek Szyprowski
2020-01-13 14:02 ` Marek Szyprowski
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.