* [PATCH v3 0/7] Add initial Keem Bay SoC / Board support
@ 2020-07-14 16:12 ` Daniele Alessandrelli
0 siblings, 0 replies; 24+ messages in thread
From: Daniele Alessandrelli @ 2020-07-14 16:12 UTC (permalink / raw)
To: linux-arm-kernel, SoC Team, Rob Herring, Arnd Bergmann, Olof Johansson
Cc: devicetree, linux-kernel, Jassi Brar, Catalin Marinas,
Will Deacon, Daniele Alessandrelli, Paul J. Murphy, Dinh Nguyen
Hi,
This patch-set adds initial support for a new Intel Movidius SoC code-named
Keem Bay. The SoC couples an ARM Cortex A53 CPU with an Intel Movidius VPU.
This initial patch-set enables only the minimal set of components required
to make the Keem Bay EVM board boot into initramfs.
Changes from v2 to v3:
* Split dt-bindings patch into 3 different patches (SoC/board bindings,
clock bindings, and power domains bindings).
* Added dual license (GPL-2.0-only or BSD-3-Clause) to dt-bindings header
files and DTS files.
Changes from v1 to v2:
* Moved keembay-scmi-mailbox driver to a separate patchset
* Removed Keem Bay SCMI mailbox and SCMI node from Keem Bay SoC device tree
Regards,
Daniele
Daniele Alessandrelli (7):
arm64: Add config for Keem Bay SoC
dt-bindings: arm: Add Keem Bay bindings
dt-bindings: clock: Add Keem Bay clock IDs
dt-bindings: power: Add Keem Bay power domains
MAINTAINERS: Add maintainers for Keem Bay SoC
arm64: dts: keembay: Add device tree for Keem Bay SoC
arm64: dts: keembay: Add device tree for Keem Bay EVM board
.../devicetree/bindings/arm/keembay.yaml | 19 ++
MAINTAINERS | 10 +
arch/arm64/Kconfig.platforms | 5 +
arch/arm64/boot/dts/intel/Makefile | 1 +
arch/arm64/boot/dts/intel/keembay-evm.dts | 39 ++++
arch/arm64/boot/dts/intel/keembay-soc.dtsi | 125 ++++++++++++
include/dt-bindings/clock/keembay-clocks.h | 188 ++++++++++++++++++
include/dt-bindings/power/keembay-power.h | 19 ++
8 files changed, 406 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/keembay.yaml
create mode 100644 arch/arm64/boot/dts/intel/keembay-evm.dts
create mode 100644 arch/arm64/boot/dts/intel/keembay-soc.dtsi
create mode 100644 include/dt-bindings/clock/keembay-clocks.h
create mode 100644 include/dt-bindings/power/keembay-power.h
--
2.26.2
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v3 0/7] Add initial Keem Bay SoC / Board support
@ 2020-07-14 16:12 ` Daniele Alessandrelli
0 siblings, 0 replies; 24+ messages in thread
From: Daniele Alessandrelli @ 2020-07-14 16:12 UTC (permalink / raw)
To: linux-arm-kernel, SoC Team, Rob Herring, Arnd Bergmann, Olof Johansson
Cc: devicetree, Catalin Marinas, Jassi Brar, linux-kernel,
Dinh Nguyen, Paul J. Murphy, Will Deacon, Daniele Alessandrelli
Hi,
This patch-set adds initial support for a new Intel Movidius SoC code-named
Keem Bay. The SoC couples an ARM Cortex A53 CPU with an Intel Movidius VPU.
This initial patch-set enables only the minimal set of components required
to make the Keem Bay EVM board boot into initramfs.
Changes from v2 to v3:
* Split dt-bindings patch into 3 different patches (SoC/board bindings,
clock bindings, and power domains bindings).
* Added dual license (GPL-2.0-only or BSD-3-Clause) to dt-bindings header
files and DTS files.
Changes from v1 to v2:
* Moved keembay-scmi-mailbox driver to a separate patchset
* Removed Keem Bay SCMI mailbox and SCMI node from Keem Bay SoC device tree
Regards,
Daniele
Daniele Alessandrelli (7):
arm64: Add config for Keem Bay SoC
dt-bindings: arm: Add Keem Bay bindings
dt-bindings: clock: Add Keem Bay clock IDs
dt-bindings: power: Add Keem Bay power domains
MAINTAINERS: Add maintainers for Keem Bay SoC
arm64: dts: keembay: Add device tree for Keem Bay SoC
arm64: dts: keembay: Add device tree for Keem Bay EVM board
.../devicetree/bindings/arm/keembay.yaml | 19 ++
MAINTAINERS | 10 +
arch/arm64/Kconfig.platforms | 5 +
arch/arm64/boot/dts/intel/Makefile | 1 +
arch/arm64/boot/dts/intel/keembay-evm.dts | 39 ++++
arch/arm64/boot/dts/intel/keembay-soc.dtsi | 125 ++++++++++++
include/dt-bindings/clock/keembay-clocks.h | 188 ++++++++++++++++++
include/dt-bindings/power/keembay-power.h | 19 ++
8 files changed, 406 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/keembay.yaml
create mode 100644 arch/arm64/boot/dts/intel/keembay-evm.dts
create mode 100644 arch/arm64/boot/dts/intel/keembay-soc.dtsi
create mode 100644 include/dt-bindings/clock/keembay-clocks.h
create mode 100644 include/dt-bindings/power/keembay-power.h
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* [PATCH v3 1/7] arm64: Add config for Keem Bay SoC
2020-07-14 16:12 ` Daniele Alessandrelli
@ 2020-07-14 16:12 ` Daniele Alessandrelli
-1 siblings, 0 replies; 24+ messages in thread
From: Daniele Alessandrelli @ 2020-07-14 16:12 UTC (permalink / raw)
To: linux-arm-kernel, SoC Team, Rob Herring, Arnd Bergmann, Olof Johansson
Cc: Daniele Alessandrelli, devicetree, linux-kernel, Jassi Brar,
Catalin Marinas, Will Deacon, Paul J. Murphy, Dinh Nguyen
From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Add ARCH_KEEMBAY configuration option to support Intel Movidius SoC
code-named Keem Bay.
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
---
arch/arm64/Kconfig.platforms | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 8dd05b2a925c..95c1b9042009 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -121,6 +121,11 @@ config ARCH_HISI
help
This enables support for Hisilicon ARMv8 SoC family
+config ARCH_KEEMBAY
+ bool "Keem Bay SoC"
+ help
+ This enables support for Intel Movidius SoC code-named Keem Bay.
+
config ARCH_MEDIATEK
bool "MediaTek SoC Family"
select ARM_GIC
--
2.26.2
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v3 1/7] arm64: Add config for Keem Bay SoC
@ 2020-07-14 16:12 ` Daniele Alessandrelli
0 siblings, 0 replies; 24+ messages in thread
From: Daniele Alessandrelli @ 2020-07-14 16:12 UTC (permalink / raw)
To: linux-arm-kernel, SoC Team, Rob Herring, Arnd Bergmann, Olof Johansson
Cc: devicetree, Catalin Marinas, Jassi Brar, linux-kernel,
Dinh Nguyen, Paul J. Murphy, Will Deacon, Daniele Alessandrelli
From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Add ARCH_KEEMBAY configuration option to support Intel Movidius SoC
code-named Keem Bay.
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
---
arch/arm64/Kconfig.platforms | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 8dd05b2a925c..95c1b9042009 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -121,6 +121,11 @@ config ARCH_HISI
help
This enables support for Hisilicon ARMv8 SoC family
+config ARCH_KEEMBAY
+ bool "Keem Bay SoC"
+ help
+ This enables support for Intel Movidius SoC code-named Keem Bay.
+
config ARCH_MEDIATEK
bool "MediaTek SoC Family"
select ARM_GIC
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v3 2/7] dt-bindings: arm: Add Keem Bay bindings
2020-07-14 16:12 ` Daniele Alessandrelli
@ 2020-07-14 16:13 ` Daniele Alessandrelli
-1 siblings, 0 replies; 24+ messages in thread
From: Daniele Alessandrelli @ 2020-07-14 16:13 UTC (permalink / raw)
To: linux-arm-kernel, SoC Team, Rob Herring, Arnd Bergmann, Olof Johansson
Cc: Daniele Alessandrelli, devicetree, linux-kernel, Jassi Brar,
Catalin Marinas, Will Deacon, Paul J. Murphy, Dinh Nguyen
From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Document Intel Movidius SoC code-named Keem Bay, along with the Keem Bay
EVM board.
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
---
.../devicetree/bindings/arm/keembay.yaml | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/keembay.yaml
diff --git a/Documentation/devicetree/bindings/arm/keembay.yaml b/Documentation/devicetree/bindings/arm/keembay.yaml
new file mode 100644
index 000000000000..f81b110046ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/keembay.yaml
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/keembay.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Keem Bay platform device tree bindings
+
+maintainers:
+ - Paul J. Murphy <paul.j.murphy@intel.com>
+ - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - intel,keembay-evm
+ - const: intel,keembay
+...
--
2.26.2
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v3 2/7] dt-bindings: arm: Add Keem Bay bindings
@ 2020-07-14 16:13 ` Daniele Alessandrelli
0 siblings, 0 replies; 24+ messages in thread
From: Daniele Alessandrelli @ 2020-07-14 16:13 UTC (permalink / raw)
To: linux-arm-kernel, SoC Team, Rob Herring, Arnd Bergmann, Olof Johansson
Cc: devicetree, Catalin Marinas, Jassi Brar, linux-kernel,
Dinh Nguyen, Paul J. Murphy, Will Deacon, Daniele Alessandrelli
From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Document Intel Movidius SoC code-named Keem Bay, along with the Keem Bay
EVM board.
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
---
.../devicetree/bindings/arm/keembay.yaml | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/keembay.yaml
diff --git a/Documentation/devicetree/bindings/arm/keembay.yaml b/Documentation/devicetree/bindings/arm/keembay.yaml
new file mode 100644
index 000000000000..f81b110046ca
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/keembay.yaml
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/keembay.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Keem Bay platform device tree bindings
+
+maintainers:
+ - Paul J. Murphy <paul.j.murphy@intel.com>
+ - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - intel,keembay-evm
+ - const: intel,keembay
+...
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v3 3/7] dt-bindings: clock: Add Keem Bay clock IDs
2020-07-14 16:12 ` Daniele Alessandrelli
@ 2020-07-14 16:13 ` Daniele Alessandrelli
-1 siblings, 0 replies; 24+ messages in thread
From: Daniele Alessandrelli @ 2020-07-14 16:13 UTC (permalink / raw)
To: linux-arm-kernel, SoC Team, Rob Herring, Arnd Bergmann, Olof Johansson
Cc: Daniele Alessandrelli, devicetree, linux-kernel, Jassi Brar,
Catalin Marinas, Will Deacon, Paul J. Murphy, Dinh Nguyen
From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Add clock dt-bindings for Keem Bay SoC.
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
---
include/dt-bindings/clock/keembay-clocks.h | 188 +++++++++++++++++++++
1 file changed, 188 insertions(+)
create mode 100644 include/dt-bindings/clock/keembay-clocks.h
diff --git a/include/dt-bindings/clock/keembay-clocks.h b/include/dt-bindings/clock/keembay-clocks.h
new file mode 100644
index 000000000000..4ad6616ee8e0
--- /dev/null
+++ b/include/dt-bindings/clock/keembay-clocks.h
@@ -0,0 +1,188 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
+/*
+ * Copyright (c) 2020 Intel Corporation.
+ *
+ * Device tree defines for clocks in Keem Bay.
+ */
+
+#ifndef __DT_BINDINGS_KEEMBAY_CLOCKS_H
+#define __DT_BINDINGS_KEEMBAY_CLOCKS_H
+
+/* CPR_PLL region. CLK_ID: 0 - 11 */
+#define KEEM_BAY_A53_PLL_START_ID (0)
+#define KEEM_BAY_A53_PLL_0_OUT_0 (KEEM_BAY_A53_PLL_START_ID + 0)
+#define KEEM_BAY_A53_PLL_0_OUT_1 (KEEM_BAY_A53_PLL_START_ID + 1)
+#define KEEM_BAY_A53_PLL_0_OUT_2 (KEEM_BAY_A53_PLL_START_ID + 2)
+#define KEEM_BAY_A53_PLL_0_OUT_3 (KEEM_BAY_A53_PLL_START_ID + 3)
+#define KEEM_BAY_A53_PLL_1_OUT_0 (KEEM_BAY_A53_PLL_START_ID + 4)
+#define KEEM_BAY_A53_PLL_1_OUT_1 (KEEM_BAY_A53_PLL_START_ID + 5)
+#define KEEM_BAY_A53_PLL_1_OUT_2 (KEEM_BAY_A53_PLL_START_ID + 6)
+#define KEEM_BAY_A53_PLL_1_OUT_3 (KEEM_BAY_A53_PLL_START_ID + 7)
+#define KEEM_BAY_A53_PLL_2_OUT_0 (KEEM_BAY_A53_PLL_START_ID + 8)
+#define KEEM_BAY_A53_PLL_2_OUT_1 (KEEM_BAY_A53_PLL_START_ID + 9)
+#define KEEM_BAY_A53_PLL_2_OUT_2 (KEEM_BAY_A53_PLL_START_ID + 10)
+#define KEEM_BAY_A53_PLL_2_OUT_3 (KEEM_BAY_A53_PLL_START_ID + 11)
+#define KEEM_BAY_A53_PLL_MAX_ID (KEEM_BAY_A53_PLL_2_OUT_3)
+
+/* A53_CPR region. CLK_ID: 12 - 30 */
+#define KEEM_BAY_A53_START_ID (KEEM_BAY_A53_PLL_MAX_ID + 1)
+#define KEEM_BAY_A53_AON (KEEM_BAY_A53_START_ID + 0)
+#define KEEM_BAY_A53_NOC (KEEM_BAY_A53_START_ID + 1)
+#define KEEM_BAY_A53_FUSE (KEEM_BAY_A53_START_ID + 2)
+#define KEEM_BAY_A53_ROM (KEEM_BAY_A53_START_ID + 3)
+#define KEEM_BAY_A53_ICB (KEEM_BAY_A53_START_ID + 4)
+#define KEEM_BAY_A53_GIC (KEEM_BAY_A53_START_ID + 5)
+#define KEEM_BAY_A53_TIM (KEEM_BAY_A53_START_ID + 6)
+#define KEEM_BAY_A53_GPIO (KEEM_BAY_A53_START_ID + 7)
+#define KEEM_BAY_A53_JTAG (KEEM_BAY_A53_START_ID + 8)
+#define KEEM_BAY_A53_MBIST_0 (KEEM_BAY_A53_START_ID + 9)
+#define KEEM_BAY_A53_DSS (KEEM_BAY_A53_START_ID + 10)
+#define KEEM_BAY_A53_MSS (KEEM_BAY_A53_START_ID + 11)
+#define KEEM_BAY_A53_PSS (KEEM_BAY_A53_START_ID + 12)
+#define KEEM_BAY_A53_PCIE (KEEM_BAY_A53_START_ID + 13)
+#define KEEM_BAY_A53_VENC (KEEM_BAY_A53_START_ID + 14)
+#define KEEM_BAY_A53_VDEC (KEEM_BAY_A53_START_ID + 15)
+#define KEEM_BAY_A53_MBIST_1 (KEEM_BAY_A53_START_ID + 16)
+#define KEEM_BAY_A53_MBIST_2 (KEEM_BAY_A53_START_ID + 17)
+#define KEEM_BAY_A53_MBIST_3 (KEEM_BAY_A53_START_ID + 18)
+#define KEEM_BAY_A53_MAX_ID (KEEM_BAY_A53_MBIST_3)
+
+/* A53_CPR_AUX region. CLK_ID: 31 - 57 */
+#define KEEM_BAY_A53_AUX_START_ID (KEEM_BAY_A53_MAX_ID + 1)
+#define KEEM_BAY_A53_AUX_32KHZ (KEEM_BAY_A53_AUX_START_ID + 0)
+#define KEEM_BAY_A53_AUX_CPR (KEEM_BAY_A53_AUX_START_ID + 1)
+#define KEEM_BAY_A53_AUX_TSENS (KEEM_BAY_A53_AUX_START_ID + 2)
+#define KEEM_BAY_A53_AUX_GPIO0 (KEEM_BAY_A53_AUX_START_ID + 3)
+#define KEEM_BAY_A53_AUX_GPIO1 (KEEM_BAY_A53_AUX_START_ID + 4)
+#define KEEM_BAY_A53_AUX_GPIO2 (KEEM_BAY_A53_AUX_START_ID + 5)
+#define KEEM_BAY_A53_AUX_GPIO3 (KEEM_BAY_A53_AUX_START_ID + 6)
+#define KEEM_BAY_A53_AUX_DDR_REF (KEEM_BAY_A53_AUX_START_ID + 7)
+#define KEEM_BAY_A53_AUX_DDR_REF_BYPASS (KEEM_BAY_A53_AUX_START_ID + 8)
+#define KEEM_BAY_A53_AUX_RESERVED1 (KEEM_BAY_A53_AUX_START_ID + 9)
+#define KEEM_BAY_A53_AUX_VENC (KEEM_BAY_A53_AUX_START_ID + 10)
+#define KEEM_BAY_A53_AUX_VDEC (KEEM_BAY_A53_AUX_START_ID + 11)
+#define KEEM_BAY_A53_AUX_USOC_USB_CTRL (KEEM_BAY_A53_AUX_START_ID + 12)
+#define KEEM_BAY_A53_AUX_USB (KEEM_BAY_A53_AUX_START_ID + 13)
+#define KEEM_BAY_A53_AUX_USB_REF (KEEM_BAY_A53_AUX_START_ID + 14)
+#define KEEM_BAY_A53_AUX_USB_ALT_REF (KEEM_BAY_A53_AUX_START_ID + 15)
+#define KEEM_BAY_A53_AUX_USB_SUSPEND (KEEM_BAY_A53_AUX_START_ID + 16)
+#define KEEM_BAY_A53_AUX_RESERVED2 (KEEM_BAY_A53_AUX_START_ID + 17)
+#define KEEM_BAY_A53_AUX_PCIE (KEEM_BAY_A53_AUX_START_ID + 18)
+#define KEEM_BAY_A53_AUX_DBG_CLK (KEEM_BAY_A53_AUX_START_ID + 19)
+#define KEEM_BAY_A53_AUX_DBG_TRACE (KEEM_BAY_A53_AUX_START_ID + 20)
+#define KEEM_BAY_A53_AUX_DBG_DAP (KEEM_BAY_A53_AUX_START_ID + 21)
+#define KEEM_BAY_A53_AUX_ARM_CLKIN (KEEM_BAY_A53_AUX_START_ID + 22)
+#define KEEM_BAY_A53_AUX_ARM_AXI (KEEM_BAY_A53_AUX_START_ID + 23)
+#define KEEM_BAY_A53_AUX_USOC (KEEM_BAY_A53_AUX_START_ID + 24)
+#define KEEM_BAY_A53_AUX_USOC_REF (KEEM_BAY_A53_AUX_START_ID + 25)
+#define KEEM_BAY_A53_AUX_USOC_ALT_REF (KEEM_BAY_A53_AUX_START_ID + 26)
+#define KEEM_BAY_A53_AUX_MAX_ID (KEEM_BAY_A53_AUX_USOC_ALT_REF)
+
+/* PSS_CPR region CLK_ID: CLK_ID: 58 - 82 */
+#define KEEM_BAY_PSS_START_ID (KEEM_BAY_A53_AUX_MAX_ID + 1)
+#define KEEM_BAY_PSS_I2C0 (KEEM_BAY_PSS_START_ID + 0)
+#define KEEM_BAY_PSS_I2C1 (KEEM_BAY_PSS_START_ID + 1)
+#define KEEM_BAY_PSS_I2C2 (KEEM_BAY_PSS_START_ID + 2)
+#define KEEM_BAY_PSS_I2C3 (KEEM_BAY_PSS_START_ID + 3)
+#define KEEM_BAY_PSS_I2C4 (KEEM_BAY_PSS_START_ID + 4)
+#define KEEM_BAY_PSS_SD0 (KEEM_BAY_PSS_START_ID + 5)
+#define KEEM_BAY_PSS_SD1 (KEEM_BAY_PSS_START_ID + 6)
+#define KEEM_BAY_PSS_EMMC (KEEM_BAY_PSS_START_ID + 7)
+#define KEEM_BAY_PSS_AXI_DMA (KEEM_BAY_PSS_START_ID + 8)
+#define KEEM_BAY_PSS_SPI0 (KEEM_BAY_PSS_START_ID + 9)
+#define KEEM_BAY_PSS_SPI1 (KEEM_BAY_PSS_START_ID + 10)
+#define KEEM_BAY_PSS_SPI2 (KEEM_BAY_PSS_START_ID + 11)
+#define KEEM_BAY_PSS_SPI3 (KEEM_BAY_PSS_START_ID + 12)
+#define KEEM_BAY_PSS_I2S0 (KEEM_BAY_PSS_START_ID + 13)
+#define KEEM_BAY_PSS_I2S1 (KEEM_BAY_PSS_START_ID + 14)
+#define KEEM_BAY_PSS_I2S2 (KEEM_BAY_PSS_START_ID + 15)
+#define KEEM_BAY_PSS_I2S3 (KEEM_BAY_PSS_START_ID + 16)
+#define KEEM_BAY_PSS_UART0 (KEEM_BAY_PSS_START_ID + 17)
+#define KEEM_BAY_PSS_UART1 (KEEM_BAY_PSS_START_ID + 18)
+#define KEEM_BAY_PSS_UART2 (KEEM_BAY_PSS_START_ID + 19)
+#define KEEM_BAY_PSS_UART3 (KEEM_BAY_PSS_START_ID + 20)
+#define KEEM_BAY_PSS_I3C0 (KEEM_BAY_PSS_START_ID + 21)
+#define KEEM_BAY_PSS_I3C1 (KEEM_BAY_PSS_START_ID + 22)
+#define KEEM_BAY_PSS_I3C2 (KEEM_BAY_PSS_START_ID + 23)
+#define KEEM_BAY_PSS_GBE (KEEM_BAY_PSS_START_ID + 24)
+#define KEEM_BAY_PSS_MAX_ID (KEEM_BAY_PSS_GBE)
+
+/* PSS_CPR_AUX region. CLK_ID: 83 - 97 */
+#define KEEM_BAY_PSS_AUX_START_ID (KEEM_BAY_PSS_MAX_ID + 1)
+#define KEEM_BAY_PSS_AUX_I2S0 (KEEM_BAY_PSS_AUX_START_ID + 0)
+#define KEEM_BAY_PSS_AUX_I2S1 (KEEM_BAY_PSS_AUX_START_ID + 1)
+#define KEEM_BAY_PSS_AUX_I2S2 (KEEM_BAY_PSS_AUX_START_ID + 2)
+#define KEEM_BAY_PSS_AUX_I2S3 (KEEM_BAY_PSS_AUX_START_ID + 3)
+#define KEEM_BAY_PSS_AUX_UART0 (KEEM_BAY_PSS_AUX_START_ID + 4)
+#define KEEM_BAY_PSS_AUX_UART1 (KEEM_BAY_PSS_AUX_START_ID + 5)
+#define KEEM_BAY_PSS_AUX_UART2 (KEEM_BAY_PSS_AUX_START_ID + 6)
+#define KEEM_BAY_PSS_AUX_UART3 (KEEM_BAY_PSS_AUX_START_ID + 7)
+#define KEEM_BAY_PSS_AUX_SD0 (KEEM_BAY_PSS_AUX_START_ID + 8)
+#define KEEM_BAY_PSS_AUX_SD1 (KEEM_BAY_PSS_AUX_START_ID + 9)
+#define KEEM_BAY_PSS_AUX_EMMC (KEEM_BAY_PSS_AUX_START_ID + 10)
+#define KEEM_BAY_PSS_AUX_TRNG (KEEM_BAY_PSS_AUX_START_ID + 11)
+#define KEEM_BAY_PSS_AUX_OCS (KEEM_BAY_PSS_AUX_START_ID + 12)
+#define KEEM_BAY_PSS_AUX_GBE_PTP (KEEM_BAY_PSS_AUX_START_ID + 13)
+#define KEEM_BAY_PSS_AUX_GBE_TX (KEEM_BAY_PSS_AUX_START_ID + 14)
+#define KEEM_BAY_PSS_AUX_MAX_ID (KEEM_BAY_PSS_AUX_GBE_TX)
+
+/* DSS_CPR region. CLK_ID: 98 - 109 */
+#define KEEM_BAY_DSS_START_ID (KEEM_BAY_PSS_AUX_MAX_ID + 1)
+#define KEEM_BAY_DSS_SYS (KEEM_BAY_DSS_START_ID + 0)
+#define KEEM_BAY_DSS_DEC400 (KEEM_BAY_DSS_START_ID + 1)
+#define KEEM_BAY_DSS_TSENSE (KEEM_BAY_DSS_START_ID + 2)
+#define KEEM_BAY_DSS_BUS_0 (KEEM_BAY_DSS_START_ID + 3)
+#define KEEM_BAY_DSS_CORE_0 (KEEM_BAY_DSS_START_ID + 4)
+#define KEEM_BAY_DSS_REF_0 (KEEM_BAY_DSS_START_ID + 5)
+#define KEEM_BAY_DSS_REF_BYP_0 (KEEM_BAY_DSS_START_ID + 6)
+#define KEEM_BAY_DSS_BUS_1 (KEEM_BAY_DSS_START_ID + 7)
+#define KEEM_BAY_DSS_CORE_1 (KEEM_BAY_DSS_START_ID + 8)
+#define KEEM_BAY_DSS_REF_1 (KEEM_BAY_DSS_START_ID + 9)
+#define KEEM_BAY_DSS_REF_BYP_1 (KEEM_BAY_DSS_START_ID + 10)
+#define KEEM_BAY_DSS_MMU500 (KEEM_BAY_DSS_START_ID + 11)
+#define KEEM_BAY_DSS_MAX_ID (KEEM_BAY_DSS_MMU500)
+
+/* USS_CPR region. CLK_ID: 110 - 116 */
+#define KEEM_BAY_USS_START_ID (KEEM_BAY_DSS_MAX_ID + 1)
+#define KEEM_BAY_USS_SYS (KEEM_BAY_USS_START_ID + 0)
+#define KEEM_BAY_USS_REF (KEEM_BAY_USS_START_ID + 1)
+#define KEEM_BAY_USS_ALT_REF (KEEM_BAY_USS_START_ID + 2)
+#define KEEM_BAY_USS_SUSPEND (KEEM_BAY_USS_START_ID + 3)
+#define KEEM_BAY_USS_CORE (KEEM_BAY_USS_START_ID + 4)
+#define KEEM_BAY_USS_LOW_JIT (KEEM_BAY_USS_START_ID + 5)
+#define KEEM_BAY_USS_PHY_TST (KEEM_BAY_USS_START_ID + 6)
+#define KEEM_BAY_USS_MAX_ID (KEEM_BAY_USS_PHY_TST)
+
+/* MSS_CPR region. CLK_ID: 117 - 129 */
+#define KEEM_BAY_MSS_START_ID (KEEM_BAY_USS_MAX_ID + 1)
+#define KEEM_BAY_MSS_CPU (KEEM_BAY_MSS_START_ID + 0)
+#define KEEM_BAY_MSS_CPU_DSU (KEEM_BAY_MSS_START_ID + 1)
+#define KEEM_BAY_MSS_CPU_L2C (KEEM_BAY_MSS_START_ID + 2)
+#define KEEM_BAY_MSS_CPU_ICB (KEEM_BAY_MSS_START_ID + 3)
+#define KEEM_BAY_MSS_CPU_TIM (KEEM_BAY_MSS_START_ID + 4)
+#define KEEM_BAY_MSS_JPGENC (KEEM_BAY_MSS_START_ID + 5)
+#define KEEM_BAY_MSS_DTB (KEEM_BAY_MSS_START_ID + 6)
+#define KEEM_BAY_MSS_BLT (KEEM_BAY_MSS_START_ID + 7)
+#define KEEM_BAY_MSS_UPA (KEEM_BAY_MSS_START_ID + 8)
+#define KEEM_BAY_MSS_NCE (KEEM_BAY_MSS_START_ID + 9)
+#define KEEM_BAY_MSS_CV (KEEM_BAY_MSS_START_ID + 10)
+#define KEEM_BAY_MSS_ISP (KEEM_BAY_MSS_START_ID + 11)
+#define KEEM_BAY_MSS_CAM (KEEM_BAY_MSS_START_ID + 12)
+#define KEEM_BAY_MSS_MAX_ID (KEEM_BAY_MSS_CAM)
+
+/* MSS_CPR_AUX region. CLK_ID: 130 - 138 */
+#define KEEM_BAY_MSS_AUX_START_ID (KEEM_BAY_MSS_MAX_ID + 1)
+#define KEEM_BAY_MSS_AUX_CIF (KEEM_BAY_MSS_AUX_START_ID + 0)
+#define KEEM_BAY_MSS_AUX_LCD (KEEM_BAY_MSS_AUX_START_ID + 1)
+#define KEEM_BAY_MSS_AUX_SLVDS0 (KEEM_BAY_MSS_AUX_START_ID + 2)
+#define KEEM_BAY_MSS_AUX_SLVDS1 (KEEM_BAY_MSS_AUX_START_ID + 3)
+#define KEEM_BAY_MSS_AUX_MIPI_TX0 (KEEM_BAY_MSS_AUX_START_ID + 4)
+#define KEEM_BAY_MSS_AUX_MIPI_TX1 (KEEM_BAY_MSS_AUX_START_ID + 5)
+#define KEEM_BAY_MSS_AUX_MIPI_ECFG (KEEM_BAY_MSS_AUX_START_ID + 6)
+#define KEEM_BAY_MSS_AUX_MIPI_CFG (KEEM_BAY_MSS_AUX_START_ID + 7)
+#define KEEM_BAY_MSS_AUX_JPGENC (KEEM_BAY_MSS_AUX_START_ID + 8)
+#define KEEM_BAY_MSS_AUX_MAX_ID (KEEM_BAY_MSS_AUX_JPGENC)
+
+#define KEEM_BAY_NUM_CLOCKS (KEEM_BAY_MSS_AUX_MAX_ID + 1)
+
+#endif /* __DT_BINDINGS_KEEMBAY_CLOCKS_H */
--
2.26.2
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v3 3/7] dt-bindings: clock: Add Keem Bay clock IDs
@ 2020-07-14 16:13 ` Daniele Alessandrelli
0 siblings, 0 replies; 24+ messages in thread
From: Daniele Alessandrelli @ 2020-07-14 16:13 UTC (permalink / raw)
To: linux-arm-kernel, SoC Team, Rob Herring, Arnd Bergmann, Olof Johansson
Cc: devicetree, Catalin Marinas, Jassi Brar, linux-kernel,
Dinh Nguyen, Paul J. Murphy, Will Deacon, Daniele Alessandrelli
From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Add clock dt-bindings for Keem Bay SoC.
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
---
include/dt-bindings/clock/keembay-clocks.h | 188 +++++++++++++++++++++
1 file changed, 188 insertions(+)
create mode 100644 include/dt-bindings/clock/keembay-clocks.h
diff --git a/include/dt-bindings/clock/keembay-clocks.h b/include/dt-bindings/clock/keembay-clocks.h
new file mode 100644
index 000000000000..4ad6616ee8e0
--- /dev/null
+++ b/include/dt-bindings/clock/keembay-clocks.h
@@ -0,0 +1,188 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
+/*
+ * Copyright (c) 2020 Intel Corporation.
+ *
+ * Device tree defines for clocks in Keem Bay.
+ */
+
+#ifndef __DT_BINDINGS_KEEMBAY_CLOCKS_H
+#define __DT_BINDINGS_KEEMBAY_CLOCKS_H
+
+/* CPR_PLL region. CLK_ID: 0 - 11 */
+#define KEEM_BAY_A53_PLL_START_ID (0)
+#define KEEM_BAY_A53_PLL_0_OUT_0 (KEEM_BAY_A53_PLL_START_ID + 0)
+#define KEEM_BAY_A53_PLL_0_OUT_1 (KEEM_BAY_A53_PLL_START_ID + 1)
+#define KEEM_BAY_A53_PLL_0_OUT_2 (KEEM_BAY_A53_PLL_START_ID + 2)
+#define KEEM_BAY_A53_PLL_0_OUT_3 (KEEM_BAY_A53_PLL_START_ID + 3)
+#define KEEM_BAY_A53_PLL_1_OUT_0 (KEEM_BAY_A53_PLL_START_ID + 4)
+#define KEEM_BAY_A53_PLL_1_OUT_1 (KEEM_BAY_A53_PLL_START_ID + 5)
+#define KEEM_BAY_A53_PLL_1_OUT_2 (KEEM_BAY_A53_PLL_START_ID + 6)
+#define KEEM_BAY_A53_PLL_1_OUT_3 (KEEM_BAY_A53_PLL_START_ID + 7)
+#define KEEM_BAY_A53_PLL_2_OUT_0 (KEEM_BAY_A53_PLL_START_ID + 8)
+#define KEEM_BAY_A53_PLL_2_OUT_1 (KEEM_BAY_A53_PLL_START_ID + 9)
+#define KEEM_BAY_A53_PLL_2_OUT_2 (KEEM_BAY_A53_PLL_START_ID + 10)
+#define KEEM_BAY_A53_PLL_2_OUT_3 (KEEM_BAY_A53_PLL_START_ID + 11)
+#define KEEM_BAY_A53_PLL_MAX_ID (KEEM_BAY_A53_PLL_2_OUT_3)
+
+/* A53_CPR region. CLK_ID: 12 - 30 */
+#define KEEM_BAY_A53_START_ID (KEEM_BAY_A53_PLL_MAX_ID + 1)
+#define KEEM_BAY_A53_AON (KEEM_BAY_A53_START_ID + 0)
+#define KEEM_BAY_A53_NOC (KEEM_BAY_A53_START_ID + 1)
+#define KEEM_BAY_A53_FUSE (KEEM_BAY_A53_START_ID + 2)
+#define KEEM_BAY_A53_ROM (KEEM_BAY_A53_START_ID + 3)
+#define KEEM_BAY_A53_ICB (KEEM_BAY_A53_START_ID + 4)
+#define KEEM_BAY_A53_GIC (KEEM_BAY_A53_START_ID + 5)
+#define KEEM_BAY_A53_TIM (KEEM_BAY_A53_START_ID + 6)
+#define KEEM_BAY_A53_GPIO (KEEM_BAY_A53_START_ID + 7)
+#define KEEM_BAY_A53_JTAG (KEEM_BAY_A53_START_ID + 8)
+#define KEEM_BAY_A53_MBIST_0 (KEEM_BAY_A53_START_ID + 9)
+#define KEEM_BAY_A53_DSS (KEEM_BAY_A53_START_ID + 10)
+#define KEEM_BAY_A53_MSS (KEEM_BAY_A53_START_ID + 11)
+#define KEEM_BAY_A53_PSS (KEEM_BAY_A53_START_ID + 12)
+#define KEEM_BAY_A53_PCIE (KEEM_BAY_A53_START_ID + 13)
+#define KEEM_BAY_A53_VENC (KEEM_BAY_A53_START_ID + 14)
+#define KEEM_BAY_A53_VDEC (KEEM_BAY_A53_START_ID + 15)
+#define KEEM_BAY_A53_MBIST_1 (KEEM_BAY_A53_START_ID + 16)
+#define KEEM_BAY_A53_MBIST_2 (KEEM_BAY_A53_START_ID + 17)
+#define KEEM_BAY_A53_MBIST_3 (KEEM_BAY_A53_START_ID + 18)
+#define KEEM_BAY_A53_MAX_ID (KEEM_BAY_A53_MBIST_3)
+
+/* A53_CPR_AUX region. CLK_ID: 31 - 57 */
+#define KEEM_BAY_A53_AUX_START_ID (KEEM_BAY_A53_MAX_ID + 1)
+#define KEEM_BAY_A53_AUX_32KHZ (KEEM_BAY_A53_AUX_START_ID + 0)
+#define KEEM_BAY_A53_AUX_CPR (KEEM_BAY_A53_AUX_START_ID + 1)
+#define KEEM_BAY_A53_AUX_TSENS (KEEM_BAY_A53_AUX_START_ID + 2)
+#define KEEM_BAY_A53_AUX_GPIO0 (KEEM_BAY_A53_AUX_START_ID + 3)
+#define KEEM_BAY_A53_AUX_GPIO1 (KEEM_BAY_A53_AUX_START_ID + 4)
+#define KEEM_BAY_A53_AUX_GPIO2 (KEEM_BAY_A53_AUX_START_ID + 5)
+#define KEEM_BAY_A53_AUX_GPIO3 (KEEM_BAY_A53_AUX_START_ID + 6)
+#define KEEM_BAY_A53_AUX_DDR_REF (KEEM_BAY_A53_AUX_START_ID + 7)
+#define KEEM_BAY_A53_AUX_DDR_REF_BYPASS (KEEM_BAY_A53_AUX_START_ID + 8)
+#define KEEM_BAY_A53_AUX_RESERVED1 (KEEM_BAY_A53_AUX_START_ID + 9)
+#define KEEM_BAY_A53_AUX_VENC (KEEM_BAY_A53_AUX_START_ID + 10)
+#define KEEM_BAY_A53_AUX_VDEC (KEEM_BAY_A53_AUX_START_ID + 11)
+#define KEEM_BAY_A53_AUX_USOC_USB_CTRL (KEEM_BAY_A53_AUX_START_ID + 12)
+#define KEEM_BAY_A53_AUX_USB (KEEM_BAY_A53_AUX_START_ID + 13)
+#define KEEM_BAY_A53_AUX_USB_REF (KEEM_BAY_A53_AUX_START_ID + 14)
+#define KEEM_BAY_A53_AUX_USB_ALT_REF (KEEM_BAY_A53_AUX_START_ID + 15)
+#define KEEM_BAY_A53_AUX_USB_SUSPEND (KEEM_BAY_A53_AUX_START_ID + 16)
+#define KEEM_BAY_A53_AUX_RESERVED2 (KEEM_BAY_A53_AUX_START_ID + 17)
+#define KEEM_BAY_A53_AUX_PCIE (KEEM_BAY_A53_AUX_START_ID + 18)
+#define KEEM_BAY_A53_AUX_DBG_CLK (KEEM_BAY_A53_AUX_START_ID + 19)
+#define KEEM_BAY_A53_AUX_DBG_TRACE (KEEM_BAY_A53_AUX_START_ID + 20)
+#define KEEM_BAY_A53_AUX_DBG_DAP (KEEM_BAY_A53_AUX_START_ID + 21)
+#define KEEM_BAY_A53_AUX_ARM_CLKIN (KEEM_BAY_A53_AUX_START_ID + 22)
+#define KEEM_BAY_A53_AUX_ARM_AXI (KEEM_BAY_A53_AUX_START_ID + 23)
+#define KEEM_BAY_A53_AUX_USOC (KEEM_BAY_A53_AUX_START_ID + 24)
+#define KEEM_BAY_A53_AUX_USOC_REF (KEEM_BAY_A53_AUX_START_ID + 25)
+#define KEEM_BAY_A53_AUX_USOC_ALT_REF (KEEM_BAY_A53_AUX_START_ID + 26)
+#define KEEM_BAY_A53_AUX_MAX_ID (KEEM_BAY_A53_AUX_USOC_ALT_REF)
+
+/* PSS_CPR region CLK_ID: CLK_ID: 58 - 82 */
+#define KEEM_BAY_PSS_START_ID (KEEM_BAY_A53_AUX_MAX_ID + 1)
+#define KEEM_BAY_PSS_I2C0 (KEEM_BAY_PSS_START_ID + 0)
+#define KEEM_BAY_PSS_I2C1 (KEEM_BAY_PSS_START_ID + 1)
+#define KEEM_BAY_PSS_I2C2 (KEEM_BAY_PSS_START_ID + 2)
+#define KEEM_BAY_PSS_I2C3 (KEEM_BAY_PSS_START_ID + 3)
+#define KEEM_BAY_PSS_I2C4 (KEEM_BAY_PSS_START_ID + 4)
+#define KEEM_BAY_PSS_SD0 (KEEM_BAY_PSS_START_ID + 5)
+#define KEEM_BAY_PSS_SD1 (KEEM_BAY_PSS_START_ID + 6)
+#define KEEM_BAY_PSS_EMMC (KEEM_BAY_PSS_START_ID + 7)
+#define KEEM_BAY_PSS_AXI_DMA (KEEM_BAY_PSS_START_ID + 8)
+#define KEEM_BAY_PSS_SPI0 (KEEM_BAY_PSS_START_ID + 9)
+#define KEEM_BAY_PSS_SPI1 (KEEM_BAY_PSS_START_ID + 10)
+#define KEEM_BAY_PSS_SPI2 (KEEM_BAY_PSS_START_ID + 11)
+#define KEEM_BAY_PSS_SPI3 (KEEM_BAY_PSS_START_ID + 12)
+#define KEEM_BAY_PSS_I2S0 (KEEM_BAY_PSS_START_ID + 13)
+#define KEEM_BAY_PSS_I2S1 (KEEM_BAY_PSS_START_ID + 14)
+#define KEEM_BAY_PSS_I2S2 (KEEM_BAY_PSS_START_ID + 15)
+#define KEEM_BAY_PSS_I2S3 (KEEM_BAY_PSS_START_ID + 16)
+#define KEEM_BAY_PSS_UART0 (KEEM_BAY_PSS_START_ID + 17)
+#define KEEM_BAY_PSS_UART1 (KEEM_BAY_PSS_START_ID + 18)
+#define KEEM_BAY_PSS_UART2 (KEEM_BAY_PSS_START_ID + 19)
+#define KEEM_BAY_PSS_UART3 (KEEM_BAY_PSS_START_ID + 20)
+#define KEEM_BAY_PSS_I3C0 (KEEM_BAY_PSS_START_ID + 21)
+#define KEEM_BAY_PSS_I3C1 (KEEM_BAY_PSS_START_ID + 22)
+#define KEEM_BAY_PSS_I3C2 (KEEM_BAY_PSS_START_ID + 23)
+#define KEEM_BAY_PSS_GBE (KEEM_BAY_PSS_START_ID + 24)
+#define KEEM_BAY_PSS_MAX_ID (KEEM_BAY_PSS_GBE)
+
+/* PSS_CPR_AUX region. CLK_ID: 83 - 97 */
+#define KEEM_BAY_PSS_AUX_START_ID (KEEM_BAY_PSS_MAX_ID + 1)
+#define KEEM_BAY_PSS_AUX_I2S0 (KEEM_BAY_PSS_AUX_START_ID + 0)
+#define KEEM_BAY_PSS_AUX_I2S1 (KEEM_BAY_PSS_AUX_START_ID + 1)
+#define KEEM_BAY_PSS_AUX_I2S2 (KEEM_BAY_PSS_AUX_START_ID + 2)
+#define KEEM_BAY_PSS_AUX_I2S3 (KEEM_BAY_PSS_AUX_START_ID + 3)
+#define KEEM_BAY_PSS_AUX_UART0 (KEEM_BAY_PSS_AUX_START_ID + 4)
+#define KEEM_BAY_PSS_AUX_UART1 (KEEM_BAY_PSS_AUX_START_ID + 5)
+#define KEEM_BAY_PSS_AUX_UART2 (KEEM_BAY_PSS_AUX_START_ID + 6)
+#define KEEM_BAY_PSS_AUX_UART3 (KEEM_BAY_PSS_AUX_START_ID + 7)
+#define KEEM_BAY_PSS_AUX_SD0 (KEEM_BAY_PSS_AUX_START_ID + 8)
+#define KEEM_BAY_PSS_AUX_SD1 (KEEM_BAY_PSS_AUX_START_ID + 9)
+#define KEEM_BAY_PSS_AUX_EMMC (KEEM_BAY_PSS_AUX_START_ID + 10)
+#define KEEM_BAY_PSS_AUX_TRNG (KEEM_BAY_PSS_AUX_START_ID + 11)
+#define KEEM_BAY_PSS_AUX_OCS (KEEM_BAY_PSS_AUX_START_ID + 12)
+#define KEEM_BAY_PSS_AUX_GBE_PTP (KEEM_BAY_PSS_AUX_START_ID + 13)
+#define KEEM_BAY_PSS_AUX_GBE_TX (KEEM_BAY_PSS_AUX_START_ID + 14)
+#define KEEM_BAY_PSS_AUX_MAX_ID (KEEM_BAY_PSS_AUX_GBE_TX)
+
+/* DSS_CPR region. CLK_ID: 98 - 109 */
+#define KEEM_BAY_DSS_START_ID (KEEM_BAY_PSS_AUX_MAX_ID + 1)
+#define KEEM_BAY_DSS_SYS (KEEM_BAY_DSS_START_ID + 0)
+#define KEEM_BAY_DSS_DEC400 (KEEM_BAY_DSS_START_ID + 1)
+#define KEEM_BAY_DSS_TSENSE (KEEM_BAY_DSS_START_ID + 2)
+#define KEEM_BAY_DSS_BUS_0 (KEEM_BAY_DSS_START_ID + 3)
+#define KEEM_BAY_DSS_CORE_0 (KEEM_BAY_DSS_START_ID + 4)
+#define KEEM_BAY_DSS_REF_0 (KEEM_BAY_DSS_START_ID + 5)
+#define KEEM_BAY_DSS_REF_BYP_0 (KEEM_BAY_DSS_START_ID + 6)
+#define KEEM_BAY_DSS_BUS_1 (KEEM_BAY_DSS_START_ID + 7)
+#define KEEM_BAY_DSS_CORE_1 (KEEM_BAY_DSS_START_ID + 8)
+#define KEEM_BAY_DSS_REF_1 (KEEM_BAY_DSS_START_ID + 9)
+#define KEEM_BAY_DSS_REF_BYP_1 (KEEM_BAY_DSS_START_ID + 10)
+#define KEEM_BAY_DSS_MMU500 (KEEM_BAY_DSS_START_ID + 11)
+#define KEEM_BAY_DSS_MAX_ID (KEEM_BAY_DSS_MMU500)
+
+/* USS_CPR region. CLK_ID: 110 - 116 */
+#define KEEM_BAY_USS_START_ID (KEEM_BAY_DSS_MAX_ID + 1)
+#define KEEM_BAY_USS_SYS (KEEM_BAY_USS_START_ID + 0)
+#define KEEM_BAY_USS_REF (KEEM_BAY_USS_START_ID + 1)
+#define KEEM_BAY_USS_ALT_REF (KEEM_BAY_USS_START_ID + 2)
+#define KEEM_BAY_USS_SUSPEND (KEEM_BAY_USS_START_ID + 3)
+#define KEEM_BAY_USS_CORE (KEEM_BAY_USS_START_ID + 4)
+#define KEEM_BAY_USS_LOW_JIT (KEEM_BAY_USS_START_ID + 5)
+#define KEEM_BAY_USS_PHY_TST (KEEM_BAY_USS_START_ID + 6)
+#define KEEM_BAY_USS_MAX_ID (KEEM_BAY_USS_PHY_TST)
+
+/* MSS_CPR region. CLK_ID: 117 - 129 */
+#define KEEM_BAY_MSS_START_ID (KEEM_BAY_USS_MAX_ID + 1)
+#define KEEM_BAY_MSS_CPU (KEEM_BAY_MSS_START_ID + 0)
+#define KEEM_BAY_MSS_CPU_DSU (KEEM_BAY_MSS_START_ID + 1)
+#define KEEM_BAY_MSS_CPU_L2C (KEEM_BAY_MSS_START_ID + 2)
+#define KEEM_BAY_MSS_CPU_ICB (KEEM_BAY_MSS_START_ID + 3)
+#define KEEM_BAY_MSS_CPU_TIM (KEEM_BAY_MSS_START_ID + 4)
+#define KEEM_BAY_MSS_JPGENC (KEEM_BAY_MSS_START_ID + 5)
+#define KEEM_BAY_MSS_DTB (KEEM_BAY_MSS_START_ID + 6)
+#define KEEM_BAY_MSS_BLT (KEEM_BAY_MSS_START_ID + 7)
+#define KEEM_BAY_MSS_UPA (KEEM_BAY_MSS_START_ID + 8)
+#define KEEM_BAY_MSS_NCE (KEEM_BAY_MSS_START_ID + 9)
+#define KEEM_BAY_MSS_CV (KEEM_BAY_MSS_START_ID + 10)
+#define KEEM_BAY_MSS_ISP (KEEM_BAY_MSS_START_ID + 11)
+#define KEEM_BAY_MSS_CAM (KEEM_BAY_MSS_START_ID + 12)
+#define KEEM_BAY_MSS_MAX_ID (KEEM_BAY_MSS_CAM)
+
+/* MSS_CPR_AUX region. CLK_ID: 130 - 138 */
+#define KEEM_BAY_MSS_AUX_START_ID (KEEM_BAY_MSS_MAX_ID + 1)
+#define KEEM_BAY_MSS_AUX_CIF (KEEM_BAY_MSS_AUX_START_ID + 0)
+#define KEEM_BAY_MSS_AUX_LCD (KEEM_BAY_MSS_AUX_START_ID + 1)
+#define KEEM_BAY_MSS_AUX_SLVDS0 (KEEM_BAY_MSS_AUX_START_ID + 2)
+#define KEEM_BAY_MSS_AUX_SLVDS1 (KEEM_BAY_MSS_AUX_START_ID + 3)
+#define KEEM_BAY_MSS_AUX_MIPI_TX0 (KEEM_BAY_MSS_AUX_START_ID + 4)
+#define KEEM_BAY_MSS_AUX_MIPI_TX1 (KEEM_BAY_MSS_AUX_START_ID + 5)
+#define KEEM_BAY_MSS_AUX_MIPI_ECFG (KEEM_BAY_MSS_AUX_START_ID + 6)
+#define KEEM_BAY_MSS_AUX_MIPI_CFG (KEEM_BAY_MSS_AUX_START_ID + 7)
+#define KEEM_BAY_MSS_AUX_JPGENC (KEEM_BAY_MSS_AUX_START_ID + 8)
+#define KEEM_BAY_MSS_AUX_MAX_ID (KEEM_BAY_MSS_AUX_JPGENC)
+
+#define KEEM_BAY_NUM_CLOCKS (KEEM_BAY_MSS_AUX_MAX_ID + 1)
+
+#endif /* __DT_BINDINGS_KEEMBAY_CLOCKS_H */
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v3 4/7] dt-bindings: power: Add Keem Bay power domains
2020-07-14 16:12 ` Daniele Alessandrelli
@ 2020-07-14 16:13 ` Daniele Alessandrelli
-1 siblings, 0 replies; 24+ messages in thread
From: Daniele Alessandrelli @ 2020-07-14 16:13 UTC (permalink / raw)
To: linux-arm-kernel, SoC Team, Rob Herring, Arnd Bergmann, Olof Johansson
Cc: Daniele Alessandrelli, devicetree, linux-kernel, Jassi Brar,
Catalin Marinas, Will Deacon, Paul J. Murphy, Dinh Nguyen
From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Add power domain dt-bindings for Keem Bay SoC.
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
---
include/dt-bindings/power/keembay-power.h | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
create mode 100644 include/dt-bindings/power/keembay-power.h
diff --git a/include/dt-bindings/power/keembay-power.h b/include/dt-bindings/power/keembay-power.h
new file mode 100644
index 000000000000..1385c42f897d
--- /dev/null
+++ b/include/dt-bindings/power/keembay-power.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
+/*
+ * Copyright (c) 2020 Intel Corporation.
+ *
+ * Device tree defines for power domains in Keem Bay.
+ */
+
+#ifndef __DT_BINDINGS_KEEMBAY_POWER_H
+#define __DT_BINDINGS_KEEMBAY_POWER_H
+
+#define KEEM_BAY_PSS_POWER_DOMAIN 0
+#define KEEM_BAY_MSS_CPU_POWER_DOMAIN 1
+#define KEEM_BAY_VDEC_POWER_DOMAIN 2
+#define KEEM_BAY_VENC_POWER_DOMAIN 3
+#define KEEM_BAY_PCIE_POWER_DOMAIN 4
+#define KEEM_BAY_USS_POWER_DOMAIN 5
+#define KEEM_BAY_MSS_CAM_POWER_DOMAIN 6
+
+#endif /* __DT_BINDINGS_KEEMBAY_POWER_H */
--
2.26.2
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v3 4/7] dt-bindings: power: Add Keem Bay power domains
@ 2020-07-14 16:13 ` Daniele Alessandrelli
0 siblings, 0 replies; 24+ messages in thread
From: Daniele Alessandrelli @ 2020-07-14 16:13 UTC (permalink / raw)
To: linux-arm-kernel, SoC Team, Rob Herring, Arnd Bergmann, Olof Johansson
Cc: devicetree, Catalin Marinas, Jassi Brar, linux-kernel,
Dinh Nguyen, Paul J. Murphy, Will Deacon, Daniele Alessandrelli
From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Add power domain dt-bindings for Keem Bay SoC.
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
---
include/dt-bindings/power/keembay-power.h | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
create mode 100644 include/dt-bindings/power/keembay-power.h
diff --git a/include/dt-bindings/power/keembay-power.h b/include/dt-bindings/power/keembay-power.h
new file mode 100644
index 000000000000..1385c42f897d
--- /dev/null
+++ b/include/dt-bindings/power/keembay-power.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
+/*
+ * Copyright (c) 2020 Intel Corporation.
+ *
+ * Device tree defines for power domains in Keem Bay.
+ */
+
+#ifndef __DT_BINDINGS_KEEMBAY_POWER_H
+#define __DT_BINDINGS_KEEMBAY_POWER_H
+
+#define KEEM_BAY_PSS_POWER_DOMAIN 0
+#define KEEM_BAY_MSS_CPU_POWER_DOMAIN 1
+#define KEEM_BAY_VDEC_POWER_DOMAIN 2
+#define KEEM_BAY_VENC_POWER_DOMAIN 3
+#define KEEM_BAY_PCIE_POWER_DOMAIN 4
+#define KEEM_BAY_USS_POWER_DOMAIN 5
+#define KEEM_BAY_MSS_CAM_POWER_DOMAIN 6
+
+#endif /* __DT_BINDINGS_KEEMBAY_POWER_H */
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v3 5/7] MAINTAINERS: Add maintainers for Keem Bay SoC
2020-07-14 16:12 ` Daniele Alessandrelli
@ 2020-07-14 16:13 ` Daniele Alessandrelli
-1 siblings, 0 replies; 24+ messages in thread
From: Daniele Alessandrelli @ 2020-07-14 16:13 UTC (permalink / raw)
To: linux-arm-kernel, SoC Team, Rob Herring, Arnd Bergmann, Olof Johansson
Cc: Daniele Alessandrelli, devicetree, linux-kernel, Jassi Brar,
Catalin Marinas, Will Deacon, Paul J. Murphy, Dinh Nguyen
From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Add maintainers for the new Intel Movidius SoC code-named Keem Bay.
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
---
MAINTAINERS | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index b4a43a9e7fbc..b151d0fc0588 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1954,6 +1954,14 @@ F: drivers/irqchip/irq-ixp4xx.c
F: include/linux/irqchip/irq-ixp4xx.h
F: include/linux/platform_data/timer-ixp4xx.h
+ARM/INTEL KEEMBAY ARCHITECTURE
+M: Paul J. Murphy <paul.j.murphy@intel.com>
+M: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+S: Maintained
+F: Documentation/devicetree/bindings/arm/keembay.yaml
+F: include/dt-bindings/clock/keembay-clocks.h
+F: include/dt-bindings/power/keembay-power.h
+
ARM/INTEL RESEARCH IMOTE/STARGATE 2 MACHINE SUPPORT
M: Jonathan Cameron <jic23@cam.ac.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
--
2.26.2
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v3 5/7] MAINTAINERS: Add maintainers for Keem Bay SoC
@ 2020-07-14 16:13 ` Daniele Alessandrelli
0 siblings, 0 replies; 24+ messages in thread
From: Daniele Alessandrelli @ 2020-07-14 16:13 UTC (permalink / raw)
To: linux-arm-kernel, SoC Team, Rob Herring, Arnd Bergmann, Olof Johansson
Cc: devicetree, Catalin Marinas, Jassi Brar, linux-kernel,
Dinh Nguyen, Paul J. Murphy, Will Deacon, Daniele Alessandrelli
From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Add maintainers for the new Intel Movidius SoC code-named Keem Bay.
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
---
MAINTAINERS | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index b4a43a9e7fbc..b151d0fc0588 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1954,6 +1954,14 @@ F: drivers/irqchip/irq-ixp4xx.c
F: include/linux/irqchip/irq-ixp4xx.h
F: include/linux/platform_data/timer-ixp4xx.h
+ARM/INTEL KEEMBAY ARCHITECTURE
+M: Paul J. Murphy <paul.j.murphy@intel.com>
+M: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
+S: Maintained
+F: Documentation/devicetree/bindings/arm/keembay.yaml
+F: include/dt-bindings/clock/keembay-clocks.h
+F: include/dt-bindings/power/keembay-power.h
+
ARM/INTEL RESEARCH IMOTE/STARGATE 2 MACHINE SUPPORT
M: Jonathan Cameron <jic23@cam.ac.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v3 6/7] arm64: dts: keembay: Add device tree for Keem Bay SoC
2020-07-14 16:12 ` Daniele Alessandrelli
@ 2020-07-14 16:13 ` Daniele Alessandrelli
-1 siblings, 0 replies; 24+ messages in thread
From: Daniele Alessandrelli @ 2020-07-14 16:13 UTC (permalink / raw)
To: linux-arm-kernel, SoC Team, Rob Herring, Arnd Bergmann, Olof Johansson
Cc: Daniele Alessandrelli, devicetree, linux-kernel, Jassi Brar,
Catalin Marinas, Will Deacon, Paul J. Murphy, Dinh Nguyen
From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Add initial device tree for Intel Movidius SoC code-named Keem Bay.
This initial DT includes nodes for Cortex-A53 cores, UARTs, GIC, PSCI,
and PMU.
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
---
MAINTAINERS | 1 +
arch/arm64/boot/dts/intel/keembay-soc.dtsi | 125 +++++++++++++++++++++
2 files changed, 126 insertions(+)
create mode 100644 arch/arm64/boot/dts/intel/keembay-soc.dtsi
diff --git a/MAINTAINERS b/MAINTAINERS
index b151d0fc0588..e5019c8487c8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1959,6 +1959,7 @@ M: Paul J. Murphy <paul.j.murphy@intel.com>
M: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
S: Maintained
F: Documentation/devicetree/bindings/arm/keembay.yaml
+F: arch/arm64/boot/dts/intel/keembay-soc.dtsi
F: include/dt-bindings/clock/keembay-clocks.h
F: include/dt-bindings/power/keembay-power.h
diff --git a/arch/arm64/boot/dts/intel/keembay-soc.dtsi b/arch/arm64/boot/dts/intel/keembay-soc.dtsi
new file mode 100644
index 000000000000..57c67621ed63
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/keembay-soc.dtsi
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020, Intel Corporation.
+ *
+ * Device tree describing Keem Bay SoC.
+ */
+
+#include <dt-bindings/clock/keembay-clocks.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/keembay-power.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x0>;
+ enable-method = "psci";
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x1>;
+ enable-method = "psci";
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x2>;
+ enable-method = "psci";
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x3>;
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ gic: interrupt-controller@20500000 {
+ compatible = "arm,gic-v3";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0 0x20500000 0x0 0x20000>, /* GICD */
+ <0x0 0x20580000 0x0 0x80000>; /* GICR */
+ /* VGIC maintenance interrupt */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ /* Secure, non-secure, virtual, and hypervisor */
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 0x7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ uart0: serial@20150000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x20150000 0x0 0x100>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: serial@20160000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x20160000 0x0 0x100>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart2: serial@20170000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x20170000 0x0 0x100>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart3: serial@20180000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x20180000 0x0 0x100>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+ };
+};
--
2.26.2
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v3 6/7] arm64: dts: keembay: Add device tree for Keem Bay SoC
@ 2020-07-14 16:13 ` Daniele Alessandrelli
0 siblings, 0 replies; 24+ messages in thread
From: Daniele Alessandrelli @ 2020-07-14 16:13 UTC (permalink / raw)
To: linux-arm-kernel, SoC Team, Rob Herring, Arnd Bergmann, Olof Johansson
Cc: devicetree, Catalin Marinas, Jassi Brar, linux-kernel,
Dinh Nguyen, Paul J. Murphy, Will Deacon, Daniele Alessandrelli
From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Add initial device tree for Intel Movidius SoC code-named Keem Bay.
This initial DT includes nodes for Cortex-A53 cores, UARTs, GIC, PSCI,
and PMU.
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
---
MAINTAINERS | 1 +
arch/arm64/boot/dts/intel/keembay-soc.dtsi | 125 +++++++++++++++++++++
2 files changed, 126 insertions(+)
create mode 100644 arch/arm64/boot/dts/intel/keembay-soc.dtsi
diff --git a/MAINTAINERS b/MAINTAINERS
index b151d0fc0588..e5019c8487c8 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1959,6 +1959,7 @@ M: Paul J. Murphy <paul.j.murphy@intel.com>
M: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
S: Maintained
F: Documentation/devicetree/bindings/arm/keembay.yaml
+F: arch/arm64/boot/dts/intel/keembay-soc.dtsi
F: include/dt-bindings/clock/keembay-clocks.h
F: include/dt-bindings/power/keembay-power.h
diff --git a/arch/arm64/boot/dts/intel/keembay-soc.dtsi b/arch/arm64/boot/dts/intel/keembay-soc.dtsi
new file mode 100644
index 000000000000..57c67621ed63
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/keembay-soc.dtsi
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020, Intel Corporation.
+ *
+ * Device tree describing Keem Bay SoC.
+ */
+
+#include <dt-bindings/clock/keembay-clocks.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/keembay-power.h>
+
+/ {
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x0>;
+ enable-method = "psci";
+ };
+
+ cpu@1 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x1>;
+ enable-method = "psci";
+ };
+
+ cpu@2 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x2>;
+ enable-method = "psci";
+ };
+
+ cpu@3 {
+ compatible = "arm,cortex-a53";
+ device_type = "cpu";
+ reg = <0x3>;
+ enable-method = "psci";
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ gic: interrupt-controller@20500000 {
+ compatible = "arm,gic-v3";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x0 0x20500000 0x0 0x20000>, /* GICD */
+ <0x0 0x20580000 0x0 0x80000>; /* GICR */
+ /* VGIC maintenance interrupt */
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ /* Secure, non-secure, virtual, and hypervisor */
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_PPI 0x7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ uart0: serial@20150000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x20150000 0x0 0x100>;
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart1: serial@20160000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x20160000 0x0 0x100>;
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart2: serial@20170000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x20170000 0x0 0x100>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ uart3: serial@20180000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x20180000 0x0 0x100>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <24000000>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+ };
+};
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v3 7/7] arm64: dts: keembay: Add device tree for Keem Bay EVM board
2020-07-14 16:12 ` Daniele Alessandrelli
@ 2020-07-14 16:13 ` Daniele Alessandrelli
-1 siblings, 0 replies; 24+ messages in thread
From: Daniele Alessandrelli @ 2020-07-14 16:13 UTC (permalink / raw)
To: linux-arm-kernel, SoC Team, Rob Herring, Arnd Bergmann, Olof Johansson
Cc: Daniele Alessandrelli, devicetree, linux-kernel, Jassi Brar,
Catalin Marinas, Will Deacon, Paul J. Murphy, Dinh Nguyen
From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Add initial device tree for Keem Bay EVM board. With this minimal device
tree the board boots fine using an initramfs image.
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
---
MAINTAINERS | 1 +
arch/arm64/boot/dts/intel/Makefile | 1 +
arch/arm64/boot/dts/intel/keembay-evm.dts | 39 +++++++++++++++++++++++
3 files changed, 41 insertions(+)
create mode 100644 arch/arm64/boot/dts/intel/keembay-evm.dts
diff --git a/MAINTAINERS b/MAINTAINERS
index e5019c8487c8..bcda93691026 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1959,6 +1959,7 @@ M: Paul J. Murphy <paul.j.murphy@intel.com>
M: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
S: Maintained
F: Documentation/devicetree/bindings/arm/keembay.yaml
+F: arch/arm64/boot/dts/intel/keembay-evm.dts
F: arch/arm64/boot/dts/intel/keembay-soc.dtsi
F: include/dt-bindings/clock/keembay-clocks.h
F: include/dt-bindings/power/keembay-power.h
diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
index 40cb16e8c814..296eceec4276 100644
--- a/arch/arm64/boot/dts/intel/Makefile
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb \
socfpga_agilex_socdk_nand.dtb
+dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
diff --git a/arch/arm64/boot/dts/intel/keembay-evm.dts b/arch/arm64/boot/dts/intel/keembay-evm.dts
new file mode 100644
index 000000000000..347debb9c269
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/keembay-evm.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020, Intel Corporation
+ *
+ * Device tree describing Keem Bay EVM board.
+ */
+
+/dts-v1/;
+
+#include "keembay-soc.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Keem Bay EVM";
+ compatible = "intel,keembay-evm", "intel,keembay";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* 2GB of DDR memory. */
+ reg = <0x0 0x80000000 0x0 0x80000000>;
+ };
+
+};
+
+&uart3 {
+ status = "okay";
+};
--
2.26.2
^ permalink raw reply related [flat|nested] 24+ messages in thread
* [PATCH v3 7/7] arm64: dts: keembay: Add device tree for Keem Bay EVM board
@ 2020-07-14 16:13 ` Daniele Alessandrelli
0 siblings, 0 replies; 24+ messages in thread
From: Daniele Alessandrelli @ 2020-07-14 16:13 UTC (permalink / raw)
To: linux-arm-kernel, SoC Team, Rob Herring, Arnd Bergmann, Olof Johansson
Cc: devicetree, Catalin Marinas, Jassi Brar, linux-kernel,
Dinh Nguyen, Paul J. Murphy, Will Deacon, Daniele Alessandrelli
From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Add initial device tree for Keem Bay EVM board. With this minimal device
tree the board boots fine using an initramfs image.
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
---
MAINTAINERS | 1 +
arch/arm64/boot/dts/intel/Makefile | 1 +
arch/arm64/boot/dts/intel/keembay-evm.dts | 39 +++++++++++++++++++++++
3 files changed, 41 insertions(+)
create mode 100644 arch/arm64/boot/dts/intel/keembay-evm.dts
diff --git a/MAINTAINERS b/MAINTAINERS
index e5019c8487c8..bcda93691026 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1959,6 +1959,7 @@ M: Paul J. Murphy <paul.j.murphy@intel.com>
M: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
S: Maintained
F: Documentation/devicetree/bindings/arm/keembay.yaml
+F: arch/arm64/boot/dts/intel/keembay-evm.dts
F: arch/arm64/boot/dts/intel/keembay-soc.dtsi
F: include/dt-bindings/clock/keembay-clocks.h
F: include/dt-bindings/power/keembay-power.h
diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
index 40cb16e8c814..296eceec4276 100644
--- a/arch/arm64/boot/dts/intel/Makefile
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
dtb-$(CONFIG_ARCH_AGILEX) += socfpga_agilex_socdk.dtb \
socfpga_agilex_socdk_nand.dtb
+dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
diff --git a/arch/arm64/boot/dts/intel/keembay-evm.dts b/arch/arm64/boot/dts/intel/keembay-evm.dts
new file mode 100644
index 000000000000..347debb9c269
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/keembay-evm.dts
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
+/*
+ * Copyright (C) 2020, Intel Corporation
+ *
+ * Device tree describing Keem Bay EVM board.
+ */
+
+/dts-v1/;
+
+#include "keembay-soc.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Keem Bay EVM";
+ compatible = "intel,keembay-evm", "intel,keembay";
+
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart3;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* 2GB of DDR memory. */
+ reg = <0x0 0x80000000 0x0 0x80000000>;
+ };
+
+};
+
+&uart3 {
+ status = "okay";
+};
--
2.26.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 24+ messages in thread
* Re: [PATCH v3 2/7] dt-bindings: arm: Add Keem Bay bindings
2020-07-14 16:13 ` Daniele Alessandrelli
@ 2020-07-14 21:11 ` Rob Herring
-1 siblings, 0 replies; 24+ messages in thread
From: Rob Herring @ 2020-07-14 21:11 UTC (permalink / raw)
To: Daniele Alessandrelli
Cc: linux-arm-kernel, SoC Team, Arnd Bergmann, Olof Johansson,
Daniele Alessandrelli, devicetree, linux-kernel, Jassi Brar,
Catalin Marinas, Will Deacon, Paul J. Murphy, Dinh Nguyen
On Tue, Jul 14, 2020 at 05:13:00PM +0100, Daniele Alessandrelli wrote:
> From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
>
> Document Intel Movidius SoC code-named Keem Bay, along with the Keem Bay
> EVM board.
>
> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
> Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
> ---
> .../devicetree/bindings/arm/keembay.yaml | 19 +++++++++++++++++++
/intel,keembay.yaml
With that,
Reviewed-by: Rob Herring <robh@kernel.org>
> 1 file changed, 19 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/keembay.yaml
>
> diff --git a/Documentation/devicetree/bindings/arm/keembay.yaml b/Documentation/devicetree/bindings/arm/keembay.yaml
> new file mode 100644
> index 000000000000..f81b110046ca
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/keembay.yaml
> @@ -0,0 +1,19 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/keembay.yaml#
And don't forget this update.
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Keem Bay platform device tree bindings
> +
> +maintainers:
> + - Paul J. Murphy <paul.j.murphy@intel.com>
> + - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - intel,keembay-evm
> + - const: intel,keembay
> +...
> --
> 2.26.2
>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3 2/7] dt-bindings: arm: Add Keem Bay bindings
@ 2020-07-14 21:11 ` Rob Herring
0 siblings, 0 replies; 24+ messages in thread
From: Rob Herring @ 2020-07-14 21:11 UTC (permalink / raw)
To: Daniele Alessandrelli
Cc: devicetree, Arnd Bergmann, Catalin Marinas, Jassi Brar,
linux-kernel, Dinh Nguyen, SoC Team, Olof Johansson,
Paul J. Murphy, Will Deacon, Daniele Alessandrelli,
linux-arm-kernel
On Tue, Jul 14, 2020 at 05:13:00PM +0100, Daniele Alessandrelli wrote:
> From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
>
> Document Intel Movidius SoC code-named Keem Bay, along with the Keem Bay
> EVM board.
>
> Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
> Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
> ---
> .../devicetree/bindings/arm/keembay.yaml | 19 +++++++++++++++++++
/intel,keembay.yaml
With that,
Reviewed-by: Rob Herring <robh@kernel.org>
> 1 file changed, 19 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/arm/keembay.yaml
>
> diff --git a/Documentation/devicetree/bindings/arm/keembay.yaml b/Documentation/devicetree/bindings/arm/keembay.yaml
> new file mode 100644
> index 000000000000..f81b110046ca
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/keembay.yaml
> @@ -0,0 +1,19 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/keembay.yaml#
And don't forget this update.
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Keem Bay platform device tree bindings
> +
> +maintainers:
> + - Paul J. Murphy <paul.j.murphy@intel.com>
> + - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - intel,keembay-evm
> + - const: intel,keembay
> +...
> --
> 2.26.2
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3 3/7] dt-bindings: clock: Add Keem Bay clock IDs
2020-07-14 16:13 ` Daniele Alessandrelli
@ 2020-07-14 21:12 ` Rob Herring
-1 siblings, 0 replies; 24+ messages in thread
From: Rob Herring @ 2020-07-14 21:12 UTC (permalink / raw)
To: Daniele Alessandrelli
Cc: linux-arm-kernel, SoC Team, Arnd Bergmann, Olof Johansson,
Daniele Alessandrelli, devicetree, linux-kernel, Jassi Brar,
Catalin Marinas, Will Deacon, Paul J. Murphy, Dinh Nguyen
On Tue, Jul 14, 2020 at 05:13:01PM +0100, Daniele Alessandrelli wrote:
> From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
>
> Add clock dt-bindings for Keem Bay SoC.
Where's the binding schema?
>
> Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
> ---
> include/dt-bindings/clock/keembay-clocks.h | 188 +++++++++++++++++++++
> 1 file changed, 188 insertions(+)
> create mode 100644 include/dt-bindings/clock/keembay-clocks.h
>
> diff --git a/include/dt-bindings/clock/keembay-clocks.h b/include/dt-bindings/clock/keembay-clocks.h
> new file mode 100644
> index 000000000000..4ad6616ee8e0
> --- /dev/null
> +++ b/include/dt-bindings/clock/keembay-clocks.h
> @@ -0,0 +1,188 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
> +/*
> + * Copyright (c) 2020 Intel Corporation.
> + *
> + * Device tree defines for clocks in Keem Bay.
> + */
> +
> +#ifndef __DT_BINDINGS_KEEMBAY_CLOCKS_H
> +#define __DT_BINDINGS_KEEMBAY_CLOCKS_H
> +
> +/* CPR_PLL region. CLK_ID: 0 - 11 */
> +#define KEEM_BAY_A53_PLL_START_ID (0)
> +#define KEEM_BAY_A53_PLL_0_OUT_0 (KEEM_BAY_A53_PLL_START_ID + 0)
> +#define KEEM_BAY_A53_PLL_0_OUT_1 (KEEM_BAY_A53_PLL_START_ID + 1)
> +#define KEEM_BAY_A53_PLL_0_OUT_2 (KEEM_BAY_A53_PLL_START_ID + 2)
> +#define KEEM_BAY_A53_PLL_0_OUT_3 (KEEM_BAY_A53_PLL_START_ID + 3)
> +#define KEEM_BAY_A53_PLL_1_OUT_0 (KEEM_BAY_A53_PLL_START_ID + 4)
> +#define KEEM_BAY_A53_PLL_1_OUT_1 (KEEM_BAY_A53_PLL_START_ID + 5)
> +#define KEEM_BAY_A53_PLL_1_OUT_2 (KEEM_BAY_A53_PLL_START_ID + 6)
> +#define KEEM_BAY_A53_PLL_1_OUT_3 (KEEM_BAY_A53_PLL_START_ID + 7)
> +#define KEEM_BAY_A53_PLL_2_OUT_0 (KEEM_BAY_A53_PLL_START_ID + 8)
> +#define KEEM_BAY_A53_PLL_2_OUT_1 (KEEM_BAY_A53_PLL_START_ID + 9)
> +#define KEEM_BAY_A53_PLL_2_OUT_2 (KEEM_BAY_A53_PLL_START_ID + 10)
> +#define KEEM_BAY_A53_PLL_2_OUT_3 (KEEM_BAY_A53_PLL_START_ID + 11)
> +#define KEEM_BAY_A53_PLL_MAX_ID (KEEM_BAY_A53_PLL_2_OUT_3)
> +
> +/* A53_CPR region. CLK_ID: 12 - 30 */
> +#define KEEM_BAY_A53_START_ID (KEEM_BAY_A53_PLL_MAX_ID + 1)
> +#define KEEM_BAY_A53_AON (KEEM_BAY_A53_START_ID + 0)
> +#define KEEM_BAY_A53_NOC (KEEM_BAY_A53_START_ID + 1)
> +#define KEEM_BAY_A53_FUSE (KEEM_BAY_A53_START_ID + 2)
> +#define KEEM_BAY_A53_ROM (KEEM_BAY_A53_START_ID + 3)
> +#define KEEM_BAY_A53_ICB (KEEM_BAY_A53_START_ID + 4)
> +#define KEEM_BAY_A53_GIC (KEEM_BAY_A53_START_ID + 5)
> +#define KEEM_BAY_A53_TIM (KEEM_BAY_A53_START_ID + 6)
> +#define KEEM_BAY_A53_GPIO (KEEM_BAY_A53_START_ID + 7)
> +#define KEEM_BAY_A53_JTAG (KEEM_BAY_A53_START_ID + 8)
> +#define KEEM_BAY_A53_MBIST_0 (KEEM_BAY_A53_START_ID + 9)
> +#define KEEM_BAY_A53_DSS (KEEM_BAY_A53_START_ID + 10)
> +#define KEEM_BAY_A53_MSS (KEEM_BAY_A53_START_ID + 11)
> +#define KEEM_BAY_A53_PSS (KEEM_BAY_A53_START_ID + 12)
> +#define KEEM_BAY_A53_PCIE (KEEM_BAY_A53_START_ID + 13)
> +#define KEEM_BAY_A53_VENC (KEEM_BAY_A53_START_ID + 14)
> +#define KEEM_BAY_A53_VDEC (KEEM_BAY_A53_START_ID + 15)
> +#define KEEM_BAY_A53_MBIST_1 (KEEM_BAY_A53_START_ID + 16)
> +#define KEEM_BAY_A53_MBIST_2 (KEEM_BAY_A53_START_ID + 17)
> +#define KEEM_BAY_A53_MBIST_3 (KEEM_BAY_A53_START_ID + 18)
> +#define KEEM_BAY_A53_MAX_ID (KEEM_BAY_A53_MBIST_3)
> +
> +/* A53_CPR_AUX region. CLK_ID: 31 - 57 */
> +#define KEEM_BAY_A53_AUX_START_ID (KEEM_BAY_A53_MAX_ID + 1)
> +#define KEEM_BAY_A53_AUX_32KHZ (KEEM_BAY_A53_AUX_START_ID + 0)
> +#define KEEM_BAY_A53_AUX_CPR (KEEM_BAY_A53_AUX_START_ID + 1)
> +#define KEEM_BAY_A53_AUX_TSENS (KEEM_BAY_A53_AUX_START_ID + 2)
> +#define KEEM_BAY_A53_AUX_GPIO0 (KEEM_BAY_A53_AUX_START_ID + 3)
> +#define KEEM_BAY_A53_AUX_GPIO1 (KEEM_BAY_A53_AUX_START_ID + 4)
> +#define KEEM_BAY_A53_AUX_GPIO2 (KEEM_BAY_A53_AUX_START_ID + 5)
> +#define KEEM_BAY_A53_AUX_GPIO3 (KEEM_BAY_A53_AUX_START_ID + 6)
> +#define KEEM_BAY_A53_AUX_DDR_REF (KEEM_BAY_A53_AUX_START_ID + 7)
> +#define KEEM_BAY_A53_AUX_DDR_REF_BYPASS (KEEM_BAY_A53_AUX_START_ID + 8)
> +#define KEEM_BAY_A53_AUX_RESERVED1 (KEEM_BAY_A53_AUX_START_ID + 9)
> +#define KEEM_BAY_A53_AUX_VENC (KEEM_BAY_A53_AUX_START_ID + 10)
> +#define KEEM_BAY_A53_AUX_VDEC (KEEM_BAY_A53_AUX_START_ID + 11)
> +#define KEEM_BAY_A53_AUX_USOC_USB_CTRL (KEEM_BAY_A53_AUX_START_ID + 12)
> +#define KEEM_BAY_A53_AUX_USB (KEEM_BAY_A53_AUX_START_ID + 13)
> +#define KEEM_BAY_A53_AUX_USB_REF (KEEM_BAY_A53_AUX_START_ID + 14)
> +#define KEEM_BAY_A53_AUX_USB_ALT_REF (KEEM_BAY_A53_AUX_START_ID + 15)
> +#define KEEM_BAY_A53_AUX_USB_SUSPEND (KEEM_BAY_A53_AUX_START_ID + 16)
> +#define KEEM_BAY_A53_AUX_RESERVED2 (KEEM_BAY_A53_AUX_START_ID + 17)
> +#define KEEM_BAY_A53_AUX_PCIE (KEEM_BAY_A53_AUX_START_ID + 18)
> +#define KEEM_BAY_A53_AUX_DBG_CLK (KEEM_BAY_A53_AUX_START_ID + 19)
> +#define KEEM_BAY_A53_AUX_DBG_TRACE (KEEM_BAY_A53_AUX_START_ID + 20)
> +#define KEEM_BAY_A53_AUX_DBG_DAP (KEEM_BAY_A53_AUX_START_ID + 21)
> +#define KEEM_BAY_A53_AUX_ARM_CLKIN (KEEM_BAY_A53_AUX_START_ID + 22)
> +#define KEEM_BAY_A53_AUX_ARM_AXI (KEEM_BAY_A53_AUX_START_ID + 23)
> +#define KEEM_BAY_A53_AUX_USOC (KEEM_BAY_A53_AUX_START_ID + 24)
> +#define KEEM_BAY_A53_AUX_USOC_REF (KEEM_BAY_A53_AUX_START_ID + 25)
> +#define KEEM_BAY_A53_AUX_USOC_ALT_REF (KEEM_BAY_A53_AUX_START_ID + 26)
> +#define KEEM_BAY_A53_AUX_MAX_ID (KEEM_BAY_A53_AUX_USOC_ALT_REF)
> +
> +/* PSS_CPR region CLK_ID: CLK_ID: 58 - 82 */
> +#define KEEM_BAY_PSS_START_ID (KEEM_BAY_A53_AUX_MAX_ID + 1)
> +#define KEEM_BAY_PSS_I2C0 (KEEM_BAY_PSS_START_ID + 0)
> +#define KEEM_BAY_PSS_I2C1 (KEEM_BAY_PSS_START_ID + 1)
> +#define KEEM_BAY_PSS_I2C2 (KEEM_BAY_PSS_START_ID + 2)
> +#define KEEM_BAY_PSS_I2C3 (KEEM_BAY_PSS_START_ID + 3)
> +#define KEEM_BAY_PSS_I2C4 (KEEM_BAY_PSS_START_ID + 4)
> +#define KEEM_BAY_PSS_SD0 (KEEM_BAY_PSS_START_ID + 5)
> +#define KEEM_BAY_PSS_SD1 (KEEM_BAY_PSS_START_ID + 6)
> +#define KEEM_BAY_PSS_EMMC (KEEM_BAY_PSS_START_ID + 7)
> +#define KEEM_BAY_PSS_AXI_DMA (KEEM_BAY_PSS_START_ID + 8)
> +#define KEEM_BAY_PSS_SPI0 (KEEM_BAY_PSS_START_ID + 9)
> +#define KEEM_BAY_PSS_SPI1 (KEEM_BAY_PSS_START_ID + 10)
> +#define KEEM_BAY_PSS_SPI2 (KEEM_BAY_PSS_START_ID + 11)
> +#define KEEM_BAY_PSS_SPI3 (KEEM_BAY_PSS_START_ID + 12)
> +#define KEEM_BAY_PSS_I2S0 (KEEM_BAY_PSS_START_ID + 13)
> +#define KEEM_BAY_PSS_I2S1 (KEEM_BAY_PSS_START_ID + 14)
> +#define KEEM_BAY_PSS_I2S2 (KEEM_BAY_PSS_START_ID + 15)
> +#define KEEM_BAY_PSS_I2S3 (KEEM_BAY_PSS_START_ID + 16)
> +#define KEEM_BAY_PSS_UART0 (KEEM_BAY_PSS_START_ID + 17)
> +#define KEEM_BAY_PSS_UART1 (KEEM_BAY_PSS_START_ID + 18)
> +#define KEEM_BAY_PSS_UART2 (KEEM_BAY_PSS_START_ID + 19)
> +#define KEEM_BAY_PSS_UART3 (KEEM_BAY_PSS_START_ID + 20)
> +#define KEEM_BAY_PSS_I3C0 (KEEM_BAY_PSS_START_ID + 21)
> +#define KEEM_BAY_PSS_I3C1 (KEEM_BAY_PSS_START_ID + 22)
> +#define KEEM_BAY_PSS_I3C2 (KEEM_BAY_PSS_START_ID + 23)
> +#define KEEM_BAY_PSS_GBE (KEEM_BAY_PSS_START_ID + 24)
> +#define KEEM_BAY_PSS_MAX_ID (KEEM_BAY_PSS_GBE)
> +
> +/* PSS_CPR_AUX region. CLK_ID: 83 - 97 */
> +#define KEEM_BAY_PSS_AUX_START_ID (KEEM_BAY_PSS_MAX_ID + 1)
> +#define KEEM_BAY_PSS_AUX_I2S0 (KEEM_BAY_PSS_AUX_START_ID + 0)
> +#define KEEM_BAY_PSS_AUX_I2S1 (KEEM_BAY_PSS_AUX_START_ID + 1)
> +#define KEEM_BAY_PSS_AUX_I2S2 (KEEM_BAY_PSS_AUX_START_ID + 2)
> +#define KEEM_BAY_PSS_AUX_I2S3 (KEEM_BAY_PSS_AUX_START_ID + 3)
> +#define KEEM_BAY_PSS_AUX_UART0 (KEEM_BAY_PSS_AUX_START_ID + 4)
> +#define KEEM_BAY_PSS_AUX_UART1 (KEEM_BAY_PSS_AUX_START_ID + 5)
> +#define KEEM_BAY_PSS_AUX_UART2 (KEEM_BAY_PSS_AUX_START_ID + 6)
> +#define KEEM_BAY_PSS_AUX_UART3 (KEEM_BAY_PSS_AUX_START_ID + 7)
> +#define KEEM_BAY_PSS_AUX_SD0 (KEEM_BAY_PSS_AUX_START_ID + 8)
> +#define KEEM_BAY_PSS_AUX_SD1 (KEEM_BAY_PSS_AUX_START_ID + 9)
> +#define KEEM_BAY_PSS_AUX_EMMC (KEEM_BAY_PSS_AUX_START_ID + 10)
> +#define KEEM_BAY_PSS_AUX_TRNG (KEEM_BAY_PSS_AUX_START_ID + 11)
> +#define KEEM_BAY_PSS_AUX_OCS (KEEM_BAY_PSS_AUX_START_ID + 12)
> +#define KEEM_BAY_PSS_AUX_GBE_PTP (KEEM_BAY_PSS_AUX_START_ID + 13)
> +#define KEEM_BAY_PSS_AUX_GBE_TX (KEEM_BAY_PSS_AUX_START_ID + 14)
> +#define KEEM_BAY_PSS_AUX_MAX_ID (KEEM_BAY_PSS_AUX_GBE_TX)
> +
> +/* DSS_CPR region. CLK_ID: 98 - 109 */
> +#define KEEM_BAY_DSS_START_ID (KEEM_BAY_PSS_AUX_MAX_ID + 1)
> +#define KEEM_BAY_DSS_SYS (KEEM_BAY_DSS_START_ID + 0)
> +#define KEEM_BAY_DSS_DEC400 (KEEM_BAY_DSS_START_ID + 1)
> +#define KEEM_BAY_DSS_TSENSE (KEEM_BAY_DSS_START_ID + 2)
> +#define KEEM_BAY_DSS_BUS_0 (KEEM_BAY_DSS_START_ID + 3)
> +#define KEEM_BAY_DSS_CORE_0 (KEEM_BAY_DSS_START_ID + 4)
> +#define KEEM_BAY_DSS_REF_0 (KEEM_BAY_DSS_START_ID + 5)
> +#define KEEM_BAY_DSS_REF_BYP_0 (KEEM_BAY_DSS_START_ID + 6)
> +#define KEEM_BAY_DSS_BUS_1 (KEEM_BAY_DSS_START_ID + 7)
> +#define KEEM_BAY_DSS_CORE_1 (KEEM_BAY_DSS_START_ID + 8)
> +#define KEEM_BAY_DSS_REF_1 (KEEM_BAY_DSS_START_ID + 9)
> +#define KEEM_BAY_DSS_REF_BYP_1 (KEEM_BAY_DSS_START_ID + 10)
> +#define KEEM_BAY_DSS_MMU500 (KEEM_BAY_DSS_START_ID + 11)
> +#define KEEM_BAY_DSS_MAX_ID (KEEM_BAY_DSS_MMU500)
> +
> +/* USS_CPR region. CLK_ID: 110 - 116 */
> +#define KEEM_BAY_USS_START_ID (KEEM_BAY_DSS_MAX_ID + 1)
> +#define KEEM_BAY_USS_SYS (KEEM_BAY_USS_START_ID + 0)
> +#define KEEM_BAY_USS_REF (KEEM_BAY_USS_START_ID + 1)
> +#define KEEM_BAY_USS_ALT_REF (KEEM_BAY_USS_START_ID + 2)
> +#define KEEM_BAY_USS_SUSPEND (KEEM_BAY_USS_START_ID + 3)
> +#define KEEM_BAY_USS_CORE (KEEM_BAY_USS_START_ID + 4)
> +#define KEEM_BAY_USS_LOW_JIT (KEEM_BAY_USS_START_ID + 5)
> +#define KEEM_BAY_USS_PHY_TST (KEEM_BAY_USS_START_ID + 6)
> +#define KEEM_BAY_USS_MAX_ID (KEEM_BAY_USS_PHY_TST)
> +
> +/* MSS_CPR region. CLK_ID: 117 - 129 */
> +#define KEEM_BAY_MSS_START_ID (KEEM_BAY_USS_MAX_ID + 1)
> +#define KEEM_BAY_MSS_CPU (KEEM_BAY_MSS_START_ID + 0)
> +#define KEEM_BAY_MSS_CPU_DSU (KEEM_BAY_MSS_START_ID + 1)
> +#define KEEM_BAY_MSS_CPU_L2C (KEEM_BAY_MSS_START_ID + 2)
> +#define KEEM_BAY_MSS_CPU_ICB (KEEM_BAY_MSS_START_ID + 3)
> +#define KEEM_BAY_MSS_CPU_TIM (KEEM_BAY_MSS_START_ID + 4)
> +#define KEEM_BAY_MSS_JPGENC (KEEM_BAY_MSS_START_ID + 5)
> +#define KEEM_BAY_MSS_DTB (KEEM_BAY_MSS_START_ID + 6)
> +#define KEEM_BAY_MSS_BLT (KEEM_BAY_MSS_START_ID + 7)
> +#define KEEM_BAY_MSS_UPA (KEEM_BAY_MSS_START_ID + 8)
> +#define KEEM_BAY_MSS_NCE (KEEM_BAY_MSS_START_ID + 9)
> +#define KEEM_BAY_MSS_CV (KEEM_BAY_MSS_START_ID + 10)
> +#define KEEM_BAY_MSS_ISP (KEEM_BAY_MSS_START_ID + 11)
> +#define KEEM_BAY_MSS_CAM (KEEM_BAY_MSS_START_ID + 12)
> +#define KEEM_BAY_MSS_MAX_ID (KEEM_BAY_MSS_CAM)
> +
> +/* MSS_CPR_AUX region. CLK_ID: 130 - 138 */
> +#define KEEM_BAY_MSS_AUX_START_ID (KEEM_BAY_MSS_MAX_ID + 1)
> +#define KEEM_BAY_MSS_AUX_CIF (KEEM_BAY_MSS_AUX_START_ID + 0)
> +#define KEEM_BAY_MSS_AUX_LCD (KEEM_BAY_MSS_AUX_START_ID + 1)
> +#define KEEM_BAY_MSS_AUX_SLVDS0 (KEEM_BAY_MSS_AUX_START_ID + 2)
> +#define KEEM_BAY_MSS_AUX_SLVDS1 (KEEM_BAY_MSS_AUX_START_ID + 3)
> +#define KEEM_BAY_MSS_AUX_MIPI_TX0 (KEEM_BAY_MSS_AUX_START_ID + 4)
> +#define KEEM_BAY_MSS_AUX_MIPI_TX1 (KEEM_BAY_MSS_AUX_START_ID + 5)
> +#define KEEM_BAY_MSS_AUX_MIPI_ECFG (KEEM_BAY_MSS_AUX_START_ID + 6)
> +#define KEEM_BAY_MSS_AUX_MIPI_CFG (KEEM_BAY_MSS_AUX_START_ID + 7)
> +#define KEEM_BAY_MSS_AUX_JPGENC (KEEM_BAY_MSS_AUX_START_ID + 8)
> +#define KEEM_BAY_MSS_AUX_MAX_ID (KEEM_BAY_MSS_AUX_JPGENC)
> +
> +#define KEEM_BAY_NUM_CLOCKS (KEEM_BAY_MSS_AUX_MAX_ID + 1)
> +
> +#endif /* __DT_BINDINGS_KEEMBAY_CLOCKS_H */
> --
> 2.26.2
>
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3 3/7] dt-bindings: clock: Add Keem Bay clock IDs
@ 2020-07-14 21:12 ` Rob Herring
0 siblings, 0 replies; 24+ messages in thread
From: Rob Herring @ 2020-07-14 21:12 UTC (permalink / raw)
To: Daniele Alessandrelli
Cc: devicetree, Arnd Bergmann, Catalin Marinas, Jassi Brar,
linux-kernel, Dinh Nguyen, SoC Team, Olof Johansson,
Paul J. Murphy, Will Deacon, Daniele Alessandrelli,
linux-arm-kernel
On Tue, Jul 14, 2020 at 05:13:01PM +0100, Daniele Alessandrelli wrote:
> From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
>
> Add clock dt-bindings for Keem Bay SoC.
Where's the binding schema?
>
> Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
> ---
> include/dt-bindings/clock/keembay-clocks.h | 188 +++++++++++++++++++++
> 1 file changed, 188 insertions(+)
> create mode 100644 include/dt-bindings/clock/keembay-clocks.h
>
> diff --git a/include/dt-bindings/clock/keembay-clocks.h b/include/dt-bindings/clock/keembay-clocks.h
> new file mode 100644
> index 000000000000..4ad6616ee8e0
> --- /dev/null
> +++ b/include/dt-bindings/clock/keembay-clocks.h
> @@ -0,0 +1,188 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
> +/*
> + * Copyright (c) 2020 Intel Corporation.
> + *
> + * Device tree defines for clocks in Keem Bay.
> + */
> +
> +#ifndef __DT_BINDINGS_KEEMBAY_CLOCKS_H
> +#define __DT_BINDINGS_KEEMBAY_CLOCKS_H
> +
> +/* CPR_PLL region. CLK_ID: 0 - 11 */
> +#define KEEM_BAY_A53_PLL_START_ID (0)
> +#define KEEM_BAY_A53_PLL_0_OUT_0 (KEEM_BAY_A53_PLL_START_ID + 0)
> +#define KEEM_BAY_A53_PLL_0_OUT_1 (KEEM_BAY_A53_PLL_START_ID + 1)
> +#define KEEM_BAY_A53_PLL_0_OUT_2 (KEEM_BAY_A53_PLL_START_ID + 2)
> +#define KEEM_BAY_A53_PLL_0_OUT_3 (KEEM_BAY_A53_PLL_START_ID + 3)
> +#define KEEM_BAY_A53_PLL_1_OUT_0 (KEEM_BAY_A53_PLL_START_ID + 4)
> +#define KEEM_BAY_A53_PLL_1_OUT_1 (KEEM_BAY_A53_PLL_START_ID + 5)
> +#define KEEM_BAY_A53_PLL_1_OUT_2 (KEEM_BAY_A53_PLL_START_ID + 6)
> +#define KEEM_BAY_A53_PLL_1_OUT_3 (KEEM_BAY_A53_PLL_START_ID + 7)
> +#define KEEM_BAY_A53_PLL_2_OUT_0 (KEEM_BAY_A53_PLL_START_ID + 8)
> +#define KEEM_BAY_A53_PLL_2_OUT_1 (KEEM_BAY_A53_PLL_START_ID + 9)
> +#define KEEM_BAY_A53_PLL_2_OUT_2 (KEEM_BAY_A53_PLL_START_ID + 10)
> +#define KEEM_BAY_A53_PLL_2_OUT_3 (KEEM_BAY_A53_PLL_START_ID + 11)
> +#define KEEM_BAY_A53_PLL_MAX_ID (KEEM_BAY_A53_PLL_2_OUT_3)
> +
> +/* A53_CPR region. CLK_ID: 12 - 30 */
> +#define KEEM_BAY_A53_START_ID (KEEM_BAY_A53_PLL_MAX_ID + 1)
> +#define KEEM_BAY_A53_AON (KEEM_BAY_A53_START_ID + 0)
> +#define KEEM_BAY_A53_NOC (KEEM_BAY_A53_START_ID + 1)
> +#define KEEM_BAY_A53_FUSE (KEEM_BAY_A53_START_ID + 2)
> +#define KEEM_BAY_A53_ROM (KEEM_BAY_A53_START_ID + 3)
> +#define KEEM_BAY_A53_ICB (KEEM_BAY_A53_START_ID + 4)
> +#define KEEM_BAY_A53_GIC (KEEM_BAY_A53_START_ID + 5)
> +#define KEEM_BAY_A53_TIM (KEEM_BAY_A53_START_ID + 6)
> +#define KEEM_BAY_A53_GPIO (KEEM_BAY_A53_START_ID + 7)
> +#define KEEM_BAY_A53_JTAG (KEEM_BAY_A53_START_ID + 8)
> +#define KEEM_BAY_A53_MBIST_0 (KEEM_BAY_A53_START_ID + 9)
> +#define KEEM_BAY_A53_DSS (KEEM_BAY_A53_START_ID + 10)
> +#define KEEM_BAY_A53_MSS (KEEM_BAY_A53_START_ID + 11)
> +#define KEEM_BAY_A53_PSS (KEEM_BAY_A53_START_ID + 12)
> +#define KEEM_BAY_A53_PCIE (KEEM_BAY_A53_START_ID + 13)
> +#define KEEM_BAY_A53_VENC (KEEM_BAY_A53_START_ID + 14)
> +#define KEEM_BAY_A53_VDEC (KEEM_BAY_A53_START_ID + 15)
> +#define KEEM_BAY_A53_MBIST_1 (KEEM_BAY_A53_START_ID + 16)
> +#define KEEM_BAY_A53_MBIST_2 (KEEM_BAY_A53_START_ID + 17)
> +#define KEEM_BAY_A53_MBIST_3 (KEEM_BAY_A53_START_ID + 18)
> +#define KEEM_BAY_A53_MAX_ID (KEEM_BAY_A53_MBIST_3)
> +
> +/* A53_CPR_AUX region. CLK_ID: 31 - 57 */
> +#define KEEM_BAY_A53_AUX_START_ID (KEEM_BAY_A53_MAX_ID + 1)
> +#define KEEM_BAY_A53_AUX_32KHZ (KEEM_BAY_A53_AUX_START_ID + 0)
> +#define KEEM_BAY_A53_AUX_CPR (KEEM_BAY_A53_AUX_START_ID + 1)
> +#define KEEM_BAY_A53_AUX_TSENS (KEEM_BAY_A53_AUX_START_ID + 2)
> +#define KEEM_BAY_A53_AUX_GPIO0 (KEEM_BAY_A53_AUX_START_ID + 3)
> +#define KEEM_BAY_A53_AUX_GPIO1 (KEEM_BAY_A53_AUX_START_ID + 4)
> +#define KEEM_BAY_A53_AUX_GPIO2 (KEEM_BAY_A53_AUX_START_ID + 5)
> +#define KEEM_BAY_A53_AUX_GPIO3 (KEEM_BAY_A53_AUX_START_ID + 6)
> +#define KEEM_BAY_A53_AUX_DDR_REF (KEEM_BAY_A53_AUX_START_ID + 7)
> +#define KEEM_BAY_A53_AUX_DDR_REF_BYPASS (KEEM_BAY_A53_AUX_START_ID + 8)
> +#define KEEM_BAY_A53_AUX_RESERVED1 (KEEM_BAY_A53_AUX_START_ID + 9)
> +#define KEEM_BAY_A53_AUX_VENC (KEEM_BAY_A53_AUX_START_ID + 10)
> +#define KEEM_BAY_A53_AUX_VDEC (KEEM_BAY_A53_AUX_START_ID + 11)
> +#define KEEM_BAY_A53_AUX_USOC_USB_CTRL (KEEM_BAY_A53_AUX_START_ID + 12)
> +#define KEEM_BAY_A53_AUX_USB (KEEM_BAY_A53_AUX_START_ID + 13)
> +#define KEEM_BAY_A53_AUX_USB_REF (KEEM_BAY_A53_AUX_START_ID + 14)
> +#define KEEM_BAY_A53_AUX_USB_ALT_REF (KEEM_BAY_A53_AUX_START_ID + 15)
> +#define KEEM_BAY_A53_AUX_USB_SUSPEND (KEEM_BAY_A53_AUX_START_ID + 16)
> +#define KEEM_BAY_A53_AUX_RESERVED2 (KEEM_BAY_A53_AUX_START_ID + 17)
> +#define KEEM_BAY_A53_AUX_PCIE (KEEM_BAY_A53_AUX_START_ID + 18)
> +#define KEEM_BAY_A53_AUX_DBG_CLK (KEEM_BAY_A53_AUX_START_ID + 19)
> +#define KEEM_BAY_A53_AUX_DBG_TRACE (KEEM_BAY_A53_AUX_START_ID + 20)
> +#define KEEM_BAY_A53_AUX_DBG_DAP (KEEM_BAY_A53_AUX_START_ID + 21)
> +#define KEEM_BAY_A53_AUX_ARM_CLKIN (KEEM_BAY_A53_AUX_START_ID + 22)
> +#define KEEM_BAY_A53_AUX_ARM_AXI (KEEM_BAY_A53_AUX_START_ID + 23)
> +#define KEEM_BAY_A53_AUX_USOC (KEEM_BAY_A53_AUX_START_ID + 24)
> +#define KEEM_BAY_A53_AUX_USOC_REF (KEEM_BAY_A53_AUX_START_ID + 25)
> +#define KEEM_BAY_A53_AUX_USOC_ALT_REF (KEEM_BAY_A53_AUX_START_ID + 26)
> +#define KEEM_BAY_A53_AUX_MAX_ID (KEEM_BAY_A53_AUX_USOC_ALT_REF)
> +
> +/* PSS_CPR region CLK_ID: CLK_ID: 58 - 82 */
> +#define KEEM_BAY_PSS_START_ID (KEEM_BAY_A53_AUX_MAX_ID + 1)
> +#define KEEM_BAY_PSS_I2C0 (KEEM_BAY_PSS_START_ID + 0)
> +#define KEEM_BAY_PSS_I2C1 (KEEM_BAY_PSS_START_ID + 1)
> +#define KEEM_BAY_PSS_I2C2 (KEEM_BAY_PSS_START_ID + 2)
> +#define KEEM_BAY_PSS_I2C3 (KEEM_BAY_PSS_START_ID + 3)
> +#define KEEM_BAY_PSS_I2C4 (KEEM_BAY_PSS_START_ID + 4)
> +#define KEEM_BAY_PSS_SD0 (KEEM_BAY_PSS_START_ID + 5)
> +#define KEEM_BAY_PSS_SD1 (KEEM_BAY_PSS_START_ID + 6)
> +#define KEEM_BAY_PSS_EMMC (KEEM_BAY_PSS_START_ID + 7)
> +#define KEEM_BAY_PSS_AXI_DMA (KEEM_BAY_PSS_START_ID + 8)
> +#define KEEM_BAY_PSS_SPI0 (KEEM_BAY_PSS_START_ID + 9)
> +#define KEEM_BAY_PSS_SPI1 (KEEM_BAY_PSS_START_ID + 10)
> +#define KEEM_BAY_PSS_SPI2 (KEEM_BAY_PSS_START_ID + 11)
> +#define KEEM_BAY_PSS_SPI3 (KEEM_BAY_PSS_START_ID + 12)
> +#define KEEM_BAY_PSS_I2S0 (KEEM_BAY_PSS_START_ID + 13)
> +#define KEEM_BAY_PSS_I2S1 (KEEM_BAY_PSS_START_ID + 14)
> +#define KEEM_BAY_PSS_I2S2 (KEEM_BAY_PSS_START_ID + 15)
> +#define KEEM_BAY_PSS_I2S3 (KEEM_BAY_PSS_START_ID + 16)
> +#define KEEM_BAY_PSS_UART0 (KEEM_BAY_PSS_START_ID + 17)
> +#define KEEM_BAY_PSS_UART1 (KEEM_BAY_PSS_START_ID + 18)
> +#define KEEM_BAY_PSS_UART2 (KEEM_BAY_PSS_START_ID + 19)
> +#define KEEM_BAY_PSS_UART3 (KEEM_BAY_PSS_START_ID + 20)
> +#define KEEM_BAY_PSS_I3C0 (KEEM_BAY_PSS_START_ID + 21)
> +#define KEEM_BAY_PSS_I3C1 (KEEM_BAY_PSS_START_ID + 22)
> +#define KEEM_BAY_PSS_I3C2 (KEEM_BAY_PSS_START_ID + 23)
> +#define KEEM_BAY_PSS_GBE (KEEM_BAY_PSS_START_ID + 24)
> +#define KEEM_BAY_PSS_MAX_ID (KEEM_BAY_PSS_GBE)
> +
> +/* PSS_CPR_AUX region. CLK_ID: 83 - 97 */
> +#define KEEM_BAY_PSS_AUX_START_ID (KEEM_BAY_PSS_MAX_ID + 1)
> +#define KEEM_BAY_PSS_AUX_I2S0 (KEEM_BAY_PSS_AUX_START_ID + 0)
> +#define KEEM_BAY_PSS_AUX_I2S1 (KEEM_BAY_PSS_AUX_START_ID + 1)
> +#define KEEM_BAY_PSS_AUX_I2S2 (KEEM_BAY_PSS_AUX_START_ID + 2)
> +#define KEEM_BAY_PSS_AUX_I2S3 (KEEM_BAY_PSS_AUX_START_ID + 3)
> +#define KEEM_BAY_PSS_AUX_UART0 (KEEM_BAY_PSS_AUX_START_ID + 4)
> +#define KEEM_BAY_PSS_AUX_UART1 (KEEM_BAY_PSS_AUX_START_ID + 5)
> +#define KEEM_BAY_PSS_AUX_UART2 (KEEM_BAY_PSS_AUX_START_ID + 6)
> +#define KEEM_BAY_PSS_AUX_UART3 (KEEM_BAY_PSS_AUX_START_ID + 7)
> +#define KEEM_BAY_PSS_AUX_SD0 (KEEM_BAY_PSS_AUX_START_ID + 8)
> +#define KEEM_BAY_PSS_AUX_SD1 (KEEM_BAY_PSS_AUX_START_ID + 9)
> +#define KEEM_BAY_PSS_AUX_EMMC (KEEM_BAY_PSS_AUX_START_ID + 10)
> +#define KEEM_BAY_PSS_AUX_TRNG (KEEM_BAY_PSS_AUX_START_ID + 11)
> +#define KEEM_BAY_PSS_AUX_OCS (KEEM_BAY_PSS_AUX_START_ID + 12)
> +#define KEEM_BAY_PSS_AUX_GBE_PTP (KEEM_BAY_PSS_AUX_START_ID + 13)
> +#define KEEM_BAY_PSS_AUX_GBE_TX (KEEM_BAY_PSS_AUX_START_ID + 14)
> +#define KEEM_BAY_PSS_AUX_MAX_ID (KEEM_BAY_PSS_AUX_GBE_TX)
> +
> +/* DSS_CPR region. CLK_ID: 98 - 109 */
> +#define KEEM_BAY_DSS_START_ID (KEEM_BAY_PSS_AUX_MAX_ID + 1)
> +#define KEEM_BAY_DSS_SYS (KEEM_BAY_DSS_START_ID + 0)
> +#define KEEM_BAY_DSS_DEC400 (KEEM_BAY_DSS_START_ID + 1)
> +#define KEEM_BAY_DSS_TSENSE (KEEM_BAY_DSS_START_ID + 2)
> +#define KEEM_BAY_DSS_BUS_0 (KEEM_BAY_DSS_START_ID + 3)
> +#define KEEM_BAY_DSS_CORE_0 (KEEM_BAY_DSS_START_ID + 4)
> +#define KEEM_BAY_DSS_REF_0 (KEEM_BAY_DSS_START_ID + 5)
> +#define KEEM_BAY_DSS_REF_BYP_0 (KEEM_BAY_DSS_START_ID + 6)
> +#define KEEM_BAY_DSS_BUS_1 (KEEM_BAY_DSS_START_ID + 7)
> +#define KEEM_BAY_DSS_CORE_1 (KEEM_BAY_DSS_START_ID + 8)
> +#define KEEM_BAY_DSS_REF_1 (KEEM_BAY_DSS_START_ID + 9)
> +#define KEEM_BAY_DSS_REF_BYP_1 (KEEM_BAY_DSS_START_ID + 10)
> +#define KEEM_BAY_DSS_MMU500 (KEEM_BAY_DSS_START_ID + 11)
> +#define KEEM_BAY_DSS_MAX_ID (KEEM_BAY_DSS_MMU500)
> +
> +/* USS_CPR region. CLK_ID: 110 - 116 */
> +#define KEEM_BAY_USS_START_ID (KEEM_BAY_DSS_MAX_ID + 1)
> +#define KEEM_BAY_USS_SYS (KEEM_BAY_USS_START_ID + 0)
> +#define KEEM_BAY_USS_REF (KEEM_BAY_USS_START_ID + 1)
> +#define KEEM_BAY_USS_ALT_REF (KEEM_BAY_USS_START_ID + 2)
> +#define KEEM_BAY_USS_SUSPEND (KEEM_BAY_USS_START_ID + 3)
> +#define KEEM_BAY_USS_CORE (KEEM_BAY_USS_START_ID + 4)
> +#define KEEM_BAY_USS_LOW_JIT (KEEM_BAY_USS_START_ID + 5)
> +#define KEEM_BAY_USS_PHY_TST (KEEM_BAY_USS_START_ID + 6)
> +#define KEEM_BAY_USS_MAX_ID (KEEM_BAY_USS_PHY_TST)
> +
> +/* MSS_CPR region. CLK_ID: 117 - 129 */
> +#define KEEM_BAY_MSS_START_ID (KEEM_BAY_USS_MAX_ID + 1)
> +#define KEEM_BAY_MSS_CPU (KEEM_BAY_MSS_START_ID + 0)
> +#define KEEM_BAY_MSS_CPU_DSU (KEEM_BAY_MSS_START_ID + 1)
> +#define KEEM_BAY_MSS_CPU_L2C (KEEM_BAY_MSS_START_ID + 2)
> +#define KEEM_BAY_MSS_CPU_ICB (KEEM_BAY_MSS_START_ID + 3)
> +#define KEEM_BAY_MSS_CPU_TIM (KEEM_BAY_MSS_START_ID + 4)
> +#define KEEM_BAY_MSS_JPGENC (KEEM_BAY_MSS_START_ID + 5)
> +#define KEEM_BAY_MSS_DTB (KEEM_BAY_MSS_START_ID + 6)
> +#define KEEM_BAY_MSS_BLT (KEEM_BAY_MSS_START_ID + 7)
> +#define KEEM_BAY_MSS_UPA (KEEM_BAY_MSS_START_ID + 8)
> +#define KEEM_BAY_MSS_NCE (KEEM_BAY_MSS_START_ID + 9)
> +#define KEEM_BAY_MSS_CV (KEEM_BAY_MSS_START_ID + 10)
> +#define KEEM_BAY_MSS_ISP (KEEM_BAY_MSS_START_ID + 11)
> +#define KEEM_BAY_MSS_CAM (KEEM_BAY_MSS_START_ID + 12)
> +#define KEEM_BAY_MSS_MAX_ID (KEEM_BAY_MSS_CAM)
> +
> +/* MSS_CPR_AUX region. CLK_ID: 130 - 138 */
> +#define KEEM_BAY_MSS_AUX_START_ID (KEEM_BAY_MSS_MAX_ID + 1)
> +#define KEEM_BAY_MSS_AUX_CIF (KEEM_BAY_MSS_AUX_START_ID + 0)
> +#define KEEM_BAY_MSS_AUX_LCD (KEEM_BAY_MSS_AUX_START_ID + 1)
> +#define KEEM_BAY_MSS_AUX_SLVDS0 (KEEM_BAY_MSS_AUX_START_ID + 2)
> +#define KEEM_BAY_MSS_AUX_SLVDS1 (KEEM_BAY_MSS_AUX_START_ID + 3)
> +#define KEEM_BAY_MSS_AUX_MIPI_TX0 (KEEM_BAY_MSS_AUX_START_ID + 4)
> +#define KEEM_BAY_MSS_AUX_MIPI_TX1 (KEEM_BAY_MSS_AUX_START_ID + 5)
> +#define KEEM_BAY_MSS_AUX_MIPI_ECFG (KEEM_BAY_MSS_AUX_START_ID + 6)
> +#define KEEM_BAY_MSS_AUX_MIPI_CFG (KEEM_BAY_MSS_AUX_START_ID + 7)
> +#define KEEM_BAY_MSS_AUX_JPGENC (KEEM_BAY_MSS_AUX_START_ID + 8)
> +#define KEEM_BAY_MSS_AUX_MAX_ID (KEEM_BAY_MSS_AUX_JPGENC)
> +
> +#define KEEM_BAY_NUM_CLOCKS (KEEM_BAY_MSS_AUX_MAX_ID + 1)
> +
> +#endif /* __DT_BINDINGS_KEEMBAY_CLOCKS_H */
> --
> 2.26.2
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3 2/7] dt-bindings: arm: Add Keem Bay bindings
2020-07-14 21:11 ` Rob Herring
@ 2020-07-15 10:15 ` Daniele Alessandrelli
-1 siblings, 0 replies; 24+ messages in thread
From: Daniele Alessandrelli @ 2020-07-15 10:15 UTC (permalink / raw)
To: Rob Herring
Cc: linux-arm-kernel, SoC Team, Arnd Bergmann, Olof Johansson,
devicetree, linux-kernel, Jassi Brar, Catalin Marinas,
Will Deacon, Paul J. Murphy, Dinh Nguyen, Daniele Alessandrelli
On Tue, 2020-07-14 at 15:11 -0600, Rob Herring wrote:
> On Tue, Jul 14, 2020 at 05:13:00PM +0100, Daniele Alessandrelli
> wrote:
> > From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
> >
> > Document Intel Movidius SoC code-named Keem Bay, along with the
> > Keem Bay
> > EVM board.
> >
> > Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
> > Signed-off-by: Daniele Alessandrelli <
> > daniele.alessandrelli@intel.com>
> > ---
> > .../devicetree/bindings/arm/keembay.yaml | 19
> > +++++++++++++++++++
>
> /intel,keembay.yaml
>
> With that,
>
> Reviewed-by: Rob Herring <robh@kernel.org>
Thanks. I fixed the file name and the "$id:" field below and will re-
submit with your "Reviewed-by" tag.
>
> > 1 file changed, 19 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/arm/keembay.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/arm/keembay.yaml
> > b/Documentation/devicetree/bindings/arm/keembay.yaml
> > new file mode 100644
> > index 000000000000..f81b110046ca
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/keembay.yaml
> > @@ -0,0 +1,19 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/arm/keembay.yaml#
>
> And don't forget this update.
>
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Keem Bay platform device tree bindings
> > +
> > +maintainers:
> > + - Paul J. Murphy <paul.j.murphy@intel.com>
> > + - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
> > +
> > +properties:
> > + compatible:
> > + items:
> > + - enum:
> > + - intel,keembay-evm
> > + - const: intel,keembay
> > +...
> > --
> > 2.26.2
> >
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3 2/7] dt-bindings: arm: Add Keem Bay bindings
@ 2020-07-15 10:15 ` Daniele Alessandrelli
0 siblings, 0 replies; 24+ messages in thread
From: Daniele Alessandrelli @ 2020-07-15 10:15 UTC (permalink / raw)
To: Rob Herring
Cc: devicetree, Arnd Bergmann, Catalin Marinas, Jassi Brar,
linux-kernel, Dinh Nguyen, SoC Team, Olof Johansson,
Paul J. Murphy, Will Deacon, Daniele Alessandrelli,
linux-arm-kernel
On Tue, 2020-07-14 at 15:11 -0600, Rob Herring wrote:
> On Tue, Jul 14, 2020 at 05:13:00PM +0100, Daniele Alessandrelli
> wrote:
> > From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
> >
> > Document Intel Movidius SoC code-named Keem Bay, along with the
> > Keem Bay
> > EVM board.
> >
> > Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
> > Signed-off-by: Daniele Alessandrelli <
> > daniele.alessandrelli@intel.com>
> > ---
> > .../devicetree/bindings/arm/keembay.yaml | 19
> > +++++++++++++++++++
>
> /intel,keembay.yaml
>
> With that,
>
> Reviewed-by: Rob Herring <robh@kernel.org>
Thanks. I fixed the file name and the "$id:" field below and will re-
submit with your "Reviewed-by" tag.
>
> > 1 file changed, 19 insertions(+)
> > create mode 100644
> > Documentation/devicetree/bindings/arm/keembay.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/arm/keembay.yaml
> > b/Documentation/devicetree/bindings/arm/keembay.yaml
> > new file mode 100644
> > index 000000000000..f81b110046ca
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/keembay.yaml
> > @@ -0,0 +1,19 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/arm/keembay.yaml#
>
> And don't forget this update.
>
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Keem Bay platform device tree bindings
> > +
> > +maintainers:
> > + - Paul J. Murphy <paul.j.murphy@intel.com>
> > + - Daniele Alessandrelli <daniele.alessandrelli@intel.com>
> > +
> > +properties:
> > + compatible:
> > + items:
> > + - enum:
> > + - intel,keembay-evm
> > + - const: intel,keembay
> > +...
> > --
> > 2.26.2
> >
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3 3/7] dt-bindings: clock: Add Keem Bay clock IDs
2020-07-14 21:12 ` Rob Herring
@ 2020-07-15 10:44 ` Daniele Alessandrelli
-1 siblings, 0 replies; 24+ messages in thread
From: Daniele Alessandrelli @ 2020-07-15 10:44 UTC (permalink / raw)
To: Rob Herring
Cc: linux-arm-kernel, SoC Team, Arnd Bergmann, Olof Johansson,
devicetree, linux-kernel, Jassi Brar, Catalin Marinas,
Will Deacon, Paul J. Murphy, Dinh Nguyen, Daniele Alessandrelli
On Tue, 2020-07-14 at 15:12 -0600, Rob Herring wrote:
> On Tue, Jul 14, 2020 at 05:13:01PM +0100, Daniele Alessandrelli
> wrote:
> > From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
> >
> > Add clock dt-bindings for Keem Bay SoC.
>
> Where's the binding schema?
I should have specified that they are SCMI clocks.
Anyway, when I split the original patchset (change done in v2) I had to
remove SCMI support from the DT, so these bindings (and the power
domain ones) are currently unused. So, probably, the right thing to do
is to drop them for now. I'll do that in v4.
>
> > Signed-off-by: Daniele Alessandrelli <
> > daniele.alessandrelli@intel.com>
> > ---
> > include/dt-bindings/clock/keembay-clocks.h | 188
> > +++++++++++++++++++++
> > 1 file changed, 188 insertions(+)
> > create mode 100644 include/dt-bindings/clock/keembay-clocks.h
> >
> > diff --git a/include/dt-bindings/clock/keembay-clocks.h
> > b/include/dt-bindings/clock/keembay-clocks.h
> > new file mode 100644
> > index 000000000000..4ad6616ee8e0
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/keembay-clocks.h
> > @@ -0,0 +1,188 @@
> > +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
> > +/*
> > + * Copyright (c) 2020 Intel Corporation.
> > + *
> > + * Device tree defines for clocks in Keem Bay.
> > + */
> > +
> > +#ifndef __DT_BINDINGS_KEEMBAY_CLOCKS_H
> > +#define __DT_BINDINGS_KEEMBAY_CLOCKS_H
> > +
> > +/* CPR_PLL region. CLK_ID: 0 - 11 */
> > +#define KEEM_BAY_A53_PLL_START_ID (0)
> > +#define KEEM_BAY_A53_PLL_0_OUT_0 (KEEM_BAY_A53_PLL_START_ID + 0)
> > +#define KEEM_BAY_A53_PLL_0_OUT_1 (KEEM_BAY_A53_PLL_START_ID + 1)
> > +#define KEEM_BAY_A53_PLL_0_OUT_2 (KEEM_BAY_A53_PLL_START_ID + 2)
> > +#define KEEM_BAY_A53_PLL_0_OUT_3 (KEEM_BAY_A53_PLL_START_ID + 3)
> > +#define KEEM_BAY_A53_PLL_1_OUT_0 (KEEM_BAY_A53_PLL_START_ID + 4)
> > +#define KEEM_BAY_A53_PLL_1_OUT_1 (KEEM_BAY_A53_PLL_START_ID + 5)
> > +#define KEEM_BAY_A53_PLL_1_OUT_2 (KEEM_BAY_A53_PLL_START_ID + 6)
> > +#define KEEM_BAY_A53_PLL_1_OUT_3 (KEEM_BAY_A53_PLL_START_ID + 7)
> > +#define KEEM_BAY_A53_PLL_2_OUT_0 (KEEM_BAY_A53_PLL_START_ID + 8)
> > +#define KEEM_BAY_A53_PLL_2_OUT_1 (KEEM_BAY_A53_PLL_START_ID + 9)
> > +#define KEEM_BAY_A53_PLL_2_OUT_2 (KEEM_BAY_A53_PLL_START_ID + 10)
> > +#define KEEM_BAY_A53_PLL_2_OUT_3 (KEEM_BAY_A53_PLL_START_ID + 11)
> > +#define KEEM_BAY_A53_PLL_MAX_ID (KEEM_BAY_A53_PLL_2_OUT_3)
> > +
> > +/* A53_CPR region. CLK_ID: 12 - 30 */
> > +#define KEEM_BAY_A53_START_ID (KEEM_BAY_A53_PLL_MAX_ID + 1)
> > +#define KEEM_BAY_A53_AON (KEEM_BAY_A53_START_ID + 0)
> > +#define KEEM_BAY_A53_NOC (KEEM_BAY_A53_START_ID + 1)
> > +#define KEEM_BAY_A53_FUSE (KEEM_BAY_A53_START_ID + 2)
> > +#define KEEM_BAY_A53_ROM (KEEM_BAY_A53_START_ID + 3)
> > +#define KEEM_BAY_A53_ICB (KEEM_BAY_A53_START_ID + 4)
> > +#define KEEM_BAY_A53_GIC (KEEM_BAY_A53_START_ID + 5)
> > +#define KEEM_BAY_A53_TIM (KEEM_BAY_A53_START_ID + 6)
> > +#define KEEM_BAY_A53_GPIO (KEEM_BAY_A53_START_ID + 7)
> > +#define KEEM_BAY_A53_JTAG (KEEM_BAY_A53_START_ID + 8)
> > +#define KEEM_BAY_A53_MBIST_0 (KEEM_BAY_A53_START_ID + 9)
> > +#define KEEM_BAY_A53_DSS (KEEM_BAY_A53_START_ID + 10)
> > +#define KEEM_BAY_A53_MSS (KEEM_BAY_A53_START_ID + 11)
> > +#define KEEM_BAY_A53_PSS (KEEM_BAY_A53_START_ID + 12)
> > +#define KEEM_BAY_A53_PCIE (KEEM_BAY_A53_START_ID + 13)
> > +#define KEEM_BAY_A53_VENC (KEEM_BAY_A53_START_ID + 14)
> > +#define KEEM_BAY_A53_VDEC (KEEM_BAY_A53_START_ID + 15)
> > +#define KEEM_BAY_A53_MBIST_1 (KEEM_BAY_A53_START_ID + 16)
> > +#define KEEM_BAY_A53_MBIST_2 (KEEM_BAY_A53_START_ID + 17)
> > +#define KEEM_BAY_A53_MBIST_3 (KEEM_BAY_A53_START_ID + 18)
> > +#define KEEM_BAY_A53_MAX_ID (KEEM_BAY_A53_MBIST_3)
> > +
> > +/* A53_CPR_AUX region. CLK_ID: 31 - 57 */
> > +#define KEEM_BAY_A53_AUX_START_ID (KEEM_BAY_A53_MAX_ID + 1)
> > +#define KEEM_BAY_A53_AUX_32KHZ (KEEM_BAY_A53_AUX_START_ID + 0)
> > +#define KEEM_BAY_A53_AUX_CPR (KEEM_BAY_A53_AUX_START_ID + 1)
> > +#define KEEM_BAY_A53_AUX_TSENS (KEEM_BAY_A53_AUX_START_ID + 2)
> > +#define KEEM_BAY_A53_AUX_GPIO0 (KEEM_BAY_A53_AUX_START_ID + 3)
> > +#define KEEM_BAY_A53_AUX_GPIO1 (KEEM_BAY_A53_AUX_START_ID + 4)
> > +#define KEEM_BAY_A53_AUX_GPIO2 (KEEM_BAY_A53_AUX_START_ID + 5)
> > +#define KEEM_BAY_A53_AUX_GPIO3 (KEEM_BAY_A53_AUX_START_ID + 6)
> > +#define KEEM_BAY_A53_AUX_DDR_REF (KEEM_BAY_A53_AUX_START_ID + 7)
> > +#define KEEM_BAY_A53_AUX_DDR_REF_BYPASS (KEEM_BAY_A53_AUX_START_ID
> > + 8)
> > +#define KEEM_BAY_A53_AUX_RESERVED1 (KEEM_BAY_A53_AUX_START_ID + 9)
> > +#define KEEM_BAY_A53_AUX_VENC (KEEM_BAY_A53_AUX_START_ID + 10)
> > +#define KEEM_BAY_A53_AUX_VDEC (KEEM_BAY_A53_AUX_START_ID + 11)
> > +#define KEEM_BAY_A53_AUX_USOC_USB_CTRL (KEEM_BAY_A53_AUX_START_ID
> > + 12)
> > +#define KEEM_BAY_A53_AUX_USB (KEEM_BAY_A53_AUX_START_ID + 13)
> > +#define KEEM_BAY_A53_AUX_USB_REF (KEEM_BAY_A53_AUX_START_ID + 14)
> > +#define KEEM_BAY_A53_AUX_USB_ALT_REF (KEEM_BAY_A53_AUX_START_ID +
> > 15)
> > +#define KEEM_BAY_A53_AUX_USB_SUSPEND (KEEM_BAY_A53_AUX_START_ID +
> > 16)
> > +#define KEEM_BAY_A53_AUX_RESERVED2 (KEEM_BAY_A53_AUX_START_ID +
> > 17)
> > +#define KEEM_BAY_A53_AUX_PCIE (KEEM_BAY_A53_AUX_START_ID + 18)
> > +#define KEEM_BAY_A53_AUX_DBG_CLK (KEEM_BAY_A53_AUX_START_ID + 19)
> > +#define KEEM_BAY_A53_AUX_DBG_TRACE (KEEM_BAY_A53_AUX_START_ID +
> > 20)
> > +#define KEEM_BAY_A53_AUX_DBG_DAP (KEEM_BAY_A53_AUX_START_ID + 21)
> > +#define KEEM_BAY_A53_AUX_ARM_CLKIN (KEEM_BAY_A53_AUX_START_ID +
> > 22)
> > +#define KEEM_BAY_A53_AUX_ARM_AXI (KEEM_BAY_A53_AUX_START_ID + 23)
> > +#define KEEM_BAY_A53_AUX_USOC (KEEM_BAY_A53_AUX_START_ID + 24)
> > +#define KEEM_BAY_A53_AUX_USOC_REF (KEEM_BAY_A53_AUX_START_ID + 25)
> > +#define KEEM_BAY_A53_AUX_USOC_ALT_REF (KEEM_BAY_A53_AUX_START_ID +
> > 26)
> > +#define KEEM_BAY_A53_AUX_MAX_ID (KEEM_BAY_A53_AUX_USOC_ALT_REF)
> > +
> > +/* PSS_CPR region CLK_ID: CLK_ID: 58 - 82 */
> > +#define KEEM_BAY_PSS_START_ID (KEEM_BAY_A53_AUX_MAX_ID + 1)
> > +#define KEEM_BAY_PSS_I2C0 (KEEM_BAY_PSS_START_ID + 0)
> > +#define KEEM_BAY_PSS_I2C1 (KEEM_BAY_PSS_START_ID + 1)
> > +#define KEEM_BAY_PSS_I2C2 (KEEM_BAY_PSS_START_ID + 2)
> > +#define KEEM_BAY_PSS_I2C3 (KEEM_BAY_PSS_START_ID + 3)
> > +#define KEEM_BAY_PSS_I2C4 (KEEM_BAY_PSS_START_ID + 4)
> > +#define KEEM_BAY_PSS_SD0 (KEEM_BAY_PSS_START_ID + 5)
> > +#define KEEM_BAY_PSS_SD1 (KEEM_BAY_PSS_START_ID + 6)
> > +#define KEEM_BAY_PSS_EMMC (KEEM_BAY_PSS_START_ID + 7)
> > +#define KEEM_BAY_PSS_AXI_DMA (KEEM_BAY_PSS_START_ID + 8)
> > +#define KEEM_BAY_PSS_SPI0 (KEEM_BAY_PSS_START_ID + 9)
> > +#define KEEM_BAY_PSS_SPI1 (KEEM_BAY_PSS_START_ID + 10)
> > +#define KEEM_BAY_PSS_SPI2 (KEEM_BAY_PSS_START_ID + 11)
> > +#define KEEM_BAY_PSS_SPI3 (KEEM_BAY_PSS_START_ID + 12)
> > +#define KEEM_BAY_PSS_I2S0 (KEEM_BAY_PSS_START_ID + 13)
> > +#define KEEM_BAY_PSS_I2S1 (KEEM_BAY_PSS_START_ID + 14)
> > +#define KEEM_BAY_PSS_I2S2 (KEEM_BAY_PSS_START_ID + 15)
> > +#define KEEM_BAY_PSS_I2S3 (KEEM_BAY_PSS_START_ID + 16)
> > +#define KEEM_BAY_PSS_UART0 (KEEM_BAY_PSS_START_ID + 17)
> > +#define KEEM_BAY_PSS_UART1 (KEEM_BAY_PSS_START_ID + 18)
> > +#define KEEM_BAY_PSS_UART2 (KEEM_BAY_PSS_START_ID + 19)
> > +#define KEEM_BAY_PSS_UART3 (KEEM_BAY_PSS_START_ID + 20)
> > +#define KEEM_BAY_PSS_I3C0 (KEEM_BAY_PSS_START_ID + 21)
> > +#define KEEM_BAY_PSS_I3C1 (KEEM_BAY_PSS_START_ID + 22)
> > +#define KEEM_BAY_PSS_I3C2 (KEEM_BAY_PSS_START_ID + 23)
> > +#define KEEM_BAY_PSS_GBE (KEEM_BAY_PSS_START_ID + 24)
> > +#define KEEM_BAY_PSS_MAX_ID (KEEM_BAY_PSS_GBE)
> > +
> > +/* PSS_CPR_AUX region. CLK_ID: 83 - 97 */
> > +#define KEEM_BAY_PSS_AUX_START_ID (KEEM_BAY_PSS_MAX_ID + 1)
> > +#define KEEM_BAY_PSS_AUX_I2S0 (KEEM_BAY_PSS_AUX_START_ID + 0)
> > +#define KEEM_BAY_PSS_AUX_I2S1 (KEEM_BAY_PSS_AUX_START_ID + 1)
> > +#define KEEM_BAY_PSS_AUX_I2S2 (KEEM_BAY_PSS_AUX_START_ID + 2)
> > +#define KEEM_BAY_PSS_AUX_I2S3 (KEEM_BAY_PSS_AUX_START_ID + 3)
> > +#define KEEM_BAY_PSS_AUX_UART0 (KEEM_BAY_PSS_AUX_START_ID + 4)
> > +#define KEEM_BAY_PSS_AUX_UART1 (KEEM_BAY_PSS_AUX_START_ID + 5)
> > +#define KEEM_BAY_PSS_AUX_UART2 (KEEM_BAY_PSS_AUX_START_ID + 6)
> > +#define KEEM_BAY_PSS_AUX_UART3 (KEEM_BAY_PSS_AUX_START_ID + 7)
> > +#define KEEM_BAY_PSS_AUX_SD0 (KEEM_BAY_PSS_AUX_START_ID + 8)
> > +#define KEEM_BAY_PSS_AUX_SD1 (KEEM_BAY_PSS_AUX_START_ID + 9)
> > +#define KEEM_BAY_PSS_AUX_EMMC (KEEM_BAY_PSS_AUX_START_ID + 10)
> > +#define KEEM_BAY_PSS_AUX_TRNG (KEEM_BAY_PSS_AUX_START_ID + 11)
> > +#define KEEM_BAY_PSS_AUX_OCS (KEEM_BAY_PSS_AUX_START_ID + 12)
> > +#define KEEM_BAY_PSS_AUX_GBE_PTP (KEEM_BAY_PSS_AUX_START_ID + 13)
> > +#define KEEM_BAY_PSS_AUX_GBE_TX (KEEM_BAY_PSS_AUX_START_ID + 14)
> > +#define KEEM_BAY_PSS_AUX_MAX_ID (KEEM_BAY_PSS_AUX_GBE_TX)
> > +
> > +/* DSS_CPR region. CLK_ID: 98 - 109 */
> > +#define KEEM_BAY_DSS_START_ID (KEEM_BAY_PSS_AUX_MAX_ID + 1)
> > +#define KEEM_BAY_DSS_SYS (KEEM_BAY_DSS_START_ID + 0)
> > +#define KEEM_BAY_DSS_DEC400 (KEEM_BAY_DSS_START_ID + 1)
> > +#define KEEM_BAY_DSS_TSENSE (KEEM_BAY_DSS_START_ID + 2)
> > +#define KEEM_BAY_DSS_BUS_0 (KEEM_BAY_DSS_START_ID + 3)
> > +#define KEEM_BAY_DSS_CORE_0 (KEEM_BAY_DSS_START_ID + 4)
> > +#define KEEM_BAY_DSS_REF_0 (KEEM_BAY_DSS_START_ID + 5)
> > +#define KEEM_BAY_DSS_REF_BYP_0 (KEEM_BAY_DSS_START_ID + 6)
> > +#define KEEM_BAY_DSS_BUS_1 (KEEM_BAY_DSS_START_ID + 7)
> > +#define KEEM_BAY_DSS_CORE_1 (KEEM_BAY_DSS_START_ID + 8)
> > +#define KEEM_BAY_DSS_REF_1 (KEEM_BAY_DSS_START_ID + 9)
> > +#define KEEM_BAY_DSS_REF_BYP_1 (KEEM_BAY_DSS_START_ID + 10)
> > +#define KEEM_BAY_DSS_MMU500 (KEEM_BAY_DSS_START_ID + 11)
> > +#define KEEM_BAY_DSS_MAX_ID (KEEM_BAY_DSS_MMU500)
> > +
> > +/* USS_CPR region. CLK_ID: 110 - 116 */
> > +#define KEEM_BAY_USS_START_ID (KEEM_BAY_DSS_MAX_ID + 1)
> > +#define KEEM_BAY_USS_SYS (KEEM_BAY_USS_START_ID + 0)
> > +#define KEEM_BAY_USS_REF (KEEM_BAY_USS_START_ID + 1)
> > +#define KEEM_BAY_USS_ALT_REF (KEEM_BAY_USS_START_ID + 2)
> > +#define KEEM_BAY_USS_SUSPEND (KEEM_BAY_USS_START_ID + 3)
> > +#define KEEM_BAY_USS_CORE (KEEM_BAY_USS_START_ID + 4)
> > +#define KEEM_BAY_USS_LOW_JIT (KEEM_BAY_USS_START_ID + 5)
> > +#define KEEM_BAY_USS_PHY_TST (KEEM_BAY_USS_START_ID + 6)
> > +#define KEEM_BAY_USS_MAX_ID (KEEM_BAY_USS_PHY_TST)
> > +
> > +/* MSS_CPR region. CLK_ID: 117 - 129 */
> > +#define KEEM_BAY_MSS_START_ID (KEEM_BAY_USS_MAX_ID + 1)
> > +#define KEEM_BAY_MSS_CPU (KEEM_BAY_MSS_START_ID + 0)
> > +#define KEEM_BAY_MSS_CPU_DSU (KEEM_BAY_MSS_START_ID + 1)
> > +#define KEEM_BAY_MSS_CPU_L2C (KEEM_BAY_MSS_START_ID + 2)
> > +#define KEEM_BAY_MSS_CPU_ICB (KEEM_BAY_MSS_START_ID + 3)
> > +#define KEEM_BAY_MSS_CPU_TIM (KEEM_BAY_MSS_START_ID + 4)
> > +#define KEEM_BAY_MSS_JPGENC (KEEM_BAY_MSS_START_ID + 5)
> > +#define KEEM_BAY_MSS_DTB (KEEM_BAY_MSS_START_ID + 6)
> > +#define KEEM_BAY_MSS_BLT (KEEM_BAY_MSS_START_ID + 7)
> > +#define KEEM_BAY_MSS_UPA (KEEM_BAY_MSS_START_ID + 8)
> > +#define KEEM_BAY_MSS_NCE (KEEM_BAY_MSS_START_ID + 9)
> > +#define KEEM_BAY_MSS_CV (KEEM_BAY_MSS_START_ID + 10)
> > +#define KEEM_BAY_MSS_ISP (KEEM_BAY_MSS_START_ID + 11)
> > +#define KEEM_BAY_MSS_CAM (KEEM_BAY_MSS_START_ID + 12)
> > +#define KEEM_BAY_MSS_MAX_ID (KEEM_BAY_MSS_CAM)
> > +
> > +/* MSS_CPR_AUX region. CLK_ID: 130 - 138 */
> > +#define KEEM_BAY_MSS_AUX_START_ID (KEEM_BAY_MSS_MAX_ID + 1)
> > +#define KEEM_BAY_MSS_AUX_CIF (KEEM_BAY_MSS_AUX_START_ID + 0)
> > +#define KEEM_BAY_MSS_AUX_LCD (KEEM_BAY_MSS_AUX_START_ID + 1)
> > +#define KEEM_BAY_MSS_AUX_SLVDS0 (KEEM_BAY_MSS_AUX_START_ID + 2)
> > +#define KEEM_BAY_MSS_AUX_SLVDS1 (KEEM_BAY_MSS_AUX_START_ID + 3)
> > +#define KEEM_BAY_MSS_AUX_MIPI_TX0 (KEEM_BAY_MSS_AUX_START_ID + 4)
> > +#define KEEM_BAY_MSS_AUX_MIPI_TX1 (KEEM_BAY_MSS_AUX_START_ID + 5)
> > +#define KEEM_BAY_MSS_AUX_MIPI_ECFG (KEEM_BAY_MSS_AUX_START_ID + 6)
> > +#define KEEM_BAY_MSS_AUX_MIPI_CFG (KEEM_BAY_MSS_AUX_START_ID + 7)
> > +#define KEEM_BAY_MSS_AUX_JPGENC (KEEM_BAY_MSS_AUX_START_ID + 8)
> > +#define KEEM_BAY_MSS_AUX_MAX_ID (KEEM_BAY_MSS_AUX_JPGENC)
> > +
> > +#define KEEM_BAY_NUM_CLOCKS (KEEM_BAY_MSS_AUX_MAX_ID + 1)
> > +
> > +#endif /* __DT_BINDINGS_KEEMBAY_CLOCKS_H */
> > --
> > 2.26.2
> >
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [PATCH v3 3/7] dt-bindings: clock: Add Keem Bay clock IDs
@ 2020-07-15 10:44 ` Daniele Alessandrelli
0 siblings, 0 replies; 24+ messages in thread
From: Daniele Alessandrelli @ 2020-07-15 10:44 UTC (permalink / raw)
To: Rob Herring
Cc: devicetree, Arnd Bergmann, Catalin Marinas, Jassi Brar,
linux-kernel, Dinh Nguyen, SoC Team, Olof Johansson,
Paul J. Murphy, Will Deacon, Daniele Alessandrelli,
linux-arm-kernel
On Tue, 2020-07-14 at 15:12 -0600, Rob Herring wrote:
> On Tue, Jul 14, 2020 at 05:13:01PM +0100, Daniele Alessandrelli
> wrote:
> > From: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
> >
> > Add clock dt-bindings for Keem Bay SoC.
>
> Where's the binding schema?
I should have specified that they are SCMI clocks.
Anyway, when I split the original patchset (change done in v2) I had to
remove SCMI support from the DT, so these bindings (and the power
domain ones) are currently unused. So, probably, the right thing to do
is to drop them for now. I'll do that in v4.
>
> > Signed-off-by: Daniele Alessandrelli <
> > daniele.alessandrelli@intel.com>
> > ---
> > include/dt-bindings/clock/keembay-clocks.h | 188
> > +++++++++++++++++++++
> > 1 file changed, 188 insertions(+)
> > create mode 100644 include/dt-bindings/clock/keembay-clocks.h
> >
> > diff --git a/include/dt-bindings/clock/keembay-clocks.h
> > b/include/dt-bindings/clock/keembay-clocks.h
> > new file mode 100644
> > index 000000000000..4ad6616ee8e0
> > --- /dev/null
> > +++ b/include/dt-bindings/clock/keembay-clocks.h
> > @@ -0,0 +1,188 @@
> > +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
> > +/*
> > + * Copyright (c) 2020 Intel Corporation.
> > + *
> > + * Device tree defines for clocks in Keem Bay.
> > + */
> > +
> > +#ifndef __DT_BINDINGS_KEEMBAY_CLOCKS_H
> > +#define __DT_BINDINGS_KEEMBAY_CLOCKS_H
> > +
> > +/* CPR_PLL region. CLK_ID: 0 - 11 */
> > +#define KEEM_BAY_A53_PLL_START_ID (0)
> > +#define KEEM_BAY_A53_PLL_0_OUT_0 (KEEM_BAY_A53_PLL_START_ID + 0)
> > +#define KEEM_BAY_A53_PLL_0_OUT_1 (KEEM_BAY_A53_PLL_START_ID + 1)
> > +#define KEEM_BAY_A53_PLL_0_OUT_2 (KEEM_BAY_A53_PLL_START_ID + 2)
> > +#define KEEM_BAY_A53_PLL_0_OUT_3 (KEEM_BAY_A53_PLL_START_ID + 3)
> > +#define KEEM_BAY_A53_PLL_1_OUT_0 (KEEM_BAY_A53_PLL_START_ID + 4)
> > +#define KEEM_BAY_A53_PLL_1_OUT_1 (KEEM_BAY_A53_PLL_START_ID + 5)
> > +#define KEEM_BAY_A53_PLL_1_OUT_2 (KEEM_BAY_A53_PLL_START_ID + 6)
> > +#define KEEM_BAY_A53_PLL_1_OUT_3 (KEEM_BAY_A53_PLL_START_ID + 7)
> > +#define KEEM_BAY_A53_PLL_2_OUT_0 (KEEM_BAY_A53_PLL_START_ID + 8)
> > +#define KEEM_BAY_A53_PLL_2_OUT_1 (KEEM_BAY_A53_PLL_START_ID + 9)
> > +#define KEEM_BAY_A53_PLL_2_OUT_2 (KEEM_BAY_A53_PLL_START_ID + 10)
> > +#define KEEM_BAY_A53_PLL_2_OUT_3 (KEEM_BAY_A53_PLL_START_ID + 11)
> > +#define KEEM_BAY_A53_PLL_MAX_ID (KEEM_BAY_A53_PLL_2_OUT_3)
> > +
> > +/* A53_CPR region. CLK_ID: 12 - 30 */
> > +#define KEEM_BAY_A53_START_ID (KEEM_BAY_A53_PLL_MAX_ID + 1)
> > +#define KEEM_BAY_A53_AON (KEEM_BAY_A53_START_ID + 0)
> > +#define KEEM_BAY_A53_NOC (KEEM_BAY_A53_START_ID + 1)
> > +#define KEEM_BAY_A53_FUSE (KEEM_BAY_A53_START_ID + 2)
> > +#define KEEM_BAY_A53_ROM (KEEM_BAY_A53_START_ID + 3)
> > +#define KEEM_BAY_A53_ICB (KEEM_BAY_A53_START_ID + 4)
> > +#define KEEM_BAY_A53_GIC (KEEM_BAY_A53_START_ID + 5)
> > +#define KEEM_BAY_A53_TIM (KEEM_BAY_A53_START_ID + 6)
> > +#define KEEM_BAY_A53_GPIO (KEEM_BAY_A53_START_ID + 7)
> > +#define KEEM_BAY_A53_JTAG (KEEM_BAY_A53_START_ID + 8)
> > +#define KEEM_BAY_A53_MBIST_0 (KEEM_BAY_A53_START_ID + 9)
> > +#define KEEM_BAY_A53_DSS (KEEM_BAY_A53_START_ID + 10)
> > +#define KEEM_BAY_A53_MSS (KEEM_BAY_A53_START_ID + 11)
> > +#define KEEM_BAY_A53_PSS (KEEM_BAY_A53_START_ID + 12)
> > +#define KEEM_BAY_A53_PCIE (KEEM_BAY_A53_START_ID + 13)
> > +#define KEEM_BAY_A53_VENC (KEEM_BAY_A53_START_ID + 14)
> > +#define KEEM_BAY_A53_VDEC (KEEM_BAY_A53_START_ID + 15)
> > +#define KEEM_BAY_A53_MBIST_1 (KEEM_BAY_A53_START_ID + 16)
> > +#define KEEM_BAY_A53_MBIST_2 (KEEM_BAY_A53_START_ID + 17)
> > +#define KEEM_BAY_A53_MBIST_3 (KEEM_BAY_A53_START_ID + 18)
> > +#define KEEM_BAY_A53_MAX_ID (KEEM_BAY_A53_MBIST_3)
> > +
> > +/* A53_CPR_AUX region. CLK_ID: 31 - 57 */
> > +#define KEEM_BAY_A53_AUX_START_ID (KEEM_BAY_A53_MAX_ID + 1)
> > +#define KEEM_BAY_A53_AUX_32KHZ (KEEM_BAY_A53_AUX_START_ID + 0)
> > +#define KEEM_BAY_A53_AUX_CPR (KEEM_BAY_A53_AUX_START_ID + 1)
> > +#define KEEM_BAY_A53_AUX_TSENS (KEEM_BAY_A53_AUX_START_ID + 2)
> > +#define KEEM_BAY_A53_AUX_GPIO0 (KEEM_BAY_A53_AUX_START_ID + 3)
> > +#define KEEM_BAY_A53_AUX_GPIO1 (KEEM_BAY_A53_AUX_START_ID + 4)
> > +#define KEEM_BAY_A53_AUX_GPIO2 (KEEM_BAY_A53_AUX_START_ID + 5)
> > +#define KEEM_BAY_A53_AUX_GPIO3 (KEEM_BAY_A53_AUX_START_ID + 6)
> > +#define KEEM_BAY_A53_AUX_DDR_REF (KEEM_BAY_A53_AUX_START_ID + 7)
> > +#define KEEM_BAY_A53_AUX_DDR_REF_BYPASS (KEEM_BAY_A53_AUX_START_ID
> > + 8)
> > +#define KEEM_BAY_A53_AUX_RESERVED1 (KEEM_BAY_A53_AUX_START_ID + 9)
> > +#define KEEM_BAY_A53_AUX_VENC (KEEM_BAY_A53_AUX_START_ID + 10)
> > +#define KEEM_BAY_A53_AUX_VDEC (KEEM_BAY_A53_AUX_START_ID + 11)
> > +#define KEEM_BAY_A53_AUX_USOC_USB_CTRL (KEEM_BAY_A53_AUX_START_ID
> > + 12)
> > +#define KEEM_BAY_A53_AUX_USB (KEEM_BAY_A53_AUX_START_ID + 13)
> > +#define KEEM_BAY_A53_AUX_USB_REF (KEEM_BAY_A53_AUX_START_ID + 14)
> > +#define KEEM_BAY_A53_AUX_USB_ALT_REF (KEEM_BAY_A53_AUX_START_ID +
> > 15)
> > +#define KEEM_BAY_A53_AUX_USB_SUSPEND (KEEM_BAY_A53_AUX_START_ID +
> > 16)
> > +#define KEEM_BAY_A53_AUX_RESERVED2 (KEEM_BAY_A53_AUX_START_ID +
> > 17)
> > +#define KEEM_BAY_A53_AUX_PCIE (KEEM_BAY_A53_AUX_START_ID + 18)
> > +#define KEEM_BAY_A53_AUX_DBG_CLK (KEEM_BAY_A53_AUX_START_ID + 19)
> > +#define KEEM_BAY_A53_AUX_DBG_TRACE (KEEM_BAY_A53_AUX_START_ID +
> > 20)
> > +#define KEEM_BAY_A53_AUX_DBG_DAP (KEEM_BAY_A53_AUX_START_ID + 21)
> > +#define KEEM_BAY_A53_AUX_ARM_CLKIN (KEEM_BAY_A53_AUX_START_ID +
> > 22)
> > +#define KEEM_BAY_A53_AUX_ARM_AXI (KEEM_BAY_A53_AUX_START_ID + 23)
> > +#define KEEM_BAY_A53_AUX_USOC (KEEM_BAY_A53_AUX_START_ID + 24)
> > +#define KEEM_BAY_A53_AUX_USOC_REF (KEEM_BAY_A53_AUX_START_ID + 25)
> > +#define KEEM_BAY_A53_AUX_USOC_ALT_REF (KEEM_BAY_A53_AUX_START_ID +
> > 26)
> > +#define KEEM_BAY_A53_AUX_MAX_ID (KEEM_BAY_A53_AUX_USOC_ALT_REF)
> > +
> > +/* PSS_CPR region CLK_ID: CLK_ID: 58 - 82 */
> > +#define KEEM_BAY_PSS_START_ID (KEEM_BAY_A53_AUX_MAX_ID + 1)
> > +#define KEEM_BAY_PSS_I2C0 (KEEM_BAY_PSS_START_ID + 0)
> > +#define KEEM_BAY_PSS_I2C1 (KEEM_BAY_PSS_START_ID + 1)
> > +#define KEEM_BAY_PSS_I2C2 (KEEM_BAY_PSS_START_ID + 2)
> > +#define KEEM_BAY_PSS_I2C3 (KEEM_BAY_PSS_START_ID + 3)
> > +#define KEEM_BAY_PSS_I2C4 (KEEM_BAY_PSS_START_ID + 4)
> > +#define KEEM_BAY_PSS_SD0 (KEEM_BAY_PSS_START_ID + 5)
> > +#define KEEM_BAY_PSS_SD1 (KEEM_BAY_PSS_START_ID + 6)
> > +#define KEEM_BAY_PSS_EMMC (KEEM_BAY_PSS_START_ID + 7)
> > +#define KEEM_BAY_PSS_AXI_DMA (KEEM_BAY_PSS_START_ID + 8)
> > +#define KEEM_BAY_PSS_SPI0 (KEEM_BAY_PSS_START_ID + 9)
> > +#define KEEM_BAY_PSS_SPI1 (KEEM_BAY_PSS_START_ID + 10)
> > +#define KEEM_BAY_PSS_SPI2 (KEEM_BAY_PSS_START_ID + 11)
> > +#define KEEM_BAY_PSS_SPI3 (KEEM_BAY_PSS_START_ID + 12)
> > +#define KEEM_BAY_PSS_I2S0 (KEEM_BAY_PSS_START_ID + 13)
> > +#define KEEM_BAY_PSS_I2S1 (KEEM_BAY_PSS_START_ID + 14)
> > +#define KEEM_BAY_PSS_I2S2 (KEEM_BAY_PSS_START_ID + 15)
> > +#define KEEM_BAY_PSS_I2S3 (KEEM_BAY_PSS_START_ID + 16)
> > +#define KEEM_BAY_PSS_UART0 (KEEM_BAY_PSS_START_ID + 17)
> > +#define KEEM_BAY_PSS_UART1 (KEEM_BAY_PSS_START_ID + 18)
> > +#define KEEM_BAY_PSS_UART2 (KEEM_BAY_PSS_START_ID + 19)
> > +#define KEEM_BAY_PSS_UART3 (KEEM_BAY_PSS_START_ID + 20)
> > +#define KEEM_BAY_PSS_I3C0 (KEEM_BAY_PSS_START_ID + 21)
> > +#define KEEM_BAY_PSS_I3C1 (KEEM_BAY_PSS_START_ID + 22)
> > +#define KEEM_BAY_PSS_I3C2 (KEEM_BAY_PSS_START_ID + 23)
> > +#define KEEM_BAY_PSS_GBE (KEEM_BAY_PSS_START_ID + 24)
> > +#define KEEM_BAY_PSS_MAX_ID (KEEM_BAY_PSS_GBE)
> > +
> > +/* PSS_CPR_AUX region. CLK_ID: 83 - 97 */
> > +#define KEEM_BAY_PSS_AUX_START_ID (KEEM_BAY_PSS_MAX_ID + 1)
> > +#define KEEM_BAY_PSS_AUX_I2S0 (KEEM_BAY_PSS_AUX_START_ID + 0)
> > +#define KEEM_BAY_PSS_AUX_I2S1 (KEEM_BAY_PSS_AUX_START_ID + 1)
> > +#define KEEM_BAY_PSS_AUX_I2S2 (KEEM_BAY_PSS_AUX_START_ID + 2)
> > +#define KEEM_BAY_PSS_AUX_I2S3 (KEEM_BAY_PSS_AUX_START_ID + 3)
> > +#define KEEM_BAY_PSS_AUX_UART0 (KEEM_BAY_PSS_AUX_START_ID + 4)
> > +#define KEEM_BAY_PSS_AUX_UART1 (KEEM_BAY_PSS_AUX_START_ID + 5)
> > +#define KEEM_BAY_PSS_AUX_UART2 (KEEM_BAY_PSS_AUX_START_ID + 6)
> > +#define KEEM_BAY_PSS_AUX_UART3 (KEEM_BAY_PSS_AUX_START_ID + 7)
> > +#define KEEM_BAY_PSS_AUX_SD0 (KEEM_BAY_PSS_AUX_START_ID + 8)
> > +#define KEEM_BAY_PSS_AUX_SD1 (KEEM_BAY_PSS_AUX_START_ID + 9)
> > +#define KEEM_BAY_PSS_AUX_EMMC (KEEM_BAY_PSS_AUX_START_ID + 10)
> > +#define KEEM_BAY_PSS_AUX_TRNG (KEEM_BAY_PSS_AUX_START_ID + 11)
> > +#define KEEM_BAY_PSS_AUX_OCS (KEEM_BAY_PSS_AUX_START_ID + 12)
> > +#define KEEM_BAY_PSS_AUX_GBE_PTP (KEEM_BAY_PSS_AUX_START_ID + 13)
> > +#define KEEM_BAY_PSS_AUX_GBE_TX (KEEM_BAY_PSS_AUX_START_ID + 14)
> > +#define KEEM_BAY_PSS_AUX_MAX_ID (KEEM_BAY_PSS_AUX_GBE_TX)
> > +
> > +/* DSS_CPR region. CLK_ID: 98 - 109 */
> > +#define KEEM_BAY_DSS_START_ID (KEEM_BAY_PSS_AUX_MAX_ID + 1)
> > +#define KEEM_BAY_DSS_SYS (KEEM_BAY_DSS_START_ID + 0)
> > +#define KEEM_BAY_DSS_DEC400 (KEEM_BAY_DSS_START_ID + 1)
> > +#define KEEM_BAY_DSS_TSENSE (KEEM_BAY_DSS_START_ID + 2)
> > +#define KEEM_BAY_DSS_BUS_0 (KEEM_BAY_DSS_START_ID + 3)
> > +#define KEEM_BAY_DSS_CORE_0 (KEEM_BAY_DSS_START_ID + 4)
> > +#define KEEM_BAY_DSS_REF_0 (KEEM_BAY_DSS_START_ID + 5)
> > +#define KEEM_BAY_DSS_REF_BYP_0 (KEEM_BAY_DSS_START_ID + 6)
> > +#define KEEM_BAY_DSS_BUS_1 (KEEM_BAY_DSS_START_ID + 7)
> > +#define KEEM_BAY_DSS_CORE_1 (KEEM_BAY_DSS_START_ID + 8)
> > +#define KEEM_BAY_DSS_REF_1 (KEEM_BAY_DSS_START_ID + 9)
> > +#define KEEM_BAY_DSS_REF_BYP_1 (KEEM_BAY_DSS_START_ID + 10)
> > +#define KEEM_BAY_DSS_MMU500 (KEEM_BAY_DSS_START_ID + 11)
> > +#define KEEM_BAY_DSS_MAX_ID (KEEM_BAY_DSS_MMU500)
> > +
> > +/* USS_CPR region. CLK_ID: 110 - 116 */
> > +#define KEEM_BAY_USS_START_ID (KEEM_BAY_DSS_MAX_ID + 1)
> > +#define KEEM_BAY_USS_SYS (KEEM_BAY_USS_START_ID + 0)
> > +#define KEEM_BAY_USS_REF (KEEM_BAY_USS_START_ID + 1)
> > +#define KEEM_BAY_USS_ALT_REF (KEEM_BAY_USS_START_ID + 2)
> > +#define KEEM_BAY_USS_SUSPEND (KEEM_BAY_USS_START_ID + 3)
> > +#define KEEM_BAY_USS_CORE (KEEM_BAY_USS_START_ID + 4)
> > +#define KEEM_BAY_USS_LOW_JIT (KEEM_BAY_USS_START_ID + 5)
> > +#define KEEM_BAY_USS_PHY_TST (KEEM_BAY_USS_START_ID + 6)
> > +#define KEEM_BAY_USS_MAX_ID (KEEM_BAY_USS_PHY_TST)
> > +
> > +/* MSS_CPR region. CLK_ID: 117 - 129 */
> > +#define KEEM_BAY_MSS_START_ID (KEEM_BAY_USS_MAX_ID + 1)
> > +#define KEEM_BAY_MSS_CPU (KEEM_BAY_MSS_START_ID + 0)
> > +#define KEEM_BAY_MSS_CPU_DSU (KEEM_BAY_MSS_START_ID + 1)
> > +#define KEEM_BAY_MSS_CPU_L2C (KEEM_BAY_MSS_START_ID + 2)
> > +#define KEEM_BAY_MSS_CPU_ICB (KEEM_BAY_MSS_START_ID + 3)
> > +#define KEEM_BAY_MSS_CPU_TIM (KEEM_BAY_MSS_START_ID + 4)
> > +#define KEEM_BAY_MSS_JPGENC (KEEM_BAY_MSS_START_ID + 5)
> > +#define KEEM_BAY_MSS_DTB (KEEM_BAY_MSS_START_ID + 6)
> > +#define KEEM_BAY_MSS_BLT (KEEM_BAY_MSS_START_ID + 7)
> > +#define KEEM_BAY_MSS_UPA (KEEM_BAY_MSS_START_ID + 8)
> > +#define KEEM_BAY_MSS_NCE (KEEM_BAY_MSS_START_ID + 9)
> > +#define KEEM_BAY_MSS_CV (KEEM_BAY_MSS_START_ID + 10)
> > +#define KEEM_BAY_MSS_ISP (KEEM_BAY_MSS_START_ID + 11)
> > +#define KEEM_BAY_MSS_CAM (KEEM_BAY_MSS_START_ID + 12)
> > +#define KEEM_BAY_MSS_MAX_ID (KEEM_BAY_MSS_CAM)
> > +
> > +/* MSS_CPR_AUX region. CLK_ID: 130 - 138 */
> > +#define KEEM_BAY_MSS_AUX_START_ID (KEEM_BAY_MSS_MAX_ID + 1)
> > +#define KEEM_BAY_MSS_AUX_CIF (KEEM_BAY_MSS_AUX_START_ID + 0)
> > +#define KEEM_BAY_MSS_AUX_LCD (KEEM_BAY_MSS_AUX_START_ID + 1)
> > +#define KEEM_BAY_MSS_AUX_SLVDS0 (KEEM_BAY_MSS_AUX_START_ID + 2)
> > +#define KEEM_BAY_MSS_AUX_SLVDS1 (KEEM_BAY_MSS_AUX_START_ID + 3)
> > +#define KEEM_BAY_MSS_AUX_MIPI_TX0 (KEEM_BAY_MSS_AUX_START_ID + 4)
> > +#define KEEM_BAY_MSS_AUX_MIPI_TX1 (KEEM_BAY_MSS_AUX_START_ID + 5)
> > +#define KEEM_BAY_MSS_AUX_MIPI_ECFG (KEEM_BAY_MSS_AUX_START_ID + 6)
> > +#define KEEM_BAY_MSS_AUX_MIPI_CFG (KEEM_BAY_MSS_AUX_START_ID + 7)
> > +#define KEEM_BAY_MSS_AUX_JPGENC (KEEM_BAY_MSS_AUX_START_ID + 8)
> > +#define KEEM_BAY_MSS_AUX_MAX_ID (KEEM_BAY_MSS_AUX_JPGENC)
> > +
> > +#define KEEM_BAY_NUM_CLOCKS (KEEM_BAY_MSS_AUX_MAX_ID + 1)
> > +
> > +#endif /* __DT_BINDINGS_KEEMBAY_CLOCKS_H */
> > --
> > 2.26.2
> >
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 24+ messages in thread
end of thread, other threads:[~2020-07-15 10:46 UTC | newest]
Thread overview: 24+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-14 16:12 [PATCH v3 0/7] Add initial Keem Bay SoC / Board support Daniele Alessandrelli
2020-07-14 16:12 ` Daniele Alessandrelli
2020-07-14 16:12 ` [PATCH v3 1/7] arm64: Add config for Keem Bay SoC Daniele Alessandrelli
2020-07-14 16:12 ` Daniele Alessandrelli
2020-07-14 16:13 ` [PATCH v3 2/7] dt-bindings: arm: Add Keem Bay bindings Daniele Alessandrelli
2020-07-14 16:13 ` Daniele Alessandrelli
2020-07-14 21:11 ` Rob Herring
2020-07-14 21:11 ` Rob Herring
2020-07-15 10:15 ` Daniele Alessandrelli
2020-07-15 10:15 ` Daniele Alessandrelli
2020-07-14 16:13 ` [PATCH v3 3/7] dt-bindings: clock: Add Keem Bay clock IDs Daniele Alessandrelli
2020-07-14 16:13 ` Daniele Alessandrelli
2020-07-14 21:12 ` Rob Herring
2020-07-14 21:12 ` Rob Herring
2020-07-15 10:44 ` Daniele Alessandrelli
2020-07-15 10:44 ` Daniele Alessandrelli
2020-07-14 16:13 ` [PATCH v3 4/7] dt-bindings: power: Add Keem Bay power domains Daniele Alessandrelli
2020-07-14 16:13 ` Daniele Alessandrelli
2020-07-14 16:13 ` [PATCH v3 5/7] MAINTAINERS: Add maintainers for Keem Bay SoC Daniele Alessandrelli
2020-07-14 16:13 ` Daniele Alessandrelli
2020-07-14 16:13 ` [PATCH v3 6/7] arm64: dts: keembay: Add device tree " Daniele Alessandrelli
2020-07-14 16:13 ` Daniele Alessandrelli
2020-07-14 16:13 ` [PATCH v3 7/7] arm64: dts: keembay: Add device tree for Keem Bay EVM board Daniele Alessandrelli
2020-07-14 16:13 ` Daniele Alessandrelli
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.