* [PATCH 0/2] Qualcomm MSM8226 TLMM binding and driver
@ 2020-06-27 19:28 Bartosz Dudziak
2020-06-27 19:28 ` [PATCH 1/2] dt-bindings: pinctrl: qcom: Add msm8226 pinctrl bindings Bartosz Dudziak
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Bartosz Dudziak @ 2020-06-27 19:28 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Bartosz Dudziak, Andy Gross, Linus Walleij, linux-kernel,
linux-arm-msm, linux-gpio
Binding and driver for the Qualcomm MSM8226 TLMM pinctrl block
Bartosz Dudziak (2):
dt-bindings: pinctrl: qcom: Add msm8226 pinctrl bindings
pinctrl: qcom: Add msm8226 pinctrl driver.
.../pinctrl/qcom,msm8226-pinctrl.yaml | 123 ++++
drivers/pinctrl/qcom/Kconfig | 9 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-msm8226.c | 631 ++++++++++++++++++
4 files changed, 764 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
create mode 100644 drivers/pinctrl/qcom/pinctrl-msm8226.c
--
2.25.1
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/2] dt-bindings: pinctrl: qcom: Add msm8226 pinctrl bindings
2020-06-27 19:28 [PATCH 0/2] Qualcomm MSM8226 TLMM binding and driver Bartosz Dudziak
@ 2020-06-27 19:28 ` Bartosz Dudziak
2020-07-15 20:24 ` Rob Herring
2020-06-27 19:28 ` [PATCH 2/2] pinctrl: qcom: Add msm8226 pinctrl driver Bartosz Dudziak
2020-07-07 12:48 ` [PATCH 0/2] Qualcomm MSM8226 TLMM binding and driver Linus Walleij
2 siblings, 1 reply; 6+ messages in thread
From: Bartosz Dudziak @ 2020-06-27 19:28 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Bartosz Dudziak, Andy Gross, Linus Walleij, Rob Herring,
linux-arm-msm, linux-gpio, devicetree, linux-kernel
Add device tree binding Documentation details for Qualcomm msm8226
pinctrl driver.
- Bindings documentation was based on qcom,sm8250-pinctrl.yaml by
Bjorn Andersson <bjorn.andersson@linaro.org> and then modified for
msm8226 content
Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
---
.../pinctrl/qcom,msm8226-pinctrl.yaml | 123 ++++++++++++++++++
1 file changed, 123 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
new file mode 100644
index 0000000000..8d8dc15718
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,msm8226-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. MSM8226 TLMM block
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description: |
+ This binding describes the Top Level Mode Multiplexer block found in the
+ MSM8226 platform.
+
+properties:
+ compatible:
+ const: qcom,msm8226-pinctrl
+
+ reg:
+ description: Specifies the base address and size of the TLMM register space
+ maxItems: 1
+
+ interrupts:
+ description: Specifies the TLMM summary IRQ
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ description: Specifies the PIN numbers and Flags, as defined in
+ include/dt-bindings/interrupt-controller/irq.h
+ const: 2
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description: Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ gpio-reserved-ranges:
+ maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+ '^.*$':
+ if:
+ type: object
+ then:
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$"
+ - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins. Functions are only valid for gpio pins.
+
+ enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5,
+ blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1,
+ blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
+ blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ bias-pull-down: true
+
+ bias-pull-up: true
+
+ bias-disable: true
+
+ output-high: true
+
+ output-low: true
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ msmgpio: pinctrl@fd510000 {
+ compatible = "qcom,msm8226-pinctrl";
+ reg = <0xfd510000 0x4000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&msmgpio 0 0 117>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ };
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 2/2] pinctrl: qcom: Add msm8226 pinctrl driver.
2020-06-27 19:28 [PATCH 0/2] Qualcomm MSM8226 TLMM binding and driver Bartosz Dudziak
2020-06-27 19:28 ` [PATCH 1/2] dt-bindings: pinctrl: qcom: Add msm8226 pinctrl bindings Bartosz Dudziak
@ 2020-06-27 19:28 ` Bartosz Dudziak
2020-07-07 12:48 ` [PATCH 0/2] Qualcomm MSM8226 TLMM binding and driver Linus Walleij
2 siblings, 0 replies; 6+ messages in thread
From: Bartosz Dudziak @ 2020-06-27 19:28 UTC (permalink / raw)
To: Bjorn Andersson
Cc: Bartosz Dudziak, Andy Gross, Linus Walleij, linux-kernel,
linux-arm-msm, linux-gpio
Add initial Qualcomm msm8226 pinctrl driver to support pin configuration
with pinctrl framework for msm8226 SoC.
- Initial formatting and style was taken from the msm8x74 pinctrl driver
added by Björn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
---
drivers/pinctrl/qcom/Kconfig | 9 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-msm8226.c | 631 +++++++++++++++++++++++++
3 files changed, 641 insertions(+)
create mode 100644 drivers/pinctrl/qcom/pinctrl-msm8226.c
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index ff1ee159dc..97ddc535fc 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -60,6 +60,15 @@ config PINCTRL_IPQ6018
Qualcomm Technologies Inc. IPQ6018 platform. Select this for
IPQ6018.
+config PINCTRL_MSM8226
+ tristate "Qualcomm 8226 pin controller driver"
+ depends on GPIOLIB && OF
+ select PINCTRL_MSM
+ help
+ This is the pinctrl, pinmux, pinconf and gpiolib driver for the
+ Qualcomm Technologies Inc TLMM block found on the Qualcomm
+ Technologies Inc MSM8226 platform.
+
config PINCTRL_MSM8660
tristate "Qualcomm 8660 pin controller driver"
depends on GPIOLIB && OF
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index 061ec9fb65..9e3d9c91a4 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_PINCTRL_IPQ4019) += pinctrl-ipq4019.o
obj-$(CONFIG_PINCTRL_IPQ8064) += pinctrl-ipq8064.o
obj-$(CONFIG_PINCTRL_IPQ8074) += pinctrl-ipq8074.o
obj-$(CONFIG_PINCTRL_IPQ6018) += pinctrl-ipq6018.o
+obj-$(CONFIG_PINCTRL_MSM8226) += pinctrl-msm8226.o
obj-$(CONFIG_PINCTRL_MSM8660) += pinctrl-msm8660.o
obj-$(CONFIG_PINCTRL_MSM8960) += pinctrl-msm8960.o
obj-$(CONFIG_PINCTRL_MSM8X74) += pinctrl-msm8x74.o
diff --git a/drivers/pinctrl/qcom/pinctrl-msm8226.c b/drivers/pinctrl/qcom/pinctrl-msm8226.c
new file mode 100644
index 0000000000..82010703c3
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-msm8226.c
@@ -0,0 +1,631 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2020, The Linux Foundation. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-msm.h"
+
+static const struct pinctrl_pin_desc msm8226_pins[] = {
+ PINCTRL_PIN(0, "GPIO_0"),
+ PINCTRL_PIN(1, "GPIO_1"),
+ PINCTRL_PIN(2, "GPIO_2"),
+ PINCTRL_PIN(3, "GPIO_3"),
+ PINCTRL_PIN(4, "GPIO_4"),
+ PINCTRL_PIN(5, "GPIO_5"),
+ PINCTRL_PIN(6, "GPIO_6"),
+ PINCTRL_PIN(7, "GPIO_7"),
+ PINCTRL_PIN(8, "GPIO_8"),
+ PINCTRL_PIN(9, "GPIO_9"),
+ PINCTRL_PIN(10, "GPIO_10"),
+ PINCTRL_PIN(11, "GPIO_11"),
+ PINCTRL_PIN(12, "GPIO_12"),
+ PINCTRL_PIN(13, "GPIO_13"),
+ PINCTRL_PIN(14, "GPIO_14"),
+ PINCTRL_PIN(15, "GPIO_15"),
+ PINCTRL_PIN(16, "GPIO_16"),
+ PINCTRL_PIN(17, "GPIO_17"),
+ PINCTRL_PIN(18, "GPIO_18"),
+ PINCTRL_PIN(19, "GPIO_19"),
+ PINCTRL_PIN(20, "GPIO_20"),
+ PINCTRL_PIN(21, "GPIO_21"),
+ PINCTRL_PIN(22, "GPIO_22"),
+ PINCTRL_PIN(23, "GPIO_23"),
+ PINCTRL_PIN(24, "GPIO_24"),
+ PINCTRL_PIN(25, "GPIO_25"),
+ PINCTRL_PIN(26, "GPIO_26"),
+ PINCTRL_PIN(27, "GPIO_27"),
+ PINCTRL_PIN(28, "GPIO_28"),
+ PINCTRL_PIN(29, "GPIO_29"),
+ PINCTRL_PIN(30, "GPIO_30"),
+ PINCTRL_PIN(31, "GPIO_31"),
+ PINCTRL_PIN(32, "GPIO_32"),
+ PINCTRL_PIN(33, "GPIO_33"),
+ PINCTRL_PIN(34, "GPIO_34"),
+ PINCTRL_PIN(35, "GPIO_35"),
+ PINCTRL_PIN(36, "GPIO_36"),
+ PINCTRL_PIN(37, "GPIO_37"),
+ PINCTRL_PIN(38, "GPIO_38"),
+ PINCTRL_PIN(39, "GPIO_39"),
+ PINCTRL_PIN(40, "GPIO_40"),
+ PINCTRL_PIN(41, "GPIO_41"),
+ PINCTRL_PIN(42, "GPIO_42"),
+ PINCTRL_PIN(43, "GPIO_43"),
+ PINCTRL_PIN(44, "GPIO_44"),
+ PINCTRL_PIN(45, "GPIO_45"),
+ PINCTRL_PIN(46, "GPIO_46"),
+ PINCTRL_PIN(47, "GPIO_47"),
+ PINCTRL_PIN(48, "GPIO_48"),
+ PINCTRL_PIN(49, "GPIO_49"),
+ PINCTRL_PIN(50, "GPIO_50"),
+ PINCTRL_PIN(51, "GPIO_51"),
+ PINCTRL_PIN(52, "GPIO_52"),
+ PINCTRL_PIN(53, "GPIO_53"),
+ PINCTRL_PIN(54, "GPIO_54"),
+ PINCTRL_PIN(55, "GPIO_55"),
+ PINCTRL_PIN(56, "GPIO_56"),
+ PINCTRL_PIN(57, "GPIO_57"),
+ PINCTRL_PIN(58, "GPIO_58"),
+ PINCTRL_PIN(59, "GPIO_59"),
+ PINCTRL_PIN(60, "GPIO_60"),
+ PINCTRL_PIN(61, "GPIO_61"),
+ PINCTRL_PIN(62, "GPIO_62"),
+ PINCTRL_PIN(63, "GPIO_63"),
+ PINCTRL_PIN(64, "GPIO_64"),
+ PINCTRL_PIN(65, "GPIO_65"),
+ PINCTRL_PIN(66, "GPIO_66"),
+ PINCTRL_PIN(67, "GPIO_67"),
+ PINCTRL_PIN(68, "GPIO_68"),
+ PINCTRL_PIN(69, "GPIO_69"),
+ PINCTRL_PIN(70, "GPIO_70"),
+ PINCTRL_PIN(71, "GPIO_71"),
+ PINCTRL_PIN(72, "GPIO_72"),
+ PINCTRL_PIN(73, "GPIO_73"),
+ PINCTRL_PIN(74, "GPIO_74"),
+ PINCTRL_PIN(75, "GPIO_75"),
+ PINCTRL_PIN(76, "GPIO_76"),
+ PINCTRL_PIN(77, "GPIO_77"),
+ PINCTRL_PIN(78, "GPIO_78"),
+ PINCTRL_PIN(79, "GPIO_79"),
+ PINCTRL_PIN(80, "GPIO_80"),
+ PINCTRL_PIN(81, "GPIO_81"),
+ PINCTRL_PIN(82, "GPIO_82"),
+ PINCTRL_PIN(83, "GPIO_83"),
+ PINCTRL_PIN(84, "GPIO_84"),
+ PINCTRL_PIN(85, "GPIO_85"),
+ PINCTRL_PIN(86, "GPIO_86"),
+ PINCTRL_PIN(87, "GPIO_87"),
+ PINCTRL_PIN(88, "GPIO_88"),
+ PINCTRL_PIN(89, "GPIO_89"),
+ PINCTRL_PIN(90, "GPIO_90"),
+ PINCTRL_PIN(91, "GPIO_91"),
+ PINCTRL_PIN(92, "GPIO_92"),
+ PINCTRL_PIN(93, "GPIO_93"),
+ PINCTRL_PIN(94, "GPIO_94"),
+ PINCTRL_PIN(95, "GPIO_95"),
+ PINCTRL_PIN(96, "GPIO_96"),
+ PINCTRL_PIN(97, "GPIO_97"),
+ PINCTRL_PIN(98, "GPIO_98"),
+ PINCTRL_PIN(99, "GPIO_99"),
+ PINCTRL_PIN(100, "GPIO_100"),
+ PINCTRL_PIN(101, "GPIO_101"),
+ PINCTRL_PIN(102, "GPIO_102"),
+ PINCTRL_PIN(103, "GPIO_103"),
+ PINCTRL_PIN(104, "GPIO_104"),
+ PINCTRL_PIN(105, "GPIO_105"),
+ PINCTRL_PIN(106, "GPIO_106"),
+ PINCTRL_PIN(107, "GPIO_107"),
+ PINCTRL_PIN(108, "GPIO_108"),
+ PINCTRL_PIN(109, "GPIO_109"),
+ PINCTRL_PIN(110, "GPIO_110"),
+ PINCTRL_PIN(111, "GPIO_111"),
+ PINCTRL_PIN(112, "GPIO_112"),
+ PINCTRL_PIN(113, "GPIO_113"),
+ PINCTRL_PIN(114, "GPIO_114"),
+ PINCTRL_PIN(115, "GPIO_115"),
+ PINCTRL_PIN(116, "GPIO_116"),
+
+ PINCTRL_PIN(117, "SDC1_CLK"),
+ PINCTRL_PIN(118, "SDC1_CMD"),
+ PINCTRL_PIN(119, "SDC1_DATA"),
+ PINCTRL_PIN(120, "SDC2_CLK"),
+ PINCTRL_PIN(121, "SDC2_CMD"),
+ PINCTRL_PIN(122, "SDC2_DATA"),
+};
+
+#define DECLARE_MSM_GPIO_PINS(pin) static const unsigned int gpio##pin##_pins[] = { pin }
+DECLARE_MSM_GPIO_PINS(0);
+DECLARE_MSM_GPIO_PINS(1);
+DECLARE_MSM_GPIO_PINS(2);
+DECLARE_MSM_GPIO_PINS(3);
+DECLARE_MSM_GPIO_PINS(4);
+DECLARE_MSM_GPIO_PINS(5);
+DECLARE_MSM_GPIO_PINS(6);
+DECLARE_MSM_GPIO_PINS(7);
+DECLARE_MSM_GPIO_PINS(8);
+DECLARE_MSM_GPIO_PINS(9);
+DECLARE_MSM_GPIO_PINS(10);
+DECLARE_MSM_GPIO_PINS(11);
+DECLARE_MSM_GPIO_PINS(12);
+DECLARE_MSM_GPIO_PINS(13);
+DECLARE_MSM_GPIO_PINS(14);
+DECLARE_MSM_GPIO_PINS(15);
+DECLARE_MSM_GPIO_PINS(16);
+DECLARE_MSM_GPIO_PINS(17);
+DECLARE_MSM_GPIO_PINS(18);
+DECLARE_MSM_GPIO_PINS(19);
+DECLARE_MSM_GPIO_PINS(20);
+DECLARE_MSM_GPIO_PINS(21);
+DECLARE_MSM_GPIO_PINS(22);
+DECLARE_MSM_GPIO_PINS(23);
+DECLARE_MSM_GPIO_PINS(24);
+DECLARE_MSM_GPIO_PINS(25);
+DECLARE_MSM_GPIO_PINS(26);
+DECLARE_MSM_GPIO_PINS(27);
+DECLARE_MSM_GPIO_PINS(28);
+DECLARE_MSM_GPIO_PINS(29);
+DECLARE_MSM_GPIO_PINS(30);
+DECLARE_MSM_GPIO_PINS(31);
+DECLARE_MSM_GPIO_PINS(32);
+DECLARE_MSM_GPIO_PINS(33);
+DECLARE_MSM_GPIO_PINS(34);
+DECLARE_MSM_GPIO_PINS(35);
+DECLARE_MSM_GPIO_PINS(36);
+DECLARE_MSM_GPIO_PINS(37);
+DECLARE_MSM_GPIO_PINS(38);
+DECLARE_MSM_GPIO_PINS(39);
+DECLARE_MSM_GPIO_PINS(40);
+DECLARE_MSM_GPIO_PINS(41);
+DECLARE_MSM_GPIO_PINS(42);
+DECLARE_MSM_GPIO_PINS(43);
+DECLARE_MSM_GPIO_PINS(44);
+DECLARE_MSM_GPIO_PINS(45);
+DECLARE_MSM_GPIO_PINS(46);
+DECLARE_MSM_GPIO_PINS(47);
+DECLARE_MSM_GPIO_PINS(48);
+DECLARE_MSM_GPIO_PINS(49);
+DECLARE_MSM_GPIO_PINS(50);
+DECLARE_MSM_GPIO_PINS(51);
+DECLARE_MSM_GPIO_PINS(52);
+DECLARE_MSM_GPIO_PINS(53);
+DECLARE_MSM_GPIO_PINS(54);
+DECLARE_MSM_GPIO_PINS(55);
+DECLARE_MSM_GPIO_PINS(56);
+DECLARE_MSM_GPIO_PINS(57);
+DECLARE_MSM_GPIO_PINS(58);
+DECLARE_MSM_GPIO_PINS(59);
+DECLARE_MSM_GPIO_PINS(60);
+DECLARE_MSM_GPIO_PINS(61);
+DECLARE_MSM_GPIO_PINS(62);
+DECLARE_MSM_GPIO_PINS(63);
+DECLARE_MSM_GPIO_PINS(64);
+DECLARE_MSM_GPIO_PINS(65);
+DECLARE_MSM_GPIO_PINS(66);
+DECLARE_MSM_GPIO_PINS(67);
+DECLARE_MSM_GPIO_PINS(68);
+DECLARE_MSM_GPIO_PINS(69);
+DECLARE_MSM_GPIO_PINS(70);
+DECLARE_MSM_GPIO_PINS(71);
+DECLARE_MSM_GPIO_PINS(72);
+DECLARE_MSM_GPIO_PINS(73);
+DECLARE_MSM_GPIO_PINS(74);
+DECLARE_MSM_GPIO_PINS(75);
+DECLARE_MSM_GPIO_PINS(76);
+DECLARE_MSM_GPIO_PINS(77);
+DECLARE_MSM_GPIO_PINS(78);
+DECLARE_MSM_GPIO_PINS(79);
+DECLARE_MSM_GPIO_PINS(80);
+DECLARE_MSM_GPIO_PINS(81);
+DECLARE_MSM_GPIO_PINS(82);
+DECLARE_MSM_GPIO_PINS(83);
+DECLARE_MSM_GPIO_PINS(84);
+DECLARE_MSM_GPIO_PINS(85);
+DECLARE_MSM_GPIO_PINS(86);
+DECLARE_MSM_GPIO_PINS(87);
+DECLARE_MSM_GPIO_PINS(88);
+DECLARE_MSM_GPIO_PINS(89);
+DECLARE_MSM_GPIO_PINS(90);
+DECLARE_MSM_GPIO_PINS(91);
+DECLARE_MSM_GPIO_PINS(92);
+DECLARE_MSM_GPIO_PINS(93);
+DECLARE_MSM_GPIO_PINS(94);
+DECLARE_MSM_GPIO_PINS(95);
+DECLARE_MSM_GPIO_PINS(96);
+DECLARE_MSM_GPIO_PINS(97);
+DECLARE_MSM_GPIO_PINS(98);
+DECLARE_MSM_GPIO_PINS(99);
+DECLARE_MSM_GPIO_PINS(100);
+DECLARE_MSM_GPIO_PINS(101);
+DECLARE_MSM_GPIO_PINS(102);
+DECLARE_MSM_GPIO_PINS(103);
+DECLARE_MSM_GPIO_PINS(104);
+DECLARE_MSM_GPIO_PINS(105);
+DECLARE_MSM_GPIO_PINS(106);
+DECLARE_MSM_GPIO_PINS(107);
+DECLARE_MSM_GPIO_PINS(108);
+DECLARE_MSM_GPIO_PINS(109);
+DECLARE_MSM_GPIO_PINS(110);
+DECLARE_MSM_GPIO_PINS(111);
+DECLARE_MSM_GPIO_PINS(112);
+DECLARE_MSM_GPIO_PINS(113);
+DECLARE_MSM_GPIO_PINS(114);
+DECLARE_MSM_GPIO_PINS(115);
+DECLARE_MSM_GPIO_PINS(116);
+
+static const unsigned int sdc1_clk_pins[] = { 117 };
+static const unsigned int sdc1_cmd_pins[] = { 118 };
+static const unsigned int sdc1_data_pins[] = { 119 };
+static const unsigned int sdc2_clk_pins[] = { 120 };
+static const unsigned int sdc2_cmd_pins[] = { 121 };
+static const unsigned int sdc2_data_pins[] = { 122 };
+
+#define FUNCTION(fname) \
+ [MSM_MUX_##fname] = { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7) \
+ { \
+ .name = "gpio" #id, \
+ .pins = gpio##id##_pins, \
+ .npins = ARRAY_SIZE(gpio##id##_pins), \
+ .funcs = (int[]){ \
+ MSM_MUX_gpio, \
+ MSM_MUX_##f1, \
+ MSM_MUX_##f2, \
+ MSM_MUX_##f3, \
+ MSM_MUX_##f4, \
+ MSM_MUX_##f5, \
+ MSM_MUX_##f6, \
+ MSM_MUX_##f7 \
+ }, \
+ .nfuncs = 8, \
+ .ctl_reg = 0x1000 + 0x10 * id, \
+ .io_reg = 0x1004 + 0x10 * id, \
+ .intr_cfg_reg = 0x1008 + 0x10 * id, \
+ .intr_status_reg = 0x100c + 0x10 * id, \
+ .intr_target_reg = 0x1008 + 0x10 * id, \
+ .mux_bit = 2, \
+ .pull_bit = 0, \
+ .drv_bit = 6, \
+ .oe_bit = 9, \
+ .in_bit = 0, \
+ .out_bit = 1, \
+ .intr_enable_bit = 0, \
+ .intr_status_bit = 0, \
+ .intr_target_bit = 5, \
+ .intr_target_kpss_val = 4, \
+ .intr_raw_status_bit = 4, \
+ .intr_polarity_bit = 1, \
+ .intr_detection_bit = 2, \
+ .intr_detection_width = 2, \
+ }
+
+#define SDC_PINGROUP(pg_name, ctl, pull, drv) \
+ { \
+ .name = #pg_name, \
+ .pins = pg_name##_pins, \
+ .npins = ARRAY_SIZE(pg_name##_pins), \
+ .ctl_reg = ctl, \
+ .io_reg = 0, \
+ .intr_cfg_reg = 0, \
+ .intr_status_reg = 0, \
+ .intr_target_reg = 0, \
+ .mux_bit = -1, \
+ .pull_bit = pull, \
+ .drv_bit = drv, \
+ .oe_bit = -1, \
+ .in_bit = -1, \
+ .out_bit = -1, \
+ .intr_enable_bit = -1, \
+ .intr_status_bit = -1, \
+ .intr_target_bit = -1, \
+ .intr_target_kpss_val = -1, \
+ .intr_raw_status_bit = -1, \
+ .intr_polarity_bit = -1, \
+ .intr_detection_bit = -1, \
+ .intr_detection_width = -1, \
+ }
+
+/*
+ * TODO: Add the rest of the possible functions and fill out
+ * the pingroup table below.
+ */
+enum msm8226_functions {
+ MSM_MUX_gpio,
+ MSM_MUX_cci_i2c0,
+ MSM_MUX_blsp_i2c1,
+ MSM_MUX_blsp_i2c2,
+ MSM_MUX_blsp_i2c3,
+ MSM_MUX_blsp_i2c5,
+ MSM_MUX_blsp_spi1,
+ MSM_MUX_blsp_spi2,
+ MSM_MUX_blsp_spi3,
+ MSM_MUX_blsp_spi5,
+ MSM_MUX_blsp_uart1,
+ MSM_MUX_blsp_uart2,
+ MSM_MUX_blsp_uart3,
+ MSM_MUX_blsp_uart5,
+ MSM_MUX_blsp_uim1,
+ MSM_MUX_blsp_uim2,
+ MSM_MUX_blsp_uim3,
+ MSM_MUX_blsp_uim5,
+ MSM_MUX_cam_mclk0,
+ MSM_MUX_cam_mclk1,
+ MSM_MUX_wlan,
+ MSM_MUX_NA,
+};
+
+static const char * const gpio_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+ "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
+ "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
+ "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
+ "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+ "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
+ "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
+ "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
+ "gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
+ "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
+ "gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91",
+ "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98",
+ "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104",
+ "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110",
+ "gpio111", "gpio112", "gpio113", "gpio114", "gpio115", "gpio116",
+};
+
+static const char * const blsp_uart1_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3"
+};
+
+static const char * const blsp_uim1_groups[] = { "gpio0", "gpio1" };
+static const char * const blsp_i2c1_groups[] = { "gpio2", "gpio3" };
+static const char * const blsp_spi1_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3"
+};
+
+static const char * const blsp_uart2_groups[] = {
+ "gpio4", "gpio5", "gpio6", "gpio7"
+};
+
+static const char * const blsp_uim2_groups[] = { "gpio4", "gpio5" };
+static const char * const blsp_i2c2_groups[] = { "gpio6", "gpio7" };
+static const char * const blsp_spi2_groups[] = {
+ "gpio4", "gpio5", "gpio6", "gpio7"
+};
+
+static const char * const blsp_uart3_groups[] = {
+ "gpio8", "gpio9", "gpio10", "gpio11"
+};
+
+static const char * const blsp_uim3_groups[] = { "gpio8", "gpio9" };
+static const char * const blsp_i2c3_groups[] = { "gpio10", "gpio11" };
+static const char * const blsp_spi3_groups[] = {
+ "gpio8", "gpio9", "gpio10", "gpio11"
+};
+
+static const char * const blsp_uart5_groups[] = {
+ "gpio16", "gpio17", "gpio18", "gpio19"
+};
+
+static const char * const blsp_uim5_groups[] = { "gpio16", "gpio17" };
+static const char * const blsp_i2c5_groups[] = { "gpio18", "gpio19" };
+static const char * const blsp_spi5_groups[] = {
+ "gpio16", "gpio17", "gpio18", "gpio19"
+};
+
+static const char * const cci_i2c0_groups[] = { "gpio29", "gpio30" };
+
+static const char * const cam_mclk0_groups[] = { "gpio26" };
+static const char * const cam_mclk1_groups[] = { "gpio27" };
+
+static const char * const wlan_groups[] = {
+ "gpio40", "gpio41", "gpio42", "gpio43", "gpio44"
+};
+
+static const struct msm_function msm8226_functions[] = {
+ FUNCTION(gpio),
+ FUNCTION(cci_i2c0),
+ FUNCTION(blsp_uim1),
+ FUNCTION(blsp_uim2),
+ FUNCTION(blsp_uim3),
+ FUNCTION(blsp_uim5),
+ FUNCTION(blsp_i2c1),
+ FUNCTION(blsp_i2c2),
+ FUNCTION(blsp_i2c3),
+ FUNCTION(blsp_i2c5),
+ FUNCTION(blsp_spi1),
+ FUNCTION(blsp_spi2),
+ FUNCTION(blsp_spi3),
+ FUNCTION(blsp_spi5),
+ FUNCTION(blsp_uart1),
+ FUNCTION(blsp_uart2),
+ FUNCTION(blsp_uart3),
+ FUNCTION(blsp_uart5),
+ FUNCTION(cam_mclk0),
+ FUNCTION(cam_mclk1),
+ FUNCTION(wlan),
+};
+
+static const struct msm_pingroup msm8226_groups[] = {
+ PINGROUP(0, blsp_spi1, blsp_uart1, blsp_uim1, NA, NA, NA, NA),
+ PINGROUP(1, blsp_spi1, blsp_uart1, blsp_uim1, NA, NA, NA, NA),
+ PINGROUP(2, blsp_spi1, blsp_uart1, blsp_i2c1, NA, NA, NA, NA),
+ PINGROUP(3, blsp_spi1, blsp_uart1, blsp_i2c1, NA, NA, NA, NA),
+ PINGROUP(4, blsp_spi2, blsp_uart2, blsp_uim2, NA, NA, NA, NA),
+ PINGROUP(5, blsp_spi2, blsp_uart2, blsp_uim2, NA, NA, NA, NA),
+ PINGROUP(6, blsp_spi2, blsp_uart2, blsp_i2c2, NA, NA, NA, NA),
+ PINGROUP(7, blsp_spi2, blsp_uart2, blsp_i2c2, NA, NA, NA, NA),
+ PINGROUP(8, blsp_spi3, blsp_uart3, blsp_uim3, NA, NA, NA, NA),
+ PINGROUP(9, blsp_spi3, blsp_uart3, blsp_uim3, NA, NA, NA, NA),
+ PINGROUP(10, blsp_spi3, blsp_uart3, blsp_i2c3, NA, NA, NA, NA),
+ PINGROUP(11, blsp_spi3, blsp_uart3, blsp_i2c3, NA, NA, NA, NA),
+ PINGROUP(12, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(13, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(14, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(15, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(16, blsp_spi5, blsp_uart5, blsp_uim5, NA, NA, NA, NA),
+ PINGROUP(17, blsp_spi5, blsp_uart5, blsp_uim5, NA, NA, NA, NA),
+ PINGROUP(18, blsp_spi5, blsp_uart5, blsp_i2c5, NA, NA, NA, NA),
+ PINGROUP(19, blsp_spi5, blsp_uart5, blsp_i2c5, NA, NA, NA, NA),
+ PINGROUP(20, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(21, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(22, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(23, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(24, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(25, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(26, cam_mclk0, NA, NA, NA, NA, NA, NA),
+ PINGROUP(27, cam_mclk1, NA, NA, NA, NA, NA, NA),
+ PINGROUP(28, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(29, cci_i2c0, NA, NA, NA, NA, NA, NA),
+ PINGROUP(30, cci_i2c0, NA, NA, NA, NA, NA, NA),
+ PINGROUP(31, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(32, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(33, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(34, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(35, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(36, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(37, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(38, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(39, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(40, wlan, NA, NA, NA, NA, NA, NA),
+ PINGROUP(41, wlan, NA, NA, NA, NA, NA, NA),
+ PINGROUP(42, wlan, NA, NA, NA, NA, NA, NA),
+ PINGROUP(43, wlan, NA, NA, NA, NA, NA, NA),
+ PINGROUP(44, wlan, NA, NA, NA, NA, NA, NA),
+ PINGROUP(45, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(46, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(47, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(48, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(49, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(50, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(51, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(52, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(53, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(54, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(55, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(56, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(57, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(58, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(59, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(60, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(61, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(62, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(63, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(64, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(65, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(66, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(67, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(68, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(69, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(70, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(71, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(72, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(73, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(74, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(75, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(76, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(77, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(78, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(79, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(80, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(81, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(82, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(83, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(84, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(85, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(86, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(87, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(88, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(89, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(90, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(91, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(92, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(93, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(94, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(95, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(96, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(97, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(98, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(99, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(100, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(101, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(102, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(103, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(104, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(105, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(106, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(107, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(108, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(109, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(110, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(111, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(112, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(113, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(114, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(115, NA, NA, NA, NA, NA, NA, NA),
+ PINGROUP(116, NA, NA, NA, NA, NA, NA, NA),
+ SDC_PINGROUP(sdc1_clk, 0x2044, 13, 6),
+ SDC_PINGROUP(sdc1_cmd, 0x2044, 11, 3),
+ SDC_PINGROUP(sdc1_data, 0x2044, 9, 0),
+ SDC_PINGROUP(sdc2_clk, 0x2048, 14, 6),
+ SDC_PINGROUP(sdc2_cmd, 0x2048, 11, 3),
+ SDC_PINGROUP(sdc2_data, 0x2048, 9, 0),
+};
+
+#define NUM_GPIO_PINGROUPS 117
+
+static const struct msm_pinctrl_soc_data msm8226_pinctrl = {
+ .pins = msm8226_pins,
+ .npins = ARRAY_SIZE(msm8226_pins),
+ .functions = msm8226_functions,
+ .nfunctions = ARRAY_SIZE(msm8226_functions),
+ .groups = msm8226_groups,
+ .ngroups = ARRAY_SIZE(msm8226_groups),
+ .ngpios = NUM_GPIO_PINGROUPS,
+};
+
+static int msm8226_pinctrl_probe(struct platform_device *pdev)
+{
+ return msm_pinctrl_probe(pdev, &msm8226_pinctrl);
+}
+
+static const struct of_device_id msm8226_pinctrl_of_match[] = {
+ { .compatible = "qcom,msm8226-pinctrl", },
+ { },
+};
+
+static struct platform_driver msm8226_pinctrl_driver = {
+ .driver = {
+ .name = "msm8226-pinctrl",
+ .of_match_table = msm8226_pinctrl_of_match,
+ },
+ .probe = msm8226_pinctrl_probe,
+ .remove = msm_pinctrl_remove,
+};
+
+static int __init msm8226_pinctrl_init(void)
+{
+ return platform_driver_register(&msm8226_pinctrl_driver);
+}
+arch_initcall(msm8226_pinctrl_init);
+
+static void __exit msm8226_pinctrl_exit(void)
+{
+ platform_driver_unregister(&msm8226_pinctrl_driver);
+}
+module_exit(msm8226_pinctrl_exit);
+
+MODULE_AUTHOR("Bartosz Dudziak <bartosz.dudziak@snejp.pl>");
+MODULE_DESCRIPTION("Qualcomm MSM8226 pinctrl driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(of, msm8226_pinctrl_of_match);
+
--
2.25.1
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 0/2] Qualcomm MSM8226 TLMM binding and driver
2020-06-27 19:28 [PATCH 0/2] Qualcomm MSM8226 TLMM binding and driver Bartosz Dudziak
2020-06-27 19:28 ` [PATCH 1/2] dt-bindings: pinctrl: qcom: Add msm8226 pinctrl bindings Bartosz Dudziak
2020-06-27 19:28 ` [PATCH 2/2] pinctrl: qcom: Add msm8226 pinctrl driver Bartosz Dudziak
@ 2020-07-07 12:48 ` Linus Walleij
2 siblings, 0 replies; 6+ messages in thread
From: Linus Walleij @ 2020-07-07 12:48 UTC (permalink / raw)
To: Bartosz Dudziak, Bjorn Andersson
Cc: Andy Gross, linux-kernel, MSM, open list:GPIO SUBSYSTEM
On Sat, Jun 27, 2020 at 9:34 PM Bartosz Dudziak
<bartosz.dudziak@snejp.pl> wrote:
> Binding and driver for the Qualcomm MSM8226 TLMM pinctrl block
This looks good to me, but I'm waiting for Bjorn to review it before applying.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] dt-bindings: pinctrl: qcom: Add msm8226 pinctrl bindings
2020-06-27 19:28 ` [PATCH 1/2] dt-bindings: pinctrl: qcom: Add msm8226 pinctrl bindings Bartosz Dudziak
@ 2020-07-15 20:24 ` Rob Herring
2020-07-16 21:29 ` Bartosz Dudziak
0 siblings, 1 reply; 6+ messages in thread
From: Rob Herring @ 2020-07-15 20:24 UTC (permalink / raw)
To: Bartosz Dudziak
Cc: Bjorn Andersson, Andy Gross, Linus Walleij, linux-arm-msm,
linux-gpio, devicetree, linux-kernel
On Sat, Jun 27, 2020 at 09:28:30PM +0200, Bartosz Dudziak wrote:
> Add device tree binding Documentation details for Qualcomm msm8226
> pinctrl driver.
>
> - Bindings documentation was based on qcom,sm8250-pinctrl.yaml by
> Bjorn Andersson <bjorn.andersson@linaro.org> and then modified for
> msm8226 content
>
> Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
> ---
> .../pinctrl/qcom,msm8226-pinctrl.yaml | 123 ++++++++++++++++++
> 1 file changed, 123 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
> new file mode 100644
> index 0000000000..8d8dc15718
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
> @@ -0,0 +1,123 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8226-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. MSM8226 TLMM block
> +
> +maintainers:
> + - Bjorn Andersson <bjorn.andersson@linaro.org>
> +
> +description: |
> + This binding describes the Top Level Mode Multiplexer block found in the
> + MSM8226 platform.
> +
> +properties:
> + compatible:
> + const: qcom,msm8226-pinctrl
> +
> + reg:
> + description: Specifies the base address and size of the TLMM register space
> + maxItems: 1
> +
> + interrupts:
> + description: Specifies the TLMM summary IRQ
> + maxItems: 1
> +
> + interrupt-controller: true
> +
> + '#interrupt-cells':
> + description: Specifies the PIN numbers and Flags, as defined in
> + include/dt-bindings/interrupt-controller/irq.h
> + const: 2
> +
> + gpio-controller: true
> +
> + '#gpio-cells':
> + description: Specifying the pin number and flags, as defined in
> + include/dt-bindings/gpio/gpio.h
> + const: 2
> +
> + gpio-ranges:
> + maxItems: 1
> +
> + gpio-reserved-ranges:
> + maxItems: 1
> +
> +#PIN CONFIGURATION NODES
> +patternProperties:
> + '^.*$':
> + if:
> + type: object
For new bindings, do '-pins$' for the node name pattern so we don't have
to do this hack.
> + then:
> + properties:
> + pins:
> + description:
> + List of gpio pins affected by the properties specified in this
> + subnode.
> + items:
> + oneOf:
> + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-6])$"
> + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ]
> + minItems: 1
> + maxItems: 36
> +
> + function:
> + description:
> + Specify the alternative function to be configured for the specified
> + pins. Functions are only valid for gpio pins.
> +
> + enum: [ gpio, cci_i2c0, blsp_uim1, blsp_uim2, blsp_uim3, blsp_uim5,
> + blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c5, blsp_spi1,
> + blsp_spi2, blsp_spi3, blsp_spi5, blsp_uart1, blsp_uart2,
> + blsp_uart3, blsp_uart5, cam_mclk0, cam_mclk1, wlan ]
> +
> + drive-strength:
> + enum: [2, 4, 6, 8, 10, 12, 14, 16]
> + default: 2
> + description:
> + Selects the drive strength for the specified pins, in mA.
> +
> + bias-pull-down: true
> +
> + bias-pull-up: true
> +
> + bias-disable: true
> +
> + output-high: true
> +
> + output-low: true
> +
> + required:
> + - pins
> + - function
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - interrupt-controller
> + - '#interrupt-cells'
> + - gpio-controller
> + - '#gpio-cells'
> + - gpio-ranges
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + msmgpio: pinctrl@fd510000 {
> + compatible = "qcom,msm8226-pinctrl";
> + reg = <0xfd510000 0x4000>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&msmgpio 0 0 117>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + };
> --
> 2.25.1
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 1/2] dt-bindings: pinctrl: qcom: Add msm8226 pinctrl bindings
2020-07-15 20:24 ` Rob Herring
@ 2020-07-16 21:29 ` Bartosz Dudziak
0 siblings, 0 replies; 6+ messages in thread
From: Bartosz Dudziak @ 2020-07-16 21:29 UTC (permalink / raw)
To: Rob Herring
Cc: Bjorn Andersson, Andy Gross, Linus Walleij, linux-arm-msm,
linux-gpio, devicetree, linux-kernel
On Wed, Jul 15, 2020 at 02:24:13PM -0600, Rob Herring wrote:
> On Sat, Jun 27, 2020 at 09:28:30PM +0200, Bartosz Dudziak wrote:
> > Add device tree binding Documentation details for Qualcomm msm8226
> > pinctrl driver.
> >
> > - Bindings documentation was based on qcom,sm8250-pinctrl.yaml by
> > Bjorn Andersson <bjorn.andersson@linaro.org> and then modified for
> > msm8226 content
> >
> > Signed-off-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
> > ---
> > .../pinctrl/qcom,msm8226-pinctrl.yaml | 123 ++++++++++++++++++
> > 1 file changed, 123 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
> > new file mode 100644
> > index 0000000000..8d8dc15718
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8226-pinctrl.yaml
> > @@ -0,0 +1,123 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8226-pinctrl.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm Technologies, Inc. MSM8226 TLMM block
> > +
> > +maintainers:
> > + - Bjorn Andersson <bjorn.andersson@linaro.org>
> > +
> > +description: |
> > + This binding describes the Top Level Mode Multiplexer block found in the
> > + MSM8226 platform.
> > +
> > +properties:
> > + compatible:
> > + const: qcom,msm8226-pinctrl
> > +
> > + reg:
> > + description: Specifies the base address and size of the TLMM register space
> > + maxItems: 1
> > +
> > + interrupts:
> > + description: Specifies the TLMM summary IRQ
> > + maxItems: 1
> > +
> > + interrupt-controller: true
> > +
> > + '#interrupt-cells':
> > + description: Specifies the PIN numbers and Flags, as defined in
> > + include/dt-bindings/interrupt-controller/irq.h
> > + const: 2
> > +
> > + gpio-controller: true
> > +
> > + '#gpio-cells':
> > + description: Specifying the pin number and flags, as defined in
> > + include/dt-bindings/gpio/gpio.h
> > + const: 2
> > +
> > + gpio-ranges:
> > + maxItems: 1
> > +
> > + gpio-reserved-ranges:
> > + maxItems: 1
> > +
> > +#PIN CONFIGURATION NODES
> > +patternProperties:
> > + '^.*$':
> > + if:
> > + type: object
>
> For new bindings, do '-pins$' for the node name pattern so we don't have
> to do this hack.
>
I have changed the name pattern and sent a v2 patch.
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-07-16 21:29 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-27 19:28 [PATCH 0/2] Qualcomm MSM8226 TLMM binding and driver Bartosz Dudziak
2020-06-27 19:28 ` [PATCH 1/2] dt-bindings: pinctrl: qcom: Add msm8226 pinctrl bindings Bartosz Dudziak
2020-07-15 20:24 ` Rob Herring
2020-07-16 21:29 ` Bartosz Dudziak
2020-06-27 19:28 ` [PATCH 2/2] pinctrl: qcom: Add msm8226 pinctrl driver Bartosz Dudziak
2020-07-07 12:48 ` [PATCH 0/2] Qualcomm MSM8226 TLMM binding and driver Linus Walleij
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.