* [PATCH 1/2] misc: hpilo: switch from 'pci_' to 'dma_' API
@ 2020-07-18 7:02 ` Christophe JAILLET
0 siblings, 0 replies; 8+ messages in thread
From: Christophe JAILLET @ 2020-07-18 7:02 UTC (permalink / raw)
To: arnd, gregkh; +Cc: linux-kernel, kernel-janitors, Christophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.
When memory is allocated in 'ilo_ccb_setup()' GFP_ATOMIC must be used
because a spin_lock is hold in 'ilo_open()' before calling
'ilo_ccb_setup()'
@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
@@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
If needed, see post from Christoph Hellwig on the kernel-janitors ML:
https://marc.info/?l=kernel-janitors&m=158745678307186&w=4
---
drivers/misc/hpilo.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
index 10c975662f8b..c9539c89a925 100644
--- a/drivers/misc/hpilo.c
+++ b/drivers/misc/hpilo.c
@@ -256,7 +256,8 @@ static void ilo_ccb_close(struct pci_dev *pdev, struct ccb_data *data)
memset_io(device_ccb, 0, sizeof(struct ccb));
/* free resources used to back send/recv queues */
- pci_free_consistent(pdev, data->dma_size, data->dma_va, data->dma_pa);
+ dma_free_coherent(&pdev->dev, data->dma_size, data->dma_va,
+ data->dma_pa);
}
static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
@@ -272,8 +273,8 @@ static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
2 * desc_mem_sz(NR_QENTRY) +
ILO_START_ALIGN + ILO_CACHE_SZ;
- data->dma_va = pci_alloc_consistent(hw->ilo_dev, data->dma_size,
- &data->dma_pa);
+ data->dma_va = dma_alloc_coherent(&hw->ilo_dev->dev, data->dma_size,
+ &data->dma_pa, GFP_ATOMIC);
if (!data->dma_va)
return -ENOMEM;
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* [PATCH 1/2] misc: hpilo: switch from 'pci_' to 'dma_' API
@ 2020-07-18 7:02 ` Christophe JAILLET
0 siblings, 0 replies; 8+ messages in thread
From: Christophe JAILLET @ 2020-07-18 7:02 UTC (permalink / raw)
To: arnd, gregkh; +Cc: linux-kernel, kernel-janitors, Christophe JAILLET
The wrappers in include/linux/pci-dma-compat.h should go away.
The patch has been generated with the coccinelle script below and has been
hand modified to replace GFP_ with a correct flag.
It has been compile tested.
When memory is allocated in 'ilo_ccb_setup()' GFP_ATOMIC must be used
because a spin_lock is hold in 'ilo_open()' before calling
'ilo_ccb_setup()'
@@
@@
- PCI_DMA_BIDIRECTIONAL
+ DMA_BIDIRECTIONAL
@@
@@
- PCI_DMA_TODEVICE
+ DMA_TO_DEVICE
@@
@@
- PCI_DMA_FROMDEVICE
+ DMA_FROM_DEVICE
@@
@@
- PCI_DMA_NONE
+ DMA_NONE
@@
expression e1, e2, e3;
@@
- pci_alloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3;
@@
- pci_zalloc_consistent(e1, e2, e3)
+ dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
@@
expression e1, e2, e3, e4;
@@
- pci_free_consistent(e1, e2, e3, e4)
+ dma_free_coherent(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_single(e1, e2, e3, e4)
+ dma_map_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_single(e1, e2, e3, e4)
+ dma_unmap_single(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4, e5;
@@
- pci_map_page(e1, e2, e3, e4, e5)
+ dma_map_page(&e1->dev, e2, e3, e4, e5)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_page(e1, e2, e3, e4)
+ dma_unmap_page(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_map_sg(e1, e2, e3, e4)
+ dma_map_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_unmap_sg(e1, e2, e3, e4)
+ dma_unmap_sg(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+ dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_single_for_device(e1, e2, e3, e4)
+ dma_sync_single_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+ dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
@@
expression e1, e2, e3, e4;
@@
- pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+ dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
@@
expression e1, e2;
@@
- pci_dma_mapping_error(e1, e2)
+ dma_mapping_error(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_dma_mask(e1, e2)
+ dma_set_mask(&e1->dev, e2)
@@
expression e1, e2;
@@
- pci_set_consistent_dma_mask(e1, e2)
+ dma_set_coherent_mask(&e1->dev, e2)
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
---
If needed, see post from Christoph Hellwig on the kernel-janitors ML:
https://marc.info/?l=kernel-janitors&m\x158745678307186&w=4
---
drivers/misc/hpilo.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
index 10c975662f8b..c9539c89a925 100644
--- a/drivers/misc/hpilo.c
+++ b/drivers/misc/hpilo.c
@@ -256,7 +256,8 @@ static void ilo_ccb_close(struct pci_dev *pdev, struct ccb_data *data)
memset_io(device_ccb, 0, sizeof(struct ccb));
/* free resources used to back send/recv queues */
- pci_free_consistent(pdev, data->dma_size, data->dma_va, data->dma_pa);
+ dma_free_coherent(&pdev->dev, data->dma_size, data->dma_va,
+ data->dma_pa);
}
static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
@@ -272,8 +273,8 @@ static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
2 * desc_mem_sz(NR_QENTRY) +
ILO_START_ALIGN + ILO_CACHE_SZ;
- data->dma_va = pci_alloc_consistent(hw->ilo_dev, data->dma_size,
- &data->dma_pa);
+ data->dma_va = dma_alloc_coherent(&hw->ilo_dev->dev, data->dma_size,
+ &data->dma_pa, GFP_ATOMIC);
if (!data->dma_va)
return -ENOMEM;
--
2.25.1
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] misc: hpilo: switch from 'pci_' to 'dma_' API
2020-07-18 7:02 ` Christophe JAILLET
@ 2020-07-23 7:34 ` Greg KH
-1 siblings, 0 replies; 8+ messages in thread
From: Greg KH @ 2020-07-23 7:34 UTC (permalink / raw)
To: Christophe JAILLET; +Cc: arnd, linux-kernel, kernel-janitors
On Sat, Jul 18, 2020 at 09:02:24AM +0200, Christophe JAILLET wrote:
> The wrappers in include/linux/pci-dma-compat.h should go away.
>
> The patch has been generated with the coccinelle script below and has been
> hand modified to replace GFP_ with a correct flag.
> It has been compile tested.
>
> When memory is allocated in 'ilo_ccb_setup()' GFP_ATOMIC must be used
> because a spin_lock is hold in 'ilo_open()' before calling
> 'ilo_ccb_setup()'
>
> @@
> @@
> - PCI_DMA_BIDIRECTIONAL
> + DMA_BIDIRECTIONAL
>
> @@
> @@
> - PCI_DMA_TODEVICE
> + DMA_TO_DEVICE
>
> @@
> @@
> - PCI_DMA_FROMDEVICE
> + DMA_FROM_DEVICE
>
> @@
> @@
> - PCI_DMA_NONE
> + DMA_NONE
>
> @@
> expression e1, e2, e3;
> @@
> - pci_alloc_consistent(e1, e2, e3)
> + dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
>
> @@
> expression e1, e2, e3;
> @@
> - pci_zalloc_consistent(e1, e2, e3)
> + dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_free_consistent(e1, e2, e3, e4)
> + dma_free_coherent(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_map_single(e1, e2, e3, e4)
> + dma_map_single(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_unmap_single(e1, e2, e3, e4)
> + dma_unmap_single(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4, e5;
> @@
> - pci_map_page(e1, e2, e3, e4, e5)
> + dma_map_page(&e1->dev, e2, e3, e4, e5)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_unmap_page(e1, e2, e3, e4)
> + dma_unmap_page(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_map_sg(e1, e2, e3, e4)
> + dma_map_sg(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_unmap_sg(e1, e2, e3, e4)
> + dma_unmap_sg(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
> + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_dma_sync_single_for_device(e1, e2, e3, e4)
> + dma_sync_single_for_device(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
> + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_dma_sync_sg_for_device(e1, e2, e3, e4)
> + dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2;
> @@
> - pci_dma_mapping_error(e1, e2)
> + dma_mapping_error(&e1->dev, e2)
>
> @@
> expression e1, e2;
> @@
> - pci_set_dma_mask(e1, e2)
> + dma_set_mask(&e1->dev, e2)
>
> @@
> expression e1, e2;
> @@
> - pci_set_consistent_dma_mask(e1, e2)
> + dma_set_coherent_mask(&e1->dev, e2)
>
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> ---
> If needed, see post from Christoph Hellwig on the kernel-janitors ML:
> https://marc.info/?l=kernel-janitors&m=158745678307186&w=4
> ---
> drivers/misc/hpilo.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
> index 10c975662f8b..c9539c89a925 100644
> --- a/drivers/misc/hpilo.c
> +++ b/drivers/misc/hpilo.c
> @@ -256,7 +256,8 @@ static void ilo_ccb_close(struct pci_dev *pdev, struct ccb_data *data)
> memset_io(device_ccb, 0, sizeof(struct ccb));
>
> /* free resources used to back send/recv queues */
> - pci_free_consistent(pdev, data->dma_size, data->dma_va, data->dma_pa);
> + dma_free_coherent(&pdev->dev, data->dma_size, data->dma_va,
> + data->dma_pa);
> }
>
> static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
> @@ -272,8 +273,8 @@ static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
> 2 * desc_mem_sz(NR_QENTRY) +
> ILO_START_ALIGN + ILO_CACHE_SZ;
>
> - data->dma_va = pci_alloc_consistent(hw->ilo_dev, data->dma_size,
> - &data->dma_pa);
> + data->dma_va = dma_alloc_coherent(&hw->ilo_dev->dev, data->dma_size,
> + &data->dma_pa, GFP_ATOMIC);
This is being called from open() so it can be GFP_KERNEL. Can you fix
that up and resend a new version?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] misc: hpilo: switch from 'pci_' to 'dma_' API
@ 2020-07-23 7:34 ` Greg KH
0 siblings, 0 replies; 8+ messages in thread
From: Greg KH @ 2020-07-23 7:34 UTC (permalink / raw)
To: Christophe JAILLET; +Cc: arnd, linux-kernel, kernel-janitors
On Sat, Jul 18, 2020 at 09:02:24AM +0200, Christophe JAILLET wrote:
> The wrappers in include/linux/pci-dma-compat.h should go away.
>
> The patch has been generated with the coccinelle script below and has been
> hand modified to replace GFP_ with a correct flag.
> It has been compile tested.
>
> When memory is allocated in 'ilo_ccb_setup()' GFP_ATOMIC must be used
> because a spin_lock is hold in 'ilo_open()' before calling
> 'ilo_ccb_setup()'
>
> @@
> @@
> - PCI_DMA_BIDIRECTIONAL
> + DMA_BIDIRECTIONAL
>
> @@
> @@
> - PCI_DMA_TODEVICE
> + DMA_TO_DEVICE
>
> @@
> @@
> - PCI_DMA_FROMDEVICE
> + DMA_FROM_DEVICE
>
> @@
> @@
> - PCI_DMA_NONE
> + DMA_NONE
>
> @@
> expression e1, e2, e3;
> @@
> - pci_alloc_consistent(e1, e2, e3)
> + dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
>
> @@
> expression e1, e2, e3;
> @@
> - pci_zalloc_consistent(e1, e2, e3)
> + dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_free_consistent(e1, e2, e3, e4)
> + dma_free_coherent(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_map_single(e1, e2, e3, e4)
> + dma_map_single(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_unmap_single(e1, e2, e3, e4)
> + dma_unmap_single(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4, e5;
> @@
> - pci_map_page(e1, e2, e3, e4, e5)
> + dma_map_page(&e1->dev, e2, e3, e4, e5)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_unmap_page(e1, e2, e3, e4)
> + dma_unmap_page(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_map_sg(e1, e2, e3, e4)
> + dma_map_sg(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_unmap_sg(e1, e2, e3, e4)
> + dma_unmap_sg(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
> + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_dma_sync_single_for_device(e1, e2, e3, e4)
> + dma_sync_single_for_device(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
> + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2, e3, e4;
> @@
> - pci_dma_sync_sg_for_device(e1, e2, e3, e4)
> + dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
>
> @@
> expression e1, e2;
> @@
> - pci_dma_mapping_error(e1, e2)
> + dma_mapping_error(&e1->dev, e2)
>
> @@
> expression e1, e2;
> @@
> - pci_set_dma_mask(e1, e2)
> + dma_set_mask(&e1->dev, e2)
>
> @@
> expression e1, e2;
> @@
> - pci_set_consistent_dma_mask(e1, e2)
> + dma_set_coherent_mask(&e1->dev, e2)
>
> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> ---
> If needed, see post from Christoph Hellwig on the kernel-janitors ML:
> https://marc.info/?l=kernel-janitors&m\x158745678307186&w=4
> ---
> drivers/misc/hpilo.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
> index 10c975662f8b..c9539c89a925 100644
> --- a/drivers/misc/hpilo.c
> +++ b/drivers/misc/hpilo.c
> @@ -256,7 +256,8 @@ static void ilo_ccb_close(struct pci_dev *pdev, struct ccb_data *data)
> memset_io(device_ccb, 0, sizeof(struct ccb));
>
> /* free resources used to back send/recv queues */
> - pci_free_consistent(pdev, data->dma_size, data->dma_va, data->dma_pa);
> + dma_free_coherent(&pdev->dev, data->dma_size, data->dma_va,
> + data->dma_pa);
> }
>
> static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
> @@ -272,8 +273,8 @@ static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
> 2 * desc_mem_sz(NR_QENTRY) +
> ILO_START_ALIGN + ILO_CACHE_SZ;
>
> - data->dma_va = pci_alloc_consistent(hw->ilo_dev, data->dma_size,
> - &data->dma_pa);
> + data->dma_va = dma_alloc_coherent(&hw->ilo_dev->dev, data->dma_size,
> + &data->dma_pa, GFP_ATOMIC);
This is being called from open() so it can be GFP_KERNEL. Can you fix
that up and resend a new version?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] misc: hpilo: switch from 'pci_' to 'dma_' API
2020-07-23 7:34 ` Greg KH
@ 2020-07-23 8:59 ` Christophe JAILLET
-1 siblings, 0 replies; 8+ messages in thread
From: Christophe JAILLET @ 2020-07-23 8:59 UTC (permalink / raw)
To: Greg KH; +Cc: arnd, linux-kernel, kernel-janitors
Le 23/07/2020 à 09:34, Greg KH a écrit :
> On Sat, Jul 18, 2020 at 09:02:24AM +0200, Christophe JAILLET wrote:
>> The wrappers in include/linux/pci-dma-compat.h should go away.
>>
>> The patch has been generated with the coccinelle script below and has been
>> hand modified to replace GFP_ with a correct flag.
>> It has been compile tested.
>>
>> When memory is allocated in 'ilo_ccb_setup()' GFP_ATOMIC must be used
>> because a spin_lock is hold in 'ilo_open()' before calling
>> 'ilo_ccb_setup()'
^
|
>> [...]
>>
>> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
>> ---
>> If needed, see post from Christoph Hellwig on the kernel-janitors ML:
>> https://marc.info/?l=kernel-janitors&m=158745678307186&w=4
>> ---
>> drivers/misc/hpilo.c | 7 ++++---
>> 1 file changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
>> index 10c975662f8b..c9539c89a925 100644
>> --- a/drivers/misc/hpilo.c
>> +++ b/drivers/misc/hpilo.c
>> @@ -256,7 +256,8 @@ static void ilo_ccb_close(struct pci_dev *pdev, struct ccb_data *data)
>> memset_io(device_ccb, 0, sizeof(struct ccb));
>>
>> /* free resources used to back send/recv queues */
>> - pci_free_consistent(pdev, data->dma_size, data->dma_va, data->dma_pa);
>> + dma_free_coherent(&pdev->dev, data->dma_size, data->dma_va,
>> + data->dma_pa);
>> }
>>
>> static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
>> @@ -272,8 +273,8 @@ static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
>> 2 * desc_mem_sz(NR_QENTRY) +
>> ILO_START_ALIGN + ILO_CACHE_SZ;
>>
>> - data->dma_va = pci_alloc_consistent(hw->ilo_dev, data->dma_size,
>> - &data->dma_pa);
>> + data->dma_va = dma_alloc_coherent(&hw->ilo_dev->dev, data->dma_size,
>> + &data->dma_pa, GFP_ATOMIC);
>
> This is being called from open() so it can be GFP_KERNEL. Can you fix
> that up and resend a new version?
>
> thanks,
>
> greg k-h
>
The call chain is:
.open (file_operations)
--> ilo_open
spin_lock(&hw->open_lock); (around line 782)
--> ilo_ccb_setup (hw->open_lock is still hold)
So I think that GFP_ATOMIC is needed here, or the code should be
reworked to avoid holding the spin_lock when ilo_ccb_setup is called.
CJ
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] misc: hpilo: switch from 'pci_' to 'dma_' API
@ 2020-07-23 8:59 ` Christophe JAILLET
0 siblings, 0 replies; 8+ messages in thread
From: Christophe JAILLET @ 2020-07-23 8:59 UTC (permalink / raw)
To: Greg KH; +Cc: arnd, linux-kernel, kernel-janitors
Le 23/07/2020 à 09:34, Greg KH a écrit :
> On Sat, Jul 18, 2020 at 09:02:24AM +0200, Christophe JAILLET wrote:
>> The wrappers in include/linux/pci-dma-compat.h should go away.
>>
>> The patch has been generated with the coccinelle script below and has been
>> hand modified to replace GFP_ with a correct flag.
>> It has been compile tested.
>>
>> When memory is allocated in 'ilo_ccb_setup()' GFP_ATOMIC must be used
>> because a spin_lock is hold in 'ilo_open()' before calling
>> 'ilo_ccb_setup()'
^
|
>> [...]
>>
>> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
>> ---
>> If needed, see post from Christoph Hellwig on the kernel-janitors ML:
>> https://marc.info/?l=kernel-janitors&m\x158745678307186&w=4
>> ---
>> drivers/misc/hpilo.c | 7 ++++---
>> 1 file changed, 4 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
>> index 10c975662f8b..c9539c89a925 100644
>> --- a/drivers/misc/hpilo.c
>> +++ b/drivers/misc/hpilo.c
>> @@ -256,7 +256,8 @@ static void ilo_ccb_close(struct pci_dev *pdev, struct ccb_data *data)
>> memset_io(device_ccb, 0, sizeof(struct ccb));
>>
>> /* free resources used to back send/recv queues */
>> - pci_free_consistent(pdev, data->dma_size, data->dma_va, data->dma_pa);
>> + dma_free_coherent(&pdev->dev, data->dma_size, data->dma_va,
>> + data->dma_pa);
>> }
>>
>> static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
>> @@ -272,8 +273,8 @@ static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
>> 2 * desc_mem_sz(NR_QENTRY) +
>> ILO_START_ALIGN + ILO_CACHE_SZ;
>>
>> - data->dma_va = pci_alloc_consistent(hw->ilo_dev, data->dma_size,
>> - &data->dma_pa);
>> + data->dma_va = dma_alloc_coherent(&hw->ilo_dev->dev, data->dma_size,
>> + &data->dma_pa, GFP_ATOMIC);
>
> This is being called from open() so it can be GFP_KERNEL. Can you fix
> that up and resend a new version?
>
> thanks,
>
> greg k-h
>
The call chain is:
.open (file_operations)
--> ilo_open
spin_lock(&hw->open_lock); (around line 782)
--> ilo_ccb_setup (hw->open_lock is still hold)
So I think that GFP_ATOMIC is needed here, or the code should be
reworked to avoid holding the spin_lock when ilo_ccb_setup is called.
CJ
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] misc: hpilo: switch from 'pci_' to 'dma_' API
2020-07-23 8:59 ` Christophe JAILLET
@ 2020-07-23 10:56 ` Greg KH
-1 siblings, 0 replies; 8+ messages in thread
From: Greg KH @ 2020-07-23 10:56 UTC (permalink / raw)
To: Christophe JAILLET; +Cc: arnd, linux-kernel, kernel-janitors
On Thu, Jul 23, 2020 at 10:59:49AM +0200, Christophe JAILLET wrote:
> Le 23/07/2020 à 09:34, Greg KH a écrit :
> > On Sat, Jul 18, 2020 at 09:02:24AM +0200, Christophe JAILLET wrote:
> > > The wrappers in include/linux/pci-dma-compat.h should go away.
> > >
> > > The patch has been generated with the coccinelle script below and has been
> > > hand modified to replace GFP_ with a correct flag.
> > > It has been compile tested.
> > >
> > > When memory is allocated in 'ilo_ccb_setup()' GFP_ATOMIC must be used
> > > because a spin_lock is hold in 'ilo_open()' before calling
> > > 'ilo_ccb_setup()'
>
> ^
> |
{sigh} see how well I read changelog text...
>
> > > [...]
> > >
> > > Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> > > ---
> > > If needed, see post from Christoph Hellwig on the kernel-janitors ML:
> > > https://marc.info/?l=kernel-janitors&m=158745678307186&w=4
> > > ---
> > > drivers/misc/hpilo.c | 7 ++++---
> > > 1 file changed, 4 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
> > > index 10c975662f8b..c9539c89a925 100644
> > > --- a/drivers/misc/hpilo.c
> > > +++ b/drivers/misc/hpilo.c
> > > @@ -256,7 +256,8 @@ static void ilo_ccb_close(struct pci_dev *pdev, struct ccb_data *data)
> > > memset_io(device_ccb, 0, sizeof(struct ccb));
> > > /* free resources used to back send/recv queues */
> > > - pci_free_consistent(pdev, data->dma_size, data->dma_va, data->dma_pa);
> > > + dma_free_coherent(&pdev->dev, data->dma_size, data->dma_va,
> > > + data->dma_pa);
> > > }
> > > static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
> > > @@ -272,8 +273,8 @@ static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
> > > 2 * desc_mem_sz(NR_QENTRY) +
> > > ILO_START_ALIGN + ILO_CACHE_SZ;
> > > - data->dma_va = pci_alloc_consistent(hw->ilo_dev, data->dma_size,
> > > - &data->dma_pa);
> > > + data->dma_va = dma_alloc_coherent(&hw->ilo_dev->dev, data->dma_size,
> > > + &data->dma_pa, GFP_ATOMIC);
> >
> > This is being called from open() so it can be GFP_KERNEL. Can you fix
> > that up and resend a new version?
> >
> > thanks,
> >
> > greg k-h
> >
>
> The call chain is:
> .open (file_operations)
> --> ilo_open
> spin_lock(&hw->open_lock); (around line 782)
> --> ilo_ccb_setup (hw->open_lock is still hold)
>
> So I think that GFP_ATOMIC is needed here, or the code should be reworked to
> avoid holding the spin_lock when ilo_ccb_setup is called.
Ok, fair enough, this patch is ok as-is, I'll go queue it up. Further
fixes for this to move the spinlock out from this is probably a good
idea, if anyone cares about this driver anymore.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH 1/2] misc: hpilo: switch from 'pci_' to 'dma_' API
@ 2020-07-23 10:56 ` Greg KH
0 siblings, 0 replies; 8+ messages in thread
From: Greg KH @ 2020-07-23 10:56 UTC (permalink / raw)
To: Christophe JAILLET; +Cc: arnd, linux-kernel, kernel-janitors
On Thu, Jul 23, 2020 at 10:59:49AM +0200, Christophe JAILLET wrote:
> Le 23/07/2020 à 09:34, Greg KH a écrit :
> > On Sat, Jul 18, 2020 at 09:02:24AM +0200, Christophe JAILLET wrote:
> > > The wrappers in include/linux/pci-dma-compat.h should go away.
> > >
> > > The patch has been generated with the coccinelle script below and has been
> > > hand modified to replace GFP_ with a correct flag.
> > > It has been compile tested.
> > >
> > > When memory is allocated in 'ilo_ccb_setup()' GFP_ATOMIC must be used
> > > because a spin_lock is hold in 'ilo_open()' before calling
> > > 'ilo_ccb_setup()'
>
> ^
> |
{sigh} see how well I read changelog text...
>
> > > [...]
> > >
> > > Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> > > ---
> > > If needed, see post from Christoph Hellwig on the kernel-janitors ML:
> > > https://marc.info/?l=kernel-janitors&m\x158745678307186&w=4
> > > ---
> > > drivers/misc/hpilo.c | 7 ++++---
> > > 1 file changed, 4 insertions(+), 3 deletions(-)
> > >
> > > diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
> > > index 10c975662f8b..c9539c89a925 100644
> > > --- a/drivers/misc/hpilo.c
> > > +++ b/drivers/misc/hpilo.c
> > > @@ -256,7 +256,8 @@ static void ilo_ccb_close(struct pci_dev *pdev, struct ccb_data *data)
> > > memset_io(device_ccb, 0, sizeof(struct ccb));
> > > /* free resources used to back send/recv queues */
> > > - pci_free_consistent(pdev, data->dma_size, data->dma_va, data->dma_pa);
> > > + dma_free_coherent(&pdev->dev, data->dma_size, data->dma_va,
> > > + data->dma_pa);
> > > }
> > > static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
> > > @@ -272,8 +273,8 @@ static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
> > > 2 * desc_mem_sz(NR_QENTRY) +
> > > ILO_START_ALIGN + ILO_CACHE_SZ;
> > > - data->dma_va = pci_alloc_consistent(hw->ilo_dev, data->dma_size,
> > > - &data->dma_pa);
> > > + data->dma_va = dma_alloc_coherent(&hw->ilo_dev->dev, data->dma_size,
> > > + &data->dma_pa, GFP_ATOMIC);
> >
> > This is being called from open() so it can be GFP_KERNEL. Can you fix
> > that up and resend a new version?
> >
> > thanks,
> >
> > greg k-h
> >
>
> The call chain is:
> .open (file_operations)
> --> ilo_open
> spin_lock(&hw->open_lock); (around line 782)
> --> ilo_ccb_setup (hw->open_lock is still hold)
>
> So I think that GFP_ATOMIC is needed here, or the code should be reworked to
> avoid holding the spin_lock when ilo_ccb_setup is called.
Ok, fair enough, this patch is ok as-is, I'll go queue it up. Further
fixes for this to move the spinlock out from this is probably a good
idea, if anyone cares about this driver anymore.
thanks,
greg k-h
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2020-07-23 10:56 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-18 7:02 [PATCH 1/2] misc: hpilo: switch from 'pci_' to 'dma_' API Christophe JAILLET
2020-07-18 7:02 ` Christophe JAILLET
2020-07-23 7:34 ` Greg KH
2020-07-23 7:34 ` Greg KH
2020-07-23 8:59 ` Christophe JAILLET
2020-07-23 8:59 ` Christophe JAILLET
2020-07-23 10:56 ` Greg KH
2020-07-23 10:56 ` Greg KH
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.