* [PATCH v8 0/2] input: ADC joystick driver & DT bindings @ 2020-07-19 22:11 Artur Rojek 2020-07-19 22:11 ` [PATCH v8 1/2] dt-bindings: input: Add docs for ADC driven joystick Artur Rojek ` (2 more replies) 0 siblings, 3 replies; 6+ messages in thread From: Artur Rojek @ 2020-07-19 22:11 UTC (permalink / raw) To: Dmitry Torokhov, Rob Herring, Mark Rutland, Jonathan Cameron, Paul Cercueil, Andy Shevchenko Cc: Heiko Stuebner, Ezequiel Garcia, linux-input, devicetree, linux-kernel, Artur Rojek Hi all, this series is a continuation of adc-joystick changes split from: https://lore.kernel.org/linux-iio/20200709152200.10039-1-contact@artur-rojek.eu/ Rob, the bindings example in patch 1/2 depends on changes introduced in another patchset, still to be merged: https://lore.kernel.org/linux-iio/20200719205307.87385-4-contact@artur-rojek.eu/ Your scripts will most likely fail to validate this. You have already reviewed this patch when it was still part of the aforementioned series. Cheers, Artur Artur Rojek (2): dt-bindings: input: Add docs for ADC driven joystick. input: joystick: Add ADC attached joystick driver. .../bindings/input/adc-joystick.yaml | 121 +++++++++ drivers/input/joystick/Kconfig | 10 + drivers/input/joystick/Makefile | 1 + drivers/input/joystick/adc-joystick.c | 253 ++++++++++++++++++ 4 files changed, 385 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/adc-joystick.yaml create mode 100644 drivers/input/joystick/adc-joystick.c -- 2.27.0 ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v8 1/2] dt-bindings: input: Add docs for ADC driven joystick. 2020-07-19 22:11 [PATCH v8 0/2] input: ADC joystick driver & DT bindings Artur Rojek @ 2020-07-19 22:11 ` Artur Rojek 2020-07-20 16:32 ` Rob Herring 2020-07-19 22:11 ` [PATCH v8 2/2] input: joystick: Add ADC attached joystick driver Artur Rojek 2020-07-20 9:57 ` [PATCH v8 0/2] input: ADC joystick driver & DT bindings Jonathan Cameron 2 siblings, 1 reply; 6+ messages in thread From: Artur Rojek @ 2020-07-19 22:11 UTC (permalink / raw) To: Dmitry Torokhov, Rob Herring, Mark Rutland, Jonathan Cameron, Paul Cercueil, Andy Shevchenko Cc: Heiko Stuebner, Ezequiel Garcia, linux-input, devicetree, linux-kernel, Artur Rojek, Rob Herring Add documentation for the adc-joystick driver, used to provide support for joysticks connected over ADC. Signed-off-by: Artur Rojek <contact@artur-rojek.eu> Tested-by: Paul Cercueil <paul@crapouillou.net> Reviewed-by: Rob Herring <robh@kernel.org> --- Changes: v2: - Add `reg` property to axis subnode in order to enumerate the axes, - rename `linux,abs-code` property to `linux,code`, - drop `linux,` prefix from the remaining properties of axis subnode v3: no change v4: - remove "bindings" from the unique identifier string, - replace `|` with `>` for all description properties, - specify the number of items for `io-channels`, - correct the regex pattern of `axis` property, - specify the value range of `reg` property for each axis, - put `abs-range` properties under `allOf` v5: add `a-f` to the regex pattern of `axis` property v6-v8: no change Notes: Rob, the bindings example in this patch depends on changes introduced in another patchset, still to be merged: https://lore.kernel.org/linux-iio/20200719205307.87385-4-contact@artur-rojek.eu/ Your scripts will most likely fail to validate this. .../bindings/input/adc-joystick.yaml | 121 ++++++++++++++++++ 1 file changed, 121 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/adc-joystick.yaml diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml new file mode 100644 index 000000000000..054406bbd22b --- /dev/null +++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml @@ -0,0 +1,121 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019-2020 Artur Rojek +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/input/adc-joystick.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: ADC attached joystick + +maintainers: + - Artur Rojek <contact@artur-rojek.eu> + +description: > + Bindings for joystick devices connected to ADC controllers supporting + the Industrial I/O subsystem. + +properties: + compatible: + const: adc-joystick + + io-channels: + minItems: 1 + maxItems: 1024 + description: > + List of phandle and IIO specifier pairs. + Each pair defines one ADC channel to which a joystick axis is connected. + See Documentation/devicetree/bindings/iio/iio-bindings.txt for details. + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +required: + - compatible + - io-channels + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +patternProperties: + "^axis@[0-9a-f]+$": + type: object + description: > + Represents a joystick axis bound to the given ADC channel. + For each entry in the io-channels list, one axis subnode with a matching + reg property must be specified. + + properties: + reg: + minimum: 0 + maximum: 1023 + description: Index of an io-channels list entry bound to this axis. + + linux,code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: EV_ABS specific event code generated by the axis. + + abs-range: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - items: + - description: minimum value + - description: maximum value + description: > + Minimum and maximum values produced by the axis. + For an ABS_X axis this will be the left-most and right-most + inclination of the joystick. If min > max, it is left to userspace to + treat the axis as inverted. + This property is interpreted as two signed 32 bit values. + + abs-fuzz: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Amount of noise in the input value. + Omitting this property indicates the axis is precise. + + abs-flat: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Axial "deadzone", or area around the center position, where the axis + is considered to be at rest. + Omitting this property indicates the axis always returns to exactly + the center position. + + required: + - reg + - linux,code + - abs-range + + additionalProperties: false + +examples: + - | + #include <dt-bindings/iio/adc/ingenic,adc.h> + #include <dt-bindings/input/input.h> + + joystick: adc-joystick { + compatible = "adc-joystick"; + io-channels = <&adc INGENIC_ADC_TOUCH_XP>, + <&adc INGENIC_ADC_TOUCH_YP>; + #address-cells = <1>; + #size-cells = <0>; + + axis@0 { + reg = <0>; + linux,code = <ABS_X>; + abs-range = <3300 0>; + abs-fuzz = <4>; + abs-flat = <200>; + }; + axis@1 { + reg = <1>; + linux,code = <ABS_Y>; + abs-range = <0 3300>; + abs-fuzz = <4>; + abs-flat = <200>; + }; + }; -- 2.27.0 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v8 1/2] dt-bindings: input: Add docs for ADC driven joystick. 2020-07-19 22:11 ` [PATCH v8 1/2] dt-bindings: input: Add docs for ADC driven joystick Artur Rojek @ 2020-07-20 16:32 ` Rob Herring 0 siblings, 0 replies; 6+ messages in thread From: Rob Herring @ 2020-07-20 16:32 UTC (permalink / raw) To: Artur Rojek Cc: devicetree, linux-kernel, Mark Rutland, Rob Herring, Jonathan Cameron, Andy Shevchenko, Paul Cercueil, Ezequiel Garcia, Heiko Stuebner, Dmitry Torokhov, linux-input On Mon, 20 Jul 2020 00:11:02 +0200, Artur Rojek wrote: > Add documentation for the adc-joystick driver, used to provide support > for joysticks connected over ADC. > > Signed-off-by: Artur Rojek <contact@artur-rojek.eu> > Tested-by: Paul Cercueil <paul@crapouillou.net> > Reviewed-by: Rob Herring <robh@kernel.org> > --- > > Changes: > > v2: - Add `reg` property to axis subnode in order to enumerate the axes, > - rename `linux,abs-code` property to `linux,code`, > - drop `linux,` prefix from the remaining properties of axis subnode > > v3: no change > > v4: - remove "bindings" from the unique identifier string, > - replace `|` with `>` for all description properties, > - specify the number of items for `io-channels`, > - correct the regex pattern of `axis` property, > - specify the value range of `reg` property for each axis, > - put `abs-range` properties under `allOf` > > v5: add `a-f` to the regex pattern of `axis` property > > v6-v8: no change > > Notes: > > Rob, the bindings example in this patch depends on changes introduced > in another patchset, still to be merged: > https://lore.kernel.org/linux-iio/20200719205307.87385-4-contact@artur-rojek.eu/ > Your scripts will most likely fail to validate this. > > .../bindings/input/adc-joystick.yaml | 121 ++++++++++++++++++ > 1 file changed, 121 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/adc-joystick.yaml > My bot found errors running 'make dt_binding_check' on your patch: Error: Documentation/devicetree/bindings/input/adc-joystick.example.dts:24.31-32 syntax error FATAL ERROR: Unable to parse input tree scripts/Makefile.lib:315: recipe for target 'Documentation/devicetree/bindings/input/adc-joystick.example.dt.yaml' failed make[1]: *** [Documentation/devicetree/bindings/input/adc-joystick.example.dt.yaml] Error 1 make[1]: *** Waiting for unfinished jobs.... Makefile:1347: recipe for target 'dt_binding_check' failed make: *** [dt_binding_check] Error 2 See https://patchwork.ozlabs.org/patch/1331964 If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure dt-schema is up to date: pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade Please check and re-submit. ^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v8 2/2] input: joystick: Add ADC attached joystick driver. 2020-07-19 22:11 [PATCH v8 0/2] input: ADC joystick driver & DT bindings Artur Rojek 2020-07-19 22:11 ` [PATCH v8 1/2] dt-bindings: input: Add docs for ADC driven joystick Artur Rojek @ 2020-07-19 22:11 ` Artur Rojek 2020-07-20 10:04 ` Jonathan Cameron 2020-07-20 9:57 ` [PATCH v8 0/2] input: ADC joystick driver & DT bindings Jonathan Cameron 2 siblings, 1 reply; 6+ messages in thread From: Artur Rojek @ 2020-07-19 22:11 UTC (permalink / raw) To: Dmitry Torokhov, Rob Herring, Mark Rutland, Jonathan Cameron, Paul Cercueil, Andy Shevchenko Cc: Heiko Stuebner, Ezequiel Garcia, linux-input, devicetree, linux-kernel, Artur Rojek Add a driver for joystick devices connected to ADC controllers supporting the Industrial I/O subsystem. Signed-off-by: Artur Rojek <contact@artur-rojek.eu> Tested-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- Changes: v2: - sanity check supported channel format on probe, - rename adc_joystick_disable to a more sensible adc_joystick_cleanup, - enforce correct axis order by checking the `reg` property of child nodes v3-v5: no change v6: - remove redundant `<linux/of.h>` - set `val` for each endianness case in their respective branches - pass received error codes to return value of `adc_joystick_set_axes` - change `(bits >> 3) > 2` to `bits > 16` for readability - drop `of_match_ptr` v7: no change v8: - respect scan index when reading channel data, - solve sparse warnings related to *_to_cpu calls, - simplify channel count logic, - drop the redundant comma from adc_joystick_of_match[] drivers/input/joystick/Kconfig | 10 + drivers/input/joystick/Makefile | 1 + drivers/input/joystick/adc-joystick.c | 253 ++++++++++++++++++++++++++ 3 files changed, 264 insertions(+) create mode 100644 drivers/input/joystick/adc-joystick.c diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig index eb031b7a4866..b080f0cfb068 100644 --- a/drivers/input/joystick/Kconfig +++ b/drivers/input/joystick/Kconfig @@ -42,6 +42,16 @@ config JOYSTICK_A3D To compile this driver as a module, choose M here: the module will be called a3d. +config JOYSTICK_ADC + tristate "Simple joystick connected over ADC" + depends on IIO + select IIO_BUFFER_CB + help + Say Y here if you have a simple joystick connected over ADC. + + To compile this driver as a module, choose M here: the + module will be called adc-joystick. + config JOYSTICK_ADI tristate "Logitech ADI digital joysticks and gamepads" select GAMEPORT diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile index 8656023f6ef5..58232b3057d3 100644 --- a/drivers/input/joystick/Makefile +++ b/drivers/input/joystick/Makefile @@ -6,6 +6,7 @@ # Each configuration option enables a list of files. obj-$(CONFIG_JOYSTICK_A3D) += a3d.o +obj-$(CONFIG_JOYSTICK_ADC) += adc-joystick.o obj-$(CONFIG_JOYSTICK_ADI) += adi.o obj-$(CONFIG_JOYSTICK_AMIGA) += amijoy.o obj-$(CONFIG_JOYSTICK_AS5011) += as5011.o diff --git a/drivers/input/joystick/adc-joystick.c b/drivers/input/joystick/adc-joystick.c new file mode 100644 index 000000000000..a2c570de0b8a --- /dev/null +++ b/drivers/input/joystick/adc-joystick.c @@ -0,0 +1,253 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Input driver for joysticks connected over ADC. + * Copyright (c) 2019-2020 Artur Rojek <contact@artur-rojek.eu> + */ +#include <linux/ctype.h> +#include <linux/input.h> +#include <linux/iio/iio.h> +#include <linux/iio/consumer.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/property.h> + +struct adc_joystick_axis { + u32 code; + s32 range[2]; + s32 fuzz; + s32 flat; +}; + +struct adc_joystick { + struct input_dev *input; + struct iio_cb_buffer *buffer; + struct adc_joystick_axis *axes; + struct iio_channel *chans; + int num_chans; +}; + +static int adc_joystick_handle(const void *data, void *private) +{ + struct adc_joystick *joy = private; + enum iio_endian endianness; + int bytes, msb, val, idx, i; + bool sign; + + bytes = joy->chans[0].channel->scan_type.storagebits >> 3; + + for (i = 0; i < joy->num_chans; ++i) { + idx = joy->chans[i].channel->scan_index; + endianness = joy->chans[i].channel->scan_type.endianness; + msb = joy->chans[i].channel->scan_type.realbits - 1; + sign = (tolower(joy->chans[i].channel->scan_type.sign) == 's'); + + switch (bytes) { + case 1: + val = ((const u8 *)data)[idx]; + break; + case 2: + if (endianness == IIO_BE) + val = be16_to_cpu(((const __be16 *)data)[idx]); + else if (endianness == IIO_LE) + val = le16_to_cpu(((const __le16 *)data)[idx]); + else /* IIO_CPU */ + val = ((const u16 *)data)[idx]; + break; + default: + return -EINVAL; + } + + val >>= joy->chans[i].channel->scan_type.shift; + if (sign) + val = sign_extend32(val, msb); + else + val &= GENMASK(msb, 0); + input_report_abs(joy->input, joy->axes[i].code, val); + } + + input_sync(joy->input); + + return 0; +} + +static int adc_joystick_open(struct input_dev *dev) +{ + struct adc_joystick *joy = input_get_drvdata(dev); + int ret; + + ret = iio_channel_start_all_cb(joy->buffer); + if (ret) + dev_err(dev->dev.parent, "Unable to start callback buffer"); + + return ret; +} + +static void adc_joystick_close(struct input_dev *dev) +{ + struct adc_joystick *joy = input_get_drvdata(dev); + + iio_channel_stop_all_cb(joy->buffer); +} + +static void adc_joystick_cleanup(void *data) +{ + iio_channel_release_all_cb(data); +} + +static int adc_joystick_set_axes(struct device *dev, struct adc_joystick *joy) +{ + struct adc_joystick_axis *axes; + struct fwnode_handle *child; + int num_axes, ret, i; + + num_axes = device_get_child_node_count(dev); + if (!num_axes) { + dev_err(dev, "Unable to find child nodes"); + return -EINVAL; + } + + if (num_axes != joy->num_chans) { + dev_err(dev, "Got %d child nodes for %d channels", + num_axes, joy->num_chans); + return -EINVAL; + } + + axes = devm_kmalloc_array(dev, num_axes, sizeof(*axes), GFP_KERNEL); + if (!axes) + return -ENOMEM; + + device_for_each_child_node(dev, child) { + ret = fwnode_property_read_u32(child, "reg", &i); + if (ret) { + dev_err(dev, "reg invalid or missing"); + goto err; + } + + if (i >= num_axes) { + ret = -EINVAL; + dev_err(dev, "No matching axis for reg %d", i); + goto err; + } + + ret = fwnode_property_read_u32(child, "linux,code", + &axes[i].code); + if (ret) { + dev_err(dev, "linux,code invalid or missing"); + goto err; + } + + ret = fwnode_property_read_u32_array(child, "abs-range", + axes[i].range, 2); + if (ret) { + dev_err(dev, "abs-range invalid or missing"); + goto err; + } + + fwnode_property_read_u32(child, "abs-fuzz", + &axes[i].fuzz); + fwnode_property_read_u32(child, "abs-flat", + &axes[i].flat); + + input_set_abs_params(joy->input, axes[i].code, + axes[i].range[0], axes[i].range[1], + axes[i].fuzz, + axes[i].flat); + input_set_capability(joy->input, EV_ABS, axes[i].code); + } + + joy->axes = axes; + + return 0; + +err: + fwnode_handle_put(child); + return ret; +} + +static int adc_joystick_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct adc_joystick *joy; + struct input_dev *input; + int bits, ret, i; + + joy = devm_kzalloc(dev, sizeof(*joy), GFP_KERNEL); + if (!joy) + return -ENOMEM; + + joy->chans = devm_iio_channel_get_all(dev); + if (IS_ERR(joy->chans)) { + ret = PTR_ERR(joy->chans); + if (ret != -EPROBE_DEFER) + dev_err(dev, "Unable to get IIO channels"); + return ret; + } + + /* Count how many channels we got. NULL terminated. */ + for (i = 0; joy->chans[i].indio_dev; ++i) { + bits = joy->chans[i].channel->scan_type.storagebits; + if (!bits || (bits > 16)) { + dev_err(dev, "Unsupported channel storage size"); + return -EINVAL; + } + if (bits != joy->chans[0].channel->scan_type.storagebits) { + dev_err(dev, "Channels must have equal storage size"); + return -EINVAL; + } + } + joy->num_chans = i; + + input = devm_input_allocate_device(dev); + if (!input) { + dev_err(dev, "Unable to allocate input device"); + return -ENOMEM; + } + + joy->input = input; + input->name = pdev->name; + input->id.bustype = BUS_HOST; + input->open = adc_joystick_open; + input->close = adc_joystick_close; + + ret = adc_joystick_set_axes(dev, joy); + if (ret) + return ret; + + input_set_drvdata(input, joy); + ret = input_register_device(input); + if (ret) { + dev_err(dev, "Unable to register input device: %d", ret); + return ret; + } + + joy->buffer = iio_channel_get_all_cb(dev, adc_joystick_handle, joy); + if (IS_ERR(joy->buffer)) { + dev_err(dev, "Unable to allocate callback buffer"); + return PTR_ERR(joy->buffer); + } + + ret = devm_add_action_or_reset(dev, adc_joystick_cleanup, joy->buffer); + if (ret) + dev_err(dev, "Unable to add action"); + + return ret; +} + +static const struct of_device_id adc_joystick_of_match[] = { + { .compatible = "adc-joystick", }, + { } +}; +MODULE_DEVICE_TABLE(of, adc_joystick_of_match); + +static struct platform_driver adc_joystick_driver = { + .driver = { + .name = "adc-joystick", + .of_match_table = adc_joystick_of_match, + }, + .probe = adc_joystick_probe, +}; +module_platform_driver(adc_joystick_driver); + +MODULE_DESCRIPTION("Input driver for joysticks connected over ADC"); +MODULE_AUTHOR("Artur Rojek <contact@artur-rojek.eu>"); +MODULE_LICENSE("GPL"); -- 2.27.0 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v8 2/2] input: joystick: Add ADC attached joystick driver. 2020-07-19 22:11 ` [PATCH v8 2/2] input: joystick: Add ADC attached joystick driver Artur Rojek @ 2020-07-20 10:04 ` Jonathan Cameron 0 siblings, 0 replies; 6+ messages in thread From: Jonathan Cameron @ 2020-07-20 10:04 UTC (permalink / raw) To: Artur Rojek Cc: Dmitry Torokhov, Rob Herring, Mark Rutland, Paul Cercueil, Andy Shevchenko, Heiko Stuebner, Ezequiel Garcia, linux-input, devicetree, linux-kernel On Mon, 20 Jul 2020 00:11:03 +0200 Artur Rojek <contact@artur-rojek.eu> wrote: > Add a driver for joystick devices connected to ADC controllers > supporting the Industrial I/O subsystem. > > Signed-off-by: Artur Rojek <contact@artur-rojek.eu> > Tested-by: Paul Cercueil <paul@crapouillou.net> > Tested-by: Heiko Stuebner <heiko@sntech.de> > Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Looks good to me. Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> I'm assuming this will got through input. Jonathan > --- > > Changes: > > v2: - sanity check supported channel format on probe, > - rename adc_joystick_disable to a more sensible adc_joystick_cleanup, > - enforce correct axis order by checking the `reg` property of > child nodes > > v3-v5: no change > > v6: - remove redundant `<linux/of.h>` > - set `val` for each endianness case in their respective branches > - pass received error codes to return value of `adc_joystick_set_axes` > - change `(bits >> 3) > 2` to `bits > 16` for readability > - drop `of_match_ptr` > > v7: no change > > v8: - respect scan index when reading channel data, > - solve sparse warnings related to *_to_cpu calls, > - simplify channel count logic, > - drop the redundant comma from adc_joystick_of_match[] > > drivers/input/joystick/Kconfig | 10 + > drivers/input/joystick/Makefile | 1 + > drivers/input/joystick/adc-joystick.c | 253 ++++++++++++++++++++++++++ > 3 files changed, 264 insertions(+) > create mode 100644 drivers/input/joystick/adc-joystick.c > > diff --git a/drivers/input/joystick/Kconfig b/drivers/input/joystick/Kconfig > index eb031b7a4866..b080f0cfb068 100644 > --- a/drivers/input/joystick/Kconfig > +++ b/drivers/input/joystick/Kconfig > @@ -42,6 +42,16 @@ config JOYSTICK_A3D > To compile this driver as a module, choose M here: the > module will be called a3d. > > +config JOYSTICK_ADC > + tristate "Simple joystick connected over ADC" > + depends on IIO > + select IIO_BUFFER_CB > + help > + Say Y here if you have a simple joystick connected over ADC. > + > + To compile this driver as a module, choose M here: the > + module will be called adc-joystick. > + > config JOYSTICK_ADI > tristate "Logitech ADI digital joysticks and gamepads" > select GAMEPORT > diff --git a/drivers/input/joystick/Makefile b/drivers/input/joystick/Makefile > index 8656023f6ef5..58232b3057d3 100644 > --- a/drivers/input/joystick/Makefile > +++ b/drivers/input/joystick/Makefile > @@ -6,6 +6,7 @@ > # Each configuration option enables a list of files. > > obj-$(CONFIG_JOYSTICK_A3D) += a3d.o > +obj-$(CONFIG_JOYSTICK_ADC) += adc-joystick.o > obj-$(CONFIG_JOYSTICK_ADI) += adi.o > obj-$(CONFIG_JOYSTICK_AMIGA) += amijoy.o > obj-$(CONFIG_JOYSTICK_AS5011) += as5011.o > diff --git a/drivers/input/joystick/adc-joystick.c b/drivers/input/joystick/adc-joystick.c > new file mode 100644 > index 000000000000..a2c570de0b8a > --- /dev/null > +++ b/drivers/input/joystick/adc-joystick.c > @@ -0,0 +1,253 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Input driver for joysticks connected over ADC. > + * Copyright (c) 2019-2020 Artur Rojek <contact@artur-rojek.eu> > + */ > +#include <linux/ctype.h> > +#include <linux/input.h> > +#include <linux/iio/iio.h> > +#include <linux/iio/consumer.h> > +#include <linux/module.h> > +#include <linux/platform_device.h> > +#include <linux/property.h> > + > +struct adc_joystick_axis { > + u32 code; > + s32 range[2]; > + s32 fuzz; > + s32 flat; > +}; > + > +struct adc_joystick { > + struct input_dev *input; > + struct iio_cb_buffer *buffer; > + struct adc_joystick_axis *axes; > + struct iio_channel *chans; > + int num_chans; > +}; > + > +static int adc_joystick_handle(const void *data, void *private) > +{ > + struct adc_joystick *joy = private; > + enum iio_endian endianness; > + int bytes, msb, val, idx, i; > + bool sign; > + > + bytes = joy->chans[0].channel->scan_type.storagebits >> 3; > + > + for (i = 0; i < joy->num_chans; ++i) { > + idx = joy->chans[i].channel->scan_index; > + endianness = joy->chans[i].channel->scan_type.endianness; > + msb = joy->chans[i].channel->scan_type.realbits - 1; > + sign = (tolower(joy->chans[i].channel->scan_type.sign) == 's'); > + > + switch (bytes) { > + case 1: > + val = ((const u8 *)data)[idx]; > + break; > + case 2: > + if (endianness == IIO_BE) > + val = be16_to_cpu(((const __be16 *)data)[idx]); > + else if (endianness == IIO_LE) > + val = le16_to_cpu(((const __le16 *)data)[idx]); > + else /* IIO_CPU */ > + val = ((const u16 *)data)[idx]; > + break; > + default: > + return -EINVAL; > + } > + > + val >>= joy->chans[i].channel->scan_type.shift; > + if (sign) > + val = sign_extend32(val, msb); > + else > + val &= GENMASK(msb, 0); > + input_report_abs(joy->input, joy->axes[i].code, val); > + } > + > + input_sync(joy->input); > + > + return 0; > +} > + > +static int adc_joystick_open(struct input_dev *dev) > +{ > + struct adc_joystick *joy = input_get_drvdata(dev); > + int ret; > + > + ret = iio_channel_start_all_cb(joy->buffer); > + if (ret) > + dev_err(dev->dev.parent, "Unable to start callback buffer"); > + > + return ret; > +} > + > +static void adc_joystick_close(struct input_dev *dev) > +{ > + struct adc_joystick *joy = input_get_drvdata(dev); > + > + iio_channel_stop_all_cb(joy->buffer); > +} > + > +static void adc_joystick_cleanup(void *data) > +{ > + iio_channel_release_all_cb(data); > +} > + > +static int adc_joystick_set_axes(struct device *dev, struct adc_joystick *joy) > +{ > + struct adc_joystick_axis *axes; > + struct fwnode_handle *child; > + int num_axes, ret, i; > + > + num_axes = device_get_child_node_count(dev); > + if (!num_axes) { > + dev_err(dev, "Unable to find child nodes"); > + return -EINVAL; > + } > + > + if (num_axes != joy->num_chans) { > + dev_err(dev, "Got %d child nodes for %d channels", > + num_axes, joy->num_chans); > + return -EINVAL; > + } > + > + axes = devm_kmalloc_array(dev, num_axes, sizeof(*axes), GFP_KERNEL); > + if (!axes) > + return -ENOMEM; > + > + device_for_each_child_node(dev, child) { > + ret = fwnode_property_read_u32(child, "reg", &i); > + if (ret) { > + dev_err(dev, "reg invalid or missing"); > + goto err; > + } > + > + if (i >= num_axes) { > + ret = -EINVAL; > + dev_err(dev, "No matching axis for reg %d", i); > + goto err; > + } > + > + ret = fwnode_property_read_u32(child, "linux,code", > + &axes[i].code); > + if (ret) { > + dev_err(dev, "linux,code invalid or missing"); > + goto err; > + } > + > + ret = fwnode_property_read_u32_array(child, "abs-range", > + axes[i].range, 2); > + if (ret) { > + dev_err(dev, "abs-range invalid or missing"); > + goto err; > + } > + > + fwnode_property_read_u32(child, "abs-fuzz", > + &axes[i].fuzz); > + fwnode_property_read_u32(child, "abs-flat", > + &axes[i].flat); > + > + input_set_abs_params(joy->input, axes[i].code, > + axes[i].range[0], axes[i].range[1], > + axes[i].fuzz, > + axes[i].flat); > + input_set_capability(joy->input, EV_ABS, axes[i].code); > + } > + > + joy->axes = axes; > + > + return 0; > + > +err: > + fwnode_handle_put(child); > + return ret; > +} > + > +static int adc_joystick_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct adc_joystick *joy; > + struct input_dev *input; > + int bits, ret, i; > + > + joy = devm_kzalloc(dev, sizeof(*joy), GFP_KERNEL); > + if (!joy) > + return -ENOMEM; > + > + joy->chans = devm_iio_channel_get_all(dev); > + if (IS_ERR(joy->chans)) { > + ret = PTR_ERR(joy->chans); > + if (ret != -EPROBE_DEFER) > + dev_err(dev, "Unable to get IIO channels"); > + return ret; > + } > + > + /* Count how many channels we got. NULL terminated. */ > + for (i = 0; joy->chans[i].indio_dev; ++i) { > + bits = joy->chans[i].channel->scan_type.storagebits; > + if (!bits || (bits > 16)) { > + dev_err(dev, "Unsupported channel storage size"); > + return -EINVAL; > + } > + if (bits != joy->chans[0].channel->scan_type.storagebits) { > + dev_err(dev, "Channels must have equal storage size"); > + return -EINVAL; > + } > + } > + joy->num_chans = i; > + > + input = devm_input_allocate_device(dev); > + if (!input) { > + dev_err(dev, "Unable to allocate input device"); > + return -ENOMEM; > + } > + > + joy->input = input; > + input->name = pdev->name; > + input->id.bustype = BUS_HOST; > + input->open = adc_joystick_open; > + input->close = adc_joystick_close; > + > + ret = adc_joystick_set_axes(dev, joy); > + if (ret) > + return ret; > + > + input_set_drvdata(input, joy); > + ret = input_register_device(input); > + if (ret) { > + dev_err(dev, "Unable to register input device: %d", ret); > + return ret; > + } > + > + joy->buffer = iio_channel_get_all_cb(dev, adc_joystick_handle, joy); > + if (IS_ERR(joy->buffer)) { > + dev_err(dev, "Unable to allocate callback buffer"); > + return PTR_ERR(joy->buffer); > + } > + > + ret = devm_add_action_or_reset(dev, adc_joystick_cleanup, joy->buffer); > + if (ret) > + dev_err(dev, "Unable to add action"); > + > + return ret; > +} > + > +static const struct of_device_id adc_joystick_of_match[] = { > + { .compatible = "adc-joystick", }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, adc_joystick_of_match); > + > +static struct platform_driver adc_joystick_driver = { > + .driver = { > + .name = "adc-joystick", > + .of_match_table = adc_joystick_of_match, > + }, > + .probe = adc_joystick_probe, > +}; > +module_platform_driver(adc_joystick_driver); > + > +MODULE_DESCRIPTION("Input driver for joysticks connected over ADC"); > +MODULE_AUTHOR("Artur Rojek <contact@artur-rojek.eu>"); > +MODULE_LICENSE("GPL"); ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v8 0/2] input: ADC joystick driver & DT bindings 2020-07-19 22:11 [PATCH v8 0/2] input: ADC joystick driver & DT bindings Artur Rojek 2020-07-19 22:11 ` [PATCH v8 1/2] dt-bindings: input: Add docs for ADC driven joystick Artur Rojek 2020-07-19 22:11 ` [PATCH v8 2/2] input: joystick: Add ADC attached joystick driver Artur Rojek @ 2020-07-20 9:57 ` Jonathan Cameron 2 siblings, 0 replies; 6+ messages in thread From: Jonathan Cameron @ 2020-07-20 9:57 UTC (permalink / raw) To: Artur Rojek Cc: Dmitry Torokhov, Rob Herring, Mark Rutland, Paul Cercueil, Andy Shevchenko, Heiko Stuebner, Ezequiel Garcia, linux-input, devicetree, linux-kernel On Mon, 20 Jul 2020 00:11:01 +0200 Artur Rojek <contact@artur-rojek.eu> wrote: > Hi all, > > this series is a continuation of adc-joystick changes split from: > https://lore.kernel.org/linux-iio/20200709152200.10039-1-contact@artur-rojek.eu/ > > Rob, the bindings example in patch 1/2 depends on changes introduced > in another patchset, still to be merged: > https://lore.kernel.org/linux-iio/20200719205307.87385-4-contact@artur-rojek.eu/ > Your scripts will most likely fail to validate this. You have already > reviewed this patch when it was still part of the aforementioned series. I've just taken v9 of the dependency into iio.git as an immutable branch based on 5.8 https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git ib-5.8-jz47xx-ts Thanks, Jonathan > > Cheers, > Artur > > Artur Rojek (2): > dt-bindings: input: Add docs for ADC driven joystick. > input: joystick: Add ADC attached joystick driver. > > .../bindings/input/adc-joystick.yaml | 121 +++++++++ > drivers/input/joystick/Kconfig | 10 + > drivers/input/joystick/Makefile | 1 + > drivers/input/joystick/adc-joystick.c | 253 ++++++++++++++++++ > 4 files changed, 385 insertions(+) > create mode 100644 Documentation/devicetree/bindings/input/adc-joystick.yaml > create mode 100644 drivers/input/joystick/adc-joystick.c > ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-07-20 16:33 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-07-19 22:11 [PATCH v8 0/2] input: ADC joystick driver & DT bindings Artur Rojek 2020-07-19 22:11 ` [PATCH v8 1/2] dt-bindings: input: Add docs for ADC driven joystick Artur Rojek 2020-07-20 16:32 ` Rob Herring 2020-07-19 22:11 ` [PATCH v8 2/2] input: joystick: Add ADC attached joystick driver Artur Rojek 2020-07-20 10:04 ` Jonathan Cameron 2020-07-20 9:57 ` [PATCH v8 0/2] input: ADC joystick driver & DT bindings Jonathan Cameron
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.