[PATCH net-next 1/3] dpaa2-eth: move the mqprio setup into a separate function

[Ioana Ciornei <ioana.ciornei@nxp.com>]

Move the setup done for MQPRIO into a separate function so that
with the addition of another offload we do not crowd
dpaa2_eth_setup_tc(). After this restructuring it's easier to see what
is supported in terms of Qdisc offloading.

Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
---
 .../net/ethernet/freescale/dpaa2/dpaa2-eth.c  | 19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
index d0cc1dc49aaa..18e0c00074ff 100644
--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
+++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c
@@ -2213,17 +2213,13 @@ static int update_xps(struct dpaa2_eth_priv *priv)
 	return err;
 }
 
-static int dpaa2_eth_setup_tc(struct net_device *net_dev,
-			      enum tc_setup_type type, void *type_data)
+static int dpaa2_eth_setup_mqprio(struct net_device *net_dev,
+				  struct tc_mqprio_qopt *mqprio)
 {
 	struct dpaa2_eth_priv *priv = netdev_priv(net_dev);
-	struct tc_mqprio_qopt *mqprio = type_data;
 	u8 num_tc, num_queues;
 	int i;
 
-	if (type != TC_SETUP_QDISC_MQPRIO)
-		return -EOPNOTSUPP;
-
 	mqprio->hw = TC_MQPRIO_HW_OFFLOAD_TCS;
 	num_queues = dpaa2_eth_queue_count(priv);
 	num_tc = mqprio->num_tc;
@@ -2255,6 +2251,17 @@ static int dpaa2_eth_setup_tc(struct net_device *net_dev,
 	return 0;
 }
 
+static int dpaa2_eth_setup_tc(struct net_device *net_dev,
+			      enum tc_setup_type type, void *type_data)
+{
+	switch (type) {
+	case TC_SETUP_QDISC_MQPRIO:
+		return dpaa2_eth_setup_mqprio(net_dev, type_data);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
 static const struct net_device_ops dpaa2_eth_ops = {
 	.ndo_open = dpaa2_eth_open,
 	.ndo_start_xmit = dpaa2_eth_tx,
-- 
2.25.1