All of lore.kernel.org
 help / color / mirror / Atom feed
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: broonie@kernel.org
Cc: vkoul@kernel.org, perex@perex.cz, tiwai@suse.com,
	lgirdwood@gmail.com, alsa-devel@alsa-project.org,
	linux-kernel@vger.kernel.org, ckeepax@opensource.cirrus.com,
	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Subject: [PATCH v2 6/9] ASoC: q6asm: add support to gapless flag in q6asm open
Date: Tue, 21 Jul 2020 17:53:03 +0100	[thread overview]
Message-ID: <20200721165306.29082-7-srinivas.kandagatla@linaro.org> (raw)
In-Reply-To: <20200721165306.29082-1-srinivas.kandagatla@linaro.org>

This patch adds support to gapless flag to q6asm_open_write().

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 sound/soc/qcom/qdsp6/q6asm-dai.c | 4 ++--
 sound/soc/qcom/qdsp6/q6asm.c     | 4 +++-
 sound/soc/qcom/qdsp6/q6asm.h     | 2 +-
 3 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c
index 6b9ceac2ceb2..a493350c8cc2 100644
--- a/sound/soc/qcom/qdsp6/q6asm-dai.c
+++ b/sound/soc/qcom/qdsp6/q6asm-dai.c
@@ -259,7 +259,7 @@ static int q6asm_dai_prepare(struct snd_soc_component *component,
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		ret = q6asm_open_write(prtd->audio_client, prtd->stream_id,
 				       FORMAT_LINEAR_PCM,
-				       0, prtd->bits_per_sample);
+				       0, prtd->bits_per_sample, false);
 	} else if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
 		ret = q6asm_open_read(prtd->audio_client, prtd->stream_id,
 				      FORMAT_LINEAR_PCM,
@@ -686,7 +686,7 @@ static int q6asm_dai_compr_set_params(struct snd_soc_component *component,
 	if (dir == SND_COMPRESS_PLAYBACK) {
 		ret = q6asm_open_write(prtd->audio_client, prtd->stream_id,
 				       params->codec.id, params->codec.profile,
-				       prtd->bits_per_sample);
+				       prtd->bits_per_sample, true);
 
 		if (ret < 0) {
 			dev_err(dev, "q6asm_open_write failed\n");
diff --git a/sound/soc/qcom/qdsp6/q6asm.c b/sound/soc/qcom/qdsp6/q6asm.c
index 14ec7dad5b65..22ac99029e56 100644
--- a/sound/soc/qcom/qdsp6/q6asm.c
+++ b/sound/soc/qcom/qdsp6/q6asm.c
@@ -923,7 +923,7 @@ static int q6asm_ac_send_cmd_sync(struct audio_client *ac, struct apr_pkt *pkt)
  */
 int q6asm_open_write(struct audio_client *ac, uint32_t stream_id,
 		     uint32_t format, u32 codec_profile,
-		     uint16_t bits_per_sample)
+		     uint16_t bits_per_sample, bool is_gapless)
 {
 	struct asm_stream_cmd_open_write_v3 *open;
 	struct apr_pkt *pkt;
@@ -943,6 +943,8 @@ int q6asm_open_write(struct audio_client *ac, uint32_t stream_id,
 	pkt->hdr.opcode = ASM_STREAM_CMD_OPEN_WRITE_V3;
 	open->mode_flags = 0x00;
 	open->mode_flags |= ASM_LEGACY_STREAM_SESSION;
+	if (is_gapless)
+		open->mode_flags |= BIT(ASM_SHIFT_GAPLESS_MODE_FLAG);
 
 	/* source endpoint : matrix */
 	open->sink_endpointype = ASM_END_POINT_DEVICE_MATRIX;
diff --git a/sound/soc/qcom/qdsp6/q6asm.h b/sound/soc/qcom/qdsp6/q6asm.h
index e315f7ff5e54..69513ac1fa55 100644
--- a/sound/soc/qcom/qdsp6/q6asm.h
+++ b/sound/soc/qcom/qdsp6/q6asm.h
@@ -100,7 +100,7 @@ int q6asm_write_async(struct audio_client *ac, uint32_t stream_id, uint32_t len,
 		      uint32_t msw_ts, uint32_t lsw_ts, uint32_t flags);
 int q6asm_open_write(struct audio_client *ac, uint32_t stream_id,
 		     uint32_t format, u32 codec_profile,
-		     uint16_t bits_per_sample);
+		     uint16_t bits_per_sample, bool is_gapless);
 
 int q6asm_open_read(struct audio_client *ac, uint32_t stream_id,
 		    uint32_t format, uint16_t bits_per_sample);
-- 
2.21.0


WARNING: multiple messages have this Message-ID (diff)
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: broonie@kernel.org
Cc: alsa-devel@alsa-project.org, ckeepax@opensource.cirrus.com,
	tiwai@suse.com, lgirdwood@gmail.com,
	linux-kernel@vger.kernel.org, vkoul@kernel.org,
	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Subject: [PATCH v2 6/9] ASoC: q6asm: add support to gapless flag in q6asm open
Date: Tue, 21 Jul 2020 17:53:03 +0100	[thread overview]
Message-ID: <20200721165306.29082-7-srinivas.kandagatla@linaro.org> (raw)
In-Reply-To: <20200721165306.29082-1-srinivas.kandagatla@linaro.org>

This patch adds support to gapless flag to q6asm_open_write().

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
---
 sound/soc/qcom/qdsp6/q6asm-dai.c | 4 ++--
 sound/soc/qcom/qdsp6/q6asm.c     | 4 +++-
 sound/soc/qcom/qdsp6/q6asm.h     | 2 +-
 3 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/sound/soc/qcom/qdsp6/q6asm-dai.c b/sound/soc/qcom/qdsp6/q6asm-dai.c
index 6b9ceac2ceb2..a493350c8cc2 100644
--- a/sound/soc/qcom/qdsp6/q6asm-dai.c
+++ b/sound/soc/qcom/qdsp6/q6asm-dai.c
@@ -259,7 +259,7 @@ static int q6asm_dai_prepare(struct snd_soc_component *component,
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
 		ret = q6asm_open_write(prtd->audio_client, prtd->stream_id,
 				       FORMAT_LINEAR_PCM,
-				       0, prtd->bits_per_sample);
+				       0, prtd->bits_per_sample, false);
 	} else if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
 		ret = q6asm_open_read(prtd->audio_client, prtd->stream_id,
 				      FORMAT_LINEAR_PCM,
@@ -686,7 +686,7 @@ static int q6asm_dai_compr_set_params(struct snd_soc_component *component,
 	if (dir == SND_COMPRESS_PLAYBACK) {
 		ret = q6asm_open_write(prtd->audio_client, prtd->stream_id,
 				       params->codec.id, params->codec.profile,
-				       prtd->bits_per_sample);
+				       prtd->bits_per_sample, true);
 
 		if (ret < 0) {
 			dev_err(dev, "q6asm_open_write failed\n");
diff --git a/sound/soc/qcom/qdsp6/q6asm.c b/sound/soc/qcom/qdsp6/q6asm.c
index 14ec7dad5b65..22ac99029e56 100644
--- a/sound/soc/qcom/qdsp6/q6asm.c
+++ b/sound/soc/qcom/qdsp6/q6asm.c
@@ -923,7 +923,7 @@ static int q6asm_ac_send_cmd_sync(struct audio_client *ac, struct apr_pkt *pkt)
  */
 int q6asm_open_write(struct audio_client *ac, uint32_t stream_id,
 		     uint32_t format, u32 codec_profile,
-		     uint16_t bits_per_sample)
+		     uint16_t bits_per_sample, bool is_gapless)
 {
 	struct asm_stream_cmd_open_write_v3 *open;
 	struct apr_pkt *pkt;
@@ -943,6 +943,8 @@ int q6asm_open_write(struct audio_client *ac, uint32_t stream_id,
 	pkt->hdr.opcode = ASM_STREAM_CMD_OPEN_WRITE_V3;
 	open->mode_flags = 0x00;
 	open->mode_flags |= ASM_LEGACY_STREAM_SESSION;
+	if (is_gapless)
+		open->mode_flags |= BIT(ASM_SHIFT_GAPLESS_MODE_FLAG);
 
 	/* source endpoint : matrix */
 	open->sink_endpointype = ASM_END_POINT_DEVICE_MATRIX;
diff --git a/sound/soc/qcom/qdsp6/q6asm.h b/sound/soc/qcom/qdsp6/q6asm.h
index e315f7ff5e54..69513ac1fa55 100644
--- a/sound/soc/qcom/qdsp6/q6asm.h
+++ b/sound/soc/qcom/qdsp6/q6asm.h
@@ -100,7 +100,7 @@ int q6asm_write_async(struct audio_client *ac, uint32_t stream_id, uint32_t len,
 		      uint32_t msw_ts, uint32_t lsw_ts, uint32_t flags);
 int q6asm_open_write(struct audio_client *ac, uint32_t stream_id,
 		     uint32_t format, u32 codec_profile,
-		     uint16_t bits_per_sample);
+		     uint16_t bits_per_sample, bool is_gapless);
 
 int q6asm_open_read(struct audio_client *ac, uint32_t stream_id,
 		    uint32_t format, uint16_t bits_per_sample);
-- 
2.21.0


  parent reply	other threads:[~2020-07-21 17:03 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-21 16:52 [PATCH v2 0/9] ASoC: qdsp6: add gapless compressed audio support Srinivas Kandagatla
2020-07-21 16:52 ` Srinivas Kandagatla
2020-07-21 16:52 ` [PATCH v2 1/9] ASoC: q6asm: rename misleading session id variable Srinivas Kandagatla
2020-07-21 16:52   ` Srinivas Kandagatla
2020-07-21 16:52 ` [PATCH v2 2/9] ASoC: q6asm: make commands specific to streams Srinivas Kandagatla
2020-07-21 16:52   ` Srinivas Kandagatla
2020-07-21 19:31   ` Pierre-Louis Bossart
2020-07-21 19:31     ` Pierre-Louis Bossart
2020-07-22  8:59     ` Srinivas Kandagatla
2020-07-22  8:59       ` Srinivas Kandagatla
2020-07-21 16:53 ` [PATCH v2 3/9] ASoC: q6asm: use flags directly from q6asm-dai Srinivas Kandagatla
2020-07-21 16:53   ` Srinivas Kandagatla
2020-07-21 16:53 ` [PATCH v2 4/9] ASoC: q6asm: add length to write command token Srinivas Kandagatla
2020-07-21 16:53   ` Srinivas Kandagatla
2020-07-21 16:53 ` [PATCH v2 5/9] ASoC: q6asm: add support to remove intial and trailing silence Srinivas Kandagatla
2020-07-21 16:53   ` Srinivas Kandagatla
2020-07-21 16:53 ` Srinivas Kandagatla [this message]
2020-07-21 16:53   ` [PATCH v2 6/9] ASoC: q6asm: add support to gapless flag in q6asm open Srinivas Kandagatla
2020-07-21 16:53 ` [PATCH v2 7/9] ASoC: q6asm-dai: add next track metadata support Srinivas Kandagatla
2020-07-21 16:53   ` Srinivas Kandagatla
2020-07-21 16:53 ` [PATCH v2 8/9] ASoC: qdsp6-dai: add gapless support Srinivas Kandagatla
2020-07-21 16:53   ` Srinivas Kandagatla
2020-07-21 19:53   ` Pierre-Louis Bossart
2020-07-21 19:53     ` Pierre-Louis Bossart
2020-07-22  9:00     ` Srinivas Kandagatla
2020-07-22  9:00       ` Srinivas Kandagatla
2020-07-22 15:31       ` Pierre-Louis Bossart
2020-07-22 15:31         ` Pierre-Louis Bossart
2020-07-21 16:53 ` [PATCH v2 9/9] ASoC: q6asm-dai: add support to copy callback Srinivas Kandagatla
2020-07-21 16:53   ` Srinivas Kandagatla
2020-07-21 19:54   ` Pierre-Louis Bossart
2020-07-21 19:54     ` Pierre-Louis Bossart

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200721165306.29082-7-srinivas.kandagatla@linaro.org \
    --to=srinivas.kandagatla@linaro.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=ckeepax@opensource.cirrus.com \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.