[igt-dev] [PATCH 1/2] i915/perf: add tests for triggered OA reports

* [igt-dev] [PATCH 1/2] i915/perf: add tests for triggered OA reports
@ 2020-07-22  5:38 Umesh Nerlige Ramappa
  2020-07-22  5:38 ` [igt-dev] [PATCH 2/2] i915/perf: Add tests for mapped OA buffer Umesh Nerlige Ramappa
                   ` (2 more replies)
  0 siblings, 3 replies; 10+ messages in thread
From: Umesh Nerlige Ramappa @ 2020-07-22  5:38 UTC (permalink / raw)
  To: igt-dev

From: Lionel G Landwerlin <lionel.g.landwerlin@intel.com>

By whitelisting a couple of registers we can allow an application
batch to trigger OA reports in the OA buffer by switching back & forth
an inverter on the condition logic.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
---
 tests/i915/perf.c | 254 +++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 252 insertions(+), 2 deletions(-)

diff --git a/tests/i915/perf.c b/tests/i915/perf.c
index 92edc9f1..eb38ea12 100644
--- a/tests/i915/perf.c
+++ b/tests/i915/perf.c
@@ -53,6 +53,8 @@ IGT_TEST_DESCRIPTION("Test the i915 perf metrics streaming interface");
 #define OAREPORT_REASON_SHIFT          19
 #define OAREPORT_REASON_TIMER          (1<<0)
 #define OAREPORT_REASON_INTERNAL       (3<<1)
+#define OAREPORT_REASON_TRIGGER1       (1<<1)
+#define OAREPORT_REASON_TRIGGER2       (1<<2)
 #define OAREPORT_REASON_CTX_SWITCH     (1<<3)
 #define OAREPORT_REASON_GO             (1<<4)
 #define OAREPORT_REASON_CLK_RATIO      (1<<5)
@@ -383,11 +385,17 @@ gen8_read_report_clock_ratios(uint32_t *report,
 	*unslice_freq_mhz = (unslice_freq * 16666) / 1000;
 }
 
+static uint32_t
+gen8_report_reason(const uint32_t *report)
+{
+	return ((report[0] >> OAREPORT_REASON_SHIFT) &
+		OAREPORT_REASON_MASK);
+}
+
 static const char *
 gen8_read_report_reason(const uint32_t *report)
 {
-	uint32_t reason = ((report[0] >> OAREPORT_REASON_SHIFT) &
-			   OAREPORT_REASON_MASK);
+	uint32_t reason = gen8_report_reason(report);
 
 	if (reason & (1<<0))
 		return "timer";
@@ -3118,6 +3126,241 @@ emit_stall_timestamp_and_rpc(struct intel_batchbuffer *batch,
 	emit_report_perf_count(batch, dst, report_dst_offset, report_id);
 }
 
+/* The following register all have the same layout. */
+#define OAREPORTTRIG2 (0x2744)
+#define   OAREPORTTRIG2_INVERT_A_0  (1 << 0)
+#define   OAREPORTTRIG2_INVERT_A_1  (1 << 1)
+#define   OAREPORTTRIG2_INVERT_A_2  (1 << 2)
+#define   OAREPORTTRIG2_INVERT_A_3  (1 << 3)
+#define   OAREPORTTRIG2_INVERT_A_4  (1 << 4)
+#define   OAREPORTTRIG2_INVERT_A_5  (1 << 5)
+#define   OAREPORTTRIG2_INVERT_A_6  (1 << 6)
+#define   OAREPORTTRIG2_INVERT_A_7  (1 << 7)
+#define   OAREPORTTRIG2_INVERT_A_8  (1 << 8)
+#define   OAREPORTTRIG2_INVERT_A_9  (1 << 9)
+#define   OAREPORTTRIG2_INVERT_A_10 (1 << 10)
+#define   OAREPORTTRIG2_INVERT_A_11 (1 << 11)
+#define   OAREPORTTRIG2_INVERT_A_12 (1 << 12)
+#define   OAREPORTTRIG2_INVERT_A_13 (1 << 13)
+#define   OAREPORTTRIG2_INVERT_A_14 (1 << 14)
+#define   OAREPORTTRIG2_INVERT_A_15 (1 << 15)
+#define   OAREPORTTRIG2_INVERT_B_0  (1 << 16)
+#define   OAREPORTTRIG2_INVERT_B_1  (1 << 17)
+#define   OAREPORTTRIG2_INVERT_B_2  (1 << 18)
+#define   OAREPORTTRIG2_INVERT_B_3  (1 << 19)
+#define   OAREPORTTRIG2_INVERT_C_0  (1 << 20)
+#define   OAREPORTTRIG2_INVERT_C_1  (1 << 21)
+#define   OAREPORTTRIG2_INVERT_D_0  (1 << 22)
+#define   OAREPORTTRIG2_THRESHOLD_ENABLE      (1 << 23)
+#define   OAREPORTTRIG2_REPORT_TRIGGER_ENABLE (1 << 31)
+#define OAREPORTTRIG6 (0x2754)
+#define GEN12_OAREPORTTRIG2 (0xd924)
+#define GEN12_OAREPORTTRIG6 (0xd934)
+
+static void
+emit_triggered_oa_report(struct intel_batchbuffer *batch,
+			 uint32_t trigger)
+{
+	/*
+	 * We have 2 trigger registers that each generate a different
+	 * report reason.
+	 */
+	static const uint32_t gen8_triggers[] = {
+		OAREPORTTRIG2,
+		OAREPORTTRIG6,
+	};
+	static const uint32_t gen12_triggers[] = {
+		GEN12_OAREPORTTRIG2,
+		GEN12_OAREPORTTRIG6,
+	};
+	const uint32_t *triggers = intel_gen(devid) >= 12 ? gen12_triggers : gen8_triggers;
+
+	assert(trigger <= 1);
+
+	BEGIN_BATCH(6, 0);
+	OUT_BATCH(MI_LOAD_REGISTER_IMM);
+	OUT_BATCH(triggers[trigger]);
+	OUT_BATCH(OAREPORTTRIG2_INVERT_C_1 |
+		  OAREPORTTRIG2_REPORT_TRIGGER_ENABLE);
+	OUT_BATCH(MI_LOAD_REGISTER_IMM);
+	OUT_BATCH(triggers[trigger]);
+	OUT_BATCH(OAREPORTTRIG2_INVERT_C_1 |
+		  OAREPORTTRIG2_INVERT_D_0 |
+		  OAREPORTTRIG2_REPORT_TRIGGER_ENABLE);
+	ADVANCE_BATCH();
+}
+
+static uint64_t
+rcs_timestmap_reg_read(int fd)
+{
+	struct drm_i915_reg_read rr = {
+		.offset = 0x2358 | I915_REG_READ_8B_WA, /* render ring timestamp */
+	};
+
+	do_ioctl(fd, DRM_IOCTL_I915_REG_READ, &rr);
+
+	return rr.val;
+}
+
+/*
+ * Verify that we can trigger OA reports into the OA buffer using
+ * MI_LRI.
+ */
+static void
+test_triggered_oa_reports(void)
+{
+	int oa_exponent = max_oa_exponent_for_period_lte(1000000);
+	uint64_t properties[] = {
+		DRM_I915_PERF_PROP_CTX_HANDLE, UINT64_MAX, /* updated below */
+
+		/* Note: we have to specify at least one sample property even
+		 * though we aren't interested in samples in this case
+		 */
+		DRM_I915_PERF_PROP_SAMPLE_OA, true,
+
+		/* OA unit configuration */
+		DRM_I915_PERF_PROP_OA_METRICS_SET, test_set->perf_oa_metrics_set,
+		DRM_I915_PERF_PROP_OA_FORMAT, test_set->perf_oa_format,
+		DRM_I915_PERF_PROP_OA_EXPONENT, oa_exponent,
+
+		/* Note: no OA exponent specified in this case */
+	};
+	struct drm_i915_perf_open_param param = {
+		.flags = I915_PERF_FLAG_FD_CLOEXEC,
+		.num_properties = ARRAY_SIZE(properties) / 2,
+		.properties_ptr = to_user_pointer(properties),
+	};
+	struct drm_i915_perf_record_header *header;
+	drm_intel_bufmgr *bufmgr;
+	drm_intel_context *context;
+	struct igt_helper_process child = {};
+	struct intel_batchbuffer *batch;
+	struct igt_buf src[2], dst[2];
+	uint64_t timestamp32_mask = (1ull << 32) - 1;
+	uint64_t timestamps[2];
+	uint32_t buf_size = 16 * 1024 * 1024;
+	uint8_t *buf = malloc(buf_size);
+	uint32_t ctx_id;
+	int width = 800;
+	int height = 600;
+	uint32_t trigger_counts[2] = { 0, };
+	int ret;
+
+	do {
+		igt_fork_helper(&child) {
+			bufmgr = drm_intel_bufmgr_gem_init(drm_fd, 4096);
+			drm_intel_bufmgr_gem_enable_reuse(bufmgr);
+
+			scratch_buf_init(bufmgr, &src[0], width, height, 0xff0000ff);
+			scratch_buf_init(bufmgr, &dst[0], width, height, 0x00ff00ff);
+			scratch_buf_init(bufmgr, &src[1], 2 * width, height, 0xff0000ff);
+			scratch_buf_init(bufmgr, &dst[1], 2 * width, height, 0x00ff00ff);
+
+			batch = intel_batchbuffer_alloc(bufmgr, devid);
+
+			context = drm_intel_gem_context_create(bufmgr);
+			igt_assert(context);
+
+			ret = drm_intel_gem_context_get_id(context, &ctx_id);
+			properties[1] = ctx_id;
+
+
+			timestamps[0] = rcs_timestmap_reg_read(drm_fd);
+
+			stream_fd = __perf_open(drm_fd, &param, false);
+
+			emit_triggered_oa_report(batch, 0);
+
+			render_copy(batch,
+				    context,
+				    &src[0], 0, 0, width, height,
+				    &dst[0], 0, 0);
+
+			emit_triggered_oa_report(batch, 0);
+
+			emit_triggered_oa_report(batch, 1);
+
+			render_copy(batch,
+				    context,
+				    &src[1], 0, 0, 2 * width, height,
+				    &dst[1], 0, 0);
+
+			emit_triggered_oa_report(batch, 1);
+
+			intel_batchbuffer_flush_with_context(batch, context);
+
+			timestamps[1] = rcs_timestmap_reg_read(drm_fd);
+
+			if (timestamps[1] < timestamps[0] ||
+			    (timestamps[1] & timestamp32_mask) < (timestamps[1] & timestamp32_mask)) {
+				igt_debug("Timestamp rollover, trying again\n");
+				exit(EAGAIN);
+			}
+
+			ret = i915_read_reports_until_timestamp(test_set->perf_oa_format,
+								buf, buf_size,
+								timestamps[0] & timestamp32_mask,
+								timestamps[1] & timestamp32_mask);
+
+			for (size_t offset = 0; offset < ret; offset += header->size) {
+				uint32_t *report;
+
+				header = (void *)(buf + offset);
+
+				igt_assert_eq(header->pad, 0); /* Reserved */
+
+				igt_assert_neq(header->type, DRM_I915_PERF_RECORD_OA_BUFFER_LOST);
+
+				if (header->type == DRM_I915_PERF_RECORD_OA_REPORT_LOST)
+					continue;
+
+				/* Currently the only other record type expected is a
+				 * _SAMPLE. Notably this test will need updating if
+				 * i915-perf is extended in the future with additional
+				 * record types.
+				 */
+				igt_assert_eq(header->type, DRM_I915_PERF_RECORD_SAMPLE);
+
+				report = (void *)(header + 1);
+
+				igt_debug("report ts=0x%08x hw_id=0x%08x reason=%s\n",
+					  report[1], report[2],
+					  gen8_read_report_reason(report));
+
+				if (gen8_report_reason(report) & OAREPORT_REASON_TRIGGER1) {
+					igt_assert_eq(trigger_counts[1], 0);
+					trigger_counts[0]++;
+				}
+				if (gen8_report_reason(report) & OAREPORT_REASON_TRIGGER2) {
+					igt_assert_eq(trigger_counts[0], 2);
+					trigger_counts[1]++;
+				}
+			}
+
+			igt_assert_eq(trigger_counts[0], 2);
+			igt_assert_eq(trigger_counts[1], 2);
+
+			for (int i = 0; i < ARRAY_SIZE(src); i++) {
+				drm_intel_bo_unreference(src[i].bo);
+				drm_intel_bo_unreference(dst[i].bo);
+			}
+
+			intel_batchbuffer_free(batch);
+			drm_intel_gem_context_destroy(context);
+			drm_intel_bufmgr_destroy(bufmgr);
+			__perf_close(stream_fd);
+		}
+
+		ret = igt_wait_helper(&child);
+
+		igt_assert(WEXITSTATUS(ret) == EAGAIN ||
+			   WEXITSTATUS(ret) == 0);
+
+	} while (WEXITSTATUS(ret) == EAGAIN);
+
+	free(buf);
+}
+
 /* Tests the INTEL_performance_query use case where an unprivileged process
  * should be able to configure the OA unit for per-context metrics (for a
  * context associated with that process' drm file descriptor) and the counters
@@ -5096,6 +5339,13 @@ igt_main
 	igt_subtest("whitelisted-registers-userspace-config")
 		test_whitelisted_registers_userspace_config();
 
+	igt_describe("Verify that triggered reports work");
+	igt_subtest("triggered-oa-reports") {
+		igt_require(intel_gen(devid) >= 8);
+		igt_require(i915_perf_revision(drm_fd) >= 6);
+		test_triggered_oa_reports();
+	}
+
 	igt_fixture {
 		/* leave sysctl options in their default state... */
 		write_u64_file("/proc/sys/dev/i915/oa_max_sample_rate", 100000);
-- 
2.20.1

_______________________________________________
igt-dev mailing list
igt-dev@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/igt-dev

^ permalink raw reply related	[flat|nested] 10+ messages in thread