From: <cristian.birsan@microchip.com> To: <balbi@kernel.org>, <gregkh@linuxfoundation.org>, <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>, <ludovic.desroches@microchip.com>, <robh+dt@kernel.org>, <mark.rutland@arm.com>, <linux-arm-kernel@lists.infradead.org>, <linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org> Cc: Cristian Birsan <cristian.birsan@microchip.com> Subject: [PATCH v3 3/6] usb: gadget: udc: atmel: simplify endpoint allocation Date: Wed, 22 Jul 2020 16:44:18 +0300 [thread overview] Message-ID: <20200722134421.190741-4-cristian.birsan@microchip.com> (raw) In-Reply-To: <20200722134421.190741-1-cristian.birsan@microchip.com> From: Cristian Birsan <cristian.birsan@microchip.com> Simplify the endpoint allocation and cleanup the code. Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> --- drivers/usb/gadget/udc/atmel_usba_udc.c | 21 ++++++++------------- drivers/usb/gadget/udc/atmel_usba_udc.h | 1 - 2 files changed, 8 insertions(+), 14 deletions(-) diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index ee2b550aa400..f767708598a4 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -1091,8 +1091,6 @@ static struct usb_ep *atmel_usba_match_ep(struct usb_gadget *gadget, USBA_BF(EPT_SIZE, fls(ep->fifo_size - 1) - 3); ep->ept_cfg |= USBA_BF(BK_NUMBER, ep->nr_banks); - - ep->udc->configured_ep++; } return _ep; @@ -1786,7 +1784,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) if (status & USBA_END_OF_RESET) { struct usba_ep *ep0, *ep; - int i, n; + int i; usba_writel(udc, INT_CLR, USBA_END_OF_RESET|USBA_END_OF_RESUME @@ -1834,13 +1832,14 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) "ODD: EP0 configuration is invalid!\n"); /* Preallocate other endpoints */ - n = fifo_mode ? udc->num_ep : udc->configured_ep; - for (i = 1; i < n; i++) { + for (i = 1; i < udc->num_ep; i++) { ep = &udc->usba_ep[i]; - usba_ep_writel(ep, CFG, ep->ept_cfg); - if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) - dev_err(&udc->pdev->dev, - "ODD: EP%d configuration is invalid!\n", i); + if (ep->ep.claimed) { + usba_ep_writel(ep, CFG, ep->ept_cfg); + if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) + dev_err(&udc->pdev->dev, + "ODD: EP%d configuration is invalid!\n", i); + } } } @@ -2025,9 +2024,6 @@ static int atmel_usba_stop(struct usb_gadget *gadget) if (udc->vbus_pin) disable_irq(gpiod_to_irq(udc->vbus_pin)); - if (fifo_mode == 0) - udc->configured_ep = 1; - udc->suspended = false; usba_stop(udc); @@ -2155,7 +2151,6 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, if (fifo_mode == 0) { pp = NULL; udc->num_ep = udc_config->num_ep; - udc->configured_ep = 1; } else { udc->num_ep = usba_config_fifo_table(udc); } diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h index 48e332439ed5..a9bf655eb513 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.h +++ b/drivers/usb/gadget/udc/atmel_usba_udc.h @@ -336,7 +336,6 @@ struct usba_udc { int irq; struct gpio_desc *vbus_pin; int num_ep; - int configured_ep; struct usba_fifo_cfg *fifo_cfg; struct clk *pclk; struct clk *hclk; -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: <cristian.birsan@microchip.com> To: <balbi@kernel.org>, <gregkh@linuxfoundation.org>, <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>, <ludovic.desroches@microchip.com>, <robh+dt@kernel.org>, <mark.rutland@arm.com>, <linux-arm-kernel@lists.infradead.org>, <linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org> Cc: Cristian Birsan <cristian.birsan@microchip.com> Subject: [PATCH v3 3/6] usb: gadget: udc: atmel: simplify endpoint allocation Date: Wed, 22 Jul 2020 16:44:18 +0300 [thread overview] Message-ID: <20200722134421.190741-4-cristian.birsan@microchip.com> (raw) In-Reply-To: <20200722134421.190741-1-cristian.birsan@microchip.com> From: Cristian Birsan <cristian.birsan@microchip.com> Simplify the endpoint allocation and cleanup the code. Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com> --- drivers/usb/gadget/udc/atmel_usba_udc.c | 21 ++++++++------------- drivers/usb/gadget/udc/atmel_usba_udc.h | 1 - 2 files changed, 8 insertions(+), 14 deletions(-) diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index ee2b550aa400..f767708598a4 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -1091,8 +1091,6 @@ static struct usb_ep *atmel_usba_match_ep(struct usb_gadget *gadget, USBA_BF(EPT_SIZE, fls(ep->fifo_size - 1) - 3); ep->ept_cfg |= USBA_BF(BK_NUMBER, ep->nr_banks); - - ep->udc->configured_ep++; } return _ep; @@ -1786,7 +1784,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) if (status & USBA_END_OF_RESET) { struct usba_ep *ep0, *ep; - int i, n; + int i; usba_writel(udc, INT_CLR, USBA_END_OF_RESET|USBA_END_OF_RESUME @@ -1834,13 +1832,14 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) "ODD: EP0 configuration is invalid!\n"); /* Preallocate other endpoints */ - n = fifo_mode ? udc->num_ep : udc->configured_ep; - for (i = 1; i < n; i++) { + for (i = 1; i < udc->num_ep; i++) { ep = &udc->usba_ep[i]; - usba_ep_writel(ep, CFG, ep->ept_cfg); - if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) - dev_err(&udc->pdev->dev, - "ODD: EP%d configuration is invalid!\n", i); + if (ep->ep.claimed) { + usba_ep_writel(ep, CFG, ep->ept_cfg); + if (!(usba_ep_readl(ep, CFG) & USBA_EPT_MAPPED)) + dev_err(&udc->pdev->dev, + "ODD: EP%d configuration is invalid!\n", i); + } } } @@ -2025,9 +2024,6 @@ static int atmel_usba_stop(struct usb_gadget *gadget) if (udc->vbus_pin) disable_irq(gpiod_to_irq(udc->vbus_pin)); - if (fifo_mode == 0) - udc->configured_ep = 1; - udc->suspended = false; usba_stop(udc); @@ -2155,7 +2151,6 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, if (fifo_mode == 0) { pp = NULL; udc->num_ep = udc_config->num_ep; - udc->configured_ep = 1; } else { udc->num_ep = usba_config_fifo_table(udc); } diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.h b/drivers/usb/gadget/udc/atmel_usba_udc.h index 48e332439ed5..a9bf655eb513 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.h +++ b/drivers/usb/gadget/udc/atmel_usba_udc.h @@ -336,7 +336,6 @@ struct usba_udc { int irq; struct gpio_desc *vbus_pin; int num_ep; - int configured_ep; struct usba_fifo_cfg *fifo_cfg; struct clk *pclk; struct clk *hclk; -- 2.25.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-07-22 13:44 UTC|newest] Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-07-22 13:44 [PATCH v3 0/6] usb: gadget: udc: atmel: add usb device support for SAM9x60 SoC cristian.birsan 2020-07-22 13:44 ` cristian.birsan 2020-07-22 13:44 ` [PATCH v3 1/6] usb: gadget: udc: atmel: use of_find_matching_node_and_match cristian.birsan 2020-07-22 13:44 ` cristian.birsan 2020-07-22 14:43 ` Claudiu.Beznea 2020-07-22 14:43 ` Claudiu.Beznea 2020-07-23 16:28 ` Claudiu.Beznea 2020-07-23 16:28 ` Claudiu.Beznea 2020-07-23 16:33 ` Cristian.Birsan 2020-07-23 16:33 ` Cristian.Birsan 2020-07-22 13:44 ` [PATCH v3 2/6] dt-bindings: usb: atmel: Update DT bindings documentation for sam9x60 cristian.birsan 2020-07-22 13:44 ` cristian.birsan 2020-07-22 13:44 ` cristian.birsan [this message] 2020-07-22 13:44 ` [PATCH v3 3/6] usb: gadget: udc: atmel: simplify endpoint allocation cristian.birsan 2020-07-22 13:44 ` [PATCH v3 4/6] usb: gadget: udc: atmel: use 1 bank endpoints for control transfers cristian.birsan 2020-07-22 13:44 ` cristian.birsan 2020-07-22 13:44 ` [PATCH v3 5/6] usb: gadget: udc: atmel: update endpoint allocation for sam9x60 cristian.birsan 2020-07-22 13:44 ` cristian.birsan 2020-07-22 13:44 ` [PATCH v3 6/6] ARM: dts: at91: sam9x60ek: enable usb device cristian.birsan 2020-07-22 13:44 ` cristian.birsan
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200722134421.190741-4-cristian.birsan@microchip.com \ --to=cristian.birsan@microchip.com \ --cc=alexandre.belloni@bootlin.com \ --cc=balbi@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=gregkh@linuxfoundation.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-usb@vger.kernel.org \ --cc=ludovic.desroches@microchip.com \ --cc=mark.rutland@arm.com \ --cc=nicolas.ferre@microchip.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.