All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Robinson <pbrobinson@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH 8/8] Initial Pine64 Pinephone support
Date: Wed, 22 Jul 2020 15:18:40 +0100	[thread overview]
Message-ID: <20200722141840.143379-9-pbrobinson@gmail.com> (raw)
In-Reply-To: <20200722141840.143379-1-pbrobinson@gmail.com>

The Pine64 Pinephone is a smartphone based on the AllWinner A64 SoC.
It has the following features:
* 2GB LPDDR3 SDRAM
* 5.95 inch 1440x720 HD IPS capacitive touchscreen
* 16GB eMMC, mSD slot
* Quectel EG25 LTE Modem
* Realtek RTL8723CS WiFi/BT
* Front and read cameras
* Accelerometer, gyro, proximity, ambient light, compass sensors
* A USB Type-C, USB Host, DisplayPort alt mode output, 15W 5V 3A Quick Charge, follows USB PD specification

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
 arch/arm/Kconfig            |  2 +-
 configs/pinephone_defconfig | 38 +++++++++++++++++++++++++++++++++++++
 2 files changed, 39 insertions(+), 1 deletion(-)
 create mode 100644 configs/pinephone_defconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e16fe03887..636ba26938 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1004,7 +1004,7 @@ config ARCH_SUNXI
 	bool "Support sunxi (Allwinner) SoCs"
 	select BINMAN
 	select CMD_GPIO
-	select CMD_MMC if MMC
+select CMD_MMC if MMC
 	select CMD_USB if DISTRO_DEFAULTS
 	select CLK
 	select DM
diff --git a/configs/pinephone_defconfig b/configs/pinephone_defconfig
new file mode 100644
index 0000000000..d5750aa954
--- /dev/null
+++ b/configs/pinephone_defconfig
@@ -0,0 +1,38 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SPL=y
+CONFIG_MACH_SUN50I=y
+CONFIG_SUNXI_DRAM_LPDDR3_STOCK=y
+CONFIG_DRAM_CLK=552
+CONFIG_DRAM_ZQ=3881949
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_R_I2C_ENABLE=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+# CONFIG_SPL_SPI_SUNXI is not set
+# CONFIG_SPL_DOS_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pinephone-1.1"
+CONFIG_OF_LIST="sun50i-a64-pinephone-1.1 sun50i-a64-pinephone-1.0"
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_PWM=y
+CONFIG_PWM_SUNXI=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+# CONFIG_CMD_MII is not set
+# CONFIG_CMD_NFS is not set
+# CONFIG_DM_ETH is not set
+# CONFIG_PHY is not set
+# CONFIG_PHY_GIGE is not set
+# CONFIG_SUN8I_EMAC is not set
+# CONFIG_PHY_REALTEK is not set
+# CONFIG_CMD_SF is not set
+# CONFIG_SPI is not set
+# CONFIG_DM_SPI is not set
+# CONFIG_SPI_FLASH is not set
+# CONFIG_SPI_MEM is not set
+# CONFIG_DM_SPI_FLASH is not set
-- 
2.26.2

  parent reply	other threads:[~2020-07-22 14:18 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-22 14:18 Initial support for the Pine64 Pinephone Peter Robinson
2020-07-22 14:18 ` [PATCH 1/8] dt-bindings: clk: sync sun50i-a64-ccu.h to linux 5.8-rc1 Peter Robinson
2020-07-22 14:18 ` [PATCH 2/8] dt-bindings: leds: sync leds common.h to linux from 5.8-rc1 Peter Robinson
2020-07-22 14:18 ` [PATCH 3/8] dt-bindings: clk/reset: sync updated bindings for Allwinner DE2 display engine Peter Robinson
2020-07-22 14:18 ` [PATCH 4/8] arm: dts: sync axp803.dtsi from linux 5.8-rc1 Peter Robinson
2020-07-22 14:18 ` [PATCH 5/8] arm: dts: Add new sun50i-a64-cpu-opp.dtsi from Linux 5.8-rc1 Peter Robinson
2020-07-22 14:18 ` [PATCH 6/8] arm: dts: Sync the sun50i-a64.dtsi " Peter Robinson
2020-07-22 23:14   ` André Przywara
2020-07-26 10:17     ` Peter Robinson
2020-07-27 13:16       ` Heinrich Schuchardt
2020-07-29  0:30         ` André Przywara
2020-07-22 14:18 ` [PATCH 7/8] arm64: dts: allwinner: Add initial support for Pine64 PinePhone Peter Robinson
2020-07-22 14:18 ` Peter Robinson [this message]
2020-07-27 13:30   ` [PATCH 8/8] Initial Pine64 Pinephone support Maxime Ripard
2020-07-27 13:49     ` Peter Robinson
2020-07-27 20:08       ` André Przywara
2020-07-27 20:43         ` Tom Rini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200722141840.143379-9-pbrobinson@gmail.com \
    --to=pbrobinson@gmail.com \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.