[PATCH v2 0/8] Hirschmann Hellcreek DSA driver

From: Kurt Kanzenbach <kurt@linutronix.de>
To: Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>,
	Jakub Kicinski <kuba@kernel.org>,
	netdev@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	devicetree@vger.kernel.org,
	Sebastian Andrzej Siewior <bigeasy@linutronix.de>,
	Richard Cochran <richardcochran@gmail.com>,
	Kamil Alkhouri <kamil.alkhouri@hs-offenburg.de>,
	ilias.apalodimas@linaro.org, Vladimir Oltean <olteanv@gmail.com>,
	Kurt Kanzenbach <kurt@linutronix.de>
Subject: [PATCH v2 0/8] Hirschmann Hellcreek DSA driver
Date: Thu, 23 Jul 2020 10:17:06 +0200	[thread overview]
Message-ID: <20200723081714.16005-1-kurt@linutronix.de> (raw)

Hi,

this series adds a DSA driver for the Hirschmann Hellcreek TSN switch
IP. Characteristics of that IP:

 * Full duplex Ethernet interface at 100/1000 Mbps on three ports
 * IEEE 802.1Q-compliant Ethernet Switch
 * IEEE 802.1Qbv Time-Aware scheduling support
 * IEEE 1588 and IEEE 802.1AS support

That IP is used e.g. in

 https://www.arrow.com/en/campaigns/arrow-kairos

Due to the hardware setup the switch driver is implemented using DSA. A special
tagging protocol is leveraged. Furthermore, this driver supports PTP, hardware
timestamping and TAPRIO offloading.

This work is part of the AccessTSN project: https://www.accesstsn.com/

The previous versions can be found here:

 * https://lkml.kernel.org/netdev/20200618064029.32168-1-kurt@linutronix.de/
 * https://lkml.kernel.org/netdev/20200710113611.3398-1-kurt@linutronix.de/

This series depends on:

 * https://lkml.kernel.org/netdev/20200723074946.14253-1-kurt@linutronix.de/

Changes since v1:

 * Code simplifications (Florian Fainelli, Vladimir Oltean)
 * Fix issues with hellcreek.yaml bindings (Florian Fainelli)
 * Clear reserved field in ptp v2 event messages (Richard Cochran)
 * Make use of generic ptp parsing function (Richard Cochran, Vladimir Oltean)
 * Fix Kconfig (Florian Fainelli)
 * Add tags (Florian Fainelli, Rob Herring, Richard Cochran) 

I didn't change the bridge/tagging setup, as I didn't find a better way to do it.

Kamil Alkhouri (2):
  net: dsa: hellcreek: Add PTP clock support
  net: dsa: hellcreek: Add support for hardware timestamping

Kurt Kanzenbach (6):
  net: dsa: Add tag handling for Hirschmann Hellcreek switches
  net: dsa: Add DSA driver for Hirschmann Hellcreek switches
  net: dsa: hellcreek: Add TAPRIO offloading support
  net: dsa: hellcreek: Add PTP status LEDs
  dt-bindings: Add vendor prefix for Hirschmann
  dt-bindings: net: dsa: Add documentation for Hellcreek switches

 .../bindings/net/dsa/hellcreek.yaml           |  126 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |    2 +
 drivers/net/dsa/Kconfig                       |    2 +
 drivers/net/dsa/Makefile                      |    1 +
 drivers/net/dsa/hirschmann/Kconfig            |   10 +
 drivers/net/dsa/hirschmann/Makefile           |    5 +
 drivers/net/dsa/hirschmann/hellcreek.c        | 1551 +++++++++++++++++
 drivers/net/dsa/hirschmann/hellcreek.h        |  301 ++++
 .../net/dsa/hirschmann/hellcreek_hwtstamp.c   |  479 +++++
 .../net/dsa/hirschmann/hellcreek_hwtstamp.h   |   58 +
 drivers/net/dsa/hirschmann/hellcreek_ptp.c    |  452 +++++
 drivers/net/dsa/hirschmann/hellcreek_ptp.h    |   76 +
 include/net/dsa.h                             |    2 +
 net/dsa/Kconfig                               |    6 +
 net/dsa/Makefile                              |    1 +
 net/dsa/tag_hellcreek.c                       |  101 ++
 16 files changed, 3173 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/dsa/hellcreek.yaml
 create mode 100644 drivers/net/dsa/hirschmann/Kconfig
 create mode 100644 drivers/net/dsa/hirschmann/Makefile
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek.c
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek.h
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek_hwtstamp.c
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek_hwtstamp.h
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek_ptp.c
 create mode 100644 drivers/net/dsa/hirschmann/hellcreek_ptp.h
 create mode 100644 net/dsa/tag_hellcreek.c

-- 
2.20.1