All of lore.kernel.org
 help / color / mirror / Atom feed
From: Larry Finger <Larry.Finger@lwfinger.net>
To: kvalo@codeaurora.org
Cc: linux-wireless@vger.kernel.org, Larry Finger <Larry.Finger@lwfinger.net>
Subject: [PATCH v2 13/15] rtlwifi: rtl8723-common: Rename RT_TRACE to rtl_dbg
Date: Thu, 23 Jul 2020 15:42:42 -0500	[thread overview]
Message-ID: <20200723204244.24457-14-Larry.Finger@lwfinger.net> (raw)
In-Reply-To: <20200723204244.24457-1-Larry.Finger@lwfinger.net>

Change the misleading macro name to one that is more descriptive for
rtl8723-common. Changes suggested by ckeckpatch.pl have been made.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
---
v2 - rtl_dbg is used rather than RTL_DEBUG
---
 .../realtek/rtlwifi/rtl8723com/fw_common.c    | 22 ++++++------
 .../realtek/rtlwifi/rtl8723com/phy_common.c   | 36 +++++++++----------
 2 files changed, 29 insertions(+), 29 deletions(-)

diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c
index 37036e653e56..36c00b89ccae 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723com/fw_common.c
@@ -41,7 +41,7 @@ void rtl8723_write_fw(struct ieee80211_hw *hw,
 	u32 page_nums, remain_size;
 	u32 page, offset;
 
-	RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE, "FW size is %d bytes,\n", size);
+	rtl_dbg(rtlpriv, COMP_FW, DBG_TRACE, "FW size is %d bytes,\n", size);
 
 	rtl_fill_dummy(bufferptr, &size);
 
@@ -63,7 +63,7 @@ void rtl8723_write_fw(struct ieee80211_hw *hw,
 		page = page_nums;
 		rtl_fw_page_write(hw, page, (bufferptr + offset), remain_size);
 	}
-	RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE, "FW write done.\n");
+	rtl_dbg(rtlpriv, COMP_FW, DBG_TRACE, "FW write done.\n");
 }
 EXPORT_SYMBOL_GPL(rtl8723_write_fw);
 
@@ -109,8 +109,8 @@ void rtl8723be_firmware_selfreset(struct ieee80211_hw *hw)
 	u1b_tmp = rtl_read_byte(rtlpriv, REG_SYS_FUNC_EN + 1);
 	rtl_write_byte(rtlpriv, REG_SYS_FUNC_EN + 1, (u1b_tmp | BIT(2)));
 
-	RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
-		 "  _8051Reset8723be(): 8051 reset success .\n");
+	rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD,
+		"_8051Reset8723be(): 8051 reset success .\n");
 }
 EXPORT_SYMBOL_GPL(rtl8723be_firmware_selfreset);
 
@@ -143,9 +143,9 @@ int rtl8723_fw_free_to_go(struct ieee80211_hw *hw, bool is_8723be,
 	do {
 		value32 = rtl_read_dword(rtlpriv, REG_MCUFWDL);
 		if (value32 & WINTINI_RDY) {
-			RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE,
-				 "Polling FW ready success!! REG_MCUFWDL:0x%08x .\n",
-				 value32);
+			rtl_dbg(rtlpriv, COMP_FW, DBG_TRACE,
+				"Polling FW ready success!! REG_MCUFWDL:0x%08x .\n",
+				value32);
 			err = 0;
 			goto exit;
 		}
@@ -188,10 +188,10 @@ int rtl8723_download_fw(struct ieee80211_hw *hw,
 	else
 		max_page = 8;
 	if (rtlpriv->cfg->ops->is_fw_header(pfwheader)) {
-		RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD,
-			 "Firmware Version(%d), Signature(%#x), Size(%d)\n",
-			 pfwheader->version, pfwheader->signature,
-			 (int)sizeof(struct rtlwifi_firmware_header));
+		rtl_dbg(rtlpriv, COMP_FW, DBG_LOUD,
+			"Firmware Version(%d), Signature(%#x), Size(%d)\n",
+			pfwheader->version, pfwheader->signature,
+			(int)sizeof(struct rtlwifi_firmware_header));
 
 		pfwdata = pfwdata + sizeof(struct rtlwifi_firmware_header);
 		fwsize = fwsize - sizeof(struct rtlwifi_firmware_header);
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723com/phy_common.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723com/phy_common.c
index debecc623a01..097f21f6d35b 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723com/phy_common.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723com/phy_common.c
@@ -14,15 +14,15 @@ u32 rtl8723_phy_query_bb_reg(struct ieee80211_hw *hw,
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	u32 returnvalue, originalvalue, bitshift;
 
-	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
-		 "regaddr(%#x), bitmask(%#x)\n", regaddr, bitmask);
+	rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE,
+		"regaddr(%#x), bitmask(%#x)\n", regaddr, bitmask);
 	originalvalue = rtl_read_dword(rtlpriv, regaddr);
 	bitshift = rtl8723_phy_calculate_bit_shift(bitmask);
 	returnvalue = (originalvalue & bitmask) >> bitshift;
 
-	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
-		 "BBR MASK=0x%x Addr[0x%x]=0x%x\n", bitmask,
-		 regaddr, originalvalue);
+	rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE,
+		"BBR MASK=0x%x Addr[0x%x]=0x%x\n", bitmask,
+		regaddr, originalvalue);
 	return returnvalue;
 }
 EXPORT_SYMBOL_GPL(rtl8723_phy_query_bb_reg);
@@ -33,9 +33,9 @@ void rtl8723_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr,
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	u32 originalvalue, bitshift;
 
-	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
-		 "regaddr(%#x), bitmask(%#x), data(%#x)\n", regaddr, bitmask,
-		 data);
+	rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE,
+		"regaddr(%#x), bitmask(%#x), data(%#x)\n", regaddr, bitmask,
+		data);
 
 	if (bitmask != MASKDWORD) {
 		originalvalue = rtl_read_dword(rtlpriv, regaddr);
@@ -45,9 +45,9 @@ void rtl8723_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr,
 
 	rtl_write_dword(rtlpriv, regaddr, data);
 
-	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
-		 "regaddr(%#x), bitmask(%#x), data(%#x)\n",
-		 regaddr, bitmask, data);
+	rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE,
+		"regaddr(%#x), bitmask(%#x), data(%#x)\n",
+		regaddr, bitmask, data);
 }
 EXPORT_SYMBOL_GPL(rtl8723_phy_set_bb_reg);
 
@@ -105,9 +105,9 @@ u32 rtl8723_phy_rf_serial_read(struct ieee80211_hw *hw,
 	else
 		retvalue = rtl_get_bbreg(hw, pphyreg->rf_rb,
 					 BLSSIREADBACKDATA);
-	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
-		 "RFR-%d Addr[0x%x]=0x%x\n",
-		 rfpath, pphyreg->rf_rb, retvalue);
+	rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE,
+		"RFR-%d Addr[0x%x]=0x%x\n",
+		rfpath, pphyreg->rf_rb, retvalue);
 	return retvalue;
 }
 EXPORT_SYMBOL_GPL(rtl8723_phy_rf_serial_read);
@@ -130,10 +130,10 @@ void rtl8723_phy_rf_serial_write(struct ieee80211_hw *hw,
 	newoffset = offset;
 	data_and_addr = ((newoffset << 20) | (data & 0x000fffff)) & 0x0fffffff;
 	rtl_set_bbreg(hw, pphyreg->rf3wire_offset, MASKDWORD, data_and_addr);
-	RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
-		 "RFW-%d Addr[0x%x]=0x%x\n",
-		 rfpath, pphyreg->rf3wire_offset,
-		 data_and_addr);
+	rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE,
+		"RFW-%d Addr[0x%x]=0x%x\n",
+		rfpath, pphyreg->rf3wire_offset,
+		data_and_addr);
 }
 EXPORT_SYMBOL_GPL(rtl8723_phy_rf_serial_write);
 
-- 
2.27.0


  parent reply	other threads:[~2020-07-23 20:43 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-23 20:42 [PATCH v2 00/15] rtlwifi: Change RT_TRACE into rtl_dbg for all drivers Larry Finger
2020-07-23 20:42 ` [PATCH v2 01/15] rtlwifi: Start changing RT_TRACE into rtl_dbg Larry Finger
2020-08-31 15:27   ` Kalle Valo
2020-07-23 20:42 ` [PATCH v2 02/15] rtlwifi: Replace RT_TRACE with rtl_dbg Larry Finger
2020-07-23 20:42 ` [PATCH v2 03/15] rtlwifi: btcoexist: " Larry Finger
2020-07-23 20:42 ` [PATCH v2 04/15] rtlwifi: rtl8188ee: Rename RT_TRACE to rtl_dbg Larry Finger
2020-07-23 20:42 ` [PATCH v2 05/15] rtlwifi: rtl8192-common: " Larry Finger
2020-07-23 20:42 ` [PATCH v2 06/15] rtlwifi: rtl8192ce: " Larry Finger
2020-07-23 20:42 ` [PATCH v2 07/15] rtlwifi: rtl8192cu: " Larry Finger
2020-07-23 20:42 ` [PATCH v2 08/15] rtlwifi: rtl8192de: " Larry Finger
2020-07-23 20:42 ` [PATCH v2 09/15] rtlwifi: rtl8192ee: " Larry Finger
2020-07-23 20:42 ` [PATCH v2 10/15] rtlwifi: rtl8192se " Larry Finger
2020-07-23 20:42 ` [PATCH v2 11/15] rtlwifi: rtl8723ae " Larry Finger
2020-07-23 20:42 ` [PATCH v2 12/15] rtlwifi: rtl8723be " Larry Finger
2020-07-23 20:42 ` Larry Finger [this message]
2020-07-23 20:42 ` [PATCH v2 14/15] rtlwifi: rtl8821ae: " Larry Finger
2020-07-23 20:42 ` [PATCH v2 15/15] rtlwifi: Remove temporary definition of RT_TRACE Larry Finger
2020-07-24  6:34   ` kernel test robot
2020-07-24  6:34     ` kernel test robot
2020-07-24  9:43   ` kernel test robot
2020-07-24  9:43     ` kernel test robot
2020-08-27  9:42   ` Kalle Valo
     [not found]   ` <20200827094217.72A9BC433CB@smtp.codeaurora.org>
2020-08-27 18:31     ` Larry Finger
2020-08-28 12:34       ` Kalle Valo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200723204244.24457-14-Larry.Finger@lwfinger.net \
    --to=larry.finger@lwfinger.net \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.