From: Amelie Delaunay <amelie.delaunay@st.com> To: Minas Harutyunyan <hminas@synopsys.com>, Felipe Balbi <balbi@kernel.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Rob Herring <robh+dt@kernel.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@st.com> Cc: <linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-stm32@st-md-mailman.stormreply.com>, Fabrice Gasnier <fabrice.gasnier@st.com>, Amelie Delaunay <amelie.delaunay@st.com>, Martin Blumenstingl <martin.blumenstingl@googlemail.com> Subject: [PATCH v4 3/3] usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15 SoCs Date: Mon, 27 Jul 2020 11:23:46 +0200 [thread overview] Message-ID: <20200727092346.19780-4-amelie.delaunay@st.com> (raw) In-Reply-To: <20200727092346.19780-1-amelie.delaunay@st.com> If usb-role-switch is present in the device tree, it means that ID and Vbus signals are not connected to the OTG controller but to an external component (GPIOs, Type-C controller). In this configuration, usb role switch is used to force valid sessions on STM32MP15 SoCs. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> --- No changes in v4. --- drivers/usb/dwc2/params.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index a3611cdd1dea..65f8596f6795 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -183,9 +183,11 @@ static void dwc2_set_stm32mp15_fsotg_params(struct dwc2_hsotg *hsotg) static void dwc2_set_stm32mp15_hsotg_params(struct dwc2_hsotg *hsotg) { struct dwc2_core_params *p = &hsotg->params; + struct device_node *np = hsotg->dev->of_node; p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE; - p->activate_stm_id_vb_detection = true; + p->activate_stm_id_vb_detection = + !of_property_read_bool(np, "usb-role-switch"); p->host_rx_fifo_size = 440; p->host_nperio_tx_fifo_size = 256; p->host_perio_tx_fifo_size = 256; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Amelie Delaunay <amelie.delaunay@st.com> To: Minas Harutyunyan <hminas@synopsys.com>, Felipe Balbi <balbi@kernel.org>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Rob Herring <robh+dt@kernel.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@st.com> Cc: devicetree@vger.kernel.org, Amelie Delaunay <amelie.delaunay@st.com>, Martin Blumenstingl <martin.blumenstingl@googlemail.com>, linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org, Fabrice Gasnier <fabrice.gasnier@st.com>, linux-stm32@st-md-mailman.stormreply.com, linux-arm-kernel@lists.infradead.org Subject: [PATCH v4 3/3] usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15 SoCs Date: Mon, 27 Jul 2020 11:23:46 +0200 [thread overview] Message-ID: <20200727092346.19780-4-amelie.delaunay@st.com> (raw) In-Reply-To: <20200727092346.19780-1-amelie.delaunay@st.com> If usb-role-switch is present in the device tree, it means that ID and Vbus signals are not connected to the OTG controller but to an external component (GPIOs, Type-C controller). In this configuration, usb role switch is used to force valid sessions on STM32MP15 SoCs. Acked-by: Minas Harutyunyan <hminas@synopsys.com> Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> --- No changes in v4. --- drivers/usb/dwc2/params.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index a3611cdd1dea..65f8596f6795 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -183,9 +183,11 @@ static void dwc2_set_stm32mp15_fsotg_params(struct dwc2_hsotg *hsotg) static void dwc2_set_stm32mp15_hsotg_params(struct dwc2_hsotg *hsotg) { struct dwc2_core_params *p = &hsotg->params; + struct device_node *np = hsotg->dev->of_node; p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE; - p->activate_stm_id_vb_detection = true; + p->activate_stm_id_vb_detection = + !of_property_read_bool(np, "usb-role-switch"); p->host_rx_fifo_size = 440; p->host_nperio_tx_fifo_size = 256; p->host_perio_tx_fifo_size = 256; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-07-27 9:24 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-07-27 9:23 [PATCH v4 0/3] Add USB role switch support to DWC2 Amelie Delaunay 2020-07-27 9:23 ` Amelie Delaunay 2020-07-27 9:23 ` [PATCH v4 1/3] dt-bindings: usb: dwc2: add optional usb-role-switch property Amelie Delaunay 2020-07-27 9:23 ` Amelie Delaunay 2020-07-27 17:47 ` Martin Blumenstingl 2020-07-27 17:47 ` Martin Blumenstingl 2020-07-27 9:23 ` [PATCH v4 2/3] usb: dwc2: override PHY input signals with usb role switch support Amelie Delaunay 2020-07-27 9:23 ` Amelie Delaunay 2020-07-27 17:55 ` Martin Blumenstingl 2020-07-27 17:55 ` Martin Blumenstingl 2020-07-27 9:23 ` Amelie Delaunay [this message] 2020-07-27 9:23 ` [PATCH v4 3/3] usb: dwc2: don't use ID/Vbus detection if usb-role-switch on STM32MP15 SoCs Amelie Delaunay 2020-07-27 17:49 ` Martin Blumenstingl 2020-07-27 17:49 ` Martin Blumenstingl 2020-07-27 19:44 ` Andy Shevchenko 2020-07-27 19:44 ` Andy Shevchenko 2020-07-28 7:27 ` Amelie DELAUNAY 2020-07-28 7:27 ` Amelie DELAUNAY
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200727092346.19780-4-amelie.delaunay@st.com \ --to=amelie.delaunay@st.com \ --cc=alexandre.torgue@st.com \ --cc=balbi@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=fabrice.gasnier@st.com \ --cc=gregkh@linuxfoundation.org \ --cc=hminas@synopsys.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-stm32@st-md-mailman.stormreply.com \ --cc=linux-usb@vger.kernel.org \ --cc=martin.blumenstingl@googlemail.com \ --cc=mcoquelin.stm32@gmail.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.