[PATCH v2 00/18] arm: mach-k3: Initial support for Texas Instrument's J7200 Platform

[PATCH v2 00/18] arm: mach-k3: Initial support for Texas Instrument's J7200 Platform

[Lokesh Vutla]

This series adds initial support for latest new SoC, J7200, from Texas Instruments.

The J7200 SoC is a part of the K3 Multicore SoC architecture platform.
It is targeted for for automotive gateway, vehicle compute systems,
Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications.
The SoC aims to meet the complex processing needs of modern embedded products.

See J7200 Technical Reference Manual (SPRUIU1, June 2020)
for further details: https://www.ti.com/lit/pdf/spruiu1

Changes since v1:
- Updated compatible for sdhci
- Enabled CONFIG_OF_BOARD_SETUP for fixuping up msmc dt node.
- Split R5 dts and A72 dts

Dave Gerlach (1):
  arm: dts: k3-j7200: Add R5 specific dts support

Jean-Jacques Hiblot (1):
  arm: mach-k3: Fix platform hang when SPL_MULTI_DTB_FIT is not enabled

Lokesh Vutla (15):
  board: ti: board_detect: Add stub functions for EEPROM detection apis
  board: ti: j721e: Probe eeprom only when CONFIG_TI_I2C_BOARD_DETECT is
    defined
  arm: mach-k3: Move mmr_unlock to a common location
  arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image
  arm: mach-k3: j721e: Add detection for j721e
  arm: mach-k3: j721e: Fix unlocking control module registers
  arm: mach-k3: j7200: Add support for SOC detection
  arm: mach-k3: j7200: Add support for storing extended boot info from
    ROM
  arm: mach-k3: j7200: Detect if ROM has already loaded sysfw
  board: ti: j7200: Introduce support for j7200 build targets
  board: ti: j7200: Add board detection support for j7200
  ram: k3-j721e: Relax version checks for memory controller
  arm: dts: k3-j7200: Add dts support
  configs: j7200_evm_r5: Add initial support
  configs: j7200_evm_a72: Add Initial support

Suman Anna (1):
  board: ti: j721e: Update fdt fixup logic for interconnect nodes

 arch/arm/dts/Makefile                         |    4 +-
 .../k3-j7200-common-proc-board-u-boot.dtsi    |   92 +
 arch/arm/dts/k3-j7200-common-proc-board.dts   |   94 +
 arch/arm/dts/k3-j7200-ddr-evm-lp4-1600.dtsi   | 2195 +++++++++++++++++
 arch/arm/dts/k3-j7200-main.dtsi               |  313 +++
 arch/arm/dts/k3-j7200-mcu-wakeup.dtsi         |  117 +
 .../arm/dts/k3-j7200-r5-common-proc-board.dts |  199 ++
 arch/arm/dts/k3-j7200-som-p0.dtsi             |   29 +
 arch/arm/dts/k3-j7200.dtsi                    |  175 ++
 arch/arm/mach-k3/am6_init.c                   |   12 +-
 arch/arm/mach-k3/common.c                     |   38 +
 arch/arm/mach-k3/common.h                     |    4 +
 arch/arm/mach-k3/config.mk                    |    8 +-
 arch/arm/mach-k3/include/mach/hardware.h      |    7 +
 .../arm/mach-k3/include/mach/j721e_hardware.h |    3 +
 arch/arm/mach-k3/include/mach/sys_proto.h     |    3 +
 arch/arm/mach-k3/include/mach/sysfw-loader.h  |    4 +-
 arch/arm/mach-k3/j721e_init.c                 |   30 +-
 arch/arm/mach-k3/sysfw-loader.c               |   56 +-
 board/ti/common/board_detect.h                |   13 +
 board/ti/j721e/Kconfig                        |   53 +
 board/ti/j721e/evm.c                          |   25 +-
 configs/j7200_evm_a72_defconfig               |  172 ++
 configs/j7200_evm_r5_defconfig                |  126 +
 drivers/ram/k3-j721e/lpddr4.c                 |   16 +-
 25 files changed, 3719 insertions(+), 69 deletions(-)
 create mode 100644 arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
 create mode 100644 arch/arm/dts/k3-j7200-common-proc-board.dts
 create mode 100644 arch/arm/dts/k3-j7200-ddr-evm-lp4-1600.dtsi
 create mode 100644 arch/arm/dts/k3-j7200-main.dtsi
 create mode 100644 arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
 create mode 100644 arch/arm/dts/k3-j7200-r5-common-proc-board.dts
 create mode 100644 arch/arm/dts/k3-j7200-som-p0.dtsi
 create mode 100644 arch/arm/dts/k3-j7200.dtsi
 create mode 100644 configs/j7200_evm_a72_defconfig
 create mode 100644 configs/j7200_evm_r5_defconfig

-- 
2.27.0

[PATCH v2 01/18] board: ti: board_detect: Add stub functions for EEPROM detection apis

[Lokesh Vutla]

Current usage of eeprom apis produce a build failure when
CONFIG_TI_I2C_BOARD_DETECT is not defined. Add stub function for these
apis to avoid build failures.

Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 board/ti/common/board_detect.h | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/board/ti/common/board_detect.h b/board/ti/common/board_detect.h
index 9f75b5c004..de7cb52dfc 100644
--- a/board/ti/common/board_detect.h
+++ b/board/ti/common/board_detect.h
@@ -311,6 +311,7 @@ int __maybe_unused ti_i2c_eeprom_am6_get(int bus_addr, int dev_addr,
  */
 int __maybe_unused ti_i2c_eeprom_am6_get_base(int bus_addr, int dev_addr);
 
+#ifdef CONFIG_TI_I2C_BOARD_DETECT
 /**
  * board_ti_is() - Board detection logic for TI EVMs
  * @name_tag:	Tag used in eeprom for the board
@@ -454,5 +455,17 @@ bool board_ti_was_eeprom_read(void);
  * Return: 0 if all went fine, else return error.
  */
 int ti_i2c_eeprom_am_set(const char *name, const char *rev);
+#else
+static inline bool board_ti_is(char *name_tag) { return false; };
+static inline bool board_ti_k3_is(char *name_tag) { return false; };
+static inline bool board_ti_rev_is(char *rev_tag, int cmp_len)
+{ return false; };
+static inline char *board_ti_get_rev(void) { return NULL; };
+static inline char *board_ti_get_config(void) { return NULL; };
+static inline char *board_ti_get_name(void) { return NULL; };
+static inline bool board_ti_was_eeprom_read(void) { return false; };
+static inline int ti_i2c_eeprom_am_set(const char *name, const char *rev)
+{ return -EINVAL; };
+#endif
 
 #endif	/* __BOARD_DETECT_H */
-- 
2.27.0

[PATCH v2 02/18] board: ti: j721e: Probe eeprom only when CONFIG_TI_I2C_BOARD_DETECT is defined

[Lokesh Vutla]

Guard all eeprom probe with TI_I2C_BOARD_DETECT to avoid reading eeprom
when eeprom is not available

Reviewed-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
---
 arch/arm/mach-k3/j721e_init.c |  3 ++-
 board/ti/j721e/evm.c          | 16 +++++++++++-----
 2 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c
index f9454e3273..5ec62a92f8 100644
--- a/arch/arm/mach-k3/j721e_init.c
+++ b/arch/arm/mach-k3/j721e_init.c
@@ -208,7 +208,8 @@ void board_init_f(ulong dummy)
 	k3_sysfw_print_ver();
 
 	/* Perform EEPROM-based board detection */
-	do_board_detect();
+	if (IS_ENABLED(CONFIG_TI_I2C_BOARD_DETECT))
+		do_board_detect();
 
 #if defined(CONFIG_CPU_V7R) && defined(CONFIG_K3_AVS0)
 	ret = uclass_get_device_by_driver(UCLASS_MISC, DM_GET_DRIVER(k3_avs),
diff --git a/board/ti/j721e/evm.c b/board/ti/j721e/evm.c
index a1e8fe59c4..7199d11e95 100644
--- a/board/ti/j721e/evm.c
+++ b/board/ti/j721e/evm.c
@@ -100,6 +100,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
 }
 #endif
 
+#ifdef CONFIG_TI_I2C_BOARD_DETECT
 int do_board_detect(void)
 {
 	int ret;
@@ -336,14 +337,17 @@ static int probe_daughtercards(void)
 
 	return 0;
 }
+#endif
 
 int board_late_init(void)
 {
-	setup_board_eeprom_env();
-	setup_serial();
+	if (IS_ENABLED(CONFIG_TI_I2C_BOARD_DETECT)) {
+		setup_board_eeprom_env();
+		setup_serial();
 
-	/* Check for and probe any plugged-in daughtercards */
-	probe_daughtercards();
+		/* Check for and probe any plugged-in daughtercards */
+		probe_daughtercards();
+	}
 
 	return 0;
 }
@@ -355,7 +359,9 @@ void spl_board_init(void)
 	int ret;
 #endif
 
-	probe_daughtercards();
+	if (IS_ENABLED(CONFIG_TARGET_J721E_A72_EVM) &&
+	    IS_ENABLED(CONFIG_TI_I2C_BOARD_DETECT))
+		probe_daughtercards();
 
 #ifdef CONFIG_ESM_K3
 	if (board_ti_k3_is("J721EX-PM2-SOM")) {
-- 
2.27.0

[PATCH v2 03/18] board: ti: j721e: Update fdt fixup logic for interconnect nodes

[Lokesh Vutla]

From: Suman Anna <s-anna@ti.com>

The DT nodes on J721E SoCs currently use a node name "interconnect" for
the various interconnects. This name is not following the DT schema, and
should simply be "bus". Update the fdt fixup logic to use both the current
and the expected corrected path names so that this logic won't be broken
with newer kernels.

Signed-off-by: Suman Anna <s-anna@ti.com>
---
 board/ti/j721e/evm.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/board/ti/j721e/evm.c b/board/ti/j721e/evm.c
index 7199d11e95..86e7cd4051 100644
--- a/board/ti/j721e/evm.c
+++ b/board/ti/j721e/evm.c
@@ -92,7 +92,10 @@ int ft_board_setup(void *blob, struct bd_info *bd)
 {
 	int ret;
 
-	ret = fdt_fixup_msmc_ram(blob, "/interconnect at 100000", "sram at 70000000");
+	ret = fdt_fixup_msmc_ram(blob, "/bus at 100000", "sram at 70000000");
+	if (ret < 0)
+		ret = fdt_fixup_msmc_ram(blob, "/interconnect at 100000",
+					 "sram@70000000");
 	if (ret)
 		printf("%s: fixing up msmc ram failed %d\n", __func__, ret);
 
-- 
2.27.0

[PATCH v2 04/18] arm: mach-k3: Fix platform hang when SPL_MULTI_DTB_FIT is not enabled

[Lokesh Vutla]

From: Jean-Jacques Hiblot <jjhiblot@ti.com>

If SPL_MULTI_DTB_FIT is not enabled, then CONFIG_SPL_OF_LIST is not defined
And in turn tispl.bin ends up not embedding any DTB.
Fixing it by using CONFIG_DEFAULT_DEVICE_TREE if SPL_OF_LIST is empty.

Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/mach-k3/config.mk | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-k3/config.mk b/arch/arm/mach-k3/config.mk
index f7afef610c..d20aceb3c8 100644
--- a/arch/arm/mach-k3/config.mk
+++ b/arch/arm/mach-k3/config.mk
@@ -58,10 +58,16 @@ SPL_ITS := u-boot-spl-k3.its
 ALL-y	+= tispl.bin
 endif
 
+ifeq ($(CONFIG_SPL_OF_LIST),)
+LIST_OF_DTB := $(CONFIG_DEFAULT_DEVICE_TREE)
+else
+LIST_OF_DTB := $(CONFIG_SPL_OF_LIST)
+endif
+
 quiet_cmd_k3_mkits = MKITS   $@
 cmd_k3_mkits = \
 	$(srctree)/tools/k3_fit_atf.sh \
-	$(patsubst %,$(obj)/dts/%.dtb,$(subst ",,$(CONFIG_SPL_OF_LIST))) > $@
+	$(patsubst %,$(obj)/dts/%.dtb,$(subst ",,$(LIST_OF_DTB))) > $@
 
 $(SPL_ITS): FORCE
 	$(call cmd,k3_mkits)
-- 
2.27.0

[PATCH v2 05/18] arm: mach-k3: Move mmr_unlock to a common location

[Lokesh Vutla]

mmr_unlock api is common for all k3 devices. Move it to a common
location.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/mach-k3/am6_init.c   | 10 ----------
 arch/arm/mach-k3/common.c     | 10 ++++++++++
 arch/arm/mach-k3/common.h     |  1 +
 arch/arm/mach-k3/j721e_init.c | 10 ----------
 4 files changed, 11 insertions(+), 20 deletions(-)

diff --git a/arch/arm/mach-k3/am6_init.c b/arch/arm/mach-k3/am6_init.c
index 516a02e8a8..abdec76d73 100644
--- a/arch/arm/mach-k3/am6_init.c
+++ b/arch/arm/mach-k3/am6_init.c
@@ -41,16 +41,6 @@ struct fwl_data main_cbass_fwls[] = {
 #endif
 #endif
 
-static void mmr_unlock(u32 base, u32 partition)
-{
-	/* Translate the base address */
-	phys_addr_t part_base = base + partition * CTRL_MMR0_PARTITION_SIZE;
-
-	/* Unlock the requested partition if locked using two-step sequence */
-	writel(CTRLMMR_LOCK_KICK0_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK0);
-	writel(CTRLMMR_LOCK_KICK1_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK1);
-}
-
 static void ctrl_mmr_unlock(void)
 {
 	/* Unlock all WKUP_CTRL_MMR0 module registers */
diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c
index 63bf060616..eb72451d06 100644
--- a/arch/arm/mach-k3/common.c
+++ b/arch/arm/mach-k3/common.c
@@ -61,6 +61,16 @@ void k3_sysfw_print_ver(void)
 	       ti_sci->version.firmware_revision, fw_desc);
 }
 
+void mmr_unlock(phys_addr_t base, u32 partition)
+{
+	/* Translate the base address */
+	phys_addr_t part_base = base + partition * CTRL_MMR0_PARTITION_SIZE;
+
+	/* Unlock the requested partition if locked using two-step sequence */
+	writel(CTRLMMR_LOCK_KICK0_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK0);
+	writel(CTRLMMR_LOCK_KICK1_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK1);
+}
+
 DECLARE_GLOBAL_DATA_PTR;
 
 #ifdef CONFIG_K3_EARLY_CONS
diff --git a/arch/arm/mach-k3/common.h b/arch/arm/mach-k3/common.h
index 94cdcb56ad..e8cc3daac1 100644
--- a/arch/arm/mach-k3/common.h
+++ b/arch/arm/mach-k3/common.h
@@ -28,3 +28,4 @@ void start_non_linux_remote_cores(void);
 int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr);
 void k3_sysfw_print_ver(void);
 void spl_enable_dcache(void);
+void mmr_unlock(phys_addr_t base, u32 partition);
diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c
index 5ec62a92f8..2010cab1d1 100644
--- a/arch/arm/mach-k3/j721e_init.c
+++ b/arch/arm/mach-k3/j721e_init.c
@@ -64,16 +64,6 @@ struct fwl_data cbass_hc_cfg0_fwls[] = {
 #endif
 #endif
 
-static void mmr_unlock(u32 base, u32 partition)
-{
-	/* Translate the base address */
-	phys_addr_t part_base = base + partition * CTRL_MMR0_PARTITION_SIZE;
-
-	/* Unlock the requested partition if locked using two-step sequence */
-	writel(CTRLMMR_LOCK_KICK0_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK0);
-	writel(CTRLMMR_LOCK_KICK1_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK1);
-}
-
 static void ctrl_mmr_unlock(void)
 {
 	/* Unlock all WKUP_CTRL_MMR0 module registers */
-- 
2.27.0

[PATCH v2 05/18] arm: mach-k3: Move mmr_unlock to a common location

[Suman Anna]

On 7/27/20 4:45 AM, Lokesh Vutla wrote:
> mmr_unlock api is common for all k3 devices. Move it to a common
> location.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Reviewed-by: Suman Anna <s-anna@ti.com>

> ---
>   arch/arm/mach-k3/am6_init.c   | 10 ----------
>   arch/arm/mach-k3/common.c     | 10 ++++++++++
>   arch/arm/mach-k3/common.h     |  1 +
>   arch/arm/mach-k3/j721e_init.c | 10 ----------
>   4 files changed, 11 insertions(+), 20 deletions(-)
> 
> diff --git a/arch/arm/mach-k3/am6_init.c b/arch/arm/mach-k3/am6_init.c
> index 516a02e8a8..abdec76d73 100644
> --- a/arch/arm/mach-k3/am6_init.c
> +++ b/arch/arm/mach-k3/am6_init.c
> @@ -41,16 +41,6 @@ struct fwl_data main_cbass_fwls[] = {
>   #endif
>   #endif
>   
> -static void mmr_unlock(u32 base, u32 partition)
> -{
> -	/* Translate the base address */
> -	phys_addr_t part_base = base + partition * CTRL_MMR0_PARTITION_SIZE;
> -
> -	/* Unlock the requested partition if locked using two-step sequence */
> -	writel(CTRLMMR_LOCK_KICK0_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK0);
> -	writel(CTRLMMR_LOCK_KICK1_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK1);
> -}
> -
>   static void ctrl_mmr_unlock(void)
>   {
>   	/* Unlock all WKUP_CTRL_MMR0 module registers */
> diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c
> index 63bf060616..eb72451d06 100644
> --- a/arch/arm/mach-k3/common.c
> +++ b/arch/arm/mach-k3/common.c
> @@ -61,6 +61,16 @@ void k3_sysfw_print_ver(void)
>   	       ti_sci->version.firmware_revision, fw_desc);
>   }
>   
> +void mmr_unlock(phys_addr_t base, u32 partition)
> +{
> +	/* Translate the base address */
> +	phys_addr_t part_base = base + partition * CTRL_MMR0_PARTITION_SIZE;
> +
> +	/* Unlock the requested partition if locked using two-step sequence */
> +	writel(CTRLMMR_LOCK_KICK0_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK0);
> +	writel(CTRLMMR_LOCK_KICK1_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK1);
> +}
> +
>   DECLARE_GLOBAL_DATA_PTR;
>   
>   #ifdef CONFIG_K3_EARLY_CONS
> diff --git a/arch/arm/mach-k3/common.h b/arch/arm/mach-k3/common.h
> index 94cdcb56ad..e8cc3daac1 100644
> --- a/arch/arm/mach-k3/common.h
> +++ b/arch/arm/mach-k3/common.h
> @@ -28,3 +28,4 @@ void start_non_linux_remote_cores(void);
>   int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr);
>   void k3_sysfw_print_ver(void);
>   void spl_enable_dcache(void);
> +void mmr_unlock(phys_addr_t base, u32 partition);
> diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c
> index 5ec62a92f8..2010cab1d1 100644
> --- a/arch/arm/mach-k3/j721e_init.c
> +++ b/arch/arm/mach-k3/j721e_init.c
> @@ -64,16 +64,6 @@ struct fwl_data cbass_hc_cfg0_fwls[] = {
>   #endif
>   #endif
>   
> -static void mmr_unlock(u32 base, u32 partition)
> -{
> -	/* Translate the base address */
> -	phys_addr_t part_base = base + partition * CTRL_MMR0_PARTITION_SIZE;
> -
> -	/* Unlock the requested partition if locked using two-step sequence */
> -	writel(CTRLMMR_LOCK_KICK0_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK0);
> -	writel(CTRLMMR_LOCK_KICK1_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK1);
> -}
> -
>   static void ctrl_mmr_unlock(void)
>   {
>   	/* Unlock all WKUP_CTRL_MMR0 module registers */
> 

[PATCH v2 06/18] arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image

[Lokesh Vutla]

Starting J7200 SoC, ROM supports for loading sysfw directly from boot
image. In such cases, SPL need not load sysfw from boot media, but need
to receive boot notification message from sysfw. So separate out
remoteproc calls for system controller from sysfw loader and just
receive the boot notification if sysfw is already loaded.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/mach-k3/am6_init.c                  |  2 +-
 arch/arm/mach-k3/include/mach/sysfw-loader.h |  4 +-
 arch/arm/mach-k3/j721e_init.c                |  2 +-
 arch/arm/mach-k3/sysfw-loader.c              | 56 +++++++++++++-------
 4 files changed, 43 insertions(+), 21 deletions(-)

diff --git a/arch/arm/mach-k3/am6_init.c b/arch/arm/mach-k3/am6_init.c
index abdec76d73..4250ac355b 100644
--- a/arch/arm/mach-k3/am6_init.c
+++ b/arch/arm/mach-k3/am6_init.c
@@ -155,7 +155,7 @@ void board_init_f(ulong dummy)
 	 * Load, start up, and configure system controller firmware while
 	 * also populating the SYSFW post-PM configuration callback hook.
 	 */
-	k3_sysfw_loader(k3_mmc_stop_clock, k3_mmc_restart_clock);
+	k3_sysfw_loader(false, k3_mmc_stop_clock, k3_mmc_restart_clock);
 
 	/* Prepare console output */
 	preloader_console_init();
diff --git a/arch/arm/mach-k3/include/mach/sysfw-loader.h b/arch/arm/mach-k3/include/mach/sysfw-loader.h
index 6f5612b4fd..b23a9e821e 100644
--- a/arch/arm/mach-k3/include/mach/sysfw-loader.h
+++ b/arch/arm/mach-k3/include/mach/sysfw-loader.h
@@ -7,6 +7,8 @@
 #ifndef _SYSFW_LOADER_H_
 #define _SYSFW_LOADER_H_
 
-void k3_sysfw_loader(void (*config_pm_pre_callback)(void), void (*config_pm_done_callback)(void));
+void k3_sysfw_loader(bool rom_loaded_sysfw,
+		     void (*config_pm_pre_callback)(void),
+		     void (*config_pm_done_callback)(void));
 
 #endif
diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c
index 2010cab1d1..461a9d7f8f 100644
--- a/arch/arm/mach-k3/j721e_init.c
+++ b/arch/arm/mach-k3/j721e_init.c
@@ -174,7 +174,7 @@ void board_init_f(ulong dummy)
 	 * callback hook, effectively switching on (or over) the console
 	 * output.
 	 */
-	k3_sysfw_loader(k3_mmc_stop_clock, k3_mmc_restart_clock);
+	k3_sysfw_loader(false, k3_mmc_stop_clock, k3_mmc_restart_clock);
 
 	/* Prepare console output */
 	preloader_console_init();
diff --git a/arch/arm/mach-k3/sysfw-loader.c b/arch/arm/mach-k3/sysfw-loader.c
index 513be09c68..f62bfa995c 100644
--- a/arch/arm/mach-k3/sysfw-loader.c
+++ b/arch/arm/mach-k3/sysfw-loader.c
@@ -32,6 +32,12 @@ DECLARE_GLOBAL_DATA_PTR;
 #define SYSFW_CFG_RM			"rm-cfg.bin"
 #define SYSFW_CFG_SEC			"sec-cfg.bin"
 
+/*
+ * It is assumed that remoteproc device 0 is the corresponding
+ * system-controller that runs SYSFW. Make sure DT reflects the same.
+ */
+#define K3_SYSTEM_CONTROLLER_RPROC_ID	0
+
 static bool sysfw_loaded;
 static void *sysfw_load_address;
 
@@ -71,6 +77,26 @@ static int fit_get_data_by_name(const void *fit, int images, const char *name,
 	return fit_image_get_data(fit, node_offset, addr, size);
 }
 
+static void k3_start_system_controller(int rproc_id, bool rproc_loaded,
+				       ulong addr, ulong size)
+{
+	int ret;
+
+	ret = rproc_dev_init(rproc_id);
+	if (ret)
+		panic("rproc failed to be initialized (%d)\n", ret);
+
+	if (!rproc_loaded) {
+		ret = rproc_load(rproc_id, addr, size);
+		if (ret)
+			panic("Firmware failed to start on rproc (%d)\n", ret);
+	}
+
+	ret = rproc_start(0);
+	if (ret)
+		panic("Firmware init failed on rproc (%d)\n", ret);
+}
+
 static void k3_sysfw_load_using_fit(void *fit)
 {
 	int images;
@@ -90,23 +116,9 @@ static void k3_sysfw_load_using_fit(void *fit)
 		panic("Error accessing %s node in FIT (%d)\n", SYSFW_FIRMWARE,
 		      ret);
 
-	/*
-	 * Start up system controller firmware
-	 *
-	 * It is assumed that remoteproc device 0 is the corresponding
-	 * system-controller that runs SYSFW. Make sure DT reflects the same.
-	 */
-	ret = rproc_dev_init(0);
-	if (ret)
-		panic("rproc failed to be initialized (%d)\n", ret);
-
-	ret = rproc_load(0, (ulong)sysfw_addr, (ulong)sysfw_size);
-	if (ret)
-		panic("Firmware failed to start on rproc (%d)\n", ret);
-
-	ret = rproc_start(0);
-	if (ret)
-		panic("Firmware init failed on rproc (%d)\n", ret);
+	/* Start up system controller firmware */
+	k3_start_system_controller(K3_SYSTEM_CONTROLLER_RPROC_ID, false,
+				   (ulong)sysfw_addr, (ulong)sysfw_size);
 }
 
 static void k3_sysfw_configure_using_fit(void *fit,
@@ -222,7 +234,8 @@ static void *k3_sysfw_get_spi_addr(void)
 }
 #endif
 
-void k3_sysfw_loader(void (*config_pm_pre_callback) (void),
+void k3_sysfw_loader(bool rom_loaded_sysfw,
+		     void (*config_pm_pre_callback)(void),
 		     void (*config_pm_done_callback)(void))
 {
 	struct spl_image_info spl_image = { 0 };
@@ -230,6 +243,13 @@ void k3_sysfw_loader(void (*config_pm_pre_callback) (void),
 	struct ti_sci_handle *ti_sci;
 	int ret = 0;
 
+	if (rom_loaded_sysfw) {
+		k3_start_system_controller(K3_SYSTEM_CONTROLLER_RPROC_ID,
+					   rom_loaded_sysfw, 0, 0);
+		sysfw_loaded = true;
+		return;
+	}
+
 	/* Reserve a block of aligned memory for loading the SYSFW image */
 	sysfw_load_address = memalign(ARCH_DMA_MINALIGN,
 				      CONFIG_K3_SYSFW_IMAGE_SIZE_MAX);
-- 
2.27.0

[PATCH v2 06/18] arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image

[Suman Anna]

Hi Lokesh,

On 7/27/20 4:45 AM, Lokesh Vutla wrote:
> Starting J7200 SoC, ROM supports for loading sysfw directly from boot
> image. In such cases, SPL need not load sysfw from boot media, but need
> to receive boot notification message from sysfw. So separate out
> remoteproc calls for system controller from sysfw loader and just
> receive the boot notification if sysfw is already loaded.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---
>   arch/arm/mach-k3/am6_init.c                  |  2 +-
>   arch/arm/mach-k3/include/mach/sysfw-loader.h |  4 +-
>   arch/arm/mach-k3/j721e_init.c                |  2 +-
>   arch/arm/mach-k3/sysfw-loader.c              | 56 +++++++++++++-------
>   4 files changed, 43 insertions(+), 21 deletions(-)
> 
> diff --git a/arch/arm/mach-k3/am6_init.c b/arch/arm/mach-k3/am6_init.c
> index abdec76d73..4250ac355b 100644
> --- a/arch/arm/mach-k3/am6_init.c
> +++ b/arch/arm/mach-k3/am6_init.c
> @@ -155,7 +155,7 @@ void board_init_f(ulong dummy)
>   	 * Load, start up, and configure system controller firmware while
>   	 * also populating the SYSFW post-PM configuration callback hook.
>   	 */
> -	k3_sysfw_loader(k3_mmc_stop_clock, k3_mmc_restart_clock);
> +	k3_sysfw_loader(false, k3_mmc_stop_clock, k3_mmc_restart_clock);
>   
>   	/* Prepare console output */
>   	preloader_console_init();
> diff --git a/arch/arm/mach-k3/include/mach/sysfw-loader.h b/arch/arm/mach-k3/include/mach/sysfw-loader.h
> index 6f5612b4fd..b23a9e821e 100644
> --- a/arch/arm/mach-k3/include/mach/sysfw-loader.h
> +++ b/arch/arm/mach-k3/include/mach/sysfw-loader.h
> @@ -7,6 +7,8 @@
>   #ifndef _SYSFW_LOADER_H_
>   #define _SYSFW_LOADER_H_
>   
> -void k3_sysfw_loader(void (*config_pm_pre_callback)(void), void (*config_pm_done_callback)(void));
> +void k3_sysfw_loader(bool rom_loaded_sysfw,
> +		     void (*config_pm_pre_callback)(void),
> +		     void (*config_pm_done_callback)(void));
>   
>   #endif
> diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c
> index 2010cab1d1..461a9d7f8f 100644
> --- a/arch/arm/mach-k3/j721e_init.c
> +++ b/arch/arm/mach-k3/j721e_init.c
> @@ -174,7 +174,7 @@ void board_init_f(ulong dummy)
>   	 * callback hook, effectively switching on (or over) the console
>   	 * output.
>   	 */
> -	k3_sysfw_loader(k3_mmc_stop_clock, k3_mmc_restart_clock);
> +	k3_sysfw_loader(false, k3_mmc_stop_clock, k3_mmc_restart_clock);

Any reason why you want to add the new argument at the front, rather 
than the end which is typical?

>   
>   	/* Prepare console output */
>   	preloader_console_init();
> diff --git a/arch/arm/mach-k3/sysfw-loader.c b/arch/arm/mach-k3/sysfw-loader.c
> index 513be09c68..f62bfa995c 100644
> --- a/arch/arm/mach-k3/sysfw-loader.c
> +++ b/arch/arm/mach-k3/sysfw-loader.c
> @@ -32,6 +32,12 @@ DECLARE_GLOBAL_DATA_PTR;
>   #define SYSFW_CFG_RM			"rm-cfg.bin"
>   #define SYSFW_CFG_SEC			"sec-cfg.bin"
>   
> +/*
> + * It is assumed that remoteproc device 0 is the corresponding
> + * system-controller that runs SYSFW. Make sure DT reflects the same.
> + */
> +#define K3_SYSTEM_CONTROLLER_RPROC_ID	0
> +
>   static bool sysfw_loaded;
>   static void *sysfw_load_address;
>   
> @@ -71,6 +77,26 @@ static int fit_get_data_by_name(const void *fit, int images, const char *name,
>   	return fit_image_get_data(fit, node_offset, addr, size);
>   }
>   
> +static void k3_start_system_controller(int rproc_id, bool rproc_loaded,
> +				       ulong addr, ulong size)

Are you expecting the SYSTEM_CONTROLLER_RPROC_ID to be a different value 
from 0? Do you really need the rproc_id argument, rather than directly 
using it in code?

regards
Suman

> +{
> +	int ret;
> +
> +	ret = rproc_dev_init(rproc_id);
> +	if (ret)
> +		panic("rproc failed to be initialized (%d)\n", ret);
> +
> +	if (!rproc_loaded) {
> +		ret = rproc_load(rproc_id, addr, size);
> +		if (ret)
> +			panic("Firmware failed to start on rproc (%d)\n", ret);
> +	}
> +
> +	ret = rproc_start(0);
> +	if (ret)
> +		panic("Firmware init failed on rproc (%d)\n", ret);
> +}
> +
>   static void k3_sysfw_load_using_fit(void *fit)
>   {
>   	int images;
> @@ -90,23 +116,9 @@ static void k3_sysfw_load_using_fit(void *fit)
>   		panic("Error accessing %s node in FIT (%d)\n", SYSFW_FIRMWARE,
>   		      ret);
>   
> -	/*
> -	 * Start up system controller firmware
> -	 *
> -	 * It is assumed that remoteproc device 0 is the corresponding
> -	 * system-controller that runs SYSFW. Make sure DT reflects the same.
> -	 */
> -	ret = rproc_dev_init(0);
> -	if (ret)
> -		panic("rproc failed to be initialized (%d)\n", ret);
> -
> -	ret = rproc_load(0, (ulong)sysfw_addr, (ulong)sysfw_size);
> -	if (ret)
> -		panic("Firmware failed to start on rproc (%d)\n", ret);
> -
> -	ret = rproc_start(0);
> -	if (ret)
> -		panic("Firmware init failed on rproc (%d)\n", ret);
> +	/* Start up system controller firmware */
> +	k3_start_system_controller(K3_SYSTEM_CONTROLLER_RPROC_ID, false,
> +				   (ulong)sysfw_addr, (ulong)sysfw_size);
>   }
>   
>   static void k3_sysfw_configure_using_fit(void *fit,
> @@ -222,7 +234,8 @@ static void *k3_sysfw_get_spi_addr(void)
>   }
>   #endif
>   
> -void k3_sysfw_loader(void (*config_pm_pre_callback) (void),
> +void k3_sysfw_loader(bool rom_loaded_sysfw,
> +		     void (*config_pm_pre_callback)(void),
>   		     void (*config_pm_done_callback)(void))
>   {
>   	struct spl_image_info spl_image = { 0 };
> @@ -230,6 +243,13 @@ void k3_sysfw_loader(void (*config_pm_pre_callback) (void),
>   	struct ti_sci_handle *ti_sci;
>   	int ret = 0;
>   
> +	if (rom_loaded_sysfw) {
> +		k3_start_system_controller(K3_SYSTEM_CONTROLLER_RPROC_ID,
> +					   rom_loaded_sysfw, 0, 0);
> +		sysfw_loaded = true;
> +		return;
> +	}
> +
>   	/* Reserve a block of aligned memory for loading the SYSFW image */
>   	sysfw_load_address = memalign(ARCH_DMA_MINALIGN,
>   				      CONFIG_K3_SYSFW_IMAGE_SIZE_MAX);
> 

[PATCH v2 06/18] arm: mach-k3: sysfw-loader: Add support for rom loading sysfw image

[Lokesh Vutla]

On 27/07/20 10:47 pm, Suman Anna wrote:
> Hi Lokesh,
> 
> On 7/27/20 4:45 AM, Lokesh Vutla wrote:
>> Starting J7200 SoC, ROM supports for loading sysfw directly from boot
>> image. In such cases, SPL need not load sysfw from boot media, but need
>> to receive boot notification message from sysfw. So separate out
>> remoteproc calls for system controller from sysfw loader and just
>> receive the boot notification if sysfw is already loaded.
>>
>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
>> ---
>> ? arch/arm/mach-k3/am6_init.c????????????????? |? 2 +-
>> ? arch/arm/mach-k3/include/mach/sysfw-loader.h |? 4 +-
>> ? arch/arm/mach-k3/j721e_init.c??????????????? |? 2 +-
>> ? arch/arm/mach-k3/sysfw-loader.c????????????? | 56 +++++++++++++-------
>> ? 4 files changed, 43 insertions(+), 21 deletions(-)
>>
>> diff --git a/arch/arm/mach-k3/am6_init.c b/arch/arm/mach-k3/am6_init.c
>> index abdec76d73..4250ac355b 100644
>> --- a/arch/arm/mach-k3/am6_init.c
>> +++ b/arch/arm/mach-k3/am6_init.c
>> @@ -155,7 +155,7 @@ void board_init_f(ulong dummy)
>> ?????? * Load, start up, and configure system controller firmware while
>> ?????? * also populating the SYSFW post-PM configuration callback hook.
>> ?????? */
>> -??? k3_sysfw_loader(k3_mmc_stop_clock, k3_mmc_restart_clock);
>> +??? k3_sysfw_loader(false, k3_mmc_stop_clock, k3_mmc_restart_clock);
>> ? ????? /* Prepare console output */
>> ????? preloader_console_init();
>> diff --git a/arch/arm/mach-k3/include/mach/sysfw-loader.h
>> b/arch/arm/mach-k3/include/mach/sysfw-loader.h
>> index 6f5612b4fd..b23a9e821e 100644
>> --- a/arch/arm/mach-k3/include/mach/sysfw-loader.h
>> +++ b/arch/arm/mach-k3/include/mach/sysfw-loader.h
>> @@ -7,6 +7,8 @@
>> ? #ifndef _SYSFW_LOADER_H_
>> ? #define _SYSFW_LOADER_H_
>> ? -void k3_sysfw_loader(void (*config_pm_pre_callback)(void), void
>> (*config_pm_done_callback)(void));
>> +void k3_sysfw_loader(bool rom_loaded_sysfw,
>> +???????????? void (*config_pm_pre_callback)(void),
>> +???????????? void (*config_pm_done_callback)(void));
>> ? ? #endif
>> diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c
>> index 2010cab1d1..461a9d7f8f 100644
>> --- a/arch/arm/mach-k3/j721e_init.c
>> +++ b/arch/arm/mach-k3/j721e_init.c
>> @@ -174,7 +174,7 @@ void board_init_f(ulong dummy)
>> ?????? * callback hook, effectively switching on (or over) the console
>> ?????? * output.
>> ?????? */
>> -??? k3_sysfw_loader(k3_mmc_stop_clock, k3_mmc_restart_clock);
>> +??? k3_sysfw_loader(false, k3_mmc_stop_clock, k3_mmc_restart_clock);
> 
> Any reason why you want to add the new argument at the front, rather than the
> end which is typical?

Yes this was intentional. It made more sense to get the sysfw state as a first
parameter and then look for other parameters,


> 
>> ? ????? /* Prepare console output */
>> ????? preloader_console_init();
>> diff --git a/arch/arm/mach-k3/sysfw-loader.c b/arch/arm/mach-k3/sysfw-loader.c
>> index 513be09c68..f62bfa995c 100644
>> --- a/arch/arm/mach-k3/sysfw-loader.c
>> +++ b/arch/arm/mach-k3/sysfw-loader.c
>> @@ -32,6 +32,12 @@ DECLARE_GLOBAL_DATA_PTR;
>> ? #define SYSFW_CFG_RM??????????? "rm-cfg.bin"
>> ? #define SYSFW_CFG_SEC??????????? "sec-cfg.bin"
>> ? +/*
>> + * It is assumed that remoteproc device 0 is the corresponding
>> + * system-controller that runs SYSFW. Make sure DT reflects the same.
>> + */
>> +#define K3_SYSTEM_CONTROLLER_RPROC_ID??? 0
>> +
>> ? static bool sysfw_loaded;
>> ? static void *sysfw_load_address;
>> ? @@ -71,6 +77,26 @@ static int fit_get_data_by_name(const void *fit, int
>> images, const char *name,
>> ????? return fit_image_get_data(fit, node_offset, addr, size);
>> ? }
>> ? +static void k3_start_system_controller(int rproc_id, bool rproc_loaded,
>> +?????????????????????? ulong addr, ulong size)
> 
> Are you expecting the SYSTEM_CONTROLLER_RPROC_ID to be a different value from 0?
> Do you really need the rproc_id argument, rather than directly using it in code?

I didn't want to hardcode in multiple places and I cannot guarantee if it can
change in future. So I added it as a future proof.

Thanks and regards,
Lokesh

[PATCH v2 07/18] arm: mach-k3: j721e: Add detection for j721e

[Lokesh Vutla]

Add an api soc_is_j721e(), and use it to enable certain functionality
that is available only on j721e.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
---
 arch/arm/mach-k3/common.c                 | 10 ++++++++++
 arch/arm/mach-k3/include/mach/sys_proto.h |  2 ++
 arch/arm/mach-k3/j721e_init.c             |  3 +++
 3 files changed, 15 insertions(+)

diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c
index eb72451d06..aec6c600b9 100644
--- a/arch/arm/mach-k3/common.c
+++ b/arch/arm/mach-k3/common.c
@@ -355,6 +355,16 @@ int print_cpuinfo(void)
 }
 #endif
 
+bool soc_is_j721e(void)
+{
+	u32 soc;
+
+	soc = (readl(CTRLMMR_WKUP_JTAG_ID) &
+		JTAG_ID_PARTNO_MASK) >> JTAG_ID_PARTNO_SHIFT;
+
+	return soc == J721E;
+}
+
 #ifdef CONFIG_ARM64
 void board_prep_linux(bootm_headers_t *images)
 {
diff --git a/arch/arm/mach-k3/include/mach/sys_proto.h b/arch/arm/mach-k3/include/mach/sys_proto.h
index 3c825aa3d1..48b11178c3 100644
--- a/arch/arm/mach-k3/include/mach/sys_proto.h
+++ b/arch/arm/mach-k3/include/mach/sys_proto.h
@@ -16,4 +16,6 @@ int do_board_detect(void);
 void release_resources_for_core_shutdown(void);
 int fdt_disable_node(void *blob, char *node_path);
 
+bool soc_is_j721e(void);
+
 #endif
diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c
index 461a9d7f8f..3b15da2d7c 100644
--- a/arch/arm/mach-k3/j721e_init.c
+++ b/arch/arm/mach-k3/j721e_init.c
@@ -361,6 +361,9 @@ void start_non_linux_remote_cores(void)
 	int size = 0, ret;
 	u32 loadaddr = 0;
 
+	if (!soc_is_j721e())
+		return;
+
 	size = load_firmware("name_mainr5f0_0fw", "addr_mainr5f0_0load",
 			     &loadaddr);
 	if (size <= 0)
-- 
2.27.0

[PATCH v2 08/18] arm: mach-k3: j721e: Fix unlocking control module registers

[Lokesh Vutla]

In main control mmr there is no partition 4 and partition 6 is available
only on J721e. Fix the same in ctrl_mmr_unlock function

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/mach-k3/j721e_init.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c
index 3b15da2d7c..63a31c18ce 100644
--- a/arch/arm/mach-k3/j721e_init.c
+++ b/arch/arm/mach-k3/j721e_init.c
@@ -87,9 +87,9 @@ static void ctrl_mmr_unlock(void)
 	mmr_unlock(CTRL_MMR0_BASE, 1);
 	mmr_unlock(CTRL_MMR0_BASE, 2);
 	mmr_unlock(CTRL_MMR0_BASE, 3);
-	mmr_unlock(CTRL_MMR0_BASE, 4);
 	mmr_unlock(CTRL_MMR0_BASE, 5);
-	mmr_unlock(CTRL_MMR0_BASE, 6);
+	if (soc_is_j721e())
+		mmr_unlock(CTRL_MMR0_BASE, 6);
 	mmr_unlock(CTRL_MMR0_BASE, 7);
 }
 
-- 
2.27.0

[PATCH v2 08/18] arm: mach-k3: j721e: Fix unlocking control module registers

[Suman Anna]

On 7/27/20 4:45 AM, Lokesh Vutla wrote:
> In main control mmr there is no partition 4 and partition 6 is available
> only on J721e. Fix the same in ctrl_mmr_unlock function
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Reviewed-by: Suman Anna <s-anna@ti.com>

> ---
>   arch/arm/mach-k3/j721e_init.c | 4 ++--
>   1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c
> index 3b15da2d7c..63a31c18ce 100644
> --- a/arch/arm/mach-k3/j721e_init.c
> +++ b/arch/arm/mach-k3/j721e_init.c
> @@ -87,9 +87,9 @@ static void ctrl_mmr_unlock(void)
>   	mmr_unlock(CTRL_MMR0_BASE, 1);
>   	mmr_unlock(CTRL_MMR0_BASE, 2);
>   	mmr_unlock(CTRL_MMR0_BASE, 3);
> -	mmr_unlock(CTRL_MMR0_BASE, 4);
>   	mmr_unlock(CTRL_MMR0_BASE, 5);
> -	mmr_unlock(CTRL_MMR0_BASE, 6);
> +	if (soc_is_j721e())
> +		mmr_unlock(CTRL_MMR0_BASE, 6);
>   	mmr_unlock(CTRL_MMR0_BASE, 7);
>   }
>   
> 

[PATCH v2 09/18] arm: mach-k3: j7200: Add support for SOC detection

[Lokesh Vutla]

The J7200 SoC is a part of the K3 Multicore SoC architecture platform.
It is targeted for automotive gateway, vehicle compute systems,
Vehicle-to-Vehicle (V2V) and Vehicle-to-Everything (V2X) applications.
The SoC aims to meet the complex processing needs of modern embedded
products.

Some highlights of this SoC are:
* Dual Cortex-A72s in a single cluster, two clusters of lockstep
  capable dual Cortex-R5F MCUs and a Centralized Device Management and
  Security Controller (DMSC).
* Configurable L3 Cache and IO-coherent architecture with high data
  throughput capable distributed DMA architecture under NAVSS.
* Integrated Ethernet switch supporting up to a total of 4 external ports
  in addition to legacy Ethernet switch of up to 2 ports.
* Upto 1 PCIe-GEN3 controller, 1 USB3.0 Dual-role device subsystems,
  20 MCANs, 3 McASP, eMMC and SD, OSPI/HyperBus memory controller, I3C and
  I2C, eCAP/eQEP, eHRPWM among other peripherals.
* One hardware accelerator block containing AES/DES/SHA/MD5 called SA2UL
  management.

See J7200 Technical Reference Manual (SPRUIU1, June 2020)
for further details: https://www.ti.com/lit/pdf/spruiu1

Add support for detection J7200 SoC

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
---
 arch/arm/mach-k3/common.c                 | 10 ++++++++++
 arch/arm/mach-k3/common.h                 |  1 +
 arch/arm/mach-k3/include/mach/sys_proto.h |  1 +
 3 files changed, 12 insertions(+)

diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c
index aec6c600b9..d065bdbc83 100644
--- a/arch/arm/mach-k3/common.c
+++ b/arch/arm/mach-k3/common.c
@@ -365,6 +365,16 @@ bool soc_is_j721e(void)
 	return soc == J721E;
 }
 
+bool soc_is_j7200(void)
+{
+	u32 soc;
+
+	soc = (readl(CTRLMMR_WKUP_JTAG_ID) &
+		JTAG_ID_PARTNO_MASK) >> JTAG_ID_PARTNO_SHIFT;
+
+	return soc == J7200;
+}
+
 #ifdef CONFIG_ARM64
 void board_prep_linux(bootm_headers_t *images)
 {
diff --git a/arch/arm/mach-k3/common.h b/arch/arm/mach-k3/common.h
index e8cc3daac1..8f5a5f323a 100644
--- a/arch/arm/mach-k3/common.h
+++ b/arch/arm/mach-k3/common.h
@@ -10,6 +10,7 @@
 
 #define AM65X	0xbb5a
 #define J721E	0xbb64
+#define J7200	0xbb6d
 
 #define REV_PG1_0	0
 #define REV_PG2_0	1
diff --git a/arch/arm/mach-k3/include/mach/sys_proto.h b/arch/arm/mach-k3/include/mach/sys_proto.h
index 48b11178c3..60287b261c 100644
--- a/arch/arm/mach-k3/include/mach/sys_proto.h
+++ b/arch/arm/mach-k3/include/mach/sys_proto.h
@@ -17,5 +17,6 @@ void release_resources_for_core_shutdown(void);
 int fdt_disable_node(void *blob, char *node_path);
 
 bool soc_is_j721e(void);
+bool soc_is_j7200(void);
 
 #endif
-- 
2.27.0

[PATCH v2 10/18] arm: mach-k3: j7200: Add support for storing extended boot info from ROM

[Lokesh Vutla]

Starting J7200 SoC, ROM supports for loading sysfw directly from boot
image. ROM passes this information on number of images that are loaded
to bootloader at  certain location. Add support for storing this
information before it gets corrupted.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/mach-k3/include/mach/hardware.h       | 7 +++++++
 arch/arm/mach-k3/include/mach/j721e_hardware.h | 3 +++
 arch/arm/mach-k3/j721e_init.c                  | 7 +++++--
 3 files changed, 15 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-k3/include/mach/hardware.h b/arch/arm/mach-k3/include/mach/hardware.h
index 0ad761418b..02b3df0e1b 100644
--- a/arch/arm/mach-k3/include/mach/hardware.h
+++ b/arch/arm/mach-k3/include/mach/hardware.h
@@ -21,4 +21,11 @@
 #define JTAG_ID_PARTNO_SHIFT	12
 #define JTAG_ID_PARTNO_MASK	(0xffff << 12)
 
+#define K3_ROM_BOOT_HEADER_MAGIC	"EXTBOOT"
+
+struct rom_extended_boot_data {
+	char header[8];
+	u32 num_components;
+};
+
 #endif /* _ASM_ARCH_HARDWARE_H_ */
diff --git a/arch/arm/mach-k3/include/mach/j721e_hardware.h b/arch/arm/mach-k3/include/mach/j721e_hardware.h
index 19873d6e28..b98f0a82f1 100644
--- a/arch/arm/mach-k3/include/mach/j721e_hardware.h
+++ b/arch/arm/mach-k3/include/mach/j721e_hardware.h
@@ -51,6 +51,9 @@
 #define CTRLMMR_LOCK_KICK1				0x0100c
 #define CTRLMMR_LOCK_KICK1_UNLOCK_VAL			0xd172bc5a
 
+/* ROM HANDOFF Structure location */
+#define ROM_ENTENDED_BOOT_DATA_INFO			0x41cffb00
+
 /* MCU SCRATCHPAD usage */
 #define TI_SRAM_SCRATCH_BOARD_EEPROM_START	CONFIG_SYS_K3_MCU_SCRATCHPAD_BASE
 
diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c
index 63a31c18ce..6246de3a26 100644
--- a/arch/arm/mach-k3/j721e_init.c
+++ b/arch/arm/mach-k3/j721e_init.c
@@ -126,10 +126,13 @@ void k3_mmc_restart_clock(void)
  * it to the .data section.
  */
 u32 bootindex __attribute__((section(".data")));
+static struct rom_extended_boot_data bootdata __section(.data);
 
-static void store_boot_index_from_rom(void)
+static void store_boot_info_from_rom(void)
 {
 	bootindex = *(u32 *)(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX);
+	memcpy(&bootdata, (uintptr_t *)ROM_ENTENDED_BOOT_DATA_INFO,
+	       sizeof(struct rom_extended_boot_data));
 }
 
 void board_init_f(ulong dummy)
@@ -142,7 +145,7 @@ void board_init_f(ulong dummy)
 	 * Cannot delay this further as there is a chance that
 	 * K3_BOOT_PARAM_TABLE_INDEX can be over written by SPL MALLOC section.
 	 */
-	store_boot_index_from_rom();
+	store_boot_info_from_rom();
 
 	/* Make all control module registers accessible */
 	ctrl_mmr_unlock();
-- 
2.27.0

[PATCH v2 10/18] arm: mach-k3: j7200: Add support for storing extended boot info from ROM

[Suman Anna]

On 7/27/20 4:45 AM, Lokesh Vutla wrote:
> Starting J7200 SoC, ROM supports for loading sysfw directly from boot
> image. ROM passes this information on number of images that are loaded
> to bootloader at  certain location. Add support for storing this

Extra whitespace before certain. Otherwise,

Reviewed-by: Suman Anna <s-anna@ti.com>


> information before it gets corrupted.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---
>   arch/arm/mach-k3/include/mach/hardware.h       | 7 +++++++
>   arch/arm/mach-k3/include/mach/j721e_hardware.h | 3 +++
>   arch/arm/mach-k3/j721e_init.c                  | 7 +++++--
>   3 files changed, 15 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/mach-k3/include/mach/hardware.h b/arch/arm/mach-k3/include/mach/hardware.h
> index 0ad761418b..02b3df0e1b 100644
> --- a/arch/arm/mach-k3/include/mach/hardware.h
> +++ b/arch/arm/mach-k3/include/mach/hardware.h
> @@ -21,4 +21,11 @@
>   #define JTAG_ID_PARTNO_SHIFT	12
>   #define JTAG_ID_PARTNO_MASK	(0xffff << 12)
>   
> +#define K3_ROM_BOOT_HEADER_MAGIC	"EXTBOOT"
> +
> +struct rom_extended_boot_data {
> +	char header[8];
> +	u32 num_components;
> +};
> +
>   #endif /* _ASM_ARCH_HARDWARE_H_ */
> diff --git a/arch/arm/mach-k3/include/mach/j721e_hardware.h b/arch/arm/mach-k3/include/mach/j721e_hardware.h
> index 19873d6e28..b98f0a82f1 100644
> --- a/arch/arm/mach-k3/include/mach/j721e_hardware.h
> +++ b/arch/arm/mach-k3/include/mach/j721e_hardware.h
> @@ -51,6 +51,9 @@
>   #define CTRLMMR_LOCK_KICK1				0x0100c
>   #define CTRLMMR_LOCK_KICK1_UNLOCK_VAL			0xd172bc5a
>   
> +/* ROM HANDOFF Structure location */
> +#define ROM_ENTENDED_BOOT_DATA_INFO			0x41cffb00
> +
>   /* MCU SCRATCHPAD usage */
>   #define TI_SRAM_SCRATCH_BOARD_EEPROM_START	CONFIG_SYS_K3_MCU_SCRATCHPAD_BASE
>   
> diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c
> index 63a31c18ce..6246de3a26 100644
> --- a/arch/arm/mach-k3/j721e_init.c
> +++ b/arch/arm/mach-k3/j721e_init.c
> @@ -126,10 +126,13 @@ void k3_mmc_restart_clock(void)
>    * it to the .data section.
>    */
>   u32 bootindex __attribute__((section(".data")));
> +static struct rom_extended_boot_data bootdata __section(.data);
>   
> -static void store_boot_index_from_rom(void)
> +static void store_boot_info_from_rom(void)
>   {
>   	bootindex = *(u32 *)(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX);
> +	memcpy(&bootdata, (uintptr_t *)ROM_ENTENDED_BOOT_DATA_INFO,
> +	       sizeof(struct rom_extended_boot_data));
>   }
>   
>   void board_init_f(ulong dummy)
> @@ -142,7 +145,7 @@ void board_init_f(ulong dummy)
>   	 * Cannot delay this further as there is a chance that
>   	 * K3_BOOT_PARAM_TABLE_INDEX can be over written by SPL MALLOC section.
>   	 */
> -	store_boot_index_from_rom();
> +	store_boot_info_from_rom();
>   
>   	/* Make all control module registers accessible */
>   	ctrl_mmr_unlock();
> 

[PATCH v2 11/18] arm: mach-k3: j7200: Detect if ROM has already loaded sysfw

[Lokesh Vutla]

Detect if sysfw is already loaded by ROM and pass this information to
sysfw loader. Based on this information sysfw loader either loads the
sysfw image from boot media or just received the boot notification
message form sysfw.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/mach-k3/common.c     | 8 ++++++++
 arch/arm/mach-k3/common.h     | 2 ++
 arch/arm/mach-k3/j721e_init.c | 3 ++-
 3 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c
index d065bdbc83..7b0369ffb0 100644
--- a/arch/arm/mach-k3/common.c
+++ b/arch/arm/mach-k3/common.c
@@ -71,6 +71,14 @@ void mmr_unlock(phys_addr_t base, u32 partition)
 	writel(CTRLMMR_LOCK_KICK1_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK1);
 }
 
+bool is_rom_loaded_sysfw(struct rom_extended_boot_data *data)
+{
+	if (strncmp(data->header, K3_ROM_BOOT_HEADER_MAGIC, 7))
+		return false;
+
+	return data->num_components > 1;
+}
+
 DECLARE_GLOBAL_DATA_PTR;
 
 #ifdef CONFIG_K3_EARLY_CONS
diff --git a/arch/arm/mach-k3/common.h b/arch/arm/mach-k3/common.h
index 8f5a5f323a..15a98fb653 100644
--- a/arch/arm/mach-k3/common.h
+++ b/arch/arm/mach-k3/common.h
@@ -7,6 +7,7 @@
  */
 
 #include <asm/armv7_mpu.h>
+#include <asm/hardware.h>
 
 #define AM65X	0xbb5a
 #define J721E	0xbb64
@@ -30,3 +31,4 @@ int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr);
 void k3_sysfw_print_ver(void);
 void spl_enable_dcache(void);
 void mmr_unlock(phys_addr_t base, u32 partition);
+bool is_rom_loaded_sysfw(struct rom_extended_boot_data *data);
diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c
index 6246de3a26..a36e4ed603 100644
--- a/arch/arm/mach-k3/j721e_init.c
+++ b/arch/arm/mach-k3/j721e_init.c
@@ -177,7 +177,8 @@ void board_init_f(ulong dummy)
 	 * callback hook, effectively switching on (or over) the console
 	 * output.
 	 */
-	k3_sysfw_loader(false, k3_mmc_stop_clock, k3_mmc_restart_clock);
+	k3_sysfw_loader(is_rom_loaded_sysfw(&bootdata),
+			k3_mmc_stop_clock, k3_mmc_restart_clock);
 
 	/* Prepare console output */
 	preloader_console_init();
-- 
2.27.0

[PATCH v2 11/18] arm: mach-k3: j7200: Detect if ROM has already loaded sysfw

[Suman Anna]

On 7/27/20 4:45 AM, Lokesh Vutla wrote:
> Detect if sysfw is already loaded by ROM and pass this information to
> sysfw loader. Based on this information sysfw loader either loads the
> sysfw image from boot media or just received the boot notification

%s/received/receives/

Pending the discussion on the argument list on k3_sysfw_loader(),

Reviewed-by: Suman Anna <s-anna@ti.com>

regards
Suman

> message form sysfw.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---
>   arch/arm/mach-k3/common.c     | 8 ++++++++
>   arch/arm/mach-k3/common.h     | 2 ++
>   arch/arm/mach-k3/j721e_init.c | 3 ++-
>   3 files changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm/mach-k3/common.c b/arch/arm/mach-k3/common.c
> index d065bdbc83..7b0369ffb0 100644
> --- a/arch/arm/mach-k3/common.c
> +++ b/arch/arm/mach-k3/common.c
> @@ -71,6 +71,14 @@ void mmr_unlock(phys_addr_t base, u32 partition)
>   	writel(CTRLMMR_LOCK_KICK1_UNLOCK_VAL, part_base + CTRLMMR_LOCK_KICK1);
>   }
>   
> +bool is_rom_loaded_sysfw(struct rom_extended_boot_data *data)
> +{
> +	if (strncmp(data->header, K3_ROM_BOOT_HEADER_MAGIC, 7))
> +		return false;
> +
> +	return data->num_components > 1;
> +}
> +
>   DECLARE_GLOBAL_DATA_PTR;
>   
>   #ifdef CONFIG_K3_EARLY_CONS
> diff --git a/arch/arm/mach-k3/common.h b/arch/arm/mach-k3/common.h
> index 8f5a5f323a..15a98fb653 100644
> --- a/arch/arm/mach-k3/common.h
> +++ b/arch/arm/mach-k3/common.h
> @@ -7,6 +7,7 @@
>    */
>   
>   #include <asm/armv7_mpu.h>
> +#include <asm/hardware.h>
>   
>   #define AM65X	0xbb5a
>   #define J721E	0xbb64
> @@ -30,3 +31,4 @@ int load_firmware(char *name_fw, char *name_loadaddr, u32 *loadaddr);
>   void k3_sysfw_print_ver(void);
>   void spl_enable_dcache(void);
>   void mmr_unlock(phys_addr_t base, u32 partition);
> +bool is_rom_loaded_sysfw(struct rom_extended_boot_data *data);
> diff --git a/arch/arm/mach-k3/j721e_init.c b/arch/arm/mach-k3/j721e_init.c
> index 6246de3a26..a36e4ed603 100644
> --- a/arch/arm/mach-k3/j721e_init.c
> +++ b/arch/arm/mach-k3/j721e_init.c
> @@ -177,7 +177,8 @@ void board_init_f(ulong dummy)
>   	 * callback hook, effectively switching on (or over) the console
>   	 * output.
>   	 */
> -	k3_sysfw_loader(false, k3_mmc_stop_clock, k3_mmc_restart_clock);
> +	k3_sysfw_loader(is_rom_loaded_sysfw(&bootdata),
> +			k3_mmc_stop_clock, k3_mmc_restart_clock);
>   
>   	/* Prepare console output */
>   	preloader_console_init();
> 

[PATCH v2 12/18] board: ti: j7200: Introduce support for j7200 build targets

[Lokesh Vutla]

j7200-evm has minor differences with j721e-evm based on the IPs
available in the SoC. Introduce separate build targets for j7200-evm
to incorporate the differences.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 board/ti/j721e/Kconfig | 53 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 53 insertions(+)

diff --git a/board/ti/j721e/Kconfig b/board/ti/j721e/Kconfig
index e56dc53bfa..2cbe2b2481 100644
--- a/board/ti/j721e/Kconfig
+++ b/board/ti/j721e/Kconfig
@@ -27,6 +27,26 @@ config TARGET_J721E_R5_EVM
 	imply SYS_K3_SPL_ATF
 	imply TI_I2C_BOARD_DETECT
 
+config TARGET_J7200_A72_EVM
+	bool "TI K3 based J7200 EVM running on A72"
+	select ARM64
+	select SOC_K3_J721E
+	select BOARD_LATE_INIT
+	imply TI_I2C_BOARD_DETECT
+	select SYS_DISABLE_DCACHE_OPS
+
+config TARGET_J7200_R5_EVM
+	bool "TI K3 based J7200 EVM running on R5"
+	select CPU_V7R
+	select SYS_THUMB_BUILD
+	select SOC_K3_J721E
+	select K3_LOAD_SYSFW
+	select RAM
+	select SPL_RAM
+	select K3_J721E_DDRSS
+	imply SYS_K3_SPL_ATF
+	imply TI_I2C_BOARD_DETECT
+
 endchoice
 
 if TARGET_J721E_A72_EVM
@@ -61,3 +81,36 @@ config SPL_LDSCRIPT
 source "board/ti/common/Kconfig"
 
 endif
+
+if TARGET_J7200_A72_EVM
+
+config SYS_BOARD
+       default "j721e"
+
+config SYS_VENDOR
+       default "ti"
+
+config SYS_CONFIG_NAME
+       default "j721e_evm"
+
+source "board/ti/common/Kconfig"
+
+endif
+
+if TARGET_J7200_R5_EVM
+
+config SYS_BOARD
+       default "j721e"
+
+config SYS_VENDOR
+       default "ti"
+
+config SYS_CONFIG_NAME
+       default "j721e_evm"
+
+config SPL_LDSCRIPT
+	default "arch/arm/mach-omap2/u-boot-spl.lds"
+
+source "board/ti/common/Kconfig"
+
+endif
-- 
2.27.0

[PATCH v2 12/18] board: ti: j7200: Introduce support for j7200 build targets

[Vignesh Raghavendra]

Hi

On 27/07/20 3:15 pm, Lokesh Vutla wrote:
> j7200-evm has minor differences with j721e-evm based on the IPs
> available in the SoC. Introduce separate build targets for j7200-evm
> to incorporate the differences.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---
>   board/ti/j721e/Kconfig | 53 ++++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 53 insertions(+)
> 
> diff --git a/board/ti/j721e/Kconfig b/board/ti/j721e/Kconfig
> index e56dc53bfa..2cbe2b2481 100644
> --- a/board/ti/j721e/Kconfig
> +++ b/board/ti/j721e/Kconfig
> @@ -27,6 +27,26 @@ config TARGET_J721E_R5_EVM
>   	imply SYS_K3_SPL_ATF
>   	imply TI_I2C_BOARD_DETECT
>   
> +config TARGET_J7200_A72_EVM
> +	bool "TI K3 based J7200 EVM running on A72"
> +	select ARM64
> +	select SOC_K3_J721E
> +	select BOARD_LATE_INIT
> +	imply TI_I2C_BOARD_DETECT
> +	select SYS_DISABLE_DCACHE_OPS
> +

I don't see update to:

    include/configs/j721e_evm.h          23 #ifdef CONFIG_TARGET_J721E_A72_EVM
    include/configs/j721e_evm.h         130 #ifdef CONFIG_TARGET_J721E_A72_EVM

Don't we need to update j721e_evm.h with TARGET_J7200_A72_EVM?

Regards
Vignesh

> +config TARGET_J7200_R5_EVM
> +	bool "TI K3 based J7200 EVM running on R5"
> +	select CPU_V7R
> +	select SYS_THUMB_BUILD
> +	select SOC_K3_J721E
> +	select K3_LOAD_SYSFW
> +	select RAM
> +	select SPL_RAM
> +	select K3_J721E_DDRSS
> +	imply SYS_K3_SPL_ATF
> +	imply TI_I2C_BOARD_DETECT
> +
>   endchoice
>   
>   if TARGET_J721E_A72_EVM
> @@ -61,3 +81,36 @@ config SPL_LDSCRIPT
>   source "board/ti/common/Kconfig"
>   
>   endif
> +
> +if TARGET_J7200_A72_EVM
> +
> +config SYS_BOARD
> +       default "j721e"
> +
> +config SYS_VENDOR
> +       default "ti"
> +
> +config SYS_CONFIG_NAME
> +       default "j721e_evm"
> +
> +source "board/ti/common/Kconfig"
> +
> +endif
> +
> +if TARGET_J7200_R5_EVM
> +
> +config SYS_BOARD
> +       default "j721e"
> +
> +config SYS_VENDOR
> +       default "ti"
> +
> +config SYS_CONFIG_NAME
> +       default "j721e_evm"
> +
> +config SPL_LDSCRIPT
> +	default "arch/arm/mach-omap2/u-boot-spl.lds"
> +
> +source "board/ti/common/Kconfig"
> +
> +endif
> 

[PATCH v2 12/18] board: ti: j7200: Introduce support for j7200 build targets

[Lokesh Vutla]

On 05/08/20 2:20 pm, Vignesh Raghavendra wrote:
> Hi
> 
> On 27/07/20 3:15 pm, Lokesh Vutla wrote:
>> j7200-evm has minor differences with j721e-evm based on the IPs
>> available in the SoC. Introduce separate build targets for j7200-evm
>> to incorporate the differences.
>>
>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
>> ---
>>   board/ti/j721e/Kconfig | 53 ++++++++++++++++++++++++++++++++++++++++++
>>   1 file changed, 53 insertions(+)
>>
>> diff --git a/board/ti/j721e/Kconfig b/board/ti/j721e/Kconfig
>> index e56dc53bfa..2cbe2b2481 100644
>> --- a/board/ti/j721e/Kconfig
>> +++ b/board/ti/j721e/Kconfig
>> @@ -27,6 +27,26 @@ config TARGET_J721E_R5_EVM
>>   	imply SYS_K3_SPL_ATF
>>   	imply TI_I2C_BOARD_DETECT
>>   
>> +config TARGET_J7200_A72_EVM
>> +	bool "TI K3 based J7200 EVM running on A72"
>> +	select ARM64
>> +	select SOC_K3_J721E
>> +	select BOARD_LATE_INIT
>> +	imply TI_I2C_BOARD_DETECT
>> +	select SYS_DISABLE_DCACHE_OPS
>> +
> 
> I don't see update to:
> 
>     include/configs/j721e_evm.h          23 #ifdef CONFIG_TARGET_J721E_A72_EVM
>     include/configs/j721e_evm.h         130 #ifdef CONFIG_TARGET_J721E_A72_EVM
> 
> Don't we need to update j721e_evm.h with TARGET_J7200_A72_EVM?


You are right. Will fix in v2.

Thanks and regards,
Lokesh

[PATCH v2 13/18] board: ti: j7200: Add board detection support for j7200

[Lokesh Vutla]

Add board detection support for j7200 common processor board.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
---
 board/ti/j721e/evm.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/board/ti/j721e/evm.c b/board/ti/j721e/evm.c
index 86e7cd4051..87cdbf9798 100644
--- a/board/ti/j721e/evm.c
+++ b/board/ti/j721e/evm.c
@@ -28,6 +28,8 @@
 #define board_is_j721e_som()	(board_ti_k3_is("J721EX-PM1-SOM") || \
 				 board_ti_k3_is("J721EX-PM2-SOM"))
 
+#define board_is_j7200_som()	board_ti_k3_is("J7200X-PM1-SOM")
+
 /* Max number of MAC addresses that are parsed/processed per daughter card */
 #define DAUGHTER_CARD_NO_OF_MAC_ADDR	8
 
@@ -139,6 +141,8 @@ static void setup_board_eeprom_env(void)
 
 	if (board_is_j721e_som())
 		name = "j721e";
+	else if (board_is_j7200_som())
+		name = "j7200";
 	else
 		printf("Unidentified board claims %s in eeprom header\n",
 		       board_ti_get_name());
-- 
2.27.0

[PATCH v2 13/18] board: ti: j7200: Add board detection support for j7200

[Suman Anna]

On 7/27/20 4:45 AM, Lokesh Vutla wrote:
> Add board detection support for j7200 common processor board.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> Signed-off-by: Dave Gerlach <d-gerlach@ti.com>

Reviewed-by: Suman Anna <s-anna@ti.com>

> ---
>   board/ti/j721e/evm.c | 4 ++++
>   1 file changed, 4 insertions(+)
> 
> diff --git a/board/ti/j721e/evm.c b/board/ti/j721e/evm.c
> index 86e7cd4051..87cdbf9798 100644
> --- a/board/ti/j721e/evm.c
> +++ b/board/ti/j721e/evm.c
> @@ -28,6 +28,8 @@
>   #define board_is_j721e_som()	(board_ti_k3_is("J721EX-PM1-SOM") || \
>   				 board_ti_k3_is("J721EX-PM2-SOM"))
>   
> +#define board_is_j7200_som()	board_ti_k3_is("J7200X-PM1-SOM")
> +
>   /* Max number of MAC addresses that are parsed/processed per daughter card */
>   #define DAUGHTER_CARD_NO_OF_MAC_ADDR	8
>   
> @@ -139,6 +141,8 @@ static void setup_board_eeprom_env(void)
>   
>   	if (board_is_j721e_som())
>   		name = "j721e";
> +	else if (board_is_j7200_som())
> +		name = "j7200";
>   	else
>   		printf("Unidentified board claims %s in eeprom header\n",
>   		       board_ti_get_name());
> 

[PATCH v2 14/18] ram: k3-j721e: Relax version checks for memory controller

[Lokesh Vutla]

k3-j721e ddr driver sanity checks for product id and version number.
Version number gets changed for every minor update in the IP. So discard
the version check and just sanity check for product id.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 drivers/ram/k3-j721e/lpddr4.c | 16 +---------------
 1 file changed, 1 insertion(+), 15 deletions(-)

diff --git a/drivers/ram/k3-j721e/lpddr4.c b/drivers/ram/k3-j721e/lpddr4.c
index 2c3892d8d7..fc80fb1e2c 100644
--- a/drivers/ram/k3-j721e/lpddr4.c
+++ b/drivers/ram/k3-j721e/lpddr4.c
@@ -199,7 +199,6 @@ uint32_t lpddr4_init(lpddr4_privatedata * pd, const lpddr4_config * cfg)
 {
 	uint32_t result = 0U;
 	uint16_t productid = 0U;
-	uint32_t version[2] = { 0, 0 };
 
 	result = lpddr4_initsf(pd, cfg);
 	if (result == (uint32_t) CDN_EOK) {
@@ -209,20 +208,7 @@ uint32_t lpddr4_init(lpddr4_privatedata * pd, const lpddr4_config * cfg)
 						     CPS_REG_READ(&
 								  (ctlregbase->
 								   LPDDR4__CONTROLLER_ID__REG))));
-		version[0] =
-		    (uint32_t) (CPS_FLD_READ
-				(LPDDR4__CONTROLLER_VERSION_0__FLD,
-				 CPS_REG_READ(&
-					      (ctlregbase->
-					       LPDDR4__CONTROLLER_VERSION_0__REG))));
-		version[1] =
-		    (uint32_t) (CPS_FLD_READ
-				(LPDDR4__CONTROLLER_VERSION_1__FLD,
-				 CPS_REG_READ(&
-					      (ctlregbase->
-					       LPDDR4__CONTROLLER_VERSION_1__REG))));
-		if ((productid == PRODUCT_ID) && (version[0] == VERSION_0)
-		    && (version[1] == VERSION_1)) {
+		if (productid == PRODUCT_ID) {
 			/* Populating configuration data to pD */
 			pd->ctlbase = ctlregbase;
 			pd->infohandler =
-- 
2.27.0

[PATCH v2 15/18] arm: dts: k3-j7200: Add dts support

[Lokesh Vutla]

Add the basic a72 dts for j7200. Following nodes were supported:
- UART
- MMC SD
- I2C
- TISCI communication

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
---
 arch/arm/dts/Makefile                         |   3 +-
 .../k3-j7200-common-proc-board-u-boot.dtsi    |  92 +++++
 arch/arm/dts/k3-j7200-common-proc-board.dts   |  94 ++++++
 arch/arm/dts/k3-j7200-main.dtsi               | 313 ++++++++++++++++++
 arch/arm/dts/k3-j7200-mcu-wakeup.dtsi         | 117 +++++++
 arch/arm/dts/k3-j7200-som-p0.dtsi             |  29 ++
 arch/arm/dts/k3-j7200.dtsi                    | 175 ++++++++++
 7 files changed, 822 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
 create mode 100644 arch/arm/dts/k3-j7200-common-proc-board.dts
 create mode 100644 arch/arm/dts/k3-j7200-main.dtsi
 create mode 100644 arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
 create mode 100644 arch/arm/dts/k3-j7200-som-p0.dtsi
 create mode 100644 arch/arm/dts/k3-j7200.dtsi

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index cee10f533f..08717ea197 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -938,7 +938,8 @@ dtb-$(CONFIG_STM32MP15x) += \
 
 dtb-$(CONFIG_SOC_K3_AM6) += k3-am654-base-board.dtb k3-am654-r5-base-board.dtb
 dtb-$(CONFIG_SOC_K3_J721E) += k3-j721e-common-proc-board.dtb \
-			      k3-j721e-r5-common-proc-board.dtb
+			      k3-j721e-r5-common-proc-board.dtb \
+			      k3-j7200-common-proc-board.dtb
 
 dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt7622-rfb.dtb \
diff --git a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
new file mode 100644
index 0000000000..593417565e
--- /dev/null
+++ b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
@@ -0,0 +1,92 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+		tick-timer = &timer1;
+	};
+
+};
+
+&chipid {
+	u-boot,dm-spl;
+};
+
+&cbass_main {
+	u-boot,dm-spl;
+};
+
+&main_navss {
+	u-boot,dm-spl;
+};
+
+&cbass_mcu_wakeup {
+	u-boot,dm-spl;
+
+	timer1: timer at 40400000 {
+		compatible = "ti,omap5430-timer";
+		reg = <0x0 0x40400000 0x0 0x80>;
+		ti,timer-alwon;
+		clock-frequency = <25000000>;
+		u-boot,dm-spl;
+	};
+};
+
+&secure_proxy_main {
+	u-boot,dm-spl;
+};
+
+&dmsc {
+	u-boot,dm-spl;
+	k3_sysreset: sysreset-controller {
+		compatible = "ti,sci-sysreset";
+		u-boot,dm-spl;
+	};
+};
+
+&k3_pds {
+	u-boot,dm-spl;
+};
+
+&k3_clks {
+	u-boot,dm-spl;
+};
+
+&k3_reset {
+	u-boot,dm-spl;
+};
+
+&wkup_pmx0 {
+	u-boot,dm-spl;
+};
+
+&main_pmx0 {
+	u-boot,dm-spl;
+};
+
+&main_uart0 {
+	u-boot,dm-spl;
+};
+
+&mcu_uart0 {
+	u-boot,dm-spl;
+};
+
+&main_sdhci0 {
+	u-boot,dm-spl;
+};
+
+&main_sdhci1 {
+	u-boot,dm-spl;
+};
+
+&wkup_i2c0_pins_default {
+	u-boot,dm-spl;
+};
+
+&wkup_i2c0 {
+	u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/k3-j7200-common-proc-board.dts b/arch/arm/dts/k3-j7200-common-proc-board.dts
new file mode 100644
index 0000000000..3f33fb5650
--- /dev/null
+++ b/arch/arm/dts/k3-j7200-common-proc-board.dts
@@ -0,0 +1,94 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j7200-som-p0.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
+	};
+};
+
+&wkup_pmx0 {
+	wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x100, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */
+			J721E_WKUP_IOPAD(0x104, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by System firmware */
+	status = "disabled";
+};
+
+&main_uart0 {
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+};
+
+&main_uart2 {
+	/* MAIN UART 2 is used by R5F firmware */
+	status = "disabled";
+};
+
+&main_uart3 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart4 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart5 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart6 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart7 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart8 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart9 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&wkup_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_i2c0_pins_default>;
+	clock-frequency = <400000>;
+};
+
+&main_sdhci0 {
+	/* eMMC */
+	non-removable;
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+};
+
+&main_sdhci1 {
+	/* SD card */
+	ti,driver-strength-ohm = <50>;
+	disable-wp;
+	no-1-8-v;
+	sdhci-caps-mask = <0x8000000F 0x0>;
+};
diff --git a/arch/arm/dts/k3-j7200-main.dtsi b/arch/arm/dts/k3-j7200-main.dtsi
new file mode 100644
index 0000000000..f3df5d8f10
--- /dev/null
+++ b/arch/arm/dts/k3-j7200-main.dtsi
@@ -0,0 +1,313 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_main {
+	msmc_ram: sram at 70000000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x70000000 0x0 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x70000000 0x100000>;
+
+		atf-sram at 0 {
+			reg = <0x0 0x20000>;
+		};
+	};
+
+	gic500: interrupt-controller at 1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01900000 0x00 0x100000>;	/* GICR */
+
+		/* vcpumntirq: virtual CPU interface maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: msi-controller at 1820000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	main_navss: navss at 30000000 {
+		compatible = "simple-mfd";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>;
+
+		secure_proxy_main: mailbox at 32c00000 {
+			compatible = "ti,am654-secure-proxy";
+			#mbox-cells = <1>;
+			reg-names = "target_data", "rt", "scfg";
+			reg = <0x00 0x32c00000 0x00 0x100000>,
+			      <0x00 0x32400000 0x00 0x100000>,
+			      <0x00 0x32800000 0x00 0x100000>;
+			interrupt-names = "rx_011";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	main_pmx0: pinmux at 11c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x0 0x11c000 0x0 0x2b4>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_uart0: serial at 2800000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 146 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 146 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart1: serial at 2810000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 278 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart2: serial at 2820000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 279 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart3: serial at 2830000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 280 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 280 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart4: serial at 2840000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 281 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 281 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart5: serial at 2850000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 282 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 282 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart6: serial at 2860000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 283 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart7: serial at 2870000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02870000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 284 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 284 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart8: serial at 2880000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02880000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 285 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 285 2>;
+		clock-names = "fclk";
+	};
+
+	main_uart9: serial at 2890000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02890000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 286 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 286 2>;
+		clock-names = "fclk";
+	};
+
+	main_sdhci0: sdhci at 4f80000 {
+		compatible = "ti,j721e-sdhci-8bit";
+		reg = <0x0 0x04f80000 0x0 0x260>, <0x0 0x4f88000 0x0 0x134>;
+		interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 91 TI_SCI_PD_EXCLUSIVE>;
+		clock-names = "clk_xin", "clk_ahb";
+		clocks = <&k3_clks 91 3>, <&k3_clks 91 0>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
+		ti,otap-del-sel-ddr52 = <0x6>;
+		ti,otap-del-sel-hs200 = <0x8>;
+		ti,otap-del-sel-hs400 = <0x0>;
+		ti,strobe-sel = <0x77>;
+		ti,trm-icp = <0x8>;
+		bus-width = <8>;
+		mmc-hs200-1_8v;
+		mmc-ddr-1_8v;
+		dma-coherent;
+	};
+
+	main_sdhci1: sdhci at 4fb0000 {
+		compatible = "ti,j721e-sdhci-4bit";
+		reg = <0x0 0x04fb0000 0x0 0x260>, <0x0 0x4fb8000 0x0 0x134>;
+		interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&k3_pds 92 TI_SCI_PD_EXCLUSIVE>;
+		clock-names = "clk_xin", "clk_ahb";
+		clocks = <&k3_clks 92 2>, <&k3_clks 92 1>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x5>;
+		ti,otap-del-sel-ddr50 = <0xc>;
+		dma-coherent;
+	};
+
+	main_i2c0: i2c at 2000000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2000000 0x0 0x100>;
+		interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 187 1>;
+		power-domains = <&k3_pds 187 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c1: i2c at 2010000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2010000 0x0 0x100>;
+		interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 188 1>;
+		power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c2: i2c at 2020000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2020000 0x0 0x100>;
+		interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 189 1>;
+		power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c3: i2c at 2030000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2030000 0x0 0x100>;
+		interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 190 1>;
+		power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c4: i2c at 2040000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2040000 0x0 0x100>;
+		interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 191 1>;
+		power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c5: i2c at 2050000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2050000 0x0 0x100>;
+		interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 192 1>;
+		power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	main_i2c6: i2c at 2060000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x2060000 0x0 0x100>;
+		interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 193 1>;
+		power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>;
+	};
+};
diff --git a/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
new file mode 100644
index 0000000000..4bcb65aace
--- /dev/null
+++ b/arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family MCU/WAKEUP Domain peripherals
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&cbass_mcu_wakeup {
+	dmsc: dmsc at 44083000 {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+
+		mbox-names = "rx", "tx";
+
+		mboxes= <&secure_proxy_main 11>,
+			<&secure_proxy_main 13>;
+
+		reg-names = "debug_messages";
+		reg = <0x00 0x44083000 0x0 0x1000>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <2>;
+		};
+
+		k3_clks: clocks {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	chipid: chipid at 43000014 {
+		compatible = "ti,am654-chipid";
+		reg = <0x0 0x43000014 0x0 0x4>;
+	};
+
+	wkup_pmx0: pinmux at 4301c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c000 0x00 0x178>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	mcu_ram: sram at 41c00000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x41c00000 0x00 0x100000>;
+		ranges = <0x0 0x00 0x41c00000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	wkup_uart0: serial at 42300000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x42300000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 287 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 287 2>;
+		clock-names = "fclk";
+	};
+
+	wkup_i2c0: i2c at 42120000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x42120000 0x0 0x100>;
+		interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 197 1>;
+		power-domains = <&k3_pds 197 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcu_uart0: serial at 40a00000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x40a00000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <96000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 149 TI_SCI_PD_EXCLUSIVE>;
+		clocks = <&k3_clks 149 2>;
+		clock-names = "fclk";
+	};
+
+	mcu_i2c0: i2c at 40b00000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x40b00000 0x0 0x100>;
+		interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 194 1>;
+		power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>;
+	};
+
+	mcu_i2c1: i2c at 40b10000 {
+		compatible = "ti,j721e-i2c", "ti,omap4-i2c";
+		reg = <0x0 0x40b10000 0x0 0x100>;
+		interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-names = "fck";
+		clocks = <&k3_clks 195 1>;
+		power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>;
+	};
+};
diff --git a/arch/arm/dts/k3-j7200-som-p0.dtsi b/arch/arm/dts/k3-j7200-som-p0.dtsi
new file mode 100644
index 0000000000..22fc50bd5c
--- /dev/null
+++ b/arch/arm/dts/k3-j7200-som-p0.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j7200.dtsi"
+
+/ {
+	memory at 80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee at 9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+};
diff --git a/arch/arm/dts/k3-j7200.dtsi b/arch/arm/dts/k3-j7200.dtsi
new file mode 100644
index 0000000000..7b2313dcab
--- /dev/null
+++ b/arch/arm/dts/k3-j7200.dtsi
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J7200 SoC Family
+ *
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/k3.h>
+#include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+/ {
+	model = "Texas Instruments K3 J7200 SoC";
+	compatible = "ti,j7200";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		serial4 = &main_uart2;
+		serial5 = &main_uart3;
+		serial6 = &main_uart4;
+		serial7 = &main_uart5;
+		serial8 = &main_uart6;
+		serial9 = &main_uart7;
+		serial10 = &main_uart8;
+		serial11 = &main_uart9;
+		i2c0 = &wkup_i2c0;
+		i2c1 = &mcu_i2c0;
+		i2c2 = &mcu_i2c1;
+		i2c3 = &main_i2c0;
+		i2c4 = &main_i2c1;
+		i2c5 = &main_i2c2;
+		i2c6 = &main_i2c3;
+		i2c7 = &main_i2c4;
+		i2c8 = &main_i2c5;
+		i2c9 = &main_i2c6;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+		};
+
+		cpu0: cpu at 0 {
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu at 1 {
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <2048>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a72_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: bus at 100000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0d000000>, /* Most peripherals */
+			 <0x00 0x30000000 0x00 0x30000000 0x00 0x0c400000>, /* MAIN NAVSS */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
+			 <0x41 0x00000000 0x41 0x00000000 0x01 0x00000000>, /* PCIe1 DAT */
+
+			 /* MCUSS_WKUP Range */
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
+			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>;
+
+		cbass_mcu_wakeup: bus at 28380000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>; /* FSS OSPI0/1 data region 0 */
+		};
+	};
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-j7200-main.dtsi"
+#include "k3-j7200-mcu-wakeup.dtsi"
-- 
2.27.0

[PATCH v2 15/18] arm: dts: k3-j7200: Add dts support

[Vignesh Raghavendra]

Hi Lokesh,

On 27/07/20 3:15 pm, Lokesh Vutla wrote:
> Add the basic a72 dts for j7200. Following nodes were supported:
> - UART
> - MMC SD
> - I2C
> - TISCI communication
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
> Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
> ---
>   arch/arm/dts/Makefile                         |   3 +-
>   .../k3-j7200-common-proc-board-u-boot.dtsi    |  92 +++++
>   arch/arm/dts/k3-j7200-common-proc-board.dts   |  94 ++++++
>   arch/arm/dts/k3-j7200-main.dtsi               | 313 ++++++++++++++++++
>   arch/arm/dts/k3-j7200-mcu-wakeup.dtsi         | 117 +++++++
>   arch/arm/dts/k3-j7200-som-p0.dtsi             |  29 ++
>   arch/arm/dts/k3-j7200.dtsi                    | 175 ++++++++++
>   7 files changed, 822 insertions(+), 1 deletion(-)
>   create mode 100644 arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
>   create mode 100644 arch/arm/dts/k3-j7200-common-proc-board.dts
>   create mode 100644 arch/arm/dts/k3-j7200-main.dtsi
>   create mode 100644 arch/arm/dts/k3-j7200-mcu-wakeup.dtsi
>   create mode 100644 arch/arm/dts/k3-j7200-som-p0.dtsi
>   create mode 100644 arch/arm/dts/k3-j7200.dtsi
> 


This patch is missing IO expander nodes that are used by MMC/SD (same is present in 16/18)
Could you squash the below diff into this patch while merging/reposting?

--><8--

diff --git a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
index 593417565e..10bb069492 100644
--- a/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
+++ b/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
@@ -90,3 +90,15 @@
 &wkup_i2c0 {
 	u-boot,dm-spl;
 };
+
+&main_i2c0 {
+	u-boot,dm-spl;
+};
+
+&main_i2c0_pins_default {
+	u-boot,dm-spl;
+};
+
+&exp2 {
+	u-boot,dm-spl;
+};
diff --git a/arch/arm/dts/k3-j7200-common-proc-board.dts b/arch/arm/dts/k3-j7200-common-proc-board.dts
index 3f33fb5650..537ef2a79d 100644
--- a/arch/arm/dts/k3-j7200-common-proc-board.dts
+++ b/arch/arm/dts/k3-j7200-common-proc-board.dts
@@ -23,6 +23,15 @@
 	};
 };
 
+&main_pmx0 {
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
+			J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
+		>;
+	};
+};
+
 &wkup_uart0 {
 	/* Wakeup UART is used by System firmware */
 	status = "disabled";
@@ -92,3 +101,23 @@
 	no-1-8-v;
 	sdhci-caps-mask = <0x8000000F 0x0>;
 };
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio at 20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	exp2: gpio at 22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};

[...]

[PATCH v2 16/18] arm: dts: k3-j7200: Add R5 specific dts support

[Lokesh Vutla]

From: Dave Gerlach <d-gerlach@ti.com>

Add the basic a72 basic dts for j7200. Following nodes were supported:
- UART
- MMC SD
- I2C
- TISCI communication
- LPDDR with 1600MTs configuration.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
---
 arch/arm/dts/Makefile                         |    3 +-
 arch/arm/dts/k3-j7200-ddr-evm-lp4-1600.dtsi   | 2195 +++++++++++++++++
 .../arm/dts/k3-j7200-r5-common-proc-board.dts |  199 ++
 3 files changed, 2396 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/k3-j7200-ddr-evm-lp4-1600.dtsi
 create mode 100644 arch/arm/dts/k3-j7200-r5-common-proc-board.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 08717ea197..cdca20206f 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -939,7 +939,8 @@ dtb-$(CONFIG_STM32MP15x) += \
 dtb-$(CONFIG_SOC_K3_AM6) += k3-am654-base-board.dtb k3-am654-r5-base-board.dtb
 dtb-$(CONFIG_SOC_K3_J721E) += k3-j721e-common-proc-board.dtb \
 			      k3-j721e-r5-common-proc-board.dtb \
-			      k3-j7200-common-proc-board.dtb
+			      k3-j7200-common-proc-board.dtb \
+			      k3-j7200-r5-common-proc-board.dtb
 
 dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt7622-rfb.dtb \
diff --git a/arch/arm/dts/k3-j7200-ddr-evm-lp4-1600.dtsi b/arch/arm/dts/k3-j7200-ddr-evm-lp4-1600.dtsi
new file mode 100644
index 0000000000..12ffd913d1
--- /dev/null
+++ b/arch/arm/dts/k3-j7200-ddr-evm-lp4-1600.dtsi
@@ -0,0 +1,2195 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * This file was generated by the AM752x_DRA82x_TDA4x_DDRSS_RegConfigTool, Revision: 0.3.0
+ * This file was generated on 06/08/2020
+ * Includes hand edits
+ */
+
+#define DDRSS_PLL_FHS_CNT 10
+#define DDRSS_PLL_FREQUENCY_1 400000000
+#define DDRSS_PLL_FREQUENCY_2 400000000
+
+#define DDRSS_CTL_00_DATA 0x00000B00
+#define DDRSS_CTL_01_DATA 0x00000000
+#define DDRSS_CTL_02_DATA 0x00000000
+#define DDRSS_CTL_03_DATA 0x00000000
+#define DDRSS_CTL_04_DATA 0x00000000
+#define DDRSS_CTL_05_DATA 0x00000000
+#define DDRSS_CTL_06_DATA 0x00000000
+#define DDRSS_CTL_07_DATA 0x00002710
+#define DDRSS_CTL_08_DATA 0x000186A0
+#define DDRSS_CTL_09_DATA 0x00000005
+#define DDRSS_CTL_10_DATA 0x00000064
+#define DDRSS_CTL_11_DATA 0x00027100
+#define DDRSS_CTL_12_DATA 0x00186A00
+#define DDRSS_CTL_13_DATA 0x00000005
+#define DDRSS_CTL_14_DATA 0x00000640
+#define DDRSS_CTL_15_DATA 0x00027100
+#define DDRSS_CTL_16_DATA 0x00186A00
+#define DDRSS_CTL_17_DATA 0x00000005
+#define DDRSS_CTL_18_DATA 0x00000640
+#define DDRSS_CTL_19_DATA 0x01010000
+#define DDRSS_CTL_20_DATA 0x02011001
+#define DDRSS_CTL_21_DATA 0x02010000
+#define DDRSS_CTL_22_DATA 0x00020100
+#define DDRSS_CTL_23_DATA 0x0000000A
+#define DDRSS_CTL_24_DATA 0x00000019
+#define DDRSS_CTL_25_DATA 0x00000000
+#define DDRSS_CTL_26_DATA 0x00000000
+#define DDRSS_CTL_27_DATA 0x02020200
+#define DDRSS_CTL_28_DATA 0x00002020
+#define DDRSS_CTL_29_DATA 0x00100000
+#define DDRSS_CTL_30_DATA 0x00000000
+#define DDRSS_CTL_31_DATA 0x00000000
+#define DDRSS_CTL_32_DATA 0x00000000
+#define DDRSS_CTL_33_DATA 0x00000000
+#define DDRSS_CTL_34_DATA 0x040C0000
+#define DDRSS_CTL_35_DATA 0x081C081C
+#define DDRSS_CTL_36_DATA 0x00050804
+#define DDRSS_CTL_37_DATA 0x09040008
+#define DDRSS_CTL_38_DATA 0x08000204
+#define DDRSS_CTL_39_DATA 0x0B240034
+#define DDRSS_CTL_40_DATA 0x08001910
+#define DDRSS_CTL_41_DATA 0x0B240034
+#define DDRSS_CTL_42_DATA 0x20001910
+#define DDRSS_CTL_43_DATA 0x000A0A09
+#define DDRSS_CTL_44_DATA 0x040006DB
+#define DDRSS_CTL_45_DATA 0x0C0A0904
+#define DDRSS_CTL_46_DATA 0x06006DB0
+#define DDRSS_CTL_47_DATA 0x0C0A0906
+#define DDRSS_CTL_48_DATA 0x06006DB0
+#define DDRSS_CTL_49_DATA 0x02030406
+#define DDRSS_CTL_50_DATA 0x11040500
+#define DDRSS_CTL_51_DATA 0x08121112
+#define DDRSS_CTL_52_DATA 0x14000D0A
+#define DDRSS_CTL_53_DATA 0x02010A0A
+#define DDRSS_CTL_54_DATA 0x01010002
+#define DDRSS_CTL_55_DATA 0x04222208
+#define DDRSS_CTL_56_DATA 0x04131304
+#define DDRSS_CTL_57_DATA 0x00001313
+#define DDRSS_CTL_58_DATA 0x00010100
+#define DDRSS_CTL_59_DATA 0x03010000
+#define DDRSS_CTL_60_DATA 0x00000E08
+#define DDRSS_CTL_61_DATA 0x000000BB
+#define DDRSS_CTL_62_DATA 0x000000E0
+#define DDRSS_CTL_63_DATA 0x00000C28
+#define DDRSS_CTL_64_DATA 0x000000E0
+#define DDRSS_CTL_65_DATA 0x00000C28
+#define DDRSS_CTL_66_DATA 0x00000005
+#define DDRSS_CTL_67_DATA 0x00030000
+#define DDRSS_CTL_68_DATA 0x00380010
+#define DDRSS_CTL_69_DATA 0x0038017E
+#define DDRSS_CTL_70_DATA 0x0040017E
+#define DDRSS_CTL_71_DATA 0x00120103
+#define DDRSS_CTL_72_DATA 0x00060005
+#define DDRSS_CTL_73_DATA 0x14080006
+#define DDRSS_CTL_74_DATA 0x05050114
+#define DDRSS_CTL_75_DATA 0x0201030A
+#define DDRSS_CTL_76_DATA 0x030C0605
+#define DDRSS_CTL_77_DATA 0x06050201
+#define DDRSS_CTL_78_DATA 0x0001030C
+#define DDRSS_CTL_79_DATA 0x000F000F
+#define DDRSS_CTL_80_DATA 0x00E600E6
+#define DDRSS_CTL_81_DATA 0x00E600E6
+#define DDRSS_CTL_82_DATA 0x03050505
+#define DDRSS_CTL_83_DATA 0x03010303
+#define DDRSS_CTL_84_DATA 0x0C050605
+#define DDRSS_CTL_85_DATA 0x03020603
+#define DDRSS_CTL_86_DATA 0x0C050605
+#define DDRSS_CTL_87_DATA 0x03020603
+#define DDRSS_CTL_88_DATA 0x03010000
+#define DDRSS_CTL_89_DATA 0x00010000
+#define DDRSS_CTL_90_DATA 0x00000000
+#define DDRSS_CTL_91_DATA 0x00000000
+#define DDRSS_CTL_92_DATA 0x01000000
+#define DDRSS_CTL_93_DATA 0x80104002
+#define DDRSS_CTL_94_DATA 0x00000000
+#define DDRSS_CTL_95_DATA 0x00040005
+#define DDRSS_CTL_96_DATA 0x00000000
+#define DDRSS_CTL_97_DATA 0x00050000
+#define DDRSS_CTL_98_DATA 0x00000004
+#define DDRSS_CTL_99_DATA 0x00000000
+#define DDRSS_CTL_100_DATA 0x00040005
+#define DDRSS_CTL_101_DATA 0x00000000
+#define DDRSS_CTL_102_DATA 0x00002EC0
+#define DDRSS_CTL_103_DATA 0x00002EC0
+#define DDRSS_CTL_104_DATA 0x00002EC0
+#define DDRSS_CTL_105_DATA 0x00002EC0
+#define DDRSS_CTL_106_DATA 0x00002EC0
+#define DDRSS_CTL_107_DATA 0x00000000
+#define DDRSS_CTL_108_DATA 0x0000051D
+#define DDRSS_CTL_109_DATA 0x00030A00
+#define DDRSS_CTL_110_DATA 0x00030A00
+#define DDRSS_CTL_111_DATA 0x00030A00
+#define DDRSS_CTL_112_DATA 0x00030A00
+#define DDRSS_CTL_113_DATA 0x00030A00
+#define DDRSS_CTL_114_DATA 0x00000000
+#define DDRSS_CTL_115_DATA 0x00005518
+#define DDRSS_CTL_116_DATA 0x00030A00
+#define DDRSS_CTL_117_DATA 0x00030A00
+#define DDRSS_CTL_118_DATA 0x00030A00
+#define DDRSS_CTL_119_DATA 0x00030A00
+#define DDRSS_CTL_120_DATA 0x00030A00
+#define DDRSS_CTL_121_DATA 0x00000000
+#define DDRSS_CTL_122_DATA 0x00005518
+#define DDRSS_CTL_123_DATA 0x00000000
+#define DDRSS_CTL_124_DATA 0x00000000
+#define DDRSS_CTL_125_DATA 0x00000000
+#define DDRSS_CTL_126_DATA 0x00000000
+#define DDRSS_CTL_127_DATA 0x00000000
+#define DDRSS_CTL_128_DATA 0x00000000
+#define DDRSS_CTL_129_DATA 0x00000000
+#define DDRSS_CTL_130_DATA 0x00000000
+#define DDRSS_CTL_131_DATA 0x05030500
+#define DDRSS_CTL_132_DATA 0x00030503
+#define DDRSS_CTL_133_DATA 0x0A090000
+#define DDRSS_CTL_134_DATA 0x0A090701
+#define DDRSS_CTL_135_DATA 0x0900000E
+#define DDRSS_CTL_136_DATA 0x0907010A
+#define DDRSS_CTL_137_DATA 0x00000E0A
+#define DDRSS_CTL_138_DATA 0x07010A09
+#define DDRSS_CTL_139_DATA 0x000E0A09
+#define DDRSS_CTL_140_DATA 0x07000401
+#define DDRSS_CTL_141_DATA 0x00000000
+#define DDRSS_CTL_142_DATA 0x00000000
+#define DDRSS_CTL_143_DATA 0x00000000
+#define DDRSS_CTL_144_DATA 0x00000000
+#define DDRSS_CTL_145_DATA 0x00000000
+#define DDRSS_CTL_146_DATA 0x00000000
+#define DDRSS_CTL_147_DATA 0x00000000
+#define DDRSS_CTL_148_DATA 0x08080000
+#define DDRSS_CTL_149_DATA 0x01000000
+#define DDRSS_CTL_150_DATA 0x800000C0
+#define DDRSS_CTL_151_DATA 0x800000C0
+#define DDRSS_CTL_152_DATA 0x800000C0
+#define DDRSS_CTL_153_DATA 0x00000000
+#define DDRSS_CTL_154_DATA 0x00001500
+#define DDRSS_CTL_155_DATA 0x00000000
+#define DDRSS_CTL_156_DATA 0x00000001
+#define DDRSS_CTL_157_DATA 0x00000002
+#define DDRSS_CTL_158_DATA 0x0000100E
+#define DDRSS_CTL_159_DATA 0x00000000
+#define DDRSS_CTL_160_DATA 0x00000000
+#define DDRSS_CTL_161_DATA 0x00000000
+#define DDRSS_CTL_162_DATA 0x00000000
+#define DDRSS_CTL_163_DATA 0x00000000
+#define DDRSS_CTL_164_DATA 0x000A0000
+#define DDRSS_CTL_165_DATA 0x000D0005
+#define DDRSS_CTL_166_DATA 0x000D0404
+#define DDRSS_CTL_167_DATA 0x005000A0
+#define DDRSS_CTL_168_DATA 0x060600C8
+#define DDRSS_CTL_169_DATA 0x00A000C8
+#define DDRSS_CTL_170_DATA 0x00C80050
+#define DDRSS_CTL_171_DATA 0x00C80606
+#define DDRSS_CTL_172_DATA 0x00000000
+#define DDRSS_CTL_173_DATA 0x00000000
+#define DDRSS_CTL_174_DATA 0x00000000
+#define DDRSS_CTL_175_DATA 0x12A40084
+#define DDRSS_CTL_176_DATA 0x2B0012A4
+#define DDRSS_CTL_177_DATA 0x00002B2B
+#define DDRSS_CTL_178_DATA 0x36000000
+#define DDRSS_CTL_179_DATA 0x27270036
+#define DDRSS_CTL_180_DATA 0x0F0F0000
+#define DDRSS_CTL_181_DATA 0x00000000
+#define DDRSS_CTL_182_DATA 0x00841515
+#define DDRSS_CTL_183_DATA 0x12A412A4
+#define DDRSS_CTL_184_DATA 0x2B2B2B00
+#define DDRSS_CTL_185_DATA 0x00000000
+#define DDRSS_CTL_186_DATA 0x00363600
+#define DDRSS_CTL_187_DATA 0x00002727
+#define DDRSS_CTL_188_DATA 0x00000F0F
+#define DDRSS_CTL_189_DATA 0x15150000
+#define DDRSS_CTL_190_DATA 0x00000020
+#define DDRSS_CTL_191_DATA 0x00000000
+#define DDRSS_CTL_192_DATA 0x00000001
+#define DDRSS_CTL_193_DATA 0x00000000
+#define DDRSS_CTL_194_DATA 0x01000000
+#define DDRSS_CTL_195_DATA 0x00000001
+#define DDRSS_CTL_196_DATA 0x00000000
+#define DDRSS_CTL_197_DATA 0x00000000
+#define DDRSS_CTL_198_DATA 0x00000000
+#define DDRSS_CTL_199_DATA 0x00000000
+#define DDRSS_CTL_200_DATA 0x00000000
+#define DDRSS_CTL_201_DATA 0x00000000
+#define DDRSS_CTL_202_DATA 0x00000000
+#define DDRSS_CTL_203_DATA 0x00000000
+#define DDRSS_CTL_204_DATA 0x00000000
+#define DDRSS_CTL_205_DATA 0x00000000
+#define DDRSS_CTL_206_DATA 0x02000000
+#define DDRSS_CTL_207_DATA 0x01080101
+#define DDRSS_CTL_208_DATA 0x00000000
+#define DDRSS_CTL_209_DATA 0x00000000
+#define DDRSS_CTL_210_DATA 0x00000000
+#define DDRSS_CTL_211_DATA 0x00000000
+#define DDRSS_CTL_212_DATA 0x00000000
+#define DDRSS_CTL_213_DATA 0x00000000
+#define DDRSS_CTL_214_DATA 0x00000000
+#define DDRSS_CTL_215_DATA 0x00000000
+#define DDRSS_CTL_216_DATA 0x00000000
+#define DDRSS_CTL_217_DATA 0x00000000
+#define DDRSS_CTL_218_DATA 0x00000000
+#define DDRSS_CTL_219_DATA 0x00000000
+#define DDRSS_CTL_220_DATA 0x00000000
+#define DDRSS_CTL_221_DATA 0x00000000
+#define DDRSS_CTL_222_DATA 0x00001000
+#define DDRSS_CTL_223_DATA 0x006403E8
+#define DDRSS_CTL_224_DATA 0x00000000
+#define DDRSS_CTL_225_DATA 0x00000000
+#define DDRSS_CTL_226_DATA 0x00000000
+#define DDRSS_CTL_227_DATA 0x15110000
+#define DDRSS_CTL_228_DATA 0x00040C18
+#define DDRSS_CTL_229_DATA 0x00000000
+#define DDRSS_CTL_230_DATA 0x00000000
+#define DDRSS_CTL_231_DATA 0x00000000
+#define DDRSS_CTL_232_DATA 0x00000000
+#define DDRSS_CTL_233_DATA 0x00000000
+#define DDRSS_CTL_234_DATA 0x00000000
+#define DDRSS_CTL_235_DATA 0x00000000
+#define DDRSS_CTL_236_DATA 0x00000000
+#define DDRSS_CTL_237_DATA 0x00000000
+#define DDRSS_CTL_238_DATA 0x00000000
+#define DDRSS_CTL_239_DATA 0x00000000
+#define DDRSS_CTL_240_DATA 0x00000000
+#define DDRSS_CTL_241_DATA 0x00000000
+#define DDRSS_CTL_242_DATA 0x00030000
+#define DDRSS_CTL_243_DATA 0x00000000
+#define DDRSS_CTL_244_DATA 0x00000000
+#define DDRSS_CTL_245_DATA 0x00000000
+#define DDRSS_CTL_246_DATA 0x00000000
+#define DDRSS_CTL_247_DATA 0x00000000
+#define DDRSS_CTL_248_DATA 0x00000000
+#define DDRSS_CTL_249_DATA 0x00000000
+#define DDRSS_CTL_250_DATA 0x00000000
+#define DDRSS_CTL_251_DATA 0x00000000
+#define DDRSS_CTL_252_DATA 0x00000000
+#define DDRSS_CTL_253_DATA 0x00000000
+#define DDRSS_CTL_254_DATA 0x00000000
+#define DDRSS_CTL_255_DATA 0x00000000
+#define DDRSS_CTL_256_DATA 0x00000000
+#define DDRSS_CTL_257_DATA 0x01000200
+#define DDRSS_CTL_258_DATA 0x00320040
+#define DDRSS_CTL_259_DATA 0x00020008
+#define DDRSS_CTL_260_DATA 0x00400100
+#define DDRSS_CTL_261_DATA 0x00180320
+#define DDRSS_CTL_262_DATA 0x01000200
+#define DDRSS_CTL_263_DATA 0x03200040
+#define DDRSS_CTL_264_DATA 0x00000018
+#define DDRSS_CTL_265_DATA 0x00280003
+#define DDRSS_CTL_266_DATA 0x01000028
+#define DDRSS_CTL_267_DATA 0x00000000
+#define DDRSS_CTL_268_DATA 0x01010000
+#define DDRSS_CTL_269_DATA 0x00000202
+#define DDRSS_CTL_270_DATA 0x00000FFF
+#define DDRSS_CTL_271_DATA 0x1FFF1000
+#define DDRSS_CTL_272_DATA 0x01FF0000
+#define DDRSS_CTL_273_DATA 0x000101FF
+#define DDRSS_CTL_274_DATA 0x0FFF0B00
+#define DDRSS_CTL_275_DATA 0x01010001
+#define DDRSS_CTL_276_DATA 0x01010101
+#define DDRSS_CTL_277_DATA 0x01180101
+#define DDRSS_CTL_278_DATA 0x00030000
+#define DDRSS_CTL_279_DATA 0x00000000
+#define DDRSS_CTL_280_DATA 0x00000000
+#define DDRSS_CTL_281_DATA 0x00000000
+#define DDRSS_CTL_282_DATA 0x00000000
+#define DDRSS_CTL_283_DATA 0x00000000
+#define DDRSS_CTL_284_DATA 0x00000000
+#define DDRSS_CTL_285_DATA 0x00000000
+#define DDRSS_CTL_286_DATA 0x00040101
+#define DDRSS_CTL_287_DATA 0x04010100
+#define DDRSS_CTL_288_DATA 0x00000000
+#define DDRSS_CTL_289_DATA 0x00000000
+#define DDRSS_CTL_290_DATA 0x03030300
+#define DDRSS_CTL_291_DATA 0x00000001
+#define DDRSS_CTL_292_DATA 0x00000000
+#define DDRSS_CTL_293_DATA 0x00000000
+#define DDRSS_CTL_294_DATA 0x00000000
+#define DDRSS_CTL_295_DATA 0x00000000
+#define DDRSS_CTL_296_DATA 0x00000000
+#define DDRSS_CTL_297_DATA 0x00000000
+#define DDRSS_CTL_298_DATA 0x00000000
+#define DDRSS_CTL_299_DATA 0x00000000
+#define DDRSS_CTL_300_DATA 0x00000000
+#define DDRSS_CTL_301_DATA 0x00000000
+#define DDRSS_CTL_302_DATA 0x00000000
+#define DDRSS_CTL_303_DATA 0x00000000
+#define DDRSS_CTL_304_DATA 0x00000000
+#define DDRSS_CTL_305_DATA 0x00000000
+#define DDRSS_CTL_306_DATA 0x00000000
+#define DDRSS_CTL_307_DATA 0x00000000
+#define DDRSS_CTL_308_DATA 0x00000000
+#define DDRSS_CTL_309_DATA 0x00000000
+#define DDRSS_CTL_310_DATA 0x00000000
+#define DDRSS_CTL_311_DATA 0x00000000
+#define DDRSS_CTL_312_DATA 0x00000000
+#define DDRSS_CTL_313_DATA 0x01000000
+#define DDRSS_CTL_314_DATA 0x00020201
+#define DDRSS_CTL_315_DATA 0x01000101
+#define DDRSS_CTL_316_DATA 0x01010001
+#define DDRSS_CTL_317_DATA 0x00010101
+#define DDRSS_CTL_318_DATA 0x05050503
+#define DDRSS_CTL_319_DATA 0x08080C0C
+#define DDRSS_CTL_320_DATA 0x00090308
+#define DDRSS_CTL_321_DATA 0x000C030F
+#define DDRSS_CTL_322_DATA 0x000C0311
+#define DDRSS_CTL_323_DATA 0x0C090011
+#define DDRSS_CTL_324_DATA 0x0100000C
+#define DDRSS_CTL_325_DATA 0x03020301
+#define DDRSS_CTL_326_DATA 0x00000002
+#define DDRSS_CTL_327_DATA 0x00000000
+#define DDRSS_CTL_328_DATA 0x00010000
+#define DDRSS_CTL_329_DATA 0x00280D00
+#define DDRSS_CTL_330_DATA 0x00000001
+#define DDRSS_CTL_331_DATA 0x00030001
+#define DDRSS_CTL_332_DATA 0x00000000
+#define DDRSS_CTL_333_DATA 0x00000000
+#define DDRSS_CTL_334_DATA 0x00000000
+#define DDRSS_CTL_335_DATA 0x00000000
+#define DDRSS_CTL_336_DATA 0x00000000
+#define DDRSS_CTL_337_DATA 0x00000000
+#define DDRSS_CTL_338_DATA 0x00000000
+#define DDRSS_CTL_339_DATA 0x00000000
+#define DDRSS_CTL_340_DATA 0x01000000
+#define DDRSS_CTL_341_DATA 0x00000001
+#define DDRSS_CTL_342_DATA 0x00010100
+#define DDRSS_CTL_343_DATA 0x03030000
+#define DDRSS_CTL_344_DATA 0x00000000
+#define DDRSS_CTL_345_DATA 0x00000000
+#define DDRSS_CTL_346_DATA 0x00000000
+#define DDRSS_CTL_347_DATA 0x00000000
+#define DDRSS_CTL_348_DATA 0x00000000
+#define DDRSS_CTL_349_DATA 0x00000000
+#define DDRSS_CTL_350_DATA 0x00000000
+#define DDRSS_CTL_351_DATA 0x00000000
+#define DDRSS_CTL_352_DATA 0x00000000
+#define DDRSS_CTL_353_DATA 0x00000000
+#define DDRSS_CTL_354_DATA 0x00000000
+#define DDRSS_CTL_355_DATA 0x00000000
+#define DDRSS_CTL_356_DATA 0x00000000
+#define DDRSS_CTL_357_DATA 0x00000000
+#define DDRSS_CTL_358_DATA 0x00000000
+#define DDRSS_CTL_359_DATA 0x00000000
+#define DDRSS_CTL_360_DATA 0x000556AA
+#define DDRSS_CTL_361_DATA 0x000AAAAA
+#define DDRSS_CTL_362_DATA 0x000AA955
+#define DDRSS_CTL_363_DATA 0x00055555
+#define DDRSS_CTL_364_DATA 0x000B3133
+#define DDRSS_CTL_365_DATA 0x0004CD33
+#define DDRSS_CTL_366_DATA 0x0004CECC
+#define DDRSS_CTL_367_DATA 0x000B32CC
+#define DDRSS_CTL_368_DATA 0x00010300
+#define DDRSS_CTL_369_DATA 0x03000100
+#define DDRSS_CTL_370_DATA 0x00000000
+#define DDRSS_CTL_371_DATA 0x00000000
+#define DDRSS_CTL_372_DATA 0x00000000
+#define DDRSS_CTL_373_DATA 0x00000000
+#define DDRSS_CTL_374_DATA 0x00000000
+#define DDRSS_CTL_375_DATA 0x00000000
+#define DDRSS_CTL_376_DATA 0x00000000
+#define DDRSS_CTL_377_DATA 0x00010000
+#define DDRSS_CTL_378_DATA 0x00000404
+#define DDRSS_CTL_379_DATA 0x00000000
+#define DDRSS_CTL_380_DATA 0x00000000
+#define DDRSS_CTL_381_DATA 0x00000000
+#define DDRSS_CTL_382_DATA 0x00000000
+#define DDRSS_CTL_383_DATA 0x00000000
+#define DDRSS_CTL_384_DATA 0x00000000
+#define DDRSS_CTL_385_DATA 0x00000000
+#define DDRSS_CTL_386_DATA 0x00000000
+#define DDRSS_CTL_387_DATA 0x26261B00
+#define DDRSS_CTL_388_DATA 0x000A0000
+#define DDRSS_CTL_389_DATA 0x00000176
+#define DDRSS_CTL_390_DATA 0x00000200
+#define DDRSS_CTL_391_DATA 0x00000200
+#define DDRSS_CTL_392_DATA 0x00000200
+#define DDRSS_CTL_393_DATA 0x00000200
+#define DDRSS_CTL_394_DATA 0x00000462
+#define DDRSS_CTL_395_DATA 0x00000E9C
+#define DDRSS_CTL_396_DATA 0x00000204
+#define DDRSS_CTL_397_DATA 0x00001850
+#define DDRSS_CTL_398_DATA 0x00000200
+#define DDRSS_CTL_399_DATA 0x00000200
+#define DDRSS_CTL_400_DATA 0x00000200
+#define DDRSS_CTL_401_DATA 0x00000200
+#define DDRSS_CTL_402_DATA 0x000048F0
+#define DDRSS_CTL_403_DATA 0x0000F320
+#define DDRSS_CTL_404_DATA 0x00000408
+#define DDRSS_CTL_405_DATA 0x00001850
+#define DDRSS_CTL_406_DATA 0x00000200
+#define DDRSS_CTL_407_DATA 0x00000200
+#define DDRSS_CTL_408_DATA 0x00000200
+#define DDRSS_CTL_409_DATA 0x00000200
+#define DDRSS_CTL_410_DATA 0x000048F0
+#define DDRSS_CTL_411_DATA 0x0000F320
+#define DDRSS_CTL_412_DATA 0x02020408
+#define DDRSS_CTL_413_DATA 0x03030202
+#define DDRSS_CTL_414_DATA 0x00000022
+#define DDRSS_CTL_415_DATA 0x00000000
+#define DDRSS_CTL_416_DATA 0x00000000
+#define DDRSS_CTL_417_DATA 0x00001403
+#define DDRSS_CTL_418_DATA 0x000007D0
+#define DDRSS_CTL_419_DATA 0x00000000
+#define DDRSS_CTL_420_DATA 0x00000000
+#define DDRSS_CTL_421_DATA 0x00030000
+#define DDRSS_CTL_422_DATA 0x0006001E
+#define DDRSS_CTL_423_DATA 0x000E0026
+#define DDRSS_CTL_424_DATA 0x000E0026
+#define DDRSS_CTL_425_DATA 0x00000000
+#define DDRSS_CTL_426_DATA 0x00000000
+#define DDRSS_CTL_427_DATA 0x02000000
+#define DDRSS_CTL_428_DATA 0x01000404
+#define DDRSS_CTL_429_DATA 0x01080108
+#define DDRSS_CTL_430_DATA 0x00000105
+#define DDRSS_CTL_431_DATA 0x00010101
+#define DDRSS_CTL_432_DATA 0x00010101
+#define DDRSS_CTL_433_DATA 0x00010001
+#define DDRSS_CTL_434_DATA 0x00000101
+#define DDRSS_CTL_435_DATA 0x02000201
+#define DDRSS_CTL_436_DATA 0x02010000
+#define DDRSS_CTL_437_DATA 0x00000200
+#define DDRSS_CTL_438_DATA 0x10060000
+#define DDRSS_CTL_439_DATA 0x00000110
+#define DDRSS_CTL_440_DATA 0xFFFFFFFF
+#define DDRSS_CTL_441_DATA 0xFFFFFFFF
+#define DDRSS_CTL_442_DATA 0x00000000
+#define DDRSS_CTL_443_DATA 0x00000000
+#define DDRSS_CTL_444_DATA 0x00000000
+#define DDRSS_CTL_445_DATA 0x00000000
+#define DDRSS_CTL_446_DATA 0x00000000
+#define DDRSS_CTL_447_DATA 0x00000000
+#define DDRSS_CTL_448_DATA 0x00000000
+#define DDRSS_CTL_449_DATA 0x00000000
+#define DDRSS_CTL_450_DATA 0x00000000
+#define DDRSS_CTL_451_DATA 0x00000000
+#define DDRSS_CTL_452_DATA 0x00000000
+#define DDRSS_CTL_453_DATA 0x00000000
+#define DDRSS_CTL_454_DATA 0x00000000
+#define DDRSS_CTL_455_DATA 0x00000000
+#define DDRSS_CTL_456_DATA 0x00000000
+#define DDRSS_CTL_457_DATA 0x00000000
+#define DDRSS_CTL_458_DATA 0x00000000
+
+#define DDRSS_PI_00_DATA 0x00000B00
+#define DDRSS_PI_01_DATA 0x00000000
+#define DDRSS_PI_02_DATA 0x00000000
+#define DDRSS_PI_03_DATA 0x00000000
+#define DDRSS_PI_04_DATA 0x00000000
+#define DDRSS_PI_05_DATA 0x00000101
+#define DDRSS_PI_06_DATA 0x00640000
+#define DDRSS_PI_07_DATA 0x00000001
+#define DDRSS_PI_08_DATA 0x00000000
+#define DDRSS_PI_09_DATA 0x00000000
+#define DDRSS_PI_10_DATA 0x00000000
+#define DDRSS_PI_11_DATA 0x00000000
+#define DDRSS_PI_12_DATA 0x00000007
+#define DDRSS_PI_13_DATA 0x00010002
+#define DDRSS_PI_14_DATA 0x0800000F
+#define DDRSS_PI_15_DATA 0x00000103
+#define DDRSS_PI_16_DATA 0x00000005
+#define DDRSS_PI_17_DATA 0x00000000
+#define DDRSS_PI_18_DATA 0x00000000
+#define DDRSS_PI_19_DATA 0x00000000
+#define DDRSS_PI_20_DATA 0x00000000
+#define DDRSS_PI_21_DATA 0x00000000
+#define DDRSS_PI_22_DATA 0x00000000
+#define DDRSS_PI_23_DATA 0x00000000
+#define DDRSS_PI_24_DATA 0x00000000
+#define DDRSS_PI_25_DATA 0x00000000
+#define DDRSS_PI_26_DATA 0x00010100
+#define DDRSS_PI_27_DATA 0x00280A00
+#define DDRSS_PI_28_DATA 0x00000000
+#define DDRSS_PI_29_DATA 0x0F000000
+#define DDRSS_PI_30_DATA 0x00003200
+#define DDRSS_PI_31_DATA 0x00000000
+#define DDRSS_PI_32_DATA 0x00000000
+#define DDRSS_PI_33_DATA 0x01010102
+#define DDRSS_PI_34_DATA 0x00000000
+#define DDRSS_PI_35_DATA 0x000000AA
+#define DDRSS_PI_36_DATA 0x00000055
+#define DDRSS_PI_37_DATA 0x000000B5
+#define DDRSS_PI_38_DATA 0x0000004A
+#define DDRSS_PI_39_DATA 0x00000056
+#define DDRSS_PI_40_DATA 0x000000A9
+#define DDRSS_PI_41_DATA 0x000000A9
+#define DDRSS_PI_42_DATA 0x000000B5
+#define DDRSS_PI_43_DATA 0x00000000
+#define DDRSS_PI_44_DATA 0x00000000
+#define DDRSS_PI_45_DATA 0x000F0F00
+#define DDRSS_PI_46_DATA 0x00000015
+#define DDRSS_PI_47_DATA 0x000007D0
+#define DDRSS_PI_48_DATA 0x00000300
+#define DDRSS_PI_49_DATA 0x00000000
+#define DDRSS_PI_50_DATA 0x00000000
+#define DDRSS_PI_51_DATA 0x01000000
+#define DDRSS_PI_52_DATA 0x00010101
+#define DDRSS_PI_53_DATA 0x00000000
+#define DDRSS_PI_54_DATA 0x00030000
+#define DDRSS_PI_55_DATA 0x0F000000
+#define DDRSS_PI_56_DATA 0x00000017
+#define DDRSS_PI_57_DATA 0x00000000
+#define DDRSS_PI_58_DATA 0x00000000
+#define DDRSS_PI_59_DATA 0x00000000
+#define DDRSS_PI_60_DATA 0x0A0A140A
+#define DDRSS_PI_61_DATA 0x10020101
+#define DDRSS_PI_62_DATA 0x00020805
+#define DDRSS_PI_63_DATA 0x01000404
+#define DDRSS_PI_64_DATA 0x00000000
+#define DDRSS_PI_65_DATA 0x00000000
+#define DDRSS_PI_66_DATA 0x00000100
+#define DDRSS_PI_67_DATA 0x0001010F
+#define DDRSS_PI_68_DATA 0x00340000
+#define DDRSS_PI_69_DATA 0x00000000
+#define DDRSS_PI_70_DATA 0x00000000
+#define DDRSS_PI_71_DATA 0x0000FFFF
+#define DDRSS_PI_72_DATA 0x00000000
+#define DDRSS_PI_73_DATA 0x00080100
+#define DDRSS_PI_74_DATA 0x02000200
+#define DDRSS_PI_75_DATA 0x01000100
+#define DDRSS_PI_76_DATA 0x01000000
+#define DDRSS_PI_77_DATA 0x02000200
+#define DDRSS_PI_78_DATA 0x00000200
+#define DDRSS_PI_79_DATA 0x00000000
+#define DDRSS_PI_80_DATA 0x00000000
+#define DDRSS_PI_81_DATA 0x00000000
+#define DDRSS_PI_82_DATA 0x00000000
+#define DDRSS_PI_83_DATA 0x00000000
+#define DDRSS_PI_84_DATA 0x00000000
+#define DDRSS_PI_85_DATA 0x00000000
+#define DDRSS_PI_86_DATA 0x00000000
+#define DDRSS_PI_87_DATA 0x00000000
+#define DDRSS_PI_88_DATA 0x00000000
+#define DDRSS_PI_89_DATA 0x00000000
+#define DDRSS_PI_90_DATA 0x00000000
+#define DDRSS_PI_91_DATA 0x00000400
+#define DDRSS_PI_92_DATA 0x02010000
+#define DDRSS_PI_93_DATA 0x00080003
+#define DDRSS_PI_94_DATA 0x00080000
+#define DDRSS_PI_95_DATA 0x00000001
+#define DDRSS_PI_96_DATA 0x00000000
+#define DDRSS_PI_97_DATA 0x0000AA00
+#define DDRSS_PI_98_DATA 0x00000000
+#define DDRSS_PI_99_DATA 0x00000000
+#define DDRSS_PI_100_DATA 0x00010000
+#define DDRSS_PI_101_DATA 0x00000000
+#define DDRSS_PI_102_DATA 0x00000000
+#define DDRSS_PI_103_DATA 0x00000000
+#define DDRSS_PI_104_DATA 0x00000000
+#define DDRSS_PI_105_DATA 0x00000000
+#define DDRSS_PI_106_DATA 0x00000000
+#define DDRSS_PI_107_DATA 0x00000000
+#define DDRSS_PI_108_DATA 0x00000000
+#define DDRSS_PI_109_DATA 0x00000000
+#define DDRSS_PI_110_DATA 0x00000000
+#define DDRSS_PI_111_DATA 0x00000000
+#define DDRSS_PI_112_DATA 0x00000000
+#define DDRSS_PI_113_DATA 0x00000000
+#define DDRSS_PI_114_DATA 0x00000000
+#define DDRSS_PI_115_DATA 0x00000000
+#define DDRSS_PI_116_DATA 0x00000000
+#define DDRSS_PI_117_DATA 0x00000000
+#define DDRSS_PI_118_DATA 0x00000000
+#define DDRSS_PI_119_DATA 0x00000000
+#define DDRSS_PI_120_DATA 0x00000000
+#define DDRSS_PI_121_DATA 0x00000000
+#define DDRSS_PI_122_DATA 0x00000000
+#define DDRSS_PI_123_DATA 0x00000000
+#define DDRSS_PI_124_DATA 0x00000000
+#define DDRSS_PI_125_DATA 0x00000008
+#define DDRSS_PI_126_DATA 0x00000000
+#define DDRSS_PI_127_DATA 0x00000000
+#define DDRSS_PI_128_DATA 0x00000000
+#define DDRSS_PI_129_DATA 0x00000000
+#define DDRSS_PI_130_DATA 0x00000000
+#define DDRSS_PI_131_DATA 0x00000000
+#define DDRSS_PI_132_DATA 0x00000000
+#define DDRSS_PI_133_DATA 0x00000000
+#define DDRSS_PI_134_DATA 0x00000002
+#define DDRSS_PI_135_DATA 0x00000000
+#define DDRSS_PI_136_DATA 0x00000000
+#define DDRSS_PI_137_DATA 0x0000000A
+#define DDRSS_PI_138_DATA 0x00000019
+#define DDRSS_PI_139_DATA 0x00000100
+#define DDRSS_PI_140_DATA 0x00000000
+#define DDRSS_PI_141_DATA 0x00000000
+#define DDRSS_PI_142_DATA 0x00000000
+#define DDRSS_PI_143_DATA 0x00000000
+#define DDRSS_PI_144_DATA 0x01000000
+#define DDRSS_PI_145_DATA 0x00010003
+#define DDRSS_PI_146_DATA 0x02000101
+#define DDRSS_PI_147_DATA 0x01030001
+#define DDRSS_PI_148_DATA 0x00010400
+#define DDRSS_PI_149_DATA 0x06000105
+#define DDRSS_PI_150_DATA 0x01070001
+#define DDRSS_PI_151_DATA 0x00000000
+#define DDRSS_PI_152_DATA 0x00000000
+#define DDRSS_PI_153_DATA 0x00000000
+#define DDRSS_PI_154_DATA 0x00010001
+#define DDRSS_PI_155_DATA 0x00000000
+#define DDRSS_PI_156_DATA 0x00000000
+#define DDRSS_PI_157_DATA 0x00000000
+#define DDRSS_PI_158_DATA 0x00000000
+#define DDRSS_PI_159_DATA 0x00000401
+#define DDRSS_PI_160_DATA 0x00000000
+#define DDRSS_PI_161_DATA 0x00010000
+#define DDRSS_PI_162_DATA 0x00000000
+#define DDRSS_PI_163_DATA 0x10100100
+#define DDRSS_PI_164_DATA 0x00000034
+#define DDRSS_PI_165_DATA 0x00000043
+#define DDRSS_PI_166_DATA 0x00020043
+#define DDRSS_PI_167_DATA 0x02000200
+#define DDRSS_PI_168_DATA 0x1C080C04
+#define DDRSS_PI_169_DATA 0x000E1C08
+#define DDRSS_PI_170_DATA 0x000000BB
+#define DDRSS_PI_171_DATA 0x000000E0
+#define DDRSS_PI_172_DATA 0x00000C28
+#define DDRSS_PI_173_DATA 0x000000E0
+#define DDRSS_PI_174_DATA 0x04000C28
+#define DDRSS_PI_175_DATA 0x01010404
+#define DDRSS_PI_176_DATA 0x00001501
+#define DDRSS_PI_177_DATA 0x00150015
+#define DDRSS_PI_178_DATA 0x01000100
+#define DDRSS_PI_179_DATA 0x00000100
+#define DDRSS_PI_180_DATA 0x00000000
+#define DDRSS_PI_181_DATA 0x01010101
+#define DDRSS_PI_182_DATA 0x00000101
+#define DDRSS_PI_183_DATA 0x00000000
+#define DDRSS_PI_184_DATA 0x00000000
+#define DDRSS_PI_185_DATA 0x08040000
+#define DDRSS_PI_186_DATA 0x04040208
+#define DDRSS_PI_187_DATA 0x00040402
+#define DDRSS_PI_188_DATA 0x000C8034
+#define DDRSS_PI_189_DATA 0x0014003C
+#define DDRSS_PI_190_DATA 0x0014003C
+#define DDRSS_PI_191_DATA 0x01010101
+#define DDRSS_PI_192_DATA 0x0002000D
+#define DDRSS_PI_193_DATA 0x000200C8
+#define DDRSS_PI_194_DATA 0x010000C8
+#define DDRSS_PI_195_DATA 0x000E000E
+#define DDRSS_PI_196_DATA 0x00C90100
+#define DDRSS_PI_197_DATA 0x010000C9
+#define DDRSS_PI_198_DATA 0x00C900C9
+#define DDRSS_PI_199_DATA 0x32103200
+#define DDRSS_PI_200_DATA 0x01013210
+#define DDRSS_PI_201_DATA 0x0A070601
+#define DDRSS_PI_202_DATA 0x0D09070D
+#define DDRSS_PI_203_DATA 0x0D09070D
+#define DDRSS_PI_204_DATA 0x0000C00D
+#define DDRSS_PI_205_DATA 0x00C01000
+#define DDRSS_PI_206_DATA 0x00C01000
+#define DDRSS_PI_207_DATA 0x00021000
+#define DDRSS_PI_208_DATA 0x0016000D
+#define DDRSS_PI_209_DATA 0x001600C8
+#define DDRSS_PI_210_DATA 0x001100C8
+#define DDRSS_PI_211_DATA 0x32000056
+#define DDRSS_PI_212_DATA 0x00000301
+#define DDRSS_PI_213_DATA 0x00580020
+#define DDRSS_PI_214_DATA 0x03013212
+#define DDRSS_PI_215_DATA 0x00002000
+#define DDRSS_PI_216_DATA 0x32120058
+#define DDRSS_PI_217_DATA 0x09000301
+#define DDRSS_PI_218_DATA 0x04010504
+#define DDRSS_PI_219_DATA 0x0400062B
+#define DDRSS_PI_220_DATA 0x0A032001
+#define DDRSS_PI_221_DATA 0x1113090A
+#define DDRSS_PI_222_DATA 0x0000120C
+#define DDRSS_PI_223_DATA 0x240062B8
+#define DDRSS_PI_224_DATA 0x0C0C2003
+#define DDRSS_PI_225_DATA 0x1113090A
+#define DDRSS_PI_226_DATA 0x0000120C
+#define DDRSS_PI_227_DATA 0x240062B8
+#define DDRSS_PI_228_DATA 0x0C0C2003
+#define DDRSS_PI_229_DATA 0x0001760A
+#define DDRSS_PI_230_DATA 0x00000E9C
+#define DDRSS_PI_231_DATA 0x00001850
+#define DDRSS_PI_232_DATA 0x0000F320
+#define DDRSS_PI_233_DATA 0x00001850
+#define DDRSS_PI_234_DATA 0x0000F320
+#define DDRSS_PI_235_DATA 0x00E6000F
+#define DDRSS_PI_236_DATA 0x030300E6
+#define DDRSS_PI_237_DATA 0x00271003
+#define DDRSS_PI_238_DATA 0x000186A0
+#define DDRSS_PI_239_DATA 0x00000005
+#define DDRSS_PI_240_DATA 0x00000064
+#define DDRSS_PI_241_DATA 0x0000000F
+#define DDRSS_PI_242_DATA 0x00027100
+#define DDRSS_PI_243_DATA 0x000186A0
+#define DDRSS_PI_244_DATA 0x00000005
+#define DDRSS_PI_245_DATA 0x00000640
+#define DDRSS_PI_246_DATA 0x000000E6
+#define DDRSS_PI_247_DATA 0x00027100
+#define DDRSS_PI_248_DATA 0x000186A0
+#define DDRSS_PI_249_DATA 0x00000005
+#define DDRSS_PI_250_DATA 0x00000640
+#define DDRSS_PI_251_DATA 0x010000E6
+#define DDRSS_PI_252_DATA 0x00320040
+#define DDRSS_PI_253_DATA 0x00010008
+#define DDRSS_PI_254_DATA 0x03200040
+#define DDRSS_PI_255_DATA 0x00010018
+#define DDRSS_PI_256_DATA 0x03200040
+#define DDRSS_PI_257_DATA 0x00000318
+#define DDRSS_PI_258_DATA 0x00280028
+#define DDRSS_PI_259_DATA 0x00040404
+#define DDRSS_PI_260_DATA 0x00000055
+#define DDRSS_PI_261_DATA 0x55003C5A
+#define DDRSS_PI_262_DATA 0x5A000000
+#define DDRSS_PI_263_DATA 0x0055003C
+#define DDRSS_PI_264_DATA 0x3C5A0000
+#define DDRSS_PI_265_DATA 0x00005500
+#define DDRSS_PI_266_DATA 0x0C3C5A00
+#define DDRSS_PI_267_DATA 0x080F0E0D
+#define DDRSS_PI_268_DATA 0x000B0A09
+#define DDRSS_PI_269_DATA 0x00030201
+#define DDRSS_PI_270_DATA 0x01000000
+#define DDRSS_PI_271_DATA 0x04020201
+#define DDRSS_PI_272_DATA 0x00080804
+#define DDRSS_PI_273_DATA 0x00000000
+#define DDRSS_PI_274_DATA 0x00000000
+#define DDRSS_PI_275_DATA 0x002B0084
+#define DDRSS_PI_276_DATA 0x00150000
+#define DDRSS_PI_277_DATA 0x362B12A4
+#define DDRSS_PI_278_DATA 0x00150F27
+#define DDRSS_PI_279_DATA 0x362B12A4
+#define DDRSS_PI_280_DATA 0x00150F27
+#define DDRSS_PI_281_DATA 0x002B0084
+#define DDRSS_PI_282_DATA 0x00150000
+#define DDRSS_PI_283_DATA 0x362B12A4
+#define DDRSS_PI_284_DATA 0x00150F27
+#define DDRSS_PI_285_DATA 0x362B12A4
+#define DDRSS_PI_286_DATA 0x00150F27
+#define DDRSS_PI_287_DATA 0x002B0084
+#define DDRSS_PI_288_DATA 0x00150000
+#define DDRSS_PI_289_DATA 0x362B12A4
+#define DDRSS_PI_290_DATA 0x00150F27
+#define DDRSS_PI_291_DATA 0x362B12A4
+#define DDRSS_PI_292_DATA 0x00150F27
+#define DDRSS_PI_293_DATA 0x002B0084
+#define DDRSS_PI_294_DATA 0x00150000
+#define DDRSS_PI_295_DATA 0x362B12A4
+#define DDRSS_PI_296_DATA 0x00150F27
+#define DDRSS_PI_297_DATA 0x362B12A4
+#define DDRSS_PI_298_DATA 0x00150F27
+#define DDRSS_PI_299_DATA 0x00000000
+
+#define DDRSS_PHY_00_DATA 0x000004F0
+#define DDRSS_PHY_01_DATA 0x00000000
+#define DDRSS_PHY_02_DATA 0x00030200
+#define DDRSS_PHY_03_DATA 0x00000000
+#define DDRSS_PHY_04_DATA 0x00000000
+#define DDRSS_PHY_05_DATA 0x01030000
+#define DDRSS_PHY_06_DATA 0x00010000
+#define DDRSS_PHY_07_DATA 0x01030004
+#define DDRSS_PHY_08_DATA 0x01000000
+#define DDRSS_PHY_09_DATA 0x00000000
+#define DDRSS_PHY_10_DATA 0x00000000
+#define DDRSS_PHY_11_DATA 0x01000001
+#define DDRSS_PHY_12_DATA 0x00000100
+#define DDRSS_PHY_13_DATA 0x000800C0
+#define DDRSS_PHY_14_DATA 0x060100CC
+#define DDRSS_PHY_15_DATA 0x00030066
+#define DDRSS_PHY_16_DATA 0x00000000
+#define DDRSS_PHY_17_DATA 0x00000301
+#define DDRSS_PHY_18_DATA 0x0000AAAA
+#define DDRSS_PHY_19_DATA 0x00005555
+#define DDRSS_PHY_20_DATA 0x0000B5B5
+#define DDRSS_PHY_21_DATA 0x00004A4A
+#define DDRSS_PHY_22_DATA 0x00005656
+#define DDRSS_PHY_23_DATA 0x0000A9A9
+#define DDRSS_PHY_24_DATA 0x0000A9A9
+#define DDRSS_PHY_25_DATA 0x0000B5B5
+#define DDRSS_PHY_26_DATA 0x00000000
+#define DDRSS_PHY_27_DATA 0x00000000
+#define DDRSS_PHY_28_DATA 0x2A000000
+#define DDRSS_PHY_29_DATA 0x00000808
+#define DDRSS_PHY_30_DATA 0x0F000000
+#define DDRSS_PHY_31_DATA 0x00000F0F
+#define DDRSS_PHY_32_DATA 0x10200000
+#define DDRSS_PHY_33_DATA 0x0C002007
+#define DDRSS_PHY_34_DATA 0x00000000
+#define DDRSS_PHY_35_DATA 0x00000000
+#define DDRSS_PHY_36_DATA 0x55555555
+#define DDRSS_PHY_37_DATA 0xAAAAAAAA
+#define DDRSS_PHY_38_DATA 0x55555555
+#define DDRSS_PHY_39_DATA 0xAAAAAAAA
+#define DDRSS_PHY_40_DATA 0x00005555
+#define DDRSS_PHY_41_DATA 0x01000100
+#define DDRSS_PHY_42_DATA 0x00800180
+#define DDRSS_PHY_43_DATA 0x00000001
+#define DDRSS_PHY_44_DATA 0x00000000
+#define DDRSS_PHY_45_DATA 0x00000000
+#define DDRSS_PHY_46_DATA 0x00000000
+#define DDRSS_PHY_47_DATA 0x00000000
+#define DDRSS_PHY_48_DATA 0x00000000
+#define DDRSS_PHY_49_DATA 0x00000000
+#define DDRSS_PHY_50_DATA 0x00000000
+#define DDRSS_PHY_51_DATA 0x00000000
+#define DDRSS_PHY_52_DATA 0x00000000
+#define DDRSS_PHY_53_DATA 0x00000000
+#define DDRSS_PHY_54_DATA 0x00000000
+#define DDRSS_PHY_55_DATA 0x00000000
+#define DDRSS_PHY_56_DATA 0x00000000
+#define DDRSS_PHY_57_DATA 0x00000000
+#define DDRSS_PHY_58_DATA 0x00000000
+#define DDRSS_PHY_59_DATA 0x00000000
+#define DDRSS_PHY_60_DATA 0x00000000
+#define DDRSS_PHY_61_DATA 0x00000000
+#define DDRSS_PHY_62_DATA 0x00000000
+#define DDRSS_PHY_63_DATA 0x00000000
+#define DDRSS_PHY_64_DATA 0x00000000
+#define DDRSS_PHY_65_DATA 0x00000000
+#define DDRSS_PHY_66_DATA 0x00000104
+#define DDRSS_PHY_67_DATA 0x00000120
+#define DDRSS_PHY_68_DATA 0x00000000
+#define DDRSS_PHY_69_DATA 0x00000000
+#define DDRSS_PHY_70_DATA 0x00000000
+#define DDRSS_PHY_71_DATA 0x00000000
+#define DDRSS_PHY_72_DATA 0x00000000
+#define DDRSS_PHY_73_DATA 0x00000000
+#define DDRSS_PHY_74_DATA 0x00000000
+#define DDRSS_PHY_75_DATA 0x00000001
+#define DDRSS_PHY_76_DATA 0x07FF0000
+#define DDRSS_PHY_77_DATA 0x0080081F
+#define DDRSS_PHY_78_DATA 0x00081020
+#define DDRSS_PHY_79_DATA 0x04010000
+#define DDRSS_PHY_80_DATA 0x00000000
+#define DDRSS_PHY_81_DATA 0x00000000
+#define DDRSS_PHY_82_DATA 0x00000000
+#define DDRSS_PHY_83_DATA 0x00000100
+#define DDRSS_PHY_84_DATA 0x01CC0B01
+#define DDRSS_PHY_85_DATA 0x1003CC0B
+#define DDRSS_PHY_86_DATA 0x20000140
+#define DDRSS_PHY_87_DATA 0x07FF0200
+#define DDRSS_PHY_88_DATA 0x0000DD01
+#define DDRSS_PHY_89_DATA 0x10100303
+#define DDRSS_PHY_90_DATA 0x10101010
+#define DDRSS_PHY_91_DATA 0x10101010
+#define DDRSS_PHY_92_DATA 0x00011010
+#define DDRSS_PHY_93_DATA 0x00100010
+#define DDRSS_PHY_94_DATA 0x00100010
+#define DDRSS_PHY_95_DATA 0x00100010
+#define DDRSS_PHY_96_DATA 0x00100010
+#define DDRSS_PHY_97_DATA 0x00050010
+#define DDRSS_PHY_98_DATA 0x51517041
+#define DDRSS_PHY_99_DATA 0x31C06000
+#define DDRSS_PHY_100_DATA 0x07AB0340
+#define DDRSS_PHY_101_DATA 0x00C0C001
+#define DDRSS_PHY_102_DATA 0x05040001
+#define DDRSS_PHY_103_DATA 0x10001000
+#define DDRSS_PHY_104_DATA 0x0C053E42
+#define DDRSS_PHY_105_DATA 0x0F0C1D01
+#define DDRSS_PHY_106_DATA 0x01000140
+#define DDRSS_PHY_107_DATA 0x0C000420
+#define DDRSS_PHY_108_DATA 0x000001CC
+#define DDRSS_PHY_109_DATA 0x0A0000D0
+#define DDRSS_PHY_110_DATA 0x00030200
+#define DDRSS_PHY_111_DATA 0x02800000
+#define DDRSS_PHY_112_DATA 0x80800000
+#define DDRSS_PHY_113_DATA 0x00052010
+#define DDRSS_PHY_114_DATA 0x76543210
+#define DDRSS_PHY_115_DATA 0x00000008
+#define DDRSS_PHY_116_DATA 0x02800280
+#define DDRSS_PHY_117_DATA 0x02800280
+#define DDRSS_PHY_118_DATA 0x02800280
+#define DDRSS_PHY_119_DATA 0x02800280
+#define DDRSS_PHY_120_DATA 0x00000280
+#define DDRSS_PHY_121_DATA 0x0000A000
+#define DDRSS_PHY_122_DATA 0x00A000A0
+#define DDRSS_PHY_123_DATA 0x00A000A0
+#define DDRSS_PHY_124_DATA 0x00A000A0
+#define DDRSS_PHY_125_DATA 0x00A000A0
+#define DDRSS_PHY_126_DATA 0x00A000A0
+#define DDRSS_PHY_127_DATA 0x00A000A0
+#define DDRSS_PHY_128_DATA 0x00A000A0
+#define DDRSS_PHY_129_DATA 0x00A000A0
+#define DDRSS_PHY_130_DATA 0x011900A0
+#define DDRSS_PHY_131_DATA 0x01A00002
+#define DDRSS_PHY_132_DATA 0x00000000
+#define DDRSS_PHY_133_DATA 0x00000000
+#define DDRSS_PHY_134_DATA 0x00080200
+#define DDRSS_PHY_135_DATA 0x00000000
+#define DDRSS_PHY_136_DATA 0x20202000
+#define DDRSS_PHY_137_DATA 0x20202020
+#define DDRSS_PHY_138_DATA 0xF0F02020
+#define DDRSS_PHY_139_DATA 0x00000000
+#define DDRSS_PHY_140_DATA 0x00000000
+#define DDRSS_PHY_141_DATA 0x00000000
+#define DDRSS_PHY_142_DATA 0x00000000
+#define DDRSS_PHY_143_DATA 0x00000000
+#define DDRSS_PHY_144_DATA 0x00000000
+#define DDRSS_PHY_145_DATA 0x00000000
+#define DDRSS_PHY_146_DATA 0x00000000
+#define DDRSS_PHY_147_DATA 0x00000000
+#define DDRSS_PHY_148_DATA 0x00000000
+#define DDRSS_PHY_149_DATA 0x00000000
+#define DDRSS_PHY_150_DATA 0x00000000
+#define DDRSS_PHY_151_DATA 0x00000000
+#define DDRSS_PHY_152_DATA 0x00000000
+#define DDRSS_PHY_153_DATA 0x00000000
+#define DDRSS_PHY_154_DATA 0x00000000
+#define DDRSS_PHY_155_DATA 0x00000000
+#define DDRSS_PHY_156_DATA 0x00000000
+#define DDRSS_PHY_157_DATA 0x00000000
+#define DDRSS_PHY_158_DATA 0x00000000
+#define DDRSS_PHY_159_DATA 0x00000000
+#define DDRSS_PHY_160_DATA 0x00000000
+#define DDRSS_PHY_161_DATA 0x00000000
+#define DDRSS_PHY_162_DATA 0x00000000
+#define DDRSS_PHY_163_DATA 0x00000000
+#define DDRSS_PHY_164_DATA 0x00000000
+#define DDRSS_PHY_165_DATA 0x00000000
+#define DDRSS_PHY_166_DATA 0x00000000
+#define DDRSS_PHY_167_DATA 0x00000000
+#define DDRSS_PHY_168_DATA 0x00000000
+#define DDRSS_PHY_169_DATA 0x00000000
+#define DDRSS_PHY_170_DATA 0x00000000
+#define DDRSS_PHY_171_DATA 0x00000000
+#define DDRSS_PHY_172_DATA 0x00000000
+#define DDRSS_PHY_173_DATA 0x00000000
+#define DDRSS_PHY_174_DATA 0x00000000
+#define DDRSS_PHY_175_DATA 0x00000000
+#define DDRSS_PHY_176_DATA 0x00000000
+#define DDRSS_PHY_177_DATA 0x00000000
+#define DDRSS_PHY_178_DATA 0x00000000
+#define DDRSS_PHY_179_DATA 0x00000000
+#define DDRSS_PHY_180_DATA 0x00000000
+#define DDRSS_PHY_181_DATA 0x00000000
+#define DDRSS_PHY_182_DATA 0x00000000
+#define DDRSS_PHY_183_DATA 0x00000000
+#define DDRSS_PHY_184_DATA 0x00000000
+#define DDRSS_PHY_185_DATA 0x00000000
+#define DDRSS_PHY_186_DATA 0x00000000
+#define DDRSS_PHY_187_DATA 0x00000000
+#define DDRSS_PHY_188_DATA 0x00000000
+#define DDRSS_PHY_189_DATA 0x00000000
+#define DDRSS_PHY_190_DATA 0x00000000
+#define DDRSS_PHY_191_DATA 0x00000000
+#define DDRSS_PHY_192_DATA 0x00000000
+#define DDRSS_PHY_193_DATA 0x00000000
+#define DDRSS_PHY_194_DATA 0x00000000
+#define DDRSS_PHY_195_DATA 0x00000000
+#define DDRSS_PHY_196_DATA 0x00000000
+#define DDRSS_PHY_197_DATA 0x00000000
+#define DDRSS_PHY_198_DATA 0x00000000
+#define DDRSS_PHY_199_DATA 0x00000000
+#define DDRSS_PHY_200_DATA 0x00000000
+#define DDRSS_PHY_201_DATA 0x00000000
+#define DDRSS_PHY_202_DATA 0x00000000
+#define DDRSS_PHY_203_DATA 0x00000000
+#define DDRSS_PHY_204_DATA 0x00000000
+#define DDRSS_PHY_205_DATA 0x00000000
+#define DDRSS_PHY_206_DATA 0x00000000
+#define DDRSS_PHY_207_DATA 0x00000000
+#define DDRSS_PHY_208_DATA 0x00000000
+#define DDRSS_PHY_209_DATA 0x00000000
+#define DDRSS_PHY_210_DATA 0x00000000
+#define DDRSS_PHY_211_DATA 0x00000000
+#define DDRSS_PHY_212_DATA 0x00000000
+#define DDRSS_PHY_213_DATA 0x00000000
+#define DDRSS_PHY_214_DATA 0x00000000
+#define DDRSS_PHY_215_DATA 0x00000000
+#define DDRSS_PHY_216_DATA 0x00000000
+#define DDRSS_PHY_217_DATA 0x00000000
+#define DDRSS_PHY_218_DATA 0x00000000
+#define DDRSS_PHY_219_DATA 0x00000000
+#define DDRSS_PHY_220_DATA 0x00000000
+#define DDRSS_PHY_221_DATA 0x00000000
+#define DDRSS_PHY_222_DATA 0x00000000
+#define DDRSS_PHY_223_DATA 0x00000000
+#define DDRSS_PHY_224_DATA 0x00000000
+#define DDRSS_PHY_225_DATA 0x00000000
+#define DDRSS_PHY_226_DATA 0x00000000
+#define DDRSS_PHY_227_DATA 0x00000000
+#define DDRSS_PHY_228_DATA 0x00000000
+#define DDRSS_PHY_229_DATA 0x00000000
+#define DDRSS_PHY_230_DATA 0x00000000
+#define DDRSS_PHY_231_DATA 0x00000000
+#define DDRSS_PHY_232_DATA 0x00000000
+#define DDRSS_PHY_233_DATA 0x00000000
+#define DDRSS_PHY_234_DATA 0x00000000
+#define DDRSS_PHY_235_DATA 0x00000000
+#define DDRSS_PHY_236_DATA 0x00000000
+#define DDRSS_PHY_237_DATA 0x00000000
+#define DDRSS_PHY_238_DATA 0x00000000
+#define DDRSS_PHY_239_DATA 0x00000000
+#define DDRSS_PHY_240_DATA 0x00000000
+#define DDRSS_PHY_241_DATA 0x00000000
+#define DDRSS_PHY_242_DATA 0x00000000
+#define DDRSS_PHY_243_DATA 0x00000000
+#define DDRSS_PHY_244_DATA 0x00000000
+#define DDRSS_PHY_245_DATA 0x00000000
+#define DDRSS_PHY_246_DATA 0x00000000
+#define DDRSS_PHY_247_DATA 0x00000000
+#define DDRSS_PHY_248_DATA 0x00000000
+#define DDRSS_PHY_249_DATA 0x00000000
+#define DDRSS_PHY_250_DATA 0x00000000
+#define DDRSS_PHY_251_DATA 0x00000000
+#define DDRSS_PHY_252_DATA 0x00000000
+#define DDRSS_PHY_253_DATA 0x00000000
+#define DDRSS_PHY_254_DATA 0x00000000
+#define DDRSS_PHY_255_DATA 0x00000000
+#define DDRSS_PHY_256_DATA 0x000004F0
+#define DDRSS_PHY_257_DATA 0x00000000
+#define DDRSS_PHY_258_DATA 0x00030200
+#define DDRSS_PHY_259_DATA 0x00000000
+#define DDRSS_PHY_260_DATA 0x00000000
+#define DDRSS_PHY_261_DATA 0x01030000
+#define DDRSS_PHY_262_DATA 0x00010000
+#define DDRSS_PHY_263_DATA 0x01030004
+#define DDRSS_PHY_264_DATA 0x01000000
+#define DDRSS_PHY_265_DATA 0x00000000
+#define DDRSS_PHY_266_DATA 0x00000000
+#define DDRSS_PHY_267_DATA 0x01000001
+#define DDRSS_PHY_268_DATA 0x00000100
+#define DDRSS_PHY_269_DATA 0x000800C0
+#define DDRSS_PHY_270_DATA 0x060100CC
+#define DDRSS_PHY_271_DATA 0x00030066
+#define DDRSS_PHY_272_DATA 0x00000000
+#define DDRSS_PHY_273_DATA 0x00000301
+#define DDRSS_PHY_274_DATA 0x0000AAAA
+#define DDRSS_PHY_275_DATA 0x00005555
+#define DDRSS_PHY_276_DATA 0x0000B5B5
+#define DDRSS_PHY_277_DATA 0x00004A4A
+#define DDRSS_PHY_278_DATA 0x00005656
+#define DDRSS_PHY_279_DATA 0x0000A9A9
+#define DDRSS_PHY_280_DATA 0x0000A9A9
+#define DDRSS_PHY_281_DATA 0x0000B5B5
+#define DDRSS_PHY_282_DATA 0x00000000
+#define DDRSS_PHY_283_DATA 0x00000000
+#define DDRSS_PHY_284_DATA 0x2A000000
+#define DDRSS_PHY_285_DATA 0x00000808
+#define DDRSS_PHY_286_DATA 0x0F000000
+#define DDRSS_PHY_287_DATA 0x00000F0F
+#define DDRSS_PHY_288_DATA 0x10200000
+#define DDRSS_PHY_289_DATA 0x0C002007
+#define DDRSS_PHY_290_DATA 0x00000000
+#define DDRSS_PHY_291_DATA 0x00000000
+#define DDRSS_PHY_292_DATA 0x55555555
+#define DDRSS_PHY_293_DATA 0xAAAAAAAA
+#define DDRSS_PHY_294_DATA 0x55555555
+#define DDRSS_PHY_295_DATA 0xAAAAAAAA
+#define DDRSS_PHY_296_DATA 0x00005555
+#define DDRSS_PHY_297_DATA 0x01000100
+#define DDRSS_PHY_298_DATA 0x00800180
+#define DDRSS_PHY_299_DATA 0x00000000
+#define DDRSS_PHY_300_DATA 0x00000000
+#define DDRSS_PHY_301_DATA 0x00000000
+#define DDRSS_PHY_302_DATA 0x00000000
+#define DDRSS_PHY_303_DATA 0x00000000
+#define DDRSS_PHY_304_DATA 0x00000000
+#define DDRSS_PHY_305_DATA 0x00000000
+#define DDRSS_PHY_306_DATA 0x00000000
+#define DDRSS_PHY_307_DATA 0x00000000
+#define DDRSS_PHY_308_DATA 0x00000000
+#define DDRSS_PHY_309_DATA 0x00000000
+#define DDRSS_PHY_310_DATA 0x00000000
+#define DDRSS_PHY_311_DATA 0x00000000
+#define DDRSS_PHY_312_DATA 0x00000000
+#define DDRSS_PHY_313_DATA 0x00000000
+#define DDRSS_PHY_314_DATA 0x00000000
+#define DDRSS_PHY_315_DATA 0x00000000
+#define DDRSS_PHY_316_DATA 0x00000000
+#define DDRSS_PHY_317_DATA 0x00000000
+#define DDRSS_PHY_318_DATA 0x00000000
+#define DDRSS_PHY_319_DATA 0x00000000
+#define DDRSS_PHY_320_DATA 0x00000000
+#define DDRSS_PHY_321_DATA 0x00000000
+#define DDRSS_PHY_322_DATA 0x00000104
+#define DDRSS_PHY_323_DATA 0x00000120
+#define DDRSS_PHY_324_DATA 0x00000000
+#define DDRSS_PHY_325_DATA 0x00000000
+#define DDRSS_PHY_326_DATA 0x00000000
+#define DDRSS_PHY_327_DATA 0x00000000
+#define DDRSS_PHY_328_DATA 0x00000000
+#define DDRSS_PHY_329_DATA 0x00000000
+#define DDRSS_PHY_330_DATA 0x00000000
+#define DDRSS_PHY_331_DATA 0x00000001
+#define DDRSS_PHY_332_DATA 0x07FF0000
+#define DDRSS_PHY_333_DATA 0x0080081F
+#define DDRSS_PHY_334_DATA 0x00081020
+#define DDRSS_PHY_335_DATA 0x04010000
+#define DDRSS_PHY_336_DATA 0x00000000
+#define DDRSS_PHY_337_DATA 0x00000000
+#define DDRSS_PHY_338_DATA 0x00000000
+#define DDRSS_PHY_339_DATA 0x00000100
+#define DDRSS_PHY_340_DATA 0x01CC0B01
+#define DDRSS_PHY_341_DATA 0x1003CC0B
+#define DDRSS_PHY_342_DATA 0x20000140
+#define DDRSS_PHY_343_DATA 0x07FF0200
+#define DDRSS_PHY_344_DATA 0x0000DD01
+#define DDRSS_PHY_345_DATA 0x10100303
+#define DDRSS_PHY_346_DATA 0x10101010
+#define DDRSS_PHY_347_DATA 0x10101010
+#define DDRSS_PHY_348_DATA 0x00011010
+#define DDRSS_PHY_349_DATA 0x00100010
+#define DDRSS_PHY_350_DATA 0x00100010
+#define DDRSS_PHY_351_DATA 0x00100010
+#define DDRSS_PHY_352_DATA 0x00100010
+#define DDRSS_PHY_353_DATA 0x00050010
+#define DDRSS_PHY_354_DATA 0x51517041
+#define DDRSS_PHY_355_DATA 0x31C06000
+#define DDRSS_PHY_356_DATA 0x07AB0340
+#define DDRSS_PHY_357_DATA 0x00C0C001
+#define DDRSS_PHY_358_DATA 0x05040001
+#define DDRSS_PHY_359_DATA 0x10001000
+#define DDRSS_PHY_360_DATA 0x0C053E42
+#define DDRSS_PHY_361_DATA 0x0F0C1D01
+#define DDRSS_PHY_362_DATA 0x01000140
+#define DDRSS_PHY_363_DATA 0x0C000420
+#define DDRSS_PHY_364_DATA 0x000001CC
+#define DDRSS_PHY_365_DATA 0x0A0000D0
+#define DDRSS_PHY_366_DATA 0x00030200
+#define DDRSS_PHY_367_DATA 0x02800000
+#define DDRSS_PHY_368_DATA 0x80800000
+#define DDRSS_PHY_369_DATA 0x00052010
+#define DDRSS_PHY_370_DATA 0x76543210
+#define DDRSS_PHY_371_DATA 0x00000008
+#define DDRSS_PHY_372_DATA 0x02800280
+#define DDRSS_PHY_373_DATA 0x02800280
+#define DDRSS_PHY_374_DATA 0x02800280
+#define DDRSS_PHY_375_DATA 0x02800280
+#define DDRSS_PHY_376_DATA 0x00000280
+#define DDRSS_PHY_377_DATA 0x0000A000
+#define DDRSS_PHY_378_DATA 0x00A000A0
+#define DDRSS_PHY_379_DATA 0x00A000A0
+#define DDRSS_PHY_380_DATA 0x00A000A0
+#define DDRSS_PHY_381_DATA 0x00A000A0
+#define DDRSS_PHY_382_DATA 0x00A000A0
+#define DDRSS_PHY_383_DATA 0x00A000A0
+#define DDRSS_PHY_384_DATA 0x00A000A0
+#define DDRSS_PHY_385_DATA 0x00A000A0
+#define DDRSS_PHY_386_DATA 0x011900A0
+#define DDRSS_PHY_387_DATA 0x01A00002
+#define DDRSS_PHY_388_DATA 0x00000000
+#define DDRSS_PHY_389_DATA 0x00000000
+#define DDRSS_PHY_390_DATA 0x00080200
+#define DDRSS_PHY_391_DATA 0x00000000
+#define DDRSS_PHY_392_DATA 0x20202000
+#define DDRSS_PHY_393_DATA 0x20202020
+#define DDRSS_PHY_394_DATA 0xF0F02020
+#define DDRSS_PHY_395_DATA 0x00000000
+#define DDRSS_PHY_396_DATA 0x00000000
+#define DDRSS_PHY_397_DATA 0x00000000
+#define DDRSS_PHY_398_DATA 0x00000000
+#define DDRSS_PHY_399_DATA 0x00000000
+#define DDRSS_PHY_400_DATA 0x00000000
+#define DDRSS_PHY_401_DATA 0x00000000
+#define DDRSS_PHY_402_DATA 0x00000000
+#define DDRSS_PHY_403_DATA 0x00000000
+#define DDRSS_PHY_404_DATA 0x00000000
+#define DDRSS_PHY_405_DATA 0x00000000
+#define DDRSS_PHY_406_DATA 0x00000000
+#define DDRSS_PHY_407_DATA 0x00000000
+#define DDRSS_PHY_408_DATA 0x00000000
+#define DDRSS_PHY_409_DATA 0x00000000
+#define DDRSS_PHY_410_DATA 0x00000000
+#define DDRSS_PHY_411_DATA 0x00000000
+#define DDRSS_PHY_412_DATA 0x00000000
+#define DDRSS_PHY_413_DATA 0x00000000
+#define DDRSS_PHY_414_DATA 0x00000000
+#define DDRSS_PHY_415_DATA 0x00000000
+#define DDRSS_PHY_416_DATA 0x00000000
+#define DDRSS_PHY_417_DATA 0x00000000
+#define DDRSS_PHY_418_DATA 0x00000000
+#define DDRSS_PHY_419_DATA 0x00000000
+#define DDRSS_PHY_420_DATA 0x00000000
+#define DDRSS_PHY_421_DATA 0x00000000
+#define DDRSS_PHY_422_DATA 0x00000000
+#define DDRSS_PHY_423_DATA 0x00000000
+#define DDRSS_PHY_424_DATA 0x00000000
+#define DDRSS_PHY_425_DATA 0x00000000
+#define DDRSS_PHY_426_DATA 0x00000000
+#define DDRSS_PHY_427_DATA 0x00000000
+#define DDRSS_PHY_428_DATA 0x00000000
+#define DDRSS_PHY_429_DATA 0x00000000
+#define DDRSS_PHY_430_DATA 0x00000000
+#define DDRSS_PHY_431_DATA 0x00000000
+#define DDRSS_PHY_432_DATA 0x00000000
+#define DDRSS_PHY_433_DATA 0x00000000
+#define DDRSS_PHY_434_DATA 0x00000000
+#define DDRSS_PHY_435_DATA 0x00000000
+#define DDRSS_PHY_436_DATA 0x00000000
+#define DDRSS_PHY_437_DATA 0x00000000
+#define DDRSS_PHY_438_DATA 0x00000000
+#define DDRSS_PHY_439_DATA 0x00000000
+#define DDRSS_PHY_440_DATA 0x00000000
+#define DDRSS_PHY_441_DATA 0x00000000
+#define DDRSS_PHY_442_DATA 0x00000000
+#define DDRSS_PHY_443_DATA 0x00000000
+#define DDRSS_PHY_444_DATA 0x00000000
+#define DDRSS_PHY_445_DATA 0x00000000
+#define DDRSS_PHY_446_DATA 0x00000000
+#define DDRSS_PHY_447_DATA 0x00000000
+#define DDRSS_PHY_448_DATA 0x00000000
+#define DDRSS_PHY_449_DATA 0x00000000
+#define DDRSS_PHY_450_DATA 0x00000000
+#define DDRSS_PHY_451_DATA 0x00000000
+#define DDRSS_PHY_452_DATA 0x00000000
+#define DDRSS_PHY_453_DATA 0x00000000
+#define DDRSS_PHY_454_DATA 0x00000000
+#define DDRSS_PHY_455_DATA 0x00000000
+#define DDRSS_PHY_456_DATA 0x00000000
+#define DDRSS_PHY_457_DATA 0x00000000
+#define DDRSS_PHY_458_DATA 0x00000000
+#define DDRSS_PHY_459_DATA 0x00000000
+#define DDRSS_PHY_460_DATA 0x00000000
+#define DDRSS_PHY_461_DATA 0x00000000
+#define DDRSS_PHY_462_DATA 0x00000000
+#define DDRSS_PHY_463_DATA 0x00000000
+#define DDRSS_PHY_464_DATA 0x00000000
+#define DDRSS_PHY_465_DATA 0x00000000
+#define DDRSS_PHY_466_DATA 0x00000000
+#define DDRSS_PHY_467_DATA 0x00000000
+#define DDRSS_PHY_468_DATA 0x00000000
+#define DDRSS_PHY_469_DATA 0x00000000
+#define DDRSS_PHY_470_DATA 0x00000000
+#define DDRSS_PHY_471_DATA 0x00000000
+#define DDRSS_PHY_472_DATA 0x00000000
+#define DDRSS_PHY_473_DATA 0x00000000
+#define DDRSS_PHY_474_DATA 0x00000000
+#define DDRSS_PHY_475_DATA 0x00000000
+#define DDRSS_PHY_476_DATA 0x00000000
+#define DDRSS_PHY_477_DATA 0x00000000
+#define DDRSS_PHY_478_DATA 0x00000000
+#define DDRSS_PHY_479_DATA 0x00000000
+#define DDRSS_PHY_480_DATA 0x00000000
+#define DDRSS_PHY_481_DATA 0x00000000
+#define DDRSS_PHY_482_DATA 0x00000000
+#define DDRSS_PHY_483_DATA 0x00000000
+#define DDRSS_PHY_484_DATA 0x00000000
+#define DDRSS_PHY_485_DATA 0x00000000
+#define DDRSS_PHY_486_DATA 0x00000000
+#define DDRSS_PHY_487_DATA 0x00000000
+#define DDRSS_PHY_488_DATA 0x00000000
+#define DDRSS_PHY_489_DATA 0x00000000
+#define DDRSS_PHY_490_DATA 0x00000000
+#define DDRSS_PHY_491_DATA 0x00000000
+#define DDRSS_PHY_492_DATA 0x00000000
+#define DDRSS_PHY_493_DATA 0x00000000
+#define DDRSS_PHY_494_DATA 0x00000000
+#define DDRSS_PHY_495_DATA 0x00000000
+#define DDRSS_PHY_496_DATA 0x00000000
+#define DDRSS_PHY_497_DATA 0x00000000
+#define DDRSS_PHY_498_DATA 0x00000000
+#define DDRSS_PHY_499_DATA 0x00000000
+#define DDRSS_PHY_500_DATA 0x00000000
+#define DDRSS_PHY_501_DATA 0x00000000
+#define DDRSS_PHY_502_DATA 0x00000000
+#define DDRSS_PHY_503_DATA 0x00000000
+#define DDRSS_PHY_504_DATA 0x00000000
+#define DDRSS_PHY_505_DATA 0x00000000
+#define DDRSS_PHY_506_DATA 0x00000000
+#define DDRSS_PHY_507_DATA 0x00000000
+#define DDRSS_PHY_508_DATA 0x00000000
+#define DDRSS_PHY_509_DATA 0x00000000
+#define DDRSS_PHY_510_DATA 0x00000000
+#define DDRSS_PHY_511_DATA 0x00000000
+#define DDRSS_PHY_512_DATA 0x000004F0
+#define DDRSS_PHY_513_DATA 0x00000000
+#define DDRSS_PHY_514_DATA 0x00030200
+#define DDRSS_PHY_515_DATA 0x00000000
+#define DDRSS_PHY_516_DATA 0x00000000
+#define DDRSS_PHY_517_DATA 0x01030000
+#define DDRSS_PHY_518_DATA 0x00010000
+#define DDRSS_PHY_519_DATA 0x01030004
+#define DDRSS_PHY_520_DATA 0x01000000
+#define DDRSS_PHY_521_DATA 0x00000000
+#define DDRSS_PHY_522_DATA 0x00000000
+#define DDRSS_PHY_523_DATA 0x01000001
+#define DDRSS_PHY_524_DATA 0x00000100
+#define DDRSS_PHY_525_DATA 0x000800C0
+#define DDRSS_PHY_526_DATA 0x060100CC
+#define DDRSS_PHY_527_DATA 0x00030066
+#define DDRSS_PHY_528_DATA 0x00000000
+#define DDRSS_PHY_529_DATA 0x00000301
+#define DDRSS_PHY_530_DATA 0x0000AAAA
+#define DDRSS_PHY_531_DATA 0x00005555
+#define DDRSS_PHY_532_DATA 0x0000B5B5
+#define DDRSS_PHY_533_DATA 0x00004A4A
+#define DDRSS_PHY_534_DATA 0x00005656
+#define DDRSS_PHY_535_DATA 0x0000A9A9
+#define DDRSS_PHY_536_DATA 0x0000A9A9
+#define DDRSS_PHY_537_DATA 0x0000B5B5
+#define DDRSS_PHY_538_DATA 0x00000000
+#define DDRSS_PHY_539_DATA 0x00000000
+#define DDRSS_PHY_540_DATA 0x2A000000
+#define DDRSS_PHY_541_DATA 0x00000808
+#define DDRSS_PHY_542_DATA 0x0F000000
+#define DDRSS_PHY_543_DATA 0x00000F0F
+#define DDRSS_PHY_544_DATA 0x10200000
+#define DDRSS_PHY_545_DATA 0x0C002007
+#define DDRSS_PHY_546_DATA 0x00000000
+#define DDRSS_PHY_547_DATA 0x00000000
+#define DDRSS_PHY_548_DATA 0x55555555
+#define DDRSS_PHY_549_DATA 0xAAAAAAAA
+#define DDRSS_PHY_550_DATA 0x55555555
+#define DDRSS_PHY_551_DATA 0xAAAAAAAA
+#define DDRSS_PHY_552_DATA 0x00005555
+#define DDRSS_PHY_553_DATA 0x01000100
+#define DDRSS_PHY_554_DATA 0x00800180
+#define DDRSS_PHY_555_DATA 0x00000001
+#define DDRSS_PHY_556_DATA 0x00000000
+#define DDRSS_PHY_557_DATA 0x00000000
+#define DDRSS_PHY_558_DATA 0x00000000
+#define DDRSS_PHY_559_DATA 0x00000000
+#define DDRSS_PHY_560_DATA 0x00000000
+#define DDRSS_PHY_561_DATA 0x00000000
+#define DDRSS_PHY_562_DATA 0x00000000
+#define DDRSS_PHY_563_DATA 0x00000000
+#define DDRSS_PHY_564_DATA 0x00000000
+#define DDRSS_PHY_565_DATA 0x00000000
+#define DDRSS_PHY_566_DATA 0x00000000
+#define DDRSS_PHY_567_DATA 0x00000000
+#define DDRSS_PHY_568_DATA 0x00000000
+#define DDRSS_PHY_569_DATA 0x00000000
+#define DDRSS_PHY_570_DATA 0x00000000
+#define DDRSS_PHY_571_DATA 0x00000000
+#define DDRSS_PHY_572_DATA 0x00000000
+#define DDRSS_PHY_573_DATA 0x00000000
+#define DDRSS_PHY_574_DATA 0x00000000
+#define DDRSS_PHY_575_DATA 0x00000000
+#define DDRSS_PHY_576_DATA 0x00000000
+#define DDRSS_PHY_577_DATA 0x00000000
+#define DDRSS_PHY_578_DATA 0x00000104
+#define DDRSS_PHY_579_DATA 0x00000120
+#define DDRSS_PHY_580_DATA 0x00000000
+#define DDRSS_PHY_581_DATA 0x00000000
+#define DDRSS_PHY_582_DATA 0x00000000
+#define DDRSS_PHY_583_DATA 0x00000000
+#define DDRSS_PHY_584_DATA 0x00000000
+#define DDRSS_PHY_585_DATA 0x00000000
+#define DDRSS_PHY_586_DATA 0x00000000
+#define DDRSS_PHY_587_DATA 0x00000001
+#define DDRSS_PHY_588_DATA 0x07FF0000
+#define DDRSS_PHY_589_DATA 0x0080081F
+#define DDRSS_PHY_590_DATA 0x00081020
+#define DDRSS_PHY_591_DATA 0x04010000
+#define DDRSS_PHY_592_DATA 0x00000000
+#define DDRSS_PHY_593_DATA 0x00000000
+#define DDRSS_PHY_594_DATA 0x00000000
+#define DDRSS_PHY_595_DATA 0x00000100
+#define DDRSS_PHY_596_DATA 0x01CC0B01
+#define DDRSS_PHY_597_DATA 0x1003CC0B
+#define DDRSS_PHY_598_DATA 0x20000140
+#define DDRSS_PHY_599_DATA 0x07FF0200
+#define DDRSS_PHY_600_DATA 0x0000DD01
+#define DDRSS_PHY_601_DATA 0x10100303
+#define DDRSS_PHY_602_DATA 0x10101010
+#define DDRSS_PHY_603_DATA 0x10101010
+#define DDRSS_PHY_604_DATA 0x00011010
+#define DDRSS_PHY_605_DATA 0x00100010
+#define DDRSS_PHY_606_DATA 0x00100010
+#define DDRSS_PHY_607_DATA 0x00100010
+#define DDRSS_PHY_608_DATA 0x00100010
+#define DDRSS_PHY_609_DATA 0x00050010
+#define DDRSS_PHY_610_DATA 0x51517041
+#define DDRSS_PHY_611_DATA 0x31C06000
+#define DDRSS_PHY_612_DATA 0x07AB0340
+#define DDRSS_PHY_613_DATA 0x00C0C001
+#define DDRSS_PHY_614_DATA 0x05040001
+#define DDRSS_PHY_615_DATA 0x10001000
+#define DDRSS_PHY_616_DATA 0x0C053E42
+#define DDRSS_PHY_617_DATA 0x0F0C1D01
+#define DDRSS_PHY_618_DATA 0x01000140
+#define DDRSS_PHY_619_DATA 0x0C000420
+#define DDRSS_PHY_620_DATA 0x000001CC
+#define DDRSS_PHY_621_DATA 0x0A0000D0
+#define DDRSS_PHY_622_DATA 0x00030200
+#define DDRSS_PHY_623_DATA 0x02800000
+#define DDRSS_PHY_624_DATA 0x80800000
+#define DDRSS_PHY_625_DATA 0x00052010
+#define DDRSS_PHY_626_DATA 0x76543210
+#define DDRSS_PHY_627_DATA 0x00000008
+#define DDRSS_PHY_628_DATA 0x02800280
+#define DDRSS_PHY_629_DATA 0x02800280
+#define DDRSS_PHY_630_DATA 0x02800280
+#define DDRSS_PHY_631_DATA 0x02800280
+#define DDRSS_PHY_632_DATA 0x00000280
+#define DDRSS_PHY_633_DATA 0x0000A000
+#define DDRSS_PHY_634_DATA 0x00A000A0
+#define DDRSS_PHY_635_DATA 0x00A000A0
+#define DDRSS_PHY_636_DATA 0x00A000A0
+#define DDRSS_PHY_637_DATA 0x00A000A0
+#define DDRSS_PHY_638_DATA 0x00A000A0
+#define DDRSS_PHY_639_DATA 0x00A000A0
+#define DDRSS_PHY_640_DATA 0x00A000A0
+#define DDRSS_PHY_641_DATA 0x00A000A0
+#define DDRSS_PHY_642_DATA 0x011900A0
+#define DDRSS_PHY_643_DATA 0x01A00002
+#define DDRSS_PHY_644_DATA 0x00000000
+#define DDRSS_PHY_645_DATA 0x00000000
+#define DDRSS_PHY_646_DATA 0x00080200
+#define DDRSS_PHY_647_DATA 0x00000000
+#define DDRSS_PHY_648_DATA 0x20202000
+#define DDRSS_PHY_649_DATA 0x20202020
+#define DDRSS_PHY_650_DATA 0xF0F02020
+#define DDRSS_PHY_651_DATA 0x00000000
+#define DDRSS_PHY_652_DATA 0x00000000
+#define DDRSS_PHY_653_DATA 0x00000000
+#define DDRSS_PHY_654_DATA 0x00000000
+#define DDRSS_PHY_655_DATA 0x00000000
+#define DDRSS_PHY_656_DATA 0x00000000
+#define DDRSS_PHY_657_DATA 0x00000000
+#define DDRSS_PHY_658_DATA 0x00000000
+#define DDRSS_PHY_659_DATA 0x00000000
+#define DDRSS_PHY_660_DATA 0x00000000
+#define DDRSS_PHY_661_DATA 0x00000000
+#define DDRSS_PHY_662_DATA 0x00000000
+#define DDRSS_PHY_663_DATA 0x00000000
+#define DDRSS_PHY_664_DATA 0x00000000
+#define DDRSS_PHY_665_DATA 0x00000000
+#define DDRSS_PHY_666_DATA 0x00000000
+#define DDRSS_PHY_667_DATA 0x00000000
+#define DDRSS_PHY_668_DATA 0x00000000
+#define DDRSS_PHY_669_DATA 0x00000000
+#define DDRSS_PHY_670_DATA 0x00000000
+#define DDRSS_PHY_671_DATA 0x00000000
+#define DDRSS_PHY_672_DATA 0x00000000
+#define DDRSS_PHY_673_DATA 0x00000000
+#define DDRSS_PHY_674_DATA 0x00000000
+#define DDRSS_PHY_675_DATA 0x00000000
+#define DDRSS_PHY_676_DATA 0x00000000
+#define DDRSS_PHY_677_DATA 0x00000000
+#define DDRSS_PHY_678_DATA 0x00000000
+#define DDRSS_PHY_679_DATA 0x00000000
+#define DDRSS_PHY_680_DATA 0x00000000
+#define DDRSS_PHY_681_DATA 0x00000000
+#define DDRSS_PHY_682_DATA 0x00000000
+#define DDRSS_PHY_683_DATA 0x00000000
+#define DDRSS_PHY_684_DATA 0x00000000
+#define DDRSS_PHY_685_DATA 0x00000000
+#define DDRSS_PHY_686_DATA 0x00000000
+#define DDRSS_PHY_687_DATA 0x00000000
+#define DDRSS_PHY_688_DATA 0x00000000
+#define DDRSS_PHY_689_DATA 0x00000000
+#define DDRSS_PHY_690_DATA 0x00000000
+#define DDRSS_PHY_691_DATA 0x00000000
+#define DDRSS_PHY_692_DATA 0x00000000
+#define DDRSS_PHY_693_DATA 0x00000000
+#define DDRSS_PHY_694_DATA 0x00000000
+#define DDRSS_PHY_695_DATA 0x00000000
+#define DDRSS_PHY_696_DATA 0x00000000
+#define DDRSS_PHY_697_DATA 0x00000000
+#define DDRSS_PHY_698_DATA 0x00000000
+#define DDRSS_PHY_699_DATA 0x00000000
+#define DDRSS_PHY_700_DATA 0x00000000
+#define DDRSS_PHY_701_DATA 0x00000000
+#define DDRSS_PHY_702_DATA 0x00000000
+#define DDRSS_PHY_703_DATA 0x00000000
+#define DDRSS_PHY_704_DATA 0x00000000
+#define DDRSS_PHY_705_DATA 0x00000000
+#define DDRSS_PHY_706_DATA 0x00000000
+#define DDRSS_PHY_707_DATA 0x00000000
+#define DDRSS_PHY_708_DATA 0x00000000
+#define DDRSS_PHY_709_DATA 0x00000000
+#define DDRSS_PHY_710_DATA 0x00000000
+#define DDRSS_PHY_711_DATA 0x00000000
+#define DDRSS_PHY_712_DATA 0x00000000
+#define DDRSS_PHY_713_DATA 0x00000000
+#define DDRSS_PHY_714_DATA 0x00000000
+#define DDRSS_PHY_715_DATA 0x00000000
+#define DDRSS_PHY_716_DATA 0x00000000
+#define DDRSS_PHY_717_DATA 0x00000000
+#define DDRSS_PHY_718_DATA 0x00000000
+#define DDRSS_PHY_719_DATA 0x00000000
+#define DDRSS_PHY_720_DATA 0x00000000
+#define DDRSS_PHY_721_DATA 0x00000000
+#define DDRSS_PHY_722_DATA 0x00000000
+#define DDRSS_PHY_723_DATA 0x00000000
+#define DDRSS_PHY_724_DATA 0x00000000
+#define DDRSS_PHY_725_DATA 0x00000000
+#define DDRSS_PHY_726_DATA 0x00000000
+#define DDRSS_PHY_727_DATA 0x00000000
+#define DDRSS_PHY_728_DATA 0x00000000
+#define DDRSS_PHY_729_DATA 0x00000000
+#define DDRSS_PHY_730_DATA 0x00000000
+#define DDRSS_PHY_731_DATA 0x00000000
+#define DDRSS_PHY_732_DATA 0x00000000
+#define DDRSS_PHY_733_DATA 0x00000000
+#define DDRSS_PHY_734_DATA 0x00000000
+#define DDRSS_PHY_735_DATA 0x00000000
+#define DDRSS_PHY_736_DATA 0x00000000
+#define DDRSS_PHY_737_DATA 0x00000000
+#define DDRSS_PHY_738_DATA 0x00000000
+#define DDRSS_PHY_739_DATA 0x00000000
+#define DDRSS_PHY_740_DATA 0x00000000
+#define DDRSS_PHY_741_DATA 0x00000000
+#define DDRSS_PHY_742_DATA 0x00000000
+#define DDRSS_PHY_743_DATA 0x00000000
+#define DDRSS_PHY_744_DATA 0x00000000
+#define DDRSS_PHY_745_DATA 0x00000000
+#define DDRSS_PHY_746_DATA 0x00000000
+#define DDRSS_PHY_747_DATA 0x00000000
+#define DDRSS_PHY_748_DATA 0x00000000
+#define DDRSS_PHY_749_DATA 0x00000000
+#define DDRSS_PHY_750_DATA 0x00000000
+#define DDRSS_PHY_751_DATA 0x00000000
+#define DDRSS_PHY_752_DATA 0x00000000
+#define DDRSS_PHY_753_DATA 0x00000000
+#define DDRSS_PHY_754_DATA 0x00000000
+#define DDRSS_PHY_755_DATA 0x00000000
+#define DDRSS_PHY_756_DATA 0x00000000
+#define DDRSS_PHY_757_DATA 0x00000000
+#define DDRSS_PHY_758_DATA 0x00000000
+#define DDRSS_PHY_759_DATA 0x00000000
+#define DDRSS_PHY_760_DATA 0x00000000
+#define DDRSS_PHY_761_DATA 0x00000000
+#define DDRSS_PHY_762_DATA 0x00000000
+#define DDRSS_PHY_763_DATA 0x00000000
+#define DDRSS_PHY_764_DATA 0x00000000
+#define DDRSS_PHY_765_DATA 0x00000000
+#define DDRSS_PHY_766_DATA 0x00000000
+#define DDRSS_PHY_767_DATA 0x00000000
+#define DDRSS_PHY_768_DATA 0x000004F0
+#define DDRSS_PHY_769_DATA 0x00000000
+#define DDRSS_PHY_770_DATA 0x00030200
+#define DDRSS_PHY_771_DATA 0x00000000
+#define DDRSS_PHY_772_DATA 0x00000000
+#define DDRSS_PHY_773_DATA 0x01030000
+#define DDRSS_PHY_774_DATA 0x00010000
+#define DDRSS_PHY_775_DATA 0x01030004
+#define DDRSS_PHY_776_DATA 0x01000000
+#define DDRSS_PHY_777_DATA 0x00000000
+#define DDRSS_PHY_778_DATA 0x00000000
+#define DDRSS_PHY_779_DATA 0x01000001
+#define DDRSS_PHY_780_DATA 0x00000100
+#define DDRSS_PHY_781_DATA 0x000800C0
+#define DDRSS_PHY_782_DATA 0x060100CC
+#define DDRSS_PHY_783_DATA 0x00030066
+#define DDRSS_PHY_784_DATA 0x00000000
+#define DDRSS_PHY_785_DATA 0x00000301
+#define DDRSS_PHY_786_DATA 0x0000AAAA
+#define DDRSS_PHY_787_DATA 0x00005555
+#define DDRSS_PHY_788_DATA 0x0000B5B5
+#define DDRSS_PHY_789_DATA 0x00004A4A
+#define DDRSS_PHY_790_DATA 0x00005656
+#define DDRSS_PHY_791_DATA 0x0000A9A9
+#define DDRSS_PHY_792_DATA 0x0000A9A9
+#define DDRSS_PHY_793_DATA 0x0000B5B5
+#define DDRSS_PHY_794_DATA 0x00000000
+#define DDRSS_PHY_795_DATA 0x00000000
+#define DDRSS_PHY_796_DATA 0x2A000000
+#define DDRSS_PHY_797_DATA 0x00000808
+#define DDRSS_PHY_798_DATA 0x0F000000
+#define DDRSS_PHY_799_DATA 0x00000F0F
+#define DDRSS_PHY_800_DATA 0x10200000
+#define DDRSS_PHY_801_DATA 0x0C002007
+#define DDRSS_PHY_802_DATA 0x00000000
+#define DDRSS_PHY_803_DATA 0x00000000
+#define DDRSS_PHY_804_DATA 0x55555555
+#define DDRSS_PHY_805_DATA 0xAAAAAAAA
+#define DDRSS_PHY_806_DATA 0x55555555
+#define DDRSS_PHY_807_DATA 0xAAAAAAAA
+#define DDRSS_PHY_808_DATA 0x00005555
+#define DDRSS_PHY_809_DATA 0x01000100
+#define DDRSS_PHY_810_DATA 0x00800180
+#define DDRSS_PHY_811_DATA 0x00000000
+#define DDRSS_PHY_812_DATA 0x00000000
+#define DDRSS_PHY_813_DATA 0x00000000
+#define DDRSS_PHY_814_DATA 0x00000000
+#define DDRSS_PHY_815_DATA 0x00000000
+#define DDRSS_PHY_816_DATA 0x00000000
+#define DDRSS_PHY_817_DATA 0x00000000
+#define DDRSS_PHY_818_DATA 0x00000000
+#define DDRSS_PHY_819_DATA 0x00000000
+#define DDRSS_PHY_820_DATA 0x00000000
+#define DDRSS_PHY_821_DATA 0x00000000
+#define DDRSS_PHY_822_DATA 0x00000000
+#define DDRSS_PHY_823_DATA 0x00000000
+#define DDRSS_PHY_824_DATA 0x00000000
+#define DDRSS_PHY_825_DATA 0x00000000
+#define DDRSS_PHY_826_DATA 0x00000000
+#define DDRSS_PHY_827_DATA 0x00000000
+#define DDRSS_PHY_828_DATA 0x00000000
+#define DDRSS_PHY_829_DATA 0x00000000
+#define DDRSS_PHY_830_DATA 0x00000000
+#define DDRSS_PHY_831_DATA 0x00000000
+#define DDRSS_PHY_832_DATA 0x00000000
+#define DDRSS_PHY_833_DATA 0x00000000
+#define DDRSS_PHY_834_DATA 0x00000104
+#define DDRSS_PHY_835_DATA 0x00000120
+#define DDRSS_PHY_836_DATA 0x00000000
+#define DDRSS_PHY_837_DATA 0x00000000
+#define DDRSS_PHY_838_DATA 0x00000000
+#define DDRSS_PHY_839_DATA 0x00000000
+#define DDRSS_PHY_840_DATA 0x00000000
+#define DDRSS_PHY_841_DATA 0x00000000
+#define DDRSS_PHY_842_DATA 0x00000000
+#define DDRSS_PHY_843_DATA 0x00000001
+#define DDRSS_PHY_844_DATA 0x07FF0000
+#define DDRSS_PHY_845_DATA 0x0080081F
+#define DDRSS_PHY_846_DATA 0x00081020
+#define DDRSS_PHY_847_DATA 0x04010000
+#define DDRSS_PHY_848_DATA 0x00000000
+#define DDRSS_PHY_849_DATA 0x00000000
+#define DDRSS_PHY_850_DATA 0x00000000
+#define DDRSS_PHY_851_DATA 0x00000100
+#define DDRSS_PHY_852_DATA 0x01CC0B01
+#define DDRSS_PHY_853_DATA 0x1003CC0B
+#define DDRSS_PHY_854_DATA 0x20000140
+#define DDRSS_PHY_855_DATA 0x07FF0200
+#define DDRSS_PHY_856_DATA 0x0000DD01
+#define DDRSS_PHY_857_DATA 0x10100303
+#define DDRSS_PHY_858_DATA 0x10101010
+#define DDRSS_PHY_859_DATA 0x10101010
+#define DDRSS_PHY_860_DATA 0x00011010
+#define DDRSS_PHY_861_DATA 0x00100010
+#define DDRSS_PHY_862_DATA 0x00100010
+#define DDRSS_PHY_863_DATA 0x00100010
+#define DDRSS_PHY_864_DATA 0x00100010
+#define DDRSS_PHY_865_DATA 0x00050010
+#define DDRSS_PHY_866_DATA 0x51517041
+#define DDRSS_PHY_867_DATA 0x31C06000
+#define DDRSS_PHY_868_DATA 0x07AB0340
+#define DDRSS_PHY_869_DATA 0x00C0C001
+#define DDRSS_PHY_870_DATA 0x05040001
+#define DDRSS_PHY_871_DATA 0x10001000
+#define DDRSS_PHY_872_DATA 0x0C053E42
+#define DDRSS_PHY_873_DATA 0x0F0C1D01
+#define DDRSS_PHY_874_DATA 0x01000140
+#define DDRSS_PHY_875_DATA 0x0C000420
+#define DDRSS_PHY_876_DATA 0x000001CC
+#define DDRSS_PHY_877_DATA 0x0A0000D0
+#define DDRSS_PHY_878_DATA 0x00030200
+#define DDRSS_PHY_879_DATA 0x02800000
+#define DDRSS_PHY_880_DATA 0x80800000
+#define DDRSS_PHY_881_DATA 0x00052010
+#define DDRSS_PHY_882_DATA 0x76543210
+#define DDRSS_PHY_883_DATA 0x00000008
+#define DDRSS_PHY_884_DATA 0x02800280
+#define DDRSS_PHY_885_DATA 0x02800280
+#define DDRSS_PHY_886_DATA 0x02800280
+#define DDRSS_PHY_887_DATA 0x02800280
+#define DDRSS_PHY_888_DATA 0x00000280
+#define DDRSS_PHY_889_DATA 0x0000A000
+#define DDRSS_PHY_890_DATA 0x00A000A0
+#define DDRSS_PHY_891_DATA 0x00A000A0
+#define DDRSS_PHY_892_DATA 0x00A000A0
+#define DDRSS_PHY_893_DATA 0x00A000A0
+#define DDRSS_PHY_894_DATA 0x00A000A0
+#define DDRSS_PHY_895_DATA 0x00A000A0
+#define DDRSS_PHY_896_DATA 0x00A000A0
+#define DDRSS_PHY_897_DATA 0x00A000A0
+#define DDRSS_PHY_898_DATA 0x011900A0
+#define DDRSS_PHY_899_DATA 0x01A00002
+#define DDRSS_PHY_900_DATA 0x00000000
+#define DDRSS_PHY_901_DATA 0x00000000
+#define DDRSS_PHY_902_DATA 0x00080200
+#define DDRSS_PHY_903_DATA 0x00000000
+#define DDRSS_PHY_904_DATA 0x20202010
+#define DDRSS_PHY_905_DATA 0x20202020
+#define DDRSS_PHY_906_DATA 0xF0F02020
+#define DDRSS_PHY_907_DATA 0x00000000
+#define DDRSS_PHY_908_DATA 0x00000000
+#define DDRSS_PHY_909_DATA 0x00000000
+#define DDRSS_PHY_910_DATA 0x00000000
+#define DDRSS_PHY_911_DATA 0x00000000
+#define DDRSS_PHY_912_DATA 0x00000000
+#define DDRSS_PHY_913_DATA 0x00000000
+#define DDRSS_PHY_914_DATA 0x00000000
+#define DDRSS_PHY_915_DATA 0x00000000
+#define DDRSS_PHY_916_DATA 0x00000000
+#define DDRSS_PHY_917_DATA 0x00000000
+#define DDRSS_PHY_918_DATA 0x00000000
+#define DDRSS_PHY_919_DATA 0x00000000
+#define DDRSS_PHY_920_DATA 0x00000000
+#define DDRSS_PHY_921_DATA 0x00000000
+#define DDRSS_PHY_922_DATA 0x00000000
+#define DDRSS_PHY_923_DATA 0x00000000
+#define DDRSS_PHY_924_DATA 0x00000000
+#define DDRSS_PHY_925_DATA 0x00000000
+#define DDRSS_PHY_926_DATA 0x00000000
+#define DDRSS_PHY_927_DATA 0x00000000
+#define DDRSS_PHY_928_DATA 0x00000000
+#define DDRSS_PHY_929_DATA 0x00000000
+#define DDRSS_PHY_930_DATA 0x00000000
+#define DDRSS_PHY_931_DATA 0x00000000
+#define DDRSS_PHY_932_DATA 0x00000000
+#define DDRSS_PHY_933_DATA 0x00000000
+#define DDRSS_PHY_934_DATA 0x00000000
+#define DDRSS_PHY_935_DATA 0x00000000
+#define DDRSS_PHY_936_DATA 0x00000000
+#define DDRSS_PHY_937_DATA 0x00000000
+#define DDRSS_PHY_938_DATA 0x00000000
+#define DDRSS_PHY_939_DATA 0x00000000
+#define DDRSS_PHY_940_DATA 0x00000000
+#define DDRSS_PHY_941_DATA 0x00000000
+#define DDRSS_PHY_942_DATA 0x00000000
+#define DDRSS_PHY_943_DATA 0x00000000
+#define DDRSS_PHY_944_DATA 0x00000000
+#define DDRSS_PHY_945_DATA 0x00000000
+#define DDRSS_PHY_946_DATA 0x00000000
+#define DDRSS_PHY_947_DATA 0x00000000
+#define DDRSS_PHY_948_DATA 0x00000000
+#define DDRSS_PHY_949_DATA 0x00000000
+#define DDRSS_PHY_950_DATA 0x00000000
+#define DDRSS_PHY_951_DATA 0x00000000
+#define DDRSS_PHY_952_DATA 0x00000000
+#define DDRSS_PHY_953_DATA 0x00000000
+#define DDRSS_PHY_954_DATA 0x00000000
+#define DDRSS_PHY_955_DATA 0x00000000
+#define DDRSS_PHY_956_DATA 0x00000000
+#define DDRSS_PHY_957_DATA 0x00000000
+#define DDRSS_PHY_958_DATA 0x00000000
+#define DDRSS_PHY_959_DATA 0x00000000
+#define DDRSS_PHY_960_DATA 0x00000000
+#define DDRSS_PHY_961_DATA 0x00000000
+#define DDRSS_PHY_962_DATA 0x00000000
+#define DDRSS_PHY_963_DATA 0x00000000
+#define DDRSS_PHY_964_DATA 0x00000000
+#define DDRSS_PHY_965_DATA 0x00000000
+#define DDRSS_PHY_966_DATA 0x00000000
+#define DDRSS_PHY_967_DATA 0x00000000
+#define DDRSS_PHY_968_DATA 0x00000000
+#define DDRSS_PHY_969_DATA 0x00000000
+#define DDRSS_PHY_970_DATA 0x00000000
+#define DDRSS_PHY_971_DATA 0x00000000
+#define DDRSS_PHY_972_DATA 0x00000000
+#define DDRSS_PHY_973_DATA 0x00000000
+#define DDRSS_PHY_974_DATA 0x00000000
+#define DDRSS_PHY_975_DATA 0x00000000
+#define DDRSS_PHY_976_DATA 0x00000000
+#define DDRSS_PHY_977_DATA 0x00000000
+#define DDRSS_PHY_978_DATA 0x00000000
+#define DDRSS_PHY_979_DATA 0x00000000
+#define DDRSS_PHY_980_DATA 0x00000000
+#define DDRSS_PHY_981_DATA 0x00000000
+#define DDRSS_PHY_982_DATA 0x00000000
+#define DDRSS_PHY_983_DATA 0x00000000
+#define DDRSS_PHY_984_DATA 0x00000000
+#define DDRSS_PHY_985_DATA 0x00000000
+#define DDRSS_PHY_986_DATA 0x00000000
+#define DDRSS_PHY_987_DATA 0x00000000
+#define DDRSS_PHY_988_DATA 0x00000000
+#define DDRSS_PHY_989_DATA 0x00000000
+#define DDRSS_PHY_990_DATA 0x00000000
+#define DDRSS_PHY_991_DATA 0x00000000
+#define DDRSS_PHY_992_DATA 0x00000000
+#define DDRSS_PHY_993_DATA 0x00000000
+#define DDRSS_PHY_994_DATA 0x00000000
+#define DDRSS_PHY_995_DATA 0x00000000
+#define DDRSS_PHY_996_DATA 0x00000000
+#define DDRSS_PHY_997_DATA 0x00000000
+#define DDRSS_PHY_998_DATA 0x00000000
+#define DDRSS_PHY_999_DATA 0x00000000
+#define DDRSS_PHY_1000_DATA 0x00000000
+#define DDRSS_PHY_1001_DATA 0x00000000
+#define DDRSS_PHY_1002_DATA 0x00000000
+#define DDRSS_PHY_1003_DATA 0x00000000
+#define DDRSS_PHY_1004_DATA 0x00000000
+#define DDRSS_PHY_1005_DATA 0x00000000
+#define DDRSS_PHY_1006_DATA 0x00000000
+#define DDRSS_PHY_1007_DATA 0x00000000
+#define DDRSS_PHY_1008_DATA 0x00000000
+#define DDRSS_PHY_1009_DATA 0x00000000
+#define DDRSS_PHY_1010_DATA 0x00000000
+#define DDRSS_PHY_1011_DATA 0x00000000
+#define DDRSS_PHY_1012_DATA 0x00000000
+#define DDRSS_PHY_1013_DATA 0x00000000
+#define DDRSS_PHY_1014_DATA 0x00000000
+#define DDRSS_PHY_1015_DATA 0x00000000
+#define DDRSS_PHY_1016_DATA 0x00000000
+#define DDRSS_PHY_1017_DATA 0x00000000
+#define DDRSS_PHY_1018_DATA 0x00000000
+#define DDRSS_PHY_1019_DATA 0x00000000
+#define DDRSS_PHY_1020_DATA 0x00000000
+#define DDRSS_PHY_1021_DATA 0x00000000
+#define DDRSS_PHY_1022_DATA 0x00000000
+#define DDRSS_PHY_1023_DATA 0x00000000
+#define DDRSS_PHY_1024_DATA 0x00000000
+#define DDRSS_PHY_1025_DATA 0x00000000
+#define DDRSS_PHY_1026_DATA 0x00000000
+#define DDRSS_PHY_1027_DATA 0x00000000
+#define DDRSS_PHY_1028_DATA 0x00000000
+#define DDRSS_PHY_1029_DATA 0x00000100
+#define DDRSS_PHY_1030_DATA 0x00000200
+#define DDRSS_PHY_1031_DATA 0x00000000
+#define DDRSS_PHY_1032_DATA 0x00000000
+#define DDRSS_PHY_1033_DATA 0x00000000
+#define DDRSS_PHY_1034_DATA 0x00000000
+#define DDRSS_PHY_1035_DATA 0x00400000
+#define DDRSS_PHY_1036_DATA 0x00000080
+#define DDRSS_PHY_1037_DATA 0x00DCBA98
+#define DDRSS_PHY_1038_DATA 0x03000000
+#define DDRSS_PHY_1039_DATA 0x00200000
+#define DDRSS_PHY_1040_DATA 0x00000000
+#define DDRSS_PHY_1041_DATA 0x00000000
+#define DDRSS_PHY_1042_DATA 0x00000000
+#define DDRSS_PHY_1043_DATA 0x00000000
+#define DDRSS_PHY_1044_DATA 0x00000000
+#define DDRSS_PHY_1045_DATA 0x0000002A
+#define DDRSS_PHY_1046_DATA 0x00000015
+#define DDRSS_PHY_1047_DATA 0x00000015
+#define DDRSS_PHY_1048_DATA 0x0000002A
+#define DDRSS_PHY_1049_DATA 0x00000033
+#define DDRSS_PHY_1050_DATA 0x0000000C
+#define DDRSS_PHY_1051_DATA 0x0000000C
+#define DDRSS_PHY_1052_DATA 0x00000033
+#define DDRSS_PHY_1053_DATA 0x00543210
+#define DDRSS_PHY_1054_DATA 0x003F0000
+#define DDRSS_PHY_1055_DATA 0x000F013F
+#define DDRSS_PHY_1056_DATA 0x20202003
+#define DDRSS_PHY_1057_DATA 0x00202020
+#define DDRSS_PHY_1058_DATA 0x20008008
+#define DDRSS_PHY_1059_DATA 0x00000810
+#define DDRSS_PHY_1060_DATA 0x00000F00
+#define DDRSS_PHY_1061_DATA 0x00000000
+#define DDRSS_PHY_1062_DATA 0x00000000
+#define DDRSS_PHY_1063_DATA 0x00000000
+#define DDRSS_PHY_1064_DATA 0x000205BB
+#define DDRSS_PHY_1065_DATA 0x00030000
+#define DDRSS_PHY_1066_DATA 0x00000300
+#define DDRSS_PHY_1067_DATA 0x00000300
+#define DDRSS_PHY_1068_DATA 0x00000300
+#define DDRSS_PHY_1069_DATA 0x00000300
+#define DDRSS_PHY_1070_DATA 0x00000300
+#define DDRSS_PHY_1071_DATA 0x42080010
+#define DDRSS_PHY_1072_DATA 0x0000803E
+#define DDRSS_PHY_1073_DATA 0x00000001
+#define DDRSS_PHY_1074_DATA 0x01000102
+#define DDRSS_PHY_1075_DATA 0x00008000
+#define DDRSS_PHY_1076_DATA 0x00000000
+#define DDRSS_PHY_1077_DATA 0x00000000
+#define DDRSS_PHY_1078_DATA 0x00000000
+#define DDRSS_PHY_1079_DATA 0x00000000
+#define DDRSS_PHY_1080_DATA 0x00000000
+#define DDRSS_PHY_1081_DATA 0x00000000
+#define DDRSS_PHY_1082_DATA 0x00000000
+#define DDRSS_PHY_1083_DATA 0x00000000
+#define DDRSS_PHY_1084_DATA 0x00000000
+#define DDRSS_PHY_1085_DATA 0x00000000
+#define DDRSS_PHY_1086_DATA 0x00000000
+#define DDRSS_PHY_1087_DATA 0x00000000
+#define DDRSS_PHY_1088_DATA 0x00000000
+#define DDRSS_PHY_1089_DATA 0x00000000
+#define DDRSS_PHY_1090_DATA 0x00000000
+#define DDRSS_PHY_1091_DATA 0x00000000
+#define DDRSS_PHY_1092_DATA 0x00000000
+#define DDRSS_PHY_1093_DATA 0x00000000
+#define DDRSS_PHY_1094_DATA 0x00000000
+#define DDRSS_PHY_1095_DATA 0x00000000
+#define DDRSS_PHY_1096_DATA 0x00000000
+#define DDRSS_PHY_1097_DATA 0x00000000
+#define DDRSS_PHY_1098_DATA 0x00000000
+#define DDRSS_PHY_1099_DATA 0x00000000
+#define DDRSS_PHY_1100_DATA 0x00000000
+#define DDRSS_PHY_1101_DATA 0x00000000
+#define DDRSS_PHY_1102_DATA 0x00000000
+#define DDRSS_PHY_1103_DATA 0x00000000
+#define DDRSS_PHY_1104_DATA 0x00000000
+#define DDRSS_PHY_1105_DATA 0x00000000
+#define DDRSS_PHY_1106_DATA 0x00000000
+#define DDRSS_PHY_1107_DATA 0x00000000
+#define DDRSS_PHY_1108_DATA 0x00000000
+#define DDRSS_PHY_1109_DATA 0x00000000
+#define DDRSS_PHY_1110_DATA 0x00000000
+#define DDRSS_PHY_1111_DATA 0x00000000
+#define DDRSS_PHY_1112_DATA 0x00000000
+#define DDRSS_PHY_1113_DATA 0x00000000
+#define DDRSS_PHY_1114_DATA 0x00000000
+#define DDRSS_PHY_1115_DATA 0x00000000
+#define DDRSS_PHY_1116_DATA 0x00000000
+#define DDRSS_PHY_1117_DATA 0x00000000
+#define DDRSS_PHY_1118_DATA 0x00000000
+#define DDRSS_PHY_1119_DATA 0x00000000
+#define DDRSS_PHY_1120_DATA 0x00000000
+#define DDRSS_PHY_1121_DATA 0x00000000
+#define DDRSS_PHY_1122_DATA 0x00000000
+#define DDRSS_PHY_1123_DATA 0x00000000
+#define DDRSS_PHY_1124_DATA 0x00000000
+#define DDRSS_PHY_1125_DATA 0x00000000
+#define DDRSS_PHY_1126_DATA 0x00000000
+#define DDRSS_PHY_1127_DATA 0x00000000
+#define DDRSS_PHY_1128_DATA 0x00000000
+#define DDRSS_PHY_1129_DATA 0x00000000
+#define DDRSS_PHY_1130_DATA 0x00000000
+#define DDRSS_PHY_1131_DATA 0x00000000
+#define DDRSS_PHY_1132_DATA 0x00000000
+#define DDRSS_PHY_1133_DATA 0x00000000
+#define DDRSS_PHY_1134_DATA 0x00000000
+#define DDRSS_PHY_1135_DATA 0x00000000
+#define DDRSS_PHY_1136_DATA 0x00000000
+#define DDRSS_PHY_1137_DATA 0x00000000
+#define DDRSS_PHY_1138_DATA 0x00000000
+#define DDRSS_PHY_1139_DATA 0x00000000
+#define DDRSS_PHY_1140_DATA 0x00000000
+#define DDRSS_PHY_1141_DATA 0x00000000
+#define DDRSS_PHY_1142_DATA 0x00000000
+#define DDRSS_PHY_1143_DATA 0x00000000
+#define DDRSS_PHY_1144_DATA 0x00000000
+#define DDRSS_PHY_1145_DATA 0x00000000
+#define DDRSS_PHY_1146_DATA 0x00000000
+#define DDRSS_PHY_1147_DATA 0x00000000
+#define DDRSS_PHY_1148_DATA 0x00000000
+#define DDRSS_PHY_1149_DATA 0x00000000
+#define DDRSS_PHY_1150_DATA 0x00000000
+#define DDRSS_PHY_1151_DATA 0x00000000
+#define DDRSS_PHY_1152_DATA 0x00000000
+#define DDRSS_PHY_1153_DATA 0x00000000
+#define DDRSS_PHY_1154_DATA 0x00000000
+#define DDRSS_PHY_1155_DATA 0x00000000
+#define DDRSS_PHY_1156_DATA 0x00000000
+#define DDRSS_PHY_1157_DATA 0x00000000
+#define DDRSS_PHY_1158_DATA 0x00000000
+#define DDRSS_PHY_1159_DATA 0x00000000
+#define DDRSS_PHY_1160_DATA 0x00000000
+#define DDRSS_PHY_1161_DATA 0x00000000
+#define DDRSS_PHY_1162_DATA 0x00000000
+#define DDRSS_PHY_1163_DATA 0x00000000
+#define DDRSS_PHY_1164_DATA 0x00000000
+#define DDRSS_PHY_1165_DATA 0x00000000
+#define DDRSS_PHY_1166_DATA 0x00000000
+#define DDRSS_PHY_1167_DATA 0x00000000
+#define DDRSS_PHY_1168_DATA 0x00000000
+#define DDRSS_PHY_1169_DATA 0x00000000
+#define DDRSS_PHY_1170_DATA 0x00000000
+#define DDRSS_PHY_1171_DATA 0x00000000
+#define DDRSS_PHY_1172_DATA 0x00000000
+#define DDRSS_PHY_1173_DATA 0x00000000
+#define DDRSS_PHY_1174_DATA 0x00000000
+#define DDRSS_PHY_1175_DATA 0x00000000
+#define DDRSS_PHY_1176_DATA 0x00000000
+#define DDRSS_PHY_1177_DATA 0x00000000
+#define DDRSS_PHY_1178_DATA 0x00000000
+#define DDRSS_PHY_1179_DATA 0x00000000
+#define DDRSS_PHY_1180_DATA 0x00000000
+#define DDRSS_PHY_1181_DATA 0x00000000
+#define DDRSS_PHY_1182_DATA 0x00000000
+#define DDRSS_PHY_1183_DATA 0x00000000
+#define DDRSS_PHY_1184_DATA 0x00000000
+#define DDRSS_PHY_1185_DATA 0x00000000
+#define DDRSS_PHY_1186_DATA 0x00000000
+#define DDRSS_PHY_1187_DATA 0x00000000
+#define DDRSS_PHY_1188_DATA 0x00000000
+#define DDRSS_PHY_1189_DATA 0x00000000
+#define DDRSS_PHY_1190_DATA 0x00000000
+#define DDRSS_PHY_1191_DATA 0x00000000
+#define DDRSS_PHY_1192_DATA 0x00000000
+#define DDRSS_PHY_1193_DATA 0x00000000
+#define DDRSS_PHY_1194_DATA 0x00000000
+#define DDRSS_PHY_1195_DATA 0x00000000
+#define DDRSS_PHY_1196_DATA 0x00000000
+#define DDRSS_PHY_1197_DATA 0x00000000
+#define DDRSS_PHY_1198_DATA 0x00000000
+#define DDRSS_PHY_1199_DATA 0x00000000
+#define DDRSS_PHY_1200_DATA 0x00000000
+#define DDRSS_PHY_1201_DATA 0x00000000
+#define DDRSS_PHY_1202_DATA 0x00000000
+#define DDRSS_PHY_1203_DATA 0x00000000
+#define DDRSS_PHY_1204_DATA 0x00000000
+#define DDRSS_PHY_1205_DATA 0x00000000
+#define DDRSS_PHY_1206_DATA 0x00000000
+#define DDRSS_PHY_1207_DATA 0x00000000
+#define DDRSS_PHY_1208_DATA 0x00000000
+#define DDRSS_PHY_1209_DATA 0x00000000
+#define DDRSS_PHY_1210_DATA 0x00000000
+#define DDRSS_PHY_1211_DATA 0x00000000
+#define DDRSS_PHY_1212_DATA 0x00000000
+#define DDRSS_PHY_1213_DATA 0x00000000
+#define DDRSS_PHY_1214_DATA 0x00000000
+#define DDRSS_PHY_1215_DATA 0x00000000
+#define DDRSS_PHY_1216_DATA 0x00000000
+#define DDRSS_PHY_1217_DATA 0x00000000
+#define DDRSS_PHY_1218_DATA 0x00000000
+#define DDRSS_PHY_1219_DATA 0x00000000
+#define DDRSS_PHY_1220_DATA 0x00000000
+#define DDRSS_PHY_1221_DATA 0x00000000
+#define DDRSS_PHY_1222_DATA 0x00000000
+#define DDRSS_PHY_1223_DATA 0x00000000
+#define DDRSS_PHY_1224_DATA 0x00000000
+#define DDRSS_PHY_1225_DATA 0x00000000
+#define DDRSS_PHY_1226_DATA 0x00000000
+#define DDRSS_PHY_1227_DATA 0x00000000
+#define DDRSS_PHY_1228_DATA 0x00000000
+#define DDRSS_PHY_1229_DATA 0x00000000
+#define DDRSS_PHY_1230_DATA 0x00000000
+#define DDRSS_PHY_1231_DATA 0x00000000
+#define DDRSS_PHY_1232_DATA 0x00000000
+#define DDRSS_PHY_1233_DATA 0x00000000
+#define DDRSS_PHY_1234_DATA 0x00000000
+#define DDRSS_PHY_1235_DATA 0x00000000
+#define DDRSS_PHY_1236_DATA 0x00000000
+#define DDRSS_PHY_1237_DATA 0x00000000
+#define DDRSS_PHY_1238_DATA 0x00000000
+#define DDRSS_PHY_1239_DATA 0x00000000
+#define DDRSS_PHY_1240_DATA 0x00000000
+#define DDRSS_PHY_1241_DATA 0x00000000
+#define DDRSS_PHY_1242_DATA 0x00000000
+#define DDRSS_PHY_1243_DATA 0x00000000
+#define DDRSS_PHY_1244_DATA 0x00000000
+#define DDRSS_PHY_1245_DATA 0x00000000
+#define DDRSS_PHY_1246_DATA 0x00000000
+#define DDRSS_PHY_1247_DATA 0x00000000
+#define DDRSS_PHY_1248_DATA 0x00000000
+#define DDRSS_PHY_1249_DATA 0x00000000
+#define DDRSS_PHY_1250_DATA 0x00000000
+#define DDRSS_PHY_1251_DATA 0x00000000
+#define DDRSS_PHY_1252_DATA 0x00000000
+#define DDRSS_PHY_1253_DATA 0x00000000
+#define DDRSS_PHY_1254_DATA 0x00000000
+#define DDRSS_PHY_1255_DATA 0x00000000
+#define DDRSS_PHY_1256_DATA 0x00000000
+#define DDRSS_PHY_1257_DATA 0x00000000
+#define DDRSS_PHY_1258_DATA 0x00000000
+#define DDRSS_PHY_1259_DATA 0x00000000
+#define DDRSS_PHY_1260_DATA 0x00000000
+#define DDRSS_PHY_1261_DATA 0x00000000
+#define DDRSS_PHY_1262_DATA 0x00000000
+#define DDRSS_PHY_1263_DATA 0x00000000
+#define DDRSS_PHY_1264_DATA 0x00000000
+#define DDRSS_PHY_1265_DATA 0x00000000
+#define DDRSS_PHY_1266_DATA 0x00000000
+#define DDRSS_PHY_1267_DATA 0x00000000
+#define DDRSS_PHY_1268_DATA 0x00000000
+#define DDRSS_PHY_1269_DATA 0x00000000
+#define DDRSS_PHY_1270_DATA 0x00000000
+#define DDRSS_PHY_1271_DATA 0x00000000
+#define DDRSS_PHY_1272_DATA 0x00000000
+#define DDRSS_PHY_1273_DATA 0x00000000
+#define DDRSS_PHY_1274_DATA 0x00000000
+#define DDRSS_PHY_1275_DATA 0x00000000
+#define DDRSS_PHY_1276_DATA 0x00000000
+#define DDRSS_PHY_1277_DATA 0x00000000
+#define DDRSS_PHY_1278_DATA 0x00000000
+#define DDRSS_PHY_1279_DATA 0x00000000
+#define DDRSS_PHY_1280_DATA 0x00000000
+#define DDRSS_PHY_1281_DATA 0x00010100
+#define DDRSS_PHY_1282_DATA 0x00000000
+#define DDRSS_PHY_1283_DATA 0x00000000
+#define DDRSS_PHY_1284_DATA 0x00050000
+#define DDRSS_PHY_1285_DATA 0x04000000
+#define DDRSS_PHY_1286_DATA 0x00000055
+#define DDRSS_PHY_1287_DATA 0x00000000
+#define DDRSS_PHY_1288_DATA 0x00000000
+#define DDRSS_PHY_1289_DATA 0x00000000
+#define DDRSS_PHY_1290_DATA 0x00000000
+#define DDRSS_PHY_1291_DATA 0x00002001
+#define DDRSS_PHY_1292_DATA 0x0000400F
+#define DDRSS_PHY_1293_DATA 0x50020028
+#define DDRSS_PHY_1294_DATA 0x01010000
+#define DDRSS_PHY_1295_DATA 0x80080001
+#define DDRSS_PHY_1296_DATA 0x10200000
+#define DDRSS_PHY_1297_DATA 0x00000008
+#define DDRSS_PHY_1298_DATA 0x00000000
+#define DDRSS_PHY_1299_DATA 0x01090E00
+#define DDRSS_PHY_1300_DATA 0x00040101
+#define DDRSS_PHY_1301_DATA 0x0000010F
+#define DDRSS_PHY_1302_DATA 0x00000000
+#define DDRSS_PHY_1303_DATA 0x0000FFFF
+#define DDRSS_PHY_1304_DATA 0x00000000
+#define DDRSS_PHY_1305_DATA 0x01010000
+#define DDRSS_PHY_1306_DATA 0x01080402
+#define DDRSS_PHY_1307_DATA 0x01200F02
+#define DDRSS_PHY_1308_DATA 0x00194280
+#define DDRSS_PHY_1309_DATA 0x00000004
+#define DDRSS_PHY_1310_DATA 0x00050000
+#define DDRSS_PHY_1311_DATA 0x00000000
+#define DDRSS_PHY_1312_DATA 0x00000000
+#define DDRSS_PHY_1313_DATA 0x00000000
+#define DDRSS_PHY_1314_DATA 0x00000000
+#define DDRSS_PHY_1315_DATA 0x00000000
+#define DDRSS_PHY_1316_DATA 0x00000000
+#define DDRSS_PHY_1317_DATA 0x01000000
+#define DDRSS_PHY_1318_DATA 0x00000705
+#define DDRSS_PHY_1319_DATA 0x00000054
+#define DDRSS_PHY_1320_DATA 0x00030820
+#define DDRSS_PHY_1321_DATA 0x00010820
+#define DDRSS_PHY_1322_DATA 0x00010820
+#define DDRSS_PHY_1323_DATA 0x00010820
+#define DDRSS_PHY_1324_DATA 0x00010820
+#define DDRSS_PHY_1325_DATA 0x00010820
+#define DDRSS_PHY_1326_DATA 0x00010820
+#define DDRSS_PHY_1327_DATA 0x00010820
+#define DDRSS_PHY_1328_DATA 0x00010820
+#define DDRSS_PHY_1329_DATA 0x00000000
+#define DDRSS_PHY_1330_DATA 0x00000074
+#define DDRSS_PHY_1331_DATA 0x00000400
+#define DDRSS_PHY_1332_DATA 0x00000108
+#define DDRSS_PHY_1333_DATA 0x00000000
+#define DDRSS_PHY_1334_DATA 0x00000000
+#define DDRSS_PHY_1335_DATA 0x00000000
+#define DDRSS_PHY_1336_DATA 0x00000000
+#define DDRSS_PHY_1337_DATA 0x00000000
+#define DDRSS_PHY_1338_DATA 0x03000000
+#define DDRSS_PHY_1339_DATA 0x00000000
+#define DDRSS_PHY_1340_DATA 0x00000000
+#define DDRSS_PHY_1341_DATA 0x00000000
+#define DDRSS_PHY_1342_DATA 0x04102006
+#define DDRSS_PHY_1343_DATA 0x00041020
+#define DDRSS_PHY_1344_DATA 0x01C98C98
+#define DDRSS_PHY_1345_DATA 0x3F400000
+#define DDRSS_PHY_1346_DATA 0x3F3F1F3F
+#define DDRSS_PHY_1347_DATA 0x0000001F
+#define DDRSS_PHY_1348_DATA 0x00000000
+#define DDRSS_PHY_1349_DATA 0x00000000
+#define DDRSS_PHY_1350_DATA 0x00000000
+#define DDRSS_PHY_1351_DATA 0x00010000
+#define DDRSS_PHY_1352_DATA 0x00000000
+#define DDRSS_PHY_1353_DATA 0x00000000
+#define DDRSS_PHY_1354_DATA 0x00000000
+#define DDRSS_PHY_1355_DATA 0x00000000
+#define DDRSS_PHY_1356_DATA 0x76543210
+#define DDRSS_PHY_1357_DATA 0x00010198
+#define DDRSS_PHY_1358_DATA 0x00000000
+#define DDRSS_PHY_1359_DATA 0x00000000
+#define DDRSS_PHY_1360_DATA 0x00000000
+#define DDRSS_PHY_1361_DATA 0x00040700
+#define DDRSS_PHY_1362_DATA 0x00000000
+#define DDRSS_PHY_1363_DATA 0x00000000
+#define DDRSS_PHY_1364_DATA 0x00000000
+#define DDRSS_PHY_1365_DATA 0x00000000
+#define DDRSS_PHY_1366_DATA 0x00000000
+#define DDRSS_PHY_1367_DATA 0x00000002
+#define DDRSS_PHY_1368_DATA 0x00000000
+#define DDRSS_PHY_1369_DATA 0x00000000
+#define DDRSS_PHY_1370_DATA 0x00000000
+#define DDRSS_PHY_1371_DATA 0x00000000
+#define DDRSS_PHY_1372_DATA 0x00000000
+#define DDRSS_PHY_1373_DATA 0x00000000
+#define DDRSS_PHY_1374_DATA 0x00080000
+#define DDRSS_PHY_1375_DATA 0x000007FF
+#define DDRSS_PHY_1376_DATA 0x00000000
+#define DDRSS_PHY_1377_DATA 0x00000000
+#define DDRSS_PHY_1378_DATA 0x00000000
+#define DDRSS_PHY_1379_DATA 0x00000000
+#define DDRSS_PHY_1380_DATA 0x00000000
+#define DDRSS_PHY_1381_DATA 0x00000000
+#define DDRSS_PHY_1382_DATA 0x000FFFFF
+#define DDRSS_PHY_1383_DATA 0x000FFFFF
+#define DDRSS_PHY_1384_DATA 0x0000FFFF
+#define DDRSS_PHY_1385_DATA 0xFFFFFFF0
+#define DDRSS_PHY_1386_DATA 0x030FFFFF
+#define DDRSS_PHY_1387_DATA 0x01FFFFFF
+#define DDRSS_PHY_1388_DATA 0x0000FFFF
+#define DDRSS_PHY_1389_DATA 0x00000000
+#define DDRSS_PHY_1390_DATA 0x00000000
+#define DDRSS_PHY_1391_DATA 0x00000000
+#define DDRSS_PHY_1392_DATA 0x00000000
+#define DDRSS_PHY_1393_DATA 0x0001F7C0
+#define DDRSS_PHY_1394_DATA 0x00000002
+#define DDRSS_PHY_1395_DATA 0x00000000
+#define DDRSS_PHY_1396_DATA 0x00001142
+#define DDRSS_PHY_1397_DATA 0x010207AB
+#define DDRSS_PHY_1398_DATA 0x01000080
+#define DDRSS_PHY_1399_DATA 0x03900390
+#define DDRSS_PHY_1400_DATA 0x03900390
+#define DDRSS_PHY_1401_DATA 0x00000390
+#define DDRSS_PHY_1402_DATA 0x00000390
+#define DDRSS_PHY_1403_DATA 0x00000390
+#define DDRSS_PHY_1404_DATA 0x00000390
+#define DDRSS_PHY_1405_DATA 0x00000005
+#define DDRSS_PHY_1406_DATA 0x01813FBB
+#define DDRSS_PHY_1407_DATA 0x000000BB
+#define DDRSS_PHY_1408_DATA 0x0C000DFF
+#define DDRSS_PHY_1409_DATA 0x30000DFF
+#define DDRSS_PHY_1410_DATA 0x3F0DFF11
+#define DDRSS_PHY_1411_DATA 0x000100F0
+#define DDRSS_PHY_1412_DATA 0x780DFFBB
+#define DDRSS_PHY_1413_DATA 0x00007E31
+#define DDRSS_PHY_1414_DATA 0x000CBF11
+#define DDRSS_PHY_1415_DATA 0x01770010
+#define DDRSS_PHY_1416_DATA 0x000CBF11
+#define DDRSS_PHY_1417_DATA 0x01770010
+#define DDRSS_PHY_1418_DATA 0x3F0DFF11
+#define DDRSS_PHY_1419_DATA 0x017700F0
+#define DDRSS_PHY_1420_DATA 0x3F0DFF11
+#define DDRSS_PHY_1421_DATA 0x01FF00F0
+#define DDRSS_PHY_1422_DATA 0x20040006
diff --git a/arch/arm/dts/k3-j7200-r5-common-proc-board.dts b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
new file mode 100644
index 0000000000..ffd0d09ece
--- /dev/null
+++ b/arch/arm/dts/k3-j7200-r5-common-proc-board.dts
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j7200-som-p0.dtsi"
+#include "k3-j7200-ddr-evm-lp4-1600.dtsi"
+#include "k3-j721e-ddr.dtsi"
+
+/ {
+	aliases {
+		remoteproc0 = &sysctrler;
+		remoteproc1 = &a72_0;
+	};
+
+	chosen {
+		stdout-path = &main_uart0;
+		tick-timer = &timer1;
+	};
+
+	a72_0: a72 at 0 {
+		compatible = "ti,am654-rproc";
+		reg = <0x0 0x00a90000 0x0 0x10>;
+		power-domains = <&k3_pds 61 TI_SCI_PD_EXCLUSIVE>,
+				<&k3_pds 202 TI_SCI_PD_EXCLUSIVE>;
+		resets = <&k3_reset 202 0>;
+		assigned-clocks = <&k3_clks 202 2>, <&k3_clks 61 1>;
+		assigned-clock-rates = <2000000000>, <200000000>;
+		ti,sci = <&dmsc>;
+		ti,sci-proc-id = <32>;
+		ti,sci-host-id = <10>;
+		u-boot,dm-spl;
+	};
+
+	clk_200mhz: dummy_clock_200mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		u-boot,dm-spl;
+	};
+
+	clk_19_2mhz: dummy_clock_19_2mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <19200000>;
+		u-boot,dm-spl;
+	};
+};
+
+&memorycontroller {
+	power-domains = <&k3_pds 8 TI_SCI_PD_SHARED>,
+			<&k3_pds 90 TI_SCI_PD_SHARED>;
+	clocks = <&k3_clks 8 5>, <&k3_clks 30 9>;
+};
+
+&cbass_mcu_wakeup {
+	mcu_secproxy: secproxy at 2a380000 {
+		u-boot,dm-spl;
+		compatible = "ti,am654-secure-proxy";
+		reg = <0x0 0x2a380000 0x0 0x80000>,
+		      <0x0 0x2a400000 0x0 0x80000>,
+		      <0x0 0x2a480000 0x0 0x80000>;
+		reg-names = "rt", "scfg", "target_data";
+		#mbox-cells = <1>;
+	};
+
+	sysctrler: sysctrler {
+		u-boot,dm-spl;
+		compatible = "ti,am654-system-controller";
+		mboxes= <&mcu_secproxy 4>, <&mcu_secproxy 5>;
+		mbox-names = "tx", "rx";
+	};
+};
+
+&dmsc {
+	mboxes= <&mcu_secproxy 8>, <&mcu_secproxy 6>, <&mcu_secproxy 5>;
+	mbox-names = "tx", "rx", "notify";
+	ti,host-id = <4>;
+	ti,secure-host;
+};
+
+&wkup_pmx0 {
+	u-boot,dm-spl;
+	wkup_uart0_pins_default: wkup_uart0_pins_default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xb0, PIN_INPUT, 0) /* (B14) WKUP_UART0_RXD */
+			J721E_WKUP_IOPAD(0xb4, PIN_OUTPUT, 0) /* (A14) WKUP_UART0_TXD */
+		>;
+	};
+
+	mcu_uart0_pins_default: mcu_uart0_pins_default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0xf4, PIN_INPUT, 0) /* (D20) WKUP_GPIO0_13.MCU_UART0_RXD */
+			J721E_WKUP_IOPAD(0xf0, PIN_OUTPUT, 0) /* (D19) WKUP_GPIO0_12.MCU_UART0_TXD */
+			J721E_WKUP_IOPAD(0xf8, PIN_INPUT, 0) /* (E20) WKUP_GPIO0_14.MCU_UART0_CTSn */
+			J721E_WKUP_IOPAD(0xfc, PIN_OUTPUT, 0) /* (E21) WKUP_GPIO0_15.MCU_UART0_RTSn */
+		>;
+	};
+
+	wkup_i2c0_pins_default: wkup-i2c0-pins-default {
+		pinctrl-single,pins = <
+			J721E_WKUP_IOPAD(0x100, PIN_INPUT_PULLUP, 0) /* (F20) WKUP_I2C0_SCL */
+			J721E_WKUP_IOPAD(0x104, PIN_INPUT_PULLUP, 0) /* (H21) WKUP_I2C0_SDA */
+		>;
+	};
+};
+
+&main_pmx0 {
+	u-boot,dm-spl;
+
+	main_uart0_pins_default: main_uart0_pins_default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xb0, PIN_INPUT, 0) /* (T16) UART0_RXD */
+			J721E_IOPAD(0xb4, PIN_OUTPUT, 0) /* (T17) UART0_TXD */
+			J721E_IOPAD(0xc0, PIN_INPUT, 2) /* (W3) SPI0_CS0.UART0_CTSn */
+			J721E_IOPAD(0xc4, PIN_OUTPUT, 2) /* (U5) SPI0_CS1.UART0_RTSn */
+		>;
+	};
+
+	main_i2c0_pins_default: main-i2c0-pins-default {
+		u-boot,dm-spl;
+		pinctrl-single,pins = <
+			J721E_IOPAD(0xd4, PIN_INPUT_PULLUP, 0) /* (V3) I2C0_SCL */
+			J721E_IOPAD(0xd8, PIN_INPUT_PULLUP, 0) /* (W2) I2C0_SDA */
+		>;
+	};
+};
+
+&wkup_uart0 {
+	u-boot,dm-spl;
+	pinctrl-names = "default";
+	pinctrl-0 = <&wkup_uart0_pins_default>;
+	status = "okay";
+};
+
+&mcu_uart0 {
+	/delete-property/ power-domains;
+	/delete-property/ clocks;
+	/delete-property/ clock-names;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mcu_uart0_pins_default>;
+	status = "okay";
+	clock-frequency = <96000000>;
+};
+
+&main_uart0 {
+	status = "okay";
+	power-domains = <&k3_pds 146 TI_SCI_PD_SHARED>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_uart0_pins_default>;
+	status = "okay";
+};
+
+&main_sdhci0 {
+	/delete-property/ power-domains;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	clock-names = "clk_xin";
+	clocks = <&clk_200mhz>;
+	ti,driver-strength-ohm = <50>;
+	non-removable;
+	bus-width = <8>;
+};
+
+&main_sdhci1 {
+	/delete-property/ power-domains;
+	/delete-property/ assigned-clocks;
+	/delete-property/ assigned-clock-parents;
+	clock-names = "clk_xin";
+	clocks = <&clk_200mhz>;
+	ti,driver-strength-ohm = <50>;
+};
+
+&main_i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c0_pins_default>;
+	clock-frequency = <400000>;
+
+	exp1: gpio at 20 {
+		compatible = "ti,tca6416";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+
+	exp2: gpio at 22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};
+
+#include "k3-j7200-common-proc-board-u-boot.dtsi"
-- 
2.27.0

[PATCH v2 17/18] configs: j7200_evm_r5: Add initial support

[Lokesh Vutla]

Add initial R5 defconfig support

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 configs/j7200_evm_r5_defconfig | 126 +++++++++++++++++++++++++++++++++
 1 file changed, 126 insertions(+)
 create mode 100644 configs/j7200_evm_r5_defconfig

diff --git a/configs/j7200_evm_r5_defconfig b/configs/j7200_evm_r5_defconfig
new file mode 100644
index 0000000000..c387cb7ccb
--- /dev/null
+++ b/configs/j7200_evm_r5_defconfig
@@ -0,0 +1,126 @@
+CONFIG_ARM=y
+CONFIG_ARCH_K3=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x70000
+CONFIG_SOC_K3_J721E=y
+CONFIG_K3_EARLY_CONS=y
+CONFIG_TARGET_J7200_R5_EVM=y
+CONFIG_ENV_SIZE=0x20000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
+CONFIG_DM_GPIO=y
+CONFIG_SPL_DM_SPI=y
+CONFIG_SPL_TEXT_BASE=0x41c00000
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_SPL_FS_FAT=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_DEFAULT_DEVICE_TREE="k3-j7200-r5-common-proc-board"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_USE_BOOTCOMMAND=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SPL_EARLY_BSS=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
+CONFIG_SPL_DMA=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_DM_MAILBOX=y
+CONFIG_SPL_DM_SPI_FLASH=y
+CONFIG_SPL_DM_RESET=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
+CONFIG_SPL_REMOTEPROC=y
+# CONFIG_SPL_SPI_FLASH_TINY is not set
+CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_DFU=y
+CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_DFU=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_REMOTEPROC=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_CMD_FAT=y
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_TI_SCI=y
+CONFIG_DMA_CHANNELS=y
+CONFIG_TI_K3_NAVSS_UDMA=y
+CONFIG_TI_SCI_PROTOCOL=y
+CONFIG_DA8XX_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_OMAP24XX=y
+CONFIG_DM_MAILBOX=y
+CONFIG_K3_SEC_PROXY=y
+CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_SPL_MMC_HS400_SUPPORT=y
+CONFIG_MMC_SDHCI=y
+CONFIG_SPL_MMC_SDHCI_ADMA=y
+CONFIG_MMC_SDHCI_AM654=y
+CONFIG_MTD=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_GENERIC is not set
+CONFIG_SPL_PINCTRL=y
+# CONFIG_SPL_PINCTRL_GENERIC is not set
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_TI_SCI_POWER_DOMAIN=y
+CONFIG_K3_SYSTEM_CONTROLLER=y
+CONFIG_REMOTEPROC_TI_K3_ARM64=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_TI_SCI=y
+CONFIG_DM_SERIAL=y
+CONFIG_SOC_TI=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_SYSRESET_TI_SCI=y
+CONFIG_TIMER=y
+CONFIG_SPL_TIMER=y
+CONFIG_OMAP_TIMER=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_SPL_DM_USB_GADGET=y
+CONFIG_USB_CDNS3=y
+CONFIG_USB_CDNS3_GADGET=y
+CONFIG_SPL_USB_CDNS3_GADGET=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0x6163
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_FS_EXT4=y
+CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
-- 
2.27.0

[PATCH v2 18/18] configs: j7200_evm_a72: Add Initial support

[Lokesh Vutla]

Add initial A72 defconfig support.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 configs/j7200_evm_a72_defconfig | 172 ++++++++++++++++++++++++++++++++
 1 file changed, 172 insertions(+)
 create mode 100644 configs/j7200_evm_a72_defconfig

diff --git a/configs/j7200_evm_a72_defconfig b/configs/j7200_evm_a72_defconfig
new file mode 100644
index 0000000000..14c30a8f28
--- /dev/null
+++ b/configs/j7200_evm_a72_defconfig
@@ -0,0 +1,172 @@
+CONFIG_ARM=y
+CONFIG_ARCH_K3=y
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_SPL_LIBCOMMON_SUPPORT=y
+CONFIG_SPL_LIBGENERIC_SUPPORT=y
+CONFIG_SYS_MALLOC_F_LEN=0x8000
+CONFIG_SOC_K3_J721E=y
+CONFIG_TARGET_J7200_A72_EVM=y
+CONFIG_ENV_SIZE=0x20000
+CONFIG_ENV_OFFSET=0x680000
+CONFIG_SYS_SPI_U_BOOT_OFFS=0x280000
+CONFIG_DM_GPIO=y
+CONFIG_SPL_DM_SPI=y
+CONFIG_SPL_TEXT_BASE=0x80080000
+CONFIG_SPL_MMC_SUPPORT=y
+CONFIG_SPL_SERIAL_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_NR_DRAM_BANKS=2
+CONFIG_ENV_OFFSET_REDUND=0x6A0000
+CONFIG_SPL_FS_FAT=y
+CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
+# CONFIG_PSCI_RESET is not set
+CONFIG_DEFAULT_DEVICE_TREE="k3-j7200-common-proc-board"
+CONFIG_DISTRO_DEFAULTS=y
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_BOOTCOMMAND="run findfdt; run envboot; run init_${boot}; run get_kern_${boot}; run get_fdt_${boot}; run get_overlay_${boot}; run run_kern"
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_BOARD_INIT=y
+CONFIG_SPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_SEPARATE_BSS=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
+CONFIG_SPL_DMA=y
+CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_DM_MAILBOX=y
+CONFIG_SPL_DM_SPI_FLASH=y
+CONFIG_SPL_DM_RESET=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_POWER_DOMAIN=y
+CONFIG_SPL_RAM_SUPPORT=y
+CONFIG_SPL_RAM_DEVICE=y
+# CONFIG_SPL_SPI_FLASH_TINY is not set
+CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
+CONFIG_SPL_SPI_LOAD=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_DFU=y
+CONFIG_SPL_YMODEM_SUPPORT=y
+CONFIG_CMD_ASKENV=y
+CONFIG_CMD_DFU=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_MTD=y
+CONFIG_CMD_REMOTEPROC=y
+CONFIG_CMD_UFS=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_TIME=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_MTDIDS_DEFAULT="nor0=47040000.spi.0,nor0=47034000.hyperbus"
+CONFIG_MTDPARTS_DEFAULT="mtdparts=47040000.spi.0:512k(ospi.tiboot3),2m(ospi.tispl),4m(ospi.u-boot),128k(ospi.env),128k(ospi.env.backup),1m(ospi.sysfw),- at 8m(ospi.rootfs);47034000.hyperbus:512k(hbmc.tiboot3),2m(hbmc.tispl),4m(hbmc.u-boot),256k(hbmc.env),1m(hbmc.sysfw),- at 8m(hbmc.rootfs)"
+CONFIG_CMD_UBI=y
+# CONFIG_ISO_PARTITION is not set
+# CONFIG_SPL_EFI_PARTITION is not set
+CONFIG_OF_CONTROL=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_SPL_MULTI_DTB_FIT=y
+CONFIG_SPL_MULTI_DTB_FIT_NO_COMPRESSION=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_DM=y
+CONFIG_SPL_DM=y
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_OF_TRANSLATE=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_CLK_TI_SCI=y
+CONFIG_DFU_MMC=y
+CONFIG_DFU_RAM=y
+CONFIG_DFU_SF=y
+CONFIG_DMA_CHANNELS=y
+CONFIG_TI_K3_NAVSS_UDMA=y
+CONFIG_USB_FUNCTION_FASTBOOT=y
+CONFIG_FASTBOOT_BUF_ADDR=0x82000000
+CONFIG_FASTBOOT_BUF_SIZE=0x2F000000
+CONFIG_FASTBOOT_FLASH=y
+CONFIG_FASTBOOT_FLASH_MMC_DEV=0
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_TI_SCI_PROTOCOL=y
+CONFIG_DA8XX_GPIO=y
+CONFIG_DM_PCA953X=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_OMAP24XX=y
+CONFIG_DM_MAILBOX=y
+CONFIG_K3_SEC_PROXY=y
+CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ADMA=y
+CONFIG_SPL_MMC_SDHCI_ADMA=y
+CONFIG_MMC_SDHCI_AM654=y
+CONFIG_MTD=y
+CONFIG_DM_MTD=y
+CONFIG_MTD_NOR_FLASH=y
+CONFIG_FLASH_CFI_DRIVER=y
+CONFIG_CFI_FLASH=y
+CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
+CONFIG_FLASH_CFI_MTD=y
+CONFIG_SYS_FLASH_CFI=y
+CONFIG_HBMC_AM654=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_SPI_FLASH_STMICRO=y
+# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_PHY_FIXED=y
+CONFIG_DM_ETH=y
+CONFIG_TI_AM65_CPSW_NUSS=y
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_GENERIC is not set
+CONFIG_SPL_PINCTRL=y
+# CONFIG_SPL_PINCTRL_GENERIC is not set
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_POWER_DOMAIN=y
+CONFIG_TI_SCI_POWER_DOMAIN=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_REMOTEPROC_TI_K3_DSP=y
+CONFIG_REMOTEPROC_TI_K3_R5F=y
+CONFIG_DM_RESET=y
+CONFIG_RESET_TI_SCI=y
+CONFIG_SCSI=y
+CONFIG_DM_SCSI=y
+CONFIG_DM_SERIAL=y
+CONFIG_SOC_TI=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
+CONFIG_CADENCE_QSPI=y
+CONFIG_SYSRESET=y
+CONFIG_SPL_SYSRESET=y
+CONFIG_SYSRESET_TI_SCI=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_SPL_DM_USB_GADGET=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_CDNS3=y
+CONFIG_USB_CDNS3_GADGET=y
+CONFIG_USB_CDNS3_HOST=y
+CONFIG_SPL_USB_CDNS3_GADGET=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0x6163
+CONFIG_UFS=y
+CONFIG_CADENCE_UFS=y
+CONFIG_TI_J721E_UFS=y
+CONFIG_OF_LIBFDT_OVERLAY=y
-- 
2.27.0

[PATCH v2 18/18] configs: j7200_evm_a72: Add Initial support

[Vignesh Raghavendra]

On 27/07/20 3:15 pm, Lokesh Vutla wrote:
> Add initial A72 defconfig support.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---
>   configs/j7200_evm_a72_defconfig | 172 ++++++++++++++++++++++++++++++++
>   1 file changed, 172 insertions(+)
>   create mode 100644 configs/j7200_evm_a72_defconfig
> 
> diff --git a/configs/j7200_evm_a72_defconfig b/configs/j7200_evm_a72_defconfig
> new file mode 100644
> index 0000000000..14c30a8f28
> --- /dev/null
> +++ b/configs/j7200_evm_a72_defconfig
[...]
> +CONFIG_USB_CDNS3=y
> +CONFIG_USB_CDNS3_GADGET=y
> +CONFIG_USB_CDNS3_HOST=y
> +CONFIG_SPL_USB_CDNS3_GADGET=y
> +CONFIG_USB_GADGET=y
> +CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
> +CONFIG_USB_GADGET_VENDOR_NUM=0x0451
> +CONFIG_USB_GADGET_PRODUCT_NUM=0x6163

This is for J721e. Could you change this to: 
CONFIG_USB_GADGET_PRODUCT_NUM=0x6164

for J7200?

Applies to r5 defconfig too..



Regards
Vignesh