From: Vignesh Raghavendra <vigneshr@ti.com> To: Tero Kristo <t-kristo@ti.com>, Nishanth Menon <nm@ti.com> Cc: Rob Herring <robh+dt@kernel.org>, <linux-arm-kernel@lists.infradead.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, Vignesh Raghavendra <vigneshr@ti.com> Subject: [PATCH 1/2] arm64: dts: ti: j7200: Add I2C nodes Date: Fri, 31 Jul 2020 00:55:59 +0530 [thread overview] Message-ID: <20200730192600.1872-2-vigneshr@ti.com> (raw) In-Reply-To: <20200730192600.1872-1-vigneshr@ti.com> J7200 has 7 I2Cs main domain, 2 I2Cs in MCU and one in wakeup domain. Add DT nodes of the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> --- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 77 +++++++++++++++++++ .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 33 ++++++++ 2 files changed, 110 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index 70c8f7e941fbf..0a87fa3ea5f0c 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -196,4 +196,81 @@ main_uart9: serial@2890000 { clocks = <&k3_clks 286 2>; clock-names = "fclk"; }; + + main_i2c0: i2c@2000000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2000000 0x0 0x100>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 187 1>; + power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>; + }; + + main_i2c1: i2c@2010000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2010000 0x0 0x100>; + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 188 1>; + power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c2: i2c@2020000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2020000 0x0 0x100>; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 189 1>; + power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c3: i2c@2030000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2030000 0x0 0x100>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 190 1>; + power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c4: i2c@2040000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2040000 0x0 0x100>; + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 191 1>; + power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c5: i2c@2050000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2050000 0x0 0x100>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 192 1>; + power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c6: i2c@2060000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2060000 0x0 0x100>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 193 1>; + power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index 670e4c7cd9fed..94a797bbcdaf0 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -81,4 +81,37 @@ mcu_uart0: serial@40a00000 { clocks = <&k3_clks 149 2>; clock-names = "fclk"; }; + + mcu_i2c0: i2c@40b00000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x40b00000 0x0 0x100>; + interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 194 1>; + power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>; + }; + + mcu_i2c1: i2c@40b10000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x40b10000 0x0 0x100>; + interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 195 1>; + power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>; + }; + + wkup_i2c0: i2c@42120000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x42120000 0x0 0x100>; + interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 197 1>; + power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>; + }; }; -- 2.28.0
WARNING: multiple messages have this Message-ID (diff)
From: Vignesh Raghavendra <vigneshr@ti.com> To: Tero Kristo <t-kristo@ti.com>, Nishanth Menon <nm@ti.com> Cc: devicetree@vger.kernel.org, Rob Herring <robh+dt@kernel.org>, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Vignesh Raghavendra <vigneshr@ti.com> Subject: [PATCH 1/2] arm64: dts: ti: j7200: Add I2C nodes Date: Fri, 31 Jul 2020 00:55:59 +0530 [thread overview] Message-ID: <20200730192600.1872-2-vigneshr@ti.com> (raw) In-Reply-To: <20200730192600.1872-1-vigneshr@ti.com> J7200 has 7 I2Cs main domain, 2 I2Cs in MCU and one in wakeup domain. Add DT nodes of the same. Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> --- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 77 +++++++++++++++++++ .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 33 ++++++++ 2 files changed, 110 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index 70c8f7e941fbf..0a87fa3ea5f0c 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -196,4 +196,81 @@ main_uart9: serial@2890000 { clocks = <&k3_clks 286 2>; clock-names = "fclk"; }; + + main_i2c0: i2c@2000000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2000000 0x0 0x100>; + interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 187 1>; + power-domains = <&k3_pds 187 TI_SCI_PD_SHARED>; + }; + + main_i2c1: i2c@2010000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2010000 0x0 0x100>; + interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 188 1>; + power-domains = <&k3_pds 188 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c2: i2c@2020000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2020000 0x0 0x100>; + interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 189 1>; + power-domains = <&k3_pds 189 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c3: i2c@2030000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2030000 0x0 0x100>; + interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 190 1>; + power-domains = <&k3_pds 190 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c4: i2c@2040000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2040000 0x0 0x100>; + interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 191 1>; + power-domains = <&k3_pds 191 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c5: i2c@2050000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2050000 0x0 0x100>; + interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 192 1>; + power-domains = <&k3_pds 192 TI_SCI_PD_EXCLUSIVE>; + }; + + main_i2c6: i2c@2060000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x2060000 0x0 0x100>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 193 1>; + power-domains = <&k3_pds 193 TI_SCI_PD_EXCLUSIVE>; + }; }; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index 670e4c7cd9fed..94a797bbcdaf0 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -81,4 +81,37 @@ mcu_uart0: serial@40a00000 { clocks = <&k3_clks 149 2>; clock-names = "fclk"; }; + + mcu_i2c0: i2c@40b00000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x40b00000 0x0 0x100>; + interrupts = <GIC_SPI 852 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 194 1>; + power-domains = <&k3_pds 194 TI_SCI_PD_EXCLUSIVE>; + }; + + mcu_i2c1: i2c@40b10000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x40b10000 0x0 0x100>; + interrupts = <GIC_SPI 853 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 195 1>; + power-domains = <&k3_pds 195 TI_SCI_PD_EXCLUSIVE>; + }; + + wkup_i2c0: i2c@42120000 { + compatible = "ti,j721e-i2c", "ti,omap4-i2c"; + reg = <0x0 0x42120000 0x0 0x100>; + interrupts = <GIC_SPI 896 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "fck"; + clocks = <&k3_clks 197 1>; + power-domains = <&k3_pds 197 TI_SCI_PD_SHARED>; + }; }; -- 2.28.0 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-07-30 19:26 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-07-30 19:25 [PATCH 0/2] J7200: Add I2C support Vignesh Raghavendra 2020-07-30 19:25 ` Vignesh Raghavendra 2020-07-30 19:25 ` Vignesh Raghavendra [this message] 2020-07-30 19:25 ` [PATCH 1/2] arm64: dts: ti: j7200: Add I2C nodes Vignesh Raghavendra 2020-07-30 19:26 ` [PATCH 2/2] arm64: dts: ti: k3-j7200-common-proc-board: Add I2C IO expanders Vignesh Raghavendra 2020-07-30 19:26 ` Vignesh Raghavendra
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200730192600.1872-2-vigneshr@ti.com \ --to=vigneshr@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=robh+dt@kernel.org \ --cc=t-kristo@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.