[PATCH v1 0/3] Verify measurement of certificate imported into a keyring

[PATCH v1 0/3] Verify measurement of certificate imported into a keyring

[Lachlan Sneff]

The IMA subsystem supports measuring certificates that have been loaded into
user-defined keyrings and system built-in keyrings. A test to verify that
those measurements are correct is required.

The first two patches in this patchset fix up left-over documentation and
move some datafiles around to prepare for more datafiles in the 3rd patch.

The third patch adds a new test to the `ima_keys.sh` file, which imports
a certificate into a user-defined keyring, and then verifies that the
certificate has been measured correctly by the IMA subsystem.

Lachlan Sneff (3):
  IMA: Update key test documentation
  IMA: Refactor datafiles directory
  IMA: Add a test to verify measurement of certificate imported into a
    keyring

 .../kernel/security/integrity/ima/README.md   |  32 +++++++------
 .../security/integrity/ima/datafiles/Makefile |   6 +--
 .../integrity/ima/datafiles/keys/Makefile     |  15 ++++++
 .../integrity/ima/datafiles/keys/x509_ima.der | Bin 0 -> 650 bytes
 .../integrity/ima/datafiles/policy/Makefile   |  15 ++++++
 .../ima/datafiles/{ => policy}/kexec.policy   |   0
 .../datafiles/{ => policy}/keycheck.policy    |   0
 .../ima/datafiles/{ => policy}/measure.policy |   0
 .../{ => policy}/measure.policy-invalid       |   0
 .../security/integrity/ima/tests/ima_keys.sh  |  44 +++++++++++++++++-
 10 files changed, 91 insertions(+), 21 deletions(-)
 create mode 100644 testcases/kernel/security/integrity/ima/datafiles/keys/Makefile
 create mode 100644 testcases/kernel/security/integrity/ima/datafiles/keys/x509_ima.der
 create mode 100644 testcases/kernel/security/integrity/ima/datafiles/policy/Makefile
 rename testcases/kernel/security/integrity/ima/datafiles/{ => policy}/kexec.policy (100%)
 rename testcases/kernel/security/integrity/ima/datafiles/{ => policy}/keycheck.policy (100%)
 rename testcases/kernel/security/integrity/ima/datafiles/{ => policy}/measure.policy (100%)
 rename testcases/kernel/security/integrity/ima/datafiles/{ => policy}/measure.policy-invalid (100%)

-- 
2.25.1

[LTP] [PATCH v1 0/3] Verify measurement of certificate imported into a keyring

[Lachlan Sneff]

The IMA subsystem supports measuring certificates that have been loaded into
user-defined keyrings and system built-in keyrings. A test to verify that
those measurements are correct is required.

The first two patches in this patchset fix up left-over documentation and
move some datafiles around to prepare for more datafiles in the 3rd patch.

The third patch adds a new test to the `ima_keys.sh` file, which imports
a certificate into a user-defined keyring, and then verifies that the
certificate has been measured correctly by the IMA subsystem.

Lachlan Sneff (3):
  IMA: Update key test documentation
  IMA: Refactor datafiles directory
  IMA: Add a test to verify measurement of certificate imported into a
    keyring

 .../kernel/security/integrity/ima/README.md   |  32 +++++++------
 .../security/integrity/ima/datafiles/Makefile |   6 +--
 .../integrity/ima/datafiles/keys/Makefile     |  15 ++++++
 .../integrity/ima/datafiles/keys/x509_ima.der | Bin 0 -> 650 bytes
 .../integrity/ima/datafiles/policy/Makefile   |  15 ++++++
 .../ima/datafiles/{ => policy}/kexec.policy   |   0
 .../datafiles/{ => policy}/keycheck.policy    |   0
 .../ima/datafiles/{ => policy}/measure.policy |   0
 .../{ => policy}/measure.policy-invalid       |   0
 .../security/integrity/ima/tests/ima_keys.sh  |  44 +++++++++++++++++-
 10 files changed, 91 insertions(+), 21 deletions(-)
 create mode 100644 testcases/kernel/security/integrity/ima/datafiles/keys/Makefile
 create mode 100644 testcases/kernel/security/integrity/ima/datafiles/keys/x509_ima.der
 create mode 100644 testcases/kernel/security/integrity/ima/datafiles/policy/Makefile
 rename testcases/kernel/security/integrity/ima/datafiles/{ => policy}/kexec.policy (100%)
 rename testcases/kernel/security/integrity/ima/datafiles/{ => policy}/keycheck.policy (100%)
 rename testcases/kernel/security/integrity/ima/datafiles/{ => policy}/measure.policy (100%)
 rename testcases/kernel/security/integrity/ima/datafiles/{ => policy}/measure.policy-invalid (100%)

-- 
2.25.1

[PATCH 1/3] IMA: Update key test documentation

[Lachlan Sneff]

The current documentation for the existing IMA key test was
left in by accident by a previous merge. It does not apply
to the test that is currently included in the LTP.

Update the documentation for the IMA key test.

Signed-off-by: Lachlan Sneff <t-josne@linux.microsoft.com>
---
 .../kernel/security/integrity/ima/README.md   | 22 +++++--------------
 1 file changed, 5 insertions(+), 17 deletions(-)

diff --git a/testcases/kernel/security/integrity/ima/README.md b/testcases/kernel/security/integrity/ima/README.md
index d4644ba39..2956ac7fd 100644
--- a/testcases/kernel/security/integrity/ima/README.md
+++ b/testcases/kernel/security/integrity/ima/README.md
@@ -15,27 +15,15 @@ Although a custom policy, loaded via dracut, systemd or manually from user
 space, may contain equivalent measurement tcb rules, detecting them would
 require `IMA_READ_POLICY=y` therefore ignore this option.
 
-### IMA key import test
-`ima_keys.sh` requires a x509 public key, by default in `/etc/keys/x509_ima.der`
-(defined in `CONFIG_IMA_X509_PATH` kernel config option).
-The key must be signed by the private key you generate. Follow these instructions:
-https://manpages.ubuntu.com/manpages/disco/man1/evmctl.1.html#generate%20trusted%20keys
-
-The test cannot be set-up automatically because the x509 public key must be
-built into the kernel and loaded onto a trusted keyring
-(e.g. `.builtin_trusted_keys`, `.secondary_trusted_keyring`).
-
-As well as what's required for the IMA tests, the following are also required
-in the kernel configuration:
+### IMA key test
+`ima_keys.sh` requires a readable IMA policy, as well as a loaded policy
+with `func=KEY_CHECK keyrings=...`, see example in `keycheck.policy`.
+
+Mandatory kernel configuration for IMA:
 ```
 CONFIG_IMA_READ_POLICY=y
-CONFIG_IMA_X509_PATH="/etc/keys/x509_ima.der"
-CONFIG_SYSTEM_TRUSTED_KEYRING=y
-CONFIG_SYSTEM_TRUSTED_KEYS="/etc/keys/ima-local-ca.pem"
 ```
 
-Test also requires loaded policy with `func=KEY_CHECK`, see example in `keycheck.policy`.
-
 ### IMA kexec test
 
 `ima_kexec.sh` requires loaded policy which contains `measure func=KEXEC_CMDLINE`,
-- 
2.25.1

[LTP] [PATCH 1/3] IMA: Update key test documentation

[Lachlan Sneff]

The current documentation for the existing IMA key test was
left in by accident by a previous merge. It does not apply
to the test that is currently included in the LTP.

Update the documentation for the IMA key test.

Signed-off-by: Lachlan Sneff <t-josne@linux.microsoft.com>
---
 .../kernel/security/integrity/ima/README.md   | 22 +++++--------------
 1 file changed, 5 insertions(+), 17 deletions(-)

diff --git a/testcases/kernel/security/integrity/ima/README.md b/testcases/kernel/security/integrity/ima/README.md
index d4644ba39..2956ac7fd 100644
--- a/testcases/kernel/security/integrity/ima/README.md
+++ b/testcases/kernel/security/integrity/ima/README.md
@@ -15,27 +15,15 @@ Although a custom policy, loaded via dracut, systemd or manually from user
 space, may contain equivalent measurement tcb rules, detecting them would
 require `IMA_READ_POLICY=y` therefore ignore this option.
 
-### IMA key import test
-`ima_keys.sh` requires a x509 public key, by default in `/etc/keys/x509_ima.der`
-(defined in `CONFIG_IMA_X509_PATH` kernel config option).
-The key must be signed by the private key you generate. Follow these instructions:
-https://manpages.ubuntu.com/manpages/disco/man1/evmctl.1.html#generate%20trusted%20keys
-
-The test cannot be set-up automatically because the x509 public key must be
-built into the kernel and loaded onto a trusted keyring
-(e.g. `.builtin_trusted_keys`, `.secondary_trusted_keyring`).
-
-As well as what's required for the IMA tests, the following are also required
-in the kernel configuration:
+### IMA key test
+`ima_keys.sh` requires a readable IMA policy, as well as a loaded policy
+with `func=KEY_CHECK keyrings=...`, see example in `keycheck.policy`.
+
+Mandatory kernel configuration for IMA:
 ```
 CONFIG_IMA_READ_POLICY=y
-CONFIG_IMA_X509_PATH="/etc/keys/x509_ima.der"
-CONFIG_SYSTEM_TRUSTED_KEYRING=y
-CONFIG_SYSTEM_TRUSTED_KEYS="/etc/keys/ima-local-ca.pem"
 ```
 
-Test also requires loaded policy with `func=KEY_CHECK`, see example in `keycheck.policy`.
-
 ### IMA kexec test
 
 `ima_kexec.sh` requires loaded policy which contains `measure func=KEXEC_CMDLINE`,
-- 
2.25.1

[PATCH 2/3] IMA: Refactor datafiles directory

[Lachlan Sneff]

The IMA datafiles directory is structured so that it cannot be directly
expanded to include datafiles for tests other than `ima_policy.sh`.

Move the contents of the IMA datafiles directory into an IMA
datafiles/policy directory.

Signed-off-by: Lachlan Sneff <t-josne@linux.microsoft.com>
---
 .../security/integrity/ima/datafiles/Makefile     |  6 ++----
 .../integrity/ima/datafiles/policy/Makefile       | 15 +++++++++++++++
 .../ima/datafiles/{ => policy}/kexec.policy       |  0
 .../ima/datafiles/{ => policy}/keycheck.policy    |  0
 .../ima/datafiles/{ => policy}/measure.policy     |  0
 .../datafiles/{ => policy}/measure.policy-invalid |  0
 6 files changed, 17 insertions(+), 4 deletions(-)
 create mode 100644 testcases/kernel/security/integrity/ima/datafiles/policy/Makefile
 rename testcases/kernel/security/integrity/ima/datafiles/{ => policy}/kexec.policy (100%)
 rename testcases/kernel/security/integrity/ima/datafiles/{ => policy}/keycheck.policy (100%)
 rename testcases/kernel/security/integrity/ima/datafiles/{ => policy}/measure.policy (100%)
 rename testcases/kernel/security/integrity/ima/datafiles/{ => policy}/measure.policy-invalid (100%)

diff --git a/testcases/kernel/security/integrity/ima/datafiles/Makefile b/testcases/kernel/security/integrity/ima/datafiles/Makefile
index 369407112..3772e9a03 100644
--- a/testcases/kernel/security/integrity/ima/datafiles/Makefile
+++ b/testcases/kernel/security/integrity/ima/datafiles/Makefile
@@ -24,8 +24,6 @@ top_srcdir		?= ../../../../../..
 
 include	$(top_srcdir)/include/mk/env_pre.mk
 
-INSTALL_DIR		:= testcases/data/ima_policy
+SUBDIRS			:= policy
 
-INSTALL_TARGETS		:= measure.policy-invalid *.policy
-
-include $(top_srcdir)/include/mk/generic_leaf_target.mk
+include $(top_srcdir)/include/mk/generic_trunk_target.mk
diff --git a/testcases/kernel/security/integrity/ima/datafiles/policy/Makefile b/testcases/kernel/security/integrity/ima/datafiles/policy/Makefile
new file mode 100644
index 000000000..84d1424c6
--- /dev/null
+++ b/testcases/kernel/security/integrity/ima/datafiles/policy/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2020 Microsoft Corporation
+# Author: Lachlan Sneff <t-josne@linux.microsoft.com>
+#
+# IMA datafiles/policy Makefile
+
+top_srcdir		?= ../../../../../../..
+
+include	$(top_srcdir)/include/mk/env_pre.mk
+
+INSTALL_DIR		:= testcases/data/ima_policy
+
+INSTALL_TARGETS		:= measure.policy-invalid *.policy
+
+include $(top_srcdir)/include/mk/generic_leaf_target.mk
\ No newline at end of file
diff --git a/testcases/kernel/security/integrity/ima/datafiles/kexec.policy b/testcases/kernel/security/integrity/ima/datafiles/policy/kexec.policy
similarity index 100%
rename from testcases/kernel/security/integrity/ima/datafiles/kexec.policy
rename to testcases/kernel/security/integrity/ima/datafiles/policy/kexec.policy
diff --git a/testcases/kernel/security/integrity/ima/datafiles/keycheck.policy b/testcases/kernel/security/integrity/ima/datafiles/policy/keycheck.policy
similarity index 100%
rename from testcases/kernel/security/integrity/ima/datafiles/keycheck.policy
rename to testcases/kernel/security/integrity/ima/datafiles/policy/keycheck.policy
diff --git a/testcases/kernel/security/integrity/ima/datafiles/measure.policy b/testcases/kernel/security/integrity/ima/datafiles/policy/measure.policy
similarity index 100%
rename from testcases/kernel/security/integrity/ima/datafiles/measure.policy
rename to testcases/kernel/security/integrity/ima/datafiles/policy/measure.policy
diff --git a/testcases/kernel/security/integrity/ima/datafiles/measure.policy-invalid b/testcases/kernel/security/integrity/ima/datafiles/policy/measure.policy-invalid
similarity index 100%
rename from testcases/kernel/security/integrity/ima/datafiles/measure.policy-invalid
rename to testcases/kernel/security/integrity/ima/datafiles/policy/measure.policy-invalid
-- 
2.25.1

[LTP] [PATCH 2/3] IMA: Refactor datafiles directory

[Lachlan Sneff]

The IMA datafiles directory is structured so that it cannot be directly
expanded to include datafiles for tests other than `ima_policy.sh`.

Move the contents of the IMA datafiles directory into an IMA
datafiles/policy directory.

Signed-off-by: Lachlan Sneff <t-josne@linux.microsoft.com>
---
 .../security/integrity/ima/datafiles/Makefile     |  6 ++----
 .../integrity/ima/datafiles/policy/Makefile       | 15 +++++++++++++++
 .../ima/datafiles/{ => policy}/kexec.policy       |  0
 .../ima/datafiles/{ => policy}/keycheck.policy    |  0
 .../ima/datafiles/{ => policy}/measure.policy     |  0
 .../datafiles/{ => policy}/measure.policy-invalid |  0
 6 files changed, 17 insertions(+), 4 deletions(-)
 create mode 100644 testcases/kernel/security/integrity/ima/datafiles/policy/Makefile
 rename testcases/kernel/security/integrity/ima/datafiles/{ => policy}/kexec.policy (100%)
 rename testcases/kernel/security/integrity/ima/datafiles/{ => policy}/keycheck.policy (100%)
 rename testcases/kernel/security/integrity/ima/datafiles/{ => policy}/measure.policy (100%)
 rename testcases/kernel/security/integrity/ima/datafiles/{ => policy}/measure.policy-invalid (100%)

diff --git a/testcases/kernel/security/integrity/ima/datafiles/Makefile b/testcases/kernel/security/integrity/ima/datafiles/Makefile
index 369407112..3772e9a03 100644
--- a/testcases/kernel/security/integrity/ima/datafiles/Makefile
+++ b/testcases/kernel/security/integrity/ima/datafiles/Makefile
@@ -24,8 +24,6 @@ top_srcdir		?= ../../../../../..
 
 include	$(top_srcdir)/include/mk/env_pre.mk
 
-INSTALL_DIR		:= testcases/data/ima_policy
+SUBDIRS			:= policy
 
-INSTALL_TARGETS		:= measure.policy-invalid *.policy
-
-include $(top_srcdir)/include/mk/generic_leaf_target.mk
+include $(top_srcdir)/include/mk/generic_trunk_target.mk
diff --git a/testcases/kernel/security/integrity/ima/datafiles/policy/Makefile b/testcases/kernel/security/integrity/ima/datafiles/policy/Makefile
new file mode 100644
index 000000000..84d1424c6
--- /dev/null
+++ b/testcases/kernel/security/integrity/ima/datafiles/policy/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2020 Microsoft Corporation
+# Author: Lachlan Sneff <t-josne@linux.microsoft.com>
+#
+# IMA datafiles/policy Makefile
+
+top_srcdir		?= ../../../../../../..
+
+include	$(top_srcdir)/include/mk/env_pre.mk
+
+INSTALL_DIR		:= testcases/data/ima_policy
+
+INSTALL_TARGETS		:= measure.policy-invalid *.policy
+
+include $(top_srcdir)/include/mk/generic_leaf_target.mk
\ No newline at end of file
diff --git a/testcases/kernel/security/integrity/ima/datafiles/kexec.policy b/testcases/kernel/security/integrity/ima/datafiles/policy/kexec.policy
similarity index 100%
rename from testcases/kernel/security/integrity/ima/datafiles/kexec.policy
rename to testcases/kernel/security/integrity/ima/datafiles/policy/kexec.policy
diff --git a/testcases/kernel/security/integrity/ima/datafiles/keycheck.policy b/testcases/kernel/security/integrity/ima/datafiles/policy/keycheck.policy
similarity index 100%
rename from testcases/kernel/security/integrity/ima/datafiles/keycheck.policy
rename to testcases/kernel/security/integrity/ima/datafiles/policy/keycheck.policy
diff --git a/testcases/kernel/security/integrity/ima/datafiles/measure.policy b/testcases/kernel/security/integrity/ima/datafiles/policy/measure.policy
similarity index 100%
rename from testcases/kernel/security/integrity/ima/datafiles/measure.policy
rename to testcases/kernel/security/integrity/ima/datafiles/policy/measure.policy
diff --git a/testcases/kernel/security/integrity/ima/datafiles/measure.policy-invalid b/testcases/kernel/security/integrity/ima/datafiles/policy/measure.policy-invalid
similarity index 100%
rename from testcases/kernel/security/integrity/ima/datafiles/measure.policy-invalid
rename to testcases/kernel/security/integrity/ima/datafiles/policy/measure.policy-invalid
-- 
2.25.1

[PATCH 3/3] IMA: Add a test to verify measurement of certificate imported into a keyring

[Lachlan Sneff]

The IMA subsystem supports measuring certificates that have been
imported into either system built-in or user-defined keyrings.
A test to verify measurement of a certificate imported
into a keyring is required.

Add an IMA measurement test that verifies that an x509 certificate
can be imported into a newly-created, user-defined keyring and measured
correctly by the IMA subsystem.

A certificate used by the test is included in the `datafiles/keys`
directory.

There can be restrictions on importing a certificate into a builtin
trusted keyring. For example, the `.ima` keyring requires that
imported certs be signed by a kernel private key in certain
kernel configurations. For this reason, this test defines
a user-defined keyring and imports a certificate into that.

Signed-off-by: Lachlan Sneff <t-josne@linux.microsoft.com>
---
 .../kernel/security/integrity/ima/README.md   |  14 ++++++
 .../security/integrity/ima/datafiles/Makefile |   2 +-
 .../integrity/ima/datafiles/keys/Makefile     |  15 ++++++
 .../integrity/ima/datafiles/keys/x509_ima.der | Bin 0 -> 650 bytes
 .../security/integrity/ima/tests/ima_keys.sh  |  44 +++++++++++++++++-
 5 files changed, 72 insertions(+), 3 deletions(-)
 create mode 100644 testcases/kernel/security/integrity/ima/datafiles/keys/Makefile
 create mode 100644 testcases/kernel/security/integrity/ima/datafiles/keys/x509_ima.der

diff --git a/testcases/kernel/security/integrity/ima/README.md b/testcases/kernel/security/integrity/ima/README.md
index 2956ac7fd..bfa015191 100644
--- a/testcases/kernel/security/integrity/ima/README.md
+++ b/testcases/kernel/security/integrity/ima/README.md
@@ -23,6 +23,20 @@ Mandatory kernel configuration for IMA:
 ```
 CONFIG_IMA_READ_POLICY=y
 ```
+The certificate import test in `ima_keys.sh` also requires that
+the `key_import_test` keyring is specified in the IMA policy.
+
+One way to do this is to modify an existing KEY_CHECK entry
+in the IMA policy by adding `key_import_test` for keyrings:
+```
+measure func=KEY_CHECK keyrings=.ima|.evm|key_import_test template=ima-buf
+```
+
+If KEY_CHECK entry does not exist in the IMA policy then by adding
+the following line:
+```
+measure func=KEY_CHECK keyrings=key_import_test template=ima-buf
+```
 
 ### IMA kexec test
 
diff --git a/testcases/kernel/security/integrity/ima/datafiles/Makefile b/testcases/kernel/security/integrity/ima/datafiles/Makefile
index 3772e9a03..4b4c46b82 100644
--- a/testcases/kernel/security/integrity/ima/datafiles/Makefile
+++ b/testcases/kernel/security/integrity/ima/datafiles/Makefile
@@ -24,6 +24,6 @@ top_srcdir		?= ../../../../../..
 
 include	$(top_srcdir)/include/mk/env_pre.mk
 
-SUBDIRS			:= policy
+SUBDIRS			:= policy keys
 
 include $(top_srcdir)/include/mk/generic_trunk_target.mk
diff --git a/testcases/kernel/security/integrity/ima/datafiles/keys/Makefile b/testcases/kernel/security/integrity/ima/datafiles/keys/Makefile
new file mode 100644
index 000000000..a8ab7a1b5
--- /dev/null
+++ b/testcases/kernel/security/integrity/ima/datafiles/keys/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2020 Microsoft Corporation
+# Author: Lachlan Sneff <t-josne@linux.microsoft.com>
+#
+# IMA datafiles/keys Makefile
+
+top_srcdir		?= ../../../../../../..
+
+include	$(top_srcdir)/include/mk/env_pre.mk
+
+INSTALL_DIR		:= testcases/data/ima_keys
+
+INSTALL_TARGETS		:= x509_ima.der
+
+include $(top_srcdir)/include/mk/generic_leaf_target.mk
diff --git a/testcases/kernel/security/integrity/ima/datafiles/keys/x509_ima.der b/testcases/kernel/security/integrity/ima/datafiles/keys/x509_ima.der
new file mode 100644
index 0000000000000000000000000000000000000000..92be058da22adffa9d6b6e51efa0c737ebbbbdcd
GIT binary patch
literal 650
zcmXqLVrnyJVtl`VnTe5!NhJD#vj69`9|BBf8}FEsx@^_9$Clp>c-c6$+C196^D;7W
zvoaV27z!HjvoVLVaPe?t<QJFZCFZ6YN*hRmgqV4R$}{p4b2Al+Gt=`j^U@WvQ!5SS
z3}oO&a59SVLzFncG#ki?^BP(jSQr@@7#Ud_7)6Qm8W{k&hEOgIY;2s5>?=lA2Ij_I
z27|^<rp88wchfeduxmMW^j9qUxkIugeev4q7u7yrJR_rW$*!>VOo=tim8DK0r^FsU
zl)K`}`+CO4@4KBkoLmcj?fH`%wbDvU<d=4Z>6-SMf6Eh}{&)1rdsOoNQ-1fgBQ1t{
zVTqGwuK95LlFE)6i{@=vlP6!2`Y}x<BF&oXU_nlDxy@C+CNp&=W=00a#jys_20XwZ
zl@(@W{LjK<z+k`);_<VvFf*|?7|4P+d@N!tBCNWX-0#?!UAx9s`mgFmW+nI2#6kmk
zkhC(3gn?Lt$m4W@56wQ)?QVKW<nOtpT)HJrB?Q^`z&K?FdV8b(y8m)~mOOvswu^9m
z-o7mOwCAzaT*~`Y4wxFtmNA_89`W;j{r#iww*5OC5vgEziqD_%=ki$*`;s}`Pfwi{
zbotZ0X`ckHOmaVLm85n@E9hN_K;~PUB>DFAzh(;(UoMln9V>g;W#-LUGS7A`nYQKY
WBem{7L5JThS+;$vggi%(*E;~nlJ80Y

literal 0
HcmV?d00001

diff --git a/testcases/kernel/security/integrity/ima/tests/ima_keys.sh b/testcases/kernel/security/integrity/ima/tests/ima_keys.sh
index 3aea26056..f34f40132 100755
--- a/testcases/kernel/security/integrity/ima/tests/ima_keys.sh
+++ b/testcases/kernel/security/integrity/ima/tests/ima_keys.sh
@@ -6,9 +6,10 @@
 #
 # Verify that keys are measured correctly based on policy.
 
-TST_NEEDS_CMDS="cut grep sed tr xxd"
-TST_CNT=1
+TST_NEEDS_CMDS="grep cut sed tr xxd evmctl openssl keyctl"
+TST_CNT=2
 TST_NEEDS_DEVICE=1
+TST_NEEDS_ROOT=1
 
 . ima_setup.sh
 
@@ -58,4 +59,43 @@ test1()
 	tst_res TPASS "specified keyrings were measured correctly"
 }
 
+# Create a new keyring, import a certificate into it, and verify
+# that the certificate is measured correctly by IMA.
+test2() {
+	local new_keyring_id temp_file="file.txt" \
+		cert_file="$TST_DATAROOT/x509_ima.der"
+
+	if ! check_ima_policy_content '^measure.*func=KEY_CHECK.*keyrings=.*key_import_test'; then
+		tst_brk TCONF "the IMA policy does not include the key_import_test keyring. See the LTP IMA README."
+	fi
+
+	# Assuming this test is executed in a separate shell,
+	# create a new session that will be cleaned up when
+	# the shell exits.
+	keyctl new_session > /dev/null
+
+	new_keyring_id=$(keyctl newring key_import_test @s) || \
+		tst_brk TCONF "unable to create a new keyring"
+
+	tst_is_num "$new_keyring_id" || \
+		tst_brk TCONF "unable to parse the new keyring id"
+
+	evmctl import "$cert_file" "$new_keyring_id" > /dev/null || \
+		tst_brk TCONF "unable to import a cert into a the key_import_test keyring"
+
+	grep "key_import_test" "$ASCII_MEASUREMENTS" | tail -n1 | cut -d' ' -f6 | \
+		xxd -r -p > "$temp_file" || \
+		tst_brk TCONF "keyring not found in $ASCII_MEASUREMENTS"
+
+	if ! openssl x509 -in "$temp_file" -inform der > /dev/null; then
+		tst_brk TCONF "the cert logged in $ASCII_MEASUREMENTS is not a valid x509 certificate"
+	fi
+
+	if cmp -s "$temp_file" "$cert_file"; then
+		tst_res TPASS "logged cert matches original cert"
+	else
+		tst_res TFAIL "logged cert does not match original cert"
+	fi
+}
+
 tst_run
-- 
2.25.1

[LTP] [PATCH 3/3] IMA: Add a test to verify measurement of certificate imported into a keyring

[Lachlan Sneff]

The IMA subsystem supports measuring certificates that have been
imported into either system built-in or user-defined keyrings.
A test to verify measurement of a certificate imported
into a keyring is required.

Add an IMA measurement test that verifies that an x509 certificate
can be imported into a newly-created, user-defined keyring and measured
correctly by the IMA subsystem.

A certificate used by the test is included in the `datafiles/keys`
directory.

There can be restrictions on importing a certificate into a builtin
trusted keyring. For example, the `.ima` keyring requires that
imported certs be signed by a kernel private key in certain
kernel configurations. For this reason, this test defines
a user-defined keyring and imports a certificate into that.

Signed-off-by: Lachlan Sneff <t-josne@linux.microsoft.com>
---
 .../kernel/security/integrity/ima/README.md   |  14 ++++++
 .../security/integrity/ima/datafiles/Makefile |   2 +-
 .../integrity/ima/datafiles/keys/Makefile     |  15 ++++++
 .../integrity/ima/datafiles/keys/x509_ima.der | Bin 0 -> 650 bytes
 .../security/integrity/ima/tests/ima_keys.sh  |  44 +++++++++++++++++-
 5 files changed, 72 insertions(+), 3 deletions(-)
 create mode 100644 testcases/kernel/security/integrity/ima/datafiles/keys/Makefile
 create mode 100644 testcases/kernel/security/integrity/ima/datafiles/keys/x509_ima.der

diff --git a/testcases/kernel/security/integrity/ima/README.md b/testcases/kernel/security/integrity/ima/README.md
index 2956ac7fd..bfa015191 100644
--- a/testcases/kernel/security/integrity/ima/README.md
+++ b/testcases/kernel/security/integrity/ima/README.md
@@ -23,6 +23,20 @@ Mandatory kernel configuration for IMA:
 ```
 CONFIG_IMA_READ_POLICY=y
 ```
+The certificate import test in `ima_keys.sh` also requires that
+the `key_import_test` keyring is specified in the IMA policy.
+
+One way to do this is to modify an existing KEY_CHECK entry
+in the IMA policy by adding `key_import_test` for keyrings:
+```
+measure func=KEY_CHECK keyrings=.ima|.evm|key_import_test template=ima-buf
+```
+
+If KEY_CHECK entry does not exist in the IMA policy then by adding
+the following line:
+```
+measure func=KEY_CHECK keyrings=key_import_test template=ima-buf
+```
 
 ### IMA kexec test
 
diff --git a/testcases/kernel/security/integrity/ima/datafiles/Makefile b/testcases/kernel/security/integrity/ima/datafiles/Makefile
index 3772e9a03..4b4c46b82 100644
--- a/testcases/kernel/security/integrity/ima/datafiles/Makefile
+++ b/testcases/kernel/security/integrity/ima/datafiles/Makefile
@@ -24,6 +24,6 @@ top_srcdir		?= ../../../../../..
 
 include	$(top_srcdir)/include/mk/env_pre.mk
 
-SUBDIRS			:= policy
+SUBDIRS			:= policy keys
 
 include $(top_srcdir)/include/mk/generic_trunk_target.mk
diff --git a/testcases/kernel/security/integrity/ima/datafiles/keys/Makefile b/testcases/kernel/security/integrity/ima/datafiles/keys/Makefile
new file mode 100644
index 000000000..a8ab7a1b5
--- /dev/null
+++ b/testcases/kernel/security/integrity/ima/datafiles/keys/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2020 Microsoft Corporation
+# Author: Lachlan Sneff <t-josne@linux.microsoft.com>
+#
+# IMA datafiles/keys Makefile
+
+top_srcdir		?= ../../../../../../..
+
+include	$(top_srcdir)/include/mk/env_pre.mk
+
+INSTALL_DIR		:= testcases/data/ima_keys
+
+INSTALL_TARGETS		:= x509_ima.der
+
+include $(top_srcdir)/include/mk/generic_leaf_target.mk
diff --git a/testcases/kernel/security/integrity/ima/datafiles/keys/x509_ima.der b/testcases/kernel/security/integrity/ima/datafiles/keys/x509_ima.der
new file mode 100644
index 0000000000000000000000000000000000000000..92be058da22adffa9d6b6e51efa0c737ebbbbdcd
GIT binary patch
literal 650
zcmXqLVrnyJVtl`VnTe5!NhJD#vj69`9|BBf8}FEsx@^_9$Clp>c-c6$+C196^D;7W
zvoaV27z!HjvoVLVaPe?t<QJFZCFZ6YN*hRmgqV4R$}{p4b2Al+Gt=`j^U@WvQ!5SS
z3}oO&a59SVLzFncG#ki?^BP(jSQr@@7#Ud_7)6Qm8W{k&hEOgIY;2s5>?=lA2Ij_I
z27|^<rp88wchfeduxmMW^j9qUxkIugeev4q7u7yrJR_rW$*!>VOo=tim8DK0r^FsU
zl)K`}`+CO4@4KBkoLmcj?fH`%wbDvU<d=4Z>6-SMf6Eh}{&)1rdsOoNQ-1fgBQ1t{
zVTqGwuK95LlFE)6i{@=vlP6!2`Y}x<BF&oXU_nlDxy@C+CNp&=W=00a#jys_20XwZ
zl@(@W{LjK<z+k`);_<VvFf*|?7|4P+d@N!tBCNWX-0#?!UAx9s`mgFmW+nI2#6kmk
zkhC(3gn?Lt$m4W@56wQ)?QVKW<nOtpT)HJrB?Q^`z&K?FdV8b(y8m)~mOOvswu^9m
z-o7mOwCAzaT*~`Y4wxFtmNA_89`W;j{r#iww*5OC5vgEziqD_%=ki$*`;s}`Pfwi{
zbotZ0X`ckHOmaVLm85n@E9hN_K;~PUB>DFAzh(;(UoMln9V>g;W#-LUGS7A`nYQKY
WBem{7L5JThS+;$vggi%(*E;~nlJ80Y

literal 0
HcmV?d00001

diff --git a/testcases/kernel/security/integrity/ima/tests/ima_keys.sh b/testcases/kernel/security/integrity/ima/tests/ima_keys.sh
index 3aea26056..f34f40132 100755
--- a/testcases/kernel/security/integrity/ima/tests/ima_keys.sh
+++ b/testcases/kernel/security/integrity/ima/tests/ima_keys.sh
@@ -6,9 +6,10 @@
 #
 # Verify that keys are measured correctly based on policy.
 
-TST_NEEDS_CMDS="cut grep sed tr xxd"
-TST_CNT=1
+TST_NEEDS_CMDS="grep cut sed tr xxd evmctl openssl keyctl"
+TST_CNT=2
 TST_NEEDS_DEVICE=1
+TST_NEEDS_ROOT=1
 
 . ima_setup.sh
 
@@ -58,4 +59,43 @@ test1()
 	tst_res TPASS "specified keyrings were measured correctly"
 }
 
+# Create a new keyring, import a certificate into it, and verify
+# that the certificate is measured correctly by IMA.
+test2() {
+	local new_keyring_id temp_file="file.txt" \
+		cert_file="$TST_DATAROOT/x509_ima.der"
+
+	if ! check_ima_policy_content '^measure.*func=KEY_CHECK.*keyrings=.*key_import_test'; then
+		tst_brk TCONF "the IMA policy does not include the key_import_test keyring. See the LTP IMA README."
+	fi
+
+	# Assuming this test is executed in a separate shell,
+	# create a new session that will be cleaned up when
+	# the shell exits.
+	keyctl new_session > /dev/null
+
+	new_keyring_id=$(keyctl newring key_import_test @s) || \
+		tst_brk TCONF "unable to create a new keyring"
+
+	tst_is_num "$new_keyring_id" || \
+		tst_brk TCONF "unable to parse the new keyring id"
+
+	evmctl import "$cert_file" "$new_keyring_id" > /dev/null || \
+		tst_brk TCONF "unable to import a cert into a the key_import_test keyring"
+
+	grep "key_import_test" "$ASCII_MEASUREMENTS" | tail -n1 | cut -d' ' -f6 | \
+		xxd -r -p > "$temp_file" || \
+		tst_brk TCONF "keyring not found in $ASCII_MEASUREMENTS"
+
+	if ! openssl x509 -in "$temp_file" -inform der > /dev/null; then
+		tst_brk TCONF "the cert logged in $ASCII_MEASUREMENTS is not a valid x509 certificate"
+	fi
+
+	if cmp -s "$temp_file" "$cert_file"; then
+		tst_res TPASS "logged cert matches original cert"
+	else
+		tst_res TFAIL "logged cert does not match original cert"
+	fi
+}
+
 tst_run
-- 
2.25.1

Re: [PATCH 1/3] IMA: Update key test documentation

[Petr Vorel]

Hi Lachlan,

> The current documentation for the existing IMA key test was
> left in by accident by a previous merge. It does not apply
> to the test that is currently included in the LTP.

> Update the documentation for the IMA key test.

Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Thanks for fixing this, I propose this changes:

Fixes: d2768c84e ("IMA: Add a test to verify measurement of keys")

> ---
>  .../kernel/security/integrity/ima/README.md   | 22 +++++--------------
>  1 file changed, 5 insertions(+), 17 deletions(-)

> diff --git a/testcases/kernel/security/integrity/ima/README.md b/testcases/kernel/security/integrity/ima/README.md
> index d4644ba39..2956ac7fd 100644
> --- a/testcases/kernel/security/integrity/ima/README.md
> +++ b/testcases/kernel/security/integrity/ima/README.md
> @@ -15,27 +15,15 @@ Although a custom policy, loaded via dracut, systemd or manually from user
>  space, may contain equivalent measurement tcb rules, detecting them would
>  require `IMA_READ_POLICY=y` therefore ignore this option.

> -### IMA key import test
> -`ima_keys.sh` requires a x509 public key, by default in `/etc/keys/x509_ima.der`
> -(defined in `CONFIG_IMA_X509_PATH` kernel config option).
> -The key must be signed by the private key you generate. Follow these instructions:
> -https://manpages.ubuntu.com/manpages/disco/man1/evmctl.1.html#generate%20trusted%20keys
> -
> -The test cannot be set-up automatically because the x509 public key must be
> -built into the kernel and loaded onto a trusted keyring
> -(e.g. `.builtin_trusted_keys`, `.secondary_trusted_keyring`).
> -
> -As well as what's required for the IMA tests, the following are also required
> -in the kernel configuration:
> +### IMA key test
> +`ima_keys.sh` requires a readable IMA policy, as well as a loaded policy
> +with `func=KEY_CHECK keyrings=...`, see example in `keycheck.policy`.
> +
> +Mandatory kernel configuration for IMA:
This "Mandatory kernel configuration for IMA:" would be in docs twice. The above
one (CONFIG_INTEGRITY=y, CONFIG_IMA=y) is required for all tests.
Take it that "### IMA key test" is header 3, but ## IMA tests
is header 2 (upper level).

>  ```
>  CONFIG_IMA_READ_POLICY=y
> -CONFIG_IMA_X509_PATH="/etc/keys/x509_ima.der"
> -CONFIG_SYSTEM_TRUSTED_KEYRING=y
> -CONFIG_SYSTEM_TRUSTED_KEYS="/etc/keys/ima-local-ca.pem"
>  ```

> -Test also requires loaded policy with `func=KEY_CHECK`, see example in `keycheck.policy`.
> -
>  ### IMA kexec test

>  `ima_kexec.sh` requires loaded policy which contains `measure func=KEXEC_CMDLINE`,

I also removed "IMA" from EVM tests header.

Kind regards,
Petr

diff --git testcases/kernel/security/integrity/ima/README.md testcases/kernel/security/integrity/ima/README.md
index 2956ac7fd..392e1e868 100644
--- testcases/kernel/security/integrity/ima/README.md
+++ testcases/kernel/security/integrity/ima/README.md
@@ -19,7 +19,8 @@ require `IMA_READ_POLICY=y` therefore ignore this option.
 `ima_keys.sh` requires a readable IMA policy, as well as a loaded policy
 with `func=KEY_CHECK keyrings=...`, see example in `keycheck.policy`.
 
-Mandatory kernel configuration for IMA:
+As well as what's required for the IMA tests, the following are also required
+-in the kernel configuration:
 ```
 CONFIG_IMA_READ_POLICY=y
 ```
@@ -38,7 +39,7 @@ To kexec a different kernel image export `IMA_KEXEC_IMAGE=<pathname>`.
 kernel parameter) which appraises the integrity of all files owned by root and EVM setup.
 Again, for simplicity ignore possibility to load requires rules via custom policy.
 
-Mandatory kernel configuration for IMA & EVM:
+Mandatory kernel configuration for EVM tests:
 ```
 CONFIG_INTEGRITY=y
 CONFIG_INTEGRITY_SIGNATURE=y
@@ -50,7 +51,7 @@ CONFIG_TRUSTED_KEYS=y
 CONFIG_ENCRYPTED_KEYS=y
 ```
 
-Example of installing IMA + EVM on openSUSE:
+Example of preparing environment on for EVM on openSUSE:
 
 * Boot install system with `ima_policy=tcb|appraise_tcb ima_appraise=fix evm=fix` kernel parameters
   (for IMA measurement, IMA appraisal and EVM protection)

[LTP] [PATCH 1/3] IMA: Update key test documentation

[Petr Vorel]

Hi Lachlan,

> The current documentation for the existing IMA key test was
> left in by accident by a previous merge. It does not apply
> to the test that is currently included in the LTP.

> Update the documentation for the IMA key test.

Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Thanks for fixing this, I propose this changes:

Fixes: d2768c84e ("IMA: Add a test to verify measurement of keys")

> ---
>  .../kernel/security/integrity/ima/README.md   | 22 +++++--------------
>  1 file changed, 5 insertions(+), 17 deletions(-)

> diff --git a/testcases/kernel/security/integrity/ima/README.md b/testcases/kernel/security/integrity/ima/README.md
> index d4644ba39..2956ac7fd 100644
> --- a/testcases/kernel/security/integrity/ima/README.md
> +++ b/testcases/kernel/security/integrity/ima/README.md
> @@ -15,27 +15,15 @@ Although a custom policy, loaded via dracut, systemd or manually from user
>  space, may contain equivalent measurement tcb rules, detecting them would
>  require `IMA_READ_POLICY=y` therefore ignore this option.

> -### IMA key import test
> -`ima_keys.sh` requires a x509 public key, by default in `/etc/keys/x509_ima.der`
> -(defined in `CONFIG_IMA_X509_PATH` kernel config option).
> -The key must be signed by the private key you generate. Follow these instructions:
> -https://manpages.ubuntu.com/manpages/disco/man1/evmctl.1.html#generate%20trusted%20keys
> -
> -The test cannot be set-up automatically because the x509 public key must be
> -built into the kernel and loaded onto a trusted keyring
> -(e.g. `.builtin_trusted_keys`, `.secondary_trusted_keyring`).
> -
> -As well as what's required for the IMA tests, the following are also required
> -in the kernel configuration:
> +### IMA key test
> +`ima_keys.sh` requires a readable IMA policy, as well as a loaded policy
> +with `func=KEY_CHECK keyrings=...`, see example in `keycheck.policy`.
> +
> +Mandatory kernel configuration for IMA:
This "Mandatory kernel configuration for IMA:" would be in docs twice. The above
one (CONFIG_INTEGRITY=y, CONFIG_IMA=y) is required for all tests.
Take it that "### IMA key test" is header 3, but ## IMA tests
is header 2 (upper level).

>  ```
>  CONFIG_IMA_READ_POLICY=y
> -CONFIG_IMA_X509_PATH="/etc/keys/x509_ima.der"
> -CONFIG_SYSTEM_TRUSTED_KEYRING=y
> -CONFIG_SYSTEM_TRUSTED_KEYS="/etc/keys/ima-local-ca.pem"
>  ```

> -Test also requires loaded policy with `func=KEY_CHECK`, see example in `keycheck.policy`.
> -
>  ### IMA kexec test

>  `ima_kexec.sh` requires loaded policy which contains `measure func=KEXEC_CMDLINE`,

I also removed "IMA" from EVM tests header.

Kind regards,
Petr

diff --git testcases/kernel/security/integrity/ima/README.md testcases/kernel/security/integrity/ima/README.md
index 2956ac7fd..392e1e868 100644
--- testcases/kernel/security/integrity/ima/README.md
+++ testcases/kernel/security/integrity/ima/README.md
@@ -19,7 +19,8 @@ require `IMA_READ_POLICY=y` therefore ignore this option.
 `ima_keys.sh` requires a readable IMA policy, as well as a loaded policy
 with `func=KEY_CHECK keyrings=...`, see example in `keycheck.policy`.
 
-Mandatory kernel configuration for IMA:
+As well as what's required for the IMA tests, the following are also required
+-in the kernel configuration:
 ```
 CONFIG_IMA_READ_POLICY=y
 ```
@@ -38,7 +39,7 @@ To kexec a different kernel image export `IMA_KEXEC_IMAGE=<pathname>`.
 kernel parameter) which appraises the integrity of all files owned by root and EVM setup.
 Again, for simplicity ignore possibility to load requires rules via custom policy.
 
-Mandatory kernel configuration for IMA & EVM:
+Mandatory kernel configuration for EVM tests:
 ```
 CONFIG_INTEGRITY=y
 CONFIG_INTEGRITY_SIGNATURE=y
@@ -50,7 +51,7 @@ CONFIG_TRUSTED_KEYS=y
 CONFIG_ENCRYPTED_KEYS=y
 ```
 
-Example of installing IMA + EVM on openSUSE:
+Example of preparing environment on for EVM on openSUSE:
 
 * Boot install system with `ima_policy=tcb|appraise_tcb ima_appraise=fix evm=fix` kernel parameters
   (for IMA measurement, IMA appraisal and EVM protection)

Re: [PATCH 1/3] IMA: Update key test documentation

[Lachlan Sneff]

Hi Petr,
Thanks for updating the readme. Should I send a new patch with
the changes you have proposed?

Thanks,
Lachlan

On 8/4/20 12:35 AM, Petr Vorel wrote:
> Hi Lachlan,
>
>> The current documentation for the existing IMA key test was
>> left in by accident by a previous merge. It does not apply
>> to the test that is currently included in the LTP.
>> Update the documentation for the IMA key test.
> Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
> Thanks for fixing this, I propose this changes:
>
> Fixes: d2768c84e ("IMA: Add a test to verify measurement of keys")
>
>> ---
>>   .../kernel/security/integrity/ima/README.md   | 22 +++++--------------
>>   1 file changed, 5 insertions(+), 17 deletions(-)
>> diff --git a/testcases/kernel/security/integrity/ima/README.md b/testcases/kernel/security/integrity/ima/README.md
>> index d4644ba39..2956ac7fd 100644
>> --- a/testcases/kernel/security/integrity/ima/README.md
>> +++ b/testcases/kernel/security/integrity/ima/README.md
>> @@ -15,27 +15,15 @@ Although a custom policy, loaded via dracut, systemd or manually from user
>>   space, may contain equivalent measurement tcb rules, detecting them would
>>   require `IMA_READ_POLICY=y` therefore ignore this option.
>> -### IMA key import test
>> -`ima_keys.sh` requires a x509 public key, by default in `/etc/keys/x509_ima.der`
>> -(defined in `CONFIG_IMA_X509_PATH` kernel config option).
>> -The key must be signed by the private key you generate. Follow these instructions:
>> -https://manpages.ubuntu.com/manpages/disco/man1/evmctl.1.html#generate%20trusted%20keys
>> -
>> -The test cannot be set-up automatically because the x509 public key must be
>> -built into the kernel and loaded onto a trusted keyring
>> -(e.g. `.builtin_trusted_keys`, `.secondary_trusted_keyring`).
>> -
>> -As well as what's required for the IMA tests, the following are also required
>> -in the kernel configuration:
>> +### IMA key test
>> +`ima_keys.sh` requires a readable IMA policy, as well as a loaded policy
>> +with `func=KEY_CHECK keyrings=...`, see example in `keycheck.policy`.
>> +
>> +Mandatory kernel configuration for IMA:
> This "Mandatory kernel configuration for IMA:" would be in docs twice. The above
> one (CONFIG_INTEGRITY=y, CONFIG_IMA=y) is required for all tests.
> Take it that "### IMA key test" is header 3, but ## IMA tests
> is header 2 (upper level).
>
>>   ```
>>   CONFIG_IMA_READ_POLICY=y
>> -CONFIG_IMA_X509_PATH="/etc/keys/x509_ima.der"
>> -CONFIG_SYSTEM_TRUSTED_KEYRING=y
>> -CONFIG_SYSTEM_TRUSTED_KEYS="/etc/keys/ima-local-ca.pem"
>>   ```
>> -Test also requires loaded policy with `func=KEY_CHECK`, see example in `keycheck.policy`.
>> -
>>   ### IMA kexec test
>>   `ima_kexec.sh` requires loaded policy which contains `measure func=KEXEC_CMDLINE`,
> I also removed "IMA" from EVM tests header.
>
> Kind regards,
> Petr
>
> diff --git testcases/kernel/security/integrity/ima/README.md testcases/kernel/security/integrity/ima/README.md
> index 2956ac7fd..392e1e868 100644
> --- testcases/kernel/security/integrity/ima/README.md
> +++ testcases/kernel/security/integrity/ima/README.md
> @@ -19,7 +19,8 @@ require `IMA_READ_POLICY=y` therefore ignore this option.
>   `ima_keys.sh` requires a readable IMA policy, as well as a loaded policy
>   with `func=KEY_CHECK keyrings=...`, see example in `keycheck.policy`.
>   
> -Mandatory kernel configuration for IMA:
> +As well as what's required for the IMA tests, the following are also required
> +-in the kernel configuration:
>   ```
>   CONFIG_IMA_READ_POLICY=y
>   ```
> @@ -38,7 +39,7 @@ To kexec a different kernel image export `IMA_KEXEC_IMAGE=<pathname>`.
>   kernel parameter) which appraises the integrity of all files owned by root and EVM setup.
>   Again, for simplicity ignore possibility to load requires rules via custom policy.
>   
> -Mandatory kernel configuration for IMA & EVM:
> +Mandatory kernel configuration for EVM tests:
>   ```
>   CONFIG_INTEGRITY=y
>   CONFIG_INTEGRITY_SIGNATURE=y
> @@ -50,7 +51,7 @@ CONFIG_TRUSTED_KEYS=y
>   CONFIG_ENCRYPTED_KEYS=y
>   ```
>   
> -Example of installing IMA + EVM on openSUSE:
> +Example of preparing environment on for EVM on openSUSE:
>   
>   * Boot install system with `ima_policy=tcb|appraise_tcb ima_appraise=fix evm=fix` kernel parameters
>     (for IMA measurement, IMA appraisal and EVM protection)

[LTP] [PATCH 1/3] IMA: Update key test documentation

[Lachlan Sneff]

Hi Petr,
Thanks for updating the readme. Should I send a new patch with
the changes you have proposed?

Thanks,
Lachlan

On 8/4/20 12:35 AM, Petr Vorel wrote:
> Hi Lachlan,
>
>> The current documentation for the existing IMA key test was
>> left in by accident by a previous merge. It does not apply
>> to the test that is currently included in the LTP.
>> Update the documentation for the IMA key test.
> Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
> Thanks for fixing this, I propose this changes:
>
> Fixes: d2768c84e ("IMA: Add a test to verify measurement of keys")
>
>> ---
>>   .../kernel/security/integrity/ima/README.md   | 22 +++++--------------
>>   1 file changed, 5 insertions(+), 17 deletions(-)
>> diff --git a/testcases/kernel/security/integrity/ima/README.md b/testcases/kernel/security/integrity/ima/README.md
>> index d4644ba39..2956ac7fd 100644
>> --- a/testcases/kernel/security/integrity/ima/README.md
>> +++ b/testcases/kernel/security/integrity/ima/README.md
>> @@ -15,27 +15,15 @@ Although a custom policy, loaded via dracut, systemd or manually from user
>>   space, may contain equivalent measurement tcb rules, detecting them would
>>   require `IMA_READ_POLICY=y` therefore ignore this option.
>> -### IMA key import test
>> -`ima_keys.sh` requires a x509 public key, by default in `/etc/keys/x509_ima.der`
>> -(defined in `CONFIG_IMA_X509_PATH` kernel config option).
>> -The key must be signed by the private key you generate. Follow these instructions:
>> -https://manpages.ubuntu.com/manpages/disco/man1/evmctl.1.html#generate%20trusted%20keys
>> -
>> -The test cannot be set-up automatically because the x509 public key must be
>> -built into the kernel and loaded onto a trusted keyring
>> -(e.g. `.builtin_trusted_keys`, `.secondary_trusted_keyring`).
>> -
>> -As well as what's required for the IMA tests, the following are also required
>> -in the kernel configuration:
>> +### IMA key test
>> +`ima_keys.sh` requires a readable IMA policy, as well as a loaded policy
>> +with `func=KEY_CHECK keyrings=...`, see example in `keycheck.policy`.
>> +
>> +Mandatory kernel configuration for IMA:
> This "Mandatory kernel configuration for IMA:" would be in docs twice. The above
> one (CONFIG_INTEGRITY=y, CONFIG_IMA=y) is required for all tests.
> Take it that "### IMA key test" is header 3, but ## IMA tests
> is header 2 (upper level).
>
>>   ```
>>   CONFIG_IMA_READ_POLICY=y
>> -CONFIG_IMA_X509_PATH="/etc/keys/x509_ima.der"
>> -CONFIG_SYSTEM_TRUSTED_KEYRING=y
>> -CONFIG_SYSTEM_TRUSTED_KEYS="/etc/keys/ima-local-ca.pem"
>>   ```
>> -Test also requires loaded policy with `func=KEY_CHECK`, see example in `keycheck.policy`.
>> -
>>   ### IMA kexec test
>>   `ima_kexec.sh` requires loaded policy which contains `measure func=KEXEC_CMDLINE`,
> I also removed "IMA" from EVM tests header.
>
> Kind regards,
> Petr
>
> diff --git testcases/kernel/security/integrity/ima/README.md testcases/kernel/security/integrity/ima/README.md
> index 2956ac7fd..392e1e868 100644
> --- testcases/kernel/security/integrity/ima/README.md
> +++ testcases/kernel/security/integrity/ima/README.md
> @@ -19,7 +19,8 @@ require `IMA_READ_POLICY=y` therefore ignore this option.
>   `ima_keys.sh` requires a readable IMA policy, as well as a loaded policy
>   with `func=KEY_CHECK keyrings=...`, see example in `keycheck.policy`.
>   
> -Mandatory kernel configuration for IMA:
> +As well as what's required for the IMA tests, the following are also required
> +-in the kernel configuration:
>   ```
>   CONFIG_IMA_READ_POLICY=y
>   ```
> @@ -38,7 +39,7 @@ To kexec a different kernel image export `IMA_KEXEC_IMAGE=<pathname>`.
>   kernel parameter) which appraises the integrity of all files owned by root and EVM setup.
>   Again, for simplicity ignore possibility to load requires rules via custom policy.
>   
> -Mandatory kernel configuration for IMA & EVM:
> +Mandatory kernel configuration for EVM tests:
>   ```
>   CONFIG_INTEGRITY=y
>   CONFIG_INTEGRITY_SIGNATURE=y
> @@ -50,7 +51,7 @@ CONFIG_TRUSTED_KEYS=y
>   CONFIG_ENCRYPTED_KEYS=y
>   ```
>   
> -Example of installing IMA + EVM on openSUSE:
> +Example of preparing environment on for EVM on openSUSE:
>   
>   * Boot install system with `ima_policy=tcb|appraise_tcb ima_appraise=fix evm=fix` kernel parameters
>     (for IMA measurement, IMA appraisal and EVM protection)

Re: [PATCH 1/3] IMA: Update key test documentation

[Petr Vorel]

Hi Lachlan,

> Hi Petr,
> Thanks for updating the readme. Should I send a new patch with
> the changes you have proposed?
No, I'll just fix it before merging this patch.

Kind regards,
Petr

[LTP] [PATCH 1/3] IMA: Update key test documentation

[Petr Vorel]

Hi Lachlan,

> Hi Petr,
> Thanks for updating the readme. Should I send a new patch with
> the changes you have proposed?
No, I'll just fix it before merging this patch.

Kind regards,
Petr

Re: [PATCH 1/3] IMA: Update key test documentation

[Petr Vorel]

Hi Lachlan,

Merged, with slightly changed text.
Sorry for introducing this error.
Forged to add Fixes: :(.

Kind regards,
Petr

[LTP] [PATCH 1/3] IMA: Update key test documentation

[Petr Vorel]

Hi Lachlan,

Merged, with slightly changed text.
Sorry for introducing this error.
Forged to add Fixes: :(.

Kind regards,
Petr

Re: [PATCH 2/3] IMA: Refactor datafiles directory

[Petr Vorel]

Hi Lachlan,

> The IMA datafiles directory is structured so that it cannot be directly
> expanded to include datafiles for tests other than `ima_policy.sh`.

> Move the contents of the IMA datafiles directory into an IMA
> datafiles/policy directory.

Why it's required? Can't you use glob for inclusion?

*.policy for valid policies
*.policy-invalid for invalid policies
*.policy* for all policies

BTW I plan to use policies for other tests than just ima_policy.sh

I don't refuse this patch, I just simply don't understand why it's required.

Kind regards,
Petr

[LTP] [PATCH 2/3] IMA: Refactor datafiles directory

[Petr Vorel]

Hi Lachlan,

> The IMA datafiles directory is structured so that it cannot be directly
> expanded to include datafiles for tests other than `ima_policy.sh`.

> Move the contents of the IMA datafiles directory into an IMA
> datafiles/policy directory.

Why it's required? Can't you use glob for inclusion?

*.policy for valid policies
*.policy-invalid for invalid policies
*.policy* for all policies

BTW I plan to use policies for other tests than just ima_policy.sh

I don't refuse this patch, I just simply don't understand why it's required.

Kind regards,
Petr

Re: [PATCH 2/3] IMA: Refactor datafiles directory

[Petr Vorel]

Hi Lachlan,

> > The IMA datafiles directory is structured so that it cannot be directly
> > expanded to include datafiles for tests other than `ima_policy.sh`.

> > Move the contents of the IMA datafiles directory into an IMA
> > datafiles/policy directory.

> Why it's required? Can't you use glob for inclusion?

> *.policy for valid policies
> *.policy-invalid for invalid policies
> *.policy* for all policies

> BTW I plan to use policies for other tests than just ima_policy.sh

> I don't refuse this patch, I just simply don't understand why it's required.

OK, I got that. Looking into $TST_DATAROOT is self explanatory.
Reviewed-by: Petr Vorel <pvorel@suse.cz>

And I plan to use IMA policy as well for more tests will require some trick,
but that's another story.

Kind regards,
Petr

[LTP] [PATCH 2/3] IMA: Refactor datafiles directory

[Petr Vorel]

Hi Lachlan,

> > The IMA datafiles directory is structured so that it cannot be directly
> > expanded to include datafiles for tests other than `ima_policy.sh`.

> > Move the contents of the IMA datafiles directory into an IMA
> > datafiles/policy directory.

> Why it's required? Can't you use glob for inclusion?

> *.policy for valid policies
> *.policy-invalid for invalid policies
> *.policy* for all policies

> BTW I plan to use policies for other tests than just ima_policy.sh

> I don't refuse this patch, I just simply don't understand why it's required.

OK, I got that. Looking into $TST_DATAROOT is self explanatory.
Reviewed-by: Petr Vorel <pvorel@suse.cz>

And I plan to use IMA policy as well for more tests will require some trick,
but that's another story.

Kind regards,
Petr

Re: [PATCH 2/3] IMA: Refactor datafiles directory

[Petr Vorel]

Hi Lachlan,

> > > The IMA datafiles directory is structured so that it cannot be directly
> > > expanded to include datafiles for tests other than `ima_policy.sh`.

> > > Move the contents of the IMA datafiles directory into an IMA
> > > datafiles/policy directory.

> > Why it's required? Can't you use glob for inclusion?

> > *.policy for valid policies
> > *.policy-invalid for invalid policies
> > *.policy* for all policies

> > BTW I plan to use policies for other tests than just ima_policy.sh

> > I don't refuse this patch, I just simply don't understand why it's required.

> OK, I got that. Looking into $TST_DATAROOT is self explanatory.
> Reviewed-by: Petr Vorel <pvorel@suse.cz>

> And I plan to use IMA policy as well for more tests will require some trick,
> but that's another story.

Thinking about it twice, keycheck.policy and kexec.policy should not be in
/opt/ltp/testcases/data/ima_policy/ as they belong to the their tests
(ima_keys.sh resp. ima_kexec.sh). I forget where are installed due "policy"
(the name of the directory).

I'll send v2 (altogether with fixes for the test) to speedup the things.

Kind regards,
Petr

[LTP] [PATCH 2/3] IMA: Refactor datafiles directory

[Petr Vorel]

Hi Lachlan,

> > > The IMA datafiles directory is structured so that it cannot be directly
> > > expanded to include datafiles for tests other than `ima_policy.sh`.

> > > Move the contents of the IMA datafiles directory into an IMA
> > > datafiles/policy directory.

> > Why it's required? Can't you use glob for inclusion?

> > *.policy for valid policies
> > *.policy-invalid for invalid policies
> > *.policy* for all policies

> > BTW I plan to use policies for other tests than just ima_policy.sh

> > I don't refuse this patch, I just simply don't understand why it's required.

> OK, I got that. Looking into $TST_DATAROOT is self explanatory.
> Reviewed-by: Petr Vorel <pvorel@suse.cz>

> And I plan to use IMA policy as well for more tests will require some trick,
> but that's another story.

Thinking about it twice, keycheck.policy and kexec.policy should not be in
/opt/ltp/testcases/data/ima_policy/ as they belong to the their tests
(ima_keys.sh resp. ima_kexec.sh). I forget where are installed due "policy"
(the name of the directory).

I'll send v2 (altogether with fixes for the test) to speedup the things.

Kind regards,
Petr

[PATCH 2/3] IMA: Refactor datafiles directory

[Lachlan Sneff]

The IMA datafiles directory is structured so that it cannot be directly
expanded to include datafiles for tests other than `ima_policy.sh`.

Move the contents of the IMA datafiles directory into an IMA
datafiles/policy directory.

Signed-off-by: Lachlan Sneff <t-josne@linux.microsoft.com>
---
 .../security/integrity/ima/datafiles/Makefile     |  6 ++----
 .../integrity/ima/datafiles/policy/Makefile       | 15 +++++++++++++++
 .../ima/datafiles/{ => policy}/kexec.policy       |  0
 .../ima/datafiles/{ => policy}/keycheck.policy    |  0
 .../ima/datafiles/{ => policy}/measure.policy     |  0
 .../datafiles/{ => policy}/measure.policy-invalid |  0
 6 files changed, 17 insertions(+), 4 deletions(-)
 create mode 100644 testcases/kernel/security/integrity/ima/datafiles/policy/Makefile
 rename testcases/kernel/security/integrity/ima/datafiles/{ => policy}/kexec.policy (100%)
 rename testcases/kernel/security/integrity/ima/datafiles/{ => policy}/keycheck.policy (100%)
 rename testcases/kernel/security/integrity/ima/datafiles/{ => policy}/measure.policy (100%)
 rename testcases/kernel/security/integrity/ima/datafiles/{ => policy}/measure.policy-invalid (100%)

diff --git a/testcases/kernel/security/integrity/ima/datafiles/Makefile b/testcases/kernel/security/integrity/ima/datafiles/Makefile
index 369407112..3772e9a03 100644
--- a/testcases/kernel/security/integrity/ima/datafiles/Makefile
+++ b/testcases/kernel/security/integrity/ima/datafiles/Makefile
@@ -24,8 +24,6 @@ top_srcdir		?= ../../../../../..
 
 include	$(top_srcdir)/include/mk/env_pre.mk
 
-INSTALL_DIR		:= testcases/data/ima_policy
+SUBDIRS			:= policy
 
-INSTALL_TARGETS		:= measure.policy-invalid *.policy
-
-include $(top_srcdir)/include/mk/generic_leaf_target.mk
+include $(top_srcdir)/include/mk/generic_trunk_target.mk
diff --git a/testcases/kernel/security/integrity/ima/datafiles/policy/Makefile b/testcases/kernel/security/integrity/ima/datafiles/policy/Makefile
new file mode 100644
index 000000000..84d1424c6
--- /dev/null
+++ b/testcases/kernel/security/integrity/ima/datafiles/policy/Makefile
@@ -0,0 +1,15 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2020 Microsoft Corporation
+# Author: Lachlan Sneff <t-josne@linux.microsoft.com>
+#
+# IMA datafiles/policy Makefile
+
+top_srcdir		?= ../../../../../../..
+
+include	$(top_srcdir)/include/mk/env_pre.mk
+
+INSTALL_DIR		:= testcases/data/ima_policy
+
+INSTALL_TARGETS		:= measure.policy-invalid *.policy
+
+include $(top_srcdir)/include/mk/generic_leaf_target.mk
\ No newline at end of file
diff --git a/testcases/kernel/security/integrity/ima/datafiles/kexec.policy b/testcases/kernel/security/integrity/ima/datafiles/policy/kexec.policy
similarity index 100%
rename from testcases/kernel/security/integrity/ima/datafiles/kexec.policy
rename to testcases/kernel/security/integrity/ima/datafiles/policy/kexec.policy
diff --git a/testcases/kernel/security/integrity/ima/datafiles/keycheck.policy b/testcases/kernel/security/integrity/ima/datafiles/policy/keycheck.policy
similarity index 100%
rename from testcases/kernel/security/integrity/ima/datafiles/keycheck.policy
rename to testcases/kernel/security/integrity/ima/datafiles/policy/keycheck.policy
diff --git a/testcases/kernel/security/integrity/ima/datafiles/measure.policy b/testcases/kernel/security/integrity/ima/datafiles/policy/measure.policy
similarity index 100%
rename from testcases/kernel/security/integrity/ima/datafiles/measure.policy
rename to testcases/kernel/security/integrity/ima/datafiles/policy/measure.policy
diff --git a/testcases/kernel/security/integrity/ima/datafiles/measure.policy-invalid b/testcases/kernel/security/integrity/ima/datafiles/policy/measure.policy-invalid
similarity index 100%
rename from testcases/kernel/security/integrity/ima/datafiles/measure.policy-invalid
rename to testcases/kernel/security/integrity/ima/datafiles/policy/measure.policy-invalid
-- 
2.25.1