From: Rob Herring <robh@kernel.org> To: Rohit kumar <rohitkr@codeaurora.org> Cc: agross@kernel.org, bjorn.andersson@linaro.org, lgirdwood@gmail.com, broonie@kernel.org, plai@codeaurora.org, bgoswami@codeaurora.org, perex@perex.cz, tiwai@suse.com, srinivas.kandagatla@linaro.org, linux-arm-msm@vger.kernel.org, alsa-devel@alsa-project.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v5 12/12] dt-bindings: sound: lpass-cpu: Move to yaml format Date: Thu, 6 Aug 2020 08:33:48 -0600 [thread overview] Message-ID: <20200806143348.GA807751@bogus> (raw) In-Reply-To: <1596528453-11437-13-git-send-email-rohitkr@codeaurora.org> On Tue, Aug 04, 2020 at 01:37:33PM +0530, Rohit kumar wrote: > Update lpass-cpu binding with yaml formats. > > Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> > --- > .../devicetree/bindings/sound/qcom,lpass-cpu.txt | 130 --------------- > .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 179 +++++++++++++++++++++ > 2 files changed, 179 insertions(+), 130 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt > create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml > > diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt > deleted file mode 100644 > index c07202c..00000000 > --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt > +++ /dev/null > @@ -1,130 +0,0 @@ > -* Qualcomm Technologies LPASS CPU DAI > - > -This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS). > - > -Required properties: > - > -- compatible : "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or > - "qcom,sc7180-lpass-cpu" > -- clocks : Must contain an entry for each entry in clock-names. > -- clock-names : A list which must include the following entries: > - * "ahbix-clk" > - * "mi2s-osr-clk" > - * "mi2s-bit-clk" > - : required clocks for "qcom,lpass-cpu-apq8016" > - * "ahbix-clk" > - * "mi2s-bit-clk0" > - * "mi2s-bit-clk1" > - * "mi2s-bit-clk2" > - * "mi2s-bit-clk3" > - * "pcnoc-mport-clk" > - * "pcnoc-sway-clk" > - : required clocks for "qcom,lpass-cpu-sc7180" > - * "audio-core" > - * "mclk0" > - * "mi2s-bit-clk0" > - * "mi2s-bit-clk1" > - * "pcnoc-sway-clk" > - * "pcnoc-mport-clk" > - > -- interrupts : Must contain an entry for each entry in > - interrupt-names. > -- interrupt-names : A list which must include the following entries: > - * "lpass-irq-lpaif" > -- pinctrl-N : One property must exist for each entry in > - pinctrl-names. See ../pinctrl/pinctrl-bindings.txt > - for details of the property values. > -- pinctrl-names : Must contain a "default" entry. > -- reg : Must contain an address for each entry in reg-names. > -- reg-names : A list which must include the following entries: > - * "lpass-lpaif" > -- #address-cells : Must be 1 > -- #size-cells : Must be 0 > - > - > - > -Optional properties: > - > -- qcom,adsp : Phandle for the audio DSP node > - > -By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels. > -The SD lines to use can be configured by adding subnodes for each of the DAIs. > - > -Required properties for each DAI (represented by a subnode): > -- reg : Must be one of the DAI IDs > - (usually part of dt-bindings header) > -- qcom,playback-sd-lines: List of serial data lines to use for playback > - Each SD line should be represented by a number from 0-3. > -- qcom,capture-sd-lines : List of serial data lines to use for capture > - Each SD line should be represented by a number from 0-3. > - > -Note that adding a subnode changes the default to "no lines configured", > -so both playback and capture lines should be configured when a subnode is added. > - > -Examples: > -1) > - > -lpass@28100000 { > - compatible = "qcom,lpass-cpu"; > - clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>; > - clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk"; > - interrupts = <0 85 1>; > - interrupt-names = "lpass-irq-lpaif"; > - pinctrl-names = "default", "idle"; > - pinctrl-0 = <&mi2s_default>; > - pinctrl-1 = <&mi2s_idle>; > - reg = <0x28100000 0x10000>; > - reg-names = "lpass-lpaif"; > - qcom,adsp = <&adsp>; > - > - #address-cells = <1>; > - #size-cells = <0>; > - > - /* Optional to set different MI2S SD lines */ > - dai@3 { > - reg = <MI2S_QUATERNARY>; > - qcom,playback-sd-lines = <0 1>; > - }; > -}; > - > -2) > - > -#include <dt-bindings/sound/sc7180-lpass.h> > - > -lpass_cpu: lpass { > - compatible = "qcom,sc7180-lpass-cpu"; > - > - reg = <0 0x62F00000 0 0x29000>; > - > - iommus = <&apps_smmu 0x1020 0>; > - > - power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; > - clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, > - <&lpasscorecc LPASS_AUDIO_CORE_CORE_CLK>, > - <&lpasscorecc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>, > - <&lpasscorecc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>, > - <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>, > - <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>; > - clock-names = "pcnoc-sway-clk", "audio-core", > - "mclk0", "pcnoc-mport-clk", > - "mi2s-bit-clk0", "mi2s-bit-clk1"; > - interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "lpass-irq-lpaif"; > - > - > - #sound-dai-cells = <1>; > - > - #address-cells = <1>; > - #size-cells = <0>; > - > - mi2s-primary@0 { > - reg = <MI2S_PRIMARY>; > - qcom,playback-sd-lines = <1>; > - qcom,capture-sd-lines = <0>; > - }; > - > - mi2s-secondary@1 { > - reg = <MI2S_SECONDARY>; > - qcom,playback-sd-lines = <0>; > - }; > -}; > diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml > new file mode 100644 > index 00000000..5c1881d > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml > @@ -0,0 +1,179 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies Inc. LPASS CPU dai driver bindings > + > +maintainers: > + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > + - Rohit kumar <rohitkr@codeaurora.org> > + > +description: | > + Qualcomm Technologies Inc. SOC Low-Power Audio SubSystem (LPASS) that consist > + of MI2S interface for audio data transfer on external codecs. LPASS cpu driver > + is a module to configure Low-Power Audio Interface(LPAIF) core registers > + across different IP versions. > + > +properties: > + compatible: > + enum: > + - qcom,lpass-cpu > + - qcom,apq8016-lpass-cpu > + - qcom,sc7180-lpass-cpu > + > + reg: > + maxItems: 1 > + description: LPAIF core registers > + > + clocks: > + minItems: 3 > + maxItems: 6 > + > + clock-names: > + minItems: 3 > + maxItems: 6 > + > + interrupts: > + maxItems: 1 > + description: LPAIF DMA buffer interrupt > + > + qcom,adsp: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: Phandle for the audio DSP node > + > + iommus: > + maxItems: 1 > + description: Phandle to apps_smmu node with sid mask > + > + power-domains: > + maxItems: 1 > + > + '#sound-dai-cells': > + const: 1 > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > +patternProperties: > + "(^mi2s-[0-9a-f]$|mi2s)": I believe this will work: "^mi2s(-[0-9a-f])?$" > + type: object > + description: Required properties for each DAI > + > + properties: > + reg: > + maxItems: 1 > + description: Must be one of the DAI ID > + > + required: > + - reg additionalProperties: false > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - interrupts > + - '#sound-dai-cells' > + > +additionalProperties: false > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + const: qcom,lpass-cpu > + > + then: > + properties: > + clock-names: > + items: > + - const: ahbix-clk > + - const: mi2s-osr-clk > + - const: mi2s-bit-clk > + > + - if: > + properties: > + compatible: > + contains: > + const: qcom,apq8016-lpass-cpu > + > + then: > + properties: > + clock-names: > + items: > + - const: ahbix-clk > + - const: mi2s-bit-clk0 > + - const: mi2s-bit-clk1 > + - const: mi2s-bit-clk2 > + - const: mi2s-bit-clk3 > + - const: pcnoc-mport-clk > + - const: pcnoc-sway-clk > + > + - if: > + properties: > + compatible: > + contains: > + const: qcom,sc7180-lpass-cpu > + > + then: > + properties: > + clock-names: > + items: > + - const: pcnoc-sway-clk > + - const: audio-core > + - const: mclk0 > + - const: pcnoc-mport-clk > + - const: mi2s-bit-clk0 > + - const: mi2s-bit-clk1 > + required: > + - iommus > + - power-domains > + > +examples: > + - | > + #include <dt-bindings/sound/sc7180-lpass.h> > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + lpass@62f00000 { > + compatible = "qcom,sc7180-lpass-cpu"; > + > + reg = <0 0x62f00000 0 0x29000>; > + > + iommus = <&apps_smmu 0x1020 0>; > + power-domains = <&lpass_hm 0>; > + > + clocks = <&gcc 131>, > + <&lpasscorecc 6>, > + <&lpasscorecc 7>, > + <&lpasscorecc 10>, > + <&lpasscorecc 8>, > + <&lpasscorecc 9>; > + > + clock-names = "pcnoc-sway-clk", "audio-core", > + "mclk0", "pcnoc-mport-clk", > + "mi2s-bit-clk0", "mi2s-bit-clk1"; > + > + interrupts = <0 160 1>; > + > + #sound-dai-cells = <1>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + /* Optional to set different MI2S SD lines */ > + mi2s-primary@0 { > + reg = <MI2S_PRIMARY>; > + qcom,playback-sd-lines = <1>; > + qcom,capture-sd-lines = <0>; These 2 aren't documented. Rob
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org> To: Rohit kumar <rohitkr@codeaurora.org> Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org, bgoswami@codeaurora.org, linux-arm-msm@vger.kernel.org, plai@codeaurora.org, tiwai@suse.com, agross@kernel.org, lgirdwood@gmail.com, broonie@kernel.org, srinivas.kandagatla@linaro.org, bjorn.andersson@linaro.org, linux-kernel@vger.kernel.org Subject: Re: [PATCH v5 12/12] dt-bindings: sound: lpass-cpu: Move to yaml format Date: Thu, 6 Aug 2020 08:33:48 -0600 [thread overview] Message-ID: <20200806143348.GA807751@bogus> (raw) In-Reply-To: <1596528453-11437-13-git-send-email-rohitkr@codeaurora.org> On Tue, Aug 04, 2020 at 01:37:33PM +0530, Rohit kumar wrote: > Update lpass-cpu binding with yaml formats. > > Signed-off-by: Rohit kumar <rohitkr@codeaurora.org> > --- > .../devicetree/bindings/sound/qcom,lpass-cpu.txt | 130 --------------- > .../devicetree/bindings/sound/qcom,lpass-cpu.yaml | 179 +++++++++++++++++++++ > 2 files changed, 179 insertions(+), 130 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt > create mode 100644 Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml > > diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt > deleted file mode 100644 > index c07202c..00000000 > --- a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.txt > +++ /dev/null > @@ -1,130 +0,0 @@ > -* Qualcomm Technologies LPASS CPU DAI > - > -This node models the Qualcomm Technologies Low-Power Audio SubSystem (LPASS). > - > -Required properties: > - > -- compatible : "qcom,lpass-cpu" or "qcom,apq8016-lpass-cpu" or > - "qcom,sc7180-lpass-cpu" > -- clocks : Must contain an entry for each entry in clock-names. > -- clock-names : A list which must include the following entries: > - * "ahbix-clk" > - * "mi2s-osr-clk" > - * "mi2s-bit-clk" > - : required clocks for "qcom,lpass-cpu-apq8016" > - * "ahbix-clk" > - * "mi2s-bit-clk0" > - * "mi2s-bit-clk1" > - * "mi2s-bit-clk2" > - * "mi2s-bit-clk3" > - * "pcnoc-mport-clk" > - * "pcnoc-sway-clk" > - : required clocks for "qcom,lpass-cpu-sc7180" > - * "audio-core" > - * "mclk0" > - * "mi2s-bit-clk0" > - * "mi2s-bit-clk1" > - * "pcnoc-sway-clk" > - * "pcnoc-mport-clk" > - > -- interrupts : Must contain an entry for each entry in > - interrupt-names. > -- interrupt-names : A list which must include the following entries: > - * "lpass-irq-lpaif" > -- pinctrl-N : One property must exist for each entry in > - pinctrl-names. See ../pinctrl/pinctrl-bindings.txt > - for details of the property values. > -- pinctrl-names : Must contain a "default" entry. > -- reg : Must contain an address for each entry in reg-names. > -- reg-names : A list which must include the following entries: > - * "lpass-lpaif" > -- #address-cells : Must be 1 > -- #size-cells : Must be 0 > - > - > - > -Optional properties: > - > -- qcom,adsp : Phandle for the audio DSP node > - > -By default, the driver uses up to 4 MI2S SD lines, for a total of 8 channels. > -The SD lines to use can be configured by adding subnodes for each of the DAIs. > - > -Required properties for each DAI (represented by a subnode): > -- reg : Must be one of the DAI IDs > - (usually part of dt-bindings header) > -- qcom,playback-sd-lines: List of serial data lines to use for playback > - Each SD line should be represented by a number from 0-3. > -- qcom,capture-sd-lines : List of serial data lines to use for capture > - Each SD line should be represented by a number from 0-3. > - > -Note that adding a subnode changes the default to "no lines configured", > -so both playback and capture lines should be configured when a subnode is added. > - > -Examples: > -1) > - > -lpass@28100000 { > - compatible = "qcom,lpass-cpu"; > - clocks = <&lcc AHBIX_CLK>, <&lcc MI2S_OSR_CLK>, <&lcc MI2S_BIT_CLK>; > - clock-names = "ahbix-clk", "mi2s-osr-clk", "mi2s-bit-clk"; > - interrupts = <0 85 1>; > - interrupt-names = "lpass-irq-lpaif"; > - pinctrl-names = "default", "idle"; > - pinctrl-0 = <&mi2s_default>; > - pinctrl-1 = <&mi2s_idle>; > - reg = <0x28100000 0x10000>; > - reg-names = "lpass-lpaif"; > - qcom,adsp = <&adsp>; > - > - #address-cells = <1>; > - #size-cells = <0>; > - > - /* Optional to set different MI2S SD lines */ > - dai@3 { > - reg = <MI2S_QUATERNARY>; > - qcom,playback-sd-lines = <0 1>; > - }; > -}; > - > -2) > - > -#include <dt-bindings/sound/sc7180-lpass.h> > - > -lpass_cpu: lpass { > - compatible = "qcom,sc7180-lpass-cpu"; > - > - reg = <0 0x62F00000 0 0x29000>; > - > - iommus = <&apps_smmu 0x1020 0>; > - > - power-domains = <&lpass_hm LPASS_CORE_HM_GDSCR>; > - clocks = <&gcc GCC_LPASS_CFG_NOC_SWAY_CLK>, > - <&lpasscorecc LPASS_AUDIO_CORE_CORE_CLK>, > - <&lpasscorecc LPASS_AUDIO_CORE_EXT_MCLK0_CLK>, > - <&lpasscorecc LPASS_AUDIO_CORE_SYSNOC_MPORT_CORE_CLK>, > - <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_PRI_IBIT_CLK>, > - <&lpasscorecc LPASS_AUDIO_CORE_LPAIF_SEC_IBIT_CLK>; > - clock-names = "pcnoc-sway-clk", "audio-core", > - "mclk0", "pcnoc-mport-clk", > - "mi2s-bit-clk0", "mi2s-bit-clk1"; > - interrupts = <0 160 IRQ_TYPE_LEVEL_HIGH>; > - interrupt-names = "lpass-irq-lpaif"; > - > - > - #sound-dai-cells = <1>; > - > - #address-cells = <1>; > - #size-cells = <0>; > - > - mi2s-primary@0 { > - reg = <MI2S_PRIMARY>; > - qcom,playback-sd-lines = <1>; > - qcom,capture-sd-lines = <0>; > - }; > - > - mi2s-secondary@1 { > - reg = <MI2S_SECONDARY>; > - qcom,playback-sd-lines = <0>; > - }; > -}; > diff --git a/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml > new file mode 100644 > index 00000000..5c1881d > --- /dev/null > +++ b/Documentation/devicetree/bindings/sound/qcom,lpass-cpu.yaml > @@ -0,0 +1,179 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/sound/qcom,lpass-cpu.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm Technologies Inc. LPASS CPU dai driver bindings > + > +maintainers: > + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > + - Rohit kumar <rohitkr@codeaurora.org> > + > +description: | > + Qualcomm Technologies Inc. SOC Low-Power Audio SubSystem (LPASS) that consist > + of MI2S interface for audio data transfer on external codecs. LPASS cpu driver > + is a module to configure Low-Power Audio Interface(LPAIF) core registers > + across different IP versions. > + > +properties: > + compatible: > + enum: > + - qcom,lpass-cpu > + - qcom,apq8016-lpass-cpu > + - qcom,sc7180-lpass-cpu > + > + reg: > + maxItems: 1 > + description: LPAIF core registers > + > + clocks: > + minItems: 3 > + maxItems: 6 > + > + clock-names: > + minItems: 3 > + maxItems: 6 > + > + interrupts: > + maxItems: 1 > + description: LPAIF DMA buffer interrupt > + > + qcom,adsp: > + $ref: /schemas/types.yaml#/definitions/phandle > + description: Phandle for the audio DSP node > + > + iommus: > + maxItems: 1 > + description: Phandle to apps_smmu node with sid mask > + > + power-domains: > + maxItems: 1 > + > + '#sound-dai-cells': > + const: 1 > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 > + > +patternProperties: > + "(^mi2s-[0-9a-f]$|mi2s)": I believe this will work: "^mi2s(-[0-9a-f])?$" > + type: object > + description: Required properties for each DAI > + > + properties: > + reg: > + maxItems: 1 > + description: Must be one of the DAI ID > + > + required: > + - reg additionalProperties: false > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - interrupts > + - '#sound-dai-cells' > + > +additionalProperties: false > + > +allOf: > + - if: > + properties: > + compatible: > + contains: > + const: qcom,lpass-cpu > + > + then: > + properties: > + clock-names: > + items: > + - const: ahbix-clk > + - const: mi2s-osr-clk > + - const: mi2s-bit-clk > + > + - if: > + properties: > + compatible: > + contains: > + const: qcom,apq8016-lpass-cpu > + > + then: > + properties: > + clock-names: > + items: > + - const: ahbix-clk > + - const: mi2s-bit-clk0 > + - const: mi2s-bit-clk1 > + - const: mi2s-bit-clk2 > + - const: mi2s-bit-clk3 > + - const: pcnoc-mport-clk > + - const: pcnoc-sway-clk > + > + - if: > + properties: > + compatible: > + contains: > + const: qcom,sc7180-lpass-cpu > + > + then: > + properties: > + clock-names: > + items: > + - const: pcnoc-sway-clk > + - const: audio-core > + - const: mclk0 > + - const: pcnoc-mport-clk > + - const: mi2s-bit-clk0 > + - const: mi2s-bit-clk1 > + required: > + - iommus > + - power-domains > + > +examples: > + - | > + #include <dt-bindings/sound/sc7180-lpass.h> > + > + soc { > + #address-cells = <2>; > + #size-cells = <2>; > + lpass@62f00000 { > + compatible = "qcom,sc7180-lpass-cpu"; > + > + reg = <0 0x62f00000 0 0x29000>; > + > + iommus = <&apps_smmu 0x1020 0>; > + power-domains = <&lpass_hm 0>; > + > + clocks = <&gcc 131>, > + <&lpasscorecc 6>, > + <&lpasscorecc 7>, > + <&lpasscorecc 10>, > + <&lpasscorecc 8>, > + <&lpasscorecc 9>; > + > + clock-names = "pcnoc-sway-clk", "audio-core", > + "mclk0", "pcnoc-mport-clk", > + "mi2s-bit-clk0", "mi2s-bit-clk1"; > + > + interrupts = <0 160 1>; > + > + #sound-dai-cells = <1>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + /* Optional to set different MI2S SD lines */ > + mi2s-primary@0 { > + reg = <MI2S_PRIMARY>; > + qcom,playback-sd-lines = <1>; > + qcom,capture-sd-lines = <0>; These 2 aren't documented. Rob
next prev parent reply other threads:[~2020-08-06 17:06 UTC|newest] Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-08-04 8:07 [PATCH v5 00/12] ASoC: qcom: Add support for SC7180 lpass variant Rohit kumar 2020-08-04 8:07 ` [PATCH v5 01/12] ASoC: qcom: Add common array to initialize soc based core clocks Rohit kumar 2020-08-04 8:07 ` Rohit kumar 2020-08-11 10:43 ` Rohit Kumar 2020-08-11 11:34 ` Mark Brown 2020-08-11 11:34 ` Mark Brown 2020-08-04 8:07 ` [PATCH v5 02/12] ASoC: qcom: lpass-cpu: Move ahbix clk to platform specific function Rohit kumar 2020-08-04 8:07 ` [PATCH v5 03/12] ASoC: qcom: lpass-platform: Replace card->dev with component->dev Rohit kumar 2020-08-04 8:07 ` Rohit kumar 2020-08-04 8:07 ` [PATCH v5 04/12] ASoC: qcom: lpass-platform: fix memory leak Rohit kumar 2020-08-04 8:07 ` [PATCH v5 05/12] ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers Rohit kumar 2020-08-04 8:07 ` [PATCH v5 06/12] ASoC: qcom: lpass-cpu: fix concurrency issue Rohit kumar 2020-08-04 8:07 ` [PATCH v5 07/12] dt-bindings: sound: lpass-cpu: Add sc7180 lpass cpu node Rohit kumar 2020-08-06 14:29 ` Rob Herring 2020-08-06 14:29 ` Rob Herring 2020-08-04 8:07 ` [PATCH v5 08/12] include: dt-bindings: sound: Add sc7180-lpass bindings header Rohit kumar 2020-08-04 8:07 ` Rohit kumar 2020-08-04 8:07 ` [PATCH v5 09/12] ASoC: qcom: lpass-sc7180: Add platform driver for lpass audio Rohit kumar 2020-08-04 8:07 ` Rohit kumar 2020-08-04 8:07 ` [PATCH v5 10/12] ASoC: qcom: lpass-cpu: Use platform_get_resource Rohit kumar 2020-08-04 8:07 ` [PATCH v5 11/12] ASoC: qcom: lpass-platform: Use platform_get_irq Rohit kumar 2020-08-04 8:07 ` [PATCH v5 12/12] dt-bindings: sound: lpass-cpu: Move to yaml format Rohit kumar 2020-08-06 14:33 ` Rob Herring [this message] 2020-08-06 14:33 ` Rob Herring 2020-08-06 15:11 ` [PATCH v5 00/12] ASoC: qcom: Add support for SC7180 lpass variant Rohit Kumar
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200806143348.GA807751@bogus \ --to=robh@kernel.org \ --cc=agross@kernel.org \ --cc=alsa-devel@alsa-project.org \ --cc=bgoswami@codeaurora.org \ --cc=bjorn.andersson@linaro.org \ --cc=broonie@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=perex@perex.cz \ --cc=plai@codeaurora.org \ --cc=rohitkr@codeaurora.org \ --cc=srinivas.kandagatla@linaro.org \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.