[PATCH][next] vdpa/mlx5: fix memory allocation failure checks

[PATCH][next] vdpa/mlx5: fix memory allocation failure checks

[Colin King]

From: Colin Ian King <colin.king@canonical.com>

The memory allocation failure checking for in and out is currently
checking if the pointers are valid rather than the contents of what
they point to. Hence the null check on failed memory allocations is
incorrect.  Fix this by adding the missing indirection in the check.
Also for the default case, just set the *in and *out to null as
these don't have any thing allocated to kfree. Finally remove the
redundant *in and *out check as these have been already done on each
allocation in the case statement.

Addresses-Coverity: ("Null pointer dereference")
Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
 drivers/vdpa/mlx5/net/mlx5_vnet.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index 3ec44a4f0e45..55bc58e1dae9 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -867,7 +867,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
 		*outlen = MLX5_ST_SZ_BYTES(qp_2rst_out);
 		*in = kzalloc(*inlen, GFP_KERNEL);
 		*out = kzalloc(*outlen, GFP_KERNEL);
-		if (!in || !out)
+		if (!*in || !*out)
 			goto outerr;
 
 		MLX5_SET(qp_2rst_in, *in, opcode, cmd);
@@ -879,7 +879,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
 		*outlen = MLX5_ST_SZ_BYTES(rst2init_qp_out);
 		*in = kzalloc(*inlen, GFP_KERNEL);
 		*out = kzalloc(MLX5_ST_SZ_BYTES(rst2init_qp_out), GFP_KERNEL);
-		if (!in || !out)
+		if (!*in || !*out)
 			goto outerr;
 
 		MLX5_SET(rst2init_qp_in, *in, opcode, cmd);
@@ -896,7 +896,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
 		*outlen = MLX5_ST_SZ_BYTES(init2rtr_qp_out);
 		*in = kzalloc(*inlen, GFP_KERNEL);
 		*out = kzalloc(MLX5_ST_SZ_BYTES(init2rtr_qp_out), GFP_KERNEL);
-		if (!in || !out)
+		if (!*in || !*out)
 			goto outerr;
 
 		MLX5_SET(init2rtr_qp_in, *in, opcode, cmd);
@@ -914,7 +914,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
 		*outlen = MLX5_ST_SZ_BYTES(rtr2rts_qp_out);
 		*in = kzalloc(*inlen, GFP_KERNEL);
 		*out = kzalloc(MLX5_ST_SZ_BYTES(rtr2rts_qp_out), GFP_KERNEL);
-		if (!in || !out)
+		if (!*in || !*out)
 			goto outerr;
 
 		MLX5_SET(rtr2rts_qp_in, *in, opcode, cmd);
@@ -927,16 +927,15 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
 		MLX5_SET(qpc, qpc, rnr_retry, 7);
 		break;
 	default:
-		goto outerr;
+		goto outerr_nullify;
 	}
-	if (!*in || !*out)
-		goto outerr;
 
 	return;
 
 outerr:
 	kfree(*in);
 	kfree(*out);
+outerr_nullify:
 	*in = NULL;
 	*out = NULL;
 }
-- 
2.27.0

[PATCH][next] vdpa/mlx5: fix memory allocation failure checks

[Colin King]

From: Colin Ian King <colin.king@canonical.com>

The memory allocation failure checking for in and out is currently
checking if the pointers are valid rather than the contents of what
they point to. Hence the null check on failed memory allocations is
incorrect.  Fix this by adding the missing indirection in the check.
Also for the default case, just set the *in and *out to null as
these don't have any thing allocated to kfree. Finally remove the
redundant *in and *out check as these have been already done on each
allocation in the case statement.

Addresses-Coverity: ("Null pointer dereference")
Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
 drivers/vdpa/mlx5/net/mlx5_vnet.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index 3ec44a4f0e45..55bc58e1dae9 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -867,7 +867,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
 		*outlen = MLX5_ST_SZ_BYTES(qp_2rst_out);
 		*in = kzalloc(*inlen, GFP_KERNEL);
 		*out = kzalloc(*outlen, GFP_KERNEL);
-		if (!in || !out)
+		if (!*in || !*out)
 			goto outerr;
 
 		MLX5_SET(qp_2rst_in, *in, opcode, cmd);
@@ -879,7 +879,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
 		*outlen = MLX5_ST_SZ_BYTES(rst2init_qp_out);
 		*in = kzalloc(*inlen, GFP_KERNEL);
 		*out = kzalloc(MLX5_ST_SZ_BYTES(rst2init_qp_out), GFP_KERNEL);
-		if (!in || !out)
+		if (!*in || !*out)
 			goto outerr;
 
 		MLX5_SET(rst2init_qp_in, *in, opcode, cmd);
@@ -896,7 +896,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
 		*outlen = MLX5_ST_SZ_BYTES(init2rtr_qp_out);
 		*in = kzalloc(*inlen, GFP_KERNEL);
 		*out = kzalloc(MLX5_ST_SZ_BYTES(init2rtr_qp_out), GFP_KERNEL);
-		if (!in || !out)
+		if (!*in || !*out)
 			goto outerr;
 
 		MLX5_SET(init2rtr_qp_in, *in, opcode, cmd);
@@ -914,7 +914,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
 		*outlen = MLX5_ST_SZ_BYTES(rtr2rts_qp_out);
 		*in = kzalloc(*inlen, GFP_KERNEL);
 		*out = kzalloc(MLX5_ST_SZ_BYTES(rtr2rts_qp_out), GFP_KERNEL);
-		if (!in || !out)
+		if (!*in || !*out)
 			goto outerr;
 
 		MLX5_SET(rtr2rts_qp_in, *in, opcode, cmd);
@@ -927,16 +927,15 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
 		MLX5_SET(qpc, qpc, rnr_retry, 7);
 		break;
 	default:
-		goto outerr;
+		goto outerr_nullify;
 	}
-	if (!*in || !*out)
-		goto outerr;
 
 	return;
 
 outerr:
 	kfree(*in);
 	kfree(*out);
+outerr_nullify:
 	*in = NULL;
 	*out = NULL;
 }
-- 
2.27.0

[PATCH][next] vdpa/mlx5: fix memory allocation failure checks

[Colin King]

From: Colin Ian King <colin.king@canonical.com>

The memory allocation failure checking for in and out is currently
checking if the pointers are valid rather than the contents of what
they point to. Hence the null check on failed memory allocations is
incorrect.  Fix this by adding the missing indirection in the check.
Also for the default case, just set the *in and *out to null as
these don't have any thing allocated to kfree. Finally remove the
redundant *in and *out check as these have been already done on each
allocation in the case statement.

Addresses-Coverity: ("Null pointer dereference")
Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
 drivers/vdpa/mlx5/net/mlx5_vnet.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
index 3ec44a4f0e45..55bc58e1dae9 100644
--- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
+++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
@@ -867,7 +867,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
 		*outlen = MLX5_ST_SZ_BYTES(qp_2rst_out);
 		*in = kzalloc(*inlen, GFP_KERNEL);
 		*out = kzalloc(*outlen, GFP_KERNEL);
-		if (!in || !out)
+		if (!*in || !*out)
 			goto outerr;
 
 		MLX5_SET(qp_2rst_in, *in, opcode, cmd);
@@ -879,7 +879,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
 		*outlen = MLX5_ST_SZ_BYTES(rst2init_qp_out);
 		*in = kzalloc(*inlen, GFP_KERNEL);
 		*out = kzalloc(MLX5_ST_SZ_BYTES(rst2init_qp_out), GFP_KERNEL);
-		if (!in || !out)
+		if (!*in || !*out)
 			goto outerr;
 
 		MLX5_SET(rst2init_qp_in, *in, opcode, cmd);
@@ -896,7 +896,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
 		*outlen = MLX5_ST_SZ_BYTES(init2rtr_qp_out);
 		*in = kzalloc(*inlen, GFP_KERNEL);
 		*out = kzalloc(MLX5_ST_SZ_BYTES(init2rtr_qp_out), GFP_KERNEL);
-		if (!in || !out)
+		if (!*in || !*out)
 			goto outerr;
 
 		MLX5_SET(init2rtr_qp_in, *in, opcode, cmd);
@@ -914,7 +914,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
 		*outlen = MLX5_ST_SZ_BYTES(rtr2rts_qp_out);
 		*in = kzalloc(*inlen, GFP_KERNEL);
 		*out = kzalloc(MLX5_ST_SZ_BYTES(rtr2rts_qp_out), GFP_KERNEL);
-		if (!in || !out)
+		if (!*in || !*out)
 			goto outerr;
 
 		MLX5_SET(rtr2rts_qp_in, *in, opcode, cmd);
@@ -927,16 +927,15 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
 		MLX5_SET(qpc, qpc, rnr_retry, 7);
 		break;
 	default:
-		goto outerr;
+		goto outerr_nullify;
 	}
-	if (!*in || !*out)
-		goto outerr;
 
 	return;
 
 outerr:
 	kfree(*in);
 	kfree(*out);
+outerr_nullify:
 	*in = NULL;
 	*out = NULL;
 }
-- 
2.27.0

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

Re: [PATCH][next] vdpa/mlx5: fix memory allocation failure checks

[Jason Wang]

On 2020/8/7 上午12:08, Colin King wrote:
> From: Colin Ian King <colin.king@canonical.com>
>
> The memory allocation failure checking for in and out is currently
> checking if the pointers are valid rather than the contents of what
> they point to. Hence the null check on failed memory allocations is
> incorrect.  Fix this by adding the missing indirection in the check.
> Also for the default case, just set the *in and *out to null as
> these don't have any thing allocated to kfree. Finally remove the
> redundant *in and *out check as these have been already done on each
> allocation in the case statement.
>
> Addresses-Coverity: ("Null pointer dereference")
> Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
> Signed-off-by: Colin Ian King <colin.king@canonical.com>


Acked-by: Jason Wang <jasowang@redhat.com>


> ---
>   drivers/vdpa/mlx5/net/mlx5_vnet.c | 13 ++++++-------
>   1 file changed, 6 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> index 3ec44a4f0e45..55bc58e1dae9 100644
> --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
> +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> @@ -867,7 +867,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>   		*outlen = MLX5_ST_SZ_BYTES(qp_2rst_out);
>   		*in = kzalloc(*inlen, GFP_KERNEL);
>   		*out = kzalloc(*outlen, GFP_KERNEL);
> -		if (!in || !out)
> +		if (!*in || !*out)
>   			goto outerr;
>   
>   		MLX5_SET(qp_2rst_in, *in, opcode, cmd);
> @@ -879,7 +879,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>   		*outlen = MLX5_ST_SZ_BYTES(rst2init_qp_out);
>   		*in = kzalloc(*inlen, GFP_KERNEL);
>   		*out = kzalloc(MLX5_ST_SZ_BYTES(rst2init_qp_out), GFP_KERNEL);
> -		if (!in || !out)
> +		if (!*in || !*out)
>   			goto outerr;
>   
>   		MLX5_SET(rst2init_qp_in, *in, opcode, cmd);
> @@ -896,7 +896,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>   		*outlen = MLX5_ST_SZ_BYTES(init2rtr_qp_out);
>   		*in = kzalloc(*inlen, GFP_KERNEL);
>   		*out = kzalloc(MLX5_ST_SZ_BYTES(init2rtr_qp_out), GFP_KERNEL);
> -		if (!in || !out)
> +		if (!*in || !*out)
>   			goto outerr;
>   
>   		MLX5_SET(init2rtr_qp_in, *in, opcode, cmd);
> @@ -914,7 +914,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>   		*outlen = MLX5_ST_SZ_BYTES(rtr2rts_qp_out);
>   		*in = kzalloc(*inlen, GFP_KERNEL);
>   		*out = kzalloc(MLX5_ST_SZ_BYTES(rtr2rts_qp_out), GFP_KERNEL);
> -		if (!in || !out)
> +		if (!*in || !*out)
>   			goto outerr;
>   
>   		MLX5_SET(rtr2rts_qp_in, *in, opcode, cmd);
> @@ -927,16 +927,15 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>   		MLX5_SET(qpc, qpc, rnr_retry, 7);
>   		break;
>   	default:
> -		goto outerr;
> +		goto outerr_nullify;
>   	}
> -	if (!*in || !*out)
> -		goto outerr;
>   
>   	return;
>   
>   outerr:
>   	kfree(*in);
>   	kfree(*out);
> +outerr_nullify:
>   	*in = NULL;
>   	*out = NULL;
>   }

Re: [PATCH][next] vdpa/mlx5: fix memory allocation failure checks

[Jason Wang]

On 2020/8/7 上午12:08, Colin King wrote:
> From: Colin Ian King <colin.king@canonical.com>
>
> The memory allocation failure checking for in and out is currently
> checking if the pointers are valid rather than the contents of what
> they point to. Hence the null check on failed memory allocations is
> incorrect.  Fix this by adding the missing indirection in the check.
> Also for the default case, just set the *in and *out to null as
> these don't have any thing allocated to kfree. Finally remove the
> redundant *in and *out check as these have been already done on each
> allocation in the case statement.
>
> Addresses-Coverity: ("Null pointer dereference")
> Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
> Signed-off-by: Colin Ian King <colin.king@canonical.com>


Acked-by: Jason Wang <jasowang@redhat.com>


> ---
>   drivers/vdpa/mlx5/net/mlx5_vnet.c | 13 ++++++-------
>   1 file changed, 6 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> index 3ec44a4f0e45..55bc58e1dae9 100644
> --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
> +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> @@ -867,7 +867,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>   		*outlen = MLX5_ST_SZ_BYTES(qp_2rst_out);
>   		*in = kzalloc(*inlen, GFP_KERNEL);
>   		*out = kzalloc(*outlen, GFP_KERNEL);
> -		if (!in || !out)
> +		if (!*in || !*out)
>   			goto outerr;
>   
>   		MLX5_SET(qp_2rst_in, *in, opcode, cmd);
> @@ -879,7 +879,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>   		*outlen = MLX5_ST_SZ_BYTES(rst2init_qp_out);
>   		*in = kzalloc(*inlen, GFP_KERNEL);
>   		*out = kzalloc(MLX5_ST_SZ_BYTES(rst2init_qp_out), GFP_KERNEL);
> -		if (!in || !out)
> +		if (!*in || !*out)
>   			goto outerr;
>   
>   		MLX5_SET(rst2init_qp_in, *in, opcode, cmd);
> @@ -896,7 +896,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>   		*outlen = MLX5_ST_SZ_BYTES(init2rtr_qp_out);
>   		*in = kzalloc(*inlen, GFP_KERNEL);
>   		*out = kzalloc(MLX5_ST_SZ_BYTES(init2rtr_qp_out), GFP_KERNEL);
> -		if (!in || !out)
> +		if (!*in || !*out)
>   			goto outerr;
>   
>   		MLX5_SET(init2rtr_qp_in, *in, opcode, cmd);
> @@ -914,7 +914,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>   		*outlen = MLX5_ST_SZ_BYTES(rtr2rts_qp_out);
>   		*in = kzalloc(*inlen, GFP_KERNEL);
>   		*out = kzalloc(MLX5_ST_SZ_BYTES(rtr2rts_qp_out), GFP_KERNEL);
> -		if (!in || !out)
> +		if (!*in || !*out)
>   			goto outerr;
>   
>   		MLX5_SET(rtr2rts_qp_in, *in, opcode, cmd);
> @@ -927,16 +927,15 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>   		MLX5_SET(qpc, qpc, rnr_retry, 7);
>   		break;
>   	default:
> -		goto outerr;
> +		goto outerr_nullify;
>   	}
> -	if (!*in || !*out)
> -		goto outerr;
>   
>   	return;
>   
>   outerr:
>   	kfree(*in);
>   	kfree(*out);
> +outerr_nullify:
>   	*in = NULL;
>   	*out = NULL;
>   }

Re: [PATCH][next] vdpa/mlx5: fix memory allocation failure checks

[Jason Wang]

On 2020/8/7 上午12:08, Colin King wrote:
> From: Colin Ian King <colin.king@canonical.com>
>
> The memory allocation failure checking for in and out is currently
> checking if the pointers are valid rather than the contents of what
> they point to. Hence the null check on failed memory allocations is
> incorrect.  Fix this by adding the missing indirection in the check.
> Also for the default case, just set the *in and *out to null as
> these don't have any thing allocated to kfree. Finally remove the
> redundant *in and *out check as these have been already done on each
> allocation in the case statement.
>
> Addresses-Coverity: ("Null pointer dereference")
> Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
> Signed-off-by: Colin Ian King <colin.king@canonical.com>


Acked-by: Jason Wang <jasowang@redhat.com>


> ---
>   drivers/vdpa/mlx5/net/mlx5_vnet.c | 13 ++++++-------
>   1 file changed, 6 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> index 3ec44a4f0e45..55bc58e1dae9 100644
> --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
> +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> @@ -867,7 +867,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>   		*outlen = MLX5_ST_SZ_BYTES(qp_2rst_out);
>   		*in = kzalloc(*inlen, GFP_KERNEL);
>   		*out = kzalloc(*outlen, GFP_KERNEL);
> -		if (!in || !out)
> +		if (!*in || !*out)
>   			goto outerr;
>   
>   		MLX5_SET(qp_2rst_in, *in, opcode, cmd);
> @@ -879,7 +879,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>   		*outlen = MLX5_ST_SZ_BYTES(rst2init_qp_out);
>   		*in = kzalloc(*inlen, GFP_KERNEL);
>   		*out = kzalloc(MLX5_ST_SZ_BYTES(rst2init_qp_out), GFP_KERNEL);
> -		if (!in || !out)
> +		if (!*in || !*out)
>   			goto outerr;
>   
>   		MLX5_SET(rst2init_qp_in, *in, opcode, cmd);
> @@ -896,7 +896,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>   		*outlen = MLX5_ST_SZ_BYTES(init2rtr_qp_out);
>   		*in = kzalloc(*inlen, GFP_KERNEL);
>   		*out = kzalloc(MLX5_ST_SZ_BYTES(init2rtr_qp_out), GFP_KERNEL);
> -		if (!in || !out)
> +		if (!*in || !*out)
>   			goto outerr;
>   
>   		MLX5_SET(init2rtr_qp_in, *in, opcode, cmd);
> @@ -914,7 +914,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>   		*outlen = MLX5_ST_SZ_BYTES(rtr2rts_qp_out);
>   		*in = kzalloc(*inlen, GFP_KERNEL);
>   		*out = kzalloc(MLX5_ST_SZ_BYTES(rtr2rts_qp_out), GFP_KERNEL);
> -		if (!in || !out)
> +		if (!*in || !*out)
>   			goto outerr;
>   
>   		MLX5_SET(rtr2rts_qp_in, *in, opcode, cmd);
> @@ -927,16 +927,15 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>   		MLX5_SET(qpc, qpc, rnr_retry, 7);
>   		break;
>   	default:
> -		goto outerr;
> +		goto outerr_nullify;
>   	}
> -	if (!*in || !*out)
> -		goto outerr;
>   
>   	return;
>   
>   outerr:
>   	kfree(*in);
>   	kfree(*out);
> +outerr_nullify:
>   	*in = NULL;
>   	*out = NULL;
>   }

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

Re: [PATCH][next] vdpa/mlx5: fix memory allocation failure checks

[Eli Cohen]

On Thu, Aug 06, 2020 at 05:08:28PM +0100, Colin King wrote:
Acked by: Eli Cohen <eli@mellanox.com>

> From: Colin Ian King <colin.king@canonical.com>
> 
> The memory allocation failure checking for in and out is currently
> checking if the pointers are valid rather than the contents of what
> they point to. Hence the null check on failed memory allocations is
> incorrect.  Fix this by adding the missing indirection in the check.
> Also for the default case, just set the *in and *out to null as
> these don't have any thing allocated to kfree. Finally remove the
> redundant *in and *out check as these have been already done on each
> allocation in the case statement.
> 
> Addresses-Coverity: ("Null pointer dereference")
> Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
> Signed-off-by: Colin Ian King <colin.king@canonical.com>
> ---
>  drivers/vdpa/mlx5/net/mlx5_vnet.c | 13 ++++++-------
>  1 file changed, 6 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> index 3ec44a4f0e45..55bc58e1dae9 100644
> --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
> +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> @@ -867,7 +867,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>  		*outlen = MLX5_ST_SZ_BYTES(qp_2rst_out);
>  		*in = kzalloc(*inlen, GFP_KERNEL);
>  		*out = kzalloc(*outlen, GFP_KERNEL);
> -		if (!in || !out)
> +		if (!*in || !*out)
>  			goto outerr;
>  
>  		MLX5_SET(qp_2rst_in, *in, opcode, cmd);
> @@ -879,7 +879,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>  		*outlen = MLX5_ST_SZ_BYTES(rst2init_qp_out);
>  		*in = kzalloc(*inlen, GFP_KERNEL);
>  		*out = kzalloc(MLX5_ST_SZ_BYTES(rst2init_qp_out), GFP_KERNEL);
> -		if (!in || !out)
> +		if (!*in || !*out)
>  			goto outerr;
>  
>  		MLX5_SET(rst2init_qp_in, *in, opcode, cmd);
> @@ -896,7 +896,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>  		*outlen = MLX5_ST_SZ_BYTES(init2rtr_qp_out);
>  		*in = kzalloc(*inlen, GFP_KERNEL);
>  		*out = kzalloc(MLX5_ST_SZ_BYTES(init2rtr_qp_out), GFP_KERNEL);
> -		if (!in || !out)
> +		if (!*in || !*out)
>  			goto outerr;
>  
>  		MLX5_SET(init2rtr_qp_in, *in, opcode, cmd);
> @@ -914,7 +914,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>  		*outlen = MLX5_ST_SZ_BYTES(rtr2rts_qp_out);
>  		*in = kzalloc(*inlen, GFP_KERNEL);
>  		*out = kzalloc(MLX5_ST_SZ_BYTES(rtr2rts_qp_out), GFP_KERNEL);
> -		if (!in || !out)
> +		if (!*in || !*out)
>  			goto outerr;
>  
>  		MLX5_SET(rtr2rts_qp_in, *in, opcode, cmd);
> @@ -927,16 +927,15 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>  		MLX5_SET(qpc, qpc, rnr_retry, 7);
>  		break;
>  	default:
> -		goto outerr;
> +		goto outerr_nullify;
>  	}
> -	if (!*in || !*out)
> -		goto outerr;
>  
>  	return;
>  
>  outerr:
>  	kfree(*in);
>  	kfree(*out);
> +outerr_nullify:
>  	*in = NULL;
>  	*out = NULL;
>  }
> -- 
> 2.27.0
> 

Re: [PATCH][next] vdpa/mlx5: fix memory allocation failure checks

[Eli Cohen]

On Thu, Aug 06, 2020 at 05:08:28PM +0100, Colin King wrote:
Acked by: Eli Cohen <eli@mellanox.com>

> From: Colin Ian King <colin.king@canonical.com>
> 
> The memory allocation failure checking for in and out is currently
> checking if the pointers are valid rather than the contents of what
> they point to. Hence the null check on failed memory allocations is
> incorrect.  Fix this by adding the missing indirection in the check.
> Also for the default case, just set the *in and *out to null as
> these don't have any thing allocated to kfree. Finally remove the
> redundant *in and *out check as these have been already done on each
> allocation in the case statement.
> 
> Addresses-Coverity: ("Null pointer dereference")
> Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
> Signed-off-by: Colin Ian King <colin.king@canonical.com>
> ---
>  drivers/vdpa/mlx5/net/mlx5_vnet.c | 13 ++++++-------
>  1 file changed, 6 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/vdpa/mlx5/net/mlx5_vnet.c b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> index 3ec44a4f0e45..55bc58e1dae9 100644
> --- a/drivers/vdpa/mlx5/net/mlx5_vnet.c
> +++ b/drivers/vdpa/mlx5/net/mlx5_vnet.c
> @@ -867,7 +867,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>  		*outlen = MLX5_ST_SZ_BYTES(qp_2rst_out);
>  		*in = kzalloc(*inlen, GFP_KERNEL);
>  		*out = kzalloc(*outlen, GFP_KERNEL);
> -		if (!in || !out)
> +		if (!*in || !*out)
>  			goto outerr;
>  
>  		MLX5_SET(qp_2rst_in, *in, opcode, cmd);
> @@ -879,7 +879,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>  		*outlen = MLX5_ST_SZ_BYTES(rst2init_qp_out);
>  		*in = kzalloc(*inlen, GFP_KERNEL);
>  		*out = kzalloc(MLX5_ST_SZ_BYTES(rst2init_qp_out), GFP_KERNEL);
> -		if (!in || !out)
> +		if (!*in || !*out)
>  			goto outerr;
>  
>  		MLX5_SET(rst2init_qp_in, *in, opcode, cmd);
> @@ -896,7 +896,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>  		*outlen = MLX5_ST_SZ_BYTES(init2rtr_qp_out);
>  		*in = kzalloc(*inlen, GFP_KERNEL);
>  		*out = kzalloc(MLX5_ST_SZ_BYTES(init2rtr_qp_out), GFP_KERNEL);
> -		if (!in || !out)
> +		if (!*in || !*out)
>  			goto outerr;
>  
>  		MLX5_SET(init2rtr_qp_in, *in, opcode, cmd);
> @@ -914,7 +914,7 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>  		*outlen = MLX5_ST_SZ_BYTES(rtr2rts_qp_out);
>  		*in = kzalloc(*inlen, GFP_KERNEL);
>  		*out = kzalloc(MLX5_ST_SZ_BYTES(rtr2rts_qp_out), GFP_KERNEL);
> -		if (!in || !out)
> +		if (!*in || !*out)
>  			goto outerr;
>  
>  		MLX5_SET(rtr2rts_qp_in, *in, opcode, cmd);
> @@ -927,16 +927,15 @@ static void alloc_inout(struct mlx5_vdpa_net *ndev, int cmd, void **in, int *inl
>  		MLX5_SET(qpc, qpc, rnr_retry, 7);
>  		break;
>  	default:
> -		goto outerr;
> +		goto outerr_nullify;
>  	}
> -	if (!*in || !*out)
> -		goto outerr;
>  
>  	return;
>  
>  outerr:
>  	kfree(*in);
>  	kfree(*out);
> +outerr_nullify:
>  	*in = NULL;
>  	*out = NULL;
>  }
> -- 
> 2.27.0
> 

Re: [PATCH][next] vdpa/mlx5: fix memory allocation failure checks

[Michael S. Tsirkin]

On Sun, Aug 09, 2020 at 09:03:47AM +0300, Eli Cohen wrote:
> On Thu, Aug 06, 2020 at 05:08:28PM +0100, Colin King wrote:
> Acked by: Eli Cohen <eli@mellanox.com>

That should be Acked-by: (with a dash).

Re: [PATCH][next] vdpa/mlx5: fix memory allocation failure checks

[Michael S. Tsirkin]

On Sun, Aug 09, 2020 at 09:03:47AM +0300, Eli Cohen wrote:
> On Thu, Aug 06, 2020 at 05:08:28PM +0100, Colin King wrote:
> Acked by: Eli Cohen <eli@mellanox.com>

That should be Acked-by: (with a dash).

Re: [PATCH][next] vdpa/mlx5: fix memory allocation failure checks

[Michael S. Tsirkin]

On Sun, Aug 09, 2020 at 09:03:47AM +0300, Eli Cohen wrote:
> On Thu, Aug 06, 2020 at 05:08:28PM +0100, Colin King wrote:
> Acked by: Eli Cohen <eli@mellanox.com>

That should be Acked-by: (with a dash).

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization