All of lore.kernel.org
 help / color / mirror / Atom feed
* [PATCH] drm/gma500: fix spelling mistake "pannel" -> "panel"
@ 2020-08-05 12:42 ` Colin King
  0 siblings, 0 replies; 6+ messages in thread
From: Colin King @ 2020-08-05 12:42 UTC (permalink / raw)
  To: Patrik Jakobsson, David Airlie, Daniel Vetter, dri-devel
  Cc: kernel-janitors, linux-kernel

From: Colin Ian King <colin.king@canonical.com>

There a handful of spelling mistakes. fix them.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
 drivers/gpu/drm/gma500/mdfld_dsi_output.c | 4 ++--
 drivers/gpu/drm/gma500/psb_intel_sdvo.c   | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_output.c b/drivers/gpu/drm/gma500/mdfld_dsi_output.c
index f350ac1ead18..2f3486f32fed 100644
--- a/drivers/gpu/drm/gma500/mdfld_dsi_output.c
+++ b/drivers/gpu/drm/gma500/mdfld_dsi_output.c
@@ -366,7 +366,7 @@ static enum drm_mode_status mdfld_dsi_connector_mode_valid(struct drm_connector
 	/**
 	 * FIXME: current DC has no fitting unit, reject any mode setting
 	 * request
-	 * Will figure out a way to do up-scaling(pannel fitting) later.
+	 * Will figure out a way to do up-scaling(panel fitting) later.
 	 **/
 	if (fixed_mode) {
 		if (mode->hdisplay != fixed_mode->hdisplay)
@@ -531,7 +531,7 @@ void mdfld_dsi_output_init(struct drm_device *dev,
 	dsi_config->connector = dsi_connector;
 
 	if (!dsi_config->fixed_mode) {
-		DRM_ERROR("No pannel fixed mode was found\n");
+		DRM_ERROR("No panel fixed mode was found\n");
 		goto dsi_init_err0;
 	}
 
diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo.c b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
index 06e44f47e73e..907f966d6f22 100644
--- a/drivers/gpu/drm/gma500/psb_intel_sdvo.c
+++ b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
@@ -125,7 +125,7 @@ struct psb_intel_sdvo {
 	bool is_lvds;
 
 	/**
-	 * This is sdvo fixed pannel mode pointer
+	 * This is sdvo fixed panel mode pointer
 	 */
 	struct drm_display_mode *sdvo_lvds_fixed_mode;
 
-- 
2.27.0


^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH] drm/gma500: fix spelling mistake "pannel" -> "panel"
@ 2020-08-05 12:42 ` Colin King
  0 siblings, 0 replies; 6+ messages in thread
From: Colin King @ 2020-08-05 12:42 UTC (permalink / raw)
  To: Patrik Jakobsson, David Airlie, Daniel Vetter, dri-devel
  Cc: kernel-janitors, linux-kernel

From: Colin Ian King <colin.king@canonical.com>

There a handful of spelling mistakes. fix them.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
 drivers/gpu/drm/gma500/mdfld_dsi_output.c | 4 ++--
 drivers/gpu/drm/gma500/psb_intel_sdvo.c   | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_output.c b/drivers/gpu/drm/gma500/mdfld_dsi_output.c
index f350ac1ead18..2f3486f32fed 100644
--- a/drivers/gpu/drm/gma500/mdfld_dsi_output.c
+++ b/drivers/gpu/drm/gma500/mdfld_dsi_output.c
@@ -366,7 +366,7 @@ static enum drm_mode_status mdfld_dsi_connector_mode_valid(struct drm_connector
 	/**
 	 * FIXME: current DC has no fitting unit, reject any mode setting
 	 * request
-	 * Will figure out a way to do up-scaling(pannel fitting) later.
+	 * Will figure out a way to do up-scaling(panel fitting) later.
 	 **/
 	if (fixed_mode) {
 		if (mode->hdisplay != fixed_mode->hdisplay)
@@ -531,7 +531,7 @@ void mdfld_dsi_output_init(struct drm_device *dev,
 	dsi_config->connector = dsi_connector;
 
 	if (!dsi_config->fixed_mode) {
-		DRM_ERROR("No pannel fixed mode was found\n");
+		DRM_ERROR("No panel fixed mode was found\n");
 		goto dsi_init_err0;
 	}
 
diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo.c b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
index 06e44f47e73e..907f966d6f22 100644
--- a/drivers/gpu/drm/gma500/psb_intel_sdvo.c
+++ b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
@@ -125,7 +125,7 @@ struct psb_intel_sdvo {
 	bool is_lvds;
 
 	/**
-	 * This is sdvo fixed pannel mode pointer
+	 * This is sdvo fixed panel mode pointer
 	 */
 	struct drm_display_mode *sdvo_lvds_fixed_mode;
 
-- 
2.27.0

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* [PATCH] drm/gma500: fix spelling mistake "pannel" -> "panel"
@ 2020-08-05 12:42 ` Colin King
  0 siblings, 0 replies; 6+ messages in thread
From: Colin King @ 2020-08-05 12:42 UTC (permalink / raw)
  To: Patrik Jakobsson, David Airlie, Daniel Vetter, dri-devel
  Cc: kernel-janitors, linux-kernel

From: Colin Ian King <colin.king@canonical.com>

There a handful of spelling mistakes. fix them.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
 drivers/gpu/drm/gma500/mdfld_dsi_output.c | 4 ++--
 drivers/gpu/drm/gma500/psb_intel_sdvo.c   | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_output.c b/drivers/gpu/drm/gma500/mdfld_dsi_output.c
index f350ac1ead18..2f3486f32fed 100644
--- a/drivers/gpu/drm/gma500/mdfld_dsi_output.c
+++ b/drivers/gpu/drm/gma500/mdfld_dsi_output.c
@@ -366,7 +366,7 @@ static enum drm_mode_status mdfld_dsi_connector_mode_valid(struct drm_connector
 	/**
 	 * FIXME: current DC has no fitting unit, reject any mode setting
 	 * request
-	 * Will figure out a way to do up-scaling(pannel fitting) later.
+	 * Will figure out a way to do up-scaling(panel fitting) later.
 	 **/
 	if (fixed_mode) {
 		if (mode->hdisplay != fixed_mode->hdisplay)
@@ -531,7 +531,7 @@ void mdfld_dsi_output_init(struct drm_device *dev,
 	dsi_config->connector = dsi_connector;
 
 	if (!dsi_config->fixed_mode) {
-		DRM_ERROR("No pannel fixed mode was found\n");
+		DRM_ERROR("No panel fixed mode was found\n");
 		goto dsi_init_err0;
 	}
 
diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo.c b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
index 06e44f47e73e..907f966d6f22 100644
--- a/drivers/gpu/drm/gma500/psb_intel_sdvo.c
+++ b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
@@ -125,7 +125,7 @@ struct psb_intel_sdvo {
 	bool is_lvds;
 
 	/**
-	 * This is sdvo fixed pannel mode pointer
+	 * This is sdvo fixed panel mode pointer
 	 */
 	struct drm_display_mode *sdvo_lvds_fixed_mode;
 
-- 
2.27.0

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 6+ messages in thread
* Re: [PATCH] drm/gma500: fix spelling mistake "pannel" -> "panel"
  2020-08-05 12:42 ` Colin King
  (?)
@ 2020-08-07  8:53   ` daniel
  -1 siblings, 0 replies; 6+ messages in thread
From: daniel @ 2020-08-07  8:53 UTC (permalink / raw)
  Cc: Patrik Jakobsson, David Airlie, Daniel Vetter, dri-devel,
	kernel-janitors, linux-kernel

On Wed, Aug 05, 2020 at 01:42:27PM +0100, Colin King wrote:
> From: Colin Ian King <colin.king@canonical.com>
> 
> There a handful of spelling mistakes. fix them.
> 
> Signed-off-by: Colin Ian King <colin.king@canonical.com>

Queued up for 5.10, should show up in linux-next right after the merge
window closes.
-Daniel

> ---
>  drivers/gpu/drm/gma500/mdfld_dsi_output.c | 4 ++--
>  drivers/gpu/drm/gma500/psb_intel_sdvo.c   | 2 +-
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_output.c b/drivers/gpu/drm/gma500/mdfld_dsi_output.c
> index f350ac1ead18..2f3486f32fed 100644
> --- a/drivers/gpu/drm/gma500/mdfld_dsi_output.c
> +++ b/drivers/gpu/drm/gma500/mdfld_dsi_output.c
> @@ -366,7 +366,7 @@ static enum drm_mode_status mdfld_dsi_connector_mode_valid(struct drm_connector
>  	/**
>  	 * FIXME: current DC has no fitting unit, reject any mode setting
>  	 * request
> -	 * Will figure out a way to do up-scaling(pannel fitting) later.
> +	 * Will figure out a way to do up-scaling(panel fitting) later.
>  	 **/
>  	if (fixed_mode) {
>  		if (mode->hdisplay != fixed_mode->hdisplay)
> @@ -531,7 +531,7 @@ void mdfld_dsi_output_init(struct drm_device *dev,
>  	dsi_config->connector = dsi_connector;
>  
>  	if (!dsi_config->fixed_mode) {
> -		DRM_ERROR("No pannel fixed mode was found\n");
> +		DRM_ERROR("No panel fixed mode was found\n");
>  		goto dsi_init_err0;
>  	}
>  
> diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo.c b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> index 06e44f47e73e..907f966d6f22 100644
> --- a/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> +++ b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> @@ -125,7 +125,7 @@ struct psb_intel_sdvo {
>  	bool is_lvds;
>  
>  	/**
> -	 * This is sdvo fixed pannel mode pointer
> +	 * This is sdvo fixed panel mode pointer
>  	 */
>  	struct drm_display_mode *sdvo_lvds_fixed_mode;
>  
> -- 
> 2.27.0
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: [PATCH] drm/gma500: fix spelling mistake "pannel" -> "panel"
@ 2020-08-07  8:53   ` daniel
  0 siblings, 0 replies; 6+ messages in thread
From: daniel @ 2020-08-07  8:53 UTC (permalink / raw)
  Cc: David Airlie, kernel-janitors, linux-kernel, dri-devel

On Wed, Aug 05, 2020 at 01:42:27PM +0100, Colin King wrote:
> From: Colin Ian King <colin.king@canonical.com>
> 
> There a handful of spelling mistakes. fix them.
> 
> Signed-off-by: Colin Ian King <colin.king@canonical.com>

Queued up for 5.10, should show up in linux-next right after the merge
window closes.
-Daniel

> ---
>  drivers/gpu/drm/gma500/mdfld_dsi_output.c | 4 ++--
>  drivers/gpu/drm/gma500/psb_intel_sdvo.c   | 2 +-
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_output.c b/drivers/gpu/drm/gma500/mdfld_dsi_output.c
> index f350ac1ead18..2f3486f32fed 100644
> --- a/drivers/gpu/drm/gma500/mdfld_dsi_output.c
> +++ b/drivers/gpu/drm/gma500/mdfld_dsi_output.c
> @@ -366,7 +366,7 @@ static enum drm_mode_status mdfld_dsi_connector_mode_valid(struct drm_connector
>  	/**
>  	 * FIXME: current DC has no fitting unit, reject any mode setting
>  	 * request
> -	 * Will figure out a way to do up-scaling(pannel fitting) later.
> +	 * Will figure out a way to do up-scaling(panel fitting) later.
>  	 **/
>  	if (fixed_mode) {
>  		if (mode->hdisplay != fixed_mode->hdisplay)
> @@ -531,7 +531,7 @@ void mdfld_dsi_output_init(struct drm_device *dev,
>  	dsi_config->connector = dsi_connector;
>  
>  	if (!dsi_config->fixed_mode) {
> -		DRM_ERROR("No pannel fixed mode was found\n");
> +		DRM_ERROR("No panel fixed mode was found\n");
>  		goto dsi_init_err0;
>  	}
>  
> diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo.c b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> index 06e44f47e73e..907f966d6f22 100644
> --- a/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> +++ b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> @@ -125,7 +125,7 @@ struct psb_intel_sdvo {
>  	bool is_lvds;
>  
>  	/**
> -	 * This is sdvo fixed pannel mode pointer
> +	 * This is sdvo fixed panel mode pointer
>  	 */
>  	struct drm_display_mode *sdvo_lvds_fixed_mode;
>  
> -- 
> 2.27.0
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: [PATCH] drm/gma500: fix spelling mistake "pannel" -> "panel"
@ 2020-08-07  8:53   ` daniel
  0 siblings, 0 replies; 6+ messages in thread
From: daniel @ 2020-08-07  8:53 UTC (permalink / raw)
  Cc: David Airlie, kernel-janitors, linux-kernel, dri-devel

On Wed, Aug 05, 2020 at 01:42:27PM +0100, Colin King wrote:
> From: Colin Ian King <colin.king@canonical.com>
> 
> There a handful of spelling mistakes. fix them.
> 
> Signed-off-by: Colin Ian King <colin.king@canonical.com>

Queued up for 5.10, should show up in linux-next right after the merge
window closes.
-Daniel

> ---
>  drivers/gpu/drm/gma500/mdfld_dsi_output.c | 4 ++--
>  drivers/gpu/drm/gma500/psb_intel_sdvo.c   | 2 +-
>  2 files changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/gma500/mdfld_dsi_output.c b/drivers/gpu/drm/gma500/mdfld_dsi_output.c
> index f350ac1ead18..2f3486f32fed 100644
> --- a/drivers/gpu/drm/gma500/mdfld_dsi_output.c
> +++ b/drivers/gpu/drm/gma500/mdfld_dsi_output.c
> @@ -366,7 +366,7 @@ static enum drm_mode_status mdfld_dsi_connector_mode_valid(struct drm_connector
>  	/**
>  	 * FIXME: current DC has no fitting unit, reject any mode setting
>  	 * request
> -	 * Will figure out a way to do up-scaling(pannel fitting) later.
> +	 * Will figure out a way to do up-scaling(panel fitting) later.
>  	 **/
>  	if (fixed_mode) {
>  		if (mode->hdisplay != fixed_mode->hdisplay)
> @@ -531,7 +531,7 @@ void mdfld_dsi_output_init(struct drm_device *dev,
>  	dsi_config->connector = dsi_connector;
>  
>  	if (!dsi_config->fixed_mode) {
> -		DRM_ERROR("No pannel fixed mode was found\n");
> +		DRM_ERROR("No panel fixed mode was found\n");
>  		goto dsi_init_err0;
>  	}
>  
> diff --git a/drivers/gpu/drm/gma500/psb_intel_sdvo.c b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> index 06e44f47e73e..907f966d6f22 100644
> --- a/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> +++ b/drivers/gpu/drm/gma500/psb_intel_sdvo.c
> @@ -125,7 +125,7 @@ struct psb_intel_sdvo {
>  	bool is_lvds;
>  
>  	/**
> -	 * This is sdvo fixed pannel mode pointer
> +	 * This is sdvo fixed panel mode pointer
>  	 */
>  	struct drm_display_mode *sdvo_lvds_fixed_mode;
>  
> -- 
> 2.27.0
> 

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-08-07  8:53 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-05 12:42 [PATCH] drm/gma500: fix spelling mistake "pannel" -> "panel" Colin King
2020-08-05 12:42 ` Colin King
2020-08-05 12:42 ` Colin King
2020-08-07  8:53 ` daniel
2020-08-07  8:53   ` daniel
2020-08-07  8:53   ` daniel

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.