* [PATCH v3 0/7] blktests: Add support to run nvme tests with tcp/rdma transports
@ 2020-08-11 21:00 ` Sagi Grimberg
0 siblings, 0 replies; 28+ messages in thread
From: Sagi Grimberg @ 2020-08-11 21:00 UTC (permalink / raw)
To: linux-nvme, linux-block, Omar Sandoval
Cc: Chaitanya Kulkarni, Christoph Hellwig, Keith Busch, Bart Van Assche
We have a collection of nvme tests, but all run with nvme-loop. This
is the easiest to run on a standalone machine. However its very much possible
to run nvme-tcp and nvme-rdma using a loopback network. Add capability to run
tests with a new environment variable to set the transport type $nvme_trtype.
$ nvme_trtype=[loop|tcp|rdma] ./check test/nvme
This buys us some nice coverage on some more transport types. We also add
some transport type specific helpers to mark tests that are relevant only
for a single transport.
Changes from v2:
- changed patch 6 to move unload_module to common/rc
- changed helper to be named _require_nvme_trtype_is_fabrics
Changes from v1:
- added patch to remove use of module_unload
- move trtype agnostic logig helpers in patch #3
Sagi Grimberg (7):
nvme: consolidate nvme requirements based on transport type
nvme: consolidate some nvme-cli utility functions
nvme: make tests transport type agnostic
tests/nvme: restrict tests to specific transports
nvme: support nvme-tcp when runinng tests
common: move module_unload to common
nvme: support rdma transport type
common/rc | 13 +++++
tests/nvme/002 | 8 +--
tests/nvme/003 | 10 ++--
tests/nvme/004 | 12 +++--
tests/nvme/005 | 15 +++---
tests/nvme/006 | 7 +--
tests/nvme/007 | 5 +-
tests/nvme/008 | 13 ++---
tests/nvme/009 | 11 ++--
tests/nvme/010 | 13 ++---
tests/nvme/011 | 13 ++---
tests/nvme/012 | 14 +++---
tests/nvme/013 | 13 ++---
tests/nvme/014 | 13 ++---
tests/nvme/015 | 12 +++--
tests/nvme/016 | 7 +--
tests/nvme/017 | 7 +--
tests/nvme/018 | 13 ++---
tests/nvme/019 | 13 ++---
tests/nvme/020 | 11 ++--
tests/nvme/021 | 13 ++---
tests/nvme/022 | 13 ++---
tests/nvme/023 | 13 ++---
tests/nvme/024 | 13 ++---
tests/nvme/025 | 13 ++---
tests/nvme/026 | 13 ++---
tests/nvme/027 | 13 ++---
tests/nvme/028 | 15 +++---
tests/nvme/029 | 13 ++---
tests/nvme/030 | 8 +--
tests/nvme/031 | 12 ++---
tests/nvme/032 | 4 ++
tests/nvme/rc | 122 ++++++++++++++++++++++++++++++++++++++++++---
tests/nvmeof-mp/rc | 13 -----
34 files changed, 322 insertions(+), 179 deletions(-)
--
2.25.1
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH v3 0/7] blktests: Add support to run nvme tests with tcp/rdma transports
@ 2020-08-11 21:00 ` Sagi Grimberg
0 siblings, 0 replies; 28+ messages in thread
From: Sagi Grimberg @ 2020-08-11 21:00 UTC (permalink / raw)
To: linux-nvme, linux-block, Omar Sandoval
Cc: Keith Busch, Christoph Hellwig, Chaitanya Kulkarni, Bart Van Assche
We have a collection of nvme tests, but all run with nvme-loop. This
is the easiest to run on a standalone machine. However its very much possible
to run nvme-tcp and nvme-rdma using a loopback network. Add capability to run
tests with a new environment variable to set the transport type $nvme_trtype.
$ nvme_trtype=[loop|tcp|rdma] ./check test/nvme
This buys us some nice coverage on some more transport types. We also add
some transport type specific helpers to mark tests that are relevant only
for a single transport.
Changes from v2:
- changed patch 6 to move unload_module to common/rc
- changed helper to be named _require_nvme_trtype_is_fabrics
Changes from v1:
- added patch to remove use of module_unload
- move trtype agnostic logig helpers in patch #3
Sagi Grimberg (7):
nvme: consolidate nvme requirements based on transport type
nvme: consolidate some nvme-cli utility functions
nvme: make tests transport type agnostic
tests/nvme: restrict tests to specific transports
nvme: support nvme-tcp when runinng tests
common: move module_unload to common
nvme: support rdma transport type
common/rc | 13 +++++
tests/nvme/002 | 8 +--
tests/nvme/003 | 10 ++--
tests/nvme/004 | 12 +++--
tests/nvme/005 | 15 +++---
tests/nvme/006 | 7 +--
tests/nvme/007 | 5 +-
tests/nvme/008 | 13 ++---
tests/nvme/009 | 11 ++--
tests/nvme/010 | 13 ++---
tests/nvme/011 | 13 ++---
tests/nvme/012 | 14 +++---
tests/nvme/013 | 13 ++---
tests/nvme/014 | 13 ++---
tests/nvme/015 | 12 +++--
tests/nvme/016 | 7 +--
tests/nvme/017 | 7 +--
tests/nvme/018 | 13 ++---
tests/nvme/019 | 13 ++---
tests/nvme/020 | 11 ++--
tests/nvme/021 | 13 ++---
tests/nvme/022 | 13 ++---
tests/nvme/023 | 13 ++---
tests/nvme/024 | 13 ++---
tests/nvme/025 | 13 ++---
tests/nvme/026 | 13 ++---
tests/nvme/027 | 13 ++---
tests/nvme/028 | 15 +++---
tests/nvme/029 | 13 ++---
tests/nvme/030 | 8 +--
tests/nvme/031 | 12 ++---
tests/nvme/032 | 4 ++
tests/nvme/rc | 122 ++++++++++++++++++++++++++++++++++++++++++---
tests/nvmeof-mp/rc | 13 -----
34 files changed, 322 insertions(+), 179 deletions(-)
--
2.25.1
_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH v3 1/7] nvme: consolidate nvme requirements based on transport type
2020-08-11 21:00 ` Sagi Grimberg
@ 2020-08-11 21:00 ` Sagi Grimberg
-1 siblings, 0 replies; 28+ messages in thread
From: Sagi Grimberg @ 2020-08-11 21:00 UTC (permalink / raw)
To: linux-nvme, linux-block, Omar Sandoval
Cc: Chaitanya Kulkarni, Christoph Hellwig, Keith Busch, Bart Van Assche
Right now, only pci and loop have tests, hence these are
the only ones that are allowed. The user can pass an env
variable nvme_trtype and check for the necessary modules.
This allows prepares us to support other transport types.
Note that test 031 is designed to run only with nvme, hence
it overrides the environment variable to nvme_trtype=pci.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
---
tests/nvme/002 | 3 ++-
tests/nvme/003 | 3 ++-
tests/nvme/004 | 3 ++-
tests/nvme/005 | 6 +++---
tests/nvme/006 | 4 ++--
tests/nvme/007 | 2 +-
tests/nvme/008 | 4 ++--
tests/nvme/009 | 2 +-
tests/nvme/010 | 4 ++--
tests/nvme/011 | 4 ++--
tests/nvme/012 | 5 +++--
tests/nvme/013 | 4 ++--
tests/nvme/014 | 4 ++--
tests/nvme/015 | 3 ++-
tests/nvme/016 | 2 +-
tests/nvme/017 | 2 +-
tests/nvme/018 | 4 ++--
tests/nvme/019 | 4 ++--
tests/nvme/020 | 2 +-
tests/nvme/021 | 4 ++--
tests/nvme/022 | 4 ++--
tests/nvme/023 | 4 ++--
tests/nvme/024 | 4 ++--
tests/nvme/025 | 4 ++--
tests/nvme/026 | 4 ++--
tests/nvme/027 | 4 ++--
tests/nvme/028 | 4 ++--
tests/nvme/029 | 4 ++--
tests/nvme/030 | 5 ++---
tests/nvme/031 | 5 ++---
tests/nvme/032 | 4 ++++
tests/nvme/rc | 19 +++++++++++++++++++
32 files changed, 80 insertions(+), 54 deletions(-)
diff --git a/tests/nvme/002 b/tests/nvme/002
index 07b7fdae2d39..aaa5ec4d729a 100755
--- a/tests/nvme/002
+++ b/tests/nvme/002
@@ -10,7 +10,8 @@
DESCRIPTION="create many subsystems and test discovery"
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/003 b/tests/nvme/003
index ed0feca3cac7..fd696d9efe2c 100755
--- a/tests/nvme/003
+++ b/tests/nvme/003
@@ -11,7 +11,8 @@ DESCRIPTION="test if we're sending keep-alives to a discovery controller"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/004 b/tests/nvme/004
index 0debcd9c7049..b841a8d4cd87 100755
--- a/tests/nvme/004
+++ b/tests/nvme/004
@@ -12,7 +12,8 @@ DESCRIPTION="test nvme and nvmet UUID NS descriptors"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/005 b/tests/nvme/005
index 8c79d234bb1d..df0900b372be 100755
--- a/tests/nvme/005
+++ b/tests/nvme/005
@@ -11,9 +11,9 @@ DESCRIPTION="reset local loopback target"
QUICK=1
requires() {
- _have_modules loop nvme-core nvme-loop nvmet && \
- _have_module_param_value nvme_core multipath Y && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop && \
+ _have_module_param_value nvme_core multipath Y
}
test() {
diff --git a/tests/nvme/006 b/tests/nvme/006
index 6c8e18560264..3f47613d52d2 100755
--- a/tests/nvme/006
+++ b/tests/nvme/006
@@ -10,8 +10,8 @@ DESCRIPTION="create an NVMeOF target with a block device-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/007 b/tests/nvme/007
index 58f4bf8808a1..0902745a4ab2 100755
--- a/tests/nvme/007
+++ b/tests/nvme/007
@@ -10,7 +10,7 @@ DESCRIPTION="create an NVMeOF target with a file-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules nvme-loop nvmet && _have_configfs
+ _nvme_requires
}
test() {
diff --git a/tests/nvme/008 b/tests/nvme/008
index 71ff4d962b00..f19de17fefac 100755
--- a/tests/nvme/008
+++ b/tests/nvme/008
@@ -10,8 +10,8 @@ DESCRIPTION="create an NVMeOF host with a block device-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/009 b/tests/nvme/009
index 25c7da2ab854..4afbe62864f6 100755
--- a/tests/nvme/009
+++ b/tests/nvme/009
@@ -10,7 +10,7 @@ DESCRIPTION="create an NVMeOF host with a file-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules nvme-loop nvmet && _have_configfs
+ _nvme_requires
}
test() {
diff --git a/tests/nvme/010 b/tests/nvme/010
index 2ed0f4871a30..53b97484615f 100755
--- a/tests/nvme/010
+++ b/tests/nvme/010
@@ -10,8 +10,8 @@ DESCRIPTION="run data verification fio job on NVMeOF block device-backed ns"
TIMED=1
requires() {
- _have_program nvme && _have_fio && \
- _have_modules loop nvme-loop nvmet && _have_configfs
+ _nvme_requires
+ _have_fio _have_modules loop
}
test() {
diff --git a/tests/nvme/011 b/tests/nvme/011
index 974b33745b99..a54583d5c582 100755
--- a/tests/nvme/011
+++ b/tests/nvme/011
@@ -10,8 +10,8 @@ DESCRIPTION="run data verification fio job on NVMeOF file-backed ns"
TIMED=1
requires() {
- _have_program nvme && _have_fio && _have_configfs && \
- _have_modules nvme-loop nvmet
+ _nvme_requires
+ _have_fio
}
test() {
diff --git a/tests/nvme/012 b/tests/nvme/012
index 27981e903c58..0049c3d8ceb6 100755
--- a/tests/nvme/012
+++ b/tests/nvme/012
@@ -10,8 +10,9 @@ DESCRIPTION="run mkfs and data verification fio job on NVMeOF block device-backe
TIMED=1
requires() {
- _have_program nvme && _have_program mkfs.xfs && _have_program fio && \
- _have_modules loop nvme-loop nvmet && _have_configfs
+ _nvme_requires
+ _have_program mkfs.xfs && _have_program fio && \
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/013 b/tests/nvme/013
index af5f3730a2fc..622706ec4088 100755
--- a/tests/nvme/013
+++ b/tests/nvme/013
@@ -10,8 +10,8 @@ DESCRIPTION="run mkfs and data verification fio job on NVMeOF file-backed ns"
TIMED=1
requires() {
- _have_program nvme && _have_program mkfs.xfs && _have_fio && \
- _have_modules nvme-loop nvmet && _have_configfs
+ _nvme_requires
+ _have_program mkfs.xfs && _have_fio
}
test() {
diff --git a/tests/nvme/014 b/tests/nvme/014
index c255d5f12205..9517230253ab 100755
--- a/tests/nvme/014
+++ b/tests/nvme/014
@@ -10,8 +10,8 @@ DESCRIPTION="flush a NVMeOF block device-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/015 b/tests/nvme/015
index a8497a2ba400..40b850974b43 100755
--- a/tests/nvme/015
+++ b/tests/nvme/015
@@ -10,7 +10,8 @@ DESCRIPTION="unit test for NVMe flush for file backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/016 b/tests/nvme/016
index f1e383cb441a..e1bad2f81461 100755
--- a/tests/nvme/016
+++ b/tests/nvme/016
@@ -9,7 +9,7 @@
DESCRIPTION="create/delete many NVMeOF block device-backed ns and test discovery"
requires() {
- _have_program nvme && _have_modules nvme-loop nvmet && _have_configfs
+ _nvme_requires
}
test() {
diff --git a/tests/nvme/017 b/tests/nvme/017
index 6787b5c754ba..2e6d649f9b65 100755
--- a/tests/nvme/017
+++ b/tests/nvme/017
@@ -9,7 +9,7 @@
DESCRIPTION="create/delete many file-ns and test discovery"
requires() {
- _have_program nvme && _have_modules nvme-loop nvmet && _have_configfs
+ _nvme_requires
}
test() {
diff --git a/tests/nvme/018 b/tests/nvme/018
index 67d89a6f0b24..e39613709c90 100755
--- a/tests/nvme/018
+++ b/tests/nvme/018
@@ -11,8 +11,8 @@ DESCRIPTION="unit test NVMe-oF out of range access on a file backend"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/019 b/tests/nvme/019
index a8b0204ec0eb..86a2a2945b35 100755
--- a/tests/nvme/019
+++ b/tests/nvme/019
@@ -10,8 +10,8 @@ DESCRIPTION="test NVMe DSM Discard command on NVMeOF block-device ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/020 b/tests/nvme/020
index b480ee1b92d0..ccadec6a5822 100755
--- a/tests/nvme/020
+++ b/tests/nvme/020
@@ -10,7 +10,7 @@ DESCRIPTION="test NVMe DSM Discard command on NVMeOF file-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules nvme-loop nvmet && _have_configfs
+ _nvme_requires
}
test() {
diff --git a/tests/nvme/021 b/tests/nvme/021
index bbee54d16ff1..bbcb9d56a350 100755
--- a/tests/nvme/021
+++ b/tests/nvme/021
@@ -10,8 +10,8 @@ DESCRIPTION="test NVMe list command on NVMeOF file-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/022 b/tests/nvme/022
index 9ba07c1cc50f..452e7b3d196c 100755
--- a/tests/nvme/022
+++ b/tests/nvme/022
@@ -10,8 +10,8 @@ DESCRIPTION="test NVMe reset command on NVMeOF file-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/023 b/tests/nvme/023
index ed2a5ad7653f..2714571d16d9 100755
--- a/tests/nvme/023
+++ b/tests/nvme/023
@@ -10,8 +10,8 @@ DESCRIPTION="test NVMe smart-log command on NVMeOF block-device ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/024 b/tests/nvme/024
index 538580947c5c..1f87bd19ec69 100755
--- a/tests/nvme/024
+++ b/tests/nvme/024
@@ -10,8 +10,8 @@ DESCRIPTION="test NVMe smart-log command on NVMeOF file-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/025 b/tests/nvme/025
index 0039fefa5007..1b9e33351f61 100755
--- a/tests/nvme/025
+++ b/tests/nvme/025
@@ -10,8 +10,8 @@ DESCRIPTION="test NVMe effects-log command on NVMeOF file-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/026 b/tests/nvme/026
index 7e89d840529c..21a265a630ba 100755
--- a/tests/nvme/026
+++ b/tests/nvme/026
@@ -10,8 +10,8 @@ DESCRIPTION="test NVMe ns-descs command on NVMeOF file-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/027 b/tests/nvme/027
index 4d293beb8b47..d7d33796e122 100755
--- a/tests/nvme/027
+++ b/tests/nvme/027
@@ -10,8 +10,8 @@ DESCRIPTION="test NVMe ns-rescan command on NVMeOF file-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/028 b/tests/nvme/028
index 1280107ed5df..1643857437e8 100755
--- a/tests/nvme/028
+++ b/tests/nvme/028
@@ -10,8 +10,8 @@ DESCRIPTION="test NVMe list-subsys command on NVMeOF file-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/029 b/tests/nvme/029
index 65eb40031888..9f437285d085 100755
--- a/tests/nvme/029
+++ b/tests/nvme/029
@@ -11,8 +11,8 @@ DESCRIPTION="test userspace IO via nvme-cli read/write interface"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test_user_io()
diff --git a/tests/nvme/030 b/tests/nvme/030
index 94020f47411e..7156cad7b657 100755
--- a/tests/nvme/030
+++ b/tests/nvme/030
@@ -10,9 +10,8 @@ DESCRIPTION="ensure the discovery generation counter is updated appropriately"
QUICK=1
requires() {
- _have_program nvme &&
- _have_modules loop nvme-loop nvmet &&
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
diff --git a/tests/nvme/031 b/tests/nvme/031
index 892f20bad9a7..7e7ee7327e62 100755
--- a/tests/nvme/031
+++ b/tests/nvme/031
@@ -18,9 +18,8 @@ DESCRIPTION="test deletion of NVMeOF controllers immediately after setup"
QUICK=1
requires() {
- _have_program nvme &&
- _have_modules loop nvme-loop nvmet &&
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/032 b/tests/nvme/032
index 0d0d53b325e6..017d4a339971 100755
--- a/tests/nvme/032
+++ b/tests/nvme/032
@@ -11,11 +11,15 @@
. tests/nvme/rc
+#restrict test to nvme-pci only
+nvme_trtype=pci
+
DESCRIPTION="test nvme pci adapter rescan/reset/remove during I/O"
QUICK=1
CAN_BE_ZONED=1
requires() {
+ _nvme_requires
_have_fio
}
diff --git a/tests/nvme/rc b/tests/nvme/rc
index 6ffa971b4308..320aa4b2b475 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -6,6 +6,25 @@
. common/rc
+nvme_trtype=${nvme_trtype:-"loop"}
+
+_nvme_requires() {
+ _have_program nvme
+ case ${nvme_trtype} in
+ loop)
+ _have_modules nvmet nvme-core nvme-loop
+ _have_configfs
+ ;;
+ pci)
+ _have_modules nvme nvme-core
+ ;;
+ *)
+ SKIP_REASON="unsupported nvme_trtype=${nvme_trtype}"
+ return 1
+ esac
+ return 0
+}
+
group_requires() {
_have_root
}
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v3 1/7] nvme: consolidate nvme requirements based on transport type
@ 2020-08-11 21:00 ` Sagi Grimberg
0 siblings, 0 replies; 28+ messages in thread
From: Sagi Grimberg @ 2020-08-11 21:00 UTC (permalink / raw)
To: linux-nvme, linux-block, Omar Sandoval
Cc: Keith Busch, Christoph Hellwig, Chaitanya Kulkarni, Bart Van Assche
Right now, only pci and loop have tests, hence these are
the only ones that are allowed. The user can pass an env
variable nvme_trtype and check for the necessary modules.
This allows prepares us to support other transport types.
Note that test 031 is designed to run only with nvme, hence
it overrides the environment variable to nvme_trtype=pci.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
---
tests/nvme/002 | 3 ++-
tests/nvme/003 | 3 ++-
tests/nvme/004 | 3 ++-
tests/nvme/005 | 6 +++---
tests/nvme/006 | 4 ++--
tests/nvme/007 | 2 +-
tests/nvme/008 | 4 ++--
tests/nvme/009 | 2 +-
tests/nvme/010 | 4 ++--
tests/nvme/011 | 4 ++--
tests/nvme/012 | 5 +++--
tests/nvme/013 | 4 ++--
tests/nvme/014 | 4 ++--
tests/nvme/015 | 3 ++-
tests/nvme/016 | 2 +-
tests/nvme/017 | 2 +-
tests/nvme/018 | 4 ++--
tests/nvme/019 | 4 ++--
tests/nvme/020 | 2 +-
tests/nvme/021 | 4 ++--
tests/nvme/022 | 4 ++--
tests/nvme/023 | 4 ++--
tests/nvme/024 | 4 ++--
tests/nvme/025 | 4 ++--
tests/nvme/026 | 4 ++--
tests/nvme/027 | 4 ++--
tests/nvme/028 | 4 ++--
tests/nvme/029 | 4 ++--
tests/nvme/030 | 5 ++---
tests/nvme/031 | 5 ++---
tests/nvme/032 | 4 ++++
tests/nvme/rc | 19 +++++++++++++++++++
32 files changed, 80 insertions(+), 54 deletions(-)
diff --git a/tests/nvme/002 b/tests/nvme/002
index 07b7fdae2d39..aaa5ec4d729a 100755
--- a/tests/nvme/002
+++ b/tests/nvme/002
@@ -10,7 +10,8 @@
DESCRIPTION="create many subsystems and test discovery"
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/003 b/tests/nvme/003
index ed0feca3cac7..fd696d9efe2c 100755
--- a/tests/nvme/003
+++ b/tests/nvme/003
@@ -11,7 +11,8 @@ DESCRIPTION="test if we're sending keep-alives to a discovery controller"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/004 b/tests/nvme/004
index 0debcd9c7049..b841a8d4cd87 100755
--- a/tests/nvme/004
+++ b/tests/nvme/004
@@ -12,7 +12,8 @@ DESCRIPTION="test nvme and nvmet UUID NS descriptors"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/005 b/tests/nvme/005
index 8c79d234bb1d..df0900b372be 100755
--- a/tests/nvme/005
+++ b/tests/nvme/005
@@ -11,9 +11,9 @@ DESCRIPTION="reset local loopback target"
QUICK=1
requires() {
- _have_modules loop nvme-core nvme-loop nvmet && \
- _have_module_param_value nvme_core multipath Y && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop && \
+ _have_module_param_value nvme_core multipath Y
}
test() {
diff --git a/tests/nvme/006 b/tests/nvme/006
index 6c8e18560264..3f47613d52d2 100755
--- a/tests/nvme/006
+++ b/tests/nvme/006
@@ -10,8 +10,8 @@ DESCRIPTION="create an NVMeOF target with a block device-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/007 b/tests/nvme/007
index 58f4bf8808a1..0902745a4ab2 100755
--- a/tests/nvme/007
+++ b/tests/nvme/007
@@ -10,7 +10,7 @@ DESCRIPTION="create an NVMeOF target with a file-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules nvme-loop nvmet && _have_configfs
+ _nvme_requires
}
test() {
diff --git a/tests/nvme/008 b/tests/nvme/008
index 71ff4d962b00..f19de17fefac 100755
--- a/tests/nvme/008
+++ b/tests/nvme/008
@@ -10,8 +10,8 @@ DESCRIPTION="create an NVMeOF host with a block device-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/009 b/tests/nvme/009
index 25c7da2ab854..4afbe62864f6 100755
--- a/tests/nvme/009
+++ b/tests/nvme/009
@@ -10,7 +10,7 @@ DESCRIPTION="create an NVMeOF host with a file-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules nvme-loop nvmet && _have_configfs
+ _nvme_requires
}
test() {
diff --git a/tests/nvme/010 b/tests/nvme/010
index 2ed0f4871a30..53b97484615f 100755
--- a/tests/nvme/010
+++ b/tests/nvme/010
@@ -10,8 +10,8 @@ DESCRIPTION="run data verification fio job on NVMeOF block device-backed ns"
TIMED=1
requires() {
- _have_program nvme && _have_fio && \
- _have_modules loop nvme-loop nvmet && _have_configfs
+ _nvme_requires
+ _have_fio _have_modules loop
}
test() {
diff --git a/tests/nvme/011 b/tests/nvme/011
index 974b33745b99..a54583d5c582 100755
--- a/tests/nvme/011
+++ b/tests/nvme/011
@@ -10,8 +10,8 @@ DESCRIPTION="run data verification fio job on NVMeOF file-backed ns"
TIMED=1
requires() {
- _have_program nvme && _have_fio && _have_configfs && \
- _have_modules nvme-loop nvmet
+ _nvme_requires
+ _have_fio
}
test() {
diff --git a/tests/nvme/012 b/tests/nvme/012
index 27981e903c58..0049c3d8ceb6 100755
--- a/tests/nvme/012
+++ b/tests/nvme/012
@@ -10,8 +10,9 @@ DESCRIPTION="run mkfs and data verification fio job on NVMeOF block device-backe
TIMED=1
requires() {
- _have_program nvme && _have_program mkfs.xfs && _have_program fio && \
- _have_modules loop nvme-loop nvmet && _have_configfs
+ _nvme_requires
+ _have_program mkfs.xfs && _have_program fio && \
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/013 b/tests/nvme/013
index af5f3730a2fc..622706ec4088 100755
--- a/tests/nvme/013
+++ b/tests/nvme/013
@@ -10,8 +10,8 @@ DESCRIPTION="run mkfs and data verification fio job on NVMeOF file-backed ns"
TIMED=1
requires() {
- _have_program nvme && _have_program mkfs.xfs && _have_fio && \
- _have_modules nvme-loop nvmet && _have_configfs
+ _nvme_requires
+ _have_program mkfs.xfs && _have_fio
}
test() {
diff --git a/tests/nvme/014 b/tests/nvme/014
index c255d5f12205..9517230253ab 100755
--- a/tests/nvme/014
+++ b/tests/nvme/014
@@ -10,8 +10,8 @@ DESCRIPTION="flush a NVMeOF block device-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/015 b/tests/nvme/015
index a8497a2ba400..40b850974b43 100755
--- a/tests/nvme/015
+++ b/tests/nvme/015
@@ -10,7 +10,8 @@ DESCRIPTION="unit test for NVMe flush for file backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/016 b/tests/nvme/016
index f1e383cb441a..e1bad2f81461 100755
--- a/tests/nvme/016
+++ b/tests/nvme/016
@@ -9,7 +9,7 @@
DESCRIPTION="create/delete many NVMeOF block device-backed ns and test discovery"
requires() {
- _have_program nvme && _have_modules nvme-loop nvmet && _have_configfs
+ _nvme_requires
}
test() {
diff --git a/tests/nvme/017 b/tests/nvme/017
index 6787b5c754ba..2e6d649f9b65 100755
--- a/tests/nvme/017
+++ b/tests/nvme/017
@@ -9,7 +9,7 @@
DESCRIPTION="create/delete many file-ns and test discovery"
requires() {
- _have_program nvme && _have_modules nvme-loop nvmet && _have_configfs
+ _nvme_requires
}
test() {
diff --git a/tests/nvme/018 b/tests/nvme/018
index 67d89a6f0b24..e39613709c90 100755
--- a/tests/nvme/018
+++ b/tests/nvme/018
@@ -11,8 +11,8 @@ DESCRIPTION="unit test NVMe-oF out of range access on a file backend"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/019 b/tests/nvme/019
index a8b0204ec0eb..86a2a2945b35 100755
--- a/tests/nvme/019
+++ b/tests/nvme/019
@@ -10,8 +10,8 @@ DESCRIPTION="test NVMe DSM Discard command on NVMeOF block-device ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/020 b/tests/nvme/020
index b480ee1b92d0..ccadec6a5822 100755
--- a/tests/nvme/020
+++ b/tests/nvme/020
@@ -10,7 +10,7 @@ DESCRIPTION="test NVMe DSM Discard command on NVMeOF file-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules nvme-loop nvmet && _have_configfs
+ _nvme_requires
}
test() {
diff --git a/tests/nvme/021 b/tests/nvme/021
index bbee54d16ff1..bbcb9d56a350 100755
--- a/tests/nvme/021
+++ b/tests/nvme/021
@@ -10,8 +10,8 @@ DESCRIPTION="test NVMe list command on NVMeOF file-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/022 b/tests/nvme/022
index 9ba07c1cc50f..452e7b3d196c 100755
--- a/tests/nvme/022
+++ b/tests/nvme/022
@@ -10,8 +10,8 @@ DESCRIPTION="test NVMe reset command on NVMeOF file-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/023 b/tests/nvme/023
index ed2a5ad7653f..2714571d16d9 100755
--- a/tests/nvme/023
+++ b/tests/nvme/023
@@ -10,8 +10,8 @@ DESCRIPTION="test NVMe smart-log command on NVMeOF block-device ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/024 b/tests/nvme/024
index 538580947c5c..1f87bd19ec69 100755
--- a/tests/nvme/024
+++ b/tests/nvme/024
@@ -10,8 +10,8 @@ DESCRIPTION="test NVMe smart-log command on NVMeOF file-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/025 b/tests/nvme/025
index 0039fefa5007..1b9e33351f61 100755
--- a/tests/nvme/025
+++ b/tests/nvme/025
@@ -10,8 +10,8 @@ DESCRIPTION="test NVMe effects-log command on NVMeOF file-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/026 b/tests/nvme/026
index 7e89d840529c..21a265a630ba 100755
--- a/tests/nvme/026
+++ b/tests/nvme/026
@@ -10,8 +10,8 @@ DESCRIPTION="test NVMe ns-descs command on NVMeOF file-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/027 b/tests/nvme/027
index 4d293beb8b47..d7d33796e122 100755
--- a/tests/nvme/027
+++ b/tests/nvme/027
@@ -10,8 +10,8 @@ DESCRIPTION="test NVMe ns-rescan command on NVMeOF file-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/028 b/tests/nvme/028
index 1280107ed5df..1643857437e8 100755
--- a/tests/nvme/028
+++ b/tests/nvme/028
@@ -10,8 +10,8 @@ DESCRIPTION="test NVMe list-subsys command on NVMeOF file-backed ns"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/029 b/tests/nvme/029
index 65eb40031888..9f437285d085 100755
--- a/tests/nvme/029
+++ b/tests/nvme/029
@@ -11,8 +11,8 @@ DESCRIPTION="test userspace IO via nvme-cli read/write interface"
QUICK=1
requires() {
- _have_program nvme && _have_modules loop nvme-loop nvmet && \
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test_user_io()
diff --git a/tests/nvme/030 b/tests/nvme/030
index 94020f47411e..7156cad7b657 100755
--- a/tests/nvme/030
+++ b/tests/nvme/030
@@ -10,9 +10,8 @@ DESCRIPTION="ensure the discovery generation counter is updated appropriately"
QUICK=1
requires() {
- _have_program nvme &&
- _have_modules loop nvme-loop nvmet &&
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
diff --git a/tests/nvme/031 b/tests/nvme/031
index 892f20bad9a7..7e7ee7327e62 100755
--- a/tests/nvme/031
+++ b/tests/nvme/031
@@ -18,9 +18,8 @@ DESCRIPTION="test deletion of NVMeOF controllers immediately after setup"
QUICK=1
requires() {
- _have_program nvme &&
- _have_modules loop nvme-loop nvmet &&
- _have_configfs
+ _nvme_requires
+ _have_modules loop
}
test() {
diff --git a/tests/nvme/032 b/tests/nvme/032
index 0d0d53b325e6..017d4a339971 100755
--- a/tests/nvme/032
+++ b/tests/nvme/032
@@ -11,11 +11,15 @@
. tests/nvme/rc
+#restrict test to nvme-pci only
+nvme_trtype=pci
+
DESCRIPTION="test nvme pci adapter rescan/reset/remove during I/O"
QUICK=1
CAN_BE_ZONED=1
requires() {
+ _nvme_requires
_have_fio
}
diff --git a/tests/nvme/rc b/tests/nvme/rc
index 6ffa971b4308..320aa4b2b475 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -6,6 +6,25 @@
. common/rc
+nvme_trtype=${nvme_trtype:-"loop"}
+
+_nvme_requires() {
+ _have_program nvme
+ case ${nvme_trtype} in
+ loop)
+ _have_modules nvmet nvme-core nvme-loop
+ _have_configfs
+ ;;
+ pci)
+ _have_modules nvme nvme-core
+ ;;
+ *)
+ SKIP_REASON="unsupported nvme_trtype=${nvme_trtype}"
+ return 1
+ esac
+ return 0
+}
+
group_requires() {
_have_root
}
--
2.25.1
_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v3 2/7] nvme: consolidate some nvme-cli utility functions
2020-08-11 21:00 ` Sagi Grimberg
@ 2020-08-11 21:00 ` Sagi Grimberg
-1 siblings, 0 replies; 28+ messages in thread
From: Sagi Grimberg @ 2020-08-11 21:00 UTC (permalink / raw)
To: linux-nvme, linux-block, Omar Sandoval
Cc: Chaitanya Kulkarni, Christoph Hellwig, Keith Busch, Bart Van Assche
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
---
tests/nvme/002 | 2 +-
tests/nvme/003 | 4 ++--
tests/nvme/004 | 4 ++--
tests/nvme/005 | 4 ++--
tests/nvme/008 | 4 ++--
tests/nvme/009 | 4 ++--
tests/nvme/010 | 4 ++--
tests/nvme/011 | 4 ++--
tests/nvme/012 | 4 ++--
tests/nvme/013 | 4 ++--
tests/nvme/014 | 4 ++--
tests/nvme/015 | 4 ++--
tests/nvme/016 | 2 +-
tests/nvme/017 | 2 +-
tests/nvme/018 | 4 ++--
tests/nvme/019 | 4 ++--
tests/nvme/020 | 4 ++--
tests/nvme/021 | 4 ++--
tests/nvme/022 | 4 ++--
tests/nvme/023 | 4 ++--
tests/nvme/024 | 4 ++--
tests/nvme/025 | 4 ++--
tests/nvme/026 | 4 ++--
tests/nvme/027 | 4 ++--
tests/nvme/028 | 4 ++--
tests/nvme/029 | 4 ++--
tests/nvme/031 | 4 ++--
tests/nvme/rc | 31 +++++++++++++++++++++++++++++--
28 files changed, 80 insertions(+), 53 deletions(-)
diff --git a/tests/nvme/002 b/tests/nvme/002
index aaa5ec4d729a..999e222705bf 100755
--- a/tests/nvme/002
+++ b/tests/nvme/002
@@ -31,7 +31,7 @@ test() {
_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-$i"
done
- nvme discover -t loop | _filter_discovery
+ _nvme_discover "loop" | _filter_discovery
for ((i = iterations - 1; i >= 0; i--)); do
_remove_nvmet_subsystem_from_port "${port}" "blktests-subsystem-$i"
diff --git a/tests/nvme/003 b/tests/nvme/003
index fd696d9efe2c..6ea6a23b7942 100755
--- a/tests/nvme/003
+++ b/tests/nvme/003
@@ -29,7 +29,7 @@ test() {
_create_nvmet_subsystem "blktests-subsystem-1" "${loop_dev}"
_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-1"
- nvme connect -t loop -n nqn.2014-08.org.nvmexpress.discovery
+ _nvme_connect_subsys "loop" "nqn.2014-08.org.nvmexpress.discovery"
# This is ugly but checking for the absence of error messages is ...
sleep 10
@@ -42,7 +42,7 @@ test() {
echo "Fail"
fi
- nvme disconnect -n nqn.2014-08.org.nvmexpress.discovery
+ _nvme_disconnect_subsys "nqn.2014-08.org.nvmexpress.discovery"
_remove_nvmet_subsystem_from_port "${port}" "blktests-subsystem-1"
_remove_nvmet_subsystem "blktests-subsystem-1"
_remove_nvmet_port "${port}"
diff --git a/tests/nvme/004 b/tests/nvme/004
index b841a8d4cd87..7ea539fda55e 100755
--- a/tests/nvme/004
+++ b/tests/nvme/004
@@ -33,14 +33,14 @@ test() {
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-1"
- nvme connect -t loop -n blktests-subsystem-1
+ _nvme_connect_subsys "loop" "blktests-subsystem-1"
local nvmedev
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
- nvme disconnect -n "blktests-subsystem-1"
+ _nvme_disconnect_subsys "blktests-subsystem-1"
_remove_nvmet_subsystem_from_port "${port}" "blktests-subsystem-1"
_remove_nvmet_subsystem "blktests-subsystem-1"
_remove_nvmet_port "${port}"
diff --git a/tests/nvme/005 b/tests/nvme/005
index df0900b372be..d4ce6d703c1b 100755
--- a/tests/nvme/005
+++ b/tests/nvme/005
@@ -33,7 +33,7 @@ test() {
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-1"
- nvme connect -t loop -n blktests-subsystem-1
+ _nvme_connect_subsys "loop" "blktests-subsystem-1"
local nvmedev
nvmedev="$(_find_nvme_loop_dev)"
@@ -42,7 +42,7 @@ test() {
echo 1 > "/sys/class/nvme/${nvmedev}/reset_controller"
- nvme disconnect -d "${nvmedev}"
+ _nvme_disconnect_ctrl "${nvmedev}"
_remove_nvmet_subsystem_from_port "${port}" "blktests-subsystem-1"
_remove_nvmet_port "${port}"
diff --git a/tests/nvme/008 b/tests/nvme/008
index f19de17fefac..5ab5c49b2039 100755
--- a/tests/nvme/008
+++ b/tests/nvme/008
@@ -34,7 +34,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -42,7 +42,7 @@ test() {
udevadm settle
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/009 b/tests/nvme/009
index 4afbe62864f6..f6b999dea541 100755
--- a/tests/nvme/009
+++ b/tests/nvme/009
@@ -30,7 +30,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -38,7 +38,7 @@ test() {
udevadm settle
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/010 b/tests/nvme/010
index 53b97484615f..6caa2d0f813d 100755
--- a/tests/nvme/010
+++ b/tests/nvme/010
@@ -34,7 +34,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -42,7 +42,7 @@ test() {
_run_fio_verify_io --size=950m --filename="/dev/${nvmedev}n1"
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/011 b/tests/nvme/011
index a54583d5c582..7a5535982a74 100755
--- a/tests/nvme/011
+++ b/tests/nvme/011
@@ -32,7 +32,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -40,7 +40,7 @@ test() {
_run_fio_verify_io --size=950m --filename="/dev/${nvmedev}n1"
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/012 b/tests/nvme/012
index 0049c3d8ceb6..5c3477a16af9 100755
--- a/tests/nvme/012
+++ b/tests/nvme/012
@@ -38,7 +38,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -54,7 +54,7 @@ test() {
umount "${mount_dir}" > /dev/null 2>&1
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/013 b/tests/nvme/013
index 622706ec4088..49784a0d46b5 100755
--- a/tests/nvme/013
+++ b/tests/nvme/013
@@ -35,7 +35,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -51,7 +51,7 @@ test() {
umount "${mount_dir}" > /dev/null 2>&1
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/014 b/tests/nvme/014
index 9517230253ab..a33ff439fb3d 100755
--- a/tests/nvme/014
+++ b/tests/nvme/014
@@ -34,7 +34,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -44,7 +44,7 @@ test() {
nvme flush "/dev/${nvmedev}" -n 1
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/015 b/tests/nvme/015
index 40b850974b43..cb9792e13442 100755
--- a/tests/nvme/015
+++ b/tests/nvme/015
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -41,7 +41,7 @@ test() {
nvme flush "/dev/${nvmedev}n1" -n 1
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/016 b/tests/nvme/016
index e1bad2f81461..1ad744abb9b0 100755
--- a/tests/nvme/016
+++ b/tests/nvme/016
@@ -33,7 +33,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "$port" "${subsys_nqn}"
- nvme discover -t loop | _filter_discovery
+ _nvme_discover "loop" | _filter_discovery
_remove_nvmet_subsystem_from_port "${port}" "${subsys_nqn}"
_remove_nvmet_port "${port}"
diff --git a/tests/nvme/017 b/tests/nvme/017
index 2e6d649f9b65..2507bcd606b7 100755
--- a/tests/nvme/017
+++ b/tests/nvme/017
@@ -36,7 +36,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme discover -t loop | _filter_discovery
+ _nvme_discover "loop" | _filter_discovery
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_port "${port}"
diff --git a/tests/nvme/018 b/tests/nvme/018
index e39613709c90..4863274cc525 100755
--- a/tests/nvme/018
+++ b/tests/nvme/018
@@ -32,7 +32,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -46,7 +46,7 @@ test() {
nvme read "/dev/${nvmedev}n1" -s "$sectors" -c 0 -z "$bs" &>"$FULL" \
&& echo "ERROR: nvme read for out of range LBA was not rejected"
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/019 b/tests/nvme/019
index 86a2a2945b35..19c5b4755387 100755
--- a/tests/nvme/019
+++ b/tests/nvme/019
@@ -36,7 +36,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -44,7 +44,7 @@ test() {
nvme dsm "/dev/${nvmedev}" -n 1 -d -s "${sblk_range}" -b "${nblk_range}"
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/020 b/tests/nvme/020
index ccadec6a5822..0a817004225a 100755
--- a/tests/nvme/020
+++ b/tests/nvme/020
@@ -32,7 +32,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -40,7 +40,7 @@ test() {
nvme dsm "/dev/${nvmedev}" -n 1 -d -s "${sblk_range}" -b "${nblk_range}"
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/021 b/tests/nvme/021
index bbcb9d56a350..ac3cbd17cd03 100755
--- a/tests/nvme/021
+++ b/tests/nvme/021
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -41,7 +41,7 @@ test() {
echo "ERROR: device not listed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/022 b/tests/nvme/022
index 452e7b3d196c..4c91f98734fc 100755
--- a/tests/nvme/022
+++ b/tests/nvme/022
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -41,7 +41,7 @@ test() {
echo "ERROR: reset failed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/023 b/tests/nvme/023
index 2714571d16d9..dcbe821f2709 100755
--- a/tests/nvme/023
+++ b/tests/nvme/023
@@ -34,7 +34,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -44,7 +44,7 @@ test() {
echo "ERROR: smart-log bdev-ns failed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/024 b/tests/nvme/024
index 1f87bd19ec69..0f4bddcb3142 100755
--- a/tests/nvme/024
+++ b/tests/nvme/024
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -40,7 +40,7 @@ test() {
if ! nvme smart-log "/dev/${nvmedev}" -n 1 >> "$FULL" 2>&1; then
echo "ERROR: smart-log file-ns failed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/025 b/tests/nvme/025
index 1b9e33351f61..90896d327cff 100755
--- a/tests/nvme/025
+++ b/tests/nvme/025
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -41,7 +41,7 @@ test() {
echo "ERROR: effects-log failed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/026 b/tests/nvme/026
index 21a265a630ba..39cfe12a23c7 100755
--- a/tests/nvme/026
+++ b/tests/nvme/026
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -41,7 +41,7 @@ test() {
echo "ERROR: ns-desc failed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/027 b/tests/nvme/027
index d7d33796e122..5915c336a0cd 100755
--- a/tests/nvme/027
+++ b/tests/nvme/027
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -40,7 +40,7 @@ test() {
if ! nvme ns-rescan "/dev/${nvmedev}" >> "$FULL" 2>&1; then
echo "ERROR: ns-rescan failed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/028 b/tests/nvme/028
index 1643857437e8..cf44102b3957 100755
--- a/tests/nvme/028
+++ b/tests/nvme/028
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -40,7 +40,7 @@ test() {
if ! nvme list-subsys 2>> "$FULL" | grep -q loop; then
echo "ERROR: list-subsys"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/029 b/tests/nvme/029
index 9f437285d085..192b5c52168c 100755
--- a/tests/nvme/029
+++ b/tests/nvme/029
@@ -67,7 +67,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -81,7 +81,7 @@ test() {
test_user_io "$dev" 511 1023 > "$FULL" 2>&1 || echo FAIL
test_user_io "$dev" 511 1025 > "$FULL" 2>&1 || echo FAIL
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/031 b/tests/nvme/031
index 7e7ee7327e62..ab17633bc8fc 100755
--- a/tests/nvme/031
+++ b/tests/nvme/031
@@ -41,8 +41,8 @@ test() {
for ((i = 0; i < iterations; i++)); do
_create_nvmet_subsystem "${subsys}$i" "${loop_dev}"
_add_nvmet_subsys_to_port "${port}" "${subsys}$i"
- nvme connect -t loop -n "${subsys}$i"
- nvme disconnect -n "${subsys}$i" >> "${FULL}" 2>&1
+ _nvme_connect_subsys "loop" "${subsys}$i"
+ _nvme_disconnect_subsys "${subsys}$i" >> "${FULL}" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys}$i"
_remove_nvmet_subsystem "${subsys}$i"
done
diff --git a/tests/nvme/rc b/tests/nvme/rc
index 320aa4b2b475..6d57cf591300 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -64,7 +64,7 @@ _cleanup_nvmet() {
transport="$(cat "/sys/class/nvme/${dev}/transport")"
if [[ "$transport" == "loop" ]]; then
echo "WARNING: Test did not clean up loop device: ${dev}"
- nvme disconnect -d "${dev}"
+ _nvme_disconnect_ctrl "${dev}"
fi
done
@@ -97,6 +97,33 @@ _setup_nvmet() {
modprobe nvme-loop
}
+_nvme_disconnect_ctrl() {
+ local ctrl="$1"
+
+ nvme disconnect -d ${ctrl}
+}
+
+_nvme_disconnect_subsys() {
+ local subsysnqn="$1"
+
+ nvme disconnect -n ${subsysnqn}
+}
+
+_nvme_connect_subsys() {
+ local trtype="$1"
+ local subsysnqn="$2"
+
+ cmd="nvme connect -t ${trtype} -n ${subsysnqn}"
+ eval $cmd
+}
+
+_nvme_discover() {
+ local trtype="$1"
+
+ cmd="nvme discover -t ${trtype}"
+ eval $cmd
+}
+
_create_nvmet_port() {
local trtype="$1"
@@ -206,6 +233,6 @@ _filter_discovery() {
}
_discovery_genctr() {
- nvme discover -t loop |
+ _nvme_discover "loop" |
sed -n -e 's/^.*Generation counter \([0-9]\+\).*$/\1/p'
}
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v3 2/7] nvme: consolidate some nvme-cli utility functions
@ 2020-08-11 21:00 ` Sagi Grimberg
0 siblings, 0 replies; 28+ messages in thread
From: Sagi Grimberg @ 2020-08-11 21:00 UTC (permalink / raw)
To: linux-nvme, linux-block, Omar Sandoval
Cc: Keith Busch, Christoph Hellwig, Chaitanya Kulkarni, Bart Van Assche
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
---
tests/nvme/002 | 2 +-
tests/nvme/003 | 4 ++--
tests/nvme/004 | 4 ++--
tests/nvme/005 | 4 ++--
tests/nvme/008 | 4 ++--
tests/nvme/009 | 4 ++--
tests/nvme/010 | 4 ++--
tests/nvme/011 | 4 ++--
tests/nvme/012 | 4 ++--
tests/nvme/013 | 4 ++--
tests/nvme/014 | 4 ++--
tests/nvme/015 | 4 ++--
tests/nvme/016 | 2 +-
tests/nvme/017 | 2 +-
tests/nvme/018 | 4 ++--
tests/nvme/019 | 4 ++--
tests/nvme/020 | 4 ++--
tests/nvme/021 | 4 ++--
tests/nvme/022 | 4 ++--
tests/nvme/023 | 4 ++--
tests/nvme/024 | 4 ++--
tests/nvme/025 | 4 ++--
tests/nvme/026 | 4 ++--
tests/nvme/027 | 4 ++--
tests/nvme/028 | 4 ++--
tests/nvme/029 | 4 ++--
tests/nvme/031 | 4 ++--
tests/nvme/rc | 31 +++++++++++++++++++++++++++++--
28 files changed, 80 insertions(+), 53 deletions(-)
diff --git a/tests/nvme/002 b/tests/nvme/002
index aaa5ec4d729a..999e222705bf 100755
--- a/tests/nvme/002
+++ b/tests/nvme/002
@@ -31,7 +31,7 @@ test() {
_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-$i"
done
- nvme discover -t loop | _filter_discovery
+ _nvme_discover "loop" | _filter_discovery
for ((i = iterations - 1; i >= 0; i--)); do
_remove_nvmet_subsystem_from_port "${port}" "blktests-subsystem-$i"
diff --git a/tests/nvme/003 b/tests/nvme/003
index fd696d9efe2c..6ea6a23b7942 100755
--- a/tests/nvme/003
+++ b/tests/nvme/003
@@ -29,7 +29,7 @@ test() {
_create_nvmet_subsystem "blktests-subsystem-1" "${loop_dev}"
_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-1"
- nvme connect -t loop -n nqn.2014-08.org.nvmexpress.discovery
+ _nvme_connect_subsys "loop" "nqn.2014-08.org.nvmexpress.discovery"
# This is ugly but checking for the absence of error messages is ...
sleep 10
@@ -42,7 +42,7 @@ test() {
echo "Fail"
fi
- nvme disconnect -n nqn.2014-08.org.nvmexpress.discovery
+ _nvme_disconnect_subsys "nqn.2014-08.org.nvmexpress.discovery"
_remove_nvmet_subsystem_from_port "${port}" "blktests-subsystem-1"
_remove_nvmet_subsystem "blktests-subsystem-1"
_remove_nvmet_port "${port}"
diff --git a/tests/nvme/004 b/tests/nvme/004
index b841a8d4cd87..7ea539fda55e 100755
--- a/tests/nvme/004
+++ b/tests/nvme/004
@@ -33,14 +33,14 @@ test() {
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-1"
- nvme connect -t loop -n blktests-subsystem-1
+ _nvme_connect_subsys "loop" "blktests-subsystem-1"
local nvmedev
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
- nvme disconnect -n "blktests-subsystem-1"
+ _nvme_disconnect_subsys "blktests-subsystem-1"
_remove_nvmet_subsystem_from_port "${port}" "blktests-subsystem-1"
_remove_nvmet_subsystem "blktests-subsystem-1"
_remove_nvmet_port "${port}"
diff --git a/tests/nvme/005 b/tests/nvme/005
index df0900b372be..d4ce6d703c1b 100755
--- a/tests/nvme/005
+++ b/tests/nvme/005
@@ -33,7 +33,7 @@ test() {
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-1"
- nvme connect -t loop -n blktests-subsystem-1
+ _nvme_connect_subsys "loop" "blktests-subsystem-1"
local nvmedev
nvmedev="$(_find_nvme_loop_dev)"
@@ -42,7 +42,7 @@ test() {
echo 1 > "/sys/class/nvme/${nvmedev}/reset_controller"
- nvme disconnect -d "${nvmedev}"
+ _nvme_disconnect_ctrl "${nvmedev}"
_remove_nvmet_subsystem_from_port "${port}" "blktests-subsystem-1"
_remove_nvmet_port "${port}"
diff --git a/tests/nvme/008 b/tests/nvme/008
index f19de17fefac..5ab5c49b2039 100755
--- a/tests/nvme/008
+++ b/tests/nvme/008
@@ -34,7 +34,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -42,7 +42,7 @@ test() {
udevadm settle
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/009 b/tests/nvme/009
index 4afbe62864f6..f6b999dea541 100755
--- a/tests/nvme/009
+++ b/tests/nvme/009
@@ -30,7 +30,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -38,7 +38,7 @@ test() {
udevadm settle
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/010 b/tests/nvme/010
index 53b97484615f..6caa2d0f813d 100755
--- a/tests/nvme/010
+++ b/tests/nvme/010
@@ -34,7 +34,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -42,7 +42,7 @@ test() {
_run_fio_verify_io --size=950m --filename="/dev/${nvmedev}n1"
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/011 b/tests/nvme/011
index a54583d5c582..7a5535982a74 100755
--- a/tests/nvme/011
+++ b/tests/nvme/011
@@ -32,7 +32,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -40,7 +40,7 @@ test() {
_run_fio_verify_io --size=950m --filename="/dev/${nvmedev}n1"
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/012 b/tests/nvme/012
index 0049c3d8ceb6..5c3477a16af9 100755
--- a/tests/nvme/012
+++ b/tests/nvme/012
@@ -38,7 +38,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -54,7 +54,7 @@ test() {
umount "${mount_dir}" > /dev/null 2>&1
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/013 b/tests/nvme/013
index 622706ec4088..49784a0d46b5 100755
--- a/tests/nvme/013
+++ b/tests/nvme/013
@@ -35,7 +35,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -51,7 +51,7 @@ test() {
umount "${mount_dir}" > /dev/null 2>&1
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/014 b/tests/nvme/014
index 9517230253ab..a33ff439fb3d 100755
--- a/tests/nvme/014
+++ b/tests/nvme/014
@@ -34,7 +34,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -44,7 +44,7 @@ test() {
nvme flush "/dev/${nvmedev}" -n 1
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/015 b/tests/nvme/015
index 40b850974b43..cb9792e13442 100755
--- a/tests/nvme/015
+++ b/tests/nvme/015
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -41,7 +41,7 @@ test() {
nvme flush "/dev/${nvmedev}n1" -n 1
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/016 b/tests/nvme/016
index e1bad2f81461..1ad744abb9b0 100755
--- a/tests/nvme/016
+++ b/tests/nvme/016
@@ -33,7 +33,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "$port" "${subsys_nqn}"
- nvme discover -t loop | _filter_discovery
+ _nvme_discover "loop" | _filter_discovery
_remove_nvmet_subsystem_from_port "${port}" "${subsys_nqn}"
_remove_nvmet_port "${port}"
diff --git a/tests/nvme/017 b/tests/nvme/017
index 2e6d649f9b65..2507bcd606b7 100755
--- a/tests/nvme/017
+++ b/tests/nvme/017
@@ -36,7 +36,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme discover -t loop | _filter_discovery
+ _nvme_discover "loop" | _filter_discovery
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_port "${port}"
diff --git a/tests/nvme/018 b/tests/nvme/018
index e39613709c90..4863274cc525 100755
--- a/tests/nvme/018
+++ b/tests/nvme/018
@@ -32,7 +32,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -46,7 +46,7 @@ test() {
nvme read "/dev/${nvmedev}n1" -s "$sectors" -c 0 -z "$bs" &>"$FULL" \
&& echo "ERROR: nvme read for out of range LBA was not rejected"
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/019 b/tests/nvme/019
index 86a2a2945b35..19c5b4755387 100755
--- a/tests/nvme/019
+++ b/tests/nvme/019
@@ -36,7 +36,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -44,7 +44,7 @@ test() {
nvme dsm "/dev/${nvmedev}" -n 1 -d -s "${sblk_range}" -b "${nblk_range}"
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/020 b/tests/nvme/020
index ccadec6a5822..0a817004225a 100755
--- a/tests/nvme/020
+++ b/tests/nvme/020
@@ -32,7 +32,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -40,7 +40,7 @@ test() {
nvme dsm "/dev/${nvmedev}" -n 1 -d -s "${sblk_range}" -b "${nblk_range}"
- nvme disconnect -n "${subsys_name}"
+ _nvme_disconnect_subsys "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/021 b/tests/nvme/021
index bbcb9d56a350..ac3cbd17cd03 100755
--- a/tests/nvme/021
+++ b/tests/nvme/021
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -41,7 +41,7 @@ test() {
echo "ERROR: device not listed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/022 b/tests/nvme/022
index 452e7b3d196c..4c91f98734fc 100755
--- a/tests/nvme/022
+++ b/tests/nvme/022
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -41,7 +41,7 @@ test() {
echo "ERROR: reset failed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/023 b/tests/nvme/023
index 2714571d16d9..dcbe821f2709 100755
--- a/tests/nvme/023
+++ b/tests/nvme/023
@@ -34,7 +34,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -44,7 +44,7 @@ test() {
echo "ERROR: smart-log bdev-ns failed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/024 b/tests/nvme/024
index 1f87bd19ec69..0f4bddcb3142 100755
--- a/tests/nvme/024
+++ b/tests/nvme/024
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -40,7 +40,7 @@ test() {
if ! nvme smart-log "/dev/${nvmedev}" -n 1 >> "$FULL" 2>&1; then
echo "ERROR: smart-log file-ns failed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/025 b/tests/nvme/025
index 1b9e33351f61..90896d327cff 100755
--- a/tests/nvme/025
+++ b/tests/nvme/025
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -41,7 +41,7 @@ test() {
echo "ERROR: effects-log failed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/026 b/tests/nvme/026
index 21a265a630ba..39cfe12a23c7 100755
--- a/tests/nvme/026
+++ b/tests/nvme/026
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -41,7 +41,7 @@ test() {
echo "ERROR: ns-desc failed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/027 b/tests/nvme/027
index d7d33796e122..5915c336a0cd 100755
--- a/tests/nvme/027
+++ b/tests/nvme/027
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -40,7 +40,7 @@ test() {
if ! nvme ns-rescan "/dev/${nvmedev}" >> "$FULL" 2>&1; then
echo "ERROR: ns-rescan failed"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/028 b/tests/nvme/028
index 1643857437e8..cf44102b3957 100755
--- a/tests/nvme/028
+++ b/tests/nvme/028
@@ -31,7 +31,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -40,7 +40,7 @@ test() {
if ! nvme list-subsys 2>> "$FULL" | grep -q loop; then
echo "ERROR: list-subsys"
fi
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/029 b/tests/nvme/029
index 9f437285d085..192b5c52168c 100755
--- a/tests/nvme/029
+++ b/tests/nvme/029
@@ -67,7 +67,7 @@ test() {
port="$(_create_nvmet_port "loop")"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- nvme connect -t loop -n "${subsys_name}"
+ _nvme_connect_subsys "loop" "${subsys_name}"
nvmedev="$(_find_nvme_loop_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
@@ -81,7 +81,7 @@ test() {
test_user_io "$dev" 511 1023 > "$FULL" 2>&1 || echo FAIL
test_user_io "$dev" 511 1025 > "$FULL" 2>&1 || echo FAIL
- nvme disconnect -n "${subsys_name}" >> "$FULL" 2>&1
+ _nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem "${subsys_name}"
diff --git a/tests/nvme/031 b/tests/nvme/031
index 7e7ee7327e62..ab17633bc8fc 100755
--- a/tests/nvme/031
+++ b/tests/nvme/031
@@ -41,8 +41,8 @@ test() {
for ((i = 0; i < iterations; i++)); do
_create_nvmet_subsystem "${subsys}$i" "${loop_dev}"
_add_nvmet_subsys_to_port "${port}" "${subsys}$i"
- nvme connect -t loop -n "${subsys}$i"
- nvme disconnect -n "${subsys}$i" >> "${FULL}" 2>&1
+ _nvme_connect_subsys "loop" "${subsys}$i"
+ _nvme_disconnect_subsys "${subsys}$i" >> "${FULL}" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys}$i"
_remove_nvmet_subsystem "${subsys}$i"
done
diff --git a/tests/nvme/rc b/tests/nvme/rc
index 320aa4b2b475..6d57cf591300 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -64,7 +64,7 @@ _cleanup_nvmet() {
transport="$(cat "/sys/class/nvme/${dev}/transport")"
if [[ "$transport" == "loop" ]]; then
echo "WARNING: Test did not clean up loop device: ${dev}"
- nvme disconnect -d "${dev}"
+ _nvme_disconnect_ctrl "${dev}"
fi
done
@@ -97,6 +97,33 @@ _setup_nvmet() {
modprobe nvme-loop
}
+_nvme_disconnect_ctrl() {
+ local ctrl="$1"
+
+ nvme disconnect -d ${ctrl}
+}
+
+_nvme_disconnect_subsys() {
+ local subsysnqn="$1"
+
+ nvme disconnect -n ${subsysnqn}
+}
+
+_nvme_connect_subsys() {
+ local trtype="$1"
+ local subsysnqn="$2"
+
+ cmd="nvme connect -t ${trtype} -n ${subsysnqn}"
+ eval $cmd
+}
+
+_nvme_discover() {
+ local trtype="$1"
+
+ cmd="nvme discover -t ${trtype}"
+ eval $cmd
+}
+
_create_nvmet_port() {
local trtype="$1"
@@ -206,6 +233,6 @@ _filter_discovery() {
}
_discovery_genctr() {
- nvme discover -t loop |
+ _nvme_discover "loop" |
sed -n -e 's/^.*Generation counter \([0-9]\+\).*$/\1/p'
}
--
2.25.1
_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v3 3/7] nvme: make tests transport type agnostic
2020-08-11 21:00 ` Sagi Grimberg
@ 2020-08-11 21:00 ` Sagi Grimberg
-1 siblings, 0 replies; 28+ messages in thread
From: Sagi Grimberg @ 2020-08-11 21:00 UTC (permalink / raw)
To: linux-nvme, linux-block, Omar Sandoval
Cc: Chaitanya Kulkarni, Christoph Hellwig, Keith Busch, Bart Van Assche
Pass in nvme_trtype to common routines that can
support multiple transport types.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
---
tests/nvme/002 | 4 ++--
tests/nvme/003 | 4 ++--
tests/nvme/004 | 6 +++---
tests/nvme/005 | 6 +++---
tests/nvme/006 | 2 +-
tests/nvme/007 | 2 +-
tests/nvme/008 | 6 +++---
tests/nvme/009 | 6 +++---
tests/nvme/010 | 6 +++---
tests/nvme/011 | 6 +++---
tests/nvme/012 | 6 +++---
tests/nvme/013 | 6 +++---
tests/nvme/014 | 6 +++---
tests/nvme/015 | 6 +++---
tests/nvme/016 | 2 +-
tests/nvme/017 | 2 +-
tests/nvme/018 | 6 +++---
tests/nvme/019 | 6 +++---
tests/nvme/020 | 6 +++---
tests/nvme/021 | 6 +++---
tests/nvme/022 | 6 +++---
tests/nvme/023 | 6 +++---
tests/nvme/024 | 6 +++---
tests/nvme/025 | 6 +++---
tests/nvme/026 | 6 +++---
tests/nvme/027 | 6 +++---
tests/nvme/028 | 8 ++++----
tests/nvme/029 | 6 +++---
tests/nvme/030 | 2 +-
tests/nvme/031 | 4 ++--
tests/nvme/rc | 39 ++++++++++++++++++++++++++++++++-------
31 files changed, 110 insertions(+), 85 deletions(-)
diff --git a/tests/nvme/002 b/tests/nvme/002
index 999e222705bf..8540623497c7 100755
--- a/tests/nvme/002
+++ b/tests/nvme/002
@@ -21,7 +21,7 @@ test() {
local iterations=1000
local port
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
local loop_dev
loop_dev="$(losetup -f)"
@@ -31,7 +31,7 @@ test() {
_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-$i"
done
- _nvme_discover "loop" | _filter_discovery
+ _nvme_discover "${nvme_trtype}" | _filter_discovery
for ((i = iterations - 1; i >= 0; i--)); do
_remove_nvmet_subsystem_from_port "${port}" "blktests-subsystem-$i"
diff --git a/tests/nvme/003 b/tests/nvme/003
index 6ea6a23b7942..68f823011d7d 100755
--- a/tests/nvme/003
+++ b/tests/nvme/003
@@ -21,7 +21,7 @@ test() {
_setup_nvmet
local port
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port "${nvme_trtype}")"
local loop_dev
loop_dev="$(losetup -f)"
@@ -29,7 +29,7 @@ test() {
_create_nvmet_subsystem "blktests-subsystem-1" "${loop_dev}"
_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-1"
- _nvme_connect_subsys "loop" "nqn.2014-08.org.nvmexpress.discovery"
+ _nvme_connect_subsys "${nvme_trtype}" "nqn.2014-08.org.nvmexpress.discovery"
# This is ugly but checking for the absence of error messages is ...
sleep 10
diff --git a/tests/nvme/004 b/tests/nvme/004
index 7ea539fda55e..af434674beaa 100755
--- a/tests/nvme/004
+++ b/tests/nvme/004
@@ -22,7 +22,7 @@ test() {
_setup_nvmet
local port
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
truncate -s 1G "$TMPDIR/img"
@@ -33,10 +33,10 @@ test() {
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-1"
- _nvme_connect_subsys "loop" "blktests-subsystem-1"
+ _nvme_connect_subsys ${nvme_trtype} "blktests-subsystem-1"
local nvmedev
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/005 b/tests/nvme/005
index d4ce6d703c1b..ff0975ce7c28 100755
--- a/tests/nvme/005
+++ b/tests/nvme/005
@@ -22,7 +22,7 @@ test() {
_setup_nvmet
local port
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
truncate -s 1G "$TMPDIR/img"
@@ -33,10 +33,10 @@ test() {
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-1"
- _nvme_connect_subsys "loop" "blktests-subsystem-1"
+ _nvme_connect_subsys ${nvme_trtype} "blktests-subsystem-1"
local nvmedev
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
udevadm settle
diff --git a/tests/nvme/006 b/tests/nvme/006
index 3f47613d52d2..3f161d08bc22 100755
--- a/tests/nvme/006
+++ b/tests/nvme/006
@@ -29,7 +29,7 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
diff --git a/tests/nvme/007 b/tests/nvme/007
index 0902745a4ab2..b0e61186e886 100755
--- a/tests/nvme/007
+++ b/tests/nvme/007
@@ -28,7 +28,7 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
diff --git a/tests/nvme/008 b/tests/nvme/008
index 5ab5c49b2039..7ffac945a58a 100755
--- a/tests/nvme/008
+++ b/tests/nvme/008
@@ -31,12 +31,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/009 b/tests/nvme/009
index f6b999dea541..9ac5cb479983 100755
--- a/tests/nvme/009
+++ b/tests/nvme/009
@@ -27,12 +27,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/010 b/tests/nvme/010
index 6caa2d0f813d..d90ca9d88053 100755
--- a/tests/nvme/010
+++ b/tests/nvme/010
@@ -31,12 +31,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/011 b/tests/nvme/011
index 7a5535982a74..d8badbc00846 100755
--- a/tests/nvme/011
+++ b/tests/nvme/011
@@ -29,12 +29,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/012 b/tests/nvme/012
index 5c3477a16af9..93b6cfaf4c77 100755
--- a/tests/nvme/012
+++ b/tests/nvme/012
@@ -35,12 +35,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/013 b/tests/nvme/013
index 49784a0d46b5..3bae2f5edb3d 100755
--- a/tests/nvme/013
+++ b/tests/nvme/013
@@ -32,12 +32,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/014 b/tests/nvme/014
index a33ff439fb3d..b61e7182af66 100755
--- a/tests/nvme/014
+++ b/tests/nvme/014
@@ -31,12 +31,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/015 b/tests/nvme/015
index cb9792e13442..05195e3bc598 100755
--- a/tests/nvme/015
+++ b/tests/nvme/015
@@ -28,12 +28,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/016 b/tests/nvme/016
index 1ad744abb9b0..a5ad973dc246 100755
--- a/tests/nvme/016
+++ b/tests/nvme/016
@@ -30,7 +30,7 @@ test() {
_create_nvmet_ns "${subsys_nqn}" "${i}" "${loop_dev}"
done
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "$port" "${subsys_nqn}"
_nvme_discover "loop" | _filter_discovery
diff --git a/tests/nvme/017 b/tests/nvme/017
index 2507bcd606b7..67d7ffc72e93 100755
--- a/tests/nvme/017
+++ b/tests/nvme/017
@@ -33,7 +33,7 @@ test() {
_create_nvmet_ns "${subsys_name}" "${i}" "${file_path}"
done
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
_nvme_discover "loop" | _filter_discovery
diff --git a/tests/nvme/018 b/tests/nvme/018
index 4863274cc525..43340d3c4d25 100755
--- a/tests/nvme/018
+++ b/tests/nvme/018
@@ -29,12 +29,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/019 b/tests/nvme/019
index 19c5b4755387..98d82ae21b42 100755
--- a/tests/nvme/019
+++ b/tests/nvme/019
@@ -33,12 +33,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/020 b/tests/nvme/020
index 0a817004225a..2d4c0152bc55 100755
--- a/tests/nvme/020
+++ b/tests/nvme/020
@@ -29,12 +29,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/021 b/tests/nvme/021
index ac3cbd17cd03..03b2ab749052 100755
--- a/tests/nvme/021
+++ b/tests/nvme/021
@@ -28,12 +28,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/022 b/tests/nvme/022
index 4c91f98734fc..977b844ee117 100755
--- a/tests/nvme/022
+++ b/tests/nvme/022
@@ -28,12 +28,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/023 b/tests/nvme/023
index dcbe821f2709..6c3b44174884 100755
--- a/tests/nvme/023
+++ b/tests/nvme/023
@@ -31,12 +31,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/024 b/tests/nvme/024
index 0f4bddcb3142..9b5f6a44a916 100755
--- a/tests/nvme/024
+++ b/tests/nvme/024
@@ -28,12 +28,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/025 b/tests/nvme/025
index 90896d327cff..9f0e9f722a02 100755
--- a/tests/nvme/025
+++ b/tests/nvme/025
@@ -28,12 +28,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/026 b/tests/nvme/026
index 39cfe12a23c7..e60e73b2c26a 100755
--- a/tests/nvme/026
+++ b/tests/nvme/026
@@ -28,12 +28,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/027 b/tests/nvme/027
index 5915c336a0cd..805a3c63eba2 100755
--- a/tests/nvme/027
+++ b/tests/nvme/027
@@ -28,12 +28,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/028 b/tests/nvme/028
index cf44102b3957..c9bd3dde7f20 100755
--- a/tests/nvme/028
+++ b/tests/nvme/028
@@ -28,16 +28,16 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
- if ! nvme list-subsys 2>> "$FULL" | grep -q loop; then
+ if ! nvme list-subsys 2>> "$FULL" | grep -q ${nvme_trtype}; then
echo "ERROR: list-subsys"
fi
_nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
diff --git a/tests/nvme/029 b/tests/nvme/029
index 192b5c52168c..7bf904b16edc 100755
--- a/tests/nvme/029
+++ b/tests/nvme/029
@@ -64,12 +64,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/030 b/tests/nvme/030
index 7156cad7b657..220b29f42962 100755
--- a/tests/nvme/030
+++ b/tests/nvme/030
@@ -37,7 +37,7 @@ test() {
_setup_nvmet
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_create_nvmet_subsystem "${subsys}1" "$(losetup -f)"
_add_nvmet_subsys_to_port "${port}" "${subsys}1"
diff --git a/tests/nvme/031 b/tests/nvme/031
index ab17633bc8fc..001f9d2b0b3a 100755
--- a/tests/nvme/031
+++ b/tests/nvme/031
@@ -36,12 +36,12 @@ test() {
loop_dev="$(losetup -f --show "$TMPDIR/img")"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
for ((i = 0; i < iterations; i++)); do
_create_nvmet_subsystem "${subsys}$i" "${loop_dev}"
_add_nvmet_subsys_to_port "${port}" "${subsys}$i"
- _nvme_connect_subsys "loop" "${subsys}$i"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys}$i"
_nvme_disconnect_subsys "${subsys}$i" >> "${FULL}" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys}$i"
_remove_nvmet_subsystem "${subsys}$i"
diff --git a/tests/nvme/rc b/tests/nvme/rc
index 6d57cf591300..191f0497416a 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -6,6 +6,9 @@
. common/rc
+def_traddr="127.0.0.1"
+def_adrfam="ipv4"
+def_trsvcid="4420"
nvme_trtype=${nvme_trtype:-"loop"}
_nvme_requires() {
@@ -62,8 +65,8 @@ _cleanup_nvmet() {
for dev in /sys/class/nvme/nvme*; do
dev="$(basename "$dev")"
transport="$(cat "/sys/class/nvme/${dev}/transport")"
- if [[ "$transport" == "loop" ]]; then
- echo "WARNING: Test did not clean up loop device: ${dev}"
+ if [[ "$transport" == "${nvme_trtype}" ]]; then
+ echo "WARNING: Test did not clean up ${nvme_trtype} device: ${dev}"
_nvme_disconnect_ctrl "${dev}"
fi
done
@@ -87,14 +90,20 @@ _cleanup_nvmet() {
shopt -u nullglob
trap SIGINT
- modprobe -r nvme-loop 2>/dev/null
+ modprobe -r nvme-${nvme_trtype} 2>/dev/null
+ if [[ "${nvme_trtype}" != "loop" ]]; then
+ modprobe -r nvmet-${nvme_trtype} 2>/dev/null
+ fi
modprobe -r nvmet 2>/dev/null
}
_setup_nvmet() {
_register_test_cleanup _cleanup_nvmet
modprobe nvmet
- modprobe nvme-loop
+ if [[ "${nvme_trtype}" != "loop" ]]; then
+ modprobe nvmet-${nvme_trtype}
+ fi
+ modprobe nvme-${nvme_trtype}
}
_nvme_disconnect_ctrl() {
@@ -112,20 +121,33 @@ _nvme_disconnect_subsys() {
_nvme_connect_subsys() {
local trtype="$1"
local subsysnqn="$2"
+ local traddr="${3:-$def_traddr}"
+ local trsvcid="${4:-$def_trsvcid}"
cmd="nvme connect -t ${trtype} -n ${subsysnqn}"
+ if [[ "${trtype}" != "loop" ]]; then
+ cmd=$cmd" -a ${traddr} -s ${trsvcid}"
+ fi
eval $cmd
}
_nvme_discover() {
local trtype="$1"
+ local traddr="${2:-$def_traddr}"
+ local trsvcid="${3:-$def_trsvcid}"
cmd="nvme discover -t ${trtype}"
+ if [[ "${trtype}" != "loop" ]]; then
+ cmd=$cmd" -a ${traddr} -s ${trsvcid}"
+ fi
eval $cmd
}
_create_nvmet_port() {
local trtype="$1"
+ local traddr="${2:-$def_traddr}"
+ local adrfam="${3:-$def_adrfam}"
+ local trsvcid="${4:-$def_trsvcid}"
local port
for ((port = 0; ; port++)); do
@@ -136,6 +158,9 @@ _create_nvmet_port() {
mkdir "${NVMET_CFS}/ports/${port}"
echo "${trtype}" > "${NVMET_CFS}/ports/${port}/addr_trtype"
+ echo "${traddr}" > "${NVMET_CFS}/ports/${port}/addr_traddr"
+ echo "${adrfam}" > "${NVMET_CFS}/ports/${port}/addr_adrfam"
+ echo "${trsvcid}" > "${NVMET_CFS}/ports/${port}/addr_trsvcid"
echo "${port}"
}
@@ -207,13 +232,13 @@ _remove_nvmet_subsystem_from_port() {
rm "${NVMET_CFS}/ports/${port}/subsystems/${nvmet_subsystem}"
}
-_find_nvme_loop_dev() {
+_find_nvme_dev() {
local dev
local transport
for dev in /sys/class/nvme/nvme*; do
dev="$(basename "$dev")"
transport="$(cat "/sys/class/nvme/${dev}/transport")"
- if [[ "$transport" == "loop" ]]; then
+ if [[ "$transport" == "${nvme_trtype}" ]]; then
echo "$dev"
for ((i = 0; i < 10; i++)); do
if [[ -e /sys/block/$dev/uuid &&
@@ -233,6 +258,6 @@ _filter_discovery() {
}
_discovery_genctr() {
- _nvme_discover "loop" |
+ _nvme_discover "${nvme_trtype}" |
sed -n -e 's/^.*Generation counter \([0-9]\+\).*$/\1/p'
}
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v3 3/7] nvme: make tests transport type agnostic
@ 2020-08-11 21:00 ` Sagi Grimberg
0 siblings, 0 replies; 28+ messages in thread
From: Sagi Grimberg @ 2020-08-11 21:00 UTC (permalink / raw)
To: linux-nvme, linux-block, Omar Sandoval
Cc: Keith Busch, Christoph Hellwig, Chaitanya Kulkarni, Bart Van Assche
Pass in nvme_trtype to common routines that can
support multiple transport types.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
---
tests/nvme/002 | 4 ++--
tests/nvme/003 | 4 ++--
tests/nvme/004 | 6 +++---
tests/nvme/005 | 6 +++---
tests/nvme/006 | 2 +-
tests/nvme/007 | 2 +-
tests/nvme/008 | 6 +++---
tests/nvme/009 | 6 +++---
tests/nvme/010 | 6 +++---
tests/nvme/011 | 6 +++---
tests/nvme/012 | 6 +++---
tests/nvme/013 | 6 +++---
tests/nvme/014 | 6 +++---
tests/nvme/015 | 6 +++---
tests/nvme/016 | 2 +-
tests/nvme/017 | 2 +-
tests/nvme/018 | 6 +++---
tests/nvme/019 | 6 +++---
tests/nvme/020 | 6 +++---
tests/nvme/021 | 6 +++---
tests/nvme/022 | 6 +++---
tests/nvme/023 | 6 +++---
tests/nvme/024 | 6 +++---
tests/nvme/025 | 6 +++---
tests/nvme/026 | 6 +++---
tests/nvme/027 | 6 +++---
tests/nvme/028 | 8 ++++----
tests/nvme/029 | 6 +++---
tests/nvme/030 | 2 +-
tests/nvme/031 | 4 ++--
tests/nvme/rc | 39 ++++++++++++++++++++++++++++++++-------
31 files changed, 110 insertions(+), 85 deletions(-)
diff --git a/tests/nvme/002 b/tests/nvme/002
index 999e222705bf..8540623497c7 100755
--- a/tests/nvme/002
+++ b/tests/nvme/002
@@ -21,7 +21,7 @@ test() {
local iterations=1000
local port
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
local loop_dev
loop_dev="$(losetup -f)"
@@ -31,7 +31,7 @@ test() {
_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-$i"
done
- _nvme_discover "loop" | _filter_discovery
+ _nvme_discover "${nvme_trtype}" | _filter_discovery
for ((i = iterations - 1; i >= 0; i--)); do
_remove_nvmet_subsystem_from_port "${port}" "blktests-subsystem-$i"
diff --git a/tests/nvme/003 b/tests/nvme/003
index 6ea6a23b7942..68f823011d7d 100755
--- a/tests/nvme/003
+++ b/tests/nvme/003
@@ -21,7 +21,7 @@ test() {
_setup_nvmet
local port
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port "${nvme_trtype}")"
local loop_dev
loop_dev="$(losetup -f)"
@@ -29,7 +29,7 @@ test() {
_create_nvmet_subsystem "blktests-subsystem-1" "${loop_dev}"
_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-1"
- _nvme_connect_subsys "loop" "nqn.2014-08.org.nvmexpress.discovery"
+ _nvme_connect_subsys "${nvme_trtype}" "nqn.2014-08.org.nvmexpress.discovery"
# This is ugly but checking for the absence of error messages is ...
sleep 10
diff --git a/tests/nvme/004 b/tests/nvme/004
index 7ea539fda55e..af434674beaa 100755
--- a/tests/nvme/004
+++ b/tests/nvme/004
@@ -22,7 +22,7 @@ test() {
_setup_nvmet
local port
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
truncate -s 1G "$TMPDIR/img"
@@ -33,10 +33,10 @@ test() {
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-1"
- _nvme_connect_subsys "loop" "blktests-subsystem-1"
+ _nvme_connect_subsys ${nvme_trtype} "blktests-subsystem-1"
local nvmedev
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/005 b/tests/nvme/005
index d4ce6d703c1b..ff0975ce7c28 100755
--- a/tests/nvme/005
+++ b/tests/nvme/005
@@ -22,7 +22,7 @@ test() {
_setup_nvmet
local port
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
truncate -s 1G "$TMPDIR/img"
@@ -33,10 +33,10 @@ test() {
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
_add_nvmet_subsys_to_port "${port}" "blktests-subsystem-1"
- _nvme_connect_subsys "loop" "blktests-subsystem-1"
+ _nvme_connect_subsys ${nvme_trtype} "blktests-subsystem-1"
local nvmedev
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
udevadm settle
diff --git a/tests/nvme/006 b/tests/nvme/006
index 3f47613d52d2..3f161d08bc22 100755
--- a/tests/nvme/006
+++ b/tests/nvme/006
@@ -29,7 +29,7 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
diff --git a/tests/nvme/007 b/tests/nvme/007
index 0902745a4ab2..b0e61186e886 100755
--- a/tests/nvme/007
+++ b/tests/nvme/007
@@ -28,7 +28,7 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
_remove_nvmet_subsystem_from_port "${port}" "${subsys_name}"
diff --git a/tests/nvme/008 b/tests/nvme/008
index 5ab5c49b2039..7ffac945a58a 100755
--- a/tests/nvme/008
+++ b/tests/nvme/008
@@ -31,12 +31,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/009 b/tests/nvme/009
index f6b999dea541..9ac5cb479983 100755
--- a/tests/nvme/009
+++ b/tests/nvme/009
@@ -27,12 +27,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/010 b/tests/nvme/010
index 6caa2d0f813d..d90ca9d88053 100755
--- a/tests/nvme/010
+++ b/tests/nvme/010
@@ -31,12 +31,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/011 b/tests/nvme/011
index 7a5535982a74..d8badbc00846 100755
--- a/tests/nvme/011
+++ b/tests/nvme/011
@@ -29,12 +29,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/012 b/tests/nvme/012
index 5c3477a16af9..93b6cfaf4c77 100755
--- a/tests/nvme/012
+++ b/tests/nvme/012
@@ -35,12 +35,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/013 b/tests/nvme/013
index 49784a0d46b5..3bae2f5edb3d 100755
--- a/tests/nvme/013
+++ b/tests/nvme/013
@@ -32,12 +32,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/014 b/tests/nvme/014
index a33ff439fb3d..b61e7182af66 100755
--- a/tests/nvme/014
+++ b/tests/nvme/014
@@ -31,12 +31,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/015 b/tests/nvme/015
index cb9792e13442..05195e3bc598 100755
--- a/tests/nvme/015
+++ b/tests/nvme/015
@@ -28,12 +28,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/016 b/tests/nvme/016
index 1ad744abb9b0..a5ad973dc246 100755
--- a/tests/nvme/016
+++ b/tests/nvme/016
@@ -30,7 +30,7 @@ test() {
_create_nvmet_ns "${subsys_nqn}" "${i}" "${loop_dev}"
done
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "$port" "${subsys_nqn}"
_nvme_discover "loop" | _filter_discovery
diff --git a/tests/nvme/017 b/tests/nvme/017
index 2507bcd606b7..67d7ffc72e93 100755
--- a/tests/nvme/017
+++ b/tests/nvme/017
@@ -33,7 +33,7 @@ test() {
_create_nvmet_ns "${subsys_name}" "${i}" "${file_path}"
done
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
_nvme_discover "loop" | _filter_discovery
diff --git a/tests/nvme/018 b/tests/nvme/018
index 4863274cc525..43340d3c4d25 100755
--- a/tests/nvme/018
+++ b/tests/nvme/018
@@ -29,12 +29,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/019 b/tests/nvme/019
index 19c5b4755387..98d82ae21b42 100755
--- a/tests/nvme/019
+++ b/tests/nvme/019
@@ -33,12 +33,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/020 b/tests/nvme/020
index 0a817004225a..2d4c0152bc55 100755
--- a/tests/nvme/020
+++ b/tests/nvme/020
@@ -29,12 +29,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/021 b/tests/nvme/021
index ac3cbd17cd03..03b2ab749052 100755
--- a/tests/nvme/021
+++ b/tests/nvme/021
@@ -28,12 +28,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/022 b/tests/nvme/022
index 4c91f98734fc..977b844ee117 100755
--- a/tests/nvme/022
+++ b/tests/nvme/022
@@ -28,12 +28,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/023 b/tests/nvme/023
index dcbe821f2709..6c3b44174884 100755
--- a/tests/nvme/023
+++ b/tests/nvme/023
@@ -31,12 +31,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/024 b/tests/nvme/024
index 0f4bddcb3142..9b5f6a44a916 100755
--- a/tests/nvme/024
+++ b/tests/nvme/024
@@ -28,12 +28,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/025 b/tests/nvme/025
index 90896d327cff..9f0e9f722a02 100755
--- a/tests/nvme/025
+++ b/tests/nvme/025
@@ -28,12 +28,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/026 b/tests/nvme/026
index 39cfe12a23c7..e60e73b2c26a 100755
--- a/tests/nvme/026
+++ b/tests/nvme/026
@@ -28,12 +28,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/027 b/tests/nvme/027
index 5915c336a0cd..805a3c63eba2 100755
--- a/tests/nvme/027
+++ b/tests/nvme/027
@@ -28,12 +28,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/028 b/tests/nvme/028
index cf44102b3957..c9bd3dde7f20 100755
--- a/tests/nvme/028
+++ b/tests/nvme/028
@@ -28,16 +28,16 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${file_path}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
- if ! nvme list-subsys 2>> "$FULL" | grep -q loop; then
+ if ! nvme list-subsys 2>> "$FULL" | grep -q ${nvme_trtype}; then
echo "ERROR: list-subsys"
fi
_nvme_disconnect_subsys "${subsys_name}" >> "$FULL" 2>&1
diff --git a/tests/nvme/029 b/tests/nvme/029
index 192b5c52168c..7bf904b16edc 100755
--- a/tests/nvme/029
+++ b/tests/nvme/029
@@ -64,12 +64,12 @@ test() {
_create_nvmet_subsystem "${subsys_name}" "${loop_dev}" \
"91fdba0d-f87b-4c25-b80f-db7be1418b9e"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_add_nvmet_subsys_to_port "${port}" "${subsys_name}"
- _nvme_connect_subsys "loop" "${subsys_name}"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys_name}"
- nvmedev="$(_find_nvme_loop_dev)"
+ nvmedev="$(_find_nvme_dev)"
cat "/sys/block/${nvmedev}n1/uuid"
cat "/sys/block/${nvmedev}n1/wwid"
diff --git a/tests/nvme/030 b/tests/nvme/030
index 7156cad7b657..220b29f42962 100755
--- a/tests/nvme/030
+++ b/tests/nvme/030
@@ -37,7 +37,7 @@ test() {
_setup_nvmet
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
_create_nvmet_subsystem "${subsys}1" "$(losetup -f)"
_add_nvmet_subsys_to_port "${port}" "${subsys}1"
diff --git a/tests/nvme/031 b/tests/nvme/031
index ab17633bc8fc..001f9d2b0b3a 100755
--- a/tests/nvme/031
+++ b/tests/nvme/031
@@ -36,12 +36,12 @@ test() {
loop_dev="$(losetup -f --show "$TMPDIR/img")"
- port="$(_create_nvmet_port "loop")"
+ port="$(_create_nvmet_port ${nvme_trtype})"
for ((i = 0; i < iterations; i++)); do
_create_nvmet_subsystem "${subsys}$i" "${loop_dev}"
_add_nvmet_subsys_to_port "${port}" "${subsys}$i"
- _nvme_connect_subsys "loop" "${subsys}$i"
+ _nvme_connect_subsys ${nvme_trtype} "${subsys}$i"
_nvme_disconnect_subsys "${subsys}$i" >> "${FULL}" 2>&1
_remove_nvmet_subsystem_from_port "${port}" "${subsys}$i"
_remove_nvmet_subsystem "${subsys}$i"
diff --git a/tests/nvme/rc b/tests/nvme/rc
index 6d57cf591300..191f0497416a 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -6,6 +6,9 @@
. common/rc
+def_traddr="127.0.0.1"
+def_adrfam="ipv4"
+def_trsvcid="4420"
nvme_trtype=${nvme_trtype:-"loop"}
_nvme_requires() {
@@ -62,8 +65,8 @@ _cleanup_nvmet() {
for dev in /sys/class/nvme/nvme*; do
dev="$(basename "$dev")"
transport="$(cat "/sys/class/nvme/${dev}/transport")"
- if [[ "$transport" == "loop" ]]; then
- echo "WARNING: Test did not clean up loop device: ${dev}"
+ if [[ "$transport" == "${nvme_trtype}" ]]; then
+ echo "WARNING: Test did not clean up ${nvme_trtype} device: ${dev}"
_nvme_disconnect_ctrl "${dev}"
fi
done
@@ -87,14 +90,20 @@ _cleanup_nvmet() {
shopt -u nullglob
trap SIGINT
- modprobe -r nvme-loop 2>/dev/null
+ modprobe -r nvme-${nvme_trtype} 2>/dev/null
+ if [[ "${nvme_trtype}" != "loop" ]]; then
+ modprobe -r nvmet-${nvme_trtype} 2>/dev/null
+ fi
modprobe -r nvmet 2>/dev/null
}
_setup_nvmet() {
_register_test_cleanup _cleanup_nvmet
modprobe nvmet
- modprobe nvme-loop
+ if [[ "${nvme_trtype}" != "loop" ]]; then
+ modprobe nvmet-${nvme_trtype}
+ fi
+ modprobe nvme-${nvme_trtype}
}
_nvme_disconnect_ctrl() {
@@ -112,20 +121,33 @@ _nvme_disconnect_subsys() {
_nvme_connect_subsys() {
local trtype="$1"
local subsysnqn="$2"
+ local traddr="${3:-$def_traddr}"
+ local trsvcid="${4:-$def_trsvcid}"
cmd="nvme connect -t ${trtype} -n ${subsysnqn}"
+ if [[ "${trtype}" != "loop" ]]; then
+ cmd=$cmd" -a ${traddr} -s ${trsvcid}"
+ fi
eval $cmd
}
_nvme_discover() {
local trtype="$1"
+ local traddr="${2:-$def_traddr}"
+ local trsvcid="${3:-$def_trsvcid}"
cmd="nvme discover -t ${trtype}"
+ if [[ "${trtype}" != "loop" ]]; then
+ cmd=$cmd" -a ${traddr} -s ${trsvcid}"
+ fi
eval $cmd
}
_create_nvmet_port() {
local trtype="$1"
+ local traddr="${2:-$def_traddr}"
+ local adrfam="${3:-$def_adrfam}"
+ local trsvcid="${4:-$def_trsvcid}"
local port
for ((port = 0; ; port++)); do
@@ -136,6 +158,9 @@ _create_nvmet_port() {
mkdir "${NVMET_CFS}/ports/${port}"
echo "${trtype}" > "${NVMET_CFS}/ports/${port}/addr_trtype"
+ echo "${traddr}" > "${NVMET_CFS}/ports/${port}/addr_traddr"
+ echo "${adrfam}" > "${NVMET_CFS}/ports/${port}/addr_adrfam"
+ echo "${trsvcid}" > "${NVMET_CFS}/ports/${port}/addr_trsvcid"
echo "${port}"
}
@@ -207,13 +232,13 @@ _remove_nvmet_subsystem_from_port() {
rm "${NVMET_CFS}/ports/${port}/subsystems/${nvmet_subsystem}"
}
-_find_nvme_loop_dev() {
+_find_nvme_dev() {
local dev
local transport
for dev in /sys/class/nvme/nvme*; do
dev="$(basename "$dev")"
transport="$(cat "/sys/class/nvme/${dev}/transport")"
- if [[ "$transport" == "loop" ]]; then
+ if [[ "$transport" == "${nvme_trtype}" ]]; then
echo "$dev"
for ((i = 0; i < 10; i++)); do
if [[ -e /sys/block/$dev/uuid &&
@@ -233,6 +258,6 @@ _filter_discovery() {
}
_discovery_genctr() {
- _nvme_discover "loop" |
+ _nvme_discover "${nvme_trtype}" |
sed -n -e 's/^.*Generation counter \([0-9]\+\).*$/\1/p'
}
--
2.25.1
_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v3 4/7] tests/nvme: restrict tests to specific transports
2020-08-11 21:00 ` Sagi Grimberg
@ 2020-08-11 21:00 ` Sagi Grimberg
-1 siblings, 0 replies; 28+ messages in thread
From: Sagi Grimberg @ 2020-08-11 21:00 UTC (permalink / raw)
To: linux-nvme, linux-block, Omar Sandoval
Cc: Chaitanya Kulkarni, Christoph Hellwig, Keith Busch, Bart Van Assche
Protect against running tests with the wrong transport type. Most tests
cannot have nvme_trtype=nvme and discovery tests expect the $trtype to
be written and verified in the .out file. Adding a couple of helpers
to restrict the transport types in tests.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
---
tests/nvme/002 | 1 +
tests/nvme/003 | 1 +
tests/nvme/004 | 1 +
tests/nvme/005 | 1 +
tests/nvme/006 | 1 +
tests/nvme/007 | 1 +
tests/nvme/008 | 1 +
tests/nvme/009 | 1 +
tests/nvme/010 | 1 +
tests/nvme/011 | 1 +
tests/nvme/012 | 1 +
tests/nvme/013 | 1 +
tests/nvme/014 | 1 +
tests/nvme/015 | 1 +
tests/nvme/016 | 1 +
tests/nvme/017 | 1 +
tests/nvme/018 | 1 +
tests/nvme/019 | 1 +
tests/nvme/020 | 1 +
tests/nvme/021 | 1 +
tests/nvme/022 | 1 +
tests/nvme/023 | 1 +
tests/nvme/024 | 1 +
tests/nvme/025 | 1 +
tests/nvme/026 | 1 +
tests/nvme/027 | 1 +
tests/nvme/028 | 1 +
tests/nvme/029 | 1 +
tests/nvme/030 | 1 +
tests/nvme/031 | 1 +
tests/nvme/rc | 16 ++++++++++++++++
31 files changed, 46 insertions(+)
diff --git a/tests/nvme/002 b/tests/nvme/002
index 8540623497c7..8cfcb75e5142 100755
--- a/tests/nvme/002
+++ b/tests/nvme/002
@@ -12,6 +12,7 @@ DESCRIPTION="create many subsystems and test discovery"
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_loop
}
test() {
diff --git a/tests/nvme/003 b/tests/nvme/003
index 68f823011d7d..5f695c27fe78 100755
--- a/tests/nvme/003
+++ b/tests/nvme/003
@@ -13,6 +13,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/004 b/tests/nvme/004
index af434674beaa..03ccd1e4e6b4 100755
--- a/tests/nvme/004
+++ b/tests/nvme/004
@@ -14,6 +14,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/005 b/tests/nvme/005
index ff0975ce7c28..7081faebb801 100755
--- a/tests/nvme/005
+++ b/tests/nvme/005
@@ -14,6 +14,7 @@ requires() {
_nvme_requires
_have_modules loop && \
_have_module_param_value nvme_core multipath Y
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/006 b/tests/nvme/006
index 3f161d08bc22..1137ab9c43fa 100755
--- a/tests/nvme/006
+++ b/tests/nvme/006
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/007 b/tests/nvme/007
index b0e61186e886..106775e65d84 100755
--- a/tests/nvme/007
+++ b/tests/nvme/007
@@ -11,6 +11,7 @@ QUICK=1
requires() {
_nvme_requires
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/008 b/tests/nvme/008
index 7ffac945a58a..fbba7ff59aec 100755
--- a/tests/nvme/008
+++ b/tests/nvme/008
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/009 b/tests/nvme/009
index 9ac5cb479983..39a216dc7822 100755
--- a/tests/nvme/009
+++ b/tests/nvme/009
@@ -11,6 +11,7 @@ QUICK=1
requires() {
_nvme_requires
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/010 b/tests/nvme/010
index d90ca9d88053..02b653bc993b 100755
--- a/tests/nvme/010
+++ b/tests/nvme/010
@@ -12,6 +12,7 @@ TIMED=1
requires() {
_nvme_requires
_have_fio _have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/011 b/tests/nvme/011
index d8badbc00846..349ac080f58c 100755
--- a/tests/nvme/011
+++ b/tests/nvme/011
@@ -12,6 +12,7 @@ TIMED=1
requires() {
_nvme_requires
_have_fio
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/012 b/tests/nvme/012
index 93b6cfaf4c77..c64ad491266f 100755
--- a/tests/nvme/012
+++ b/tests/nvme/012
@@ -13,6 +13,7 @@ requires() {
_nvme_requires
_have_program mkfs.xfs && _have_program fio && \
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/013 b/tests/nvme/013
index 3bae2f5edb3d..b9452d8061ec 100755
--- a/tests/nvme/013
+++ b/tests/nvme/013
@@ -12,6 +12,7 @@ TIMED=1
requires() {
_nvme_requires
_have_program mkfs.xfs && _have_fio
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/014 b/tests/nvme/014
index b61e7182af66..40cb1615bef0 100755
--- a/tests/nvme/014
+++ b/tests/nvme/014
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/015 b/tests/nvme/015
index 05195e3bc598..b57680e7286e 100755
--- a/tests/nvme/015
+++ b/tests/nvme/015
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/016 b/tests/nvme/016
index a5ad973dc246..8ba0a895fbff 100755
--- a/tests/nvme/016
+++ b/tests/nvme/016
@@ -10,6 +10,7 @@ DESCRIPTION="create/delete many NVMeOF block device-backed ns and test discovery
requires() {
_nvme_requires
+ _require_nvme_trtype_is_loop
}
test() {
diff --git a/tests/nvme/017 b/tests/nvme/017
index 67d7ffc72e93..36b14f677449 100755
--- a/tests/nvme/017
+++ b/tests/nvme/017
@@ -10,6 +10,7 @@ DESCRIPTION="create/delete many file-ns and test discovery"
requires() {
_nvme_requires
+ _require_nvme_trtype_is_loop
}
test() {
diff --git a/tests/nvme/018 b/tests/nvme/018
index 43340d3c4d25..e4cd79350971 100755
--- a/tests/nvme/018
+++ b/tests/nvme/018
@@ -13,6 +13,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/019 b/tests/nvme/019
index 98d82ae21b42..a697c3ac3d02 100755
--- a/tests/nvme/019
+++ b/tests/nvme/019
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/020 b/tests/nvme/020
index 2d4c0152bc55..6d7d5c99410d 100755
--- a/tests/nvme/020
+++ b/tests/nvme/020
@@ -11,6 +11,7 @@ QUICK=1
requires() {
_nvme_requires
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/021 b/tests/nvme/021
index 03b2ab749052..5a60ad4c8744 100755
--- a/tests/nvme/021
+++ b/tests/nvme/021
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/022 b/tests/nvme/022
index 977b844ee117..2cd224fcfa22 100755
--- a/tests/nvme/022
+++ b/tests/nvme/022
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/023 b/tests/nvme/023
index 6c3b44174884..07b48a3c1bb5 100755
--- a/tests/nvme/023
+++ b/tests/nvme/023
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/024 b/tests/nvme/024
index 9b5f6a44a916..14c331cd377a 100755
--- a/tests/nvme/024
+++ b/tests/nvme/024
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/025 b/tests/nvme/025
index 9f0e9f722a02..21b033c9c2a8 100755
--- a/tests/nvme/025
+++ b/tests/nvme/025
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/026 b/tests/nvme/026
index e60e73b2c26a..77f7043c8e4a 100755
--- a/tests/nvme/026
+++ b/tests/nvme/026
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/027 b/tests/nvme/027
index 805a3c63eba2..f950422824bb 100755
--- a/tests/nvme/027
+++ b/tests/nvme/027
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/028 b/tests/nvme/028
index c9bd3dde7f20..10e13b4de922 100755
--- a/tests/nvme/028
+++ b/tests/nvme/028
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/029 b/tests/nvme/029
index 7bf904b16edc..c871fb48fc0f 100755
--- a/tests/nvme/029
+++ b/tests/nvme/029
@@ -13,6 +13,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test_user_io()
diff --git a/tests/nvme/030 b/tests/nvme/030
index 220b29f42962..314f39e93de2 100755
--- a/tests/nvme/030
+++ b/tests/nvme/030
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
diff --git a/tests/nvme/031 b/tests/nvme/031
index 001f9d2b0b3a..1df4dfd6cb9a 100755
--- a/tests/nvme/031
+++ b/tests/nvme/031
@@ -20,6 +20,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/rc b/tests/nvme/rc
index 191f0497416a..306a12440c20 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -46,6 +46,22 @@ _require_test_dev_is_nvme() {
return 0
}
+_require_nvme_trtype_is_loop() {
+ if [[ "${nvme_trtype}" != "loop" ]]; then
+ SKIP_REASON="nvme_trtype=${nvme_trtype} is not supported in this test"
+ return 1
+ fi
+ return 0
+}
+
+_require_nvme_trtype_is_fabrics() {
+ if [[ "${nvme_trtype}" == "pci" ]]; then
+ SKIP_REASON="nvme_trtype=${nvme_trtype} is not supported in this test"
+ return 1
+ fi
+ return 0
+}
+
_cleanup_nvmet() {
local dev
local port
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v3 4/7] tests/nvme: restrict tests to specific transports
@ 2020-08-11 21:00 ` Sagi Grimberg
0 siblings, 0 replies; 28+ messages in thread
From: Sagi Grimberg @ 2020-08-11 21:00 UTC (permalink / raw)
To: linux-nvme, linux-block, Omar Sandoval
Cc: Keith Busch, Christoph Hellwig, Chaitanya Kulkarni, Bart Van Assche
Protect against running tests with the wrong transport type. Most tests
cannot have nvme_trtype=nvme and discovery tests expect the $trtype to
be written and verified in the .out file. Adding a couple of helpers
to restrict the transport types in tests.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
---
tests/nvme/002 | 1 +
tests/nvme/003 | 1 +
tests/nvme/004 | 1 +
tests/nvme/005 | 1 +
tests/nvme/006 | 1 +
tests/nvme/007 | 1 +
tests/nvme/008 | 1 +
tests/nvme/009 | 1 +
tests/nvme/010 | 1 +
tests/nvme/011 | 1 +
tests/nvme/012 | 1 +
tests/nvme/013 | 1 +
tests/nvme/014 | 1 +
tests/nvme/015 | 1 +
tests/nvme/016 | 1 +
tests/nvme/017 | 1 +
tests/nvme/018 | 1 +
tests/nvme/019 | 1 +
tests/nvme/020 | 1 +
tests/nvme/021 | 1 +
tests/nvme/022 | 1 +
tests/nvme/023 | 1 +
tests/nvme/024 | 1 +
tests/nvme/025 | 1 +
tests/nvme/026 | 1 +
tests/nvme/027 | 1 +
tests/nvme/028 | 1 +
tests/nvme/029 | 1 +
tests/nvme/030 | 1 +
tests/nvme/031 | 1 +
tests/nvme/rc | 16 ++++++++++++++++
31 files changed, 46 insertions(+)
diff --git a/tests/nvme/002 b/tests/nvme/002
index 8540623497c7..8cfcb75e5142 100755
--- a/tests/nvme/002
+++ b/tests/nvme/002
@@ -12,6 +12,7 @@ DESCRIPTION="create many subsystems and test discovery"
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_loop
}
test() {
diff --git a/tests/nvme/003 b/tests/nvme/003
index 68f823011d7d..5f695c27fe78 100755
--- a/tests/nvme/003
+++ b/tests/nvme/003
@@ -13,6 +13,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/004 b/tests/nvme/004
index af434674beaa..03ccd1e4e6b4 100755
--- a/tests/nvme/004
+++ b/tests/nvme/004
@@ -14,6 +14,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/005 b/tests/nvme/005
index ff0975ce7c28..7081faebb801 100755
--- a/tests/nvme/005
+++ b/tests/nvme/005
@@ -14,6 +14,7 @@ requires() {
_nvme_requires
_have_modules loop && \
_have_module_param_value nvme_core multipath Y
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/006 b/tests/nvme/006
index 3f161d08bc22..1137ab9c43fa 100755
--- a/tests/nvme/006
+++ b/tests/nvme/006
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/007 b/tests/nvme/007
index b0e61186e886..106775e65d84 100755
--- a/tests/nvme/007
+++ b/tests/nvme/007
@@ -11,6 +11,7 @@ QUICK=1
requires() {
_nvme_requires
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/008 b/tests/nvme/008
index 7ffac945a58a..fbba7ff59aec 100755
--- a/tests/nvme/008
+++ b/tests/nvme/008
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/009 b/tests/nvme/009
index 9ac5cb479983..39a216dc7822 100755
--- a/tests/nvme/009
+++ b/tests/nvme/009
@@ -11,6 +11,7 @@ QUICK=1
requires() {
_nvme_requires
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/010 b/tests/nvme/010
index d90ca9d88053..02b653bc993b 100755
--- a/tests/nvme/010
+++ b/tests/nvme/010
@@ -12,6 +12,7 @@ TIMED=1
requires() {
_nvme_requires
_have_fio _have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/011 b/tests/nvme/011
index d8badbc00846..349ac080f58c 100755
--- a/tests/nvme/011
+++ b/tests/nvme/011
@@ -12,6 +12,7 @@ TIMED=1
requires() {
_nvme_requires
_have_fio
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/012 b/tests/nvme/012
index 93b6cfaf4c77..c64ad491266f 100755
--- a/tests/nvme/012
+++ b/tests/nvme/012
@@ -13,6 +13,7 @@ requires() {
_nvme_requires
_have_program mkfs.xfs && _have_program fio && \
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/013 b/tests/nvme/013
index 3bae2f5edb3d..b9452d8061ec 100755
--- a/tests/nvme/013
+++ b/tests/nvme/013
@@ -12,6 +12,7 @@ TIMED=1
requires() {
_nvme_requires
_have_program mkfs.xfs && _have_fio
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/014 b/tests/nvme/014
index b61e7182af66..40cb1615bef0 100755
--- a/tests/nvme/014
+++ b/tests/nvme/014
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/015 b/tests/nvme/015
index 05195e3bc598..b57680e7286e 100755
--- a/tests/nvme/015
+++ b/tests/nvme/015
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/016 b/tests/nvme/016
index a5ad973dc246..8ba0a895fbff 100755
--- a/tests/nvme/016
+++ b/tests/nvme/016
@@ -10,6 +10,7 @@ DESCRIPTION="create/delete many NVMeOF block device-backed ns and test discovery
requires() {
_nvme_requires
+ _require_nvme_trtype_is_loop
}
test() {
diff --git a/tests/nvme/017 b/tests/nvme/017
index 67d7ffc72e93..36b14f677449 100755
--- a/tests/nvme/017
+++ b/tests/nvme/017
@@ -10,6 +10,7 @@ DESCRIPTION="create/delete many file-ns and test discovery"
requires() {
_nvme_requires
+ _require_nvme_trtype_is_loop
}
test() {
diff --git a/tests/nvme/018 b/tests/nvme/018
index 43340d3c4d25..e4cd79350971 100755
--- a/tests/nvme/018
+++ b/tests/nvme/018
@@ -13,6 +13,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/019 b/tests/nvme/019
index 98d82ae21b42..a697c3ac3d02 100755
--- a/tests/nvme/019
+++ b/tests/nvme/019
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/020 b/tests/nvme/020
index 2d4c0152bc55..6d7d5c99410d 100755
--- a/tests/nvme/020
+++ b/tests/nvme/020
@@ -11,6 +11,7 @@ QUICK=1
requires() {
_nvme_requires
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/021 b/tests/nvme/021
index 03b2ab749052..5a60ad4c8744 100755
--- a/tests/nvme/021
+++ b/tests/nvme/021
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/022 b/tests/nvme/022
index 977b844ee117..2cd224fcfa22 100755
--- a/tests/nvme/022
+++ b/tests/nvme/022
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/023 b/tests/nvme/023
index 6c3b44174884..07b48a3c1bb5 100755
--- a/tests/nvme/023
+++ b/tests/nvme/023
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/024 b/tests/nvme/024
index 9b5f6a44a916..14c331cd377a 100755
--- a/tests/nvme/024
+++ b/tests/nvme/024
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/025 b/tests/nvme/025
index 9f0e9f722a02..21b033c9c2a8 100755
--- a/tests/nvme/025
+++ b/tests/nvme/025
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/026 b/tests/nvme/026
index e60e73b2c26a..77f7043c8e4a 100755
--- a/tests/nvme/026
+++ b/tests/nvme/026
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/027 b/tests/nvme/027
index 805a3c63eba2..f950422824bb 100755
--- a/tests/nvme/027
+++ b/tests/nvme/027
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/028 b/tests/nvme/028
index c9bd3dde7f20..10e13b4de922 100755
--- a/tests/nvme/028
+++ b/tests/nvme/028
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/029 b/tests/nvme/029
index 7bf904b16edc..c871fb48fc0f 100755
--- a/tests/nvme/029
+++ b/tests/nvme/029
@@ -13,6 +13,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test_user_io()
diff --git a/tests/nvme/030 b/tests/nvme/030
index 220b29f42962..314f39e93de2 100755
--- a/tests/nvme/030
+++ b/tests/nvme/030
@@ -12,6 +12,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
diff --git a/tests/nvme/031 b/tests/nvme/031
index 001f9d2b0b3a..1df4dfd6cb9a 100755
--- a/tests/nvme/031
+++ b/tests/nvme/031
@@ -20,6 +20,7 @@ QUICK=1
requires() {
_nvme_requires
_have_modules loop
+ _require_nvme_trtype_is_fabrics
}
test() {
diff --git a/tests/nvme/rc b/tests/nvme/rc
index 191f0497416a..306a12440c20 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -46,6 +46,22 @@ _require_test_dev_is_nvme() {
return 0
}
+_require_nvme_trtype_is_loop() {
+ if [[ "${nvme_trtype}" != "loop" ]]; then
+ SKIP_REASON="nvme_trtype=${nvme_trtype} is not supported in this test"
+ return 1
+ fi
+ return 0
+}
+
+_require_nvme_trtype_is_fabrics() {
+ if [[ "${nvme_trtype}" == "pci" ]]; then
+ SKIP_REASON="nvme_trtype=${nvme_trtype} is not supported in this test"
+ return 1
+ fi
+ return 0
+}
+
_cleanup_nvmet() {
local dev
local port
--
2.25.1
_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v3 5/7] nvme: support nvme-tcp when runinng tests
2020-08-11 21:00 ` Sagi Grimberg
@ 2020-08-11 21:01 ` Sagi Grimberg
-1 siblings, 0 replies; 28+ messages in thread
From: Sagi Grimberg @ 2020-08-11 21:01 UTC (permalink / raw)
To: linux-nvme, linux-block, Omar Sandoval
Cc: Chaitanya Kulkarni, Christoph Hellwig, Keith Busch, Bart Van Assche
run with: nvme_trtype=tcp ./check test/nvme
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
---
tests/nvme/rc | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/tests/nvme/rc b/tests/nvme/rc
index 306a12440c20..3e97801bbb30 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -21,6 +21,10 @@ _nvme_requires() {
pci)
_have_modules nvme nvme-core
;;
+ tcp)
+ _have_modules nvmet nvme-core nvme-tcp nvmet-tcp
+ _have_configfs
+ ;;
*)
SKIP_REASON="unsupported nvme_trtype=${nvme_trtype}"
return 1
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v3 5/7] nvme: support nvme-tcp when runinng tests
@ 2020-08-11 21:01 ` Sagi Grimberg
0 siblings, 0 replies; 28+ messages in thread
From: Sagi Grimberg @ 2020-08-11 21:01 UTC (permalink / raw)
To: linux-nvme, linux-block, Omar Sandoval
Cc: Keith Busch, Christoph Hellwig, Chaitanya Kulkarni, Bart Van Assche
run with: nvme_trtype=tcp ./check test/nvme
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
---
tests/nvme/rc | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/tests/nvme/rc b/tests/nvme/rc
index 306a12440c20..3e97801bbb30 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -21,6 +21,10 @@ _nvme_requires() {
pci)
_have_modules nvme nvme-core
;;
+ tcp)
+ _have_modules nvmet nvme-core nvme-tcp nvmet-tcp
+ _have_configfs
+ ;;
*)
SKIP_REASON="unsupported nvme_trtype=${nvme_trtype}"
return 1
--
2.25.1
_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v3 6/7] common: move module_unload to common
2020-08-11 21:00 ` Sagi Grimberg
@ 2020-08-11 21:01 ` Sagi Grimberg
-1 siblings, 0 replies; 28+ messages in thread
From: Sagi Grimberg @ 2020-08-11 21:01 UTC (permalink / raw)
To: linux-nvme, linux-block, Omar Sandoval
Cc: Chaitanya Kulkarni, Christoph Hellwig, Keith Busch, Bart Van Assche
It creates a dependency between multipath-over-rdma
and test/nvmeof/rc which is not a natural home
for it. Move it to common helpers.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
---
common/rc | 13 +++++++++++++
tests/nvmeof-mp/rc | 13 -------------
2 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/common/rc b/common/rc
index 7f02103dc786..cdc0150ea5ea 100644
--- a/common/rc
+++ b/common/rc
@@ -291,3 +291,16 @@ _filter_xfs_io_error() {
_uptime_s() {
awk '{ print int($1) }' /proc/uptime
}
+
+# Arguments: module to unload ($1) and retry count ($2).
+unload_module() {
+ local i m=$1 rc=${2:-1}
+
+ [ ! -e "/sys/module/$m" ] && return 0
+ for ((i=rc;i>0;i--)); do
+ modprobe -r "$m"
+ [ ! -e "/sys/module/$m" ] && return 0
+ sleep .1
+ done
+ return 1
+}
diff --git a/tests/nvmeof-mp/rc b/tests/nvmeof-mp/rc
index e446db297ba1..829b26624b7f 100755
--- a/tests/nvmeof-mp/rc
+++ b/tests/nvmeof-mp/rc
@@ -145,19 +145,6 @@ remove_mpath_devs() {
} &>> "$FULL"
}
-# Arguments: module to unload ($1) and retry count ($2).
-unload_module() {
- local i m=$1 rc=${2:-1}
-
- [ ! -e "/sys/module/$m" ] && return 0
- for ((i=rc;i>0;i--)); do
- modprobe -r "$m"
- [ ! -e "/sys/module/$m" ] && return 0
- sleep .1
- done
- return 1
-}
-
start_nvme_client() {
modprobe nvme-core dyndbg=+pmf &&
modprobe nvme dyndbg=+pmf &&
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v3 6/7] common: move module_unload to common
@ 2020-08-11 21:01 ` Sagi Grimberg
0 siblings, 0 replies; 28+ messages in thread
From: Sagi Grimberg @ 2020-08-11 21:01 UTC (permalink / raw)
To: linux-nvme, linux-block, Omar Sandoval
Cc: Keith Busch, Christoph Hellwig, Chaitanya Kulkarni, Bart Van Assche
It creates a dependency between multipath-over-rdma
and test/nvmeof/rc which is not a natural home
for it. Move it to common helpers.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
---
common/rc | 13 +++++++++++++
tests/nvmeof-mp/rc | 13 -------------
2 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/common/rc b/common/rc
index 7f02103dc786..cdc0150ea5ea 100644
--- a/common/rc
+++ b/common/rc
@@ -291,3 +291,16 @@ _filter_xfs_io_error() {
_uptime_s() {
awk '{ print int($1) }' /proc/uptime
}
+
+# Arguments: module to unload ($1) and retry count ($2).
+unload_module() {
+ local i m=$1 rc=${2:-1}
+
+ [ ! -e "/sys/module/$m" ] && return 0
+ for ((i=rc;i>0;i--)); do
+ modprobe -r "$m"
+ [ ! -e "/sys/module/$m" ] && return 0
+ sleep .1
+ done
+ return 1
+}
diff --git a/tests/nvmeof-mp/rc b/tests/nvmeof-mp/rc
index e446db297ba1..829b26624b7f 100755
--- a/tests/nvmeof-mp/rc
+++ b/tests/nvmeof-mp/rc
@@ -145,19 +145,6 @@ remove_mpath_devs() {
} &>> "$FULL"
}
-# Arguments: module to unload ($1) and retry count ($2).
-unload_module() {
- local i m=$1 rc=${2:-1}
-
- [ ! -e "/sys/module/$m" ] && return 0
- for ((i=rc;i>0;i--)); do
- modprobe -r "$m"
- [ ! -e "/sys/module/$m" ] && return 0
- sleep .1
- done
- return 1
-}
-
start_nvme_client() {
modprobe nvme-core dyndbg=+pmf &&
modprobe nvme dyndbg=+pmf &&
--
2.25.1
_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v3 7/7] nvme: support rdma transport type
2020-08-11 21:00 ` Sagi Grimberg
@ 2020-08-11 21:01 ` Sagi Grimberg
-1 siblings, 0 replies; 28+ messages in thread
From: Sagi Grimberg @ 2020-08-11 21:01 UTC (permalink / raw)
To: linux-nvme, linux-block, Omar Sandoval
Cc: Chaitanya Kulkarni, Christoph Hellwig, Keith Busch, Bart Van Assche
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
---
tests/nvme/rc | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/tests/nvme/rc b/tests/nvme/rc
index 3e97801bbb30..675acbfa7012 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -5,6 +5,7 @@
# Test specific to NVMe devices
. common/rc
+. common/multipath-over-rdma
def_traddr="127.0.0.1"
def_adrfam="ipv4"
@@ -25,6 +26,12 @@ _nvme_requires() {
_have_modules nvmet nvme-core nvme-tcp nvmet-tcp
_have_configfs
;;
+ rdma)
+ _have_modules nvmet nvme-core nvme-rdma nvmet-rdma
+ _have_configfs
+ _have_program rdma
+ _have_modules rdma_rxe siw
+ ;;
*)
SKIP_REASON="unsupported nvme_trtype=${nvme_trtype}"
return 1
@@ -115,6 +122,9 @@ _cleanup_nvmet() {
modprobe -r nvmet-${nvme_trtype} 2>/dev/null
fi
modprobe -r nvmet 2>/dev/null
+ if [[ "${nvme_trtype}" == "rdma" ]]; then
+ stop_soft_rdma
+ fi
}
_setup_nvmet() {
@@ -124,6 +134,11 @@ _setup_nvmet() {
modprobe nvmet-${nvme_trtype}
fi
modprobe nvme-${nvme_trtype}
+ if [[ "${nvme_trtype}" == "rdma" ]]; then
+ start_soft_rdma
+ rdma_intfs=$(rdma_network_interfaces)
+ def_traddr=$(get_ipv4_addr ${rdma_intfs[0]})
+ fi
}
_nvme_disconnect_ctrl() {
--
2.25.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH v3 7/7] nvme: support rdma transport type
@ 2020-08-11 21:01 ` Sagi Grimberg
0 siblings, 0 replies; 28+ messages in thread
From: Sagi Grimberg @ 2020-08-11 21:01 UTC (permalink / raw)
To: linux-nvme, linux-block, Omar Sandoval
Cc: Keith Busch, Christoph Hellwig, Chaitanya Kulkarni, Bart Van Assche
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
---
tests/nvme/rc | 15 +++++++++++++++
1 file changed, 15 insertions(+)
diff --git a/tests/nvme/rc b/tests/nvme/rc
index 3e97801bbb30..675acbfa7012 100644
--- a/tests/nvme/rc
+++ b/tests/nvme/rc
@@ -5,6 +5,7 @@
# Test specific to NVMe devices
. common/rc
+. common/multipath-over-rdma
def_traddr="127.0.0.1"
def_adrfam="ipv4"
@@ -25,6 +26,12 @@ _nvme_requires() {
_have_modules nvmet nvme-core nvme-tcp nvmet-tcp
_have_configfs
;;
+ rdma)
+ _have_modules nvmet nvme-core nvme-rdma nvmet-rdma
+ _have_configfs
+ _have_program rdma
+ _have_modules rdma_rxe siw
+ ;;
*)
SKIP_REASON="unsupported nvme_trtype=${nvme_trtype}"
return 1
@@ -115,6 +122,9 @@ _cleanup_nvmet() {
modprobe -r nvmet-${nvme_trtype} 2>/dev/null
fi
modprobe -r nvmet 2>/dev/null
+ if [[ "${nvme_trtype}" == "rdma" ]]; then
+ stop_soft_rdma
+ fi
}
_setup_nvmet() {
@@ -124,6 +134,11 @@ _setup_nvmet() {
modprobe nvmet-${nvme_trtype}
fi
modprobe nvme-${nvme_trtype}
+ if [[ "${nvme_trtype}" == "rdma" ]]; then
+ start_soft_rdma
+ rdma_intfs=$(rdma_network_interfaces)
+ def_traddr=$(get_ipv4_addr ${rdma_intfs[0]})
+ fi
}
_nvme_disconnect_ctrl() {
--
2.25.1
_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme
^ permalink raw reply related [flat|nested] 28+ messages in thread
* Re: [PATCH v3 6/7] common: move module_unload to common
2020-08-11 21:01 ` Sagi Grimberg
@ 2020-08-11 21:30 ` Bart Van Assche
-1 siblings, 0 replies; 28+ messages in thread
From: Bart Van Assche @ 2020-08-11 21:30 UTC (permalink / raw)
To: Sagi Grimberg, linux-nvme, linux-block, Omar Sandoval
Cc: Chaitanya Kulkarni, Christoph Hellwig, Keith Busch
On 2020-08-11 14:01, Sagi Grimberg wrote:
> It creates a dependency between multipath-over-rdma
> and test/nvmeof/rc which is not a natural home
> for it. Move it to common helpers.
>
> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
> ---
> common/rc | 13 +++++++++++++
> tests/nvmeof-mp/rc | 13 -------------
> 2 files changed, 13 insertions(+), 13 deletions(-)
>
> diff --git a/common/rc b/common/rc
> index 7f02103dc786..cdc0150ea5ea 100644
> --- a/common/rc
> +++ b/common/rc
> @@ -291,3 +291,16 @@ _filter_xfs_io_error() {
> _uptime_s() {
> awk '{ print int($1) }' /proc/uptime
> }
> +
> +# Arguments: module to unload ($1) and retry count ($2).
> +unload_module() {
> + local i m=$1 rc=${2:-1}
> +
> + [ ! -e "/sys/module/$m" ] && return 0
> + for ((i=rc;i>0;i--)); do
> + modprobe -r "$m"
> + [ ! -e "/sys/module/$m" ] && return 0
> + sleep .1
> + done
> + return 1
> +}
> diff --git a/tests/nvmeof-mp/rc b/tests/nvmeof-mp/rc
> index e446db297ba1..829b26624b7f 100755
> --- a/tests/nvmeof-mp/rc
> +++ b/tests/nvmeof-mp/rc
> @@ -145,19 +145,6 @@ remove_mpath_devs() {
> } &>> "$FULL"
> }
>
> -# Arguments: module to unload ($1) and retry count ($2).
> -unload_module() {
> - local i m=$1 rc=${2:-1}
> -
> - [ ! -e "/sys/module/$m" ] && return 0
> - for ((i=rc;i>0;i--)); do
> - modprobe -r "$m"
> - [ ! -e "/sys/module/$m" ] && return 0
> - sleep .1
> - done
> - return 1
> -}
> -
> start_nvme_client() {
> modprobe nvme-core dyndbg=+pmf &&
> modprobe nvme dyndbg=+pmf &&
>
Hi Sagi,
I think there is another copy of unload_module() in tests/srp/rc. How about
also removing that copy?
Thanks,
Bart.
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v3 6/7] common: move module_unload to common
@ 2020-08-11 21:30 ` Bart Van Assche
0 siblings, 0 replies; 28+ messages in thread
From: Bart Van Assche @ 2020-08-11 21:30 UTC (permalink / raw)
To: Sagi Grimberg, linux-nvme, linux-block, Omar Sandoval
Cc: Keith Busch, Christoph Hellwig, Chaitanya Kulkarni
On 2020-08-11 14:01, Sagi Grimberg wrote:
> It creates a dependency between multipath-over-rdma
> and test/nvmeof/rc which is not a natural home
> for it. Move it to common helpers.
>
> Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
> ---
> common/rc | 13 +++++++++++++
> tests/nvmeof-mp/rc | 13 -------------
> 2 files changed, 13 insertions(+), 13 deletions(-)
>
> diff --git a/common/rc b/common/rc
> index 7f02103dc786..cdc0150ea5ea 100644
> --- a/common/rc
> +++ b/common/rc
> @@ -291,3 +291,16 @@ _filter_xfs_io_error() {
> _uptime_s() {
> awk '{ print int($1) }' /proc/uptime
> }
> +
> +# Arguments: module to unload ($1) and retry count ($2).
> +unload_module() {
> + local i m=$1 rc=${2:-1}
> +
> + [ ! -e "/sys/module/$m" ] && return 0
> + for ((i=rc;i>0;i--)); do
> + modprobe -r "$m"
> + [ ! -e "/sys/module/$m" ] && return 0
> + sleep .1
> + done
> + return 1
> +}
> diff --git a/tests/nvmeof-mp/rc b/tests/nvmeof-mp/rc
> index e446db297ba1..829b26624b7f 100755
> --- a/tests/nvmeof-mp/rc
> +++ b/tests/nvmeof-mp/rc
> @@ -145,19 +145,6 @@ remove_mpath_devs() {
> } &>> "$FULL"
> }
>
> -# Arguments: module to unload ($1) and retry count ($2).
> -unload_module() {
> - local i m=$1 rc=${2:-1}
> -
> - [ ! -e "/sys/module/$m" ] && return 0
> - for ((i=rc;i>0;i--)); do
> - modprobe -r "$m"
> - [ ! -e "/sys/module/$m" ] && return 0
> - sleep .1
> - done
> - return 1
> -}
> -
> start_nvme_client() {
> modprobe nvme-core dyndbg=+pmf &&
> modprobe nvme dyndbg=+pmf &&
>
Hi Sagi,
I think there is another copy of unload_module() in tests/srp/rc. How about
also removing that copy?
Thanks,
Bart.
_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v3 6/7] common: move module_unload to common
2020-08-11 21:30 ` Bart Van Assche
@ 2020-08-11 21:45 ` Sagi Grimberg
-1 siblings, 0 replies; 28+ messages in thread
From: Sagi Grimberg @ 2020-08-11 21:45 UTC (permalink / raw)
To: Bart Van Assche, linux-nvme, linux-block, Omar Sandoval
Cc: Chaitanya Kulkarni, Christoph Hellwig, Keith Busch
> Hi Sagi,
>
> I think there is another copy of unload_module() in tests/srp/rc. How about
> also removing that copy?
Yes, this is minor enough to remove when applying, Or I can respin the
patch set again if Omar prefers it that way.
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v3 6/7] common: move module_unload to common
@ 2020-08-11 21:45 ` Sagi Grimberg
0 siblings, 0 replies; 28+ messages in thread
From: Sagi Grimberg @ 2020-08-11 21:45 UTC (permalink / raw)
To: Bart Van Assche, linux-nvme, linux-block, Omar Sandoval
Cc: Keith Busch, Christoph Hellwig, Chaitanya Kulkarni
> Hi Sagi,
>
> I think there is another copy of unload_module() in tests/srp/rc. How about
> also removing that copy?
Yes, this is minor enough to remove when applying, Or I can respin the
patch set again if Omar prefers it that way.
_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v3 2/7] nvme: consolidate some nvme-cli utility functions
2020-08-11 21:00 ` Sagi Grimberg
@ 2020-08-12 15:49 ` Logan Gunthorpe
-1 siblings, 0 replies; 28+ messages in thread
From: Logan Gunthorpe @ 2020-08-12 15:49 UTC (permalink / raw)
To: Sagi Grimberg, linux-nvme, linux-block, Omar Sandoval
Cc: Keith Busch, Christoph Hellwig, Chaitanya Kulkarni, Bart Van Assche
On 2020-08-11 3:00 p.m., Sagi Grimberg wrote:
> diff --git a/tests/nvme/rc b/tests/nvme/rc
> index 320aa4b2b475..6d57cf591300 100644
> --- a/tests/nvme/rc
> +++ b/tests/nvme/rc
> @@ -64,7 +64,7 @@ _cleanup_nvmet() {
> transport="$(cat "/sys/class/nvme/${dev}/transport")"
> if [[ "$transport" == "loop" ]]; then
> echo "WARNING: Test did not clean up loop device: ${dev}"
> - nvme disconnect -d "${dev}"
> + _nvme_disconnect_ctrl "${dev}"
> fi
> done
>
> @@ -97,6 +97,33 @@ _setup_nvmet() {
> modprobe nvme-loop
> }
>
> +_nvme_disconnect_ctrl() {
> + local ctrl="$1"
> +
> + nvme disconnect -d ${ctrl}
We're missing some quotes here and in many other places in this
patchset. Have you run shellcheck on this? I'd expect it to complain
about these.
> +}
> +
> +_nvme_disconnect_subsys() {
> + local subsysnqn="$1"
> +
> + nvme disconnect -n ${subsysnqn}
> +}
> +
> +_nvme_connect_subsys() {
> + local trtype="$1"
> + local subsysnqn="$2"
> +
> + cmd="nvme connect -t ${trtype} -n ${subsysnqn}"
> + eval $cmd
Why eval? It makes the quoting here questionable...
Logan
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v3 2/7] nvme: consolidate some nvme-cli utility functions
@ 2020-08-12 15:49 ` Logan Gunthorpe
0 siblings, 0 replies; 28+ messages in thread
From: Logan Gunthorpe @ 2020-08-12 15:49 UTC (permalink / raw)
To: Sagi Grimberg, linux-nvme, linux-block, Omar Sandoval
Cc: Keith Busch, Christoph Hellwig, Chaitanya Kulkarni, Bart Van Assche
On 2020-08-11 3:00 p.m., Sagi Grimberg wrote:
> diff --git a/tests/nvme/rc b/tests/nvme/rc
> index 320aa4b2b475..6d57cf591300 100644
> --- a/tests/nvme/rc
> +++ b/tests/nvme/rc
> @@ -64,7 +64,7 @@ _cleanup_nvmet() {
> transport="$(cat "/sys/class/nvme/${dev}/transport")"
> if [[ "$transport" == "loop" ]]; then
> echo "WARNING: Test did not clean up loop device: ${dev}"
> - nvme disconnect -d "${dev}"
> + _nvme_disconnect_ctrl "${dev}"
> fi
> done
>
> @@ -97,6 +97,33 @@ _setup_nvmet() {
> modprobe nvme-loop
> }
>
> +_nvme_disconnect_ctrl() {
> + local ctrl="$1"
> +
> + nvme disconnect -d ${ctrl}
We're missing some quotes here and in many other places in this
patchset. Have you run shellcheck on this? I'd expect it to complain
about these.
> +}
> +
> +_nvme_disconnect_subsys() {
> + local subsysnqn="$1"
> +
> + nvme disconnect -n ${subsysnqn}
> +}
> +
> +_nvme_connect_subsys() {
> + local trtype="$1"
> + local subsysnqn="$2"
> +
> + cmd="nvme connect -t ${trtype} -n ${subsysnqn}"
> + eval $cmd
Why eval? It makes the quoting here questionable...
Logan
_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v3 5/7] nvme: support nvme-tcp when runinng tests
2020-08-11 21:01 ` Sagi Grimberg
@ 2020-08-13 2:42 ` Chaitanya Kulkarni
-1 siblings, 0 replies; 28+ messages in thread
From: Chaitanya Kulkarni @ 2020-08-13 2:42 UTC (permalink / raw)
To: Sagi Grimberg, linux-nvme, linux-block, Omar Sandoval
Cc: Christoph Hellwig, Keith Busch, Bart Van Assche
On 8/11/20 14:01, Sagi Grimberg wrote:
> run with: nvme_trtype=tcp ./check test/nvme
>
> Signed-off-by: Sagi Grimberg<sagi@grimberg.me>
This patch looks good to me.
Reviwed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v3 5/7] nvme: support nvme-tcp when runinng tests
@ 2020-08-13 2:42 ` Chaitanya Kulkarni
0 siblings, 0 replies; 28+ messages in thread
From: Chaitanya Kulkarni @ 2020-08-13 2:42 UTC (permalink / raw)
To: Sagi Grimberg, linux-nvme, linux-block, Omar Sandoval
Cc: Keith Busch, Christoph Hellwig, Bart Van Assche
On 8/11/20 14:01, Sagi Grimberg wrote:
> run with: nvme_trtype=tcp ./check test/nvme
>
> Signed-off-by: Sagi Grimberg<sagi@grimberg.me>
This patch looks good to me.
Reviwed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v3 1/7] nvme: consolidate nvme requirements based on transport type
2020-08-11 21:00 ` Sagi Grimberg
@ 2020-08-13 2:44 ` Chaitanya Kulkarni
-1 siblings, 0 replies; 28+ messages in thread
From: Chaitanya Kulkarni @ 2020-08-13 2:44 UTC (permalink / raw)
To: Sagi Grimberg, linux-nvme, linux-block, Omar Sandoval
Cc: Christoph Hellwig, Keith Busch, Bart Van Assche
On 8/11/20 14:01, Sagi Grimberg wrote:
> Right now, only pci and loop have tests, hence these are
> the only ones that are allowed. The user can pass an env
> variable nvme_trtype and check for the necessary modules.
>
> This allows prepares us to support other transport types.
>
> Note that test 031 is designed to run only with nvme, hence
> it overrides the environment variable to nvme_trtype=pci.
>
> Signed-off-by: Sagi Grimberg<sagi@grimberg.me>
Looks good.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v3 1/7] nvme: consolidate nvme requirements based on transport type
@ 2020-08-13 2:44 ` Chaitanya Kulkarni
0 siblings, 0 replies; 28+ messages in thread
From: Chaitanya Kulkarni @ 2020-08-13 2:44 UTC (permalink / raw)
To: Sagi Grimberg, linux-nvme, linux-block, Omar Sandoval
Cc: Keith Busch, Christoph Hellwig, Bart Van Assche
On 8/11/20 14:01, Sagi Grimberg wrote:
> Right now, only pci and loop have tests, hence these are
> the only ones that are allowed. The user can pass an env
> variable nvme_trtype and check for the necessary modules.
>
> This allows prepares us to support other transport types.
>
> Note that test 031 is designed to run only with nvme, hence
> it overrides the environment variable to nvme_trtype=pci.
>
> Signed-off-by: Sagi Grimberg<sagi@grimberg.me>
Looks good.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v3 0/7] blktests: Add support to run nvme tests with tcp/rdma transports
2020-08-11 21:00 ` Sagi Grimberg
@ 2020-08-13 11:01 ` Yi Zhang
-1 siblings, 0 replies; 28+ messages in thread
From: Yi Zhang @ 2020-08-13 11:01 UTC (permalink / raw)
To: Sagi Grimberg, linux-nvme, linux-block, Omar Sandoval
Cc: Keith Busch, Christoph Hellwig, Chaitanya Kulkarni, Bart Van Assche
On 8/12/20 5:00 AM, Sagi Grimberg wrote:
> We have a collection of nvme tests, but all run with nvme-loop. This
> is the easiest to run on a standalone machine. However its very much possible
> to run nvme-tcp and nvme-rdma using a loopback network. Add capability to run
> tests with a new environment variable to set the transport type $nvme_trtype.
>
> $ nvme_trtype=[loop|tcp|rdma] ./check test/nvme
The executing cmd should be:
$ nvme_trtype=[loop|tcp|rdma] ./check nvme
Also described in
[PATCH v3 5/7] nvme: support nvme-tcp when runinng tests
> This buys us some nice coverage on some more transport types. We also add
> some transport type specific helpers to mark tests that are relevant only
> for a single transport.
>
> Changes from v2:
> - changed patch 6 to move unload_module to common/rc
> - changed helper to be named _require_nvme_trtype_is_fabrics
> Changes from v1:
> - added patch to remove use of module_unload
> - move trtype agnostic logig helpers in patch #3
>
> Sagi Grimberg (7):
> nvme: consolidate nvme requirements based on transport type
> nvme: consolidate some nvme-cli utility functions
> nvme: make tests transport type agnostic
> tests/nvme: restrict tests to specific transports
> nvme: support nvme-tcp when runinng tests
> common: move module_unload to common
> nvme: support rdma transport type
>
> common/rc | 13 +++++
> tests/nvme/002 | 8 +--
> tests/nvme/003 | 10 ++--
> tests/nvme/004 | 12 +++--
> tests/nvme/005 | 15 +++---
> tests/nvme/006 | 7 +--
> tests/nvme/007 | 5 +-
> tests/nvme/008 | 13 ++---
> tests/nvme/009 | 11 ++--
> tests/nvme/010 | 13 ++---
> tests/nvme/011 | 13 ++---
> tests/nvme/012 | 14 +++---
> tests/nvme/013 | 13 ++---
> tests/nvme/014 | 13 ++---
> tests/nvme/015 | 12 +++--
> tests/nvme/016 | 7 +--
> tests/nvme/017 | 7 +--
> tests/nvme/018 | 13 ++---
> tests/nvme/019 | 13 ++---
> tests/nvme/020 | 11 ++--
> tests/nvme/021 | 13 ++---
> tests/nvme/022 | 13 ++---
> tests/nvme/023 | 13 ++---
> tests/nvme/024 | 13 ++---
> tests/nvme/025 | 13 ++---
> tests/nvme/026 | 13 ++---
> tests/nvme/027 | 13 ++---
> tests/nvme/028 | 15 +++---
> tests/nvme/029 | 13 ++---
> tests/nvme/030 | 8 +--
> tests/nvme/031 | 12 ++---
> tests/nvme/032 | 4 ++
> tests/nvme/rc | 122 ++++++++++++++++++++++++++++++++++++++++++---
> tests/nvmeof-mp/rc | 13 -----
> 34 files changed, 322 insertions(+), 179 deletions(-)
>
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH v3 0/7] blktests: Add support to run nvme tests with tcp/rdma transports
@ 2020-08-13 11:01 ` Yi Zhang
0 siblings, 0 replies; 28+ messages in thread
From: Yi Zhang @ 2020-08-13 11:01 UTC (permalink / raw)
To: Sagi Grimberg, linux-nvme, linux-block, Omar Sandoval
Cc: Keith Busch, Christoph Hellwig, Chaitanya Kulkarni, Bart Van Assche
On 8/12/20 5:00 AM, Sagi Grimberg wrote:
> We have a collection of nvme tests, but all run with nvme-loop. This
> is the easiest to run on a standalone machine. However its very much possible
> to run nvme-tcp and nvme-rdma using a loopback network. Add capability to run
> tests with a new environment variable to set the transport type $nvme_trtype.
>
> $ nvme_trtype=[loop|tcp|rdma] ./check test/nvme
The executing cmd should be:
$ nvme_trtype=[loop|tcp|rdma] ./check nvme
Also described in
[PATCH v3 5/7] nvme: support nvme-tcp when runinng tests
> This buys us some nice coverage on some more transport types. We also add
> some transport type specific helpers to mark tests that are relevant only
> for a single transport.
>
> Changes from v2:
> - changed patch 6 to move unload_module to common/rc
> - changed helper to be named _require_nvme_trtype_is_fabrics
> Changes from v1:
> - added patch to remove use of module_unload
> - move trtype agnostic logig helpers in patch #3
>
> Sagi Grimberg (7):
> nvme: consolidate nvme requirements based on transport type
> nvme: consolidate some nvme-cli utility functions
> nvme: make tests transport type agnostic
> tests/nvme: restrict tests to specific transports
> nvme: support nvme-tcp when runinng tests
> common: move module_unload to common
> nvme: support rdma transport type
>
> common/rc | 13 +++++
> tests/nvme/002 | 8 +--
> tests/nvme/003 | 10 ++--
> tests/nvme/004 | 12 +++--
> tests/nvme/005 | 15 +++---
> tests/nvme/006 | 7 +--
> tests/nvme/007 | 5 +-
> tests/nvme/008 | 13 ++---
> tests/nvme/009 | 11 ++--
> tests/nvme/010 | 13 ++---
> tests/nvme/011 | 13 ++---
> tests/nvme/012 | 14 +++---
> tests/nvme/013 | 13 ++---
> tests/nvme/014 | 13 ++---
> tests/nvme/015 | 12 +++--
> tests/nvme/016 | 7 +--
> tests/nvme/017 | 7 +--
> tests/nvme/018 | 13 ++---
> tests/nvme/019 | 13 ++---
> tests/nvme/020 | 11 ++--
> tests/nvme/021 | 13 ++---
> tests/nvme/022 | 13 ++---
> tests/nvme/023 | 13 ++---
> tests/nvme/024 | 13 ++---
> tests/nvme/025 | 13 ++---
> tests/nvme/026 | 13 ++---
> tests/nvme/027 | 13 ++---
> tests/nvme/028 | 15 +++---
> tests/nvme/029 | 13 ++---
> tests/nvme/030 | 8 +--
> tests/nvme/031 | 12 ++---
> tests/nvme/032 | 4 ++
> tests/nvme/rc | 122 ++++++++++++++++++++++++++++++++++++++++++---
> tests/nvmeof-mp/rc | 13 -----
> 34 files changed, 322 insertions(+), 179 deletions(-)
>
_______________________________________________
Linux-nvme mailing list
Linux-nvme@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme
^ permalink raw reply [flat|nested] 28+ messages in thread
end of thread, other threads:[~2020-08-13 11:02 UTC | newest]
Thread overview: 28+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-11 21:00 [PATCH v3 0/7] blktests: Add support to run nvme tests with tcp/rdma transports Sagi Grimberg
2020-08-11 21:00 ` Sagi Grimberg
2020-08-11 21:00 ` [PATCH v3 1/7] nvme: consolidate nvme requirements based on transport type Sagi Grimberg
2020-08-11 21:00 ` Sagi Grimberg
2020-08-13 2:44 ` Chaitanya Kulkarni
2020-08-13 2:44 ` Chaitanya Kulkarni
2020-08-11 21:00 ` [PATCH v3 2/7] nvme: consolidate some nvme-cli utility functions Sagi Grimberg
2020-08-11 21:00 ` Sagi Grimberg
2020-08-12 15:49 ` Logan Gunthorpe
2020-08-12 15:49 ` Logan Gunthorpe
2020-08-11 21:00 ` [PATCH v3 3/7] nvme: make tests transport type agnostic Sagi Grimberg
2020-08-11 21:00 ` Sagi Grimberg
2020-08-11 21:00 ` [PATCH v3 4/7] tests/nvme: restrict tests to specific transports Sagi Grimberg
2020-08-11 21:00 ` Sagi Grimberg
2020-08-11 21:01 ` [PATCH v3 5/7] nvme: support nvme-tcp when runinng tests Sagi Grimberg
2020-08-11 21:01 ` Sagi Grimberg
2020-08-13 2:42 ` Chaitanya Kulkarni
2020-08-13 2:42 ` Chaitanya Kulkarni
2020-08-11 21:01 ` [PATCH v3 6/7] common: move module_unload to common Sagi Grimberg
2020-08-11 21:01 ` Sagi Grimberg
2020-08-11 21:30 ` Bart Van Assche
2020-08-11 21:30 ` Bart Van Assche
2020-08-11 21:45 ` Sagi Grimberg
2020-08-11 21:45 ` Sagi Grimberg
2020-08-11 21:01 ` [PATCH v3 7/7] nvme: support rdma transport type Sagi Grimberg
2020-08-11 21:01 ` Sagi Grimberg
2020-08-13 11:01 ` [PATCH v3 0/7] blktests: Add support to run nvme tests with tcp/rdma transports Yi Zhang
2020-08-13 11:01 ` Yi Zhang
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.