* [PATCH] power: supply: Add dependency to lego-ev3-battery Kconfig options
@ 2020-08-09 18:54 Alex Dewar
2020-08-11 14:24 ` David Lechner
0 siblings, 1 reply; 9+ messages in thread
From: Alex Dewar @ 2020-08-09 18:54 UTC (permalink / raw)
To: Sebastian Reichel, David Lechner, linux-pm, linux-kernel; +Cc: Alex Dewar
This battery appears only to be used by a single board (DA850), so it
makes sense to add this to the Kconfig file so that users don't build
the module unnecessarily. It currently seems to be built for the x86
Arch Linux kernel where it's probably not doing much good.
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
---
drivers/power/supply/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index faf2830aa1527..9f76e2f47ac6d 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -164,7 +164,7 @@ config BATTERY_DS2782
config BATTERY_LEGO_EV3
tristate "LEGO MINDSTORMS EV3 battery"
- depends on OF && IIO && GPIOLIB
+ depends on OF && IIO && GPIOLIB && (ARCH_DAVINCI_DA850 || COMPILE_TEST)
help
Say Y here to enable support for the LEGO MINDSTORMS EV3 battery.
--
2.28.0
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [PATCH] power: supply: Add dependency to lego-ev3-battery Kconfig options
2020-08-09 18:54 [PATCH] power: supply: Add dependency to lego-ev3-battery Kconfig options Alex Dewar
@ 2020-08-11 14:24 ` David Lechner
2020-08-12 13:37 ` Alex Dewar
0 siblings, 1 reply; 9+ messages in thread
From: David Lechner @ 2020-08-11 14:24 UTC (permalink / raw)
To: Alex Dewar, Sebastian Reichel, linux-pm, linux-kernel
Cc: Sekhar Nori, Bartosz Gołaszewski
On 8/9/20 1:54 PM, Alex Dewar wrote:
> This battery appears only to be used by a single board (DA850), so it
> makes sense to add this to the Kconfig file so that users don't build
> the module unnecessarily. It currently seems to be built for the x86
> Arch Linux kernel where it's probably not doing much good.
It would probably also make sense to add "default n" since it only
applies to one board in the entire arch.
BATTERY_LEGO_EV3 is already explicitly set to "m" in the appropriate
defconfig file, so I don't think it would break anything.
>
> Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
> ---
> drivers/power/supply/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index faf2830aa1527..9f76e2f47ac6d 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -164,7 +164,7 @@ config BATTERY_DS2782
>
> config BATTERY_LEGO_EV3
> tristate "LEGO MINDSTORMS EV3 battery"
> - depends on OF && IIO && GPIOLIB
> + depends on OF && IIO && GPIOLIB && (ARCH_DAVINCI_DA850 || COMPILE_TEST)
> help
> Say Y here to enable support for the LEGO MINDSTORMS EV3 battery.
>
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] power: supply: Add dependency to lego-ev3-battery Kconfig options
2020-08-11 14:24 ` David Lechner
@ 2020-08-12 13:37 ` Alex Dewar
2020-08-12 15:24 ` David Lechner
0 siblings, 1 reply; 9+ messages in thread
From: Alex Dewar @ 2020-08-12 13:37 UTC (permalink / raw)
To: David Lechner
Cc: Alex Dewar, Sebastian Reichel, linux-pm, linux-kernel,
Sekhar Nori, Bartosz Go??aszewski
On Tue, Aug 11, 2020 at 09:24:10AM -0500, David Lechner wrote:
> On 8/9/20 1:54 PM, Alex Dewar wrote:
> > This battery appears only to be used by a single board (DA850), so it
> > makes sense to add this to the Kconfig file so that users don't build
> > the module unnecessarily. It currently seems to be built for the x86
> > Arch Linux kernel where it's probably not doing much good.
>
> It would probably also make sense to add "default n" since it only
> applies to one board in the entire arch.
Ah ok. That makes sense. Would you like me to send a follow-on patch for
this?
Alex
>
> BATTERY_LEGO_EV3 is already explicitly set to "m" in the appropriate
> defconfig file, so I don't think it would break anything.
>
> >
> > Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
> > ---
> > drivers/power/supply/Kconfig | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> > index faf2830aa1527..9f76e2f47ac6d 100644
> > --- a/drivers/power/supply/Kconfig
> > +++ b/drivers/power/supply/Kconfig
> > @@ -164,7 +164,7 @@ config BATTERY_DS2782
> > config BATTERY_LEGO_EV3
> > tristate "LEGO MINDSTORMS EV3 battery"
> > - depends on OF && IIO && GPIOLIB
> > + depends on OF && IIO && GPIOLIB && (ARCH_DAVINCI_DA850 || COMPILE_TEST)
> > help
> > Say Y here to enable support for the LEGO MINDSTORMS EV3 battery.
> >
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] power: supply: Add dependency to lego-ev3-battery Kconfig options
2020-08-12 13:37 ` Alex Dewar
@ 2020-08-12 15:24 ` David Lechner
2020-08-12 19:02 ` Alex Dewar
0 siblings, 1 reply; 9+ messages in thread
From: David Lechner @ 2020-08-12 15:24 UTC (permalink / raw)
To: Alex Dewar
Cc: Sebastian Reichel, linux-pm, linux-kernel, Sekhar Nori,
Bartosz Go??aszewski
On 8/12/20 8:37 AM, Alex Dewar wrote:
> On Tue, Aug 11, 2020 at 09:24:10AM -0500, David Lechner wrote:
>> On 8/9/20 1:54 PM, Alex Dewar wrote:
>>> This battery appears only to be used by a single board (DA850), so it
>>> makes sense to add this to the Kconfig file so that users don't build
>>> the module unnecessarily. It currently seems to be built for the x86
>>> Arch Linux kernel where it's probably not doing much good.
>>
>> It would probably also make sense to add "default n" since it only
>> applies to one board in the entire arch.
>
> Ah ok. That makes sense. Would you like me to send a follow-on patch for
> this?
You can just send a v2 patch that includes the change below and the
additional change.
>
> Alex
>
>>
>> BATTERY_LEGO_EV3 is already explicitly set to "m" in the appropriate
>> defconfig file, so I don't think it would break anything.
>>
>>>
>>> Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
>>> ---
>>> drivers/power/supply/Kconfig | 2 +-
>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
>>> index faf2830aa1527..9f76e2f47ac6d 100644
>>> --- a/drivers/power/supply/Kconfig
>>> +++ b/drivers/power/supply/Kconfig
>>> @@ -164,7 +164,7 @@ config BATTERY_DS2782
>>> config BATTERY_LEGO_EV3
>>> tristate "LEGO MINDSTORMS EV3 battery"
>>> - depends on OF && IIO && GPIOLIB
>>> + depends on OF && IIO && GPIOLIB && (ARCH_DAVINCI_DA850 || COMPILE_TEST)
>>> help
>>> Say Y here to enable support for the LEGO MINDSTORMS EV3 battery.
>>>
>>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] power: supply: Add dependency to lego-ev3-battery Kconfig options
2020-08-12 15:24 ` David Lechner
@ 2020-08-12 19:02 ` Alex Dewar
2020-08-12 19:12 ` David Lechner
0 siblings, 1 reply; 9+ messages in thread
From: Alex Dewar @ 2020-08-12 19:02 UTC (permalink / raw)
To: David Lechner
Cc: Alex Dewar, Sebastian Reichel, linux-pm, linux-kernel,
Sekhar Nori, Bartosz Go??aszewski
On Wed, Aug 12, 2020 at 10:24:30AM -0500, David Lechner wrote:
> On 8/12/20 8:37 AM, Alex Dewar wrote:
> > On Tue, Aug 11, 2020 at 09:24:10AM -0500, David Lechner wrote:
> > > On 8/9/20 1:54 PM, Alex Dewar wrote:
> > > > This battery appears only to be used by a single board (DA850), so it
> > > > makes sense to add this to the Kconfig file so that users don't build
> > > > the module unnecessarily. It currently seems to be built for the x86
> > > > Arch Linux kernel where it's probably not doing much good.
> > >
> > > It would probably also make sense to add "default n" since it only
> > > applies to one board in the entire arch.
> >
> > Ah ok. That makes sense. Would you like me to send a follow-on patch for
> > this?
>
> You can just send a v2 patch that includes the change below and the
> additional change.
I've just had a look at the documentation[1] and it seems that as there's
no "default y" there it'll default to n anyway. Have I got that right?
[1] https://www.kernel.org/doc/html/latest/kbuild/kconfig-language.html#menu-attributes
>
> >
> > Alex
> >
> > >
> > > BATTERY_LEGO_EV3 is already explicitly set to "m" in the appropriate
> > > defconfig file, so I don't think it would break anything.
> > >
> > > >
> > > > Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
> > > > ---
> > > > drivers/power/supply/Kconfig | 2 +-
> > > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> > > > index faf2830aa1527..9f76e2f47ac6d 100644
> > > > --- a/drivers/power/supply/Kconfig
> > > > +++ b/drivers/power/supply/Kconfig
> > > > @@ -164,7 +164,7 @@ config BATTERY_DS2782
> > > > config BATTERY_LEGO_EV3
> > > > tristate "LEGO MINDSTORMS EV3 battery"
> > > > - depends on OF && IIO && GPIOLIB
> > > > + depends on OF && IIO && GPIOLIB && (ARCH_DAVINCI_DA850 || COMPILE_TEST)
> > > > help
> > > > Say Y here to enable support for the LEGO MINDSTORMS EV3 battery.
> > > >
> > >
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] power: supply: Add dependency to lego-ev3-battery Kconfig options
2020-08-12 19:02 ` Alex Dewar
@ 2020-08-12 19:12 ` David Lechner
2020-08-17 17:43 ` Alex Dewar
0 siblings, 1 reply; 9+ messages in thread
From: David Lechner @ 2020-08-12 19:12 UTC (permalink / raw)
To: Alex Dewar
Cc: Sebastian Reichel, linux-pm, linux-kernel, Sekhar Nori,
Bartosz Go??aszewski
On 8/12/20 2:02 PM, Alex Dewar wrote:
> On Wed, Aug 12, 2020 at 10:24:30AM -0500, David Lechner wrote:
>> On 8/12/20 8:37 AM, Alex Dewar wrote:
>>> On Tue, Aug 11, 2020 at 09:24:10AM -0500, David Lechner wrote:
>>>> On 8/9/20 1:54 PM, Alex Dewar wrote:
>>>>> This battery appears only to be used by a single board (DA850), so it
>>>>> makes sense to add this to the Kconfig file so that users don't build
>>>>> the module unnecessarily. It currently seems to be built for the x86
>>>>> Arch Linux kernel where it's probably not doing much good.
>>>>
>>>> It would probably also make sense to add "default n" since it only
>>>> applies to one board in the entire arch.
>>>
>>> Ah ok. That makes sense. Would you like me to send a follow-on patch for
>>> this?
>>
>> You can just send a v2 patch that includes the change below and the
>> additional change.
>
> I've just had a look at the documentation[1] and it seems that as there's
> no "default y" there it'll default to n anyway. Have I got that right?
>
> [1] https://www.kernel.org/doc/html/latest/kbuild/kconfig-language.html#menu-attributes
>
Yes, that seems right. That makes me wonder why this would have been enabled in
the Arch Linux kernel for x86 then.
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] power: supply: Add dependency to lego-ev3-battery Kconfig options
2020-08-12 19:12 ` David Lechner
@ 2020-08-17 17:43 ` Alex Dewar
2020-08-17 18:25 ` David Lechner
0 siblings, 1 reply; 9+ messages in thread
From: Alex Dewar @ 2020-08-17 17:43 UTC (permalink / raw)
To: David Lechner
Cc: Alex Dewar, Sebastian Reichel, linux-pm, linux-kernel,
Sekhar Nori, Bartosz Go??aszewski
On Wed, Aug 12, 2020 at 02:12:57PM -0500, David Lechner wrote:
> On 8/12/20 2:02 PM, Alex Dewar wrote:
> > On Wed, Aug 12, 2020 at 10:24:30AM -0500, David Lechner wrote:
> > > On 8/12/20 8:37 AM, Alex Dewar wrote:
> > > > On Tue, Aug 11, 2020 at 09:24:10AM -0500, David Lechner wrote:
> > > > > On 8/9/20 1:54 PM, Alex Dewar wrote:
> > > > > > This battery appears only to be used by a single board (DA850), so it
> > > > > > makes sense to add this to the Kconfig file so that users don't build
> > > > > > the module unnecessarily. It currently seems to be built for the x86
> > > > > > Arch Linux kernel where it's probably not doing much good.
> > > > >
> > > > > It would probably also make sense to add "default n" since it only
> > > > > applies to one board in the entire arch.
> > > >
> > > > Ah ok. That makes sense. Would you like me to send a follow-on patch for
> > > > this?
> > >
> > > You can just send a v2 patch that includes the change below and the
> > > additional change.
> >
> > I've just had a look at the documentation[1] and it seems that as there's
> > no "default y" there it'll default to n anyway. Have I got that right?
> >
> > [1] https://www.kernel.org/doc/html/latest/kbuild/kconfig-language.html#menu-attributes
> >
>
> Yes, that seems right. That makes me wonder why this would have been enabled in
> the Arch Linux kernel for x86 then.
Not sure, maybe the Arch devs like Lego? ;-)
Are you happy to give an Acked-by for this anyhoo?
@Sebastian, are you happy to pick up this patch?
Best,
Alex
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] power: supply: Add dependency to lego-ev3-battery Kconfig options
2020-08-17 17:43 ` Alex Dewar
@ 2020-08-17 18:25 ` David Lechner
2020-08-25 13:58 ` Sebastian Reichel
0 siblings, 1 reply; 9+ messages in thread
From: David Lechner @ 2020-08-17 18:25 UTC (permalink / raw)
To: Alex Dewar
Cc: Sebastian Reichel, linux-pm, linux-kernel, Sekhar Nori,
Bartosz Go??aszewski
On 8/17/20 12:43 PM, Alex Dewar wrote:
> On Wed, Aug 12, 2020 at 02:12:57PM -0500, David Lechner wrote:
>> On 8/12/20 2:02 PM, Alex Dewar wrote:
>>> On Wed, Aug 12, 2020 at 10:24:30AM -0500, David Lechner wrote:
>>>> On 8/12/20 8:37 AM, Alex Dewar wrote:
>>>>> On Tue, Aug 11, 2020 at 09:24:10AM -0500, David Lechner wrote:
>>>>>> On 8/9/20 1:54 PM, Alex Dewar wrote:
>>>>>>> This battery appears only to be used by a single board (DA850), so it
>>>>>>> makes sense to add this to the Kconfig file so that users don't build
>>>>>>> the module unnecessarily. It currently seems to be built for the x86
>>>>>>> Arch Linux kernel where it's probably not doing much good.
>>>>>>
>>>>>> It would probably also make sense to add "default n" since it only
>>>>>> applies to one board in the entire arch.
>>>>>
>>>>> Ah ok. That makes sense. Would you like me to send a follow-on patch for
>>>>> this?
>>>>
>>>> You can just send a v2 patch that includes the change below and the
>>>> additional change.
>>>
>>> I've just had a look at the documentation[1] and it seems that as there's
>>> no "default y" there it'll default to n anyway. Have I got that right?
>>>
>>> [1] https://www.kernel.org/doc/html/latest/kbuild/kconfig-language.html#menu-attributes
>>>
>>
>> Yes, that seems right. That makes me wonder why this would have been enabled in
>> the Arch Linux kernel for x86 then.
>
> Not sure, maybe the Arch devs like Lego? ;-)
>
> Are you happy to give an Acked-by for this anyhoo?
Yup.
Acked-by: David Lechner <david@lechnology.com>
>
> @Sebastian, are you happy to pick up this patch?
>
> Best,
> Alex
>
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] power: supply: Add dependency to lego-ev3-battery Kconfig options
2020-08-17 18:25 ` David Lechner
@ 2020-08-25 13:58 ` Sebastian Reichel
0 siblings, 0 replies; 9+ messages in thread
From: Sebastian Reichel @ 2020-08-25 13:58 UTC (permalink / raw)
To: David Lechner
Cc: Alex Dewar, linux-pm, linux-kernel, Sekhar Nori, Bartosz Go??aszewski
[-- Attachment #1: Type: text/plain, Size: 148 bytes --]
Hi,
On Mon, Aug 17, 2020 at 01:25:45PM -0500, David Lechner wrote:
> Acked-by: David Lechner <david@lechnology.com>
Thanks, queued.
-- Sebastian
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2020-08-25 13:59 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-09 18:54 [PATCH] power: supply: Add dependency to lego-ev3-battery Kconfig options Alex Dewar
2020-08-11 14:24 ` David Lechner
2020-08-12 13:37 ` Alex Dewar
2020-08-12 15:24 ` David Lechner
2020-08-12 19:02 ` Alex Dewar
2020-08-12 19:12 ` David Lechner
2020-08-17 17:43 ` Alex Dewar
2020-08-17 18:25 ` David Lechner
2020-08-25 13:58 ` Sebastian Reichel
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.