* [PATCH V3 1/2] dt-bindings: Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge
@ 2020-08-09 10:57 ` Marek Vasut
0 siblings, 0 replies; 14+ messages in thread
From: Marek Vasut @ 2020-08-09 10:57 UTC (permalink / raw)
To: dri-devel; +Cc: Marek Vasut, Eric Anholt, Rob Herring, Sam Ravnborg, devicetree
Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge, this
one is used in the Raspberry Pi 7" touchscreen display unit.
Signed-off-by: Marek Vasut <marex@denx.de>
To: dri-devel@lists.freedesktop.org
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
---
V2: Fix dt_binding_check errors
V3: Add ... at the end of example
---
.../display/bridge/toshiba,tc358762.yaml | 127 ++++++++++++++++++
1 file changed, 127 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
new file mode 100644
index 000000000000..195025e6803c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358762.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358762 MIPI DSI to MIPI DPI bridge
+
+maintainers:
+ - Marek Vasut <marex@denx.de>
+
+description: |
+ The TC358762 is bridge device which converts MIPI DSI to MIPI DPI.
+
+properties:
+ compatible:
+ enum:
+ - toshiba,tc358762
+
+ reg:
+ maxItems: 1
+ description: virtual channel number of a DSI peripheral
+
+ vddc-supply:
+ description: Regulator for 1.2V internal core power.
+
+ ports:
+ type: object
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ port@0:
+ type: object
+ additionalProperties: false
+
+ description: |
+ Video port for MIPI DSI input
+
+ properties:
+ reg:
+ const: 0
+
+ patternProperties:
+ endpoint:
+ type: object
+ additionalProperties: false
+
+ properties:
+ remote-endpoint: true
+
+ required:
+ - reg
+
+ port@1:
+ type: object
+ additionalProperties: false
+
+ description: |
+ Video port for MIPI DPI output (panel or connector).
+
+ properties:
+ reg:
+ const: 1
+
+ patternProperties:
+ endpoint:
+ type: object
+ additionalProperties: false
+
+ properties:
+ remote-endpoint: true
+
+ required:
+ - reg
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - vddc-supply
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@0 {
+ reg = <0>;
+ compatible = "toshiba,tc358762";
+ vddc-supply = <&vcc_1v2_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ bridge_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ bridge_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+ };
+
+...
--
2.28.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH V3 1/2] dt-bindings: Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge
@ 2020-08-09 10:57 ` Marek Vasut
0 siblings, 0 replies; 14+ messages in thread
From: Marek Vasut @ 2020-08-09 10:57 UTC (permalink / raw)
To: dri-devel; +Cc: Marek Vasut, Rob Herring, Sam Ravnborg, devicetree
Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge, this
one is used in the Raspberry Pi 7" touchscreen display unit.
Signed-off-by: Marek Vasut <marex@denx.de>
To: dri-devel@lists.freedesktop.org
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
---
V2: Fix dt_binding_check errors
V3: Add ... at the end of example
---
.../display/bridge/toshiba,tc358762.yaml | 127 ++++++++++++++++++
1 file changed, 127 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
new file mode 100644
index 000000000000..195025e6803c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
@@ -0,0 +1,127 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358762.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Toshiba TC358762 MIPI DSI to MIPI DPI bridge
+
+maintainers:
+ - Marek Vasut <marex@denx.de>
+
+description: |
+ The TC358762 is bridge device which converts MIPI DSI to MIPI DPI.
+
+properties:
+ compatible:
+ enum:
+ - toshiba,tc358762
+
+ reg:
+ maxItems: 1
+ description: virtual channel number of a DSI peripheral
+
+ vddc-supply:
+ description: Regulator for 1.2V internal core power.
+
+ ports:
+ type: object
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ port@0:
+ type: object
+ additionalProperties: false
+
+ description: |
+ Video port for MIPI DSI input
+
+ properties:
+ reg:
+ const: 0
+
+ patternProperties:
+ endpoint:
+ type: object
+ additionalProperties: false
+
+ properties:
+ remote-endpoint: true
+
+ required:
+ - reg
+
+ port@1:
+ type: object
+ additionalProperties: false
+
+ description: |
+ Video port for MIPI DPI output (panel or connector).
+
+ properties:
+ reg:
+ const: 1
+
+ patternProperties:
+ endpoint:
+ type: object
+ additionalProperties: false
+
+ properties:
+ remote-endpoint: true
+
+ required:
+ - reg
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - vddc-supply
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bridge@0 {
+ reg = <0>;
+ compatible = "toshiba,tc358762";
+ vddc-supply = <&vcc_1v2_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ bridge_in: endpoint {
+ remote-endpoint = <&dsi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ bridge_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+ };
+ };
+
+...
--
2.28.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH V3 2/2] drm/bridge: tc358762: Add basic driver for Toshiba TC358762 DSI-to-DPI bridge
2020-08-09 10:57 ` Marek Vasut
@ 2020-08-09 10:57 ` Marek Vasut
-1 siblings, 0 replies; 14+ messages in thread
From: Marek Vasut @ 2020-08-09 10:57 UTC (permalink / raw)
To: dri-devel; +Cc: Marek Vasut, Eric Anholt, Rob Herring, Sam Ravnborg, devicetree
Add very basic driver for Toshiba TC358762 DSI-to-DPI bridge, derived
from tc358764 driver and panel-raspberrypi-touchscreen. This driver is
meant to replace the panel-raspberrypi-touchscreen too, as the bridge
connection can be described in DT too.
Signed-off-by: Marek Vasut <marex@denx.de>
To: dri-devel@lists.freedesktop.org
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
---
V2: Switch to DRM_PANEL_BRIDGE
V3: No change
---
drivers/gpu/drm/bridge/Kconfig | 8 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/tc358762.c | 280 ++++++++++++++++++++++++++++++
3 files changed, 289 insertions(+)
create mode 100644 drivers/gpu/drm/bridge/tc358762.c
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 43271c21d3fc..58e879852082 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -153,6 +153,14 @@ config DRM_THINE_THC63LVD1024
help
Thine THC63LVD1024 LVDS/parallel converter driver.
+config DRM_TOSHIBA_TC358762
+ tristate "TC358762 DSI/DPI bridge"
+ depends on OF
+ select DRM_MIPI_DSI
+ select DRM_PANEL_BRIDGE
+ help
+ Toshiba TC358762 DSI/DPI bridge driver.
+
config DRM_TOSHIBA_TC358764
tristate "TC358764 DSI/LVDS bridge"
depends on OF
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index d63d4b7e4347..b341c60ee96a 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_DRM_SII902X) += sii902x.o
obj-$(CONFIG_DRM_SII9234) += sii9234.o
obj-$(CONFIG_DRM_SIMPLE_BRIDGE) += simple-bridge.o
obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o
+obj-$(CONFIG_DRM_TOSHIBA_TC358762) += tc358762.o
obj-$(CONFIG_DRM_TOSHIBA_TC358764) += tc358764.o
obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
obj-$(CONFIG_DRM_TOSHIBA_TC358768) += tc358768.o
diff --git a/drivers/gpu/drm/bridge/tc358762.c b/drivers/gpu/drm/bridge/tc358762.c
new file mode 100644
index 000000000000..1bfdfc6affaf
--- /dev/null
+++ b/drivers/gpu/drm/bridge/tc358762.c
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ *
+ * Based on tc358764.c by
+ * Andrzej Hajda <a.hajda@samsung.com>
+ * Maciej Purski <m.purski@samsung.com>
+ *
+ * Based on rpi_touchscreen.c by
+ * Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+
+/* PPI layer registers */
+#define PPI_STARTPPI 0x0104 /* START control bit */
+#define PPI_LPTXTIMECNT 0x0114 /* LPTX timing signal */
+#define PPI_D0S_ATMR 0x0144
+#define PPI_D1S_ATMR 0x0148
+#define PPI_D0S_CLRSIPOCOUNT 0x0164 /* Assertion timer for Lane 0 */
+#define PPI_D1S_CLRSIPOCOUNT 0x0168 /* Assertion timer for Lane 1 */
+#define PPI_START_FUNCTION 1
+
+/* DSI layer registers */
+#define DSI_STARTDSI 0x0204 /* START control bit of DSI-TX */
+#define DSI_LANEENABLE 0x0210 /* Enables each lane */
+#define DSI_RX_START 1
+
+/* LCDC/DPI Host Registers */
+#define LCDCTRL 0x0420
+
+/* SPI Master Registers */
+#define SPICMR 0x0450
+#define SPITCR 0x0454
+
+/* System Controller Registers */
+#define SYSCTRL 0x0464
+
+/* System registers */
+#define LPX_PERIOD 3
+
+/* Lane enable PPI and DSI register bits */
+#define LANEENABLE_CLEN BIT(0)
+#define LANEENABLE_L0EN BIT(1)
+#define LANEENABLE_L1EN BIT(2)
+
+struct tc358762 {
+ struct device *dev;
+ struct drm_bridge bridge;
+ struct drm_connector connector;
+ struct regulator *regulator;
+ struct drm_bridge *panel_bridge;
+ bool pre_enabled;
+ int error;
+};
+
+static int tc358762_clear_error(struct tc358762 *ctx)
+{
+ int ret = ctx->error;
+
+ ctx->error = 0;
+ return ret;
+}
+
+static void tc358762_write(struct tc358762 *ctx, u16 addr, u32 val)
+{
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+ ssize_t ret;
+ u8 data[6];
+
+ if (ctx->error)
+ return;
+
+ data[0] = addr;
+ data[1] = addr >> 8;
+ data[2] = val;
+ data[3] = val >> 8;
+ data[4] = val >> 16;
+ data[5] = val >> 24;
+
+ ret = mipi_dsi_generic_write(dsi, data, sizeof(data));
+ if (ret < 0)
+ ctx->error = ret;
+}
+
+static inline struct tc358762 *bridge_to_tc358762(struct drm_bridge *bridge)
+{
+ return container_of(bridge, struct tc358762, bridge);
+}
+
+static int tc358762_init(struct tc358762 *ctx)
+{
+ tc358762_write(ctx, DSI_LANEENABLE,
+ LANEENABLE_L0EN | LANEENABLE_CLEN);
+ tc358762_write(ctx, PPI_D0S_CLRSIPOCOUNT, 5);
+ tc358762_write(ctx, PPI_D1S_CLRSIPOCOUNT, 5);
+ tc358762_write(ctx, PPI_D0S_ATMR, 0);
+ tc358762_write(ctx, PPI_D1S_ATMR, 0);
+ tc358762_write(ctx, PPI_LPTXTIMECNT, LPX_PERIOD);
+
+ tc358762_write(ctx, SPICMR, 0x00);
+ tc358762_write(ctx, LCDCTRL, 0x00100150);
+ tc358762_write(ctx, SYSCTRL, 0x040f);
+ msleep(100);
+
+ tc358762_write(ctx, PPI_STARTPPI, PPI_START_FUNCTION);
+ tc358762_write(ctx, DSI_STARTDSI, DSI_RX_START);
+
+ msleep(100);
+
+ return tc358762_clear_error(ctx);
+}
+
+static void tc358762_post_disable(struct drm_bridge *bridge)
+{
+ struct tc358762 *ctx = bridge_to_tc358762(bridge);
+ int ret;
+
+ /*
+ * The post_disable hook might be called multiple times.
+ * We want to avoid regulator imbalance below.
+ */
+ if (!ctx->pre_enabled)
+ return;
+
+ ctx->pre_enabled = false;
+
+ ret = regulator_disable(ctx->regulator);
+ if (ret < 0)
+ dev_err(ctx->dev, "error disabling regulators (%d)\n", ret);
+}
+
+static void tc358762_pre_enable(struct drm_bridge *bridge)
+{
+ struct tc358762 *ctx = bridge_to_tc358762(bridge);
+ int ret;
+
+ ret = regulator_enable(ctx->regulator);
+ if (ret < 0)
+ dev_err(ctx->dev, "error enabling regulators (%d)\n", ret);
+
+ ret = tc358762_init(ctx);
+ if (ret < 0)
+ dev_err(ctx->dev, "error initializing bridge (%d)\n", ret);
+
+ ctx->pre_enabled = true;
+}
+
+static int tc358762_attach(struct drm_bridge *bridge,
+ enum drm_bridge_attach_flags flags)
+{
+ struct tc358762 *ctx = bridge_to_tc358762(bridge);
+
+ return drm_bridge_attach(bridge->encoder, ctx->panel_bridge,
+ bridge, flags);
+}
+
+static const struct drm_bridge_funcs tc358762_bridge_funcs = {
+ .post_disable = tc358762_post_disable,
+ .pre_enable = tc358762_pre_enable,
+ .attach = tc358762_attach,
+};
+
+static int tc358762_parse_dt(struct tc358762 *ctx)
+{
+ struct drm_bridge *panel_bridge;
+ struct device *dev = ctx->dev;
+ struct drm_panel *panel;
+ int ret;
+
+ ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
+ if (ret)
+ return ret;
+
+ panel_bridge = devm_drm_panel_bridge_add(dev, panel);
+
+ if (IS_ERR(panel_bridge))
+ return PTR_ERR(panel_bridge);
+
+ ctx->panel_bridge = panel_bridge;
+
+ return 0;
+}
+
+static int tc358762_configure_regulators(struct tc358762 *ctx)
+{
+ ctx->regulator = devm_regulator_get(ctx->dev, "vddc");
+ if (IS_ERR(ctx->regulator))
+ return PTR_ERR(ctx->regulator);
+
+ return 0;
+}
+
+static int tc358762_probe(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ struct tc358762 *ctx;
+ int ret;
+
+ ctx = devm_kzalloc(dev, sizeof(struct tc358762), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ ctx->dev = dev;
+ ctx->pre_enabled = false;
+
+ /* TODO: Find out how to get dual-lane mode working */
+ dsi->lanes = 1;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+ MIPI_DSI_MODE_LPM;
+
+ ret = tc358762_parse_dt(ctx);
+ if (ret < 0)
+ return ret;
+
+ ret = tc358762_configure_regulators(ctx);
+ if (ret < 0)
+ return ret;
+
+ ctx->bridge.funcs = &tc358762_bridge_funcs;
+ ctx->bridge.type = DRM_MODE_CONNECTOR_DPI;
+ ctx->bridge.of_node = dev->of_node;
+
+ drm_bridge_add(&ctx->bridge);
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ drm_bridge_remove(&ctx->bridge);
+ dev_err(dev, "failed to attach dsi\n");
+ }
+
+ return ret;
+}
+
+static int tc358762_remove(struct mipi_dsi_device *dsi)
+{
+ struct tc358762 *ctx = mipi_dsi_get_drvdata(dsi);
+
+ mipi_dsi_detach(dsi);
+ drm_bridge_remove(&ctx->bridge);
+
+ return 0;
+}
+
+static const struct of_device_id tc358762_of_match[] = {
+ { .compatible = "toshiba,tc358762" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, tc358762_of_match);
+
+static struct mipi_dsi_driver tc358762_driver = {
+ .probe = tc358762_probe,
+ .remove = tc358762_remove,
+ .driver = {
+ .name = "tc358762",
+ .of_match_table = tc358762_of_match,
+ },
+};
+module_mipi_dsi_driver(tc358762_driver);
+
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_DESCRIPTION("MIPI-DSI based Driver for TC358762 DSI/DPI Bridge");
+MODULE_LICENSE("GPL v2");
--
2.28.0
^ permalink raw reply related [flat|nested] 14+ messages in thread
* [PATCH V3 2/2] drm/bridge: tc358762: Add basic driver for Toshiba TC358762 DSI-to-DPI bridge
@ 2020-08-09 10:57 ` Marek Vasut
0 siblings, 0 replies; 14+ messages in thread
From: Marek Vasut @ 2020-08-09 10:57 UTC (permalink / raw)
To: dri-devel; +Cc: Marek Vasut, Rob Herring, Sam Ravnborg, devicetree
Add very basic driver for Toshiba TC358762 DSI-to-DPI bridge, derived
from tc358764 driver and panel-raspberrypi-touchscreen. This driver is
meant to replace the panel-raspberrypi-touchscreen too, as the bridge
connection can be described in DT too.
Signed-off-by: Marek Vasut <marex@denx.de>
To: dri-devel@lists.freedesktop.org
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
---
V2: Switch to DRM_PANEL_BRIDGE
V3: No change
---
drivers/gpu/drm/bridge/Kconfig | 8 +
drivers/gpu/drm/bridge/Makefile | 1 +
drivers/gpu/drm/bridge/tc358762.c | 280 ++++++++++++++++++++++++++++++
3 files changed, 289 insertions(+)
create mode 100644 drivers/gpu/drm/bridge/tc358762.c
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
index 43271c21d3fc..58e879852082 100644
--- a/drivers/gpu/drm/bridge/Kconfig
+++ b/drivers/gpu/drm/bridge/Kconfig
@@ -153,6 +153,14 @@ config DRM_THINE_THC63LVD1024
help
Thine THC63LVD1024 LVDS/parallel converter driver.
+config DRM_TOSHIBA_TC358762
+ tristate "TC358762 DSI/DPI bridge"
+ depends on OF
+ select DRM_MIPI_DSI
+ select DRM_PANEL_BRIDGE
+ help
+ Toshiba TC358762 DSI/DPI bridge driver.
+
config DRM_TOSHIBA_TC358764
tristate "TC358764 DSI/LVDS bridge"
depends on OF
diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
index d63d4b7e4347..b341c60ee96a 100644
--- a/drivers/gpu/drm/bridge/Makefile
+++ b/drivers/gpu/drm/bridge/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_DRM_SII902X) += sii902x.o
obj-$(CONFIG_DRM_SII9234) += sii9234.o
obj-$(CONFIG_DRM_SIMPLE_BRIDGE) += simple-bridge.o
obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o
+obj-$(CONFIG_DRM_TOSHIBA_TC358762) += tc358762.o
obj-$(CONFIG_DRM_TOSHIBA_TC358764) += tc358764.o
obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
obj-$(CONFIG_DRM_TOSHIBA_TC358768) += tc358768.o
diff --git a/drivers/gpu/drm/bridge/tc358762.c b/drivers/gpu/drm/bridge/tc358762.c
new file mode 100644
index 000000000000..1bfdfc6affaf
--- /dev/null
+++ b/drivers/gpu/drm/bridge/tc358762.c
@@ -0,0 +1,280 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ *
+ * Based on tc358764.c by
+ * Andrzej Hajda <a.hajda@samsung.com>
+ * Maciej Purski <m.purski@samsung.com>
+ *
+ * Based on rpi_touchscreen.c by
+ * Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/of_graph.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/mipi_display.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc.h>
+#include <drm/drm_fb_helper.h>
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_of.h>
+#include <drm/drm_panel.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+
+/* PPI layer registers */
+#define PPI_STARTPPI 0x0104 /* START control bit */
+#define PPI_LPTXTIMECNT 0x0114 /* LPTX timing signal */
+#define PPI_D0S_ATMR 0x0144
+#define PPI_D1S_ATMR 0x0148
+#define PPI_D0S_CLRSIPOCOUNT 0x0164 /* Assertion timer for Lane 0 */
+#define PPI_D1S_CLRSIPOCOUNT 0x0168 /* Assertion timer for Lane 1 */
+#define PPI_START_FUNCTION 1
+
+/* DSI layer registers */
+#define DSI_STARTDSI 0x0204 /* START control bit of DSI-TX */
+#define DSI_LANEENABLE 0x0210 /* Enables each lane */
+#define DSI_RX_START 1
+
+/* LCDC/DPI Host Registers */
+#define LCDCTRL 0x0420
+
+/* SPI Master Registers */
+#define SPICMR 0x0450
+#define SPITCR 0x0454
+
+/* System Controller Registers */
+#define SYSCTRL 0x0464
+
+/* System registers */
+#define LPX_PERIOD 3
+
+/* Lane enable PPI and DSI register bits */
+#define LANEENABLE_CLEN BIT(0)
+#define LANEENABLE_L0EN BIT(1)
+#define LANEENABLE_L1EN BIT(2)
+
+struct tc358762 {
+ struct device *dev;
+ struct drm_bridge bridge;
+ struct drm_connector connector;
+ struct regulator *regulator;
+ struct drm_bridge *panel_bridge;
+ bool pre_enabled;
+ int error;
+};
+
+static int tc358762_clear_error(struct tc358762 *ctx)
+{
+ int ret = ctx->error;
+
+ ctx->error = 0;
+ return ret;
+}
+
+static void tc358762_write(struct tc358762 *ctx, u16 addr, u32 val)
+{
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+ ssize_t ret;
+ u8 data[6];
+
+ if (ctx->error)
+ return;
+
+ data[0] = addr;
+ data[1] = addr >> 8;
+ data[2] = val;
+ data[3] = val >> 8;
+ data[4] = val >> 16;
+ data[5] = val >> 24;
+
+ ret = mipi_dsi_generic_write(dsi, data, sizeof(data));
+ if (ret < 0)
+ ctx->error = ret;
+}
+
+static inline struct tc358762 *bridge_to_tc358762(struct drm_bridge *bridge)
+{
+ return container_of(bridge, struct tc358762, bridge);
+}
+
+static int tc358762_init(struct tc358762 *ctx)
+{
+ tc358762_write(ctx, DSI_LANEENABLE,
+ LANEENABLE_L0EN | LANEENABLE_CLEN);
+ tc358762_write(ctx, PPI_D0S_CLRSIPOCOUNT, 5);
+ tc358762_write(ctx, PPI_D1S_CLRSIPOCOUNT, 5);
+ tc358762_write(ctx, PPI_D0S_ATMR, 0);
+ tc358762_write(ctx, PPI_D1S_ATMR, 0);
+ tc358762_write(ctx, PPI_LPTXTIMECNT, LPX_PERIOD);
+
+ tc358762_write(ctx, SPICMR, 0x00);
+ tc358762_write(ctx, LCDCTRL, 0x00100150);
+ tc358762_write(ctx, SYSCTRL, 0x040f);
+ msleep(100);
+
+ tc358762_write(ctx, PPI_STARTPPI, PPI_START_FUNCTION);
+ tc358762_write(ctx, DSI_STARTDSI, DSI_RX_START);
+
+ msleep(100);
+
+ return tc358762_clear_error(ctx);
+}
+
+static void tc358762_post_disable(struct drm_bridge *bridge)
+{
+ struct tc358762 *ctx = bridge_to_tc358762(bridge);
+ int ret;
+
+ /*
+ * The post_disable hook might be called multiple times.
+ * We want to avoid regulator imbalance below.
+ */
+ if (!ctx->pre_enabled)
+ return;
+
+ ctx->pre_enabled = false;
+
+ ret = regulator_disable(ctx->regulator);
+ if (ret < 0)
+ dev_err(ctx->dev, "error disabling regulators (%d)\n", ret);
+}
+
+static void tc358762_pre_enable(struct drm_bridge *bridge)
+{
+ struct tc358762 *ctx = bridge_to_tc358762(bridge);
+ int ret;
+
+ ret = regulator_enable(ctx->regulator);
+ if (ret < 0)
+ dev_err(ctx->dev, "error enabling regulators (%d)\n", ret);
+
+ ret = tc358762_init(ctx);
+ if (ret < 0)
+ dev_err(ctx->dev, "error initializing bridge (%d)\n", ret);
+
+ ctx->pre_enabled = true;
+}
+
+static int tc358762_attach(struct drm_bridge *bridge,
+ enum drm_bridge_attach_flags flags)
+{
+ struct tc358762 *ctx = bridge_to_tc358762(bridge);
+
+ return drm_bridge_attach(bridge->encoder, ctx->panel_bridge,
+ bridge, flags);
+}
+
+static const struct drm_bridge_funcs tc358762_bridge_funcs = {
+ .post_disable = tc358762_post_disable,
+ .pre_enable = tc358762_pre_enable,
+ .attach = tc358762_attach,
+};
+
+static int tc358762_parse_dt(struct tc358762 *ctx)
+{
+ struct drm_bridge *panel_bridge;
+ struct device *dev = ctx->dev;
+ struct drm_panel *panel;
+ int ret;
+
+ ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
+ if (ret)
+ return ret;
+
+ panel_bridge = devm_drm_panel_bridge_add(dev, panel);
+
+ if (IS_ERR(panel_bridge))
+ return PTR_ERR(panel_bridge);
+
+ ctx->panel_bridge = panel_bridge;
+
+ return 0;
+}
+
+static int tc358762_configure_regulators(struct tc358762 *ctx)
+{
+ ctx->regulator = devm_regulator_get(ctx->dev, "vddc");
+ if (IS_ERR(ctx->regulator))
+ return PTR_ERR(ctx->regulator);
+
+ return 0;
+}
+
+static int tc358762_probe(struct mipi_dsi_device *dsi)
+{
+ struct device *dev = &dsi->dev;
+ struct tc358762 *ctx;
+ int ret;
+
+ ctx = devm_kzalloc(dev, sizeof(struct tc358762), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ mipi_dsi_set_drvdata(dsi, ctx);
+
+ ctx->dev = dev;
+ ctx->pre_enabled = false;
+
+ /* TODO: Find out how to get dual-lane mode working */
+ dsi->lanes = 1;
+ dsi->format = MIPI_DSI_FMT_RGB888;
+ dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
+ MIPI_DSI_MODE_LPM;
+
+ ret = tc358762_parse_dt(ctx);
+ if (ret < 0)
+ return ret;
+
+ ret = tc358762_configure_regulators(ctx);
+ if (ret < 0)
+ return ret;
+
+ ctx->bridge.funcs = &tc358762_bridge_funcs;
+ ctx->bridge.type = DRM_MODE_CONNECTOR_DPI;
+ ctx->bridge.of_node = dev->of_node;
+
+ drm_bridge_add(&ctx->bridge);
+
+ ret = mipi_dsi_attach(dsi);
+ if (ret < 0) {
+ drm_bridge_remove(&ctx->bridge);
+ dev_err(dev, "failed to attach dsi\n");
+ }
+
+ return ret;
+}
+
+static int tc358762_remove(struct mipi_dsi_device *dsi)
+{
+ struct tc358762 *ctx = mipi_dsi_get_drvdata(dsi);
+
+ mipi_dsi_detach(dsi);
+ drm_bridge_remove(&ctx->bridge);
+
+ return 0;
+}
+
+static const struct of_device_id tc358762_of_match[] = {
+ { .compatible = "toshiba,tc358762" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, tc358762_of_match);
+
+static struct mipi_dsi_driver tc358762_driver = {
+ .probe = tc358762_probe,
+ .remove = tc358762_remove,
+ .driver = {
+ .name = "tc358762",
+ .of_match_table = tc358762_of_match,
+ },
+};
+module_mipi_dsi_driver(tc358762_driver);
+
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_DESCRIPTION("MIPI-DSI based Driver for TC358762 DSI/DPI Bridge");
+MODULE_LICENSE("GPL v2");
--
2.28.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 14+ messages in thread
* Re: [PATCH V3 1/2] dt-bindings: Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge
2020-08-09 10:57 ` Marek Vasut
@ 2020-08-12 19:48 ` Rob Herring
-1 siblings, 0 replies; 14+ messages in thread
From: Rob Herring @ 2020-08-12 19:48 UTC (permalink / raw)
To: Marek Vasut; +Cc: Rob Herring, devicetree, dri-devel, Sam Ravnborg
On Sun, 09 Aug 2020 12:57:04 +0200, Marek Vasut wrote:
> Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge, this
> one is used in the Raspberry Pi 7" touchscreen display unit.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> To: dri-devel@lists.freedesktop.org
> Cc: Eric Anholt <eric@anholt.net>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: devicetree@vger.kernel.org
> ---
> V2: Fix dt_binding_check errors
> V3: Add ... at the end of example
> ---
> .../display/bridge/toshiba,tc358762.yaml | 127 ++++++++++++++++++
> 1 file changed, 127 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH V3 1/2] dt-bindings: Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge
@ 2020-08-12 19:48 ` Rob Herring
0 siblings, 0 replies; 14+ messages in thread
From: Rob Herring @ 2020-08-12 19:48 UTC (permalink / raw)
To: Marek Vasut; +Cc: devicetree, Rob Herring, Sam Ravnborg, dri-devel
On Sun, 09 Aug 2020 12:57:04 +0200, Marek Vasut wrote:
> Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge, this
> one is used in the Raspberry Pi 7" touchscreen display unit.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> To: dri-devel@lists.freedesktop.org
> Cc: Eric Anholt <eric@anholt.net>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: devicetree@vger.kernel.org
> ---
> V2: Fix dt_binding_check errors
> V3: Add ... at the end of example
> ---
> .../display/bridge/toshiba,tc358762.yaml | 127 ++++++++++++++++++
> 1 file changed, 127 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
>
Reviewed-by: Rob Herring <robh@kernel.org>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH V3 1/2] dt-bindings: Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge
2020-08-09 10:57 ` Marek Vasut
@ 2020-08-12 20:07 ` Sam Ravnborg
-1 siblings, 0 replies; 14+ messages in thread
From: Sam Ravnborg @ 2020-08-12 20:07 UTC (permalink / raw)
To: Marek Vasut; +Cc: dri-devel, Eric Anholt, Rob Herring, devicetree
Hi Marek.
On Sun, Aug 09, 2020 at 12:57:04PM +0200, Marek Vasut wrote:
> Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge, this
> one is used in the Raspberry Pi 7" touchscreen display unit.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> To: dri-devel@lists.freedesktop.org
> Cc: Eric Anholt <eric@anholt.net>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: devicetree@vger.kernel.org
> ---
> V2: Fix dt_binding_check errors
> V3: Add ... at the end of example
With Rob's r-b it is now applied to drm-misc-next.
Sam
> ---
> .../display/bridge/toshiba,tc358762.yaml | 127 ++++++++++++++++++
> 1 file changed, 127 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
> new file mode 100644
> index 000000000000..195025e6803c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
> @@ -0,0 +1,127 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358762.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Toshiba TC358762 MIPI DSI to MIPI DPI bridge
> +
> +maintainers:
> + - Marek Vasut <marex@denx.de>
> +
> +description: |
> + The TC358762 is bridge device which converts MIPI DSI to MIPI DPI.
> +
> +properties:
> + compatible:
> + enum:
> + - toshiba,tc358762
> +
> + reg:
> + maxItems: 1
> + description: virtual channel number of a DSI peripheral
> +
> + vddc-supply:
> + description: Regulator for 1.2V internal core power.
> +
> + ports:
> + type: object
> +
> + properties:
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + port@0:
> + type: object
> + additionalProperties: false
> +
> + description: |
> + Video port for MIPI DSI input
> +
> + properties:
> + reg:
> + const: 0
> +
> + patternProperties:
> + endpoint:
> + type: object
> + additionalProperties: false
> +
> + properties:
> + remote-endpoint: true
> +
> + required:
> + - reg
> +
> + port@1:
> + type: object
> + additionalProperties: false
> +
> + description: |
> + Video port for MIPI DPI output (panel or connector).
> +
> + properties:
> + reg:
> + const: 1
> +
> + patternProperties:
> + endpoint:
> + type: object
> + additionalProperties: false
> +
> + properties:
> + remote-endpoint: true
> +
> + required:
> + - reg
> +
> + required:
> + - "#address-cells"
> + - "#size-cells"
> + - port@0
> + - port@1
> +
> +required:
> + - compatible
> + - reg
> + - vddc-supply
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + i2c1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + bridge@0 {
> + reg = <0>;
> + compatible = "toshiba,tc358762";
> + vddc-supply = <&vcc_1v2_reg>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + bridge_in: endpoint {
> + remote-endpoint = <&dsi_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + bridge_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> + };
> + };
> +
> +...
> --
> 2.28.0
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH V3 1/2] dt-bindings: Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge
@ 2020-08-12 20:07 ` Sam Ravnborg
0 siblings, 0 replies; 14+ messages in thread
From: Sam Ravnborg @ 2020-08-12 20:07 UTC (permalink / raw)
To: Marek Vasut; +Cc: Rob Herring, dri-devel, devicetree
Hi Marek.
On Sun, Aug 09, 2020 at 12:57:04PM +0200, Marek Vasut wrote:
> Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge, this
> one is used in the Raspberry Pi 7" touchscreen display unit.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> To: dri-devel@lists.freedesktop.org
> Cc: Eric Anholt <eric@anholt.net>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: devicetree@vger.kernel.org
> ---
> V2: Fix dt_binding_check errors
> V3: Add ... at the end of example
With Rob's r-b it is now applied to drm-misc-next.
Sam
> ---
> .../display/bridge/toshiba,tc358762.yaml | 127 ++++++++++++++++++
> 1 file changed, 127 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
> new file mode 100644
> index 000000000000..195025e6803c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
> @@ -0,0 +1,127 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358762.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Toshiba TC358762 MIPI DSI to MIPI DPI bridge
> +
> +maintainers:
> + - Marek Vasut <marex@denx.de>
> +
> +description: |
> + The TC358762 is bridge device which converts MIPI DSI to MIPI DPI.
> +
> +properties:
> + compatible:
> + enum:
> + - toshiba,tc358762
> +
> + reg:
> + maxItems: 1
> + description: virtual channel number of a DSI peripheral
> +
> + vddc-supply:
> + description: Regulator for 1.2V internal core power.
> +
> + ports:
> + type: object
> +
> + properties:
> + "#address-cells":
> + const: 1
> +
> + "#size-cells":
> + const: 0
> +
> + port@0:
> + type: object
> + additionalProperties: false
> +
> + description: |
> + Video port for MIPI DSI input
> +
> + properties:
> + reg:
> + const: 0
> +
> + patternProperties:
> + endpoint:
> + type: object
> + additionalProperties: false
> +
> + properties:
> + remote-endpoint: true
> +
> + required:
> + - reg
> +
> + port@1:
> + type: object
> + additionalProperties: false
> +
> + description: |
> + Video port for MIPI DPI output (panel or connector).
> +
> + properties:
> + reg:
> + const: 1
> +
> + patternProperties:
> + endpoint:
> + type: object
> + additionalProperties: false
> +
> + properties:
> + remote-endpoint: true
> +
> + required:
> + - reg
> +
> + required:
> + - "#address-cells"
> + - "#size-cells"
> + - port@0
> + - port@1
> +
> +required:
> + - compatible
> + - reg
> + - vddc-supply
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + i2c1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + bridge@0 {
> + reg = <0>;
> + compatible = "toshiba,tc358762";
> + vddc-supply = <&vcc_1v2_reg>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + bridge_in: endpoint {
> + remote-endpoint = <&dsi_out>;
> + };
> + };
> +
> + port@1 {
> + reg = <1>;
> + bridge_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> + };
> + };
> +
> +...
> --
> 2.28.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH V3 2/2] drm/bridge: tc358762: Add basic driver for Toshiba TC358762 DSI-to-DPI bridge
2020-08-09 10:57 ` Marek Vasut
@ 2020-08-12 20:08 ` Sam Ravnborg
-1 siblings, 0 replies; 14+ messages in thread
From: Sam Ravnborg @ 2020-08-12 20:08 UTC (permalink / raw)
To: Marek Vasut; +Cc: dri-devel, Eric Anholt, Rob Herring, devicetree
Hi Marek.
On Sun, Aug 09, 2020 at 12:57:05PM +0200, Marek Vasut wrote:
> Add very basic driver for Toshiba TC358762 DSI-to-DPI bridge, derived
> from tc358764 driver and panel-raspberrypi-touchscreen. This driver is
> meant to replace the panel-raspberrypi-touchscreen too, as the bridge
> connection can be described in DT too.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> To: dri-devel@lists.freedesktop.org
> Cc: Eric Anholt <eric@anholt.net>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: devicetree@vger.kernel.org
> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> ---
> V2: Switch to DRM_PANEL_BRIDGE
> V3: No change
Applied to drm-misc-next.
Sam
> ---
> drivers/gpu/drm/bridge/Kconfig | 8 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/tc358762.c | 280 ++++++++++++++++++++++++++++++
> 3 files changed, 289 insertions(+)
> create mode 100644 drivers/gpu/drm/bridge/tc358762.c
>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 43271c21d3fc..58e879852082 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -153,6 +153,14 @@ config DRM_THINE_THC63LVD1024
> help
> Thine THC63LVD1024 LVDS/parallel converter driver.
>
> +config DRM_TOSHIBA_TC358762
> + tristate "TC358762 DSI/DPI bridge"
> + depends on OF
> + select DRM_MIPI_DSI
> + select DRM_PANEL_BRIDGE
> + help
> + Toshiba TC358762 DSI/DPI bridge driver.
> +
> config DRM_TOSHIBA_TC358764
> tristate "TC358764 DSI/LVDS bridge"
> depends on OF
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index d63d4b7e4347..b341c60ee96a 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -12,6 +12,7 @@ obj-$(CONFIG_DRM_SII902X) += sii902x.o
> obj-$(CONFIG_DRM_SII9234) += sii9234.o
> obj-$(CONFIG_DRM_SIMPLE_BRIDGE) += simple-bridge.o
> obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o
> +obj-$(CONFIG_DRM_TOSHIBA_TC358762) += tc358762.o
> obj-$(CONFIG_DRM_TOSHIBA_TC358764) += tc358764.o
> obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
> obj-$(CONFIG_DRM_TOSHIBA_TC358768) += tc358768.o
> diff --git a/drivers/gpu/drm/bridge/tc358762.c b/drivers/gpu/drm/bridge/tc358762.c
> new file mode 100644
> index 000000000000..1bfdfc6affaf
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/tc358762.c
> @@ -0,0 +1,280 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 Marek Vasut <marex@denx.de>
> + *
> + * Based on tc358764.c by
> + * Andrzej Hajda <a.hajda@samsung.com>
> + * Maciej Purski <m.purski@samsung.com>
> + *
> + * Based on rpi_touchscreen.c by
> + * Eric Anholt <eric@anholt.net>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +#include <linux/of_graph.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_fb_helper.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_print.h>
> +#include <drm/drm_probe_helper.h>
> +
> +/* PPI layer registers */
> +#define PPI_STARTPPI 0x0104 /* START control bit */
> +#define PPI_LPTXTIMECNT 0x0114 /* LPTX timing signal */
> +#define PPI_D0S_ATMR 0x0144
> +#define PPI_D1S_ATMR 0x0148
> +#define PPI_D0S_CLRSIPOCOUNT 0x0164 /* Assertion timer for Lane 0 */
> +#define PPI_D1S_CLRSIPOCOUNT 0x0168 /* Assertion timer for Lane 1 */
> +#define PPI_START_FUNCTION 1
> +
> +/* DSI layer registers */
> +#define DSI_STARTDSI 0x0204 /* START control bit of DSI-TX */
> +#define DSI_LANEENABLE 0x0210 /* Enables each lane */
> +#define DSI_RX_START 1
> +
> +/* LCDC/DPI Host Registers */
> +#define LCDCTRL 0x0420
> +
> +/* SPI Master Registers */
> +#define SPICMR 0x0450
> +#define SPITCR 0x0454
> +
> +/* System Controller Registers */
> +#define SYSCTRL 0x0464
> +
> +/* System registers */
> +#define LPX_PERIOD 3
> +
> +/* Lane enable PPI and DSI register bits */
> +#define LANEENABLE_CLEN BIT(0)
> +#define LANEENABLE_L0EN BIT(1)
> +#define LANEENABLE_L1EN BIT(2)
> +
> +struct tc358762 {
> + struct device *dev;
> + struct drm_bridge bridge;
> + struct drm_connector connector;
> + struct regulator *regulator;
> + struct drm_bridge *panel_bridge;
> + bool pre_enabled;
> + int error;
> +};
> +
> +static int tc358762_clear_error(struct tc358762 *ctx)
> +{
> + int ret = ctx->error;
> +
> + ctx->error = 0;
> + return ret;
> +}
> +
> +static void tc358762_write(struct tc358762 *ctx, u16 addr, u32 val)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + ssize_t ret;
> + u8 data[6];
> +
> + if (ctx->error)
> + return;
> +
> + data[0] = addr;
> + data[1] = addr >> 8;
> + data[2] = val;
> + data[3] = val >> 8;
> + data[4] = val >> 16;
> + data[5] = val >> 24;
> +
> + ret = mipi_dsi_generic_write(dsi, data, sizeof(data));
> + if (ret < 0)
> + ctx->error = ret;
> +}
> +
> +static inline struct tc358762 *bridge_to_tc358762(struct drm_bridge *bridge)
> +{
> + return container_of(bridge, struct tc358762, bridge);
> +}
> +
> +static int tc358762_init(struct tc358762 *ctx)
> +{
> + tc358762_write(ctx, DSI_LANEENABLE,
> + LANEENABLE_L0EN | LANEENABLE_CLEN);
> + tc358762_write(ctx, PPI_D0S_CLRSIPOCOUNT, 5);
> + tc358762_write(ctx, PPI_D1S_CLRSIPOCOUNT, 5);
> + tc358762_write(ctx, PPI_D0S_ATMR, 0);
> + tc358762_write(ctx, PPI_D1S_ATMR, 0);
> + tc358762_write(ctx, PPI_LPTXTIMECNT, LPX_PERIOD);
> +
> + tc358762_write(ctx, SPICMR, 0x00);
> + tc358762_write(ctx, LCDCTRL, 0x00100150);
> + tc358762_write(ctx, SYSCTRL, 0x040f);
> + msleep(100);
> +
> + tc358762_write(ctx, PPI_STARTPPI, PPI_START_FUNCTION);
> + tc358762_write(ctx, DSI_STARTDSI, DSI_RX_START);
> +
> + msleep(100);
> +
> + return tc358762_clear_error(ctx);
> +}
> +
> +static void tc358762_post_disable(struct drm_bridge *bridge)
> +{
> + struct tc358762 *ctx = bridge_to_tc358762(bridge);
> + int ret;
> +
> + /*
> + * The post_disable hook might be called multiple times.
> + * We want to avoid regulator imbalance below.
> + */
> + if (!ctx->pre_enabled)
> + return;
> +
> + ctx->pre_enabled = false;
> +
> + ret = regulator_disable(ctx->regulator);
> + if (ret < 0)
> + dev_err(ctx->dev, "error disabling regulators (%d)\n", ret);
> +}
> +
> +static void tc358762_pre_enable(struct drm_bridge *bridge)
> +{
> + struct tc358762 *ctx = bridge_to_tc358762(bridge);
> + int ret;
> +
> + ret = regulator_enable(ctx->regulator);
> + if (ret < 0)
> + dev_err(ctx->dev, "error enabling regulators (%d)\n", ret);
> +
> + ret = tc358762_init(ctx);
> + if (ret < 0)
> + dev_err(ctx->dev, "error initializing bridge (%d)\n", ret);
> +
> + ctx->pre_enabled = true;
> +}
> +
> +static int tc358762_attach(struct drm_bridge *bridge,
> + enum drm_bridge_attach_flags flags)
> +{
> + struct tc358762 *ctx = bridge_to_tc358762(bridge);
> +
> + return drm_bridge_attach(bridge->encoder, ctx->panel_bridge,
> + bridge, flags);
> +}
> +
> +static const struct drm_bridge_funcs tc358762_bridge_funcs = {
> + .post_disable = tc358762_post_disable,
> + .pre_enable = tc358762_pre_enable,
> + .attach = tc358762_attach,
> +};
> +
> +static int tc358762_parse_dt(struct tc358762 *ctx)
> +{
> + struct drm_bridge *panel_bridge;
> + struct device *dev = ctx->dev;
> + struct drm_panel *panel;
> + int ret;
> +
> + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
> + if (ret)
> + return ret;
> +
> + panel_bridge = devm_drm_panel_bridge_add(dev, panel);
> +
> + if (IS_ERR(panel_bridge))
> + return PTR_ERR(panel_bridge);
> +
> + ctx->panel_bridge = panel_bridge;
> +
> + return 0;
> +}
> +
> +static int tc358762_configure_regulators(struct tc358762 *ctx)
> +{
> + ctx->regulator = devm_regulator_get(ctx->dev, "vddc");
> + if (IS_ERR(ctx->regulator))
> + return PTR_ERR(ctx->regulator);
> +
> + return 0;
> +}
> +
> +static int tc358762_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct tc358762 *ctx;
> + int ret;
> +
> + ctx = devm_kzalloc(dev, sizeof(struct tc358762), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> +
> + mipi_dsi_set_drvdata(dsi, ctx);
> +
> + ctx->dev = dev;
> + ctx->pre_enabled = false;
> +
> + /* TODO: Find out how to get dual-lane mode working */
> + dsi->lanes = 1;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
> + MIPI_DSI_MODE_LPM;
> +
> + ret = tc358762_parse_dt(ctx);
> + if (ret < 0)
> + return ret;
> +
> + ret = tc358762_configure_regulators(ctx);
> + if (ret < 0)
> + return ret;
> +
> + ctx->bridge.funcs = &tc358762_bridge_funcs;
> + ctx->bridge.type = DRM_MODE_CONNECTOR_DPI;
> + ctx->bridge.of_node = dev->of_node;
> +
> + drm_bridge_add(&ctx->bridge);
> +
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0) {
> + drm_bridge_remove(&ctx->bridge);
> + dev_err(dev, "failed to attach dsi\n");
> + }
> +
> + return ret;
> +}
> +
> +static int tc358762_remove(struct mipi_dsi_device *dsi)
> +{
> + struct tc358762 *ctx = mipi_dsi_get_drvdata(dsi);
> +
> + mipi_dsi_detach(dsi);
> + drm_bridge_remove(&ctx->bridge);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id tc358762_of_match[] = {
> + { .compatible = "toshiba,tc358762" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, tc358762_of_match);
> +
> +static struct mipi_dsi_driver tc358762_driver = {
> + .probe = tc358762_probe,
> + .remove = tc358762_remove,
> + .driver = {
> + .name = "tc358762",
> + .of_match_table = tc358762_of_match,
> + },
> +};
> +module_mipi_dsi_driver(tc358762_driver);
> +
> +MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
> +MODULE_DESCRIPTION("MIPI-DSI based Driver for TC358762 DSI/DPI Bridge");
> +MODULE_LICENSE("GPL v2");
> --
> 2.28.0
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH V3 2/2] drm/bridge: tc358762: Add basic driver for Toshiba TC358762 DSI-to-DPI bridge
@ 2020-08-12 20:08 ` Sam Ravnborg
0 siblings, 0 replies; 14+ messages in thread
From: Sam Ravnborg @ 2020-08-12 20:08 UTC (permalink / raw)
To: Marek Vasut; +Cc: Rob Herring, dri-devel, devicetree
Hi Marek.
On Sun, Aug 09, 2020 at 12:57:05PM +0200, Marek Vasut wrote:
> Add very basic driver for Toshiba TC358762 DSI-to-DPI bridge, derived
> from tc358764 driver and panel-raspberrypi-touchscreen. This driver is
> meant to replace the panel-raspberrypi-touchscreen too, as the bridge
> connection can be described in DT too.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> To: dri-devel@lists.freedesktop.org
> Cc: Eric Anholt <eric@anholt.net>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: devicetree@vger.kernel.org
> Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
> ---
> V2: Switch to DRM_PANEL_BRIDGE
> V3: No change
Applied to drm-misc-next.
Sam
> ---
> drivers/gpu/drm/bridge/Kconfig | 8 +
> drivers/gpu/drm/bridge/Makefile | 1 +
> drivers/gpu/drm/bridge/tc358762.c | 280 ++++++++++++++++++++++++++++++
> 3 files changed, 289 insertions(+)
> create mode 100644 drivers/gpu/drm/bridge/tc358762.c
>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 43271c21d3fc..58e879852082 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -153,6 +153,14 @@ config DRM_THINE_THC63LVD1024
> help
> Thine THC63LVD1024 LVDS/parallel converter driver.
>
> +config DRM_TOSHIBA_TC358762
> + tristate "TC358762 DSI/DPI bridge"
> + depends on OF
> + select DRM_MIPI_DSI
> + select DRM_PANEL_BRIDGE
> + help
> + Toshiba TC358762 DSI/DPI bridge driver.
> +
> config DRM_TOSHIBA_TC358764
> tristate "TC358764 DSI/LVDS bridge"
> depends on OF
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index d63d4b7e4347..b341c60ee96a 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -12,6 +12,7 @@ obj-$(CONFIG_DRM_SII902X) += sii902x.o
> obj-$(CONFIG_DRM_SII9234) += sii9234.o
> obj-$(CONFIG_DRM_SIMPLE_BRIDGE) += simple-bridge.o
> obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o
> +obj-$(CONFIG_DRM_TOSHIBA_TC358762) += tc358762.o
> obj-$(CONFIG_DRM_TOSHIBA_TC358764) += tc358764.o
> obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
> obj-$(CONFIG_DRM_TOSHIBA_TC358768) += tc358768.o
> diff --git a/drivers/gpu/drm/bridge/tc358762.c b/drivers/gpu/drm/bridge/tc358762.c
> new file mode 100644
> index 000000000000..1bfdfc6affaf
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/tc358762.c
> @@ -0,0 +1,280 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2020 Marek Vasut <marex@denx.de>
> + *
> + * Based on tc358764.c by
> + * Andrzej Hajda <a.hajda@samsung.com>
> + * Maciej Purski <m.purski@samsung.com>
> + *
> + * Based on rpi_touchscreen.c by
> + * Eric Anholt <eric@anholt.net>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/module.h>
> +#include <linux/of_graph.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_crtc.h>
> +#include <drm/drm_fb_helper.h>
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_of.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_print.h>
> +#include <drm/drm_probe_helper.h>
> +
> +/* PPI layer registers */
> +#define PPI_STARTPPI 0x0104 /* START control bit */
> +#define PPI_LPTXTIMECNT 0x0114 /* LPTX timing signal */
> +#define PPI_D0S_ATMR 0x0144
> +#define PPI_D1S_ATMR 0x0148
> +#define PPI_D0S_CLRSIPOCOUNT 0x0164 /* Assertion timer for Lane 0 */
> +#define PPI_D1S_CLRSIPOCOUNT 0x0168 /* Assertion timer for Lane 1 */
> +#define PPI_START_FUNCTION 1
> +
> +/* DSI layer registers */
> +#define DSI_STARTDSI 0x0204 /* START control bit of DSI-TX */
> +#define DSI_LANEENABLE 0x0210 /* Enables each lane */
> +#define DSI_RX_START 1
> +
> +/* LCDC/DPI Host Registers */
> +#define LCDCTRL 0x0420
> +
> +/* SPI Master Registers */
> +#define SPICMR 0x0450
> +#define SPITCR 0x0454
> +
> +/* System Controller Registers */
> +#define SYSCTRL 0x0464
> +
> +/* System registers */
> +#define LPX_PERIOD 3
> +
> +/* Lane enable PPI and DSI register bits */
> +#define LANEENABLE_CLEN BIT(0)
> +#define LANEENABLE_L0EN BIT(1)
> +#define LANEENABLE_L1EN BIT(2)
> +
> +struct tc358762 {
> + struct device *dev;
> + struct drm_bridge bridge;
> + struct drm_connector connector;
> + struct regulator *regulator;
> + struct drm_bridge *panel_bridge;
> + bool pre_enabled;
> + int error;
> +};
> +
> +static int tc358762_clear_error(struct tc358762 *ctx)
> +{
> + int ret = ctx->error;
> +
> + ctx->error = 0;
> + return ret;
> +}
> +
> +static void tc358762_write(struct tc358762 *ctx, u16 addr, u32 val)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
> + ssize_t ret;
> + u8 data[6];
> +
> + if (ctx->error)
> + return;
> +
> + data[0] = addr;
> + data[1] = addr >> 8;
> + data[2] = val;
> + data[3] = val >> 8;
> + data[4] = val >> 16;
> + data[5] = val >> 24;
> +
> + ret = mipi_dsi_generic_write(dsi, data, sizeof(data));
> + if (ret < 0)
> + ctx->error = ret;
> +}
> +
> +static inline struct tc358762 *bridge_to_tc358762(struct drm_bridge *bridge)
> +{
> + return container_of(bridge, struct tc358762, bridge);
> +}
> +
> +static int tc358762_init(struct tc358762 *ctx)
> +{
> + tc358762_write(ctx, DSI_LANEENABLE,
> + LANEENABLE_L0EN | LANEENABLE_CLEN);
> + tc358762_write(ctx, PPI_D0S_CLRSIPOCOUNT, 5);
> + tc358762_write(ctx, PPI_D1S_CLRSIPOCOUNT, 5);
> + tc358762_write(ctx, PPI_D0S_ATMR, 0);
> + tc358762_write(ctx, PPI_D1S_ATMR, 0);
> + tc358762_write(ctx, PPI_LPTXTIMECNT, LPX_PERIOD);
> +
> + tc358762_write(ctx, SPICMR, 0x00);
> + tc358762_write(ctx, LCDCTRL, 0x00100150);
> + tc358762_write(ctx, SYSCTRL, 0x040f);
> + msleep(100);
> +
> + tc358762_write(ctx, PPI_STARTPPI, PPI_START_FUNCTION);
> + tc358762_write(ctx, DSI_STARTDSI, DSI_RX_START);
> +
> + msleep(100);
> +
> + return tc358762_clear_error(ctx);
> +}
> +
> +static void tc358762_post_disable(struct drm_bridge *bridge)
> +{
> + struct tc358762 *ctx = bridge_to_tc358762(bridge);
> + int ret;
> +
> + /*
> + * The post_disable hook might be called multiple times.
> + * We want to avoid regulator imbalance below.
> + */
> + if (!ctx->pre_enabled)
> + return;
> +
> + ctx->pre_enabled = false;
> +
> + ret = regulator_disable(ctx->regulator);
> + if (ret < 0)
> + dev_err(ctx->dev, "error disabling regulators (%d)\n", ret);
> +}
> +
> +static void tc358762_pre_enable(struct drm_bridge *bridge)
> +{
> + struct tc358762 *ctx = bridge_to_tc358762(bridge);
> + int ret;
> +
> + ret = regulator_enable(ctx->regulator);
> + if (ret < 0)
> + dev_err(ctx->dev, "error enabling regulators (%d)\n", ret);
> +
> + ret = tc358762_init(ctx);
> + if (ret < 0)
> + dev_err(ctx->dev, "error initializing bridge (%d)\n", ret);
> +
> + ctx->pre_enabled = true;
> +}
> +
> +static int tc358762_attach(struct drm_bridge *bridge,
> + enum drm_bridge_attach_flags flags)
> +{
> + struct tc358762 *ctx = bridge_to_tc358762(bridge);
> +
> + return drm_bridge_attach(bridge->encoder, ctx->panel_bridge,
> + bridge, flags);
> +}
> +
> +static const struct drm_bridge_funcs tc358762_bridge_funcs = {
> + .post_disable = tc358762_post_disable,
> + .pre_enable = tc358762_pre_enable,
> + .attach = tc358762_attach,
> +};
> +
> +static int tc358762_parse_dt(struct tc358762 *ctx)
> +{
> + struct drm_bridge *panel_bridge;
> + struct device *dev = ctx->dev;
> + struct drm_panel *panel;
> + int ret;
> +
> + ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL);
> + if (ret)
> + return ret;
> +
> + panel_bridge = devm_drm_panel_bridge_add(dev, panel);
> +
> + if (IS_ERR(panel_bridge))
> + return PTR_ERR(panel_bridge);
> +
> + ctx->panel_bridge = panel_bridge;
> +
> + return 0;
> +}
> +
> +static int tc358762_configure_regulators(struct tc358762 *ctx)
> +{
> + ctx->regulator = devm_regulator_get(ctx->dev, "vddc");
> + if (IS_ERR(ctx->regulator))
> + return PTR_ERR(ctx->regulator);
> +
> + return 0;
> +}
> +
> +static int tc358762_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct tc358762 *ctx;
> + int ret;
> +
> + ctx = devm_kzalloc(dev, sizeof(struct tc358762), GFP_KERNEL);
> + if (!ctx)
> + return -ENOMEM;
> +
> + mipi_dsi_set_drvdata(dsi, ctx);
> +
> + ctx->dev = dev;
> + ctx->pre_enabled = false;
> +
> + /* TODO: Find out how to get dual-lane mode working */
> + dsi->lanes = 1;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE |
> + MIPI_DSI_MODE_LPM;
> +
> + ret = tc358762_parse_dt(ctx);
> + if (ret < 0)
> + return ret;
> +
> + ret = tc358762_configure_regulators(ctx);
> + if (ret < 0)
> + return ret;
> +
> + ctx->bridge.funcs = &tc358762_bridge_funcs;
> + ctx->bridge.type = DRM_MODE_CONNECTOR_DPI;
> + ctx->bridge.of_node = dev->of_node;
> +
> + drm_bridge_add(&ctx->bridge);
> +
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0) {
> + drm_bridge_remove(&ctx->bridge);
> + dev_err(dev, "failed to attach dsi\n");
> + }
> +
> + return ret;
> +}
> +
> +static int tc358762_remove(struct mipi_dsi_device *dsi)
> +{
> + struct tc358762 *ctx = mipi_dsi_get_drvdata(dsi);
> +
> + mipi_dsi_detach(dsi);
> + drm_bridge_remove(&ctx->bridge);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id tc358762_of_match[] = {
> + { .compatible = "toshiba,tc358762" },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, tc358762_of_match);
> +
> +static struct mipi_dsi_driver tc358762_driver = {
> + .probe = tc358762_probe,
> + .remove = tc358762_remove,
> + .driver = {
> + .name = "tc358762",
> + .of_match_table = tc358762_of_match,
> + },
> +};
> +module_mipi_dsi_driver(tc358762_driver);
> +
> +MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
> +MODULE_DESCRIPTION("MIPI-DSI based Driver for TC358762 DSI/DPI Bridge");
> +MODULE_LICENSE("GPL v2");
> --
> 2.28.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH V3 1/2] dt-bindings: Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge
2020-08-12 20:07 ` Sam Ravnborg
@ 2020-12-03 18:01 ` Dave Stevenson
-1 siblings, 0 replies; 14+ messages in thread
From: Dave Stevenson @ 2020-12-03 18:01 UTC (permalink / raw)
To: Marek Vasut; +Cc: Rob Herring, DRI Development, devicetree, Sam Ravnborg
Hi Marek
On Wed, 12 Aug 2020 at 21:07, Sam Ravnborg <sam@ravnborg.org> wrote:
>
> Hi Marek.
>
> On Sun, Aug 09, 2020 at 12:57:04PM +0200, Marek Vasut wrote:
> > Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge, this
> > one is used in the Raspberry Pi 7" touchscreen display unit.
> >
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > To: dri-devel@lists.freedesktop.org
> > Cc: Eric Anholt <eric@anholt.net>
> > Cc: Rob Herring <robh+dt@kernel.org>
> > Cc: Sam Ravnborg <sam@ravnborg.org>
> > Cc: devicetree@vger.kernel.org
> > ---
> > V2: Fix dt_binding_check errors
> > V3: Add ... at the end of example
>
> With Rob's r-b it is now applied to drm-misc-next.
>
> Sam
>
> > ---
> > .../display/bridge/toshiba,tc358762.yaml | 127 ++++++++++++++++++
> > 1 file changed, 127 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
> > new file mode 100644
> > index 000000000000..195025e6803c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
> > @@ -0,0 +1,127 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358762.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Toshiba TC358762 MIPI DSI to MIPI DPI bridge
> > +
> > +maintainers:
> > + - Marek Vasut <marex@denx.de>
> > +
> > +description: |
> > + The TC358762 is bridge device which converts MIPI DSI to MIPI DPI.
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - toshiba,tc358762
> > +
> > + reg:
> > + maxItems: 1
> > + description: virtual channel number of a DSI peripheral
> > +
> > + vddc-supply:
> > + description: Regulator for 1.2V internal core power.
> > +
> > + ports:
> > + type: object
> > +
> > + properties:
> > + "#address-cells":
> > + const: 1
> > +
> > + "#size-cells":
> > + const: 0
> > +
> > + port@0:
> > + type: object
> > + additionalProperties: false
> > +
> > + description: |
> > + Video port for MIPI DSI input
> > +
> > + properties:
> > + reg:
> > + const: 0
> > +
> > + patternProperties:
> > + endpoint:
> > + type: object
> > + additionalProperties: false
> > +
> > + properties:
> > + remote-endpoint: true
> > +
> > + required:
> > + - reg
> > +
> > + port@1:
> > + type: object
> > + additionalProperties: false
> > +
> > + description: |
> > + Video port for MIPI DPI output (panel or connector).
> > +
> > + properties:
> > + reg:
> > + const: 1
> > +
> > + patternProperties:
> > + endpoint:
> > + type: object
> > + additionalProperties: false
> > +
> > + properties:
> > + remote-endpoint: true
> > +
> > + required:
> > + - reg
> > +
> > + required:
> > + - "#address-cells"
> > + - "#size-cells"
> > + - port@0
> > + - port@1
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - vddc-supply
> > + - ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + i2c1 {
Minor point.
I've just come to use this and noticed that this example puts the
device under i2c1. Seeing as it's a DSI driver with no I2C
interaction, shouldn't it be under a dsi node?
Thanks
Dave
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + bridge@0 {
> > + reg = <0>;
> > + compatible = "toshiba,tc358762";
> > + vddc-supply = <&vcc_1v2_reg>;
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > + bridge_in: endpoint {
> > + remote-endpoint = <&dsi_out>;
> > + };
> > + };
> > +
> > + port@1 {
> > + reg = <1>;
> > + bridge_out: endpoint {
> > + remote-endpoint = <&panel_in>;
> > + };
> > + };
> > + };
> > + };
> > + };
> > +
> > +...
> > --
> > 2.28.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH V3 1/2] dt-bindings: Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge
@ 2020-12-03 18:01 ` Dave Stevenson
0 siblings, 0 replies; 14+ messages in thread
From: Dave Stevenson @ 2020-12-03 18:01 UTC (permalink / raw)
To: Marek Vasut; +Cc: devicetree, Rob Herring, Sam Ravnborg, DRI Development
Hi Marek
On Wed, 12 Aug 2020 at 21:07, Sam Ravnborg <sam@ravnborg.org> wrote:
>
> Hi Marek.
>
> On Sun, Aug 09, 2020 at 12:57:04PM +0200, Marek Vasut wrote:
> > Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge, this
> > one is used in the Raspberry Pi 7" touchscreen display unit.
> >
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > To: dri-devel@lists.freedesktop.org
> > Cc: Eric Anholt <eric@anholt.net>
> > Cc: Rob Herring <robh+dt@kernel.org>
> > Cc: Sam Ravnborg <sam@ravnborg.org>
> > Cc: devicetree@vger.kernel.org
> > ---
> > V2: Fix dt_binding_check errors
> > V3: Add ... at the end of example
>
> With Rob's r-b it is now applied to drm-misc-next.
>
> Sam
>
> > ---
> > .../display/bridge/toshiba,tc358762.yaml | 127 ++++++++++++++++++
> > 1 file changed, 127 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
> > new file mode 100644
> > index 000000000000..195025e6803c
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
> > @@ -0,0 +1,127 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/bridge/toshiba,tc358762.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Toshiba TC358762 MIPI DSI to MIPI DPI bridge
> > +
> > +maintainers:
> > + - Marek Vasut <marex@denx.de>
> > +
> > +description: |
> > + The TC358762 is bridge device which converts MIPI DSI to MIPI DPI.
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - toshiba,tc358762
> > +
> > + reg:
> > + maxItems: 1
> > + description: virtual channel number of a DSI peripheral
> > +
> > + vddc-supply:
> > + description: Regulator for 1.2V internal core power.
> > +
> > + ports:
> > + type: object
> > +
> > + properties:
> > + "#address-cells":
> > + const: 1
> > +
> > + "#size-cells":
> > + const: 0
> > +
> > + port@0:
> > + type: object
> > + additionalProperties: false
> > +
> > + description: |
> > + Video port for MIPI DSI input
> > +
> > + properties:
> > + reg:
> > + const: 0
> > +
> > + patternProperties:
> > + endpoint:
> > + type: object
> > + additionalProperties: false
> > +
> > + properties:
> > + remote-endpoint: true
> > +
> > + required:
> > + - reg
> > +
> > + port@1:
> > + type: object
> > + additionalProperties: false
> > +
> > + description: |
> > + Video port for MIPI DPI output (panel or connector).
> > +
> > + properties:
> > + reg:
> > + const: 1
> > +
> > + patternProperties:
> > + endpoint:
> > + type: object
> > + additionalProperties: false
> > +
> > + properties:
> > + remote-endpoint: true
> > +
> > + required:
> > + - reg
> > +
> > + required:
> > + - "#address-cells"
> > + - "#size-cells"
> > + - port@0
> > + - port@1
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - vddc-supply
> > + - ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + i2c1 {
Minor point.
I've just come to use this and noticed that this example puts the
device under i2c1. Seeing as it's a DSI driver with no I2C
interaction, shouldn't it be under a dsi node?
Thanks
Dave
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + bridge@0 {
> > + reg = <0>;
> > + compatible = "toshiba,tc358762";
> > + vddc-supply = <&vcc_1v2_reg>;
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port@0 {
> > + reg = <0>;
> > + bridge_in: endpoint {
> > + remote-endpoint = <&dsi_out>;
> > + };
> > + };
> > +
> > + port@1 {
> > + reg = <1>;
> > + bridge_out: endpoint {
> > + remote-endpoint = <&panel_in>;
> > + };
> > + };
> > + };
> > + };
> > + };
> > +
> > +...
> > --
> > 2.28.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH V3 1/2] dt-bindings: Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge
2020-12-03 18:01 ` Dave Stevenson
@ 2020-12-03 18:09 ` Marek Vasut
-1 siblings, 0 replies; 14+ messages in thread
From: Marek Vasut @ 2020-12-03 18:09 UTC (permalink / raw)
To: Dave Stevenson; +Cc: Rob Herring, DRI Development, devicetree, Sam Ravnborg
On 12/3/20 7:01 PM, Dave Stevenson wrote:
> Hi Marek
Hi,
[...]
>>> +additionalProperties: false
>>> +
>>> +examples:
>>> + - |
>>> + i2c1 {
>
> Minor point.
> I've just come to use this and noticed that this example puts the
> device under i2c1. Seeing as it's a DSI driver with no I2C
> interaction, shouldn't it be under a dsi node?
Good catch, it should, please send a patch to correct this error, thanks.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: [PATCH V3 1/2] dt-bindings: Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge
@ 2020-12-03 18:09 ` Marek Vasut
0 siblings, 0 replies; 14+ messages in thread
From: Marek Vasut @ 2020-12-03 18:09 UTC (permalink / raw)
To: Dave Stevenson; +Cc: devicetree, Rob Herring, Sam Ravnborg, DRI Development
On 12/3/20 7:01 PM, Dave Stevenson wrote:
> Hi Marek
Hi,
[...]
>>> +additionalProperties: false
>>> +
>>> +examples:
>>> + - |
>>> + i2c1 {
>
> Minor point.
> I've just come to use this and noticed that this example puts the
> device under i2c1. Seeing as it's a DSI driver with no I2C
> interaction, shouldn't it be under a dsi node?
Good catch, it should, please send a patch to correct this error, thanks.
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2020-12-04 8:35 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-09 10:57 [PATCH V3 1/2] dt-bindings: Add DT bindings for Toshiba TC358762 DSI-to-DPI bridge Marek Vasut
2020-08-09 10:57 ` Marek Vasut
2020-08-09 10:57 ` [PATCH V3 2/2] drm/bridge: tc358762: Add basic driver " Marek Vasut
2020-08-09 10:57 ` Marek Vasut
2020-08-12 20:08 ` Sam Ravnborg
2020-08-12 20:08 ` Sam Ravnborg
2020-08-12 19:48 ` [PATCH V3 1/2] dt-bindings: Add DT bindings " Rob Herring
2020-08-12 19:48 ` Rob Herring
2020-08-12 20:07 ` Sam Ravnborg
2020-08-12 20:07 ` Sam Ravnborg
2020-12-03 18:01 ` Dave Stevenson
2020-12-03 18:01 ` Dave Stevenson
2020-12-03 18:09 ` Marek Vasut
2020-12-03 18:09 ` Marek Vasut
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.