* [PATCH v1 0/5] drm/panel: Use dev_ based logging
@ 2020-08-15 12:54 Sam Ravnborg
2020-08-15 12:54 ` [PATCH v1 1/5] drm/panel: samsung: " Sam Ravnborg
` (6 more replies)
0 siblings, 7 replies; 10+ messages in thread
From: Sam Ravnborg @ 2020-08-15 12:54 UTC (permalink / raw)
To: dri-devel, Thierry Reding
Cc: Laurent Pinchart, David Airlie, Guido Günther, Jerry Han,
Jani Nikula, Jagan Teki, Robert Chiras, Sam Ravnborg,
Icenowy Zheng
The drm/panel drivers uses a mixture of DRM_ and dev_ based logging.
With this patchset all panel drivers are migrated to use dev_ based
logging as the DRM_ based logging did not add any extra info.
Drop the now unused include of drm_print.h.
With this change new panel drivers will be requires to change to dev_
based logging - so some of the in-flight panel drivers will need trivial
updates before they are accepted.
Patch divided in smaller bites to ease review. There is no dependencies
between the patches.
Copied a few people that may have input to the move away from DRM_ based
logging (Daniel (presumeably on vacation), Jani).
Sam
Sam Ravnborg (5):
drm/panel: samsung: Use dev_ based logging
drm/panel: leadtek: Use dev_ based logging
drm/panel: raydium: Use dev_ based logging
drm/panel: sitronix: Use dev_ based logging
drm/panel: Use dev_ based logging
drivers/gpu/drm/panel/panel-boe-himax8279d.c | 44 ++++--------
drivers/gpu/drm/panel/panel-elida-kd35t133.c | 51 +++++---------
drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c | 19 +++--
.../gpu/drm/panel/panel-feiyang-fy07024di26a30d.c | 21 +++---
drivers/gpu/drm/panel/panel-ilitek-ili9322.c | 3 +-
drivers/gpu/drm/panel/panel-innolux-p079zca.c | 31 +++------
drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c | 33 ++++-----
drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c | 58 ++++++----------
drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c | 49 +++++--------
drivers/gpu/drm/panel/panel-novatek-nt35510.c | 40 ++++-------
drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 13 ++--
drivers/gpu/drm/panel/panel-raydium-rm67191.c | 33 ++++-----
drivers/gpu/drm/panel/panel-raydium-rm68200.c | 18 +++--
drivers/gpu/drm/panel/panel-ronbo-rb070d30.c | 16 ++---
drivers/gpu/drm/panel/panel-samsung-ld9040.c | 3 +-
drivers/gpu/drm/panel/panel-samsung-s6d16d0.c | 23 +++---
drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c | 3 +-
drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c | 3 +-
drivers/gpu/drm/panel/panel-samsung-s6e63m0.c | 22 +++---
drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c | 3 +-
drivers/gpu/drm/panel/panel-sitronix-st7701.c | 10 ++-
drivers/gpu/drm/panel/panel-sitronix-st7703.c | 61 ++++++----------
drivers/gpu/drm/panel/panel-sony-acx424akp.c | 81 ++++++++--------------
drivers/gpu/drm/panel/panel-tpo-tpg110.c | 38 +++++-----
drivers/gpu/drm/panel/panel-truly-nt35597.c | 63 ++++++-----------
drivers/gpu/drm/panel/panel-visionox-rm69299.c | 41 ++++-------
drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c | 51 +++++---------
27 files changed, 308 insertions(+), 523 deletions(-)
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH v1 1/5] drm/panel: samsung: Use dev_ based logging
2020-08-15 12:54 [PATCH v1 0/5] drm/panel: Use dev_ based logging Sam Ravnborg
@ 2020-08-15 12:54 ` Sam Ravnborg
2020-08-15 19:23 ` Linus Walleij
2020-08-15 12:54 ` [PATCH v1 2/5] drm/panel: leadtek: " Sam Ravnborg
` (5 subsequent siblings)
6 siblings, 1 reply; 10+ messages in thread
From: Sam Ravnborg @ 2020-08-15 12:54 UTC (permalink / raw)
To: dri-devel, Thierry Reding
Cc: Laurent Pinchart, David Airlie, Guido Günther, Jerry Han,
Jani Nikula, Jagan Teki, Robert Chiras, Sam Ravnborg,
Icenowy Zheng
Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
drivers/gpu/drm/panel/panel-samsung-ld9040.c | 3 +--
drivers/gpu/drm/panel/panel-samsung-s6d16d0.c | 23 +++++++------------
drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c | 3 +--
.../gpu/drm/panel/panel-samsung-s6e63j0x03.c | 3 +--
drivers/gpu/drm/panel/panel-samsung-s6e63m0.c | 22 ++++++++----------
drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c | 3 +--
6 files changed, 21 insertions(+), 36 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-samsung-ld9040.c b/drivers/gpu/drm/panel/panel-samsung-ld9040.c
index 358168ed8355..f484147fc3a6 100644
--- a/drivers/gpu/drm/panel/panel-samsung-ld9040.c
+++ b/drivers/gpu/drm/panel/panel-samsung-ld9040.c
@@ -21,7 +21,6 @@
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
/* Manufacturer Command Set */
#define MCS_MANPWR 0xb0
@@ -269,7 +268,7 @@ static int ld9040_get_modes(struct drm_panel *panel,
mode = drm_mode_create(connector->dev);
if (!mode) {
- DRM_ERROR("failed to create a new display mode\n");
+ dev_err(panel->dev, "failed to create a new display mode\n");
return 0;
}
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c b/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c
index e88af6f8bf60..4aac0d1573dd 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6d16d0.c
@@ -7,7 +7,6 @@
#include <drm/drm_modes.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
#include <linux/gpio/consumer.h>
#include <linux/regulator/consumer.h>
@@ -55,8 +54,7 @@ static int s6d16d0_unprepare(struct drm_panel *panel)
/* Enter sleep mode */
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
if (ret) {
- DRM_DEV_ERROR(s6->dev, "failed to enter sleep mode (%d)\n",
- ret);
+ dev_err(s6->dev, "failed to enter sleep mode (%d)\n", ret);
return ret;
}
@@ -75,7 +73,7 @@ static int s6d16d0_prepare(struct drm_panel *panel)
ret = regulator_enable(s6->supply);
if (ret) {
- DRM_DEV_ERROR(s6->dev, "failed to enable supply (%d)\n", ret);
+ dev_err(s6->dev, "failed to enable supply (%d)\n", ret);
return ret;
}
@@ -90,15 +88,13 @@ static int s6d16d0_prepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_tear_on(dsi,
MIPI_DSI_DCS_TEAR_MODE_VBLANK);
if (ret) {
- DRM_DEV_ERROR(s6->dev, "failed to enable vblank TE (%d)\n",
- ret);
+ dev_err(s6->dev, "failed to enable vblank TE (%d)\n", ret);
return ret;
}
/* Exit sleep mode and power on */
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret) {
- DRM_DEV_ERROR(s6->dev, "failed to exit sleep mode (%d)\n",
- ret);
+ dev_err(s6->dev, "failed to exit sleep mode (%d)\n", ret);
return ret;
}
@@ -113,8 +109,7 @@ static int s6d16d0_enable(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_on(dsi);
if (ret) {
- DRM_DEV_ERROR(s6->dev, "failed to turn display on (%d)\n",
- ret);
+ dev_err(s6->dev, "failed to turn display on (%d)\n", ret);
return ret;
}
@@ -129,8 +124,7 @@ static int s6d16d0_disable(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret) {
- DRM_DEV_ERROR(s6->dev, "failed to turn display off (%d)\n",
- ret);
+ dev_err(s6->dev, "failed to turn display off (%d)\n", ret);
return ret;
}
@@ -144,7 +138,7 @@ static int s6d16d0_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev, &samsung_s6d16d0_mode);
if (!mode) {
- DRM_ERROR("bad mode or failed to add mode\n");
+ dev_err(panel->dev, "bad mode or failed to add mode\n");
return -EINVAL;
}
drm_mode_set_name(mode);
@@ -204,8 +198,7 @@ static int s6d16d0_probe(struct mipi_dsi_device *dsi)
if (IS_ERR(s6->reset_gpio)) {
ret = PTR_ERR(s6->reset_gpio);
if (ret != -EPROBE_DEFER)
- DRM_DEV_ERROR(dev, "failed to request GPIO (%d)\n",
- ret);
+ dev_err(dev, "failed to request GPIO (%d)\n", ret);
return ret;
}
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c b/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
index 2c84036c6a65..1d1c79a18613 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c
@@ -18,7 +18,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
#define S6E3HA2_MIN_BRIGHTNESS 0
#define S6E3HA2_MAX_BRIGHTNESS 100
@@ -651,7 +650,7 @@ static int s6e3ha2_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev, ctx->desc->mode);
if (!mode) {
- DRM_ERROR("failed to add mode %ux%ux@%u\n",
+ dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
drm_mode_vrefresh(ctx->desc->mode));
return -ENOMEM;
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c b/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c
index 7a43eb3545cf..b962c817fb30 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c
@@ -19,7 +19,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
#define MCS_LEVEL2_KEY 0xf0
#define MCS_MTP_KEY 0xf1
@@ -406,7 +405,7 @@ static int s6e63j0x03_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev, &default_mode);
if (!mode) {
- DRM_ERROR("failed to add mode %ux%ux@%u\n",
+ dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
default_mode.hdisplay, default_mode.vdisplay,
drm_mode_vrefresh(&default_mode));
return -ENOMEM;
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c b/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c
index e086efea2950..2cc772fdc456 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c
@@ -10,7 +10,6 @@
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
#include <linux/backlight.h>
#include <linux/delay.h>
@@ -157,7 +156,7 @@ static void s6e63m0_dcs_write(struct s6e63m0 *ctx, const u8 *data, size_t len)
if (ctx->error < 0 || len == 0)
return;
- DRM_DEV_DEBUG(ctx->dev, "writing dcs seq: %*ph\n", (int)len, data);
+ dev_dbg(ctx->dev, "writing dcs seq: %*ph\n", (int)len, data);
ret = s6e63m0_spi_write_word(ctx, *data);
while (!ret && --len) {
@@ -166,8 +165,7 @@ static void s6e63m0_dcs_write(struct s6e63m0 *ctx, const u8 *data, size_t len)
}
if (ret) {
- DRM_DEV_ERROR(ctx->dev, "error %d writing dcs seq: %*ph\n", ret,
- (int)len, data);
+ dev_err(ctx->dev, "error %d writing dcs seq: %*ph\n", ret, (int)len, data);
ctx->error = ret;
}
@@ -368,9 +366,9 @@ static int s6e63m0_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev, &default_mode);
if (!mode) {
- DRM_ERROR("failed to add mode %ux%ux@%u\n",
- default_mode.hdisplay, default_mode.vdisplay,
- drm_mode_vrefresh(&default_mode));
+ dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
+ default_mode.hdisplay, default_mode.vdisplay,
+ drm_mode_vrefresh(&default_mode));
return -ENOMEM;
}
@@ -425,8 +423,7 @@ static int s6e63m0_backlight_register(struct s6e63m0 *ctx)
&props);
if (IS_ERR(ctx->bl_dev)) {
ret = PTR_ERR(ctx->bl_dev);
- DRM_DEV_ERROR(dev, "error registering backlight device (%d)\n",
- ret);
+ dev_err(dev, "error registering backlight device (%d)\n", ret);
}
return ret;
@@ -453,14 +450,13 @@ static int s6e63m0_probe(struct spi_device *spi)
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
ctx->supplies);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "failed to get regulators: %d\n", ret);
+ dev_err(dev, "failed to get regulators: %d\n", ret);
return ret;
}
ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(ctx->reset_gpio)) {
- DRM_DEV_ERROR(dev, "cannot get reset-gpios %ld\n",
- PTR_ERR(ctx->reset_gpio));
+ dev_err(dev, "cannot get reset-gpios %ld\n", PTR_ERR(ctx->reset_gpio));
return PTR_ERR(ctx->reset_gpio);
}
@@ -468,7 +464,7 @@ static int s6e63m0_probe(struct spi_device *spi)
spi->mode = SPI_MODE_3;
ret = spi_setup(spi);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "spi setup failed.\n");
+ dev_err(dev, "spi setup failed.\n");
return ret;
}
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c b/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c
index e36cb1a25318..527371120266 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c
@@ -25,7 +25,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
#define LDI_MTP_LENGTH 24
#define GAMMA_LEVEL_NUM 25
@@ -928,7 +927,7 @@ static int s6e8aa0_get_modes(struct drm_panel *panel,
mode = drm_mode_create(connector->dev);
if (!mode) {
- DRM_ERROR("failed to create a new display mode\n");
+ dev_err(panel->dev, "failed to create a new display mode\n");
return 0;
}
--
2.25.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v1 2/5] drm/panel: leadtek: Use dev_ based logging
2020-08-15 12:54 [PATCH v1 0/5] drm/panel: Use dev_ based logging Sam Ravnborg
2020-08-15 12:54 ` [PATCH v1 1/5] drm/panel: samsung: " Sam Ravnborg
@ 2020-08-15 12:54 ` Sam Ravnborg
2020-08-15 12:54 ` [PATCH v1 3/5] drm/panel: raydium: " Sam Ravnborg
` (4 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Sam Ravnborg @ 2020-08-15 12:54 UTC (permalink / raw)
To: dri-devel, Thierry Reding
Cc: Laurent Pinchart, David Airlie, Guido Günther, Jerry Han,
Jani Nikula, Jagan Teki, Robert Chiras, Sam Ravnborg,
Icenowy Zheng
Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
.../drm/panel/panel-leadtek-ltk050h3146w.c | 58 +++++++------------
.../drm/panel/panel-leadtek-ltk500hd1829.c | 49 ++++++----------
2 files changed, 37 insertions(+), 70 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
index eaa9da3ebbea..ed0d5f959037 100644
--- a/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
+++ b/drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c
@@ -17,7 +17,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
struct ltk050h3146w_cmd {
char cmd;
@@ -314,8 +313,7 @@ static int ltk050h3146w_init_sequence(struct ltk050h3146w *ctx)
ret = mipi_dsi_dcs_set_tear_on(dsi, 1);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev, "failed to set tear on: %d\n",
- ret);
+ dev_err(ctx->dev, "failed to set tear on: %d\n", ret);
return ret;
}
@@ -360,8 +358,7 @@ static int ltk050h3146w_a2_write_page(struct ltk050h3146w *ctx, int page,
ret = ltk050h3146w_a2_select_page(ctx, page);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev, "failed to select page %d: %d\n",
- page, ret);
+ dev_err(ctx->dev, "failed to select page %d: %d\n", page, ret);
return ret;
}
@@ -369,9 +366,7 @@ static int ltk050h3146w_a2_write_page(struct ltk050h3146w *ctx, int page,
ret = mipi_dsi_generic_write(dsi, &cmds[i],
sizeof(struct ltk050h3146w_cmd));
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev,
- "failed to write page %d init cmds: %d\n",
- page, ret);
+ dev_err(ctx->dev, "failed to write page %d init cmds: %d\n", page, ret);
return ret;
}
}
@@ -405,15 +400,14 @@ static int ltk050h3146w_a2_init_sequence(struct ltk050h3146w *ctx)
ret = ltk050h3146w_a2_select_page(ctx, 0);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev, "failed to select page 0: %d\n", ret);
+ dev_err(ctx->dev, "failed to select page 0: %d\n", ret);
return ret;
}
/* vendor code called this without param, where there should be one */
ret = mipi_dsi_dcs_set_tear_on(dsi, 0);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev, "failed to set tear on: %d\n",
- ret);
+ dev_err(ctx->dev, "failed to set tear on: %d\n", ret);
return ret;
}
@@ -452,15 +446,13 @@ static int ltk050h3146w_unprepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev, "failed to set display off: %d\n",
- ret);
+ dev_err(ctx->dev, "failed to set display off: %d\n", ret);
return ret;
}
mipi_dsi_dcs_enter_sleep_mode(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev, "failed to enter sleep mode: %d\n",
- ret);
+ dev_err(ctx->dev, "failed to enter sleep mode: %d\n", ret);
return ret;
}
@@ -481,17 +473,15 @@ static int ltk050h3146w_prepare(struct drm_panel *panel)
if (ctx->prepared)
return 0;
- DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
+ dev_dbg(ctx->dev, "Resetting the panel\n");
ret = regulator_enable(ctx->vci);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev,
- "Failed to enable vci supply: %d\n", ret);
+ dev_err(ctx->dev, "Failed to enable vci supply: %d\n", ret);
return ret;
}
ret = regulator_enable(ctx->iovcc);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev,
- "Failed to enable iovcc supply: %d\n", ret);
+ dev_err(ctx->dev, "Failed to enable iovcc supply: %d\n", ret);
goto disable_vci;
}
@@ -502,14 +492,13 @@ static int ltk050h3146w_prepare(struct drm_panel *panel)
ret = ctx->panel_desc->init(ctx);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
- ret);
+ dev_err(ctx->dev, "Panel init sequence failed: %d\n", ret);
goto disable_iovcc;
}
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
+ dev_err(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
goto disable_iovcc;
}
@@ -518,7 +507,7 @@ static int ltk050h3146w_prepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_on(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev, "Failed to set display on: %d\n", ret);
+ dev_err(ctx->dev, "Failed to set display on: %d\n", ret);
goto disable_iovcc;
}
@@ -577,7 +566,7 @@ static int ltk050h3146w_probe(struct mipi_dsi_device *dsi)
ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset_gpio)) {
- DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
+ dev_err(dev, "cannot get reset gpio\n");
return PTR_ERR(ctx->reset_gpio);
}
@@ -585,9 +574,7 @@ static int ltk050h3146w_probe(struct mipi_dsi_device *dsi)
if (IS_ERR(ctx->vci)) {
ret = PTR_ERR(ctx->vci);
if (ret != -EPROBE_DEFER)
- DRM_DEV_ERROR(dev,
- "Failed to request vci regulator: %d\n",
- ret);
+ dev_err(dev, "Failed to request vci regulator: %d\n", ret);
return ret;
}
@@ -595,9 +582,7 @@ static int ltk050h3146w_probe(struct mipi_dsi_device *dsi)
if (IS_ERR(ctx->iovcc)) {
ret = PTR_ERR(ctx->iovcc);
if (ret != -EPROBE_DEFER)
- DRM_DEV_ERROR(dev,
- "Failed to request iovcc regulator: %d\n",
- ret);
+ dev_err(dev, "Failed to request iovcc regulator: %d\n", ret);
return ret;
}
@@ -621,7 +606,7 @@ static int ltk050h3146w_probe(struct mipi_dsi_device *dsi)
ret = mipi_dsi_attach(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "mipi_dsi_attach failed: %d\n", ret);
+ dev_err(dev, "mipi_dsi_attach failed: %d\n", ret);
drm_panel_remove(&ctx->panel);
return ret;
}
@@ -636,13 +621,11 @@ static void ltk050h3146w_shutdown(struct mipi_dsi_device *dsi)
ret = drm_panel_unprepare(&ctx->panel);
if (ret < 0)
- DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
- ret);
+ dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret);
ret = drm_panel_disable(&ctx->panel);
if (ret < 0)
- DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
- ret);
+ dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret);
}
static int ltk050h3146w_remove(struct mipi_dsi_device *dsi)
@@ -654,8 +637,7 @@ static int ltk050h3146w_remove(struct mipi_dsi_device *dsi)
ret = mipi_dsi_detach(dsi);
if (ret < 0)
- DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
- ret);
+ dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
drm_panel_remove(&ctx->panel);
diff --git a/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c b/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c
index 0f6a248c47a5..3c00e4f8f803 100644
--- a/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c
+++ b/drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c
@@ -20,7 +20,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
struct ltk500hd1829 {
struct device *dev;
@@ -278,13 +277,11 @@ static int ltk500hd1829_unprepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret < 0)
- DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n",
- ret);
+ dev_err(panel->dev, "failed to set display off: %d\n", ret);
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(panel->dev, "failed to enter sleep mode: %d\n",
- ret);
+ dev_err(panel->dev, "failed to enter sleep mode: %d\n", ret);
}
/* 120ms to enter sleep mode */
@@ -310,14 +307,12 @@ static int ltk500hd1829_prepare(struct drm_panel *panel)
ret = regulator_enable(ctx->vcc);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev,
- "Failed to enable vci supply: %d\n", ret);
+ dev_err(ctx->dev, "Failed to enable vci supply: %d\n", ret);
return ret;
}
ret = regulator_enable(ctx->iovcc);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev,
- "Failed to enable iovcc supply: %d\n", ret);
+ dev_err(ctx->dev, "Failed to enable iovcc supply: %d\n", ret);
goto disable_vcc;
}
@@ -333,16 +328,14 @@ static int ltk500hd1829_prepare(struct drm_panel *panel)
ret = mipi_dsi_generic_write(dsi, &init_code[i],
sizeof(struct ltk500hd1829_cmd));
if (ret < 0) {
- DRM_DEV_ERROR(panel->dev,
- "failed to write init cmds: %d\n", ret);
+ dev_err(panel->dev, "failed to write init cmds: %d\n", ret);
goto disable_iovcc;
}
}
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(panel->dev, "failed to exit sleep mode: %d\n",
- ret);
+ dev_err(panel->dev, "failed to exit sleep mode: %d\n", ret);
goto disable_iovcc;
}
@@ -351,8 +344,7 @@ static int ltk500hd1829_prepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_on(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(panel->dev, "failed to set display on: %d\n",
- ret);
+ dev_err(panel->dev, "failed to set display on: %d\n", ret);
goto disable_iovcc;
}
@@ -389,9 +381,9 @@ static int ltk500hd1829_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev, &default_mode);
if (!mode) {
- DRM_DEV_ERROR(ctx->dev, "failed to add mode %ux%ux@%u\n",
- default_mode.hdisplay, default_mode.vdisplay,
- drm_mode_vrefresh(&default_mode));
+ dev_err(ctx->dev, "failed to add mode %ux%u@%u\n",
+ default_mode.hdisplay, default_mode.vdisplay,
+ drm_mode_vrefresh(&default_mode));
return -ENOMEM;
}
@@ -423,7 +415,7 @@ static int ltk500hd1829_probe(struct mipi_dsi_device *dsi)
ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset_gpio)) {
- DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
+ dev_err(dev, "cannot get reset gpio\n");
return PTR_ERR(ctx->reset_gpio);
}
@@ -431,9 +423,7 @@ static int ltk500hd1829_probe(struct mipi_dsi_device *dsi)
if (IS_ERR(ctx->vcc)) {
ret = PTR_ERR(ctx->vcc);
if (ret != -EPROBE_DEFER)
- DRM_DEV_ERROR(dev,
- "Failed to request vcc regulator: %d\n",
- ret);
+ dev_err(dev, "Failed to request vcc regulator: %d\n", ret);
return ret;
}
@@ -441,9 +431,7 @@ static int ltk500hd1829_probe(struct mipi_dsi_device *dsi)
if (IS_ERR(ctx->iovcc)) {
ret = PTR_ERR(ctx->iovcc);
if (ret != -EPROBE_DEFER)
- DRM_DEV_ERROR(dev,
- "Failed to request iovcc regulator: %d\n",
- ret);
+ dev_err(dev, "Failed to request iovcc regulator: %d\n", ret);
return ret;
}
@@ -467,7 +455,7 @@ static int ltk500hd1829_probe(struct mipi_dsi_device *dsi)
ret = mipi_dsi_attach(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "mipi_dsi_attach failed: %d\n", ret);
+ dev_err(dev, "mipi_dsi_attach failed: %d\n", ret);
drm_panel_remove(&ctx->panel);
return ret;
}
@@ -482,13 +470,11 @@ static void ltk500hd1829_shutdown(struct mipi_dsi_device *dsi)
ret = drm_panel_unprepare(&ctx->panel);
if (ret < 0)
- DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
- ret);
+ dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret);
ret = drm_panel_disable(&ctx->panel);
if (ret < 0)
- DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
- ret);
+ dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret);
}
static int ltk500hd1829_remove(struct mipi_dsi_device *dsi)
@@ -500,8 +486,7 @@ static int ltk500hd1829_remove(struct mipi_dsi_device *dsi)
ret = mipi_dsi_detach(dsi);
if (ret < 0)
- DRM_DEV_ERROR(&dsi->dev, "failed to detach from DSI host: %d\n",
- ret);
+ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", ret);
drm_panel_remove(&ctx->panel);
--
2.25.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v1 3/5] drm/panel: raydium: Use dev_ based logging
2020-08-15 12:54 [PATCH v1 0/5] drm/panel: Use dev_ based logging Sam Ravnborg
2020-08-15 12:54 ` [PATCH v1 1/5] drm/panel: samsung: " Sam Ravnborg
2020-08-15 12:54 ` [PATCH v1 2/5] drm/panel: leadtek: " Sam Ravnborg
@ 2020-08-15 12:54 ` Sam Ravnborg
2020-08-15 12:54 ` [PATCH v1 4/5] drm/panel: sitronix: " Sam Ravnborg
` (3 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Sam Ravnborg @ 2020-08-15 12:54 UTC (permalink / raw)
To: dri-devel, Thierry Reding
Cc: Laurent Pinchart, David Airlie, Guido Günther, Jerry Han,
Jani Nikula, Jagan Teki, Robert Chiras, Sam Ravnborg,
Icenowy Zheng
Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Robert Chiras <robert.chiras@nxp.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
drivers/gpu/drm/panel/panel-raydium-rm67191.c | 33 +++++++++----------
drivers/gpu/drm/panel/panel-raydium-rm68200.c | 18 +++++-----
2 files changed, 23 insertions(+), 28 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-raydium-rm67191.c b/drivers/gpu/drm/panel/panel-raydium-rm67191.c
index 2ef322582133..23b62081e951 100644
--- a/drivers/gpu/drm/panel/panel-raydium-rm67191.c
+++ b/drivers/gpu/drm/panel/panel-raydium-rm67191.c
@@ -19,7 +19,6 @@
#include <drm/drm_crtc.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
/* Panel specific color-format bits */
#define COL_FMT_16BPP 0x55
@@ -329,7 +328,7 @@ static int rad_panel_enable(struct drm_panel *panel)
ret = rad_panel_push_cmd_list(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "Failed to send MCS (%d)\n", ret);
+ dev_err(dev, "Failed to send MCS (%d)\n", ret);
goto fail;
}
@@ -341,7 +340,7 @@ static int rad_panel_enable(struct drm_panel *panel)
/* Software reset */
ret = mipi_dsi_dcs_soft_reset(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "Failed to do Software Reset (%d)\n", ret);
+ dev_err(dev, "Failed to do Software Reset (%d)\n", ret);
goto fail;
}
@@ -350,33 +349,32 @@ static int rad_panel_enable(struct drm_panel *panel)
/* Set DSI mode */
ret = mipi_dsi_generic_write(dsi, (u8[]){ 0xC2, 0x0B }, 2);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "Failed to set DSI mode (%d)\n", ret);
+ dev_err(dev, "Failed to set DSI mode (%d)\n", ret);
goto fail;
}
/* Set tear ON */
ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "Failed to set tear ON (%d)\n", ret);
+ dev_err(dev, "Failed to set tear ON (%d)\n", ret);
goto fail;
}
/* Set tear scanline */
ret = mipi_dsi_dcs_set_tear_scanline(dsi, 0x380);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "Failed to set tear scanline (%d)\n", ret);
+ dev_err(dev, "Failed to set tear scanline (%d)\n", ret);
goto fail;
}
/* Set pixel format */
ret = mipi_dsi_dcs_set_pixel_format(dsi, color_format);
- DRM_DEV_DEBUG_DRIVER(dev, "Interface color format set to 0x%x\n",
- color_format);
+ dev_dbg(dev, "Interface color format set to 0x%x\n", color_format);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "Failed to set pixel format (%d)\n", ret);
+ dev_err(dev, "Failed to set pixel format (%d)\n", ret);
goto fail;
}
/* Exit sleep mode */
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "Failed to exit sleep mode (%d)\n", ret);
+ dev_err(dev, "Failed to exit sleep mode (%d)\n", ret);
goto fail;
}
@@ -384,7 +382,7 @@ static int rad_panel_enable(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_on(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "Failed to set display ON (%d)\n", ret);
+ dev_err(dev, "Failed to set display ON (%d)\n", ret);
goto fail;
}
@@ -418,7 +416,7 @@ static int rad_panel_disable(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "Failed to set display OFF (%d)\n", ret);
+ dev_err(dev, "Failed to set display OFF (%d)\n", ret);
return ret;
}
@@ -426,7 +424,7 @@ static int rad_panel_disable(struct drm_panel *panel)
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "Failed to enter sleep mode (%d)\n", ret);
+ dev_err(dev, "Failed to enter sleep mode (%d)\n", ret);
return ret;
}
@@ -442,9 +440,9 @@ static int rad_panel_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev, &default_mode);
if (!mode) {
- DRM_DEV_ERROR(panel->dev, "failed to add mode %ux%ux@%u\n",
- default_mode.hdisplay, default_mode.vdisplay,
- drm_mode_vrefresh(&default_mode));
+ dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
+ default_mode.hdisplay, default_mode.vdisplay,
+ drm_mode_vrefresh(&default_mode));
return -ENOMEM;
}
@@ -626,8 +624,7 @@ static int rad_panel_remove(struct mipi_dsi_device *dsi)
ret = mipi_dsi_detach(dsi);
if (ret)
- DRM_DEV_ERROR(dev, "Failed to detach from host (%d)\n",
- ret);
+ dev_err(dev, "Failed to detach from host (%d)\n", ret);
drm_panel_remove(&rad->panel);
diff --git a/drivers/gpu/drm/panel/panel-raydium-rm68200.c b/drivers/gpu/drm/panel/panel-raydium-rm68200.c
index 81ae8be62d15..f908eeafb1af 100644
--- a/drivers/gpu/drm/panel/panel-raydium-rm68200.c
+++ b/drivers/gpu/drm/panel/panel-raydium-rm68200.c
@@ -17,7 +17,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
/*** Manufacturer Command Set ***/
#define MCS_CMD_MODE_SW 0xFE /* CMD Mode Switch */
@@ -110,8 +109,7 @@ static void rm68200_dcs_write_buf(struct rm68200 *ctx, const void *data,
err = mipi_dsi_dcs_write_buffer(dsi, data, len);
if (err < 0)
- DRM_ERROR_RATELIMITED("MIPI DSI DCS write buffer failed: %d\n",
- err);
+ dev_err_ratelimited(ctx->dev, "MIPI DSI DCS write buffer failed: %d\n", err);
}
static void rm68200_dcs_write_cmd(struct rm68200 *ctx, u8 cmd, u8 value)
@@ -121,7 +119,7 @@ static void rm68200_dcs_write_cmd(struct rm68200 *ctx, u8 cmd, u8 value)
err = mipi_dsi_dcs_write(dsi, cmd, &value, 1);
if (err < 0)
- DRM_ERROR_RATELIMITED("MIPI DSI DCS write failed: %d\n", err);
+ dev_err_ratelimited(ctx->dev, "MIPI DSI DCS write failed: %d\n", err);
}
#define dcs_write_seq(ctx, seq...) \
@@ -256,11 +254,11 @@ static int rm68200_unprepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret)
- DRM_WARN("failed to set display off: %d\n", ret);
+ dev_warn(panel->dev, "failed to set display off: %d\n", ret);
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
if (ret)
- DRM_WARN("failed to enter sleep mode: %d\n", ret);
+ dev_warn(panel->dev, "failed to enter sleep mode: %d\n", ret);
msleep(120);
@@ -287,7 +285,7 @@ static int rm68200_prepare(struct drm_panel *panel)
ret = regulator_enable(ctx->supply);
if (ret < 0) {
- DRM_ERROR("failed to enable supply: %d\n", ret);
+ dev_err(ctx->dev, "failed to enable supply: %d\n", ret);
return ret;
}
@@ -336,9 +334,9 @@ static int rm68200_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev, &default_mode);
if (!mode) {
- DRM_ERROR("failed to add mode %ux%ux@%u\n",
- default_mode.hdisplay, default_mode.vdisplay,
- drm_mode_vrefresh(&default_mode));
+ dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
+ default_mode.hdisplay, default_mode.vdisplay,
+ drm_mode_vrefresh(&default_mode));
return -ENOMEM;
}
--
2.25.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v1 4/5] drm/panel: sitronix: Use dev_ based logging
2020-08-15 12:54 [PATCH v1 0/5] drm/panel: Use dev_ based logging Sam Ravnborg
` (2 preceding siblings ...)
2020-08-15 12:54 ` [PATCH v1 3/5] drm/panel: raydium: " Sam Ravnborg
@ 2020-08-15 12:54 ` Sam Ravnborg
2020-08-15 12:54 ` [PATCH v1 5/5] drm/panel: " Sam Ravnborg
` (2 subsequent siblings)
6 siblings, 0 replies; 10+ messages in thread
From: Sam Ravnborg @ 2020-08-15 12:54 UTC (permalink / raw)
To: dri-devel, Thierry Reding
Cc: Laurent Pinchart, David Airlie, Guido Günther, Jerry Han,
Jani Nikula, Jagan Teki, Robert Chiras, Sam Ravnborg,
Icenowy Zheng
Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
drivers/gpu/drm/panel/panel-sitronix-st7701.c | 10 ++-
drivers/gpu/drm/panel/panel-sitronix-st7703.c | 61 +++++++------------
2 files changed, 27 insertions(+), 44 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7701.c b/drivers/gpu/drm/panel/panel-sitronix-st7701.c
index 12462114a52d..4d2a149b202c 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7701.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7701.c
@@ -7,7 +7,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
#include <linux/gpio/consumer.h>
#include <linux/delay.h>
@@ -269,10 +268,9 @@ static int st7701_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev, desc_mode);
if (!mode) {
- DRM_DEV_ERROR(&st7701->dsi->dev,
- "failed to add mode %ux%ux@%u\n",
- desc_mode->hdisplay, desc_mode->vdisplay,
- drm_mode_vrefresh(desc_mode));
+ dev_err(&st7701->dsi->dev, "failed to add mode %ux%u@%u\n",
+ desc_mode->hdisplay, desc_mode->vdisplay,
+ drm_mode_vrefresh(desc_mode));
return -ENOMEM;
}
@@ -358,7 +356,7 @@ static int st7701_dsi_probe(struct mipi_dsi_device *dsi)
st7701->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(st7701->reset)) {
- DRM_DEV_ERROR(&dsi->dev, "Couldn't get our reset GPIO\n");
+ dev_err(&dsi->dev, "Couldn't get our reset GPIO\n");
return PTR_ERR(st7701->reset);
}
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
index 8996ced2b721..c22e7c49e077 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
@@ -22,7 +22,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
#define DRV_NAME "panel-sitronix-st7703"
@@ -364,8 +363,7 @@ static int st7703_enable(struct drm_panel *panel)
ret = ctx->desc->init_sequence(ctx);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
- ret);
+ dev_err(ctx->dev, "Panel init sequence failed: %d\n", ret);
return ret;
}
@@ -373,7 +371,7 @@ static int st7703_enable(struct drm_panel *panel)
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
+ dev_err(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
return ret;
}
@@ -384,7 +382,7 @@ static int st7703_enable(struct drm_panel *panel)
if (ret)
return ret;
- DRM_DEV_DEBUG_DRIVER(ctx->dev, "Panel init sequence done\n");
+ dev_dbg(ctx->dev, "Panel init sequence done\n");
return 0;
}
@@ -397,13 +395,11 @@ static int st7703_disable(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret < 0)
- DRM_DEV_ERROR(ctx->dev,
- "Failed to turn off the display: %d\n", ret);
+ dev_err(ctx->dev, "Failed to turn off the display: %d\n", ret);
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
if (ret < 0)
- DRM_DEV_ERROR(ctx->dev,
- "Failed to enter sleep mode: %d\n", ret);
+ dev_err(ctx->dev, "Failed to enter sleep mode: %d\n", ret);
return 0;
}
@@ -431,17 +427,15 @@ static int st7703_prepare(struct drm_panel *panel)
if (ctx->prepared)
return 0;
- DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
+ dev_dbg(ctx->dev, "Resetting the panel\n");
ret = regulator_enable(ctx->vcc);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev,
- "Failed to enable vcc supply: %d\n", ret);
+ dev_err(ctx->dev, "Failed to enable vcc supply: %d\n", ret);
return ret;
}
ret = regulator_enable(ctx->iovcc);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev,
- "Failed to enable iovcc supply: %d\n", ret);
+ dev_err(ctx->dev, "Failed to enable iovcc supply: %d\n", ret);
goto disable_vcc;
}
@@ -467,9 +461,9 @@ static int st7703_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev, ctx->desc->mode);
if (!mode) {
- DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n",
- ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
- drm_mode_vrefresh(ctx->desc->mode));
+ dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n",
+ ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
+ drm_mode_vrefresh(ctx->desc->mode));
return -ENOMEM;
}
@@ -496,7 +490,7 @@ static int allpixelson_set(void *data, u64 val)
struct st7703 *ctx = data;
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
- DRM_DEV_DEBUG_DRIVER(ctx->dev, "Setting all pixels on\n");
+ dev_dbg(ctx->dev, "Setting all pixels on\n");
dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON);
msleep(val * 1000);
/* Reset the panel to get video back */
@@ -537,7 +531,7 @@ static int st7703_probe(struct mipi_dsi_device *dsi)
ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset_gpio)) {
- DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
+ dev_err(dev, "cannot get reset gpio\n");
return PTR_ERR(ctx->reset_gpio);
}
@@ -554,18 +548,14 @@ static int st7703_probe(struct mipi_dsi_device *dsi)
if (IS_ERR(ctx->vcc)) {
ret = PTR_ERR(ctx->vcc);
if (ret != -EPROBE_DEFER)
- DRM_DEV_ERROR(dev,
- "Failed to request vcc regulator: %d\n",
- ret);
+ dev_err(dev, "Failed to request vcc regulator: %d\n", ret);
return ret;
}
ctx->iovcc = devm_regulator_get(dev, "iovcc");
if (IS_ERR(ctx->iovcc)) {
ret = PTR_ERR(ctx->iovcc);
if (ret != -EPROBE_DEFER)
- DRM_DEV_ERROR(dev,
- "Failed to request iovcc regulator: %d\n",
- ret);
+ dev_err(dev, "Failed to request iovcc regulator: %d\n", ret);
return ret;
}
@@ -580,17 +570,15 @@ static int st7703_probe(struct mipi_dsi_device *dsi)
ret = mipi_dsi_attach(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(dev,
- "mipi_dsi_attach failed (%d). Is host ready?\n",
- ret);
+ dev_err(dev, "mipi_dsi_attach failed (%d). Is host ready?\n", ret);
drm_panel_remove(&ctx->panel);
return ret;
}
- DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
- ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
- drm_mode_vrefresh(ctx->desc->mode),
- mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
+ dev_info(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
+ ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
+ drm_mode_vrefresh(ctx->desc->mode),
+ mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
st7703_debugfs_init(ctx);
return 0;
@@ -603,13 +591,11 @@ static void st7703_shutdown(struct mipi_dsi_device *dsi)
ret = drm_panel_unprepare(&ctx->panel);
if (ret < 0)
- DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
- ret);
+ dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret);
ret = drm_panel_disable(&ctx->panel);
if (ret < 0)
- DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
- ret);
+ dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret);
}
static int st7703_remove(struct mipi_dsi_device *dsi)
@@ -621,8 +607,7 @@ static int st7703_remove(struct mipi_dsi_device *dsi)
ret = mipi_dsi_detach(dsi);
if (ret < 0)
- DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
- ret);
+ dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
drm_panel_remove(&ctx->panel);
--
2.25.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH v1 5/5] drm/panel: Use dev_ based logging
2020-08-15 12:54 [PATCH v1 0/5] drm/panel: Use dev_ based logging Sam Ravnborg
` (3 preceding siblings ...)
2020-08-15 12:54 ` [PATCH v1 4/5] drm/panel: sitronix: " Sam Ravnborg
@ 2020-08-15 12:54 ` Sam Ravnborg
2020-08-15 21:20 ` [PATCH v1 0/5] " Guido Günther
2020-08-18 20:34 ` Sam Ravnborg
6 siblings, 0 replies; 10+ messages in thread
From: Sam Ravnborg @ 2020-08-15 12:54 UTC (permalink / raw)
To: dri-devel, Thierry Reding
Cc: Laurent Pinchart, David Airlie, Guido Günther, Jerry Han,
Jani Nikula, Jagan Teki, Robert Chiras, Sam Ravnborg,
Icenowy Zheng
Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jerry Han <hanxu5@huaqin.corp-partner.google.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Icenowy Zheng <icenowy@aosc.io>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Guido Günther <agx@sigxcpu.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
---
drivers/gpu/drm/panel/panel-boe-himax8279d.c | 44 ++++------
drivers/gpu/drm/panel/panel-elida-kd35t133.c | 51 +++++-------
.../gpu/drm/panel/panel-feixin-k101-im2ba02.c | 19 ++---
.../drm/panel/panel-feiyang-fy07024di26a30d.c | 21 +++--
drivers/gpu/drm/panel/panel-ilitek-ili9322.c | 3 +-
drivers/gpu/drm/panel/panel-innolux-p079zca.c | 31 +++----
.../drm/panel/panel-kingdisplay-kd097d04.c | 33 +++-----
drivers/gpu/drm/panel/panel-novatek-nt35510.c | 40 ++++-----
.../gpu/drm/panel/panel-orisetech-otm8009a.c | 13 ++-
drivers/gpu/drm/panel/panel-ronbo-rb070d30.c | 16 ++--
drivers/gpu/drm/panel/panel-sony-acx424akp.c | 81 +++++++------------
drivers/gpu/drm/panel/panel-tpo-tpg110.c | 38 ++++-----
drivers/gpu/drm/panel/panel-truly-nt35597.c | 63 +++++----------
.../gpu/drm/panel/panel-visionox-rm69299.c | 41 +++-------
.../gpu/drm/panel/panel-xinpeng-xpp055c272.c | 51 +++++-------
15 files changed, 200 insertions(+), 345 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-boe-himax8279d.c b/drivers/gpu/drm/panel/panel-boe-himax8279d.c
index d676b4c2a8fa..42854bd37fd5 100644
--- a/drivers/gpu/drm/panel/panel-boe-himax8279d.c
+++ b/drivers/gpu/drm/panel/panel-boe-himax8279d.c
@@ -19,7 +19,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
#include <video/mipi_display.h>
@@ -93,8 +92,7 @@ static int boe_panel_disable(struct drm_panel *panel)
err = mipi_dsi_dcs_set_display_off(pinfo->link);
if (err < 0) {
- DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n",
- err);
+ dev_err(panel->dev, "failed to set display off: %d\n", err);
return err;
}
@@ -113,13 +111,11 @@ static int boe_panel_unprepare(struct drm_panel *panel)
err = mipi_dsi_dcs_set_display_off(pinfo->link);
if (err < 0)
- DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n",
- err);
+ dev_err(panel->dev, "failed to set display off: %d\n", err);
err = mipi_dsi_dcs_enter_sleep_mode(pinfo->link);
if (err < 0)
- DRM_DEV_ERROR(panel->dev, "failed to enter sleep mode: %d\n",
- err);
+ dev_err(panel->dev, "failed to enter sleep mode: %d\n", err);
/* sleep_mode_delay: 1ms - 2ms */
usleep_range(1000, 2000);
@@ -163,15 +159,13 @@ static int boe_panel_prepare(struct drm_panel *panel)
/* send init code */
err = send_mipi_cmds(panel, pinfo->desc->on_cmds);
if (err < 0) {
- DRM_DEV_ERROR(panel->dev, "failed to send DCS Init Code: %d\n",
- err);
+ dev_err(panel->dev, "failed to send DCS Init Code: %d\n", err);
goto poweroff;
}
err = mipi_dsi_dcs_exit_sleep_mode(pinfo->link);
if (err < 0) {
- DRM_DEV_ERROR(panel->dev, "failed to exit sleep mode: %d\n",
- err);
+ dev_err(panel->dev, "failed to exit sleep mode: %d\n", err);
goto poweroff;
}
@@ -180,8 +174,7 @@ static int boe_panel_prepare(struct drm_panel *panel)
err = mipi_dsi_dcs_set_display_on(pinfo->link);
if (err < 0) {
- DRM_DEV_ERROR(panel->dev, "failed to set display on: %d\n",
- err);
+ dev_err(panel->dev, "failed to set display on: %d\n", err);
goto poweroff;
}
@@ -209,8 +202,7 @@ static int boe_panel_enable(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_on(pinfo->link);
if (ret < 0) {
- DRM_DEV_ERROR(panel->dev, "failed to set display on: %d\n",
- ret);
+ dev_err(panel->dev, "failed to set display on: %d\n", ret);
return ret;
}
@@ -228,8 +220,8 @@ static int boe_panel_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev, m);
if (!mode) {
- DRM_DEV_ERROR(pinfo->base.dev, "failed to add mode %ux%u@%u\n",
- m->hdisplay, m->vdisplay, drm_mode_vrefresh(m));
+ dev_err(pinfo->base.dev, "failed to add mode %ux%u@%u\n",
+ m->hdisplay, m->vdisplay, drm_mode_vrefresh(m));
return -ENOMEM;
}
@@ -865,8 +857,7 @@ static int panel_add(struct panel_info *pinfo)
if (IS_ERR(pinfo->pp18_gpio)) {
ret = PTR_ERR(pinfo->pp18_gpio);
if (ret != -EPROBE_DEFER)
- DRM_DEV_ERROR(dev, "failed to get pp18 gpio: %d\n",
- ret);
+ dev_err(dev, "failed to get pp18 gpio: %d\n", ret);
return ret;
}
@@ -874,8 +865,7 @@ static int panel_add(struct panel_info *pinfo)
if (IS_ERR(pinfo->pp33_gpio)) {
ret = PTR_ERR(pinfo->pp33_gpio);
if (ret != -EPROBE_DEFER)
- DRM_DEV_ERROR(dev, "failed to get pp33 gpio: %d\n",
- ret);
+ dev_err(dev, "failed to get pp33 gpio: %d\n", ret);
return ret;
}
@@ -883,8 +873,7 @@ static int panel_add(struct panel_info *pinfo)
if (IS_ERR(pinfo->enable_gpio)) {
ret = PTR_ERR(pinfo->enable_gpio);
if (ret != -EPROBE_DEFER)
- DRM_DEV_ERROR(dev, "failed to get enable gpio: %d\n",
- ret);
+ dev_err(dev, "failed to get enable gpio: %d\n", ret);
return ret;
}
@@ -937,18 +926,15 @@ static int panel_remove(struct mipi_dsi_device *dsi)
err = boe_panel_disable(&pinfo->base);
if (err < 0)
- DRM_DEV_ERROR(&dsi->dev, "failed to disable panel: %d\n",
- err);
+ dev_err(&dsi->dev, "failed to disable panel: %d\n", err);
err = boe_panel_unprepare(&pinfo->base);
if (err < 0)
- DRM_DEV_ERROR(&dsi->dev, "failed to unprepare panel: %d\n",
- err);
+ dev_err(&dsi->dev, "failed to unprepare panel: %d\n", err);
err = mipi_dsi_detach(dsi);
if (err < 0)
- DRM_DEV_ERROR(&dsi->dev, "failed to detach from DSI host: %d\n",
- err);
+ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err);
drm_panel_remove(&pinfo->base);
diff --git a/drivers/gpu/drm/panel/panel-elida-kd35t133.c b/drivers/gpu/drm/panel/panel-elida-kd35t133.c
index e9675514d77b..bc36aa3c1123 100644
--- a/drivers/gpu/drm/panel/panel-elida-kd35t133.c
+++ b/drivers/gpu/drm/panel/panel-elida-kd35t133.c
@@ -22,7 +22,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
/* Manufacturer specific Commands send via DSI */
#define KD35T133_CMD_INTERFACEMODECTRL 0xb0
@@ -89,7 +88,7 @@ static int kd35t133_init_sequence(struct kd35t133 *ctx)
0xa9, 0x51, 0x2c, 0x82);
mipi_dsi_dcs_write(dsi, MIPI_DCS_ENTER_INVERT_MODE, NULL, 0);
- DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n");
+ dev_dbg(dev, "Panel init sequence done\n");
return 0;
}
@@ -104,13 +103,11 @@ static int kd35t133_unprepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret < 0)
- DRM_DEV_ERROR(ctx->dev, "failed to set display off: %d\n",
- ret);
+ dev_err(ctx->dev, "failed to set display off: %d\n", ret);
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev, "failed to enter sleep mode: %d\n",
- ret);
+ dev_err(ctx->dev, "failed to enter sleep mode: %d\n", ret);
return ret;
}
@@ -131,18 +128,16 @@ static int kd35t133_prepare(struct drm_panel *panel)
if (ctx->prepared)
return 0;
- DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
+ dev_dbg(ctx->dev, "Resetting the panel\n");
ret = regulator_enable(ctx->vdd);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev,
- "Failed to enable vdd supply: %d\n", ret);
+ dev_err(ctx->dev, "Failed to enable vdd supply: %d\n", ret);
return ret;
}
ret = regulator_enable(ctx->iovcc);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev,
- "Failed to enable iovcc supply: %d\n", ret);
+ dev_err(ctx->dev, "Failed to enable iovcc supply: %d\n", ret);
goto disable_vdd;
}
@@ -156,7 +151,7 @@ static int kd35t133_prepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
+ dev_err(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
goto disable_iovcc;
}
@@ -164,14 +159,13 @@ static int kd35t133_prepare(struct drm_panel *panel)
ret = kd35t133_init_sequence(ctx);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
- ret);
+ dev_err(ctx->dev, "Panel init sequence failed: %d\n", ret);
goto disable_iovcc;
}
ret = mipi_dsi_dcs_set_display_on(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev, "Failed to set display on: %d\n", ret);
+ dev_err(ctx->dev, "Failed to set display on: %d\n", ret);
goto disable_iovcc;
}
@@ -210,9 +204,9 @@ static int kd35t133_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev, &default_mode);
if (!mode) {
- DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n",
- default_mode.hdisplay, default_mode.vdisplay,
- drm_mode_vrefresh(&default_mode));
+ dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n",
+ default_mode.hdisplay, default_mode.vdisplay,
+ drm_mode_vrefresh(&default_mode));
return -ENOMEM;
}
@@ -244,7 +238,7 @@ static int kd35t133_probe(struct mipi_dsi_device *dsi)
ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset_gpio)) {
- DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
+ dev_err(dev, "cannot get reset gpio\n");
return PTR_ERR(ctx->reset_gpio);
}
@@ -252,9 +246,7 @@ static int kd35t133_probe(struct mipi_dsi_device *dsi)
if (IS_ERR(ctx->vdd)) {
ret = PTR_ERR(ctx->vdd);
if (ret != -EPROBE_DEFER)
- DRM_DEV_ERROR(dev,
- "Failed to request vdd regulator: %d\n",
- ret);
+ dev_err(dev, "Failed to request vdd regulator: %d\n", ret);
return ret;
}
@@ -262,9 +254,7 @@ static int kd35t133_probe(struct mipi_dsi_device *dsi)
if (IS_ERR(ctx->iovcc)) {
ret = PTR_ERR(ctx->iovcc);
if (ret != -EPROBE_DEFER)
- DRM_DEV_ERROR(dev,
- "Failed to request iovcc regulator: %d\n",
- ret);
+ dev_err(dev, "Failed to request iovcc regulator: %d\n", ret);
return ret;
}
@@ -288,7 +278,7 @@ static int kd35t133_probe(struct mipi_dsi_device *dsi)
ret = mipi_dsi_attach(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "mipi_dsi_attach failed: %d\n", ret);
+ dev_err(dev, "mipi_dsi_attach failed: %d\n", ret);
drm_panel_remove(&ctx->panel);
return ret;
}
@@ -303,13 +293,11 @@ static void kd35t133_shutdown(struct mipi_dsi_device *dsi)
ret = drm_panel_unprepare(&ctx->panel);
if (ret < 0)
- DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
- ret);
+ dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret);
ret = drm_panel_disable(&ctx->panel);
if (ret < 0)
- DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
- ret);
+ dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret);
}
static int kd35t133_remove(struct mipi_dsi_device *dsi)
@@ -321,8 +309,7 @@ static int kd35t133_remove(struct mipi_dsi_device *dsi)
ret = mipi_dsi_detach(dsi);
if (ret < 0)
- DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
- ret);
+ dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
drm_panel_remove(&ctx->panel);
diff --git a/drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c b/drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c
index 0b7e82e5ba4e..2a602aee61c3 100644
--- a/drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c
+++ b/drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c
@@ -13,7 +13,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
#define K101_IM2BA02_INIT_CMD_LEN 2
@@ -374,13 +373,11 @@ static int k101_im2ba02_unprepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_off(ctx->dsi);
if (ret < 0)
- DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n",
- ret);
+ dev_err(panel->dev, "failed to set display off: %d\n", ret);
ret = mipi_dsi_dcs_enter_sleep_mode(ctx->dsi);
if (ret < 0)
- DRM_DEV_ERROR(panel->dev, "failed to enter sleep mode: %d\n",
- ret);
+ dev_err(panel->dev, "failed to enter sleep mode: %d\n", ret);
msleep(200);
@@ -416,10 +413,10 @@ static int k101_im2ba02_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev, &k101_im2ba02_default_mode);
if (!mode) {
- DRM_DEV_ERROR(&ctx->dsi->dev, "failed to add mode %ux%ux@%u\n",
- k101_im2ba02_default_mode.hdisplay,
- k101_im2ba02_default_mode.vdisplay,
- drm_mode_vrefresh(&k101_im2ba02_default_mode));
+ dev_err(&ctx->dsi->dev, "failed to add mode %ux%u@%u\n",
+ k101_im2ba02_default_mode.hdisplay,
+ k101_im2ba02_default_mode.vdisplay,
+ drm_mode_vrefresh(&k101_im2ba02_default_mode));
return -ENOMEM;
}
@@ -460,13 +457,13 @@ static int k101_im2ba02_dsi_probe(struct mipi_dsi_device *dsi)
ret = devm_regulator_bulk_get(&dsi->dev, ARRAY_SIZE(ctx->supplies),
ctx->supplies);
if (ret < 0) {
- DRM_DEV_ERROR(&dsi->dev, "Couldn't get regulators\n");
+ dev_err(&dsi->dev, "Couldn't get regulators\n");
return ret;
}
ctx->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset)) {
- DRM_DEV_ERROR(&dsi->dev, "Couldn't get our reset GPIO\n");
+ dev_err(&dsi->dev, "Couldn't get our reset GPIO\n");
return PTR_ERR(ctx->reset);
}
diff --git a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
index f9edee69fea4..581661b506f8 100644
--- a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
+++ b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
@@ -7,7 +7,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
#include <linux/gpio/consumer.h>
#include <linux/delay.h>
@@ -118,13 +117,11 @@ static int feiyang_unprepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_off(ctx->dsi);
if (ret < 0)
- DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n",
- ret);
+ dev_err(panel->dev, "failed to set display off: %d\n", ret);
ret = mipi_dsi_dcs_enter_sleep_mode(ctx->dsi);
if (ret < 0)
- DRM_DEV_ERROR(panel->dev, "failed to enter sleep mode: %d\n",
- ret);
+ dev_err(panel->dev, "failed to enter sleep mode: %d\n", ret);
/* T13 (backlight fall + video & logic signal fall) T13 >= 200ms */
msleep(200);
@@ -165,10 +162,10 @@ static int feiyang_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev, &feiyang_default_mode);
if (!mode) {
- DRM_DEV_ERROR(&ctx->dsi->dev, "failed to add mode %ux%ux@%u\n",
- feiyang_default_mode.hdisplay,
- feiyang_default_mode.vdisplay,
- drm_mode_vrefresh(&feiyang_default_mode));
+ dev_err(&ctx->dsi->dev, "failed to add mode %ux%u@%u\n",
+ feiyang_default_mode.hdisplay,
+ feiyang_default_mode.vdisplay,
+ drm_mode_vrefresh(&feiyang_default_mode));
return -ENOMEM;
}
@@ -204,19 +201,19 @@ static int feiyang_dsi_probe(struct mipi_dsi_device *dsi)
ctx->dvdd = devm_regulator_get(&dsi->dev, "dvdd");
if (IS_ERR(ctx->dvdd)) {
- DRM_DEV_ERROR(&dsi->dev, "Couldn't get dvdd regulator\n");
+ dev_err(&dsi->dev, "Couldn't get dvdd regulator\n");
return PTR_ERR(ctx->dvdd);
}
ctx->avdd = devm_regulator_get(&dsi->dev, "avdd");
if (IS_ERR(ctx->avdd)) {
- DRM_DEV_ERROR(&dsi->dev, "Couldn't get avdd regulator\n");
+ dev_err(&dsi->dev, "Couldn't get avdd regulator\n");
return PTR_ERR(ctx->avdd);
}
ctx->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset)) {
- DRM_DEV_ERROR(&dsi->dev, "Couldn't get our reset GPIO\n");
+ dev_err(&dsi->dev, "Couldn't get our reset GPIO\n");
return PTR_ERR(ctx->reset);
}
diff --git a/drivers/gpu/drm/panel/panel-ilitek-ili9322.c b/drivers/gpu/drm/panel/panel-ilitek-ili9322.c
index 968845894725..074e18559b9f 100644
--- a/drivers/gpu/drm/panel/panel-ilitek-ili9322.c
+++ b/drivers/gpu/drm/panel/panel-ilitek-ili9322.c
@@ -33,7 +33,6 @@
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
#define ILI9322_CHIP_ID 0x00
#define ILI9322_CHIP_ID_MAGIC 0x96
@@ -683,7 +682,7 @@ static int ili9322_get_modes(struct drm_panel *panel,
break;
}
if (!mode) {
- DRM_ERROR("bad mode or failed to add mode\n");
+ dev_err(panel->dev, "bad mode or failed to add mode\n");
return -EINVAL;
}
drm_mode_set_name(mode);
diff --git a/drivers/gpu/drm/panel/panel-innolux-p079zca.c b/drivers/gpu/drm/panel/panel-innolux-p079zca.c
index 1a8e69c64125..aea316225391 100644
--- a/drivers/gpu/drm/panel/panel-innolux-p079zca.c
+++ b/drivers/gpu/drm/panel/panel-innolux-p079zca.c
@@ -17,7 +17,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
struct panel_init_cmd {
size_t len;
@@ -85,13 +84,11 @@ static int innolux_panel_unprepare(struct drm_panel *panel)
err = mipi_dsi_dcs_set_display_off(innolux->link);
if (err < 0)
- DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n",
- err);
+ dev_err(panel->dev, "failed to set display off: %d\n", err);
err = mipi_dsi_dcs_enter_sleep_mode(innolux->link);
if (err < 0) {
- DRM_DEV_ERROR(panel->dev, "failed to enter sleep mode: %d\n",
- err);
+ dev_err(panel->dev, "failed to enter sleep mode: %d\n", err);
return err;
}
@@ -147,8 +144,7 @@ static int innolux_panel_prepare(struct drm_panel *panel)
err = mipi_dsi_generic_write(innolux->link, cmd->data,
cmd->len);
if (err < 0) {
- dev_err(panel->dev,
- "failed to write command %u\n", i);
+ dev_err(panel->dev, "failed to write command %u\n", i);
goto poweroff;
}
@@ -159,8 +155,7 @@ static int innolux_panel_prepare(struct drm_panel *panel)
*/
err = mipi_dsi_dcs_nop(innolux->link);
if (err < 0) {
- dev_err(panel->dev,
- "failed to send DCS nop: %d\n", err);
+ dev_err(panel->dev, "failed to send DCS nop: %d\n", err);
goto poweroff;
}
}
@@ -168,8 +163,7 @@ static int innolux_panel_prepare(struct drm_panel *panel)
err = mipi_dsi_dcs_exit_sleep_mode(innolux->link);
if (err < 0) {
- DRM_DEV_ERROR(panel->dev, "failed to exit sleep mode: %d\n",
- err);
+ dev_err(panel->dev, "failed to exit sleep mode: %d\n", err);
goto poweroff;
}
@@ -178,8 +172,7 @@ static int innolux_panel_prepare(struct drm_panel *panel)
err = mipi_dsi_dcs_set_display_on(innolux->link);
if (err < 0) {
- DRM_DEV_ERROR(panel->dev, "failed to set display on: %d\n",
- err);
+ dev_err(panel->dev, "failed to set display on: %d\n", err);
goto poweroff;
}
@@ -398,8 +391,8 @@ static int innolux_panel_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev, m);
if (!mode) {
- DRM_DEV_ERROR(panel->dev, "failed to add mode %ux%ux@%u\n",
- m->hdisplay, m->vdisplay, drm_mode_vrefresh(m));
+ dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
+ m->hdisplay, m->vdisplay, drm_mode_vrefresh(m));
return -ENOMEM;
}
@@ -512,17 +505,15 @@ static int innolux_panel_remove(struct mipi_dsi_device *dsi)
err = drm_panel_unprepare(&innolux->base);
if (err < 0)
- DRM_DEV_ERROR(&dsi->dev, "failed to unprepare panel: %d\n",
- err);
+ dev_err(&dsi->dev, "failed to unprepare panel: %d\n", err);
err = drm_panel_disable(&innolux->base);
if (err < 0)
- DRM_DEV_ERROR(&dsi->dev, "failed to disable panel: %d\n", err);
+ dev_err(&dsi->dev, "failed to disable panel: %d\n", err);
err = mipi_dsi_detach(dsi);
if (err < 0)
- DRM_DEV_ERROR(&dsi->dev, "failed to detach from DSI host: %d\n",
- err);
+ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err);
innolux_panel_del(innolux);
diff --git a/drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c b/drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c
index f42dc2ceeb07..86e4213e8bb1 100644
--- a/drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c
+++ b/drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c
@@ -16,7 +16,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
struct kingdisplay_panel {
struct drm_panel base;
@@ -191,8 +190,7 @@ static int kingdisplay_panel_disable(struct drm_panel *panel)
err = mipi_dsi_dcs_set_display_off(kingdisplay->link);
if (err < 0)
- DRM_DEV_ERROR(panel->dev, "failed to set display off: %d\n",
- err);
+ dev_err(panel->dev, "failed to set display off: %d\n", err);
kingdisplay->enabled = false;
@@ -209,8 +207,7 @@ static int kingdisplay_panel_unprepare(struct drm_panel *panel)
err = mipi_dsi_dcs_enter_sleep_mode(kingdisplay->link);
if (err < 0) {
- DRM_DEV_ERROR(panel->dev, "failed to enter sleep mode: %d\n",
- err);
+ dev_err(panel->dev, "failed to enter sleep mode: %d\n", err);
return err;
}
@@ -255,16 +252,14 @@ static int kingdisplay_panel_prepare(struct drm_panel *panel)
err = mipi_dsi_generic_write(kingdisplay->link, &init_code[i],
sizeof(struct kingdisplay_panel_cmd));
if (err < 0) {
- DRM_DEV_ERROR(panel->dev, "failed write init cmds: %d\n",
- err);
+ dev_err(panel->dev, "failed write init cmds: %d\n", err);
goto poweroff;
}
}
err = mipi_dsi_dcs_exit_sleep_mode(kingdisplay->link);
if (err < 0) {
- DRM_DEV_ERROR(panel->dev, "failed to exit sleep mode: %d\n",
- err);
+ dev_err(panel->dev, "failed to exit sleep mode: %d\n", err);
goto poweroff;
}
@@ -273,8 +268,7 @@ static int kingdisplay_panel_prepare(struct drm_panel *panel)
err = mipi_dsi_dcs_set_display_on(kingdisplay->link);
if (err < 0) {
- DRM_DEV_ERROR(panel->dev, "failed to set display on: %d\n",
- err);
+ dev_err(panel->dev, "failed to set display on: %d\n", err);
goto poweroff;
}
@@ -290,8 +284,7 @@ static int kingdisplay_panel_prepare(struct drm_panel *panel)
regulator_err = regulator_disable(kingdisplay->supply);
if (regulator_err)
- DRM_DEV_ERROR(panel->dev, "failed to disable regulator: %d\n",
- regulator_err);
+ dev_err(panel->dev, "failed to disable regulator: %d\n", regulator_err);
return err;
}
@@ -327,9 +320,9 @@ static int kingdisplay_panel_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev, &default_mode);
if (!mode) {
- DRM_DEV_ERROR(panel->dev, "failed to add mode %ux%ux@%u\n",
- default_mode.hdisplay, default_mode.vdisplay,
- drm_mode_vrefresh(&default_mode));
+ dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
+ default_mode.hdisplay, default_mode.vdisplay,
+ drm_mode_vrefresh(&default_mode));
return -ENOMEM;
}
@@ -423,17 +416,15 @@ static int kingdisplay_panel_remove(struct mipi_dsi_device *dsi)
err = drm_panel_unprepare(&kingdisplay->base);
if (err < 0)
- DRM_DEV_ERROR(&dsi->dev, "failed to unprepare panel: %d\n",
- err);
+ dev_err(&dsi->dev, "failed to unprepare panel: %d\n", err);
err = drm_panel_disable(&kingdisplay->base);
if (err < 0)
- DRM_DEV_ERROR(&dsi->dev, "failed to disable panel: %d\n", err);
+ dev_err(&dsi->dev, "failed to disable panel: %d\n", err);
err = mipi_dsi_detach(dsi);
if (err < 0)
- DRM_DEV_ERROR(&dsi->dev, "failed to detach from DSI host: %d\n",
- err);
+ dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err);
kingdisplay_panel_del(kingdisplay);
diff --git a/drivers/gpu/drm/panel/panel-novatek-nt35510.c b/drivers/gpu/drm/panel/panel-novatek-nt35510.c
index 64c8cf2bae7c..b9a0e56f33e2 100644
--- a/drivers/gpu/drm/panel/panel-novatek-nt35510.c
+++ b/drivers/gpu/drm/panel/panel-novatek-nt35510.c
@@ -35,7 +35,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
#define MCS_CMD_MAUCCTR 0xF0 /* Manufacturer command enable */
#define MCS_CMD_READ_ID1 0xDA
@@ -404,9 +403,7 @@ static int nt35510_send_long(struct nt35510 *nt, struct mipi_dsi_device *dsi,
chunk = 15;
ret = mipi_dsi_dcs_write(dsi, cmd, seqp, chunk);
if (ret < 0) {
- DRM_DEV_ERROR(nt->dev,
- "error sending DCS command seq cmd %02x\n",
- cmd);
+ dev_err(nt->dev, "error sending DCS command seq cmd %02x\n", cmd);
return ret;
}
cmdwritten += chunk;
@@ -418,16 +415,13 @@ static int nt35510_send_long(struct nt35510 *nt, struct mipi_dsi_device *dsi,
chunk = 15;
ret = mipi_dsi_generic_write(dsi, seqp, chunk);
if (ret < 0) {
- DRM_DEV_ERROR(nt->dev,
- "error sending generic write seq %02x\n",
- cmd);
+ dev_err(nt->dev, "error sending generic write seq %02x\n", cmd);
return ret;
}
cmdwritten += chunk;
seqp += chunk;
}
- DRM_DEV_DEBUG(nt->dev, "sent command %02x %02x bytes\n",
- cmd, cmdlen);
+ dev_dbg(nt->dev, "sent command %02x %02x bytes\n", cmd, cmdlen);
return 0;
}
@@ -439,17 +433,17 @@ static int nt35510_read_id(struct nt35510 *nt)
ret = mipi_dsi_dcs_read(dsi, MCS_CMD_READ_ID1, &id1, 1);
if (ret < 0) {
- DRM_DEV_ERROR(nt->dev, "could not read MTP ID1\n");
+ dev_err(nt->dev, "could not read MTP ID1\n");
return ret;
}
ret = mipi_dsi_dcs_read(dsi, MCS_CMD_READ_ID2, &id2, 1);
if (ret < 0) {
- DRM_DEV_ERROR(nt->dev, "could not read MTP ID2\n");
+ dev_err(nt->dev, "could not read MTP ID2\n");
return ret;
}
ret = mipi_dsi_dcs_read(dsi, MCS_CMD_READ_ID3, &id3, 1);
if (ret < 0) {
- DRM_DEV_ERROR(nt->dev, "could not read MTP ID3\n");
+ dev_err(nt->dev, "could not read MTP ID3\n");
return ret;
}
@@ -458,9 +452,7 @@ static int nt35510_read_id(struct nt35510 *nt)
* ID (e.g. Hydis 0x55), driver ID (e.g. NT35510 0xc0) and
* version.
*/
- DRM_DEV_INFO(nt->dev,
- "MTP ID manufacturer: %02x version: %02x driver: %02x\n",
- id1, id2, id3);
+ dev_info(nt->dev, "MTP ID manufacturer: %02x version: %02x driver: %02x\n", id1, id2, id3);
return 0;
}
@@ -661,7 +653,7 @@ static int nt35510_set_brightness(struct backlight_device *bl)
u8 brightness = bl->props.brightness;
int ret;
- DRM_DEV_DEBUG(nt->dev, "set brightness %d\n", brightness);
+ dev_dbg(nt->dev, "set brightness %d\n", brightness);
ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
&brightness,
sizeof(brightness));
@@ -796,8 +788,7 @@ static int nt35510_unprepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret) {
- DRM_DEV_ERROR(nt->dev, "failed to turn display off (%d)\n",
- ret);
+ dev_err(nt->dev, "failed to turn display off (%d)\n", ret);
return ret;
}
usleep_range(10000, 20000);
@@ -805,8 +796,7 @@ static int nt35510_unprepare(struct drm_panel *panel)
/* Enter sleep mode */
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
if (ret) {
- DRM_DEV_ERROR(nt->dev, "failed to enter sleep mode (%d)\n",
- ret);
+ dev_err(nt->dev, "failed to enter sleep mode (%d)\n", ret);
return ret;
}
@@ -833,8 +823,7 @@ static int nt35510_prepare(struct drm_panel *panel)
/* Exit sleep mode */
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret) {
- DRM_DEV_ERROR(nt->dev, "failed to exit sleep mode (%d)\n",
- ret);
+ dev_err(nt->dev, "failed to exit sleep mode (%d)\n", ret);
return ret;
}
/* Up to 120 ms */
@@ -842,8 +831,7 @@ static int nt35510_prepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_on(dsi);
if (ret) {
- DRM_DEV_ERROR(nt->dev, "failed to turn display on (%d)\n",
- ret);
+ dev_err(nt->dev, "failed to turn display on (%d)\n", ret);
return ret;
}
/* Some 10 ms */
@@ -864,7 +852,7 @@ static int nt35510_get_modes(struct drm_panel *panel,
info->height_mm = nt->conf->height_mm;
mode = drm_mode_duplicate(connector->dev, &nt->conf->mode);
if (!mode) {
- DRM_ERROR("bad mode or failed to add mode\n");
+ dev_err(panel->dev, "bad mode or failed to add mode\n");
return -EINVAL;
}
drm_mode_set_name(mode);
@@ -963,7 +951,7 @@ static int nt35510_probe(struct mipi_dsi_device *dsi)
bl = devm_backlight_device_register(dev, "nt35510", dev, nt,
&nt35510_bl_ops, NULL);
if (IS_ERR(bl)) {
- DRM_DEV_ERROR(dev, "failed to register backlight device\n");
+ dev_err(dev, "failed to register backlight device\n");
return PTR_ERR(bl);
}
bl->props.max_brightness = 255;
diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
index d956522f32ee..b6e377aa1131 100644
--- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
+++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
@@ -17,7 +17,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
#define OTM8009A_BACKLIGHT_DEFAULT 240
#define OTM8009A_BACKLIGHT_MAX 255
@@ -97,7 +96,7 @@ static void otm8009a_dcs_write_buf(struct otm8009a *ctx, const void *data,
struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
if (mipi_dsi_dcs_write_buffer(dsi, data, len) < 0)
- DRM_WARN("mipi dsi dcs write buffer failed\n");
+ dev_warn(ctx->dev, "mipi dsi dcs write buffer failed\n");
}
static void otm8009a_dcs_write_buf_hs(struct otm8009a *ctx, const void *data,
@@ -313,7 +312,7 @@ static int otm8009a_prepare(struct drm_panel *panel)
ret = regulator_enable(ctx->supply);
if (ret < 0) {
- DRM_ERROR("failed to enable supply: %d\n", ret);
+ dev_err(panel->dev, "failed to enable supply: %d\n", ret);
return ret;
}
@@ -355,9 +354,9 @@ static int otm8009a_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev, &default_mode);
if (!mode) {
- DRM_ERROR("failed to add mode %ux%ux@%u\n",
- default_mode.hdisplay, default_mode.vdisplay,
- drm_mode_vrefresh(&default_mode));
+ dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
+ default_mode.hdisplay, default_mode.vdisplay,
+ drm_mode_vrefresh(&default_mode));
return -ENOMEM;
}
@@ -390,7 +389,7 @@ static int otm8009a_backlight_update_status(struct backlight_device *bd)
u8 data[2];
if (!ctx->prepared) {
- DRM_DEBUG("lcd not ready yet for setting its backlight!\n");
+ dev_dbg(&bd->dev, "lcd not ready yet for setting its backlight!\n");
return -ENXIO;
}
diff --git a/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c b/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c
index ea74958d7544..535c8d1cca21 100644
--- a/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c
+++ b/drivers/gpu/drm/panel/panel-ronbo-rb070d30.c
@@ -23,7 +23,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
struct rb070d30_panel {
struct drm_panel panel;
@@ -50,7 +49,7 @@ static int rb070d30_panel_prepare(struct drm_panel *panel)
ret = regulator_enable(ctx->supply);
if (ret < 0) {
- DRM_DEV_ERROR(&ctx->dsi->dev, "Failed to enable supply: %d\n", ret);
+ dev_err(&ctx->dsi->dev, "Failed to enable supply: %d\n", ret);
return ret;
}
@@ -117,9 +116,8 @@ static int rb070d30_panel_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev, &default_mode);
if (!mode) {
- DRM_DEV_ERROR(&ctx->dsi->dev,
- "Failed to add mode " DRM_MODE_FMT "\n",
- DRM_MODE_ARG(&default_mode));
+ dev_err(&ctx->dsi->dev, "Failed to add mode " DRM_MODE_FMT "\n",
+ DRM_MODE_ARG(&default_mode));
return -EINVAL;
}
@@ -166,13 +164,13 @@ static int rb070d30_panel_dsi_probe(struct mipi_dsi_device *dsi)
ctx->gpios.reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->gpios.reset)) {
- DRM_DEV_ERROR(&dsi->dev, "Couldn't get our reset GPIO\n");
+ dev_err(&dsi->dev, "Couldn't get our reset GPIO\n");
return PTR_ERR(ctx->gpios.reset);
}
ctx->gpios.power = devm_gpiod_get(&dsi->dev, "power", GPIOD_OUT_LOW);
if (IS_ERR(ctx->gpios.power)) {
- DRM_DEV_ERROR(&dsi->dev, "Couldn't get our power GPIO\n");
+ dev_err(&dsi->dev, "Couldn't get our power GPIO\n");
return PTR_ERR(ctx->gpios.power);
}
@@ -182,7 +180,7 @@ static int rb070d30_panel_dsi_probe(struct mipi_dsi_device *dsi)
*/
ctx->gpios.updn = devm_gpiod_get(&dsi->dev, "updn", GPIOD_OUT_LOW);
if (IS_ERR(ctx->gpios.updn)) {
- DRM_DEV_ERROR(&dsi->dev, "Couldn't get our updn GPIO\n");
+ dev_err(&dsi->dev, "Couldn't get our updn GPIO\n");
return PTR_ERR(ctx->gpios.updn);
}
@@ -192,7 +190,7 @@ static int rb070d30_panel_dsi_probe(struct mipi_dsi_device *dsi)
*/
ctx->gpios.shlr = devm_gpiod_get(&dsi->dev, "shlr", GPIOD_OUT_LOW);
if (IS_ERR(ctx->gpios.shlr)) {
- DRM_DEV_ERROR(&dsi->dev, "Couldn't get our shlr GPIO\n");
+ dev_err(&dsi->dev, "Couldn't get our shlr GPIO\n");
return PTR_ERR(ctx->gpios.shlr);
}
diff --git a/drivers/gpu/drm/panel/panel-sony-acx424akp.c b/drivers/gpu/drm/panel/panel-sony-acx424akp.c
index 57575c40f2aa..065efae213f5 100644
--- a/drivers/gpu/drm/panel/panel-sony-acx424akp.c
+++ b/drivers/gpu/drm/panel/panel-sony-acx424akp.c
@@ -20,7 +20,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
#define ACX424_DCS_READ_ID1 0xDA
#define ACX424_DCS_READ_ID2 0xDB
@@ -110,13 +109,11 @@ static int acx424akp_set_brightness(struct backlight_device *bl)
SCALE_FACTOR_NS_DIV_MHZ);
/* Set up PWM dutycycle ONE byte (differs from the standard) */
- DRM_DEV_DEBUG(acx->dev, "calculated duty cycle %02x\n", pwm_ratio);
+ dev_dbg(acx->dev, "calculated duty cycle %02x\n", pwm_ratio);
ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
&pwm_ratio, 1);
if (ret < 0) {
- DRM_DEV_ERROR(acx->dev,
- "failed to set display PWM ratio (%d)\n",
- ret);
+ dev_err(acx->dev, "failed to set display PWM ratio (%d)\n", ret);
return ret;
}
@@ -132,40 +129,30 @@ static int acx424akp_set_brightness(struct backlight_device *bl)
par = 0xaa;
ret = mipi_dsi_dcs_write(dsi, 0xf3, &par, 1);
if (ret < 0) {
- DRM_DEV_ERROR(acx->dev,
- "failed to unlock CMD 2 (%d)\n",
- ret);
+ dev_err(acx->dev, "failed to unlock CMD 2 (%d)\n", ret);
return ret;
}
par = 0x01;
ret = mipi_dsi_dcs_write(dsi, 0x00, &par, 1);
if (ret < 0) {
- DRM_DEV_ERROR(acx->dev,
- "failed to enter page 1 (%d)\n",
- ret);
+ dev_err(acx->dev, "failed to enter page 1 (%d)\n", ret);
return ret;
}
par = 0x01;
ret = mipi_dsi_dcs_write(dsi, 0x7d, &par, 1);
if (ret < 0) {
- DRM_DEV_ERROR(acx->dev,
- "failed to disable MTP reload (%d)\n",
- ret);
+ dev_err(acx->dev, "failed to disable MTP reload (%d)\n", ret);
return ret;
}
ret = mipi_dsi_dcs_write(dsi, 0x22, &pwm_div, 1);
if (ret < 0) {
- DRM_DEV_ERROR(acx->dev,
- "failed to set PWM divisor (%d)\n",
- ret);
+ dev_err(acx->dev, "failed to set PWM divisor (%d)\n", ret);
return ret;
}
par = 0xaa;
ret = mipi_dsi_dcs_write(dsi, 0x7f, &par, 1);
if (ret < 0) {
- DRM_DEV_ERROR(acx->dev,
- "failed to lock CMD 2 (%d)\n",
- ret);
+ dev_err(acx->dev, "failed to lock CMD 2 (%d)\n", ret);
return ret;
}
@@ -174,9 +161,7 @@ static int acx424akp_set_brightness(struct backlight_device *bl)
ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY,
&par, 1);
if (ret < 0) {
- DRM_DEV_ERROR(acx->dev,
- "failed to enable display backlight (%d)\n",
- ret);
+ dev_err(acx->dev, "failed to enable display backlight (%d)\n", ret);
return ret;
}
@@ -196,22 +181,22 @@ static int acx424akp_read_id(struct acx424akp *acx)
ret = mipi_dsi_dcs_read(dsi, ACX424_DCS_READ_ID1, &vendor, 1);
if (ret < 0) {
- DRM_DEV_ERROR(acx->dev, "could not vendor ID byte\n");
+ dev_err(acx->dev, "could not vendor ID byte\n");
return ret;
}
ret = mipi_dsi_dcs_read(dsi, ACX424_DCS_READ_ID2, &version, 1);
if (ret < 0) {
- DRM_DEV_ERROR(acx->dev, "could not read device version byte\n");
+ dev_err(acx->dev, "could not read device version byte\n");
return ret;
}
ret = mipi_dsi_dcs_read(dsi, ACX424_DCS_READ_ID3, &panel, 1);
if (ret < 0) {
- DRM_DEV_ERROR(acx->dev, "could not read panel ID byte\n");
+ dev_err(acx->dev, "could not read panel ID byte\n");
return ret;
}
if (vendor == 0x00) {
- DRM_DEV_ERROR(acx->dev, "device vendor ID is zero\n");
+ dev_err(acx->dev, "device vendor ID is zero\n");
return -ENODEV;
}
@@ -220,14 +205,12 @@ static int acx424akp_read_id(struct acx424akp *acx)
case DISPLAY_SONY_ACX424AKP_ID1:
case DISPLAY_SONY_ACX424AKP_ID2:
case DISPLAY_SONY_ACX424AKP_ID3:
- DRM_DEV_INFO(acx->dev,
- "MTP vendor: %02x, version: %02x, panel: %02x\n",
- vendor, version, panel);
+ dev_info(acx->dev, "MTP vendor: %02x, version: %02x, panel: %02x\n",
+ vendor, version, panel);
break;
default:
- DRM_DEV_INFO(acx->dev,
- "unknown vendor: %02x, version: %02x, panel: %02x\n",
- vendor, version, panel);
+ dev_info(acx->dev, "unknown vendor: %02x, version: %02x, panel: %02x\n",
+ vendor, version, panel);
break;
}
@@ -240,7 +223,7 @@ static int acx424akp_power_on(struct acx424akp *acx)
ret = regulator_enable(acx->supply);
if (ret) {
- DRM_DEV_ERROR(acx->dev, "failed to enable supply (%d)\n", ret);
+ dev_err(acx->dev, "failed to enable supply (%d)\n", ret);
return ret;
}
@@ -276,7 +259,7 @@ static int acx424akp_prepare(struct drm_panel *panel)
ret = acx424akp_read_id(acx);
if (ret) {
- DRM_DEV_ERROR(acx->dev, "failed to read panel ID (%d)\n", ret);
+ dev_err(acx->dev, "failed to read panel ID (%d)\n", ret);
goto err_power_off;
}
@@ -284,8 +267,7 @@ static int acx424akp_prepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_tear_on(dsi,
MIPI_DSI_DCS_TEAR_MODE_VBLANK);
if (ret) {
- DRM_DEV_ERROR(acx->dev, "failed to enable vblank TE (%d)\n",
- ret);
+ dev_err(acx->dev, "failed to enable vblank TE (%d)\n", ret);
goto err_power_off;
}
@@ -302,23 +284,21 @@ static int acx424akp_prepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_write(dsi, ACX424_DCS_SET_MDDI,
&mddi, sizeof(mddi));
if (ret < 0) {
- DRM_DEV_ERROR(acx->dev, "failed to set MDDI (%d)\n", ret);
+ dev_err(acx->dev, "failed to set MDDI (%d)\n", ret);
goto err_power_off;
}
/* Exit sleep mode */
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret) {
- DRM_DEV_ERROR(acx->dev, "failed to exit sleep mode (%d)\n",
- ret);
+ dev_err(acx->dev, "failed to exit sleep mode (%d)\n", ret);
goto err_power_off;
}
msleep(140);
ret = mipi_dsi_dcs_set_display_on(dsi);
if (ret) {
- DRM_DEV_ERROR(acx->dev, "failed to turn display on (%d)\n",
- ret);
+ dev_err(acx->dev, "failed to turn display on (%d)\n", ret);
goto err_power_off;
}
if (acx->video_mode) {
@@ -351,24 +331,20 @@ static int acx424akp_unprepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY,
&par, 1);
if (ret) {
- DRM_DEV_ERROR(acx->dev,
- "failed to disable display backlight (%d)\n",
- ret);
+ dev_err(acx->dev, "failed to disable display backlight (%d)\n", ret);
return ret;
}
ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret) {
- DRM_DEV_ERROR(acx->dev, "failed to turn display off (%d)\n",
- ret);
+ dev_err(acx->dev, "failed to turn display off (%d)\n", ret);
return ret;
}
/* Enter sleep mode */
ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
if (ret) {
- DRM_DEV_ERROR(acx->dev, "failed to enter sleep mode (%d)\n",
- ret);
+ dev_err(acx->dev, "failed to enter sleep mode (%d)\n", ret);
return ret;
}
msleep(85);
@@ -418,7 +394,7 @@ static int acx424akp_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev,
&sony_acx424akp_cmd_mode);
if (!mode) {
- DRM_ERROR("bad mode or failed to add mode\n");
+ dev_err(panel->dev, "bad mode or failed to add mode\n");
return -EINVAL;
}
drm_mode_set_name(mode);
@@ -486,8 +462,7 @@ static int acx424akp_probe(struct mipi_dsi_device *dsi)
if (IS_ERR(acx->reset_gpio)) {
ret = PTR_ERR(acx->reset_gpio);
if (ret != -EPROBE_DEFER)
- DRM_DEV_ERROR(dev, "failed to request GPIO (%d)\n",
- ret);
+ dev_err(dev, "failed to request GPIO (%d)\n", ret);
return ret;
}
@@ -497,7 +472,7 @@ static int acx424akp_probe(struct mipi_dsi_device *dsi)
acx->bl = devm_backlight_device_register(dev, "acx424akp", dev, acx,
&acx424akp_bl_ops, NULL);
if (IS_ERR(acx->bl)) {
- DRM_DEV_ERROR(dev, "failed to register backlight device\n");
+ dev_err(dev, "failed to register backlight device\n");
return PTR_ERR(acx->bl);
}
acx->bl->props.max_brightness = 1023;
diff --git a/drivers/gpu/drm/panel/panel-tpo-tpg110.c b/drivers/gpu/drm/panel/panel-tpo-tpg110.c
index cd00cfa6ba14..d57ed75a977c 100644
--- a/drivers/gpu/drm/panel/panel-tpo-tpg110.c
+++ b/drivers/gpu/drm/panel/panel-tpo-tpg110.c
@@ -12,7 +12,6 @@
*/
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
#include <linux/bitops.h>
#include <linux/delay.h>
@@ -238,7 +237,7 @@ static u8 tpg110_readwrite_reg(struct tpg110 *tpg, bool write,
spi_message_add_tail(&t[1], &m);
ret = spi_sync(tpg->spi, &m);
if (ret) {
- DRM_DEV_ERROR(tpg->dev, "SPI message error %d\n", ret);
+ dev_err(tpg->dev, "SPI message error %d\n", ret);
return ret;
}
if (write)
@@ -265,18 +264,18 @@ static int tpg110_startup(struct tpg110 *tpg)
/* De-assert the reset signal */
gpiod_set_value_cansleep(tpg->grestb, 0);
usleep_range(1000, 2000);
- DRM_DEV_DEBUG(tpg->dev, "de-asserted GRESTB\n");
+ dev_dbg(tpg->dev, "de-asserted GRESTB\n");
/* Test display communication */
tpg110_write_reg(tpg, TPG110_TEST, 0x55);
val = tpg110_read_reg(tpg, TPG110_TEST);
if (val != 0x55) {
- DRM_DEV_ERROR(tpg->dev, "failed communication test\n");
+ dev_err(tpg->dev, "failed communication test\n");
return -ENODEV;
}
val = tpg110_read_reg(tpg, TPG110_CHIPID);
- DRM_DEV_INFO(tpg->dev, "TPG110 chip ID: %d version: %d\n",
+ dev_info(tpg->dev, "TPG110 chip ID: %d version: %d\n",
val >> 4, val & 0x0f);
/* Show display resolution */
@@ -284,27 +283,25 @@ static int tpg110_startup(struct tpg110 *tpg)
val &= TPG110_RES_MASK;
switch (val) {
case TPG110_RES_400X240_D:
- DRM_DEV_INFO(tpg->dev,
- "IN 400x240 RGB -> OUT 800x480 RGB (dual scan)\n");
+ dev_info(tpg->dev, "IN 400x240 RGB -> OUT 800x480 RGB (dual scan)\n");
break;
case TPG110_RES_480X272_D:
- DRM_DEV_INFO(tpg->dev,
- "IN 480x272 RGB -> OUT 800x480 RGB (dual scan)\n");
+ dev_info(tpg->dev, "IN 480x272 RGB -> OUT 800x480 RGB (dual scan)\n");
break;
case TPG110_RES_480X640:
- DRM_DEV_INFO(tpg->dev, "480x640 RGB\n");
+ dev_info(tpg->dev, "480x640 RGB\n");
break;
case TPG110_RES_480X272:
- DRM_DEV_INFO(tpg->dev, "480x272 RGB\n");
+ dev_info(tpg->dev, "480x272 RGB\n");
break;
case TPG110_RES_640X480:
- DRM_DEV_INFO(tpg->dev, "640x480 RGB\n");
+ dev_info(tpg->dev, "640x480 RGB\n");
break;
case TPG110_RES_800X480:
- DRM_DEV_INFO(tpg->dev, "800x480 RGB\n");
+ dev_info(tpg->dev, "800x480 RGB\n");
break;
default:
- DRM_DEV_ERROR(tpg->dev, "ILLEGAL RESOLUTION 0x%02x\n", val);
+ dev_err(tpg->dev, "ILLEGAL RESOLUTION 0x%02x\n", val);
break;
}
@@ -322,13 +319,12 @@ static int tpg110_startup(struct tpg110 *tpg)
}
}
if (i == ARRAY_SIZE(tpg110_modes)) {
- DRM_DEV_ERROR(tpg->dev, "unsupported mode (%02x) detected\n",
- val);
+ dev_err(tpg->dev, "unsupported mode (%02x) detected\n", val);
return -ENODEV;
}
val = tpg110_read_reg(tpg, TPG110_CTRL2);
- DRM_DEV_INFO(tpg->dev, "resolution and standby is controlled by %s\n",
+ dev_info(tpg->dev, "resolution and standby is controlled by %s\n",
(val & TPG110_CTRL2_RES_PM_CTRL) ? "software" : "hardware");
/* Take control over resolution and standby */
val |= TPG110_CTRL2_RES_PM_CTRL;
@@ -414,15 +410,15 @@ static int tpg110_probe(struct spi_device *spi)
/* We get the physical display dimensions from the DT */
ret = of_property_read_u32(np, "width-mm", &tpg->width);
if (ret)
- DRM_DEV_ERROR(dev, "no panel width specified\n");
+ dev_err(dev, "no panel width specified\n");
ret = of_property_read_u32(np, "height-mm", &tpg->height);
if (ret)
- DRM_DEV_ERROR(dev, "no panel height specified\n");
+ dev_err(dev, "no panel height specified\n");
/* This asserts the GRESTB signal, putting the display into reset */
tpg->grestb = devm_gpiod_get(dev, "grestb", GPIOD_OUT_HIGH);
if (IS_ERR(tpg->grestb)) {
- DRM_DEV_ERROR(dev, "no GRESTB GPIO\n");
+ dev_err(dev, "no GRESTB GPIO\n");
return -ENODEV;
}
@@ -430,7 +426,7 @@ static int tpg110_probe(struct spi_device *spi)
spi->mode |= SPI_3WIRE_HIZ;
ret = spi_setup(spi);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "spi setup failed.\n");
+ dev_err(dev, "spi setup failed.\n");
return ret;
}
tpg->spi = spi;
diff --git a/drivers/gpu/drm/panel/panel-truly-nt35597.c b/drivers/gpu/drm/panel/panel-truly-nt35597.c
index 9b9c167b8dc8..b24b92d93ea5 100644
--- a/drivers/gpu/drm/panel/panel-truly-nt35597.c
+++ b/drivers/gpu/drm/panel/panel-truly-nt35597.c
@@ -17,7 +17,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
static const char * const regulator_names[] = {
"vdda",
@@ -231,9 +230,7 @@ static int truly_dcs_write(struct drm_panel *panel, u32 command)
for (i = 0; i < ARRAY_SIZE(ctx->dsi); i++) {
ret = mipi_dsi_dcs_write(ctx->dsi[i], command, NULL, 0);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev,
- "cmd 0x%x failed for dsi = %d\n",
- command, i);
+ dev_err(ctx->dev, "cmd 0x%x failed for dsi = %d\n", command, i);
}
}
@@ -250,8 +247,7 @@ static int truly_dcs_write_buf(struct drm_panel *panel,
for (i = 0; i < ARRAY_SIZE(ctx->dsi); i++) {
ret = mipi_dsi_dcs_write_buffer(ctx->dsi[i], buf, size);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev,
- "failed to tx cmd [%d], err: %d\n", i, ret);
+ dev_err(ctx->dev, "failed to tx cmd [%d], err: %d\n", i, ret);
return ret;
}
}
@@ -300,16 +296,14 @@ static int truly_nt35597_power_off(struct truly_nt35597 *ctx)
ret = regulator_set_load(ctx->supplies[i].consumer,
regulator_disable_loads[i]);
if (ret) {
- DRM_DEV_ERROR(ctx->dev,
- "regulator_set_load failed %d\n", ret);
+ dev_err(ctx->dev, "regulator_set_load failed %d\n", ret);
return ret;
}
}
ret = regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
if (ret) {
- DRM_DEV_ERROR(ctx->dev,
- "regulator_bulk_disable failed %d\n", ret);
+ dev_err(ctx->dev, "regulator_bulk_disable failed %d\n", ret);
}
return ret;
}
@@ -325,8 +319,7 @@ static int truly_nt35597_disable(struct drm_panel *panel)
if (ctx->backlight) {
ret = backlight_disable(ctx->backlight);
if (ret < 0)
- DRM_DEV_ERROR(ctx->dev, "backlight disable failed %d\n",
- ret);
+ dev_err(ctx->dev, "backlight disable failed %d\n", ret);
}
ctx->enabled = false;
@@ -346,9 +339,7 @@ static int truly_nt35597_unprepare(struct drm_panel *panel)
ret = truly_dcs_write(panel, MIPI_DCS_SET_DISPLAY_OFF);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev,
- "set_display_off cmd failed ret = %d\n",
- ret);
+ dev_err(ctx->dev, "set_display_off cmd failed ret = %d\n", ret);
}
/* 120ms delay required here as per DCS spec */
@@ -356,13 +347,12 @@ static int truly_nt35597_unprepare(struct drm_panel *panel)
ret = truly_dcs_write(panel, MIPI_DCS_ENTER_SLEEP_MODE);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev,
- "enter_sleep cmd failed ret = %d\n", ret);
+ dev_err(ctx->dev, "enter_sleep cmd failed ret = %d\n", ret);
}
ret = truly_nt35597_power_off(ctx);
if (ret < 0)
- DRM_DEV_ERROR(ctx->dev, "power_off failed ret = %d\n", ret);
+ dev_err(ctx->dev, "power_off failed ret = %d\n", ret);
ctx->prepared = false;
return ret;
@@ -396,18 +386,14 @@ static int truly_nt35597_prepare(struct drm_panel *panel)
panel_on_cmds[i].size,
panel_on_cmds[i].commands);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev,
- "cmd set tx failed i = %d ret = %d\n",
- i, ret);
+ dev_err(ctx->dev, "cmd set tx failed i = %d ret = %d\n", i, ret);
goto power_off;
}
}
ret = truly_dcs_write(panel, MIPI_DCS_EXIT_SLEEP_MODE);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev,
- "exit_sleep_mode cmd failed ret = %d\n",
- ret);
+ dev_err(ctx->dev, "exit_sleep_mode cmd failed ret = %d\n", ret);
goto power_off;
}
@@ -416,8 +402,7 @@ static int truly_nt35597_prepare(struct drm_panel *panel)
ret = truly_dcs_write(panel, MIPI_DCS_SET_DISPLAY_ON);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev,
- "set_display_on cmd failed ret = %d\n", ret);
+ dev_err(ctx->dev, "set_display_on cmd failed ret = %d\n", ret);
goto power_off;
}
@@ -430,7 +415,7 @@ static int truly_nt35597_prepare(struct drm_panel *panel)
power_off:
if (truly_nt35597_power_off(ctx))
- DRM_DEV_ERROR(ctx->dev, "power_off failed\n");
+ dev_err(ctx->dev, "power_off failed\n");
return ret;
}
@@ -445,8 +430,7 @@ static int truly_nt35597_enable(struct drm_panel *panel)
if (ctx->backlight) {
ret = backlight_enable(ctx->backlight);
if (ret < 0)
- DRM_DEV_ERROR(ctx->dev, "backlight enable failed %d\n",
- ret);
+ dev_err(ctx->dev, "backlight enable failed %d\n", ret);
}
ctx->enabled = true;
@@ -464,8 +448,7 @@ static int truly_nt35597_get_modes(struct drm_panel *panel,
config = ctx->config;
mode = drm_mode_create(connector->dev);
if (!mode) {
- DRM_DEV_ERROR(ctx->dev,
- "failed to create a new display mode\n");
+ dev_err(ctx->dev, "failed to create a new display mode\n");
return 0;
}
@@ -501,15 +484,13 @@ static int truly_nt35597_panel_add(struct truly_nt35597 *ctx)
ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset_gpio)) {
- DRM_DEV_ERROR(dev, "cannot get reset gpio %ld\n",
- PTR_ERR(ctx->reset_gpio));
+ dev_err(dev, "cannot get reset gpio %ld\n", PTR_ERR(ctx->reset_gpio));
return PTR_ERR(ctx->reset_gpio);
}
ctx->mode_gpio = devm_gpiod_get(dev, "mode", GPIOD_OUT_LOW);
if (IS_ERR(ctx->mode_gpio)) {
- DRM_DEV_ERROR(dev, "cannot get mode gpio %ld\n",
- PTR_ERR(ctx->mode_gpio));
+ dev_err(dev, "cannot get mode gpio %ld\n", PTR_ERR(ctx->mode_gpio));
return PTR_ERR(ctx->mode_gpio);
}
@@ -584,22 +565,21 @@ static int truly_nt35597_probe(struct mipi_dsi_device *dsi)
dsi1 = of_graph_get_remote_node(dsi->dev.of_node, 1, -1);
if (!dsi1) {
- DRM_DEV_ERROR(dev,
- "failed to get remote node for dsi1_device\n");
+ dev_err(dev, "failed to get remote node for dsi1_device\n");
return -ENODEV;
}
dsi1_host = of_find_mipi_dsi_host_by_node(dsi1);
of_node_put(dsi1);
if (!dsi1_host) {
- DRM_DEV_ERROR(dev, "failed to find dsi host\n");
+ dev_err(dev, "failed to find dsi host\n");
return -EPROBE_DEFER;
}
/* register the second DSI device */
dsi1_device = mipi_dsi_device_register_full(dsi1_host, &info);
if (IS_ERR(dsi1_device)) {
- DRM_DEV_ERROR(dev, "failed to create dsi device\n");
+ dev_err(dev, "failed to create dsi device\n");
return PTR_ERR(dsi1_device);
}
@@ -611,7 +591,7 @@ static int truly_nt35597_probe(struct mipi_dsi_device *dsi)
ret = truly_nt35597_panel_add(ctx);
if (ret) {
- DRM_DEV_ERROR(dev, "failed to add panel\n");
+ dev_err(dev, "failed to add panel\n");
goto err_panel_add;
}
@@ -623,8 +603,7 @@ static int truly_nt35597_probe(struct mipi_dsi_device *dsi)
MIPI_DSI_CLOCK_NON_CONTINUOUS;
ret = mipi_dsi_attach(dsi_dev);
if (ret < 0) {
- DRM_DEV_ERROR(dev,
- "dsi attach failed i = %d\n", i);
+ dev_err(dev, "dsi attach failed i = %d\n", i);
goto err_dsi_attach;
}
}
diff --git a/drivers/gpu/drm/panel/panel-visionox-rm69299.c b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
index a12976b497ce..eb43503ec97b 100644
--- a/drivers/gpu/drm/panel/panel-visionox-rm69299.c
+++ b/drivers/gpu/drm/panel/panel-visionox-rm69299.c
@@ -14,7 +14,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
struct visionox_rm69299 {
struct drm_panel panel;
@@ -69,16 +68,14 @@ static int visionox_rm69299_unprepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_SET_DISPLAY_OFF, NULL, 0);
if (ret < 0)
- DRM_DEV_ERROR(ctx->panel.dev,
- "set_display_off cmd failed ret = %d\n", ret);
+ dev_err(ctx->panel.dev, "set_display_off cmd failed ret = %d\n", ret);
/* 120ms delay required here as per DCS spec */
msleep(120);
ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_ENTER_SLEEP_MODE, NULL, 0);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->panel.dev,
- "enter_sleep cmd failed ret = %d\n", ret);
+ dev_err(ctx->panel.dev, "enter_sleep cmd failed ret = %d\n", ret);
}
ret = visionox_rm69299_power_off(ctx);
@@ -103,36 +100,31 @@ static int visionox_rm69299_prepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0xfe, 0x00 }, 2);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->panel.dev,
- "cmd set tx 0 failed, ret = %d\n", ret);
+ dev_err(ctx->panel.dev, "cmd set tx 0 failed, ret = %d\n", ret);
goto power_off;
}
ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0xc2, 0x08 }, 2);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->panel.dev,
- "cmd set tx 1 failed, ret = %d\n", ret);
+ dev_err(ctx->panel.dev, "cmd set tx 1 failed, ret = %d\n", ret);
goto power_off;
}
ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0x35, 0x00 }, 2);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->panel.dev,
- "cmd set tx 2 failed, ret = %d\n", ret);
+ dev_err(ctx->panel.dev, "cmd set tx 2 failed, ret = %d\n", ret);
goto power_off;
}
ret = mipi_dsi_dcs_write_buffer(ctx->dsi, (u8[]) { 0x51, 0xff }, 2);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->panel.dev,
- "cmd set tx 3 failed, ret = %d\n", ret);
+ dev_err(ctx->panel.dev, "cmd set tx 3 failed, ret = %d\n", ret);
goto power_off;
}
ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_EXIT_SLEEP_MODE, NULL, 0);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->panel.dev,
- "exit_sleep_mode cmd failed ret = %d\n", ret);
+ dev_err(ctx->panel.dev, "exit_sleep_mode cmd failed ret = %d\n", ret);
goto power_off;
}
@@ -141,8 +133,7 @@ static int visionox_rm69299_prepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_write(ctx->dsi, MIPI_DCS_SET_DISPLAY_ON, NULL, 0);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->panel.dev,
- "set_display_on cmd failed ret = %d\n", ret);
+ dev_err(ctx->panel.dev, "set_display_on cmd failed ret = %d\n", ret);
goto power_off;
}
@@ -179,8 +170,7 @@ static int visionox_rm69299_get_modes(struct drm_panel *panel,
mode = drm_mode_create(connector->dev);
if (!mode) {
- DRM_DEV_ERROR(ctx->panel.dev,
- "failed to create a new display mode\n");
+ dev_err(ctx->panel.dev, "failed to create a new display mode\n");
return 0;
}
@@ -225,8 +215,7 @@ static int visionox_rm69299_probe(struct mipi_dsi_device *dsi)
ctx->reset_gpio = devm_gpiod_get(ctx->panel.dev,
"reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset_gpio)) {
- DRM_DEV_ERROR(dev, "cannot get reset gpio %ld\n",
- PTR_ERR(ctx->reset_gpio));
+ dev_err(dev, "cannot get reset gpio %ld\n", PTR_ERR(ctx->reset_gpio));
return PTR_ERR(ctx->reset_gpio);
}
@@ -242,23 +231,19 @@ static int visionox_rm69299_probe(struct mipi_dsi_device *dsi)
MIPI_DSI_CLOCK_NON_CONTINUOUS;
ret = mipi_dsi_attach(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "dsi attach failed ret = %d\n", ret);
+ dev_err(dev, "dsi attach failed ret = %d\n", ret);
goto err_dsi_attach;
}
ret = regulator_set_load(ctx->supplies[0].consumer, 32000);
if (ret) {
- DRM_DEV_ERROR(dev,
- "regulator set load failed for vdda supply ret = %d\n",
- ret);
+ dev_err(dev, "regulator set load failed for vdda supply ret = %d\n", ret);
goto err_set_load;
}
ret = regulator_set_load(ctx->supplies[1].consumer, 13200);
if (ret) {
- DRM_DEV_ERROR(dev,
- "regulator set load failed for vdd3p3 supply ret = %d\n",
- ret);
+ dev_err(dev, "regulator set load failed for vdd3p3 supply ret = %d\n", ret);
goto err_set_load;
}
diff --git a/drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c b/drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c
index 06341deb60ca..55172d63a922 100644
--- a/drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c
+++ b/drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c
@@ -12,7 +12,6 @@
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_modes.h>
#include <drm/drm_panel.h>
-#include <drm/drm_print.h>
#include <video/display_timing.h>
#include <video/mipi_display.h>
@@ -135,7 +134,7 @@ static int xpp055c272_init_sequence(struct xpp055c272 *ctx)
msleep(60);
- DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done\n");
+ dev_dbg(dev, "Panel init sequence done\n");
return 0;
}
@@ -150,13 +149,11 @@ static int xpp055c272_unprepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_off(dsi);
if (ret < 0)
- DRM_DEV_ERROR(ctx->dev, "failed to set display off: %d\n",
- ret);
+ dev_err(ctx->dev, "failed to set display off: %d\n", ret);
mipi_dsi_dcs_enter_sleep_mode(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev, "failed to enter sleep mode: %d\n",
- ret);
+ dev_err(ctx->dev, "failed to enter sleep mode: %d\n", ret);
return ret;
}
@@ -177,17 +174,15 @@ static int xpp055c272_prepare(struct drm_panel *panel)
if (ctx->prepared)
return 0;
- DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
+ dev_dbg(ctx->dev, "Resetting the panel\n");
ret = regulator_enable(ctx->vci);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev,
- "Failed to enable vci supply: %d\n", ret);
+ dev_err(ctx->dev, "Failed to enable vci supply: %d\n", ret);
return ret;
}
ret = regulator_enable(ctx->iovcc);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev,
- "Failed to enable iovcc supply: %d\n", ret);
+ dev_err(ctx->dev, "Failed to enable iovcc supply: %d\n", ret);
goto disable_vci;
}
@@ -201,14 +196,13 @@ static int xpp055c272_prepare(struct drm_panel *panel)
ret = xpp055c272_init_sequence(ctx);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
- ret);
+ dev_err(ctx->dev, "Panel init sequence failed: %d\n", ret);
goto disable_iovcc;
}
ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
+ dev_err(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
goto disable_iovcc;
}
@@ -217,7 +211,7 @@ static int xpp055c272_prepare(struct drm_panel *panel)
ret = mipi_dsi_dcs_set_display_on(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(ctx->dev, "Failed to set display on: %d\n", ret);
+ dev_err(ctx->dev, "Failed to set display on: %d\n", ret);
goto disable_iovcc;
}
@@ -256,9 +250,9 @@ static int xpp055c272_get_modes(struct drm_panel *panel,
mode = drm_mode_duplicate(connector->dev, &default_mode);
if (!mode) {
- DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n",
- default_mode.hdisplay, default_mode.vdisplay,
- drm_mode_vrefresh(&default_mode));
+ dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n",
+ default_mode.hdisplay, default_mode.vdisplay,
+ drm_mode_vrefresh(&default_mode));
return -ENOMEM;
}
@@ -290,7 +284,7 @@ static int xpp055c272_probe(struct mipi_dsi_device *dsi)
ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
if (IS_ERR(ctx->reset_gpio)) {
- DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
+ dev_err(dev, "cannot get reset gpio\n");
return PTR_ERR(ctx->reset_gpio);
}
@@ -298,9 +292,7 @@ static int xpp055c272_probe(struct mipi_dsi_device *dsi)
if (IS_ERR(ctx->vci)) {
ret = PTR_ERR(ctx->vci);
if (ret != -EPROBE_DEFER)
- DRM_DEV_ERROR(dev,
- "Failed to request vci regulator: %d\n",
- ret);
+ dev_err(dev, "Failed to request vci regulator: %d\n", ret);
return ret;
}
@@ -308,9 +300,7 @@ static int xpp055c272_probe(struct mipi_dsi_device *dsi)
if (IS_ERR(ctx->iovcc)) {
ret = PTR_ERR(ctx->iovcc);
if (ret != -EPROBE_DEFER)
- DRM_DEV_ERROR(dev,
- "Failed to request iovcc regulator: %d\n",
- ret);
+ dev_err(dev, "Failed to request iovcc regulator: %d\n", ret);
return ret;
}
@@ -334,7 +324,7 @@ static int xpp055c272_probe(struct mipi_dsi_device *dsi)
ret = mipi_dsi_attach(dsi);
if (ret < 0) {
- DRM_DEV_ERROR(dev, "mipi_dsi_attach failed: %d\n", ret);
+ dev_err(dev, "mipi_dsi_attach failed: %d\n", ret);
drm_panel_remove(&ctx->panel);
return ret;
}
@@ -349,13 +339,11 @@ static void xpp055c272_shutdown(struct mipi_dsi_device *dsi)
ret = drm_panel_unprepare(&ctx->panel);
if (ret < 0)
- DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
- ret);
+ dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret);
ret = drm_panel_disable(&ctx->panel);
if (ret < 0)
- DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
- ret);
+ dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret);
}
static int xpp055c272_remove(struct mipi_dsi_device *dsi)
@@ -367,8 +355,7 @@ static int xpp055c272_remove(struct mipi_dsi_device *dsi)
ret = mipi_dsi_detach(dsi);
if (ret < 0)
- DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
- ret);
+ dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
drm_panel_remove(&ctx->panel);
--
2.25.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v1 1/5] drm/panel: samsung: Use dev_ based logging
2020-08-15 12:54 ` [PATCH v1 1/5] drm/panel: samsung: " Sam Ravnborg
@ 2020-08-15 19:23 ` Linus Walleij
2020-08-15 21:09 ` Sam Ravnborg
0 siblings, 1 reply; 10+ messages in thread
From: Linus Walleij @ 2020-08-15 19:23 UTC (permalink / raw)
To: Sam Ravnborg
Cc: Laurent Pinchart, David Airlie, Guido Günther, Jerry Han,
open list:DRM PANEL DRIVERS, Jani Nikula, Thierry Reding,
Jagan Teki, Robert Chiras, Icenowy Zheng
On Sat, Aug 15, 2020 at 2:54 PM Sam Ravnborg <sam@ravnborg.org> wrote:
> Standardize on the dev_ based logging and drop the include of drm_print.h.
> Fix a few cases where "x@" was used when printing the mode.
>
> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> Cc: Guido Günther <agx@sigxcpu.org>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
At one point I was told to not use dev_* but use DRM_DEV*
macros instead. "OK the DRM people want it this way, no
big deal." But I'd rather do it like this so:
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Yours,
Linus Walleij
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v1 1/5] drm/panel: samsung: Use dev_ based logging
2020-08-15 19:23 ` Linus Walleij
@ 2020-08-15 21:09 ` Sam Ravnborg
0 siblings, 0 replies; 10+ messages in thread
From: Sam Ravnborg @ 2020-08-15 21:09 UTC (permalink / raw)
To: Linus Walleij
Cc: Laurent Pinchart, David Airlie, Guido Günther, Jerry Han,
open list:DRM PANEL DRIVERS, Jani Nikula, Thierry Reding,
Jagan Teki, Robert Chiras, Icenowy Zheng
On Sat, Aug 15, 2020 at 09:23:59PM +0200, Linus Walleij wrote:
> On Sat, Aug 15, 2020 at 2:54 PM Sam Ravnborg <sam@ravnborg.org> wrote:
>
> > Standardize on the dev_ based logging and drop the include of drm_print.h.
> > Fix a few cases where "x@" was used when printing the mode.
> >
> > Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
> > Cc: Thierry Reding <thierry.reding@gmail.com>
> > Cc: Sam Ravnborg <sam@ravnborg.org>
> > Cc: Guido Günther <agx@sigxcpu.org>
> > Cc: Linus Walleij <linus.walleij@linaro.org>
> > Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
>
> At one point I was told to not use dev_* but use DRM_DEV*
> macros instead. "OK the DRM people want it this way, no
> big deal."
That could have been me, sorry!
> But I'd rather do it like this so:
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Thanks!
Sam
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v1 0/5] drm/panel: Use dev_ based logging
2020-08-15 12:54 [PATCH v1 0/5] drm/panel: Use dev_ based logging Sam Ravnborg
` (4 preceding siblings ...)
2020-08-15 12:54 ` [PATCH v1 5/5] drm/panel: " Sam Ravnborg
@ 2020-08-15 21:20 ` Guido Günther
2020-08-18 20:34 ` Sam Ravnborg
6 siblings, 0 replies; 10+ messages in thread
From: Guido Günther @ 2020-08-15 21:20 UTC (permalink / raw)
To: Sam Ravnborg
Cc: Laurent Pinchart, David Airlie, Jerry Han, dri-devel,
Jani Nikula, Thierry Reding, Jagan Teki, Robert Chiras,
Icenowy Zheng
Hi,
On Sat, Aug 15, 2020 at 02:54:01PM +0200, Sam Ravnborg wrote:
> The drm/panel drivers uses a mixture of DRM_ and dev_ based logging.
> With this patchset all panel drivers are migrated to use dev_ based
> logging as the DRM_ based logging did not add any extra info.
>
> Drop the now unused include of drm_print.h.
>
> With this change new panel drivers will be requires to change to dev_
> based logging - so some of the in-flight panel drivers will need trivial
> updates before they are accepted.
>
> Patch divided in smaller bites to ease review. There is no dependencies
> between the patches.
>
> Copied a few people that may have input to the move away from DRM_ based
> logging (Daniel (presumeably on vacation), Jani).
Looks good to me and after applying to next-20200824 i couldn't spot any
DRM_ style logging leftovers:
Reviewed-by: Guido Günther <agx@sigxcpu.org>
Cheers,
-- Guido
>
> Sam
>
> Sam Ravnborg (5):
> drm/panel: samsung: Use dev_ based logging
> drm/panel: leadtek: Use dev_ based logging
> drm/panel: raydium: Use dev_ based logging
> drm/panel: sitronix: Use dev_ based logging
> drm/panel: Use dev_ based logging
>
> drivers/gpu/drm/panel/panel-boe-himax8279d.c | 44 ++++--------
> drivers/gpu/drm/panel/panel-elida-kd35t133.c | 51 +++++---------
> drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c | 19 +++--
> .../gpu/drm/panel/panel-feiyang-fy07024di26a30d.c | 21 +++---
> drivers/gpu/drm/panel/panel-ilitek-ili9322.c | 3 +-
> drivers/gpu/drm/panel/panel-innolux-p079zca.c | 31 +++------
> drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c | 33 ++++-----
> drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c | 58 ++++++----------
> drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c | 49 +++++--------
> drivers/gpu/drm/panel/panel-novatek-nt35510.c | 40 ++++-------
> drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 13 ++--
> drivers/gpu/drm/panel/panel-raydium-rm67191.c | 33 ++++-----
> drivers/gpu/drm/panel/panel-raydium-rm68200.c | 18 +++--
> drivers/gpu/drm/panel/panel-ronbo-rb070d30.c | 16 ++---
> drivers/gpu/drm/panel/panel-samsung-ld9040.c | 3 +-
> drivers/gpu/drm/panel/panel-samsung-s6d16d0.c | 23 +++---
> drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c | 3 +-
> drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c | 3 +-
> drivers/gpu/drm/panel/panel-samsung-s6e63m0.c | 22 +++---
> drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c | 3 +-
> drivers/gpu/drm/panel/panel-sitronix-st7701.c | 10 ++-
> drivers/gpu/drm/panel/panel-sitronix-st7703.c | 61 ++++++----------
> drivers/gpu/drm/panel/panel-sony-acx424akp.c | 81 ++++++++--------------
> drivers/gpu/drm/panel/panel-tpo-tpg110.c | 38 +++++-----
> drivers/gpu/drm/panel/panel-truly-nt35597.c | 63 ++++++-----------
> drivers/gpu/drm/panel/panel-visionox-rm69299.c | 41 ++++-------
> drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c | 51 +++++---------
> 27 files changed, 308 insertions(+), 523 deletions(-)
>
>
>
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v1 0/5] drm/panel: Use dev_ based logging
2020-08-15 12:54 [PATCH v1 0/5] drm/panel: Use dev_ based logging Sam Ravnborg
` (5 preceding siblings ...)
2020-08-15 21:20 ` [PATCH v1 0/5] " Guido Günther
@ 2020-08-18 20:34 ` Sam Ravnborg
6 siblings, 0 replies; 10+ messages in thread
From: Sam Ravnborg @ 2020-08-18 20:34 UTC (permalink / raw)
To: dri-devel, Thierry Reding
Cc: David Airlie, Guido Günther, Jerry Han, Jani Nikula,
Laurent Pinchart, Robert Chiras, Icenowy Zheng, Jagan Teki
On Sat, Aug 15, 2020 at 02:54:01PM +0200, Sam Ravnborg wrote:
> The drm/panel drivers uses a mixture of DRM_ and dev_ based logging.
> With this patchset all panel drivers are migrated to use dev_ based
> logging as the DRM_ based logging did not add any extra info.
>
> Drop the now unused include of drm_print.h.
>
> With this change new panel drivers will be requires to change to dev_
> based logging - so some of the in-flight panel drivers will need trivial
> updates before they are accepted.
>
> Patch divided in smaller bites to ease review. There is no dependencies
> between the patches.
>
> Copied a few people that may have input to the move away from DRM_ based
> logging (Daniel (presumeably on vacation), Jani).
>
> Sam
>
> Sam Ravnborg (5):
> drm/panel: samsung: Use dev_ based logging
> drm/panel: leadtek: Use dev_ based logging
> drm/panel: raydium: Use dev_ based logging
> drm/panel: sitronix: Use dev_ based logging
> drm/panel: Use dev_ based logging
Thanks for the reviews from Linus and Guido.
Series is now applied to drm-misc-next.
Sam
>
> drivers/gpu/drm/panel/panel-boe-himax8279d.c | 44 ++++--------
> drivers/gpu/drm/panel/panel-elida-kd35t133.c | 51 +++++---------
> drivers/gpu/drm/panel/panel-feixin-k101-im2ba02.c | 19 +++--
> .../gpu/drm/panel/panel-feiyang-fy07024di26a30d.c | 21 +++---
> drivers/gpu/drm/panel/panel-ilitek-ili9322.c | 3 +-
> drivers/gpu/drm/panel/panel-innolux-p079zca.c | 31 +++------
> drivers/gpu/drm/panel/panel-kingdisplay-kd097d04.c | 33 ++++-----
> drivers/gpu/drm/panel/panel-leadtek-ltk050h3146w.c | 58 ++++++----------
> drivers/gpu/drm/panel/panel-leadtek-ltk500hd1829.c | 49 +++++--------
> drivers/gpu/drm/panel/panel-novatek-nt35510.c | 40 ++++-------
> drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 13 ++--
> drivers/gpu/drm/panel/panel-raydium-rm67191.c | 33 ++++-----
> drivers/gpu/drm/panel/panel-raydium-rm68200.c | 18 +++--
> drivers/gpu/drm/panel/panel-ronbo-rb070d30.c | 16 ++---
> drivers/gpu/drm/panel/panel-samsung-ld9040.c | 3 +-
> drivers/gpu/drm/panel/panel-samsung-s6d16d0.c | 23 +++---
> drivers/gpu/drm/panel/panel-samsung-s6e3ha2.c | 3 +-
> drivers/gpu/drm/panel/panel-samsung-s6e63j0x03.c | 3 +-
> drivers/gpu/drm/panel/panel-samsung-s6e63m0.c | 22 +++---
> drivers/gpu/drm/panel/panel-samsung-s6e8aa0.c | 3 +-
> drivers/gpu/drm/panel/panel-sitronix-st7701.c | 10 ++-
> drivers/gpu/drm/panel/panel-sitronix-st7703.c | 61 ++++++----------
> drivers/gpu/drm/panel/panel-sony-acx424akp.c | 81 ++++++++--------------
> drivers/gpu/drm/panel/panel-tpo-tpg110.c | 38 +++++-----
> drivers/gpu/drm/panel/panel-truly-nt35597.c | 63 ++++++-----------
> drivers/gpu/drm/panel/panel-visionox-rm69299.c | 41 ++++-------
> drivers/gpu/drm/panel/panel-xinpeng-xpp055c272.c | 51 +++++---------
> 27 files changed, 308 insertions(+), 523 deletions(-)
>
>
>
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-08-18 20:34 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-15 12:54 [PATCH v1 0/5] drm/panel: Use dev_ based logging Sam Ravnborg
2020-08-15 12:54 ` [PATCH v1 1/5] drm/panel: samsung: " Sam Ravnborg
2020-08-15 19:23 ` Linus Walleij
2020-08-15 21:09 ` Sam Ravnborg
2020-08-15 12:54 ` [PATCH v1 2/5] drm/panel: leadtek: " Sam Ravnborg
2020-08-15 12:54 ` [PATCH v1 3/5] drm/panel: raydium: " Sam Ravnborg
2020-08-15 12:54 ` [PATCH v1 4/5] drm/panel: sitronix: " Sam Ravnborg
2020-08-15 12:54 ` [PATCH v1 5/5] drm/panel: " Sam Ravnborg
2020-08-15 21:20 ` [PATCH v1 0/5] " Guido Günther
2020-08-18 20:34 ` Sam Ravnborg
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.