* [PATCH 0/3] dt-bindings: media: ov772x: Convert to json-schama
@ 2020-08-17 15:59 Jacopo Mondi
2020-08-17 15:59 ` [PATCH 1/3] dt-bindings: media: ov772x: Convert to json-schema Jacopo Mondi
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Jacopo Mondi @ 2020-08-17 15:59 UTC (permalink / raw)
To: robh+dt, devicetree, linux-media, Lad, Prabhakar
Cc: Jacopo Mondi, mchehab, sakari.ailus, hverkuil-cisco,
laurent.pinchart, linux-renesas-soc
Convert to json-schema the ov772x bindings and add support for endpoint
properties to pave the way for Prabhakar's support for BT.656 in the driver.
Prabhakar: could you confirm the properties defaults are sane according to your
setup?
Thanks
j
Jacopo Mondi (3):
dt-bindings: media: ov772x: Convert to json-schema
dt-bindings: media: ov772x: Make bus-type mandatory
dt-bindings: media: ov772x: Document endpoint props
.../devicetree/bindings/media/i2c/ov772x.txt | 40 ------
.../devicetree/bindings/media/i2c/ov772x.yaml | 134 ++++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 135 insertions(+), 41 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov772x.txt
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov772x.yaml
--
2.27.0
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 1/3] dt-bindings: media: ov772x: Convert to json-schema
2020-08-17 15:59 [PATCH 0/3] dt-bindings: media: ov772x: Convert to json-schama Jacopo Mondi
@ 2020-08-17 15:59 ` Jacopo Mondi
2020-08-17 15:59 ` [PATCH 2/3] dt-bindings: media: ov772x: Make bus-type mandatory Jacopo Mondi
2020-08-17 15:59 ` [PATCH 3/3] dt-bindings: media: ov772x: Document endpoint props Jacopo Mondi
2 siblings, 0 replies; 10+ messages in thread
From: Jacopo Mondi @ 2020-08-17 15:59 UTC (permalink / raw)
To: robh+dt, devicetree, linux-media, Lad, Prabhakar
Cc: Jacopo Mondi, mchehab, sakari.ailus, hverkuil-cisco,
laurent.pinchart, linux-renesas-soc
Convert the ov772x binding document to json-schema and update
the MAINTAINERS file accordingly.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
.../devicetree/bindings/media/i2c/ov772x.txt | 40 ---------
.../devicetree/bindings/media/i2c/ov772x.yaml | 84 +++++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 85 insertions(+), 41 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov772x.txt
create mode 100644 Documentation/devicetree/bindings/media/i2c/ov772x.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/ov772x.txt b/Documentation/devicetree/bindings/media/i2c/ov772x.txt
deleted file mode 100644
index 0b3ede5b8e6a..000000000000
--- a/Documentation/devicetree/bindings/media/i2c/ov772x.txt
+++ /dev/null
@@ -1,40 +0,0 @@
-* Omnivision OV7720/OV7725 CMOS sensor
-
-The Omnivision OV7720/OV7725 sensor supports multiple resolutions output,
-such as VGA, QVGA, and any size scaling down from CIF to 40x30. It also can
-support the YUV422, RGB565/555/444, GRB422 or raw RGB output formats.
-
-Required Properties:
-- compatible: shall be one of
- "ovti,ov7720"
- "ovti,ov7725"
-- clocks: reference to the xclk input clock.
-
-Optional Properties:
-- reset-gpios: reference to the GPIO connected to the RSTB pin which is
- active low, if any.
-- powerdown-gpios: reference to the GPIO connected to the PWDN pin which is
- active high, if any.
-
-The device node shall contain one 'port' child node with one child 'endpoint'
-subnode for its digital output video port, in accordance with the video
-interface bindings defined in Documentation/devicetree/bindings/media/
-video-interfaces.txt.
-
-Example:
-
-&i2c0 {
- ov772x: camera@21 {
- compatible = "ovti,ov7725";
- reg = <0x21>;
- reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_LOW>;
- powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_LOW>;
- clocks = <&xclk>;
-
- port {
- ov772x_0: endpoint {
- remote-endpoint = <&vcap1_in0>;
- };
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/media/i2c/ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
new file mode 100644
index 000000000000..2b84fefeb4aa
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ov772x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV7720/OV7725 CMOS sensor
+
+maintainers:
+ - Jacopo Mondi <jacopo@jmondi.org>
+
+description: -|
+ The Omnivision OV7720/OV7725 sensor supports multiple resolutions output,
+ such as VGA, QVGA, and any size scaling down from CIF to 40x30. It also can
+ support the YUV422, RGB565/555/444, GRB422 or raw RGB output formats.
+
+properties:
+ compatible:
+ enum:
+ - ovti,ov7720
+ - ovti,ov7725
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ reset-gpios:
+ description: -|
+ Reference to the GPIO connected to the RSTB pin which is active low.
+ maxItems: 1
+
+ powerdown-gpios:
+ description: -|
+ Reference to the GPIO connected to the PWDN pin which is active high.
+ maxItems: 1
+
+ port:
+ type: object
+ description: |
+ The device node must contain one 'port' child node for its digital output
+ video port, in accordance with the video interface bindings defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+
+ properties:
+ endpoint:
+ type: object
+ properties:
+ remote-endpoint:
+ description: A phandle to the bus receiver's endpoint node.
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - reset-gpios
+ - powerdown-gpios
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ov772x: camera@21 {
+ compatible = "ovti,ov7725";
+ reg = <0x21>;
+ reset-gpios = <&axi_gpio_0 0 GPIO_ACTIVE_LOW>;
+ powerdown-gpios = <&axi_gpio_0 1 GPIO_ACTIVE_LOW>;
+ clocks = <&xclk>;
+
+ port {
+ ov772x_0: endpoint {
+ remote-endpoint = <&vcap1_in0>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index d1a6173d3b64..d0a20214eaaf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -12666,7 +12666,7 @@ M: Jacopo Mondi <jacopo@jmondi.org>
L: linux-media@vger.kernel.org
S: Odd fixes
T: git git://linuxtv.org/media_tree.git
-F: Documentation/devicetree/bindings/media/i2c/ov772x.txt
+F: Documentation/devicetree/bindings/media/i2c/ov772x.yaml
F: drivers/media/i2c/ov772x.c
F: include/media/i2c/ov772x.h
--
2.27.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/3] dt-bindings: media: ov772x: Make bus-type mandatory
2020-08-17 15:59 [PATCH 0/3] dt-bindings: media: ov772x: Convert to json-schama Jacopo Mondi
2020-08-17 15:59 ` [PATCH 1/3] dt-bindings: media: ov772x: Convert to json-schema Jacopo Mondi
@ 2020-08-17 15:59 ` Jacopo Mondi
2020-08-17 20:14 ` Sergei Shtylyov
2020-08-17 15:59 ` [PATCH 3/3] dt-bindings: media: ov772x: Document endpoint props Jacopo Mondi
2 siblings, 1 reply; 10+ messages in thread
From: Jacopo Mondi @ 2020-08-17 15:59 UTC (permalink / raw)
To: robh+dt, devicetree, linux-media, Lad, Prabhakar
Cc: Jacopo Mondi, mchehab, sakari.ailus, hverkuil-cisco,
laurent.pinchart, linux-renesas-soc
In order to establish required properties based on the selected
bus type, make the 'bus-type' property mandatory.
Binary compatibility with existing DTB is kept as the driver does not
enforce the property to be present, and shall fall-back to default
parallel bus configuration, which was the only supported bus type, if
the property is not specified.
---
Documentation/devicetree/bindings/media/i2c/ov772x.yaml | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/i2c/ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
index 2b84fefeb4aa..75dad40f70cc 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
@@ -47,9 +47,15 @@ properties:
endpoint:
type: object
properties:
+ bus-type:
+ enum: [5, 6]
+
remote-endpoint:
description: A phandle to the bus receiver's endpoint node.
+ required:
+ - bus-type
+
additionalProperties: false
required:
@@ -75,6 +81,7 @@ examples:
port {
ov772x_0: endpoint {
+ bus-type = <5>;
remote-endpoint = <&vcap1_in0>;
};
};
--
2.27.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 3/3] dt-bindings: media: ov772x: Document endpoint props
2020-08-17 15:59 [PATCH 0/3] dt-bindings: media: ov772x: Convert to json-schama Jacopo Mondi
2020-08-17 15:59 ` [PATCH 1/3] dt-bindings: media: ov772x: Convert to json-schema Jacopo Mondi
2020-08-17 15:59 ` [PATCH 2/3] dt-bindings: media: ov772x: Make bus-type mandatory Jacopo Mondi
@ 2020-08-17 15:59 ` Jacopo Mondi
2 siblings, 0 replies; 10+ messages in thread
From: Jacopo Mondi @ 2020-08-17 15:59 UTC (permalink / raw)
To: robh+dt, devicetree, linux-media, Lad, Prabhakar
Cc: Jacopo Mondi, mchehab, sakari.ailus, hverkuil-cisco,
laurent.pinchart, linux-renesas-soc
Document endpoint properties for the parallel bus type and
add them to the example.
Specify a few constraints:
- If the bus type is BT.656 no hsync or vsycn polarities can be
specified.
- If the bus width is 10 bits, not data-shift can be applied.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
.../devicetree/bindings/media/i2c/ov772x.yaml | 43 +++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/i2c/ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
index 75dad40f70cc..3fad5dffd19a 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
@@ -50,9 +50,47 @@ properties:
bus-type:
enum: [5, 6]
+ bus-width:
+ enum: [8, 10]
+ default: 10
+
+ data-shift:
+ enum: [0, 2]
+ default: 0
+
+ hsync-active:
+ enum: [0, 1]
+ default: 1
+
+ vsync-active:
+ enum: [0, 1]
+ default: 1
+
+ pclk-sample:
+ enum: [0, 1]
+ default: 1
+
remote-endpoint:
description: A phandle to the bus receiver's endpoint node.
+ allOf:
+ - if:
+ properties:
+ bus-type:
+ const: 6
+ then:
+ properties:
+ hsync-active: false
+ vsync-active: false
+
+ - if:
+ properties:
+ bus-width:
+ const: 10
+ then:
+ properties:
+ data-shift:
+ const: 0
required:
- bus-type
@@ -82,6 +120,11 @@ examples:
port {
ov772x_0: endpoint {
bus-type = <5>;
+ vsync-active = <0>;
+ hsync-active = <0>;
+ pclk-sample = <0>;
+ bus-width = <8>;
+ data-shift = <0>;
remote-endpoint = <&vcap1_in0>;
};
};
--
2.27.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH 2/3] dt-bindings: media: ov772x: Make bus-type mandatory
2020-08-17 15:59 ` [PATCH 2/3] dt-bindings: media: ov772x: Make bus-type mandatory Jacopo Mondi
@ 2020-08-17 20:14 ` Sergei Shtylyov
2020-08-18 12:06 ` Jacopo Mondi
0 siblings, 1 reply; 10+ messages in thread
From: Sergei Shtylyov @ 2020-08-17 20:14 UTC (permalink / raw)
To: Jacopo Mondi, robh+dt, devicetree, linux-media, Lad, Prabhakar
Cc: mchehab, sakari.ailus, hverkuil-cisco, laurent.pinchart,
linux-renesas-soc
On 8/17/20 6:59 PM, Jacopo Mondi wrote:
> In order to establish required properties based on the selected
> bus type, make the 'bus-type' property mandatory.
>
> Binary compatibility with existing DTB is kept as the driver does not
> enforce the property to be present, and shall fall-back to default
> parallel bus configuration, which was the only supported bus type, if
> the property is not specified.
Signed-off-by?
[...]
MBR, Sergei
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 2/3] dt-bindings: media: ov772x: Make bus-type mandatory
2020-08-17 20:14 ` Sergei Shtylyov
@ 2020-08-18 12:06 ` Jacopo Mondi
0 siblings, 0 replies; 10+ messages in thread
From: Jacopo Mondi @ 2020-08-18 12:06 UTC (permalink / raw)
To: Sergei Shtylyov
Cc: Jacopo Mondi, robh+dt, devicetree, linux-media, Lad, Prabhakar,
mchehab, sakari.ailus, hverkuil-cisco, laurent.pinchart,
linux-renesas-soc
Hi Sergei
On Mon, Aug 17, 2020 at 11:14:04PM +0300, Sergei Shtylyov wrote:
> On 8/17/20 6:59 PM, Jacopo Mondi wrote:
>
> > In order to establish required properties based on the selected
> > bus type, make the 'bus-type' property mandatory.
> >
> > Binary compatibility with existing DTB is kept as the driver does not
> > enforce the property to be present, and shall fall-back to default
> > parallel bus configuration, which was the only supported bus type, if
> > the property is not specified.
>
> Signed-off-by?
>
Who didn't run checkpatch on this binding path: o/
Will re-send, sorry for the fuss
> [...]
>
> MBR, Sergei
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 2/3] dt-bindings: media: ov772x: Make bus-type mandatory
2020-08-18 12:20 ` [PATCH 2/3] dt-bindings: media: ov772x: Make bus-type mandatory Jacopo Mondi
2020-08-19 13:52 ` Laurent Pinchart
2020-08-21 11:29 ` Lad, Prabhakar
@ 2020-08-25 21:06 ` Rob Herring
2 siblings, 0 replies; 10+ messages in thread
From: Rob Herring @ 2020-08-25 21:06 UTC (permalink / raw)
To: Jacopo Mondi
Cc: robh+dt, devicetree, Lad, Prabhakar, linux-renesas-soc,
sakari.ailus, mchehab, linux-media, hverkuil-cisco,
laurent.pinchart
On Tue, 18 Aug 2020 14:20:11 +0200, Jacopo Mondi wrote:
> In order to establish required properties based on the selected
> bus type, make the 'bus-type' property mandatory.
>
> Binary compatibility with existing DTB is kept as the driver does not
> enforce the property to be present, and shall fall-back to default
> parallel bus configuration, which was the only supported bus type, if
> the property is not specified.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
> Documentation/devicetree/bindings/media/i2c/ov772x.yaml | 7 +++++++
> 1 file changed, 7 insertions(+)
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 2/3] dt-bindings: media: ov772x: Make bus-type mandatory
2020-08-18 12:20 ` [PATCH 2/3] dt-bindings: media: ov772x: Make bus-type mandatory Jacopo Mondi
2020-08-19 13:52 ` Laurent Pinchart
@ 2020-08-21 11:29 ` Lad, Prabhakar
2020-08-25 21:06 ` Rob Herring
2 siblings, 0 replies; 10+ messages in thread
From: Lad, Prabhakar @ 2020-08-21 11:29 UTC (permalink / raw)
To: Jacopo Mondi
Cc: Rob Herring,
open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS,
linux-media, Mauro Carvalho Chehab, Sakari Ailus, Hans Verkuil,
Laurent Pinchart, Linux-Renesas
Hi Jacopo,
Thank you for the patch.
On Tue, Aug 18, 2020 at 1:16 PM Jacopo Mondi <jacopo+renesas@jmondi.org> wrote:
>
> In order to establish required properties based on the selected
> bus type, make the 'bus-type' property mandatory.
>
> Binary compatibility with existing DTB is kept as the driver does not
> enforce the property to be present, and shall fall-back to default
> parallel bus configuration, which was the only supported bus type, if
> the property is not specified.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
> Documentation/devicetree/bindings/media/i2c/ov772x.yaml | 7 +++++++
> 1 file changed, 7 insertions(+)
>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Cheers,
Prabhakar
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
> index 2b84fefeb4aa..75dad40f70cc 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
> @@ -47,9 +47,15 @@ properties:
> endpoint:
> type: object
> properties:
> + bus-type:
> + enum: [5, 6]
> +
> remote-endpoint:
> description: A phandle to the bus receiver's endpoint node.
>
> + required:
> + - bus-type
> +
> additionalProperties: false
>
> required:
> @@ -75,6 +81,7 @@ examples:
>
> port {
> ov772x_0: endpoint {
> + bus-type = <5>;
> remote-endpoint = <&vcap1_in0>;
> };
> };
> --
> 2.27.0
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 2/3] dt-bindings: media: ov772x: Make bus-type mandatory
2020-08-18 12:20 ` [PATCH 2/3] dt-bindings: media: ov772x: Make bus-type mandatory Jacopo Mondi
@ 2020-08-19 13:52 ` Laurent Pinchart
2020-08-21 11:29 ` Lad, Prabhakar
2020-08-25 21:06 ` Rob Herring
2 siblings, 0 replies; 10+ messages in thread
From: Laurent Pinchart @ 2020-08-19 13:52 UTC (permalink / raw)
To: Jacopo Mondi
Cc: robh+dt, devicetree, linux-media, Lad, Prabhakar, mchehab,
sakari.ailus, hverkuil-cisco, linux-renesas-soc
Hi Jacopo,
Thank you for the patch.
On Tue, Aug 18, 2020 at 02:20:11PM +0200, Jacopo Mondi wrote:
> In order to establish required properties based on the selected
> bus type, make the 'bus-type' property mandatory.
>
> Binary compatibility with existing DTB is kept as the driver does not
> enforce the property to be present, and shall fall-back to default
> parallel bus configuration, which was the only supported bus type, if
> the property is not specified.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> ---
> Documentation/devicetree/bindings/media/i2c/ov772x.yaml | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
> index 2b84fefeb4aa..75dad40f70cc 100644
> --- a/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
> +++ b/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
> @@ -47,9 +47,15 @@ properties:
> endpoint:
> type: object
> properties:
> + bus-type:
> + enum: [5, 6]
> +
> remote-endpoint:
> description: A phandle to the bus receiver's endpoint node.
>
> + required:
> + - bus-type
> +
> additionalProperties: false
>
> required:
> @@ -75,6 +81,7 @@ examples:
>
> port {
> ov772x_0: endpoint {
> + bus-type = <5>;
> remote-endpoint = <&vcap1_in0>;
> };
> };
--
Regards,
Laurent Pinchart
^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 2/3] dt-bindings: media: ov772x: Make bus-type mandatory
2020-08-18 12:20 [PATCH 0/3] dt-bindings: media: ov772x: Convert to json-schama Jacopo Mondi
@ 2020-08-18 12:20 ` Jacopo Mondi
2020-08-19 13:52 ` Laurent Pinchart
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Jacopo Mondi @ 2020-08-18 12:20 UTC (permalink / raw)
To: robh+dt, devicetree, linux-media, Lad, Prabhakar
Cc: Jacopo Mondi, mchehab, sakari.ailus, hverkuil-cisco,
laurent.pinchart, linux-renesas-soc
In order to establish required properties based on the selected
bus type, make the 'bus-type' property mandatory.
Binary compatibility with existing DTB is kept as the driver does not
enforce the property to be present, and shall fall-back to default
parallel bus configuration, which was the only supported bus type, if
the property is not specified.
Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
Documentation/devicetree/bindings/media/i2c/ov772x.yaml | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/i2c/ov772x.yaml b/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
index 2b84fefeb4aa..75dad40f70cc 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/ov772x.yaml
@@ -47,9 +47,15 @@ properties:
endpoint:
type: object
properties:
+ bus-type:
+ enum: [5, 6]
+
remote-endpoint:
description: A phandle to the bus receiver's endpoint node.
+ required:
+ - bus-type
+
additionalProperties: false
required:
@@ -75,6 +81,7 @@ examples:
port {
ov772x_0: endpoint {
+ bus-type = <5>;
remote-endpoint = <&vcap1_in0>;
};
};
--
2.27.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-08-25 21:06 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-17 15:59 [PATCH 0/3] dt-bindings: media: ov772x: Convert to json-schama Jacopo Mondi
2020-08-17 15:59 ` [PATCH 1/3] dt-bindings: media: ov772x: Convert to json-schema Jacopo Mondi
2020-08-17 15:59 ` [PATCH 2/3] dt-bindings: media: ov772x: Make bus-type mandatory Jacopo Mondi
2020-08-17 20:14 ` Sergei Shtylyov
2020-08-18 12:06 ` Jacopo Mondi
2020-08-17 15:59 ` [PATCH 3/3] dt-bindings: media: ov772x: Document endpoint props Jacopo Mondi
2020-08-18 12:20 [PATCH 0/3] dt-bindings: media: ov772x: Convert to json-schama Jacopo Mondi
2020-08-18 12:20 ` [PATCH 2/3] dt-bindings: media: ov772x: Make bus-type mandatory Jacopo Mondi
2020-08-19 13:52 ` Laurent Pinchart
2020-08-21 11:29 ` Lad, Prabhakar
2020-08-25 21:06 ` Rob Herring
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.