Re: [PATCH 49/49] dt: display: Add binds for the DPE and DSI controller for Kirin 960/970

[Sam Ravnborg <sam@ravnborg.org>]

Hi Mauro.

Some feedback in the following.
Good to see DT schma files and not .txt files - but needs a bit more
work.

	Sam

On Wed, Aug 19, 2020 at 01:46:17PM +0200, Mauro Carvalho Chehab wrote:
> Add a description of the bindings used by Kirin 960/970 Display
> Serial Interface (DSI) controller and by its Display Engine (DPE).
> 
> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> ---
>  .../display/hisilicon,hi3660-dpe.yaml         |  99 +++++++++++++++++
>  .../display/hisilicon,hi3660-dsi.yaml         | 102 ++++++++++++++++++
>  .../boot/dts/hisilicon/hikey970-drm.dtsi      |   4 +-
>  3 files changed, 203 insertions(+), 2 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/display/hisilicon,hi3660-dpe.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/hisilicon,hi3660-dsi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/hisilicon,hi3660-dpe.yaml b/Documentation/devicetree/bindings/display/hisilicon,hi3660-dpe.yaml
> new file mode 100644
> index 000000000000..074997354417
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/hisilicon,hi3660-dpe.yaml
> @@ -0,0 +1,99 @@
> +# SPDX-License-Identifier: GPL-2.0
New bindings should be dual licensed if poossible.

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/hisilicon,hi3660-dpe.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HiSilicon SPMI controller
> +
> +maintainers:
> +  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> +
> +description: |
> +  The HiSilicon Display Engine (DPE) s the display controller which grab
s/s/is/
> +  image data from memory, do composition, do post image processing,
> +  generate RGB timing stream and transfer to DSI.
> +
> +properties:
> +  $nodename:
> +    pattern: "dpe@[0-9a-f]+"
compatible will match, no need for the nodename.

> +
> +  compatible:
> +    enum:
> +      - hisilicon,kirin960-dpe
> +      - hisilicon,kirin970-dpe
> +
> +  reg:
> +    minItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 1
> +    description: Clocks used by the ISP and by the display
All clocks must be described.
> +
> +  clock-names:
> +    description: Names for the clock lines
Specify clock names here.

> +
> +  dma-coherent: true
> +
> +  port:
> +    type: object
> +    description: A port node pointing to the display output endpoint.
> +
> +
> +  iommu-info:
> +    type: object
> +    description: IOMMU address and size to be used by GPU
> +
> +    properties:
> +      start-addr:
> +        const: start address for IOMMU
> +      size:
> +        const: size of the mapped region

additionalProperties: false?
- So a DT do not use undocumented properties.

required:?
- So a DT always includes the mandatory properties

> +
> +examples:
> +  - |
> +    dpe: dpe@e8600000 {
> +      compatible = "hisilicon,kirin970-dpe";
> +      memory-region = <&drm_dma_reserved>;
memory-region not included in the binding.
> +      reg = <0 0xE8600000 0 0xC0000>,
> +            <0 0xFFF35000 0 0x1000>,
> +            <0 0xFFF0A000 0 0x1000>,
> +            <0 0xE8A09000 0 0x1000>,
> +            <0 0xE86C0000 0 0x10000>,
> +            <0 0xFFF31000 0 0x1000>,
> +            <0 0xE87FF000 0 0x1000>;
> +
> +      interrupts = <0 245 4>;
> +
> +      clocks = <&media1_crg HI3670_ACLK_GATE_DSS>,
> +               <&media1_crg HI3670_PCLK_GATE_DSS>,
> +               <&media1_crg HI3670_CLK_GATE_EDC0>,
> +               <&media1_crg HI3670_CLK_GATE_LDI0>,
> +               <&media1_crg HI3670_CLK_GATE_DSS_AXI_MM>,
> +               <&media1_crg HI3670_PCLK_GATE_MMBUF>,
> +               <&crg_ctrl   HI3670_PCLK_GATE_PCTRL>;
The validation will fail as HI3670_PCLK_GATE_PCTRL is unknown.
Include the relevant header.
Use make dt_binding_check to validate the binding files.

> +
> +      clock-names = "aclk_dss",
> +                    "pclk_dss",
> +                    "clk_edc0",
> +                    "clk_ldi0",
> +                    "clk_dss_axi_mm",
> +                    "pclk_mmbuf",
> +                    "pclk_pctrl";
> +
> +      dma-coherent;
> +
> +      port {
> +        dpe_out: endpoint {
> +          remote-endpoint = <&dsi_in>;
> +        };
> +      };
> +
> +      iommu_info {
> +        start-addr = <0x8000>;
> +        size = <0xbfff8000>;
> +      };
> +    };
End file with:
<empty line>
...

> diff --git a/Documentation/devicetree/bindings/display/hisilicon,hi3660-dsi.yaml b/Documentation/devicetree/bindings/display/hisilicon,hi3660-dsi.yaml
> new file mode 100644
> index 000000000000..2265267fc53d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/hisilicon,hi3660-dsi.yaml
> @@ -0,0 +1,102 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/hisilicon,hi3660-dsi.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HiSilicon SPMI controller
> +
> +maintainers:
> +  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
> +
> +description: |
> +  The HiSilicon Display Serial Interface (DSI) Host Controller for
> +  Kirin 960 and 970 resides in the middle of display controller and
> +  an external HDMI converter or panel.
> +
> +properties:
> +  $nodename:
> +    pattern: "dsi@[0-9a-f]+"
Same comment as before.

> +
> +  compatible:
> +    enum:
> +      - hisilicon,kirin960-dsi
> +      - hisilicon,kirin970-dsi
> +
> +  reg:
> +    minItems: 1
> +    maxItems: 4
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 8
> +    description: Clocks used by the ISP and by the display.
> +
> +  clock-names:
> +    description: Names for the clock lines.
Add the names.

> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +  mux-gpio:
> +    description: GPIO used by the mux.
Must be named mux-gpios - added 's' even with a single gpio.
> +
> +  ports:
> +    type: object
> +    description: Display input and output ports.
> +
> +examples:
> +  - |
> +    dsi: dsi@e8601000 {
> +      compatible = "hisilicon,kirin970-dsi";
> +      reg = <0 0xE8601000 0 0x7F000>,
> +        <0 0xFFF35000 0 0x1000>,
> +        <0 0xE8A09000 0 0x1000>;
> +
> +      clocks = <&crg_ctrl HI3670_CLK_GATE_TXDPHY0_REF>,
> +        <&crg_ctrl HI3670_CLK_GATE_TXDPHY1_REF>,
> +        <&crg_ctrl HI3670_CLK_GATE_TXDPHY0_CFG>,
> +        <&crg_ctrl HI3670_CLK_GATE_TXDPHY1_CFG>,
> +        <&crg_ctrl HI3670_PCLK_GATE_DSI0>,
> +        <&crg_ctrl HI3670_PCLK_GATE_DSI1>;
> +      clock-names = "clk_txdphy0_ref",
> +            "clk_txdphy1_ref",
> +            "clk_txdphy0_cfg",
> +            "clk_txdphy1_cfg",
> +            "pclk_dsi0",
> +            "pclk_dsi1";
> +
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      mux-gpio = <&gpio25 7 0>;
> +
> +      ports {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        port@0 {
> +          reg = <0>;
> +          dsi_in: endpoint {
> +            remote-endpoint = <&dpe_out>;
> +          };
> +        };
> +
> +        port@1 {
> +          #address-cells = <1>;
> +          #size-cells = <0>;
> +          reg = <1>;
> +
> +          dsi_out0: endpoint@0 {
> +            reg = <0>;
> +            remote-endpoint = <&adv7533_in>;
> +          };
> +
> +          dsi_out1: endpoint@1 {
> +            reg = <1>;
> +            remote-endpoint = <&panel0_in>;
> +          };
> +        };
> +      };
> diff --git a/arch/arm64/boot/dts/hisilicon/hikey970-drm.dtsi b/arch/arm64/boot/dts/hisilicon/hikey970-drm.dtsi
> index 503c7c9425c8..5758d7d181e5 100644
> --- a/arch/arm64/boot/dts/hisilicon/hikey970-drm.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hikey970-drm.dtsi
> @@ -1,6 +1,6 @@
>  // SPDX-License-Identifier: GPL-2.0
>  / {
> -	dpe: dpe@E8600000 {
> +	dpe: dpe@e8600000 {
>  		compatible = "hisilicon,kirin970-dpe";
>  		memory-region = <&drm_dma_reserved>;
>  		// DSS, PERI_CRG, SCTRL, PCTRL, NOC_DSS_Service_Target, PMCTRL, MEDIA_CRG
> @@ -44,7 +44,7 @@ iommu_info {
>  		};
>  	};
>  
> -	dsi: dsi@E8601000 {
> +	dsi: dsi@e8601000 {
>  		compatible = "hisilicon,kirin970-dsi";
>  		reg = <0 0xE8601000 0 0x7F000>,
>  			<0 0xFFF35000 0 0x1000>,
> -- 
> 2.26.2
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel@lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel