All of lore.kernel.org
 help / color / mirror / Atom feed
* [BUG] Regression in Linux 5.4.17 for JMicron JMS566 enclosure
@ 2020-04-15 20:56 Cyril Roelandt
  2020-04-16  1:21 ` Alan Stern
  0 siblings, 1 reply; 23+ messages in thread
From: Cyril Roelandt @ 2020-04-15 20:56 UTC (permalink / raw)
  To: linux-usb; +Cc: sellis, pachoramos, labbott, gregkh

Hello,

I own a WD Blue 1TB hard drive that I use in combination with an Icy Box
IB-273StU3-B enclosure in order to plug it to my laptop using USB. It
worked fine with all the Linux versions I tried, up until 5.4.17.


Using Linux 5.3
---------------
Everything works as expected when I plug the drive, and I can mount the
partitions:

# dmesg -T
[Sun Mar 22 23:48:39 2020] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[Sun Mar 22 23:48:39 2020] usb 2-2: New USB device found, idVendor=357d, idProduct=7788, bcdDevice= 1.14
[Sun Mar 22 23:48:39 2020] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[Sun Mar 22 23:48:39 2020] usb 2-2: Product: USB to ATA/ATAPI Bridge
[Sun Mar 22 23:48:39 2020] usb 2-2: Manufacturer: JMicron
[Sun Mar 22 23:48:39 2020] usb 2-2: SerialNumber: 74D7851513309E5
[Sun Mar 22 23:48:39 2020] usbcore: registered new interface driver usb-storage
[Sun Mar 22 23:48:39 2020] scsi host6: uas
[Sun Mar 22 23:48:39 2020] usbcore: registered new interface driver uas
[Sun Mar 22 23:48:39 2020] scsi 6:0:0:0: Direct-Access     WDC WD10 JPVT-00A1YT0     0114 PQ: 0 ANSI: 6
[Sun Mar 22 23:48:39 2020] sd 6:0:0:0: Attached scsi generic sg1 type 0
[Sun Mar 22 23:48:39 2020] sd 6:0:0:0: [sdb] Spinning up disk...
[Sun Mar 22 23:48:40 2020] ..ready
[Sun Mar 22 23:48:41 2020] sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[Sun Mar 22 23:48:41 2020] sd 6:0:0:0: [sdb] 4096-byte physical blocks
[Sun Mar 22 23:48:41 2020] sd 6:0:0:0: [sdb] Write Protect is off
[Sun Mar 22 23:48:41 2020] sd 6:0:0:0: [sdb] Mode Sense: 53 00 10 08
[Sun Mar 22 23:48:41 2020] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[Sun Mar 22 23:48:41 2020] sd 6:0:0:0: [sdb] Optimal transfer size 33553920 bytes not a multiple of physical block size (4096 bytes)
[Sun Mar 22 23:48:41 2020]  sdb: sdb1
[Sun Mar 22 23:48:41 2020] sd 6:0:0:0: [sdb] Attached SCSI disk


Using Linux 5.4
---------------

# uname -a
Linux Susan 5.4.0-4-amd64 #1 SMP Debian 5.4.19-1 (2020-02-13) x86_64 GNU/Linux

# mkdir /tmp/mnt

# mount /dev/sdb1 /tmp/mnt
mount: /tmp/mnt: can't read superblock on /dev/sdb1.

# fsck -y /dev/sdb1
fsck from util-linux 2.34
e2fsck 1.45.6 (20-Mar-2020)
/dev/sdb1: clean, 2951657/61054976 files, 115035523/244190208 blocks

# dmesg -T 
[Mon Mar 23 18:43:06 2020] usb 3-2: new SuperSpeed Gen 1 USB device number 8 using xhci_hcd
[Mon Mar 23 18:43:06 2020] usb 3-2: New USB device found, idVendor=357d, idProduct=7788, bcdDevice= 1.14
[Mon Mar 23 18:43:06 2020] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[Mon Mar 23 18:43:06 2020] usb 3-2: Product: USB to ATA/ATAPI Bridge
[Mon Mar 23 18:43:06 2020] usb 3-2: Manufacturer: JMicron
[Mon Mar 23 18:43:06 2020] usb 3-2: SerialNumber: 74D7851513309E5
[Mon Mar 23 18:43:06 2020] usb 3-2: UAS is blacklisted for this device, using usb-storage instead
[Mon Mar 23 18:43:06 2020] usb-storage 3-2:1.0: USB Mass Storage device detected
[Mon Mar 23 18:43:06 2020] usb-storage 3-2:1.0: Quirks match for vid 357d pid 7788: 4800000
[Mon Mar 23 18:43:06 2020] scsi host6: usb-storage 3-2:1.0
[Mon Mar 23 18:43:07 2020] scsi 6:0:0:0: Direct-Access     WDC WD10 JPVT-00A1YT0     0114 PQ: 0 ANSI: 6
[Mon Mar 23 18:43:07 2020] sd 6:0:0:0: Attached scsi generic sg1 type 0
[Mon Mar 23 18:43:07 2020] sd 6:0:0:0: [sdb] Spinning up disk...
[Mon Mar 23 18:43:08 2020] ..ready
[Mon Mar 23 18:43:09 2020] sd 6:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[Mon Mar 23 18:43:09 2020] sd 6:0:0:0: [sdb] Write Protect is off
[Mon Mar 23 18:43:09 2020] sd 6:0:0:0: [sdb] Mode Sense: 47 00 10 08
[Mon Mar 23 18:43:09 2020] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[Mon Mar 23 18:43:09 2020]  sdb: sdb1
[Mon Mar 23 18:43:09 2020] sd 6:0:0:0: [sdb] Attached SCSI disk
[Mon Mar 23 18:43:30 2020] sd 6:0:0:0: [sdb] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[Mon Mar 23 18:43:30 2020] sd 6:0:0:0: [sdb] tag#0 Sense Key : Illegal Request [current] 
[Mon Mar 23 18:43:30 2020] sd 6:0:0:0: [sdb] tag#0 Add. Sense: Invalid field in cdb
[Mon Mar 23 18:43:30 2020] sd 6:0:0:0: [sdb] tag#0 CDB: Write(10) 2a 08 00 00 08 00 00 00 08 00
[Mon Mar 23 18:43:30 2020] blk_update_request: critical target error, dev sdb, sector 2048 op 0x1:(WRITE) flags 0x20800 phys_seg 1 prio class 0
[Mon Mar 23 18:43:30 2020] Buffer I/O error on dev sdb1, logical block 0, lost sync page write
[Mon Mar 23 18:43:30 2020] EXT4-fs (sdb1): I/O error while writing superblock
[Mon Mar 23 18:43:30 2020] EXT4-fs (sdb1): mount failed

# lsusb 
Bus 003 Device 008: ID 357d:7788 Sharkoon QuickPort XT


Other considerations
--------------------
This enclosure works as expected with another drive: I tried with an old
Fujitsu 250GB drive and was able to mount the partitions.

The WD drive works with a similar enclosure: the Icy Box IB-268U3-B
enclosure. It has the exact same vendor id and product id (357d:7788)
but a different bcdDevice (2.03).

Looking at the dmesg logs I pasted above, I see that the main difference
is the driver used:
- uas in Linux 5.3;
- usb-storage in Linux 5.4, since uas is blacklisted.


I believe the uas driver was blacklisted because of an old bug[1] in
Fedora. In Linux, the commit that disabled uas is
bc3bdb12bbb3492067c8719011576370e959a2e6.

I do not really mind not being able to use uas, however I would like to
be able to mount my partitions using usb-storage.


Regards,
Cyril Roelandt


[1] https://bugzilla.redhat.com/show_bug.cgi?id=1260207

^ permalink raw reply	[flat|nested] 23+ messages in thread

end of thread, other threads:[~2020-08-25 21:22 UTC | newest]

Thread overview: 23+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-04-15 20:56 [BUG] Regression in Linux 5.4.17 for JMicron JMS566 enclosure Cyril Roelandt
2020-04-16  1:21 ` Alan Stern
     [not found]   ` <CABLbxQ2Hoq8zt--w2FwuMa6FRCC72E5a-tvGRQOm=C0YF7bfqA@mail.gmail.com>
2020-04-16 14:43     ` Pacho Ramos
2020-04-17 18:32   ` Cyril Roelandt
2020-04-17 20:06     ` Alan Stern
2020-04-17 22:09       ` Cyril Roelandt
2020-04-19 16:03         ` Alan Stern
2020-04-21  3:01           ` Cyril Roelandt
2020-04-21 13:58             ` Alan Stern
2020-08-15  0:18             ` Cyril Roelandt
2020-08-15  2:19               ` Alan Stern
2020-08-15 23:23                 ` Cyril Roelandt
2020-08-16 16:26                   ` Alan Stern
2020-08-18  4:13                     ` Cyril Roelandt
2020-08-18 14:57                       ` Alan Stern
2020-08-23  1:30                         ` Cyril Roelandt
2020-08-23 14:47                           ` Alan Stern
2020-08-23 18:08                             ` Cyril Roelandt
2020-08-23 22:14                               ` Brice Goglin
2020-08-24  7:40                               ` Greg KH
2020-08-24 17:31                                 ` [PATCH] Ignore UAS for JMicron JMS567 ATA/ATAPI Bridge Cyril Roelandt
2020-08-24 20:18                                   ` Alan Stern
2020-08-25 21:22                                     ` [PATCH v2] " Cyril Roelandt

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.