All of lore.kernel.org
 help / color / mirror / Atom feed
From: Sam Ravnborg <sam@ravnborg.org>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: devicetree@vger.kernel.org, dri-devel@lists.freedesktop.org,
	linux-arm-msm@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	Daniel Vetter <daniel@ffwll.ch>, David Airlie <airlied@linux.ie>,
	Andrzej Hajda <a.hajda@samsung.com>,
	Neil Armstrong <narmstrong@baylibre.com>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
	Jonas Karlman <jonas@kwiboo.se>,
	Jernej Skrabec <jernej.skrabec@siol.net>,
	Vinod Koul <vkoul@kernel.org>
Subject: Re: [PATCH v2 1/3] dt-bindings: display: bridge: Add documentation for LT9611UXC
Date: Fri, 28 Aug 2020 21:18:51 +0200	[thread overview]
Message-ID: <20200828191851.GA668578@ravnborg.org> (raw)
In-Reply-To: <20200828154906.1662611-2-dmitry.baryshkov@linaro.org>

On Fri, Aug 28, 2020 at 06:49:04PM +0300, Dmitry Baryshkov wrote:
> Lontium LT9611UXC is a DSI to HDMI bridge which supports 2 DSI ports
> and I2S port as input and one HDMI port as output. The LT9611UXC chip is
> handled by a separate driver, but the bindings used are fully compatible
> with the LT9611 chip, so let's reuse the lt9611.yaml schema.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

We can apply this when the driver is ready.

	Sam

> ---
>  .../devicetree/bindings/display/bridge/lontium,lt9611.yaml   | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
> index d60208359234..7a1c89b995e2 100644
> --- a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
> @@ -4,18 +4,19 @@
>  $id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml#
>  $schema: http://devicetree.org/meta-schemas/core.yaml#
>  
> -title: Lontium LT9611 2 Port MIPI to HDMI Bridge
> +title: Lontium LT9611(UXC) 2 Port MIPI to HDMI Bridge
>  
>  maintainers:
>    - Vinod Koul <vkoul@kernel.org>
>  
>  description: |
> -  The LT9611 is a bridge device which converts DSI to HDMI
> +  The LT9611 and LT9611UXC are bridge devices which convert DSI to HDMI
>  
>  properties:
>    compatible:
>      enum:
>        - lontium,lt9611
> +      - lontium,lt9611uxc
>  
>    reg:
>      maxItems: 1
> -- 
> 2.28.0

WARNING: multiple messages have this Message-ID (diff)
From: Sam Ravnborg <sam@ravnborg.org>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: devicetree@vger.kernel.org,
	Jernej Skrabec <jernej.skrabec@siol.net>,
	Neil Armstrong <narmstrong@baylibre.com>,
	David Airlie <airlied@linux.ie>,
	linux-arm-msm@vger.kernel.org, Jonas Karlman <jonas@kwiboo.se>,
	dri-devel@lists.freedesktop.org,
	Andrzej Hajda <a.hajda@samsung.com>,
	Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Subject: Re: [PATCH v2 1/3] dt-bindings: display: bridge: Add documentation for LT9611UXC
Date: Fri, 28 Aug 2020 21:18:51 +0200	[thread overview]
Message-ID: <20200828191851.GA668578@ravnborg.org> (raw)
In-Reply-To: <20200828154906.1662611-2-dmitry.baryshkov@linaro.org>

On Fri, Aug 28, 2020 at 06:49:04PM +0300, Dmitry Baryshkov wrote:
> Lontium LT9611UXC is a DSI to HDMI bridge which supports 2 DSI ports
> and I2S port as input and one HDMI port as output. The LT9611UXC chip is
> handled by a separate driver, but the bindings used are fully compatible
> with the LT9611 chip, so let's reuse the lt9611.yaml schema.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

We can apply this when the driver is ready.

	Sam

> ---
>  .../devicetree/bindings/display/bridge/lontium,lt9611.yaml   | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
> index d60208359234..7a1c89b995e2 100644
> --- a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
> @@ -4,18 +4,19 @@
>  $id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml#
>  $schema: http://devicetree.org/meta-schemas/core.yaml#
>  
> -title: Lontium LT9611 2 Port MIPI to HDMI Bridge
> +title: Lontium LT9611(UXC) 2 Port MIPI to HDMI Bridge
>  
>  maintainers:
>    - Vinod Koul <vkoul@kernel.org>
>  
>  description: |
> -  The LT9611 is a bridge device which converts DSI to HDMI
> +  The LT9611 and LT9611UXC are bridge devices which convert DSI to HDMI
>  
>  properties:
>    compatible:
>      enum:
>        - lontium,lt9611
> +      - lontium,lt9611uxc
>  
>    reg:
>      maxItems: 1
> -- 
> 2.28.0
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

  reply	other threads:[~2020-08-28 19:19 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-28 15:49 [PATCH v2 2/3] Add LT9611UXC DSI to HDMI bridge support Dmitry Baryshkov
2020-08-28 15:49 ` Dmitry Baryshkov
2020-08-28 15:49 ` [PATCH v2 1/3] dt-bindings: display: bridge: Add documentation for LT9611UXC Dmitry Baryshkov
2020-08-28 15:49   ` Dmitry Baryshkov
2020-08-28 19:18   ` Sam Ravnborg [this message]
2020-08-28 19:18     ` Sam Ravnborg
2020-08-28 15:49 ` [PATCH v2 2/3] drm: bridge: add support for lontium LT9611UXC bridge Dmitry Baryshkov
2020-08-28 15:49   ` Dmitry Baryshkov
2020-08-28 19:58   ` Sam Ravnborg
2020-08-28 19:58     ` Sam Ravnborg
2020-08-31 14:01     ` Dmitry Baryshkov
2020-08-31 14:01       ` Dmitry Baryshkov
2020-08-28 15:49 ` [PATCH v2 3/3] drm: bridge: lt9611uxc: support working without DRM_BRIDGE_ATTACH_NO_CONNECTOR Dmitry Baryshkov
2020-08-28 15:49   ` Dmitry Baryshkov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200828191851.GA668578@ravnborg.org \
    --to=sam@ravnborg.org \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.baryshkov@linaro.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=jernej.skrabec@siol.net \
    --cc=jonas@kwiboo.se \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=narmstrong@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.