All of lore.kernel.org
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Thierry Reding <thierry.reding@gmail.com>,
	Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel@ffwll.ch>, Rob Herring <robh+dt@kernel.org>,
	Kukjin Kim <kgene@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Hoegeun Kwon <hoegeun.kwon@samsung.com>,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org
Cc: Marek Szyprowski <m.szyprowski@samsung.com>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Sylwester Nawrocki <snawrocki@kernel.org>
Subject: [PATCH 1/4] dt-bindings: display: samsung,amoled-mipi-dsi: Do not require enable-gpios on samsung,s6e63j0x03
Date: Sat, 29 Aug 2020 19:25:29 +0200	[thread overview]
Message-ID: <20200829172532.29358-1-krzk@kernel.org> (raw)

The samsung,s6e63j0x03 does not have enable GPIO, so do not require it.
This fixes dtbs_check warning:

  arch/arm/boot/dts/exynos3250-rinato.dt.yaml: panel@0: 'enable-gpios' is a required property

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 .../display/panel/samsung,amoled-mipi-dsi.yaml       | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
index 96bdde9298e0..ccc482570d6a 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
@@ -12,6 +12,17 @@ maintainers:
 allOf:
   - $ref: panel-common.yaml#
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s6e3ha2
+              - samsung,s6e3hf2
+    then:
+      required:
+        - enable-gpios
+
 properties:
   compatible:
     enum:
@@ -39,7 +50,6 @@ required:
   - vdd3-supply
   - vci-supply
   - reset-gpios
-  - enable-gpios
 
 additionalProperties: false
 
-- 
2.17.1


WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Thierry Reding <thierry.reding@gmail.com>,
	Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel@ffwll.ch>, Rob Herring <robh+dt@kernel.org>,
	Kukjin Kim <kgene@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Hoegeun Kwon <hoegeun.kwon@samsung.com>,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org
Cc: Sylwester Nawrocki <snawrocki@kernel.org>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Marek Szyprowski <m.szyprowski@samsung.com>
Subject: [PATCH 1/4] dt-bindings: display: samsung, amoled-mipi-dsi: Do not require enable-gpios on samsung, s6e63j0x03
Date: Sat, 29 Aug 2020 19:25:29 +0200	[thread overview]
Message-ID: <20200829172532.29358-1-krzk@kernel.org> (raw)

The samsung,s6e63j0x03 does not have enable GPIO, so do not require it.
This fixes dtbs_check warning:

  arch/arm/boot/dts/exynos3250-rinato.dt.yaml: panel@0: 'enable-gpios' is a required property

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 .../display/panel/samsung,amoled-mipi-dsi.yaml       | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
index 96bdde9298e0..ccc482570d6a 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
@@ -12,6 +12,17 @@ maintainers:
 allOf:
   - $ref: panel-common.yaml#
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s6e3ha2
+              - samsung,s6e3hf2
+    then:
+      required:
+        - enable-gpios
+
 properties:
   compatible:
     enum:
@@ -39,7 +50,6 @@ required:
   - vdd3-supply
   - vci-supply
   - reset-gpios
-  - enable-gpios
 
 additionalProperties: false
 
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Thierry Reding <thierry.reding@gmail.com>,
	Sam Ravnborg <sam@ravnborg.org>, David Airlie <airlied@linux.ie>,
	Daniel Vetter <daniel@ffwll.ch>, Rob Herring <robh+dt@kernel.org>,
	Kukjin Kim <kgene@kernel.org>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	Hoegeun Kwon <hoegeun.kwon@samsung.com>,
	dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org
Cc: Sylwester Nawrocki <snawrocki@kernel.org>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Marek Szyprowski <m.szyprowski@samsung.com>
Subject: [PATCH 1/4] dt-bindings: display: samsung, amoled-mipi-dsi: Do not require enable-gpios on samsung, s6e63j0x03
Date: Sat, 29 Aug 2020 19:25:29 +0200	[thread overview]
Message-ID: <20200829172532.29358-1-krzk@kernel.org> (raw)

The samsung,s6e63j0x03 does not have enable GPIO, so do not require it.
This fixes dtbs_check warning:

  arch/arm/boot/dts/exynos3250-rinato.dt.yaml: panel@0: 'enable-gpios' is a required property

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
 .../display/panel/samsung,amoled-mipi-dsi.yaml       | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
index 96bdde9298e0..ccc482570d6a 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,amoled-mipi-dsi.yaml
@@ -12,6 +12,17 @@ maintainers:
 allOf:
   - $ref: panel-common.yaml#
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - samsung,s6e3ha2
+              - samsung,s6e3hf2
+    then:
+      required:
+        - enable-gpios
+
 properties:
   compatible:
     enum:
@@ -39,7 +50,6 @@ required:
   - vdd3-supply
   - vci-supply
   - reset-gpios
-  - enable-gpios
 
 additionalProperties: false
 
-- 
2.17.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

             reply	other threads:[~2020-08-29 17:25 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-29 17:25 Krzysztof Kozlowski [this message]
2020-08-29 17:25 ` [PATCH 1/4] dt-bindings: display: samsung, amoled-mipi-dsi: Do not require enable-gpios on samsung, s6e63j0x03 Krzysztof Kozlowski
2020-08-29 17:25 ` Krzysztof Kozlowski
2020-08-29 17:25 ` [RFT 2/4] ARM: dts: exynos: Move fixed clocks under root node in Exynos3250 Krzysztof Kozlowski
2020-08-29 17:25   ` Krzysztof Kozlowski
2020-08-29 17:25   ` Krzysztof Kozlowski
2020-08-31 11:03   ` Marek Szyprowski
2020-08-31 11:03     ` Marek Szyprowski
2020-08-31 11:03     ` Marek Szyprowski
2020-09-01 10:15   ` Krzysztof Kozlowski
2020-09-01 10:15     ` Krzysztof Kozlowski
2020-09-01 10:15     ` Krzysztof Kozlowski
2020-08-29 17:25 ` [RFT 3/4] ARM: dts: exynos: Move CMU assigned ISP clocks to buses " Krzysztof Kozlowski
2020-08-29 17:25   ` Krzysztof Kozlowski
2020-08-29 17:25   ` Krzysztof Kozlowski
2020-08-31  8:11   ` Marek Szyprowski
2020-08-31  8:11     ` Marek Szyprowski
2020-08-31  8:11     ` Marek Szyprowski
2020-08-31  8:19     ` Krzysztof Kozlowski
2020-08-31  8:19       ` Krzysztof Kozlowski
2020-08-31  8:19       ` Krzysztof Kozlowski
2020-08-31  8:29       ` Marek Szyprowski
2020-08-31  8:29         ` Marek Szyprowski
2020-08-31  8:29         ` Marek Szyprowski
2020-08-31  8:31       ` Krzysztof Kozlowski
2020-08-31  8:31         ` Krzysztof Kozlowski
2020-08-31  8:31         ` Krzysztof Kozlowski
2020-08-29 17:25 ` [PATCH 4/4] ARM: dts: exynos: Remove snps,dwc2 compatible " Krzysztof Kozlowski
2020-08-29 17:25   ` [PATCH 4/4] ARM: dts: exynos: Remove snps, dwc2 " Krzysztof Kozlowski
2020-08-29 17:25   ` Krzysztof Kozlowski
2020-09-02 15:35   ` [PATCH 4/4] ARM: dts: exynos: Remove snps,dwc2 " Krzysztof Kozlowski
2020-09-02 15:35     ` Krzysztof Kozlowski
2020-09-02 15:35     ` Krzysztof Kozlowski
2020-08-29 21:06 ` [PATCH 1/4] dt-bindings: display: samsung,amoled-mipi-dsi: Do not require enable-gpios on samsung,s6e63j0x03 Sam Ravnborg
2020-08-29 21:06   ` Sam Ravnborg
2020-08-29 21:06   ` Sam Ravnborg
2020-09-14 18:16 ` [PATCH 1/4] dt-bindings: display: samsung, amoled-mipi-dsi: Do not require enable-gpios on samsung, s6e63j0x03 Rob Herring
2020-09-14 18:16   ` Rob Herring
2020-09-14 18:16   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200829172532.29358-1-krzk@kernel.org \
    --to=krzk@kernel.org \
    --cc=airlied@linux.ie \
    --cc=b.zolnierkie@samsung.com \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=hoegeun.kwon@samsung.com \
    --cc=kgene@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=m.szyprowski@samsung.com \
    --cc=robh+dt@kernel.org \
    --cc=sam@ravnborg.org \
    --cc=snawrocki@kernel.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.