[PATCH v14 0/2] media: i2c: Add support for OV02A10 sensor

From: Dongchun Zhu <dongchun.zhu@mediatek.com>
To: <mchehab@kernel.org>, <andriy.shevchenko@linux.intel.com>,
	<robh+dt@kernel.org>, <mark.rutland@arm.com>,
	<sakari.ailus@linux.intel.com>, <drinkcat@chromium.org>,
	<tfiga@chromium.org>, <matthias.bgg@gmail.com>,
	<bingbu.cao@intel.com>
Cc: <srv_heupstream@mediatek.com>,
	<linux-mediatek@lists.infradead.org>,
	<linux-arm-kernel@lists.infradead.org>, <sj.huang@mediatek.com>,
	<linux-media@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<louis.kuo@mediatek.com>, <shengnan.wang@mediatek.com>,
	<dongchun.zhu@mediatek.com>
Subject: [PATCH v14 0/2] media: i2c: Add support for OV02A10 sensor
Date: Wed, 2 Sep 2020 20:01:20 +0800	[thread overview]
Message-ID: <20200902120122.24456-1-dongchun.zhu@mediatek.com> (raw)

Hello,

This series adds YAML DT binding and V4L2 sub-device driver for Omnivision's
OV02A10 2-megapixel 10-bit RAW CMOS 1/5" sensor, which has a single MIPI lane
interface and uses the I2C bus for control and the CSI-2 bus for data.

The driver is implemented with V4L2 framework.
 - Async registered as a V4L2 sub-device.
 - As the first component of camera system including Seninf, ISP pipeline.
 - A media entity that provides one source pad in common and two for dual-cam.

Also this driver supports following features:
 - Manual exposure and analog gain control support
 - Vertical blanking control support
 - Test pattern support
 - Media controller support
 - Runtime PM support
 - Support resolution: 1600x1200 at 30FPS

Previous versions of this patch-set can be found here:
 v13: https://lore.kernel.org/linux-media/20200710101850.4604-1-dongchun.zhu@mediatek.com/
 v12: https://lore.kernel.org/linux-media/20200702115223.21507-1-dongchun.zhu@mediatek.com/
 v11: https://lore.kernel.org/linux-media/20200630024942.20891-1-dongchun.zhu@mediatek.com/
 v10: https://lore.kernel.org/linux-media/20200615122937.18965-3-dongchun.zhu@mediatek.com/
 v09: https://lore.kernel.org/linux-media/20200523084103.31276-1-dongchun.zhu@mediatek.com/
 v08: https://lore.kernel.org/linux-media/20200509080627.23222-1-dongchun.zhu@mediatek.com/
 v07: https://lore.kernel.org/linux-media/20200430080924.1140-1-dongchun.zhu@mediatek.com/
 v06: https://lore.kernel.org/linux-media/20191211112849.16705-1-dongchun.zhu@mediatek.com/
 v05: https://lore.kernel.org/linux-media/20191104105713.24311-1-dongchun.zhu@mediatek.com/
 v04: https://lore.kernel.org/linux-media/20190907092728.23897-1-dongchun.zhu@mediatek.com/
 v03: https://lore.kernel.org/linux-media/20190819034331.13098-1-dongchun.zhu@mediatek.com/
 v02: https://lore.kernel.org/linux-media/20190704084651.3105-1-dongchun.zhu@mediatek.com/
 v01: https://lore.kernel.org/linux-media/20190523102204.24112-1-dongchun.zhu@mediatek.com/

Changes of v14 mainly address comments from Tomasz and Sakari.
Compared to v13:
 - Fix imperfections in DT
 - Use an array property "ovti,mipi-clock-voltage" to indicate MIPI TX speed
 - Add the handler to the optional property "ovti,mipi-clock-voltage" in driver

Please help to review this patch.
Thanks.

Dongchun Zhu (2):
  media: dt-bindings: media: i2c: Document OV02A10 bindings
  media: i2c: Add OV02A10 image sensor driver

 .../bindings/media/i2c/ovti,ov02a10.yaml           |  161 +++
 MAINTAINERS                                        |    8 +
 drivers/media/i2c/Kconfig                          |   13 +
 drivers/media/i2c/Makefile                         |    1 +
 drivers/media/i2c/ov02a10.c                        | 1083 ++++++++++++++++++++
 5 files changed, 1266 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov02a10.yaml
 create mode 100644 drivers/media/i2c/ov02a10.c

-- 
2.9.2