* [PATCH] hwmon: sparx5: Fix initial reading of temperature
@ 2020-09-03 13:47 ` Lars Povlsen
0 siblings, 0 replies; 10+ messages in thread
From: Lars Povlsen @ 2020-09-03 13:47 UTC (permalink / raw)
To: Guenter Roeck
Cc: Lars Povlsen, Jean Delvare, Microchip Linux Driver Support,
linux-hwmon, linux-arm-kernel, linux-kernel
If the temperature is read before the internal calibration is
completed, the driver returns -EIO. Instead it should return -EAGAIN
to encourage repeating the operation.
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
---
drivers/hwmon/sparx5-temp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/sparx5-temp.c b/drivers/hwmon/sparx5-temp.c
index 1a2b1026b026..98be48e3a22a 100644
--- a/drivers/hwmon/sparx5-temp.c
+++ b/drivers/hwmon/sparx5-temp.c
@@ -56,7 +56,7 @@ static int s5_read(struct device *dev, enum hwmon_sensor_types type,
case hwmon_temp_input:
stat = readl_relaxed(hwmon->base + TEMP_STAT);
if (!(stat & TEMP_STAT_VALID))
- return -EIO;
+ return -EAGAIN;
value = stat & TEMP_STAT_TEMP;
/*
* From register documentation:
--
2.27.0
^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH] hwmon: sparx5: Fix initial reading of temperature
@ 2020-09-03 13:47 ` Lars Povlsen
0 siblings, 0 replies; 10+ messages in thread
From: Lars Povlsen @ 2020-09-03 13:47 UTC (permalink / raw)
To: Guenter Roeck
Cc: linux-hwmon, Jean Delvare, linux-kernel,
Microchip Linux Driver Support, Lars Povlsen, linux-arm-kernel
If the temperature is read before the internal calibration is
completed, the driver returns -EIO. Instead it should return -EAGAIN
to encourage repeating the operation.
Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
---
drivers/hwmon/sparx5-temp.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/sparx5-temp.c b/drivers/hwmon/sparx5-temp.c
index 1a2b1026b026..98be48e3a22a 100644
--- a/drivers/hwmon/sparx5-temp.c
+++ b/drivers/hwmon/sparx5-temp.c
@@ -56,7 +56,7 @@ static int s5_read(struct device *dev, enum hwmon_sensor_types type,
case hwmon_temp_input:
stat = readl_relaxed(hwmon->base + TEMP_STAT);
if (!(stat & TEMP_STAT_VALID))
- return -EIO;
+ return -EAGAIN;
value = stat & TEMP_STAT_TEMP;
/*
* From register documentation:
--
2.27.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH] hwmon: sparx5: Fix initial reading of temperature
2020-09-03 13:47 ` Lars Povlsen
@ 2020-09-03 13:52 ` Guenter Roeck
-1 siblings, 0 replies; 10+ messages in thread
From: Guenter Roeck @ 2020-09-03 13:52 UTC (permalink / raw)
To: Lars Povlsen
Cc: Jean Delvare, Microchip Linux Driver Support, linux-hwmon,
linux-arm-kernel, linux-kernel
On 9/3/20 6:47 AM, Lars Povlsen wrote:
> If the temperature is read before the internal calibration is
> completed, the driver returns -EIO. Instead it should return -EAGAIN
> to encourage repeating the operation.
>
> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
> ---
> drivers/hwmon/sparx5-temp.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/hwmon/sparx5-temp.c b/drivers/hwmon/sparx5-temp.c
> index 1a2b1026b026..98be48e3a22a 100644
> --- a/drivers/hwmon/sparx5-temp.c
> +++ b/drivers/hwmon/sparx5-temp.c
> @@ -56,7 +56,7 @@ static int s5_read(struct device *dev, enum hwmon_sensor_types type,
> case hwmon_temp_input:
> stat = readl_relaxed(hwmon->base + TEMP_STAT);
> if (!(stat & TEMP_STAT_VALID))
> - return -EIO;
> + return -EAGAIN;
The problem is that this may result in a hard loop and effectively hang the system,
or at least the calling process. It may be better to return -ENODATA in this situation.
Guenter
> value = stat & TEMP_STAT_TEMP;
> /*
> * From register documentation:
> --
> 2.27.0
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] hwmon: sparx5: Fix initial reading of temperature
@ 2020-09-03 13:52 ` Guenter Roeck
0 siblings, 0 replies; 10+ messages in thread
From: Guenter Roeck @ 2020-09-03 13:52 UTC (permalink / raw)
To: Lars Povlsen
Cc: linux-hwmon, Jean Delvare, linux-kernel, linux-arm-kernel,
Microchip Linux Driver Support
On 9/3/20 6:47 AM, Lars Povlsen wrote:
> If the temperature is read before the internal calibration is
> completed, the driver returns -EIO. Instead it should return -EAGAIN
> to encourage repeating the operation.
>
> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
> ---
> drivers/hwmon/sparx5-temp.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/hwmon/sparx5-temp.c b/drivers/hwmon/sparx5-temp.c
> index 1a2b1026b026..98be48e3a22a 100644
> --- a/drivers/hwmon/sparx5-temp.c
> +++ b/drivers/hwmon/sparx5-temp.c
> @@ -56,7 +56,7 @@ static int s5_read(struct device *dev, enum hwmon_sensor_types type,
> case hwmon_temp_input:
> stat = readl_relaxed(hwmon->base + TEMP_STAT);
> if (!(stat & TEMP_STAT_VALID))
> - return -EIO;
> + return -EAGAIN;
The problem is that this may result in a hard loop and effectively hang the system,
or at least the calling process. It may be better to return -ENODATA in this situation.
Guenter
> value = stat & TEMP_STAT_TEMP;
> /*
> * From register documentation:
> --
> 2.27.0
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] hwmon: sparx5: Fix initial reading of temperature
2020-09-03 13:52 ` Guenter Roeck
@ 2020-09-04 8:33 ` Lars Povlsen
-1 siblings, 0 replies; 10+ messages in thread
From: Lars Povlsen @ 2020-09-04 8:33 UTC (permalink / raw)
To: Guenter Roeck
Cc: Lars Povlsen, Jean Delvare, Microchip Linux Driver Support,
linux-hwmon, linux-arm-kernel, linux-kernel, Zhang Rui,
Daniel Lezcano, Amit Kucheria
Guenter Roeck writes:
> On 9/3/20 6:47 AM, Lars Povlsen wrote:
>> If the temperature is read before the internal calibration is
>> completed, the driver returns -EIO. Instead it should return -EAGAIN
>> to encourage repeating the operation.
>>
>> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
>> ---
>> drivers/hwmon/sparx5-temp.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/hwmon/sparx5-temp.c b/drivers/hwmon/sparx5-temp.c
>> index 1a2b1026b026..98be48e3a22a 100644
>> --- a/drivers/hwmon/sparx5-temp.c
>> +++ b/drivers/hwmon/sparx5-temp.c
>> @@ -56,7 +56,7 @@ static int s5_read(struct device *dev, enum hwmon_sensor_types type,
>> case hwmon_temp_input:
>> stat = readl_relaxed(hwmon->base + TEMP_STAT);
>> if (!(stat & TEMP_STAT_VALID))
>> - return -EIO;
>> + return -EAGAIN;
>
> The problem is that this may result in a hard loop and effectively hang the system,
> or at least the calling process. It may be better to return -ENODATA in this situation.
>
Guenther,
Thank you for your response.
The motivation for the patch was as I tried to use thermal support to
control a fan, and I noticed an initial quip from
thermal_core.c:update_temperature() - it will throw a dev_warn() for
anything else than an "EAGAIN". The EAGAIN also seems to be used by
several other hwmon drivers in similar situations.
The bottom line is that I would like to get rid of the warning
message. Changing the error code to ENODATA does not fix what I am
trying to accomplish.
Do you have any suggestions on how to achieve the objective?
Sincerely,
---Lars
> Guenter
>
>> value = stat & TEMP_STAT_TEMP;
>> /*
>> * From register documentation:
>> --
>> 2.27.0
>>
--
Lars Povlsen,
Microchip
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] hwmon: sparx5: Fix initial reading of temperature
@ 2020-09-04 8:33 ` Lars Povlsen
0 siblings, 0 replies; 10+ messages in thread
From: Lars Povlsen @ 2020-09-04 8:33 UTC (permalink / raw)
To: Guenter Roeck
Cc: linux-hwmon, Jean Delvare, Daniel Lezcano, linux-kernel,
Microchip Linux Driver Support, Lars Povlsen, Amit Kucheria,
Zhang Rui, linux-arm-kernel
Guenter Roeck writes:
> On 9/3/20 6:47 AM, Lars Povlsen wrote:
>> If the temperature is read before the internal calibration is
>> completed, the driver returns -EIO. Instead it should return -EAGAIN
>> to encourage repeating the operation.
>>
>> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
>> ---
>> drivers/hwmon/sparx5-temp.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/hwmon/sparx5-temp.c b/drivers/hwmon/sparx5-temp.c
>> index 1a2b1026b026..98be48e3a22a 100644
>> --- a/drivers/hwmon/sparx5-temp.c
>> +++ b/drivers/hwmon/sparx5-temp.c
>> @@ -56,7 +56,7 @@ static int s5_read(struct device *dev, enum hwmon_sensor_types type,
>> case hwmon_temp_input:
>> stat = readl_relaxed(hwmon->base + TEMP_STAT);
>> if (!(stat & TEMP_STAT_VALID))
>> - return -EIO;
>> + return -EAGAIN;
>
> The problem is that this may result in a hard loop and effectively hang the system,
> or at least the calling process. It may be better to return -ENODATA in this situation.
>
Guenther,
Thank you for your response.
The motivation for the patch was as I tried to use thermal support to
control a fan, and I noticed an initial quip from
thermal_core.c:update_temperature() - it will throw a dev_warn() for
anything else than an "EAGAIN". The EAGAIN also seems to be used by
several other hwmon drivers in similar situations.
The bottom line is that I would like to get rid of the warning
message. Changing the error code to ENODATA does not fix what I am
trying to accomplish.
Do you have any suggestions on how to achieve the objective?
Sincerely,
---Lars
> Guenter
>
>> value = stat & TEMP_STAT_TEMP;
>> /*
>> * From register documentation:
>> --
>> 2.27.0
>>
--
Lars Povlsen,
Microchip
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] hwmon: sparx5: Fix initial reading of temperature
2020-09-04 8:33 ` Lars Povlsen
@ 2020-09-04 14:08 ` Guenter Roeck
-1 siblings, 0 replies; 10+ messages in thread
From: Guenter Roeck @ 2020-09-04 14:08 UTC (permalink / raw)
To: Lars Povlsen
Cc: Jean Delvare, Microchip Linux Driver Support, linux-hwmon,
linux-arm-kernel, linux-kernel, Zhang Rui, Daniel Lezcano,
Amit Kucheria
On 9/4/20 1:33 AM, Lars Povlsen wrote:
>
> Guenter Roeck writes:
>
>> On 9/3/20 6:47 AM, Lars Povlsen wrote:
>>> If the temperature is read before the internal calibration is
>>> completed, the driver returns -EIO. Instead it should return -EAGAIN
>>> to encourage repeating the operation.
>>>
>>> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
>>> ---
>>> drivers/hwmon/sparx5-temp.c | 2 +-
>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/hwmon/sparx5-temp.c b/drivers/hwmon/sparx5-temp.c
>>> index 1a2b1026b026..98be48e3a22a 100644
>>> --- a/drivers/hwmon/sparx5-temp.c
>>> +++ b/drivers/hwmon/sparx5-temp.c
>>> @@ -56,7 +56,7 @@ static int s5_read(struct device *dev, enum hwmon_sensor_types type,
>>> case hwmon_temp_input:
>>> stat = readl_relaxed(hwmon->base + TEMP_STAT);
>>> if (!(stat & TEMP_STAT_VALID))
>>> - return -EIO;
>>> + return -EAGAIN;
>>
>> The problem is that this may result in a hard loop and effectively hang the system,
>> or at least the calling process. It may be better to return -ENODATA in this situation.
>>
>
> Guenther,
>
> Thank you for your response.
>
> The motivation for the patch was as I tried to use thermal support to
> control a fan, and I noticed an initial quip from
> thermal_core.c:update_temperature() - it will throw a dev_warn() for
> anything else than an "EAGAIN". The EAGAIN also seems to be used by
> several other hwmon drivers in similar situations.
>
> The bottom line is that I would like to get rid of the warning
> message. Changing the error code to ENODATA does not fix what I am
> trying to accomplish.
>
Sigh. I know that -EAGAIN is used, but it has its own problems - userspace
is inclined to retry directly, causing hard loops.
Ok, lets go with -EAGAIN then. Can't be helped. I'll apply your patch.
Guenter
> Do you have any suggestions on how to achieve the objective?
>
> Sincerely,
>
> ---Lars
>
>> Guenter
>>
>>> value = stat & TEMP_STAT_TEMP;
>>> /*
>>> * From register documentation:
>>> --
>>> 2.27.0
>>>
>
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] hwmon: sparx5: Fix initial reading of temperature
@ 2020-09-04 14:08 ` Guenter Roeck
0 siblings, 0 replies; 10+ messages in thread
From: Guenter Roeck @ 2020-09-04 14:08 UTC (permalink / raw)
To: Lars Povlsen
Cc: linux-hwmon, Jean Delvare, Daniel Lezcano, linux-kernel,
Microchip Linux Driver Support, Amit Kucheria, Zhang Rui,
linux-arm-kernel
On 9/4/20 1:33 AM, Lars Povlsen wrote:
>
> Guenter Roeck writes:
>
>> On 9/3/20 6:47 AM, Lars Povlsen wrote:
>>> If the temperature is read before the internal calibration is
>>> completed, the driver returns -EIO. Instead it should return -EAGAIN
>>> to encourage repeating the operation.
>>>
>>> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
>>> ---
>>> drivers/hwmon/sparx5-temp.c | 2 +-
>>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/hwmon/sparx5-temp.c b/drivers/hwmon/sparx5-temp.c
>>> index 1a2b1026b026..98be48e3a22a 100644
>>> --- a/drivers/hwmon/sparx5-temp.c
>>> +++ b/drivers/hwmon/sparx5-temp.c
>>> @@ -56,7 +56,7 @@ static int s5_read(struct device *dev, enum hwmon_sensor_types type,
>>> case hwmon_temp_input:
>>> stat = readl_relaxed(hwmon->base + TEMP_STAT);
>>> if (!(stat & TEMP_STAT_VALID))
>>> - return -EIO;
>>> + return -EAGAIN;
>>
>> The problem is that this may result in a hard loop and effectively hang the system,
>> or at least the calling process. It may be better to return -ENODATA in this situation.
>>
>
> Guenther,
>
> Thank you for your response.
>
> The motivation for the patch was as I tried to use thermal support to
> control a fan, and I noticed an initial quip from
> thermal_core.c:update_temperature() - it will throw a dev_warn() for
> anything else than an "EAGAIN". The EAGAIN also seems to be used by
> several other hwmon drivers in similar situations.
>
> The bottom line is that I would like to get rid of the warning
> message. Changing the error code to ENODATA does not fix what I am
> trying to accomplish.
>
Sigh. I know that -EAGAIN is used, but it has its own problems - userspace
is inclined to retry directly, causing hard loops.
Ok, lets go with -EAGAIN then. Can't be helped. I'll apply your patch.
Guenter
> Do you have any suggestions on how to achieve the objective?
>
> Sincerely,
>
> ---Lars
>
>> Guenter
>>
>>> value = stat & TEMP_STAT_TEMP;
>>> /*
>>> * From register documentation:
>>> --
>>> 2.27.0
>>>
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] hwmon: sparx5: Fix initial reading of temperature
2020-09-03 13:47 ` Lars Povlsen
@ 2020-09-04 16:40 ` Guenter Roeck
-1 siblings, 0 replies; 10+ messages in thread
From: Guenter Roeck @ 2020-09-04 16:40 UTC (permalink / raw)
To: Lars Povlsen
Cc: Jean Delvare, Microchip Linux Driver Support, linux-hwmon,
linux-arm-kernel, linux-kernel
On Thu, Sep 03, 2020 at 03:47:04PM +0200, Lars Povlsen wrote:
> If the temperature is read before the internal calibration is
> completed, the driver returns -EIO. Instead it should return -EAGAIN
> to encourage repeating the operation.
>
> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Applied. I added a note stating that I would prefer -ENODATA, and why,
but that this is not feasible due to thermal subsystem requirements.
Thanks,
Guenter
> ---
> drivers/hwmon/sparx5-temp.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> --
> 2.27.0
>
> diff --git a/drivers/hwmon/sparx5-temp.c b/drivers/hwmon/sparx5-temp.c
> index 1a2b1026b026..98be48e3a22a 100644
> --- a/drivers/hwmon/sparx5-temp.c
> +++ b/drivers/hwmon/sparx5-temp.c
> @@ -56,7 +56,7 @@ static int s5_read(struct device *dev, enum hwmon_sensor_types type,
> case hwmon_temp_input:
> stat = readl_relaxed(hwmon->base + TEMP_STAT);
> if (!(stat & TEMP_STAT_VALID))
> - return -EIO;
> + return -EAGAIN;
> value = stat & TEMP_STAT_TEMP;
> /*
> * From register documentation:
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] hwmon: sparx5: Fix initial reading of temperature
@ 2020-09-04 16:40 ` Guenter Roeck
0 siblings, 0 replies; 10+ messages in thread
From: Guenter Roeck @ 2020-09-04 16:40 UTC (permalink / raw)
To: Lars Povlsen
Cc: linux-hwmon, Jean Delvare, linux-kernel, linux-arm-kernel,
Microchip Linux Driver Support
On Thu, Sep 03, 2020 at 03:47:04PM +0200, Lars Povlsen wrote:
> If the temperature is read before the internal calibration is
> completed, the driver returns -EIO. Instead it should return -EAGAIN
> to encourage repeating the operation.
>
> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com>
Applied. I added a note stating that I would prefer -ENODATA, and why,
but that this is not feasible due to thermal subsystem requirements.
Thanks,
Guenter
> ---
> drivers/hwmon/sparx5-temp.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> --
> 2.27.0
>
> diff --git a/drivers/hwmon/sparx5-temp.c b/drivers/hwmon/sparx5-temp.c
> index 1a2b1026b026..98be48e3a22a 100644
> --- a/drivers/hwmon/sparx5-temp.c
> +++ b/drivers/hwmon/sparx5-temp.c
> @@ -56,7 +56,7 @@ static int s5_read(struct device *dev, enum hwmon_sensor_types type,
> case hwmon_temp_input:
> stat = readl_relaxed(hwmon->base + TEMP_STAT);
> if (!(stat & TEMP_STAT_VALID))
> - return -EIO;
> + return -EAGAIN;
> value = stat & TEMP_STAT_TEMP;
> /*
> * From register documentation:
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2020-09-04 16:42 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-03 13:47 [PATCH] hwmon: sparx5: Fix initial reading of temperature Lars Povlsen
2020-09-03 13:47 ` Lars Povlsen
2020-09-03 13:52 ` Guenter Roeck
2020-09-03 13:52 ` Guenter Roeck
2020-09-04 8:33 ` Lars Povlsen
2020-09-04 8:33 ` Lars Povlsen
2020-09-04 14:08 ` Guenter Roeck
2020-09-04 14:08 ` Guenter Roeck
2020-09-04 16:40 ` Guenter Roeck
2020-09-04 16:40 ` Guenter Roeck
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.