From: Krzysztof Kozlowski <krzk@kernel.org> To: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: Krzysztof Kozlowski <krzk@kernel.org> Subject: [PATCH v2 05/14] arm64: dts: imx8mn-ddr4-evk: Align regulator names with schema Date: Fri, 4 Sep 2020 08:27:34 +0200 [thread overview] Message-ID: <20200904062743.6273-5-krzk@kernel.org> (raw) In-Reply-To: <20200904062743.6273-1-krzk@kernel.org> Device tree schema expects regulator names to be lowercase. Changing to lowercase has multiple effects: 1. LDO6 supply is now properly configured, because regulator driver looks for supplies by lowercase name, 2. User-visible names via sysfs or debugfs are now lowercase, 2. dtbs_check warnings are fixed: pmic@4b: regulators:LDO1:regulator-name:0: 'LDO1' does not match '^ldo[1-6]$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- .../boot/dts/freescale/imx8mn-ddr4-evk.dts | 22 +++++++++---------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts index 3ac8f9d3c372..8f7155716c84 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts @@ -60,7 +60,7 @@ regulators { buck1_reg: BUCK1 { - regulator-name = "BUCK1"; + regulator-name = "buck1"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; @@ -69,7 +69,7 @@ }; buck2_reg: BUCK2 { - regulator-name = "BUCK2"; + regulator-name = "buck2"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; @@ -79,14 +79,14 @@ buck3_reg: BUCK3 { // BUCK5 in datasheet - regulator-name = "BUCK3"; + regulator-name = "buck3"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1350000>; }; buck4_reg: BUCK4 { // BUCK6 in datasheet - regulator-name = "BUCK4"; + regulator-name = "buck4"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -95,7 +95,7 @@ buck5_reg: BUCK5 { // BUCK7 in datasheet - regulator-name = "BUCK5"; + regulator-name = "buck5"; regulator-min-microvolt = <1605000>; regulator-max-microvolt = <1995000>; regulator-boot-on; @@ -104,7 +104,7 @@ buck6_reg: BUCK6 { // BUCK8 in datasheet - regulator-name = "BUCK6"; + regulator-name = "buck6"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; regulator-boot-on; @@ -112,7 +112,7 @@ }; ldo1_reg: LDO1 { - regulator-name = "LDO1"; + regulator-name = "ldo1"; regulator-min-microvolt = <1600000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -120,7 +120,7 @@ }; ldo2_reg: LDO2 { - regulator-name = "LDO2"; + regulator-name = "ldo2"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; regulator-boot-on; @@ -128,7 +128,7 @@ }; ldo3_reg: LDO3 { - regulator-name = "LDO3"; + regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -136,7 +136,7 @@ }; ldo4_reg: LDO4 { - regulator-name = "LDO4"; + regulator-name = "ldo4"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; regulator-boot-on; @@ -144,7 +144,7 @@ }; ldo6_reg: LDO6 { - regulator-name = "LDO6"; + regulator-name = "ldo6"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; regulator-boot-on; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Krzysztof Kozlowski <krzk@kernel.org> To: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: Krzysztof Kozlowski <krzk@kernel.org> Subject: [PATCH v2 05/14] arm64: dts: imx8mn-ddr4-evk: Align regulator names with schema Date: Fri, 4 Sep 2020 08:27:34 +0200 [thread overview] Message-ID: <20200904062743.6273-5-krzk@kernel.org> (raw) In-Reply-To: <20200904062743.6273-1-krzk@kernel.org> Device tree schema expects regulator names to be lowercase. Changing to lowercase has multiple effects: 1. LDO6 supply is now properly configured, because regulator driver looks for supplies by lowercase name, 2. User-visible names via sysfs or debugfs are now lowercase, 2. dtbs_check warnings are fixed: pmic@4b: regulators:LDO1:regulator-name:0: 'LDO1' does not match '^ldo[1-6]$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> --- .../boot/dts/freescale/imx8mn-ddr4-evk.dts | 22 +++++++++---------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts index 3ac8f9d3c372..8f7155716c84 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts @@ -60,7 +60,7 @@ regulators { buck1_reg: BUCK1 { - regulator-name = "BUCK1"; + regulator-name = "buck1"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; @@ -69,7 +69,7 @@ }; buck2_reg: BUCK2 { - regulator-name = "BUCK2"; + regulator-name = "buck2"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1300000>; regulator-boot-on; @@ -79,14 +79,14 @@ buck3_reg: BUCK3 { // BUCK5 in datasheet - regulator-name = "BUCK3"; + regulator-name = "buck3"; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1350000>; }; buck4_reg: BUCK4 { // BUCK6 in datasheet - regulator-name = "BUCK4"; + regulator-name = "buck4"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -95,7 +95,7 @@ buck5_reg: BUCK5 { // BUCK7 in datasheet - regulator-name = "BUCK5"; + regulator-name = "buck5"; regulator-min-microvolt = <1605000>; regulator-max-microvolt = <1995000>; regulator-boot-on; @@ -104,7 +104,7 @@ buck6_reg: BUCK6 { // BUCK8 in datasheet - regulator-name = "BUCK6"; + regulator-name = "buck6"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1400000>; regulator-boot-on; @@ -112,7 +112,7 @@ }; ldo1_reg: LDO1 { - regulator-name = "LDO1"; + regulator-name = "ldo1"; regulator-min-microvolt = <1600000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -120,7 +120,7 @@ }; ldo2_reg: LDO2 { - regulator-name = "LDO2"; + regulator-name = "ldo2"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <900000>; regulator-boot-on; @@ -128,7 +128,7 @@ }; ldo3_reg: LDO3 { - regulator-name = "LDO3"; + regulator-name = "ldo3"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; @@ -136,7 +136,7 @@ }; ldo4_reg: LDO4 { - regulator-name = "LDO4"; + regulator-name = "ldo4"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; regulator-boot-on; @@ -144,7 +144,7 @@ }; ldo6_reg: LDO6 { - regulator-name = "LDO6"; + regulator-name = "ldo6"; regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; regulator-boot-on; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-04 6:28 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-04 6:27 [PATCH v2 01/14] arm64: dts: imx8mm-beacon: Align pin configuration group names with schema Krzysztof Kozlowski 2020-09-04 6:27 ` Krzysztof Kozlowski 2020-09-04 6:27 ` [PATCH v2 02/14] arm64: dts: imx8mm-evk: Add 32.768 kHz clock to PMIC Krzysztof Kozlowski 2020-09-04 6:27 ` Krzysztof Kozlowski 2020-09-04 6:27 ` [PATCH v2 03/14] arm64: dts: imx8mm-evk: Align pin configuration group names with schema Krzysztof Kozlowski 2020-09-04 6:27 ` Krzysztof Kozlowski 2020-09-04 6:27 ` [PATCH v2 04/14] arm64: dts: imx8mm-ddr4-evk: " Krzysztof Kozlowski 2020-09-04 6:27 ` Krzysztof Kozlowski 2020-09-04 6:27 ` Krzysztof Kozlowski [this message] 2020-09-04 6:27 ` [PATCH v2 05/14] arm64: dts: imx8mn-ddr4-evk: Align regulator " Krzysztof Kozlowski 2020-09-04 6:27 ` [PATCH v2 06/14] arm64: dts: imx8mn-evk: Align pin configuration group " Krzysztof Kozlowski 2020-09-04 6:27 ` Krzysztof Kozlowski 2020-09-04 6:27 ` [PATCH v2 07/14] arm64: dts: imx8mq-evk: " Krzysztof Kozlowski 2020-09-04 6:27 ` Krzysztof Kozlowski 2020-09-04 6:27 ` [PATCH v2 08/14] arm64: dts: imx8mq-librem5-devkit: " Krzysztof Kozlowski 2020-09-04 6:27 ` Krzysztof Kozlowski 2020-09-04 6:27 ` [PATCH v2 09/14] arm64: dts: imx8mq-phanbell: " Krzysztof Kozlowski 2020-09-04 6:27 ` Krzysztof Kozlowski 2020-09-04 6:27 ` [PATCH v2 10/14] arm64: dts: imx8mq-pico-pi: " Krzysztof Kozlowski 2020-09-04 6:27 ` Krzysztof Kozlowski 2020-09-04 6:27 ` [PATCH v2 11/14] arm64: dts: imx8mq-sr-som: " Krzysztof Kozlowski 2020-09-04 6:27 ` Krzysztof Kozlowski 2020-09-04 6:27 ` [PATCH v2 12/14] arm64: dts: imx8mq-hummingboard-pulse: " Krzysztof Kozlowski 2020-09-04 6:27 ` Krzysztof Kozlowski 2020-09-04 6:27 ` [PATCH v2 13/14] arm64: dts: imx8qxp-colibri: " Krzysztof Kozlowski 2020-09-04 6:27 ` Krzysztof Kozlowski 2020-09-04 6:27 ` [PATCH v2 14/14] ARM: dts: imx28-m28: Align GPMI NAND node name " Krzysztof Kozlowski 2020-09-04 6:27 ` Krzysztof Kozlowski 2020-09-05 8:05 ` Shawn Guo 2020-09-05 8:05 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200904062743.6273-5-krzk@kernel.org \ --to=krzk@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.