* [PULL] IIO: First set of new device support etc for the 5.10 cycle
@ 2020-09-06 12:39 Jonathan Cameron
2020-09-06 14:56 ` Greg KH
0 siblings, 1 reply; 4+ messages in thread
From: Jonathan Cameron @ 2020-09-06 12:39 UTC (permalink / raw)
To: gregkh; +Cc: linux-iio
The following changes since commit bc752d2f345bf55d71b3422a6a24890ea03168dc:
staging: hikey9xx: Kconfig: add regulator dependency (2020-08-18 19:15:47 +0200)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.10a
for you to fetch changes up to 1bebdcb928eba880f3a119bacb8149216206958a:
drivers/iio/humidity/hdc2010.c:305:2-3: Unneeded semicolon (2020-09-03 19:41:00 +0100)
----------------------------------------------------------------
First set of new device support, features and cleanup for IIO in 5.10 cycle
A few changes to how I write this cover letter.
* Started to use manufacturer prefixes to group changes better.
* Stop list minor formatting etc changes.
* Whilst I appreciate those changes, we don't need to call them out here.
New device support:
* adi,adxrs290
- New driver for this gyroscope with dt bindings. One fix follows.
* ams,as73211
- New driver for this colour sensor with dt bindings. Also includes
docs for XYZ modifiers as used for the CIE colour space. Sysfs docs.
* atlas,atlas-ezo-sensor
- Support O_2 sensor, includes new modifier for concentration.
- Support humidity sensor.
* ti,hdc2010
- New driver support hdc2010 and hdc2080 humidity sensors. Includes dt
bindings.
Cleanup, minor fixes and features
* core
- Make the trigger related stub functions static inline, avoiding some build
warnings.
- buffer-dmaengine. Allow adjusting bytes_used with residue info.
* dev_error_probe to replace open coded equivalent in many drivers.
* docs and comment fixes
- Fix some typos, doubled words, capitalisation and punctuation.
* dt binding conversions to yaml
- lltc,ltc2497
- lltc,ltc2632
- maxim,max11100
- maxim,max1118
- maxim,max9611
- microchip,mcp3201
- microchip,mcp342x (add to trivial devices)
- ti,adc0832
- ti,adc108s102
- ti,adc128s052
- ti,adc161s626
- ti,ads8344
- ti,tlc4541 (includes adding an accidentally dropped original binding doc)
* adi,adi-axi-adc
- Use kobj_to_dev instead of open coding.
* adi,ad5686
- Constify iio_chan_spec
* adi,ad8366
- Add HMC1119 to kconfig help text as the driver supports it.
* adi,ad9523
- Use devm for reset of probe and drop remove.
* adi,adxl372
- Tidy up alignment
- Add OF table
- Add peak mode support with some docs.
* bosch,bma220 (general tidy up)
- Fix some return codes.
- Use read_avail callback rather than open coding attrs.
- Use dev_get_drvdata rather than dance via to_spi_device()
- Mark PM functions as __maybe_unused rather than #ifdef fun.
- Drop ACPI_PTR protections and ifdefs.
- Tidy up header ordering.
- BIT and GENMASK
* broadcom,bcm_iproc
- Drop of_match_ptr protection and switch to mod_devicetable.h
Part of general move to get this anti-pattern out of IIO.
* melexis,mlx90614
- Simplify some calculations.
- Add some kernel_doc
- Use regmap poll loop rather than open coding.
- Add extended calibration option.
* sensortec,sx9310, wide ranging set of fixes and cleanups.
- Document dt-binding.
- Rename some macros to align better with spec sheet
- Fix some issues with irq handling.
- Drop of_match_ptr and ACPI_PTR macros to avoid unused warnings etc.
- Switch to probe_new
- Fix memory alignment for iio_push_to_buffers_with_timestamp()
- Use long for bitmaps to allow use of for_each_bit_set()
- Use regmap_read_poll instead of opencoding.
- Simplify error paths
- Enabled regulators at probe.
- Use trigger flags from firmware rather than forcing them in the driver.
* ti,adc081c
- Drop ACPI IDs that are not likely to be official ones and we don't believe
anyone is using.
* ti,adc108s102
- Drop CONFIG_OF and of_match_ptr protections.
* ti,adc128s052
- Drop of_match_ptr protection and include mod_devicetable.h
* ti,dac5571
- Support powerdown for mutlichannel usecases.
* xpowers,axp20x
- Convert from OF to generic fw / device properties. Unlikely anyone will
use this with anything other than devicetree, but this is part of a
general move across IIO.
----------------------------------------------------------------
Ahmad Fatoum (1):
Documentation: ABI: iio: fix some spelling mistakes
Alexandru Ardelean (4):
iio: frequency: ad9523: convert rest of driver to device managed functions
iio: adxl372_spi: change indentation for of_table
iio: Kconfig: ad8366: add entry for HMC1119 chip
iio: buffer-dmaengine: adjust `bytes_used` with residue info
Alexandru Tachici (1):
iio: accel: adxl372: Add additional trigger ABI docs
Andy Shevchenko (8):
iio: accel: bma220: Fix returned codes from bma220_init(), bma220_deinit()
iio: accel: bma220: Convert to use ->read_avail()
iio: accel: bma220: Use dev_get_drvdata() directly
iio: accel: bma220: Mark PM functions as __maybe_unused
iio: accel: bma220: Drop ACPI_PTR() and accompanying ifdeffery
iio: accel: bma220: Group IIO headers together
iio: accel: bma220: Use BIT() and GENMASK() macros
iio: accel: bma220: Remove unneeded blank lines
Ankit Baluni (1):
Staging: iio: Fixed a punctuation and a spelling mistake.
Calvin Glisson (1):
staging: iio: ad9834: Remove excess blank line
Chris Ruehl (1):
iio/dac: convert ltc2632.txt to lltc,ltc2632.yaml
Christian Eggers (3):
dt-bindings: iio: light: add AMS AS73211 support
iio: light: as73211: New driver
iio: documentation: light: Add as73211 sysfs documentation
Crt Mori (5):
iio:temperature:mlx90632: Reduce number of equal calulcations
iio:temperature:mlx90632: Add kerneldoc to the internal struct
iio:temperature:mlx90632: Convert polling while loop to regmap
iio:temperature:mlx90632: Adding extended calibration option
iio:temperature:mlx90632: Some stylefixing leftovers
Daniel Campello (12):
dt-bindings: iio: Add bindings for sx9310 sensor
iio: sx9310: Update macros declarations
iio: sx9310: Fix irq handling
iio: sx9310: Remove acpi and of table macros
iio: sx9310: Change from .probe to .probe_new
iio: sx9310: Fixes various memory handling
iio: sx9310: Use long instead of int for channel bitmaps
iio: sx9310: Use regmap_read_poll_timeout() for compensation
iio: sx9310: Update copyright
iio: sx9310: Simplify error return handling
iio: sx9310: Use variable to hold &client->dev
iio: sx9310: Miscellaneous format fixes
Eugene Zaikonnikov (2):
iio: humidity: Add TI HDC20x0 support
dt-bindings: iio: humidity: Add TI HDC20x0 support
Gwendal Grignou (1):
docs: abi: iio: Use What: consistently
Jonathan Cameron (17):
dt-bindings: iio: adc: maxim,max11100 yaml conversion
dt-bindings: iio: adc: maxim,max9611 yaml conversions
dt-bindings: iio: adc: maxim,max1118 yaml conversion
iio:adc:bcm_iproc: Drop of_match_ptr protection and switch to mod_devicetable.h
iio:adc:ti-adc128s052: drop of_match_ptr protection
iio:adc:ti-adc108s102: Drop CONFIG_OF and of_match_ptr protections
iio:adc:ti-adc081c: Drop ACPI ids that seem very unlikely to be official.
iio:adc:axp20x: Convert from OF to generic fw / device properties
dt-bindings: trivial-devices: Add mcp342x ADCs and drop separate binding doc.
dt-bindings: iio: adc: ti,adc108s102 yaml conversion
dt-bindings: iio: adc: lltc,ltc2497 yaml conversion.
dt-bindings: iio: adc: ti,adc161s626 yaml conversion.
dt-bindings: iio: adc: ti,adc0832 yaml conversion.
dt-bindings: iio: adc: ti,adc128s052 yaml conversion.
dt-bindings: iio: adc: ti,ads8344 yaml conversion
dt-bindings: iio: adc: ti,tlc4541 binding conversion
dt-bindings: iio: adc: microchip,mcp3201 yaml conversion.
Krzysztof Kozlowski (18):
iio: accel: bma180: Simplify with dev_err_probe()
iio: accel: mma8452: Simplify with dev_err_probe()
iio: adc: envelope-detector: Simplify with dev_err_probe()
iio: adc: exynos_adc: Simplify with dev_err_probe()
iio: adc: ltc2497: Simplify with dev_err_probe()
iio: adc: meson_saradc: Simplify with dev_err_probe()
iio: adc: rcar-gyroadc: Simplify with dev_err_probe()
iio: adc: stm32: Simplify with dev_err_probe()
iio: afe: iio-rescale: Simplify with dev_err_probe()
iio: amplifiers: hmc425a: Simplify with dev_err_probe()
iio: chemical: scd30: Simplify with dev_err_probe()
iio: dac: dpot-dac: Simplify with dev_err_probe()
iio: imu: inv_mpu6050: Simplify with dev_err_probe()
iio: light: isl29018: Simplify with dev_err_probe()
iio: light: tsl2772: Simplify with dev_err_probe()
iio: magnetometer: ak8974: Simplify with dev_err_probe()
iio: magnetometer: mag3110: Simplify with dev_err_probe()
iio: multiplexer: iio-mux: Simplify with dev_err_probe()
Lars-Peter Clausen (1):
iio: trigger: make stub functions static inline
Matt Ranostay (6):
iio: add IIO_MOD_O2 modifier
iio: chemical: atlas-ezo-sensor: add support for O2 sensor
dt-bindings: iio: chemical: add O2 EZO module documentation
iio: health: max30102: update author's email
dt-bindings: iio: chemical: add Atlas EZO Humidity module documentation
iio: chemical: atlas-ezo-sensor: add humidity sensor support
Nishant Malpani (3):
iio: gyro: Add driver support for ADXRS290
dt-bindings: iio: gyro: Add DT binding doc for ADXRS290
iio: gyro: adxrs290: Insert missing mutex initialization call
Phil Reid (1):
dt-bindings: iio: adc: tlc4541 - recover accidentally dropped binding doc
Randy Dunlap (1):
platform_data: ad7793.h: drop a duplicated word
Rikard Falkeborn (1):
iio: dac: ad5686: Constify static struct iio_chan_spec
Stefan Popa (2):
iio: adxl372_i2c: Add OF device ID table
iio: accel: adxl372: Add support for FIFO peak mode
Stephen Boyd (3):
iio: sx9310: Drop channel_users[]
iio: sx9310: Enable vdd and svdd regulators at probe
iio: sx9310: Use irq trigger flags from firmware
Tian Tao (1):
iio: adc: adi-axi-adc: Use kobj_to_dev() instead of container_of()
Vincent Whitchurch (1):
iio: dac: dac5571: Support powerdown for multi-channel
kernel test robot (1):
drivers/iio/humidity/hdc2010.c:305:2-3: Unneeded semicolon
Documentation/ABI/testing/sysfs-bus-iio | 82 ++-
.../ABI/testing/sysfs-bus-iio-accel-adxl372 | 7 +
.../ABI/testing/sysfs-bus-iio-humidity-hdc2010 | 9 +
.../devicetree/bindings/iio/adc/lltc,ltc2497.yaml | 44 ++
.../devicetree/bindings/iio/adc/ltc2497.txt | 13 -
.../devicetree/bindings/iio/adc/max11100.txt | 18 -
.../devicetree/bindings/iio/adc/max1118.txt | 21 -
.../devicetree/bindings/iio/adc/max9611.txt | 27 -
.../bindings/iio/adc/maxim,max11100.yaml | 49 ++
.../devicetree/bindings/iio/adc/maxim,max1118.yaml | 62 ++
.../devicetree/bindings/iio/adc/maxim,max9611.yaml | 51 ++
.../devicetree/bindings/iio/adc/mcp320x.txt | 57 --
.../devicetree/bindings/iio/adc/mcp3422.txt | 19 -
.../bindings/iio/adc/microchip,mcp3201.yaml | 77 ++
.../devicetree/bindings/iio/adc/ti,adc0832.yaml | 56 ++
.../devicetree/bindings/iio/adc/ti,adc108s102.yaml | 47 ++
.../devicetree/bindings/iio/adc/ti,adc128s052.yaml | 59 ++
.../devicetree/bindings/iio/adc/ti,adc161s626.yaml | 51 ++
.../devicetree/bindings/iio/adc/ti,ads8344.yaml | 51 ++
.../devicetree/bindings/iio/adc/ti,tlc4541.yaml | 52 ++
.../devicetree/bindings/iio/adc/ti-adc0832.txt | 19 -
.../devicetree/bindings/iio/adc/ti-adc108s102.txt | 18 -
.../devicetree/bindings/iio/adc/ti-adc128s052.txt | 25 -
.../devicetree/bindings/iio/adc/ti-adc161s626.txt | 18 -
.../devicetree/bindings/iio/adc/ti-ads8344.txt | 19 -
.../bindings/iio/chemical/atlas,sensor.yaml | 4 +
.../devicetree/bindings/iio/dac/lltc,ltc2632.yaml | 77 ++
.../devicetree/bindings/iio/dac/ltc2632.txt | 49 --
.../bindings/iio/gyroscope/adi,adxrs290.yaml | 53 ++
.../bindings/iio/humidity/ti,hdc2010.yaml | 45 ++
.../devicetree/bindings/iio/light/ams,as73211.yaml | 54 ++
.../bindings/iio/proximity/semtech,sx9310.yaml | 65 ++
.../devicetree/bindings/trivial-devices.yaml | 16 +
MAINTAINERS | 14 +
drivers/iio/accel/adxl372.c | 311 +++++++-
drivers/iio/accel/adxl372_i2c.c | 8 +
drivers/iio/accel/adxl372_spi.c | 4 +-
drivers/iio/accel/bma180.c | 20 +-
drivers/iio/accel/bma220_spi.c | 85 ++-
drivers/iio/accel/mma8452.c | 20 +-
drivers/iio/adc/Kconfig | 2 +-
drivers/iio/adc/adi-axi-adc.c | 2 +-
drivers/iio/adc/axp20x_adc.c | 14 +-
drivers/iio/adc/bcm_iproc_adc.c | 4 +-
drivers/iio/adc/envelope-detector.c | 16 +-
drivers/iio/adc/exynos_adc.c | 10 +-
drivers/iio/adc/ltc2497-core.c | 10 +-
drivers/iio/adc/meson_saradc.c | 7 +-
drivers/iio/adc/rcar-gyroadc.c | 9 +-
drivers/iio/adc/stm32-adc-core.c | 75 +-
drivers/iio/adc/stm32-adc.c | 10 +-
drivers/iio/adc/stm32-dfsdm-adc.c | 10 +-
drivers/iio/adc/stm32-dfsdm-core.c | 9 +-
drivers/iio/adc/ti-adc081c.c | 24 +-
drivers/iio/adc/ti-adc108s102.c | 5 +-
drivers/iio/adc/ti-adc128s052.c | 3 +-
drivers/iio/afe/iio-rescale.c | 8 +-
drivers/iio/amplifiers/Kconfig | 1 +
drivers/iio/amplifiers/hmc425a.c | 9 +-
drivers/iio/buffer/industrialio-buffer-dmaengine.c | 6 +-
drivers/iio/chemical/atlas-ezo-sensor.c | 88 ++-
drivers/iio/chemical/scd30_core.c | 9 +-
drivers/iio/dac/ad5686.c | 8 +-
drivers/iio/dac/ad5686.h | 2 +-
drivers/iio/dac/dpot-dac.c | 16 +-
drivers/iio/dac/stm32-dac-core.c | 5 +-
drivers/iio/dac/ti-dac5571.c | 29 +-
drivers/iio/frequency/ad9523.c | 60 +-
drivers/iio/gyro/Kconfig | 10 +
drivers/iio/gyro/Makefile | 1 +
drivers/iio/gyro/adxrs290.c | 446 ++++++++++++
drivers/iio/health/max30102.c | 4 +-
drivers/iio/humidity/Kconfig | 10 +
drivers/iio/humidity/Makefile | 1 +
drivers/iio/humidity/hdc2010.c | 353 +++++++++
drivers/iio/iio_core_trigger.h | 4 +-
drivers/iio/imu/inv_mpu6050/inv_mpu_core.c | 20 +-
drivers/iio/industrialio-core.c | 1 +
drivers/iio/light/Kconfig | 15 +
drivers/iio/light/Makefile | 1 +
drivers/iio/light/as73211.c | 801 +++++++++++++++++++++
drivers/iio/light/isl29018.c | 9 +-
drivers/iio/light/tsl2772.c | 10 +-
drivers/iio/magnetometer/ak8974.c | 11 +-
drivers/iio/magnetometer/mag3110.c | 20 +-
drivers/iio/multiplexer/iio-mux.c | 8 +-
drivers/iio/proximity/sx9310.c | 420 +++++------
drivers/iio/temperature/mlx90632.c | 274 ++++++-
drivers/staging/iio/Documentation/overview.txt | 4 +-
drivers/staging/iio/frequency/ad9834.c | 1 -
include/linux/platform_data/ad7793.h | 2 +-
include/uapi/linux/iio/types.h | 1 +
tools/iio/iio_event_monitor.c | 2 +
93 files changed, 3696 insertions(+), 960 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-accel-adxl372
create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-humidity-hdc2010
create mode 100644 Documentation/devicetree/bindings/iio/adc/lltc,ltc2497.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/adc/ltc2497.txt
delete mode 100644 Documentation/devicetree/bindings/iio/adc/max11100.txt
delete mode 100644 Documentation/devicetree/bindings/iio/adc/max1118.txt
delete mode 100644 Documentation/devicetree/bindings/iio/adc/max9611.txt
create mode 100644 Documentation/devicetree/bindings/iio/adc/maxim,max11100.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/maxim,max1118.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/maxim,max9611.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/adc/mcp320x.txt
delete mode 100644 Documentation/devicetree/bindings/iio/adc/mcp3422.txt
create mode 100644 Documentation/devicetree/bindings/iio/adc/microchip,mcp3201.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,adc0832.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,adc128s052.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,adc161s626.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads8344.yaml
create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,tlc4541.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/adc/ti-adc0832.txt
delete mode 100644 Documentation/devicetree/bindings/iio/adc/ti-adc108s102.txt
delete mode 100644 Documentation/devicetree/bindings/iio/adc/ti-adc128s052.txt
delete mode 100644 Documentation/devicetree/bindings/iio/adc/ti-adc161s626.txt
delete mode 100644 Documentation/devicetree/bindings/iio/adc/ti-ads8344.txt
create mode 100644 Documentation/devicetree/bindings/iio/dac/lltc,ltc2632.yaml
delete mode 100644 Documentation/devicetree/bindings/iio/dac/ltc2632.txt
create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/adi,adxrs290.yaml
create mode 100644 Documentation/devicetree/bindings/iio/humidity/ti,hdc2010.yaml
create mode 100644 Documentation/devicetree/bindings/iio/light/ams,as73211.yaml
create mode 100644 Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
create mode 100644 drivers/iio/gyro/adxrs290.c
create mode 100644 drivers/iio/humidity/hdc2010.c
create mode 100644 drivers/iio/light/as73211.c
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PULL] IIO: First set of new device support etc for the 5.10 cycle
2020-09-06 12:39 [PULL] IIO: First set of new device support etc for the 5.10 cycle Jonathan Cameron
@ 2020-09-06 14:56 ` Greg KH
2020-09-06 14:57 ` Greg KH
0 siblings, 1 reply; 4+ messages in thread
From: Greg KH @ 2020-09-06 14:56 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio
On Sun, Sep 06, 2020 at 01:39:58PM +0100, Jonathan Cameron wrote:
> The following changes since commit bc752d2f345bf55d71b3422a6a24890ea03168dc:
>
> staging: hikey9xx: Kconfig: add regulator dependency (2020-08-18 19:15:47 +0200)
>
> are available in the Git repository at:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.10a
Pulled and pushed out, thanks.
greg k-h
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PULL] IIO: First set of new device support etc for the 5.10 cycle
2020-09-06 14:56 ` Greg KH
@ 2020-09-06 14:57 ` Greg KH
2020-09-06 15:11 ` Jonathan Cameron
0 siblings, 1 reply; 4+ messages in thread
From: Greg KH @ 2020-09-06 14:57 UTC (permalink / raw)
To: Jonathan Cameron; +Cc: linux-iio
On Sun, Sep 06, 2020 at 04:56:28PM +0200, Greg KH wrote:
> On Sun, Sep 06, 2020 at 01:39:58PM +0100, Jonathan Cameron wrote:
> > The following changes since commit bc752d2f345bf55d71b3422a6a24890ea03168dc:
> >
> > staging: hikey9xx: Kconfig: add regulator dependency (2020-08-18 19:15:47 +0200)
> >
> > are available in the Git repository at:
> >
> > https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.10a
>
> Pulled and pushed out, thanks.
Oops, spoke too soon, I get the following error when trying to push:
Verifying "Fixes:"...
Commit: 1bebdcb928eb ("drivers/iio/humidity/hdc2010.c:305:2-3: Unneeded semicolon")
Fixes tag: Fixes: 016b57638b47 ("iio: humidity: Add TI HDC20x0 support")
Has these problem(s):
- Target SHA1 does not exist
Can you fix this up and send a new pull request?
thanks,
greg k-h
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PULL] IIO: First set of new device support etc for the 5.10 cycle
2020-09-06 14:57 ` Greg KH
@ 2020-09-06 15:11 ` Jonathan Cameron
0 siblings, 0 replies; 4+ messages in thread
From: Jonathan Cameron @ 2020-09-06 15:11 UTC (permalink / raw)
To: Greg KH; +Cc: linux-iio
On Sun, 6 Sep 2020 16:57:41 +0200
Greg KH <gregkh@linuxfoundation.org> wrote:
> On Sun, Sep 06, 2020 at 04:56:28PM +0200, Greg KH wrote:
> > On Sun, Sep 06, 2020 at 01:39:58PM +0100, Jonathan Cameron wrote:
> > > The following changes since commit bc752d2f345bf55d71b3422a6a24890ea03168dc:
> > >
> > > staging: hikey9xx: Kconfig: add regulator dependency (2020-08-18 19:15:47 +0200)
> > >
> > > are available in the Git repository at:
> > >
> > > https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-5.10a
> >
> > Pulled and pushed out, thanks.
>
> Oops, spoke too soon, I get the following error when trying to push:
> Verifying "Fixes:"...
>
> Commit: 1bebdcb928eb ("drivers/iio/humidity/hdc2010.c:305:2-3: Unneeded semicolon")
> Fixes tag: Fixes: 016b57638b47 ("iio: humidity: Add TI HDC20x0 support")
> Has these problem(s):
> - Target SHA1 does not exist
>
> Can you fix this up and send a new pull request?
Gah! I forgot to check. Sorry about that. New pull in a few moments.
At least it was the top patch on the tree.
Jonathan
>
> thanks,
>
> greg k-h
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-09-06 15:11 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-06 12:39 [PULL] IIO: First set of new device support etc for the 5.10 cycle Jonathan Cameron
2020-09-06 14:56 ` Greg KH
2020-09-06 14:57 ` Greg KH
2020-09-06 15:11 ` Jonathan Cameron
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.