From: Andre Przywara <andre.przywara@arm.com> To: soc@kernel.org Cc: Rob Herring <robh@kernel.org>, devicetree@vger.kernel.org, Wei Xu <xuwei5@hisilicon.com>, Chanho Min <chanho.min@lge.com>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v3 1/6] ARM: dts: hisilicon: Fix SP804 users Date: Mon, 7 Sep 2020 13:18:26 +0100 [thread overview] Message-ID: <20200907121831.242281-2-andre.przywara@arm.com> (raw) In-Reply-To: <20200907121831.242281-1-andre.przywara@arm.com> The SP804 binding only specifies one or three clocks, but does not allow just two clocks. The HiSi 3620 .dtsi specified two clocks for the two timers, plus gave one "apb_pclk" clock-name to appease the primecell bus driver. Extend the clocks by duplicating the first clock to the end of the clock list, and add two dummy clock-names to make the primecell driver happy. I don't know what the real APB clock for the IP is, but with the current DT the first timer clock was used for that, so this change keeps the current status. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- arch/arm/boot/dts/hi3620.dtsi | 30 ++++++++++++++++++++---------- arch/arm/boot/dts/hip04.dtsi | 4 ++-- 2 files changed, 22 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index f0af1bf2b4d8..355175b25fd6 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -111,8 +111,10 @@ reg = <0x800000 0x1000>; /* timer00 & timer01 */ interrupts = <0 0 4>, <0 1 4>; - clocks = <&clock HI3620_TIMER0_MUX>, <&clock HI3620_TIMER1_MUX>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_TIMER0_MUX>, + <&clock HI3620_TIMER1_MUX>, + <&clock HI3620_TIMER0_MUX>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; @@ -121,8 +123,10 @@ reg = <0x801000 0x1000>; /* timer10 & timer11 */ interrupts = <0 2 4>, <0 3 4>; - clocks = <&clock HI3620_TIMER2_MUX>, <&clock HI3620_TIMER3_MUX>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_TIMER2_MUX>, + <&clock HI3620_TIMER3_MUX>, + <&clock HI3620_TIMER2_MUX>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; @@ -131,8 +135,10 @@ reg = <0xa01000 0x1000>; /* timer20 & timer21 */ interrupts = <0 4 4>, <0 5 4>; - clocks = <&clock HI3620_TIMER4_MUX>, <&clock HI3620_TIMER5_MUX>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_TIMER4_MUX>, + <&clock HI3620_TIMER5_MUX>, + <&clock HI3620_TIMER4_MUX>; + clock-names = "timer0lck", "timer1clk", "apb_pclk"; status = "disabled"; }; @@ -141,8 +147,10 @@ reg = <0xa02000 0x1000>; /* timer30 & timer31 */ interrupts = <0 6 4>, <0 7 4>; - clocks = <&clock HI3620_TIMER6_MUX>, <&clock HI3620_TIMER7_MUX>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_TIMER6_MUX>, + <&clock HI3620_TIMER7_MUX>, + <&clock HI3620_TIMER6_MUX>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; @@ -151,8 +159,10 @@ reg = <0xa03000 0x1000>; /* timer40 & timer41 */ interrupts = <0 96 4>, <0 97 4>; - clocks = <&clock HI3620_TIMER8_MUX>, <&clock HI3620_TIMER9_MUX>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_TIMER8_MUX>, + <&clock HI3620_TIMER9_MUX>, + <&clock HI3620_TIMER8_MUX>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi index 4263a9339c2e..f5871b1d1ec4 100644 --- a/arch/arm/boot/dts/hip04.dtsi +++ b/arch/arm/boot/dts/hip04.dtsi @@ -226,8 +226,8 @@ compatible = "arm,sp804", "arm,primecell"; reg = <0x3000000 0x1000>; interrupts = <0 224 4>; - clocks = <&clk_50m>, <&clk_50m>; - clock-names = "apb_pclk"; + clocks = <&clk_50m>, <&clk_50m>, <&clk_50m>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; }; arm-pmu { -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Andre Przywara <andre.przywara@arm.com> To: soc@kernel.org Cc: Rob Herring <robh@kernel.org>, devicetree@vger.kernel.org, Chanho Min <chanho.min@lge.com>, linux-kernel@vger.kernel.org, Wei Xu <xuwei5@hisilicon.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 1/6] ARM: dts: hisilicon: Fix SP804 users Date: Mon, 7 Sep 2020 13:18:26 +0100 [thread overview] Message-ID: <20200907121831.242281-2-andre.przywara@arm.com> (raw) In-Reply-To: <20200907121831.242281-1-andre.przywara@arm.com> The SP804 binding only specifies one or three clocks, but does not allow just two clocks. The HiSi 3620 .dtsi specified two clocks for the two timers, plus gave one "apb_pclk" clock-name to appease the primecell bus driver. Extend the clocks by duplicating the first clock to the end of the clock list, and add two dummy clock-names to make the primecell driver happy. I don't know what the real APB clock for the IP is, but with the current DT the first timer clock was used for that, so this change keeps the current status. Signed-off-by: Andre Przywara <andre.przywara@arm.com> --- arch/arm/boot/dts/hi3620.dtsi | 30 ++++++++++++++++++++---------- arch/arm/boot/dts/hip04.dtsi | 4 ++-- 2 files changed, 22 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index f0af1bf2b4d8..355175b25fd6 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -111,8 +111,10 @@ reg = <0x800000 0x1000>; /* timer00 & timer01 */ interrupts = <0 0 4>, <0 1 4>; - clocks = <&clock HI3620_TIMER0_MUX>, <&clock HI3620_TIMER1_MUX>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_TIMER0_MUX>, + <&clock HI3620_TIMER1_MUX>, + <&clock HI3620_TIMER0_MUX>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; @@ -121,8 +123,10 @@ reg = <0x801000 0x1000>; /* timer10 & timer11 */ interrupts = <0 2 4>, <0 3 4>; - clocks = <&clock HI3620_TIMER2_MUX>, <&clock HI3620_TIMER3_MUX>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_TIMER2_MUX>, + <&clock HI3620_TIMER3_MUX>, + <&clock HI3620_TIMER2_MUX>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; @@ -131,8 +135,10 @@ reg = <0xa01000 0x1000>; /* timer20 & timer21 */ interrupts = <0 4 4>, <0 5 4>; - clocks = <&clock HI3620_TIMER4_MUX>, <&clock HI3620_TIMER5_MUX>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_TIMER4_MUX>, + <&clock HI3620_TIMER5_MUX>, + <&clock HI3620_TIMER4_MUX>; + clock-names = "timer0lck", "timer1clk", "apb_pclk"; status = "disabled"; }; @@ -141,8 +147,10 @@ reg = <0xa02000 0x1000>; /* timer30 & timer31 */ interrupts = <0 6 4>, <0 7 4>; - clocks = <&clock HI3620_TIMER6_MUX>, <&clock HI3620_TIMER7_MUX>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_TIMER6_MUX>, + <&clock HI3620_TIMER7_MUX>, + <&clock HI3620_TIMER6_MUX>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; @@ -151,8 +159,10 @@ reg = <0xa03000 0x1000>; /* timer40 & timer41 */ interrupts = <0 96 4>, <0 97 4>; - clocks = <&clock HI3620_TIMER8_MUX>, <&clock HI3620_TIMER9_MUX>; - clock-names = "apb_pclk"; + clocks = <&clock HI3620_TIMER8_MUX>, + <&clock HI3620_TIMER9_MUX>, + <&clock HI3620_TIMER8_MUX>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi index 4263a9339c2e..f5871b1d1ec4 100644 --- a/arch/arm/boot/dts/hip04.dtsi +++ b/arch/arm/boot/dts/hip04.dtsi @@ -226,8 +226,8 @@ compatible = "arm,sp804", "arm,primecell"; reg = <0x3000000 0x1000>; interrupts = <0 224 4>; - clocks = <&clk_50m>, <&clk_50m>; - clock-names = "apb_pclk"; + clocks = <&clk_50m>, <&clk_50m>, <&clk_50m>; + clock-names = "timer0clk", "timer1clk", "apb_pclk"; }; arm-pmu { -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-07 12:23 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-07 12:18 [PATCH v3 0/6] ARM/arm64: dts: Fix SP804/SP805 users Andre Przywara 2020-09-07 12:18 ` Andre Przywara 2020-09-07 12:18 ` Andre Przywara [this message] 2020-09-07 12:18 ` [PATCH v3 1/6] ARM: dts: hisilicon: Fix SP804 users Andre Przywara 2020-09-16 1:44 ` Wei Xu 2020-09-16 1:44 ` Wei Xu 2020-09-07 12:18 ` [PATCH v3 2/6] ARM: dts: nspire: " Andre Przywara 2020-09-07 12:18 ` Andre Przywara 2020-09-07 12:18 ` [PATCH v3 3/6] arm64: dts: lg: " Andre Przywara 2020-09-07 12:18 ` Andre Przywara 2020-09-07 12:18 ` [PATCH v3 4/6] arm64: dts: hisilicon: Fix SP805 clocks Andre Przywara 2020-09-07 12:18 ` Andre Przywara 2020-09-16 1:45 ` Wei Xu 2020-09-16 1:45 ` Wei Xu 2020-09-07 12:18 ` [PATCH v3 5/6] arm64: dts: lg: " Andre Przywara 2020-09-07 12:18 ` Andre Przywara 2020-09-07 12:18 ` [PATCH v3 6/6] ARM: dts: hisilicon: " Andre Przywara 2020-09-07 12:18 ` Andre Przywara 2020-09-16 1:42 ` Wei Xu 2020-09-16 1:42 ` Wei Xu 2020-10-03 19:57 ` [PATCH v3 0/6] ARM/arm64: dts: Fix SP804/SP805 users Olof Johansson 2020-10-03 19:57 ` Olof Johansson
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200907121831.242281-2-andre.przywara@arm.com \ --to=andre.przywara@arm.com \ --cc=chanho.min@lge.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=robh@kernel.org \ --cc=soc@kernel.org \ --cc=xuwei5@hisilicon.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.