* [PATCH 00/11] ARM: dts: s3c: dtschema fixes
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Sylwester Nawrocki, Bartlomiej Zolnierkiewicz, Tomasz Figa,
Marek Szyprowski
Hi,
This is last serie of big dtschema cleanups for Samsung DTS. It fixes
almost all dtschema violations, except:
s3c6410-mini6410.dt.yaml: srom-cs1-bus@18000000: ethernet@18000000:reg:0: [402653184, 2, 402653188, 2] is too long
which is similar to the case with SMDK5410 (Exynos5410).
The patchset was not tested on HW.
Best regards,
Krzysztof
Krzysztof Kozlowski (11):
ARM: dts: s5pv210: Correct ethernet unit address in SMDKV210
ARM: dts: s3c6410: move fixed clocks under root node in Mini6410
ARM: dts: s3c6410: move fixed clocks under root node in SMDK6410
ARM: dts: s3c6410: align node SROM bus node name with dtschema in
Mini6410
ARM: dts: s3c6410: align node SROM bus node name with dtschema in
SMDK6410
ARM: dts: s3c6410: remove additional CPU compatible
ARM: dts: s3c24xx: fix number of PWM cells
ARM: dts: s3c24xx: override nods by label
ARM: dts: s3c24xx: align PWM/timer node name with dtschema
ARM: dts: s3c24xx: add address to CPU node
ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416
arch/arm/boot/dts/s3c2416-smdk2416.dts | 17 ++--
arch/arm/boot/dts/s3c2416.dtsi | 111 +++++++++++++------------
arch/arm/boot/dts/s3c24xx.dtsi | 24 +++---
arch/arm/boot/dts/s3c6410-mini6410.dts | 32 +++----
arch/arm/boot/dts/s3c6410-smdk6410.dts | 32 +++----
arch/arm/boot/dts/s3c64xx.dtsi | 2 +-
arch/arm/boot/dts/s5pv210-smdkv210.dts | 2 +-
7 files changed, 101 insertions(+), 119 deletions(-)
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 01/11] ARM: dts: s5pv210: Correct ethernet unit address in SMDKV210
2020-09-07 18:33 ` Krzysztof Kozlowski
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki,
Tomasz Figa
The SROM bank 5 is at address 0xa8000000, just like the one put in "reg"
property of ethernet node. Fix the unit address of ethernet node.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s5pv210-smdkv210.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts
index 1e1570d66d89..7459e41e8ef1 100644
--- a/arch/arm/boot/dts/s5pv210-smdkv210.dts
+++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts
@@ -39,7 +39,7 @@
clock-frequency = <32768>;
};
- ethernet@18000000 {
+ ethernet@a8000000 {
compatible = "davicom,dm9000";
reg = <0xA8000000 0x2 0xA8000002 0x2>;
interrupt-parent = <&gph1>;
--
2.17.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 01/11] ARM: dts: s5pv210: Correct ethernet unit address in SMDKV210
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Sylwester Nawrocki, Bartlomiej Zolnierkiewicz, Tomasz Figa,
Marek Szyprowski
The SROM bank 5 is at address 0xa8000000, just like the one put in "reg"
property of ethernet node. Fix the unit address of ethernet node.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s5pv210-smdkv210.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts
index 1e1570d66d89..7459e41e8ef1 100644
--- a/arch/arm/boot/dts/s5pv210-smdkv210.dts
+++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts
@@ -39,7 +39,7 @@
clock-frequency = <32768>;
};
- ethernet@18000000 {
+ ethernet@a8000000 {
compatible = "davicom,dm9000";
reg = <0xA8000000 0x2 0xA8000002 0x2>;
interrupt-parent = <&gph1>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 28+ messages in thread
* Re: [PATCH 01/11] ARM: dts: s5pv210: Correct ethernet unit address in SMDKV210
2020-09-07 18:33 ` Krzysztof Kozlowski
@ 2020-09-11 14:36 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-11 14:36 UTC (permalink / raw)
To: Kukjin Kim, Rob Herring, Lihua Yao, linux-arm-kernel,
linux-samsung-soc, devicetree, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki,
Tomasz Figa
On Mon, Sep 07, 2020 at 08:33:03PM +0200, Krzysztof Kozlowski wrote:
> The SROM bank 5 is at address 0xa8000000, just like the one put in "reg"
> property of ethernet node. Fix the unit address of ethernet node.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> arch/arm/boot/dts/s5pv210-smdkv210.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Applied.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 01/11] ARM: dts: s5pv210: Correct ethernet unit address in SMDKV210
@ 2020-09-11 14:36 ` Krzysztof Kozlowski
0 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-11 14:36 UTC (permalink / raw)
To: Kukjin Kim, Rob Herring, Lihua Yao, linux-arm-kernel,
linux-samsung-soc, devicetree, linux-kernel
Cc: Sylwester Nawrocki, Bartlomiej Zolnierkiewicz, Tomasz Figa,
Marek Szyprowski
On Mon, Sep 07, 2020 at 08:33:03PM +0200, Krzysztof Kozlowski wrote:
> The SROM bank 5 is at address 0xa8000000, just like the one put in "reg"
> property of ethernet node. Fix the unit address of ethernet node.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> ---
> arch/arm/boot/dts/s5pv210-smdkv210.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Applied.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 28+ messages in thread
* [PATCH 02/11] ARM: dts: s3c6410: move fixed clocks under root node in Mini6410
2020-09-07 18:33 ` Krzysztof Kozlowski
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki,
Tomasz Figa
The fixed clocks are kept under dedicated 'clocks' node but this causes
multiple dtschema warnings:
clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
clocks: #size-cells:0:0: 0 is not one of [1, 2]
clocks: oscillator@0:reg:0: [0] is too short
clocks: oscillator@1:reg:0: [1] is too short
clocks: 'ranges' is a required property
oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c6410-mini6410.dts | 30 ++++++++++----------------
1 file changed, 11 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
index 1aeac33b0d34..75067dbcf7e8 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -28,26 +28,18 @@
bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- fin_pll: oscillator@0 {
- compatible = "fixed-clock";
- reg = <0>;
- clock-frequency = <12000000>;
- clock-output-names = "fin_pll";
- #clock-cells = <0>;
- };
+ fin_pll: oscillator-0 {
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ clock-output-names = "fin_pll";
+ #clock-cells = <0>;
+ };
- xusbxti: oscillator@1 {
- compatible = "fixed-clock";
- reg = <1>;
- clock-output-names = "xusbxti";
- clock-frequency = <48000000>;
- #clock-cells = <0>;
- };
+ xusbxti: oscillator-1 {
+ compatible = "fixed-clock";
+ clock-output-names = "xusbxti";
+ clock-frequency = <48000000>;
+ #clock-cells = <0>;
};
srom-cs1@18000000 {
--
2.17.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 02/11] ARM: dts: s3c6410: move fixed clocks under root node in Mini6410
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Sylwester Nawrocki, Bartlomiej Zolnierkiewicz, Tomasz Figa,
Marek Szyprowski
The fixed clocks are kept under dedicated 'clocks' node but this causes
multiple dtschema warnings:
clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
clocks: #size-cells:0:0: 0 is not one of [1, 2]
clocks: oscillator@0:reg:0: [0] is too short
clocks: oscillator@1:reg:0: [1] is too short
clocks: 'ranges' is a required property
oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c6410-mini6410.dts | 30 ++++++++++----------------
1 file changed, 11 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
index 1aeac33b0d34..75067dbcf7e8 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -28,26 +28,18 @@
bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- fin_pll: oscillator@0 {
- compatible = "fixed-clock";
- reg = <0>;
- clock-frequency = <12000000>;
- clock-output-names = "fin_pll";
- #clock-cells = <0>;
- };
+ fin_pll: oscillator-0 {
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ clock-output-names = "fin_pll";
+ #clock-cells = <0>;
+ };
- xusbxti: oscillator@1 {
- compatible = "fixed-clock";
- reg = <1>;
- clock-output-names = "xusbxti";
- clock-frequency = <48000000>;
- #clock-cells = <0>;
- };
+ xusbxti: oscillator-1 {
+ compatible = "fixed-clock";
+ clock-output-names = "xusbxti";
+ clock-frequency = <48000000>;
+ #clock-cells = <0>;
};
srom-cs1@18000000 {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 03/11] ARM: dts: s3c6410: move fixed clocks under root node in SMDK6410
2020-09-07 18:33 ` Krzysztof Kozlowski
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki,
Tomasz Figa
The fixed clocks are kept under dedicated 'clocks' node but this causes
multiple dtschema warnings:
clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
clocks: #size-cells:0:0: 0 is not one of [1, 2]
clocks: oscillator@0:reg:0: [0] is too short
clocks: oscillator@1:reg:0: [1] is too short
clocks: 'ranges' is a required property
oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c6410-smdk6410.dts | 30 ++++++++++----------------
1 file changed, 11 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts
index 96267f5f02a8..74379061a11a 100644
--- a/arch/arm/boot/dts/s3c6410-smdk6410.dts
+++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts
@@ -28,26 +28,18 @@
bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- fin_pll: oscillator@0 {
- compatible = "fixed-clock";
- reg = <0>;
- clock-frequency = <12000000>;
- clock-output-names = "fin_pll";
- #clock-cells = <0>;
- };
+ fin_pll: oscillator-0 {
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ clock-output-names = "fin_pll";
+ #clock-cells = <0>;
+ };
- xusbxti: oscillator@1 {
- compatible = "fixed-clock";
- reg = <1>;
- clock-output-names = "xusbxti";
- clock-frequency = <48000000>;
- #clock-cells = <0>;
- };
+ xusbxti: oscillator-1 {
+ compatible = "fixed-clock";
+ clock-output-names = "xusbxti";
+ clock-frequency = <48000000>;
+ #clock-cells = <0>;
};
srom-cs1@18000000 {
--
2.17.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 03/11] ARM: dts: s3c6410: move fixed clocks under root node in SMDK6410
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Sylwester Nawrocki, Bartlomiej Zolnierkiewicz, Tomasz Figa,
Marek Szyprowski
The fixed clocks are kept under dedicated 'clocks' node but this causes
multiple dtschema warnings:
clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
clocks: #size-cells:0:0: 0 is not one of [1, 2]
clocks: oscillator@0:reg:0: [0] is too short
clocks: oscillator@1:reg:0: [1] is too short
clocks: 'ranges' is a required property
oscillator@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c6410-smdk6410.dts | 30 ++++++++++----------------
1 file changed, 11 insertions(+), 19 deletions(-)
diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts
index 96267f5f02a8..74379061a11a 100644
--- a/arch/arm/boot/dts/s3c6410-smdk6410.dts
+++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts
@@ -28,26 +28,18 @@
bootargs = "console=ttySAC0,115200n8 earlyprintk rootwait root=/dev/mmcblk0p1";
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- fin_pll: oscillator@0 {
- compatible = "fixed-clock";
- reg = <0>;
- clock-frequency = <12000000>;
- clock-output-names = "fin_pll";
- #clock-cells = <0>;
- };
+ fin_pll: oscillator-0 {
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ clock-output-names = "fin_pll";
+ #clock-cells = <0>;
+ };
- xusbxti: oscillator@1 {
- compatible = "fixed-clock";
- reg = <1>;
- clock-output-names = "xusbxti";
- clock-frequency = <48000000>;
- #clock-cells = <0>;
- };
+ xusbxti: oscillator-1 {
+ compatible = "fixed-clock";
+ clock-output-names = "xusbxti";
+ clock-frequency = <48000000>;
+ #clock-cells = <0>;
};
srom-cs1@18000000 {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 04/11] ARM: dts: s3c6410: align node SROM bus node name with dtschema in Mini6410
2020-09-07 18:33 ` Krzysztof Kozlowski
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki,
Tomasz Figa
The SROM controller is modeled with a bus so align the device node name
with dtschema to fix warning:
srom-cs1@18000000: $nodename:0: 'srom-cs1@18000000'
does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c6410-mini6410.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
index 75067dbcf7e8..285555b9ed94 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -42,7 +42,7 @@
#clock-cells = <0>;
};
- srom-cs1@18000000 {
+ srom-cs1-bus@18000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
--
2.17.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 04/11] ARM: dts: s3c6410: align node SROM bus node name with dtschema in Mini6410
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Sylwester Nawrocki, Bartlomiej Zolnierkiewicz, Tomasz Figa,
Marek Szyprowski
The SROM controller is modeled with a bus so align the device node name
with dtschema to fix warning:
srom-cs1@18000000: $nodename:0: 'srom-cs1@18000000'
does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c6410-mini6410.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/s3c6410-mini6410.dts b/arch/arm/boot/dts/s3c6410-mini6410.dts
index 75067dbcf7e8..285555b9ed94 100644
--- a/arch/arm/boot/dts/s3c6410-mini6410.dts
+++ b/arch/arm/boot/dts/s3c6410-mini6410.dts
@@ -42,7 +42,7 @@
#clock-cells = <0>;
};
- srom-cs1@18000000 {
+ srom-cs1-bus@18000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 05/11] ARM: dts: s3c6410: align node SROM bus node name with dtschema in SMDK6410
2020-09-07 18:33 ` Krzysztof Kozlowski
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki,
Tomasz Figa
The SROM controller is modeled with a bus so align the device node name
with dtschema to fix warning:
srom-cs1@18000000: $nodename:0: 'srom-cs1@18000000'
does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c6410-smdk6410.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts
index 74379061a11a..69c9ec4cf381 100644
--- a/arch/arm/boot/dts/s3c6410-smdk6410.dts
+++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts
@@ -42,7 +42,7 @@
#clock-cells = <0>;
};
- srom-cs1@18000000 {
+ srom-cs1-bus@18000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
--
2.17.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 05/11] ARM: dts: s3c6410: align node SROM bus node name with dtschema in SMDK6410
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Sylwester Nawrocki, Bartlomiej Zolnierkiewicz, Tomasz Figa,
Marek Szyprowski
The SROM controller is modeled with a bus so align the device node name
with dtschema to fix warning:
srom-cs1@18000000: $nodename:0: 'srom-cs1@18000000'
does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c6410-smdk6410.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/s3c6410-smdk6410.dts b/arch/arm/boot/dts/s3c6410-smdk6410.dts
index 74379061a11a..69c9ec4cf381 100644
--- a/arch/arm/boot/dts/s3c6410-smdk6410.dts
+++ b/arch/arm/boot/dts/s3c6410-smdk6410.dts
@@ -42,7 +42,7 @@
#clock-cells = <0>;
};
- srom-cs1@18000000 {
+ srom-cs1-bus@18000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 06/11] ARM: dts: s3c6410: remove additional CPU compatible
2020-09-07 18:33 ` Krzysztof Kozlowski
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki,
Tomasz Figa
Only the specific compatible (arm,arm1176jzf-s) is allowed by dtschema:
cpu@0: compatible: ['arm,arm1176jzf-s', 'arm,arm1176'] is too long
cpu@0: compatible: Additional items are not allowed ('arm,arm1176' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c64xx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi
index 2e611df37911..cb11a87dbc42 100644
--- a/arch/arm/boot/dts/s3c64xx.dtsi
+++ b/arch/arm/boot/dts/s3c64xx.dtsi
@@ -34,7 +34,7 @@
cpu@0 {
device_type = "cpu";
- compatible = "arm,arm1176jzf-s", "arm,arm1176";
+ compatible = "arm,arm1176jzf-s";
reg = <0x0>;
};
};
--
2.17.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 06/11] ARM: dts: s3c6410: remove additional CPU compatible
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Sylwester Nawrocki, Bartlomiej Zolnierkiewicz, Tomasz Figa,
Marek Szyprowski
Only the specific compatible (arm,arm1176jzf-s) is allowed by dtschema:
cpu@0: compatible: ['arm,arm1176jzf-s', 'arm,arm1176'] is too long
cpu@0: compatible: Additional items are not allowed ('arm,arm1176' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c64xx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi
index 2e611df37911..cb11a87dbc42 100644
--- a/arch/arm/boot/dts/s3c64xx.dtsi
+++ b/arch/arm/boot/dts/s3c64xx.dtsi
@@ -34,7 +34,7 @@
cpu@0 {
device_type = "cpu";
- compatible = "arm,arm1176jzf-s", "arm,arm1176";
+ compatible = "arm,arm1176jzf-s";
reg = <0x0>;
};
};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 07/11] ARM: dts: s3c24xx: fix number of PWM cells
2020-09-07 18:33 ` Krzysztof Kozlowski
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki,
Tomasz Figa
The PWM has only three cells, not four, as pointed out by dtschema:
timer@51000000: #pwm-cells:0:0: 3 was expected
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c24xx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi
index 6d8dd3cdd3c0..0d49d7680e72 100644
--- a/arch/arm/boot/dts/s3c24xx.dtsi
+++ b/arch/arm/boot/dts/s3c24xx.dtsi
@@ -43,7 +43,7 @@
compatible = "samsung,s3c2410-pwm";
reg = <0x51000000 0x1000>;
interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>;
- #pwm-cells = <4>;
+ #pwm-cells = <3>;
};
uart0: serial@50000000 {
--
2.17.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 07/11] ARM: dts: s3c24xx: fix number of PWM cells
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Sylwester Nawrocki, Bartlomiej Zolnierkiewicz, Tomasz Figa,
Marek Szyprowski
The PWM has only three cells, not four, as pointed out by dtschema:
timer@51000000: #pwm-cells:0:0: 3 was expected
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c24xx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi
index 6d8dd3cdd3c0..0d49d7680e72 100644
--- a/arch/arm/boot/dts/s3c24xx.dtsi
+++ b/arch/arm/boot/dts/s3c24xx.dtsi
@@ -43,7 +43,7 @@
compatible = "samsung,s3c2410-pwm";
reg = <0x51000000 0x1000>;
interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>;
- #pwm-cells = <4>;
+ #pwm-cells = <3>;
};
uart0: serial@50000000 {
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 08/11] ARM: dts: s3c24xx: override nods by label
2020-09-07 18:33 ` Krzysztof Kozlowski
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki,
Tomasz Figa
Using full paths to extend or override a device tree node is error
prone. If there was a typo error, a new node will be created instead of
extending the existing node. This will lead to run-time errors that
could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c2416.dtsi | 104 ++++++++++++++++-----------------
arch/arm/boot/dts/s3c24xx.dtsi | 22 +++----
2 files changed, 63 insertions(+), 63 deletions(-)
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index 6adf64ea3ff2..d1dec9f52f69 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -23,49 +23,12 @@
};
};
- interrupt-controller@4a000000 {
- compatible = "samsung,s3c2416-irq";
- };
-
clocks: clock-controller@4c000000 {
compatible = "samsung,s3c2416-clock";
reg = <0x4c000000 0x40>;
#clock-cells = <1>;
};
- pinctrl@56000000 {
- compatible = "samsung,s3c2416-pinctrl";
- };
-
- timer@51000000 {
- clocks = <&clocks PCLK_PWM>;
- clock-names = "timers";
- };
-
- uart_0: serial@50000000 {
- compatible = "samsung,s3c2440-uart";
- clock-names = "uart", "clk_uart_baud2",
- "clk_uart_baud3";
- clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
- <&clocks SCLK_UART>;
- };
-
- uart_1: serial@50004000 {
- compatible = "samsung,s3c2440-uart";
- clock-names = "uart", "clk_uart_baud2",
- "clk_uart_baud3";
- clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
- <&clocks SCLK_UART>;
- };
-
- uart_2: serial@50008000 {
- compatible = "samsung,s3c2440-uart";
- clock-names = "uart", "clk_uart_baud2",
- "clk_uart_baud3";
- clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
- <&clocks SCLK_UART>;
- };
-
uart_3: serial@5000c000 {
compatible = "samsung,s3c2440-uart";
reg = <0x5000C000 0x4000>;
@@ -98,22 +61,59 @@
<&clocks MUX_HSMMC1>;
status = "disabled";
};
+};
- watchdog: watchdog@53000000 {
- interrupts = <1 9 27 3>;
- clocks = <&clocks PCLK_WDT>;
- clock-names = "watchdog";
- };
+&i2c {
+ compatible = "samsung,s3c2440-i2c";
+ clocks = <&clocks PCLK_I2C0>;
+ clock-names = "i2c";
+};
- rtc: rtc@57000000 {
- compatible = "samsung,s3c2416-rtc";
- clocks = <&clocks PCLK_RTC>;
- clock-names = "rtc";
- };
+&intc {
+ compatible = "samsung,s3c2416-irq";
+};
- i2c@54000000 {
- compatible = "samsung,s3c2440-i2c";
- clocks = <&clocks PCLK_I2C0>;
- clock-names = "i2c";
- };
+&pinctrl_0 {
+ compatible = "samsung,s3c2416-pinctrl";
+};
+
+&rtc {
+ compatible = "samsung,s3c2416-rtc";
+ clocks = <&clocks PCLK_RTC>;
+ clock-names = "rtc";
+};
+
+&timer {
+ clocks = <&clocks PCLK_PWM>;
+ clock-names = "timers";
+};
+
+&uart_0 {
+ compatible = "samsung,s3c2440-uart";
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+ <&clocks SCLK_UART>;
+};
+
+&uart_1 {
+ compatible = "samsung,s3c2440-uart";
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+ <&clocks SCLK_UART>;
+};
+
+&uart_2 {
+ compatible = "samsung,s3c2440-uart";
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
+ <&clocks SCLK_UART>;
+};
+
+&watchdog {
+ interrupts = <1 9 27 3>;
+ clocks = <&clocks PCLK_WDT>;
+ clock-names = "watchdog";
};
diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi
index 0d49d7680e72..80d4ce79be55 100644
--- a/arch/arm/boot/dts/s3c24xx.dtsi
+++ b/arch/arm/boot/dts/s3c24xx.dtsi
@@ -13,12 +13,12 @@
aliases {
pinctrl0 = &pinctrl_0;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
+ serial0 = &uart_0;
+ serial1 = &uart_1;
+ serial2 = &uart_2;
};
- intc:interrupt-controller@4a000000 {
+ intc: interrupt-controller@4a000000 {
compatible = "samsung,s3c2410-irq";
reg = <0x4a000000 0x100>;
interrupt-controller;
@@ -39,49 +39,49 @@
};
};
- timer@51000000 {
+ timer: timer@51000000 {
compatible = "samsung,s3c2410-pwm";
reg = <0x51000000 0x1000>;
interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>;
#pwm-cells = <3>;
};
- uart0: serial@50000000 {
+ uart_0: serial@50000000 {
compatible = "samsung,s3c2410-uart";
reg = <0x50000000 0x4000>;
interrupts = <1 28 0 4>, <1 28 1 4>;
status = "disabled";
};
- uart1: serial@50004000 {
+ uart_1: serial@50004000 {
compatible = "samsung,s3c2410-uart";
reg = <0x50004000 0x4000>;
interrupts = <1 23 3 4>, <1 23 4 4>;
status = "disabled";
};
- uart2: serial@50008000 {
+ uart_2: serial@50008000 {
compatible = "samsung,s3c2410-uart";
reg = <0x50008000 0x4000>;
interrupts = <1 15 6 4>, <1 15 7 4>;
status = "disabled";
};
- watchdog@53000000 {
+ watchdog: watchdog@53000000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x53000000 0x100>;
interrupts = <0 0 9 3>;
status = "disabled";
};
- rtc@57000000 {
+ rtc: rtc@57000000 {
compatible = "samsung,s3c2410-rtc";
reg = <0x57000000 0x100>;
interrupts = <0 0 30 3>, <0 0 8 3>;
status = "disabled";
};
- i2c@54000000 {
+ i2c: i2c@54000000 {
compatible = "samsung,s3c2410-i2c";
reg = <0x54000000 0x100>;
interrupts = <0 0 27 3>;
--
2.17.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 08/11] ARM: dts: s3c24xx: override nods by label
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Sylwester Nawrocki, Bartlomiej Zolnierkiewicz, Tomasz Figa,
Marek Szyprowski
Using full paths to extend or override a device tree node is error
prone. If there was a typo error, a new node will be created instead of
extending the existing node. This will lead to run-time errors that
could be hard to detect.
A mistyped label on the other hand, will cause a dtc compile error
(during build time).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c2416.dtsi | 104 ++++++++++++++++-----------------
arch/arm/boot/dts/s3c24xx.dtsi | 22 +++----
2 files changed, 63 insertions(+), 63 deletions(-)
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index 6adf64ea3ff2..d1dec9f52f69 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -23,49 +23,12 @@
};
};
- interrupt-controller@4a000000 {
- compatible = "samsung,s3c2416-irq";
- };
-
clocks: clock-controller@4c000000 {
compatible = "samsung,s3c2416-clock";
reg = <0x4c000000 0x40>;
#clock-cells = <1>;
};
- pinctrl@56000000 {
- compatible = "samsung,s3c2416-pinctrl";
- };
-
- timer@51000000 {
- clocks = <&clocks PCLK_PWM>;
- clock-names = "timers";
- };
-
- uart_0: serial@50000000 {
- compatible = "samsung,s3c2440-uart";
- clock-names = "uart", "clk_uart_baud2",
- "clk_uart_baud3";
- clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
- <&clocks SCLK_UART>;
- };
-
- uart_1: serial@50004000 {
- compatible = "samsung,s3c2440-uart";
- clock-names = "uart", "clk_uart_baud2",
- "clk_uart_baud3";
- clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
- <&clocks SCLK_UART>;
- };
-
- uart_2: serial@50008000 {
- compatible = "samsung,s3c2440-uart";
- clock-names = "uart", "clk_uart_baud2",
- "clk_uart_baud3";
- clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
- <&clocks SCLK_UART>;
- };
-
uart_3: serial@5000c000 {
compatible = "samsung,s3c2440-uart";
reg = <0x5000C000 0x4000>;
@@ -98,22 +61,59 @@
<&clocks MUX_HSMMC1>;
status = "disabled";
};
+};
- watchdog: watchdog@53000000 {
- interrupts = <1 9 27 3>;
- clocks = <&clocks PCLK_WDT>;
- clock-names = "watchdog";
- };
+&i2c {
+ compatible = "samsung,s3c2440-i2c";
+ clocks = <&clocks PCLK_I2C0>;
+ clock-names = "i2c";
+};
- rtc: rtc@57000000 {
- compatible = "samsung,s3c2416-rtc";
- clocks = <&clocks PCLK_RTC>;
- clock-names = "rtc";
- };
+&intc {
+ compatible = "samsung,s3c2416-irq";
+};
- i2c@54000000 {
- compatible = "samsung,s3c2440-i2c";
- clocks = <&clocks PCLK_I2C0>;
- clock-names = "i2c";
- };
+&pinctrl_0 {
+ compatible = "samsung,s3c2416-pinctrl";
+};
+
+&rtc {
+ compatible = "samsung,s3c2416-rtc";
+ clocks = <&clocks PCLK_RTC>;
+ clock-names = "rtc";
+};
+
+&timer {
+ clocks = <&clocks PCLK_PWM>;
+ clock-names = "timers";
+};
+
+&uart_0 {
+ compatible = "samsung,s3c2440-uart";
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+ <&clocks SCLK_UART>;
+};
+
+&uart_1 {
+ compatible = "samsung,s3c2440-uart";
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+ <&clocks SCLK_UART>;
+};
+
+&uart_2 {
+ compatible = "samsung,s3c2440-uart";
+ clock-names = "uart", "clk_uart_baud2",
+ "clk_uart_baud3";
+ clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
+ <&clocks SCLK_UART>;
+};
+
+&watchdog {
+ interrupts = <1 9 27 3>;
+ clocks = <&clocks PCLK_WDT>;
+ clock-names = "watchdog";
};
diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi
index 0d49d7680e72..80d4ce79be55 100644
--- a/arch/arm/boot/dts/s3c24xx.dtsi
+++ b/arch/arm/boot/dts/s3c24xx.dtsi
@@ -13,12 +13,12 @@
aliases {
pinctrl0 = &pinctrl_0;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
+ serial0 = &uart_0;
+ serial1 = &uart_1;
+ serial2 = &uart_2;
};
- intc:interrupt-controller@4a000000 {
+ intc: interrupt-controller@4a000000 {
compatible = "samsung,s3c2410-irq";
reg = <0x4a000000 0x100>;
interrupt-controller;
@@ -39,49 +39,49 @@
};
};
- timer@51000000 {
+ timer: timer@51000000 {
compatible = "samsung,s3c2410-pwm";
reg = <0x51000000 0x1000>;
interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>;
#pwm-cells = <3>;
};
- uart0: serial@50000000 {
+ uart_0: serial@50000000 {
compatible = "samsung,s3c2410-uart";
reg = <0x50000000 0x4000>;
interrupts = <1 28 0 4>, <1 28 1 4>;
status = "disabled";
};
- uart1: serial@50004000 {
+ uart_1: serial@50004000 {
compatible = "samsung,s3c2410-uart";
reg = <0x50004000 0x4000>;
interrupts = <1 23 3 4>, <1 23 4 4>;
status = "disabled";
};
- uart2: serial@50008000 {
+ uart_2: serial@50008000 {
compatible = "samsung,s3c2410-uart";
reg = <0x50008000 0x4000>;
interrupts = <1 15 6 4>, <1 15 7 4>;
status = "disabled";
};
- watchdog@53000000 {
+ watchdog: watchdog@53000000 {
compatible = "samsung,s3c2410-wdt";
reg = <0x53000000 0x100>;
interrupts = <0 0 9 3>;
status = "disabled";
};
- rtc@57000000 {
+ rtc: rtc@57000000 {
compatible = "samsung,s3c2410-rtc";
reg = <0x57000000 0x100>;
interrupts = <0 0 30 3>, <0 0 8 3>;
status = "disabled";
};
- i2c@54000000 {
+ i2c: i2c@54000000 {
compatible = "samsung,s3c2410-i2c";
reg = <0x54000000 0x100>;
interrupts = <0 0 27 3>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 09/11] ARM: dts: s3c24xx: align PWM/timer node name with dtschema
2020-09-07 18:33 ` Krzysztof Kozlowski
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki,
Tomasz Figa
Although PWM is used on S3C24xx as clocksource/timer, the dtschema
expects the node to be named in certain format:
timer@51000000: $nodename:0: 'timer@51000000' does not match '^pwm(@.*|-[0-9a-f])*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c24xx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi
index 80d4ce79be55..06f82c7e458e 100644
--- a/arch/arm/boot/dts/s3c24xx.dtsi
+++ b/arch/arm/boot/dts/s3c24xx.dtsi
@@ -39,7 +39,7 @@
};
};
- timer: timer@51000000 {
+ timer: pwm@51000000 {
compatible = "samsung,s3c2410-pwm";
reg = <0x51000000 0x1000>;
interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>;
--
2.17.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 09/11] ARM: dts: s3c24xx: align PWM/timer node name with dtschema
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Sylwester Nawrocki, Bartlomiej Zolnierkiewicz, Tomasz Figa,
Marek Szyprowski
Although PWM is used on S3C24xx as clocksource/timer, the dtschema
expects the node to be named in certain format:
timer@51000000: $nodename:0: 'timer@51000000' does not match '^pwm(@.*|-[0-9a-f])*$'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c24xx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi
index 80d4ce79be55..06f82c7e458e 100644
--- a/arch/arm/boot/dts/s3c24xx.dtsi
+++ b/arch/arm/boot/dts/s3c24xx.dtsi
@@ -39,7 +39,7 @@
};
};
- timer: timer@51000000 {
+ timer: pwm@51000000 {
compatible = "samsung,s3c2410-pwm";
reg = <0x51000000 0x1000>;
interrupts = <0 0 10 3>, <0 0 11 3>, <0 0 12 3>, <0 0 13 3>, <0 0 14 3>;
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 10/11] ARM: dts: s3c24xx: add address to CPU node
2020-09-07 18:33 ` Krzysztof Kozlowski
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki,
Tomasz Figa
The CPU nodes should be described as children of "cpus" bus node with
appropriate "reg" properties:
cpus: '#address-cells' is a required property
cpus: '#size-cells' is a required property
cpu: 'device_type' is a required property
cpu: 'reg' is a required property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c2416.dtsi | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index d1dec9f52f69..4f084f4fe44f 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -18,8 +18,13 @@
};
cpus {
- cpu {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
compatible = "arm,arm926ej-s";
+ reg = <0x0>;
};
};
--
2.17.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 10/11] ARM: dts: s3c24xx: add address to CPU node
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Sylwester Nawrocki, Bartlomiej Zolnierkiewicz, Tomasz Figa,
Marek Szyprowski
The CPU nodes should be described as children of "cpus" bus node with
appropriate "reg" properties:
cpus: '#address-cells' is a required property
cpus: '#size-cells' is a required property
cpu: 'device_type' is a required property
cpu: 'reg' is a required property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c2416.dtsi | 7 ++++++-
1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index d1dec9f52f69..4f084f4fe44f 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -18,8 +18,13 @@
};
cpus {
- cpu {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
compatible = "arm,arm926ej-s";
+ reg = <0x0>;
};
};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 11/11] ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416
2020-09-07 18:33 ` Krzysztof Kozlowski
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki,
Tomasz Figa
The fixed clocks are kept under dedicated 'clocks' node but this causes
multiple dtschema warnings:
clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
clocks: #size-cells:0:0: 0 is not one of [1, 2]
clocks: xti@0:reg:0: [0] is too short
clocks: 'ranges' is a required property
xti@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c2416-smdk2416.dts | 17 +++++------------
1 file changed, 5 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
index 811bfdef4e9b..47626ede6fdd 100644
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -17,18 +17,11 @@
reg = <0x30000000 0x4000000>;
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- xti: xti@0 {
- compatible = "fixed-clock";
- reg = <0>;
- clock-frequency = <12000000>;
- clock-output-names = "xti";
- #clock-cells = <0>;
- };
+ xti: clock-0 {
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ clock-output-names = "xti";
+ #clock-cells = <0>;
};
};
--
2.17.1
^ permalink raw reply related [flat|nested] 28+ messages in thread
* [PATCH 11/11] ARM: dts: s3c24xx: move fixed clocks under root node in SMDK2416
@ 2020-09-07 18:33 ` Krzysztof Kozlowski
0 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-07 18:33 UTC (permalink / raw)
To: Kukjin Kim, Krzysztof Kozlowski, Rob Herring, Lihua Yao,
linux-arm-kernel, linux-samsung-soc, devicetree, linux-kernel
Cc: Sylwester Nawrocki, Bartlomiej Zolnierkiewicz, Tomasz Figa,
Marek Szyprowski
The fixed clocks are kept under dedicated 'clocks' node but this causes
multiple dtschema warnings:
clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
clocks: #size-cells:0:0: 0 is not one of [1, 2]
clocks: xti@0:reg:0: [0] is too short
clocks: 'ranges' is a required property
xti@0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
---
arch/arm/boot/dts/s3c2416-smdk2416.dts | 17 +++++------------
1 file changed, 5 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
index 811bfdef4e9b..47626ede6fdd 100644
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -17,18 +17,11 @@
reg = <0x30000000 0x4000000>;
};
- clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
- xti: xti@0 {
- compatible = "fixed-clock";
- reg = <0>;
- clock-frequency = <12000000>;
- clock-output-names = "xti";
- #clock-cells = <0>;
- };
+ xti: clock-0 {
+ compatible = "fixed-clock";
+ clock-frequency = <12000000>;
+ clock-output-names = "xti";
+ #clock-cells = <0>;
};
};
--
2.17.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply related [flat|nested] 28+ messages in thread
* Re: [PATCH 00/11] ARM: dts: s3c: dtschema fixes
2020-09-07 18:33 ` Krzysztof Kozlowski
@ 2020-09-11 14:38 ` Krzysztof Kozlowski
-1 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-11 14:38 UTC (permalink / raw)
To: Kukjin Kim, Rob Herring, Lihua Yao, linux-arm-kernel,
linux-samsung-soc, devicetree, linux-kernel
Cc: Marek Szyprowski, Bartlomiej Zolnierkiewicz, Sylwester Nawrocki,
Tomasz Figa
On Mon, Sep 07, 2020 at 08:33:02PM +0200, Krzysztof Kozlowski wrote:
> Hi,
>
> This is last serie of big dtschema cleanups for Samsung DTS. It fixes
> almost all dtschema violations, except:
>
> s3c6410-mini6410.dt.yaml: srom-cs1-bus@18000000: ethernet@18000000:reg:0: [402653184, 2, 402653188, 2] is too long
>
> which is similar to the case with SMDK5410 (Exynos5410).
>
> The patchset was not tested on HW.
>
> Best regards,
> Krzysztof
Applied entire series.
Best regards,
Krzysztof
^ permalink raw reply [flat|nested] 28+ messages in thread
* Re: [PATCH 00/11] ARM: dts: s3c: dtschema fixes
@ 2020-09-11 14:38 ` Krzysztof Kozlowski
0 siblings, 0 replies; 28+ messages in thread
From: Krzysztof Kozlowski @ 2020-09-11 14:38 UTC (permalink / raw)
To: Kukjin Kim, Rob Herring, Lihua Yao, linux-arm-kernel,
linux-samsung-soc, devicetree, linux-kernel
Cc: Sylwester Nawrocki, Bartlomiej Zolnierkiewicz, Tomasz Figa,
Marek Szyprowski
On Mon, Sep 07, 2020 at 08:33:02PM +0200, Krzysztof Kozlowski wrote:
> Hi,
>
> This is last serie of big dtschema cleanups for Samsung DTS. It fixes
> almost all dtschema violations, except:
>
> s3c6410-mini6410.dt.yaml: srom-cs1-bus@18000000: ethernet@18000000:reg:0: [402653184, 2, 402653188, 2] is too long
>
> which is similar to the case with SMDK5410 (Exynos5410).
>
> The patchset was not tested on HW.
>
> Best regards,
> Krzysztof
Applied entire series.
Best regards,
Krzysztof
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
^ permalink raw reply [flat|nested] 28+ messages in thread