* [PATCH v2 0/3] brcmfmac: SoftAP creation and dcmd buffer size changes
@ 2020-09-14 3:16 Wright Feng
2020-09-14 3:16 ` [PATCH v2 1/3] brcmfmac: support virtual interface creation from firmware Wright Feng
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Wright Feng @ 2020-09-14 3:16 UTC (permalink / raw)
To: linux-wireless
Cc: wright.feng, brcm80211-dev-list, brcm80211-dev-list,
Arend van Spriel, Franky Lin, Hante Meuleman, Kalle Valo,
chi-hsien.lin
Allow SoftAP creation via vendor command from test tool; also update
dcmd buffer size settings for new firmware.
Changes in v2:
- Fix sparse check error in v1
- Remove one patch due to duplicate
- Add more comment in "brcmfmac: increase dcmd max control buffer
size" patch
Kurt Lee (1):
brcmfmac: set net carrier on via test tool for AP mode
Double Lo (2):
brcmfmac: support virtual interface creation from firmware
brcmfmac: increase dcmd max control buffer size
.../broadcom/brcm80211/brcmfmac/bcdc.c | 4 +-
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 50 +++++++++++++++++--
.../broadcom/brcm80211/brcmfmac/vendor.c | 9 ++++
3 files changed, 58 insertions(+), 5 deletions(-)
--
2.25.0
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH v2 1/3] brcmfmac: support virtual interface creation from firmware
2020-09-14 3:16 [PATCH v2 0/3] brcmfmac: SoftAP creation and dcmd buffer size changes Wright Feng
@ 2020-09-14 3:16 ` Wright Feng
2020-09-14 3:16 ` [PATCH v2 2/3] brcmfmac: set net carrier on via test tool for AP mode Wright Feng
2020-09-14 3:16 ` [PATCH v2 3/3] brcmfmac: increase dcmd max control buffer size Wright Feng
2 siblings, 0 replies; 6+ messages in thread
From: Wright Feng @ 2020-09-14 3:16 UTC (permalink / raw)
To: linux-wireless
Cc: wright.feng, brcm80211-dev-list, brcm80211-dev-list,
Arend van Spriel, Franky Lin, Hante Meuleman, Kalle Valo,
chi-hsien.lin, Double Lo
From: "Double Lo" <double.lo@cypress.com>
Allow interface creation via IF_ADD event from firmware.
Signed-off-by: Double Lo <double.lo@cypress.com>
---
.../broadcom/brcm80211/brcmfmac/cfg80211.c | 50 +++++++++++++++++--
1 file changed, 46 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
index 5d99771c3f64..c0177e121526 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c
@@ -230,6 +230,9 @@ struct parsed_vndr_ies {
struct parsed_vndr_ie_info ie_info[VNDR_IE_PARSE_LIMIT];
};
+#define WLC_E_IF_ROLE_STA 0 /* Infra STA */
+#define WLC_E_IF_ROLE_AP 1 /* Access Point */
+
static u8 nl80211_band_to_fwil(enum nl80211_band band)
{
switch (band) {
@@ -5535,8 +5538,10 @@ void brcmf_cfg80211_free_netdev(struct net_device *ndev)
ifp = netdev_priv(ndev);
vif = ifp->vif;
- if (vif)
+ if (vif) {
brcmf_free_vif(vif);
+ ifp->vif = NULL;
+ }
}
static bool brcmf_is_linkup(struct brcmf_cfg80211_vif *vif,
@@ -6102,6 +6107,9 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp,
struct brcmf_if_event *ifevent = (struct brcmf_if_event *)data;
struct brcmf_cfg80211_vif_event *event = &cfg->vif_event;
struct brcmf_cfg80211_vif *vif;
+ enum nl80211_iftype iftype = NL80211_IFTYPE_UNSPECIFIED;
+ bool vif_pend = false;
+ int err;
brcmf_dbg(TRACE, "Enter: action %u flags %u ifidx %u bsscfgidx %u\n",
ifevent->action, ifevent->flags, ifevent->ifidx,
@@ -6114,9 +6122,30 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp,
switch (ifevent->action) {
case BRCMF_E_IF_ADD:
/* waiting process may have timed out */
- if (!cfg->vif_event.vif) {
- spin_unlock(&event->vif_event_lock);
- return -EBADF;
+ if (!vif) {
+ /* handle IF_ADD event from firmware */
+ vif_pend = true;
+ if (ifevent->role == WLC_E_IF_ROLE_STA)
+ iftype = NL80211_IFTYPE_STATION;
+ else if (ifevent->role == WLC_E_IF_ROLE_AP)
+ iftype = NL80211_IFTYPE_AP;
+ else
+ vif_pend = false;
+
+ if (vif_pend) {
+ spin_unlock(&event->vif_event_lock);
+ vif = brcmf_alloc_vif(cfg, iftype);
+ if (IS_ERR(vif)) {
+ brcmf_err("Role:%d failed to alloc vif\n",
+ ifevent->role);
+ return PTR_ERR(vif);
+ }
+ spin_lock(&event->vif_event_lock);
+ } else {
+ brcmf_err("Invalid Role:%d\n", ifevent->role);
+ spin_unlock(&event->vif_event_lock);
+ return -EBADF;
+ }
}
ifp->vif = vif;
@@ -6126,6 +6155,19 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp,
ifp->ndev->ieee80211_ptr = &vif->wdev;
SET_NETDEV_DEV(ifp->ndev, wiphy_dev(cfg->wiphy));
}
+
+ if (vif_pend) {
+ err = brcmf_net_attach(ifp, false);
+ if (err) {
+ brcmf_err("netdevice register failed with err:%d\n",
+ err);
+ brcmf_free_vif(vif);
+ free_netdev(ifp->ndev);
+ }
+ spin_unlock(&event->vif_event_lock);
+ return err;
+ }
+
spin_unlock(&event->vif_event_lock);
wake_up(&event->vif_wq);
return 0;
--
2.25.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 2/3] brcmfmac: set net carrier on via test tool for AP mode
2020-09-14 3:16 [PATCH v2 0/3] brcmfmac: SoftAP creation and dcmd buffer size changes Wright Feng
2020-09-14 3:16 ` [PATCH v2 1/3] brcmfmac: support virtual interface creation from firmware Wright Feng
@ 2020-09-14 3:16 ` Wright Feng
2020-09-14 8:20 ` Kalle Valo
2020-09-14 3:16 ` [PATCH v2 3/3] brcmfmac: increase dcmd max control buffer size Wright Feng
2 siblings, 1 reply; 6+ messages in thread
From: Wright Feng @ 2020-09-14 3:16 UTC (permalink / raw)
To: linux-wireless
Cc: wright.feng, brcm80211-dev-list, brcm80211-dev-list,
Arend van Spriel, Franky Lin, Hante Meuleman, Kalle Valo,
chi-hsien.lin, Kurt Lee
From: Kurt Lee <kurt.lee@cypress.com>
In manufacturing line, test tool may be used to enable SoftAP. Such
SoftAP can't pass traffic because netif carrier is off by default. To
allow such use case, let brcmfmac parse ioctl cmd, and then set iftype
to ap mode and report netif_carrier_on to upper layer.
Signed-off-by: Kurt Lee <kurt.lee@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
---
.../net/wireless/broadcom/brcm80211/brcmfmac/vendor.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
index d07e7c7355d9..5edf5ac1167a 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
@@ -64,6 +64,15 @@ static int brcmf_cfg80211_vndr_cmds_dcmd_handler(struct wiphy *wiphy,
*(char *)(dcmd_buf + len) = '\0';
}
+ if (cmdhdr->cmd == BRCMF_C_SET_AP) {
+ if (*(int *)(dcmd_buf) == 1) {
+ ifp->vif->wdev.iftype = NL80211_IFTYPE_AP;
+ brcmf_net_setcarrier(ifp, true);
+ } else {
+ ifp->vif->wdev.iftype = NL80211_IFTYPE_STATION;
+ }
+ }
+
if (cmdhdr->set)
ret = brcmf_fil_cmd_data_set(ifp, cmdhdr->cmd, dcmd_buf,
ret_len);
--
2.25.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH v2 3/3] brcmfmac: increase dcmd max control buffer size
2020-09-14 3:16 [PATCH v2 0/3] brcmfmac: SoftAP creation and dcmd buffer size changes Wright Feng
2020-09-14 3:16 ` [PATCH v2 1/3] brcmfmac: support virtual interface creation from firmware Wright Feng
2020-09-14 3:16 ` [PATCH v2 2/3] brcmfmac: set net carrier on via test tool for AP mode Wright Feng
@ 2020-09-14 3:16 ` Wright Feng
2 siblings, 0 replies; 6+ messages in thread
From: Wright Feng @ 2020-09-14 3:16 UTC (permalink / raw)
To: linux-wireless
Cc: wright.feng, brcm80211-dev-list, brcm80211-dev-list,
Arend van Spriel, Franky Lin, Hante Meuleman, Kalle Valo,
chi-hsien.lin, Double Lo
From: "Double Lo" <double.lo@cypress.com>
Add the padding round up value in the max control buffer
size to match firmware configuration for new chips.
Signed-off-by: Double Lo <double.lo@cypress.com>
Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
index 2c95a08a5871..705130cf27d5 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c
@@ -87,6 +87,8 @@ struct brcmf_proto_bcdc_header {
* plus any space that might be needed
* for bus alignment padding.
*/
+#define ROUND_UP_MARGIN 2048
+
struct brcmf_bcdc {
u16 reqid;
u8 bus_header[BUS_HEADER_LEN];
@@ -471,7 +473,7 @@ int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr)
drvr->hdrlen += BCDC_HEADER_LEN + BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES;
drvr->bus_if->maxctl = BRCMF_DCMD_MAXLEN +
- sizeof(struct brcmf_proto_bcdc_dcmd);
+ sizeof(struct brcmf_proto_bcdc_dcmd) + ROUND_UP_MARGIN;
return 0;
fail:
--
2.25.0
^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH v2 2/3] brcmfmac: set net carrier on via test tool for AP mode
2020-09-14 3:16 ` [PATCH v2 2/3] brcmfmac: set net carrier on via test tool for AP mode Wright Feng
@ 2020-09-14 8:20 ` Kalle Valo
2020-09-14 8:42 ` Arend Van Spriel
0 siblings, 1 reply; 6+ messages in thread
From: Kalle Valo @ 2020-09-14 8:20 UTC (permalink / raw)
To: Wright Feng
Cc: linux-wireless, brcm80211-dev-list, brcm80211-dev-list,
Arend van Spriel, Franky Lin, Hante Meuleman, chi-hsien.lin,
Kurt Lee
Wright Feng <wright.feng@cypress.com> writes:
> From: Kurt Lee <kurt.lee@cypress.com>
>
> In manufacturing line, test tool may be used to enable SoftAP. Such
> SoftAP can't pass traffic because netif carrier is off by default. To
> allow such use case, let brcmfmac parse ioctl cmd, and then set iftype
> to ap mode and report netif_carrier_on to upper layer.
nl80211 does not use ioctl(), so the commit log is misleading.
> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
> @@ -64,6 +64,15 @@ static int brcmf_cfg80211_vndr_cmds_dcmd_handler(struct wiphy *wiphy,
> *(char *)(dcmd_buf + len) = '\0';
> }
>
> + if (cmdhdr->cmd == BRCMF_C_SET_AP) {
> + if (*(int *)(dcmd_buf) == 1) {
> + ifp->vif->wdev.iftype = NL80211_IFTYPE_AP;
> + brcmf_net_setcarrier(ifp, true);
> + } else {
> + ifp->vif->wdev.iftype = NL80211_IFTYPE_STATION;
> + }
> + }
We now have rules for the vendor API:
https://wireless.wiki.kernel.org/en/developers/documentation/nl80211#vendor-specific_api
As the BRCMF_VNDR_CMDS_DCMD just seems to be a simple pipe between the
user space and the firmware I'm leaning towards that we should just
remove support for that command from brcmfmac.
And besides, for factory tests you should be using NL80211_CMD_TESTMODE.
The vendor API is meant for normal mode usage.
--
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH v2 2/3] brcmfmac: set net carrier on via test tool for AP mode
2020-09-14 8:20 ` Kalle Valo
@ 2020-09-14 8:42 ` Arend Van Spriel
0 siblings, 0 replies; 6+ messages in thread
From: Arend Van Spriel @ 2020-09-14 8:42 UTC (permalink / raw)
To: Kalle Valo, Wright Feng
Cc: linux-wireless, brcm80211-dev-list, brcm80211-dev-list,
Franky Lin, Hante Meuleman, chi-hsien.lin, Kurt Lee
[-- Attachment #1: Type: text/plain, Size: 2051 bytes --]
On 9/14/2020 10:20 AM, Kalle Valo wrote:
> Wright Feng <wright.feng@cypress.com> writes:
>
>> From: Kurt Lee <kurt.lee@cypress.com>
>>
>> In manufacturing line, test tool may be used to enable SoftAP. Such
>> SoftAP can't pass traffic because netif carrier is off by default. To
>> allow such use case, let brcmfmac parse ioctl cmd, and then set iftype
>> to ap mode and report netif_carrier_on to upper layer.
>
> nl80211 does not use ioctl(), so the commit log is misleading.
>
>> --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
>> +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/vendor.c
>> @@ -64,6 +64,15 @@ static int brcmf_cfg80211_vndr_cmds_dcmd_handler(struct wiphy *wiphy,
>> *(char *)(dcmd_buf + len) = '\0';
>> }
>>
>> + if (cmdhdr->cmd == BRCMF_C_SET_AP) {
>> + if (*(int *)(dcmd_buf) == 1) {
>> + ifp->vif->wdev.iftype = NL80211_IFTYPE_AP;
>> + brcmf_net_setcarrier(ifp, true);
>> + } else {
>> + ifp->vif->wdev.iftype = NL80211_IFTYPE_STATION;
>> + }
>> + }
>
> We now have rules for the vendor API:
>
> https://wireless.wiki.kernel.org/en/developers/documentation/nl80211#vendor-specific_api
>
> As the BRCMF_VNDR_CMDS_DCMD just seems to be a simple pipe between the
> user space and the firmware I'm leaning towards that we should just
> remove support for that command from brcmfmac.
>
> And besides, for factory tests you should be using NL80211_CMD_TESTMODE.
> The vendor API is meant for normal mode usage.
We talked about this API before. This command used to be a TESTMODE
command, but with the introduction of vendor commands in cfg80211 I
changed that. My reasons being that 1) it helps me in cfg80211 callback
development, and 2) (some of) our customers were not accepting the need
for a separate driver (build) for manufacturing. My intent has always
been to keep this opaque for the driver so I am opposed to patches like
this that are interpreting the opaque blob. The firmware could simply
generate a CARRIER event and the driver can act on that.
Regards,
Arend
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4176 bytes --]
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-09-14 8:42 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-14 3:16 [PATCH v2 0/3] brcmfmac: SoftAP creation and dcmd buffer size changes Wright Feng
2020-09-14 3:16 ` [PATCH v2 1/3] brcmfmac: support virtual interface creation from firmware Wright Feng
2020-09-14 3:16 ` [PATCH v2 2/3] brcmfmac: set net carrier on via test tool for AP mode Wright Feng
2020-09-14 8:20 ` Kalle Valo
2020-09-14 8:42 ` Arend Van Spriel
2020-09-14 3:16 ` [PATCH v2 3/3] brcmfmac: increase dcmd max control buffer size Wright Feng
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.