* [PATCH] configure: move cocoa option to Meson
@ 2020-09-16 8:11 Paolo Bonzini
2020-09-16 15:30 ` Richard Henderson
2020-09-18 11:54 ` Roman Bolshakov
0 siblings, 2 replies; 4+ messages in thread
From: Paolo Bonzini @ 2020-09-16 8:11 UTC (permalink / raw)
To: qemu-devel; +Cc: Christophe de Dinechin, r.bolshakov
While detection of the framework was already there, moving
the option allows for better error reporting.
Reported-by: Christophe de Dinechin <dinechin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
configure | 17 +++++++----------
meson.build | 10 ++++++++--
meson_options.txt | 2 ++
ui/meson.build | 2 +-
4 files changed, 18 insertions(+), 13 deletions(-)
diff --git a/configure b/configure
index d6fbadad27..b4c0e0d07c 100755
--- a/configure
+++ b/configure
@@ -448,7 +448,7 @@ bsd="no"
linux="no"
solaris="no"
profiler="no"
-cocoa="no"
+cocoa="auto"
softmmu="yes"
linux_user="no"
bsd_user="no"
@@ -868,7 +868,7 @@ Darwin)
QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS"
QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS"
fi
- cocoa="yes"
+ cocoa="enabled"
audio_drv_list="coreaudio try-sdl"
audio_possible_drivers="coreaudio sdl"
QEMU_LDFLAGS="-framework CoreFoundation -framework IOKit $QEMU_LDFLAGS"
@@ -1240,10 +1240,10 @@ for opt do
;;
--enable-profiler) profiler="yes"
;;
- --disable-cocoa) cocoa="no"
+ --disable-cocoa) cocoa="disabled"
;;
--enable-cocoa)
- cocoa="yes" ;
+ cocoa="enabled" ;
audio_drv_list="coreaudio $(echo $audio_drv_list | sed s,coreaudio,,g)"
;;
--disable-system) softmmu="no"
@@ -2388,8 +2388,8 @@ fi
# cocoa implies not SDL or GTK
# (the cocoa UI code currently assumes it is always the active UI
# and doesn't interact well with other UI frontend code)
-if test "$cocoa" = "yes"; then
- if test "$sdl" = "yes"; then
+if test "$cocoa" = "enabled"; then
+ if test "$sdl" = "enabled"; then
error_exit "Cocoa and SDL UIs cannot both be enabled at once"
fi
if test "$gtk" = "yes"; then
@@ -6622,9 +6622,6 @@ if test "$have_x11" = "yes" && test "$need_x11" = "yes"; then
echo "X11_CFLAGS=$x11_cflags" >> $config_host_mak
echo "X11_LIBS=$x11_libs" >> $config_host_mak
fi
-if test "$cocoa" = "yes" ; then
- echo "CONFIG_COCOA=y" >> $config_host_mak
-fi
if test "$iconv" = "yes" ; then
echo "CONFIG_ICONV=y" >> $config_host_mak
echo "ICONV_CFLAGS=$iconv_cflags" >> $config_host_mak
@@ -7937,7 +7934,7 @@ NINJA=${ninja:-$PWD/ninjatool} $meson setup \
-Db_pie=$(if test "$pie" = yes; then echo true; else echo false; fi) \
-Db_coverage=$(if test "$gcov" = yes; then echo true; else echo false; fi) \
-Dmalloc=$malloc -Dmalloc_trim=$malloc_trim \
- -Dsdl=$sdl -Dsdl_image=$sdl_image \
+ -Dcocoa=$cocoa -Dsdl=$sdl -Dsdl_image=$sdl_image \
-Dvnc=$vnc -Dvnc_sasl=$vnc_sasl -Dvnc_jpeg=$vnc_jpeg -Dvnc_png=$vnc_png \
-Dgettext=$gettext -Dxkbcommon=$xkbcommon -Du2f=$u2f\
$cross_arg \
diff --git a/meson.build b/meson.build
index d3b1e5c34c..c94e92d774 100644
--- a/meson.build
+++ b/meson.build
@@ -88,7 +88,7 @@ socket = []
version_res = []
coref = []
iokit = []
-cocoa = []
+cocoa = not_found
hvf = []
if targetos == 'windows'
socket = cc.find_library('ws2_32')
@@ -101,7 +101,7 @@ if targetos == 'windows'
elif targetos == 'darwin'
coref = dependency('appleframeworks', modules: 'CoreFoundation')
iokit = dependency('appleframeworks', modules: 'IOKit')
- cocoa = dependency('appleframeworks', modules: 'Cocoa')
+ cocoa = dependency('appleframeworks', modules: 'Cocoa', required: get_option('cocoa'))
hvf = dependency('appleframeworks', modules: 'Hypervisor')
elif targetos == 'sunos'
socket = [cc.find_library('socket'),
@@ -112,6 +112,11 @@ elif targetos == 'haiku'
cc.find_library('network'),
cc.find_library('bsd')]
endif
+
+if not cocoa.found() and get_option('cocoa').enabled()
+ error('Cocoa not available on this platform')
+endif
+
# The path to glib.h is added to all compilation commands. This was
# grandfathered in from the QEMU Makefiles.
add_project_arguments(config_host['GLIB_CFLAGS'].split(),
@@ -461,6 +466,7 @@ endif
# Create config-host.h
+config_host_data.set('CONFIG_COCOA', cocoa.found())
config_host_data.set('CONFIG_SDL', sdl.found())
config_host_data.set('CONFIG_SDL_IMAGE', sdl_image.found())
config_host_data.set('CONFIG_VNC', vnc.found())
diff --git a/meson_options.txt b/meson_options.txt
index 894e006799..599af8485f 100644
--- a/meson_options.txt
+++ b/meson_options.txt
@@ -11,6 +11,8 @@ option('malloc_trim', type : 'feature', value : 'auto',
option('malloc', type : 'combo', choices : ['system', 'tcmalloc', 'jemalloc'],
value: 'system', description: 'choose memory allocator to use')
+option('cocoa', type : 'feature', value : 'auto',
+ description: 'Cocoa user interface (macOS only)')
option('sdl', type : 'feature', value : 'auto',
description: 'SDL user interface')
option('sdl_image', type : 'feature', value : 'auto',
diff --git a/ui/meson.build b/ui/meson.build
index dd6c110136..8a080c38e3 100644
--- a/ui/meson.build
+++ b/ui/meson.build
@@ -15,7 +15,7 @@ softmmu_ss.add(files(
softmmu_ss.add(when: 'CONFIG_LINUX', if_true: files('input-linux.c'))
softmmu_ss.add(when: 'CONFIG_SPICE', if_true: files('spice-core.c', 'spice-input.c', 'spice-display.c'))
-softmmu_ss.add(when: [cocoa, 'CONFIG_COCOA'], if_true: files('cocoa.m'))
+softmmu_ss.add(when: cocoa, if_true: files('cocoa.m'))
vnc_ss = ss.source_set()
vnc_ss.add(files(
--
2.26.2
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] configure: move cocoa option to Meson
2020-09-16 8:11 [PATCH] configure: move cocoa option to Meson Paolo Bonzini
@ 2020-09-16 15:30 ` Richard Henderson
2020-09-16 16:20 ` Richard Henderson
2020-09-18 11:54 ` Roman Bolshakov
1 sibling, 1 reply; 4+ messages in thread
From: Richard Henderson @ 2020-09-16 15:30 UTC (permalink / raw)
To: Paolo Bonzini, qemu-devel; +Cc: Christophe de Dinechin, r.bolshakov
On 9/16/20 1:11 AM, Paolo Bonzini wrote:
> --enable-cocoa)
> - cocoa="yes" ;
> + cocoa="enabled" ;
Lose the stray ; at the same time?
> @@ -101,7 +101,7 @@ if targetos == 'windows'
> elif targetos == 'darwin'
> coref = dependency('appleframeworks', modules: 'CoreFoundation')
> iokit = dependency('appleframeworks', modules: 'IOKit')
> - cocoa = dependency('appleframeworks', modules: 'Cocoa')
> + cocoa = dependency('appleframeworks', modules: 'Cocoa', required: get_option('cocoa'))
> hvf = dependency('appleframeworks', modules: 'Hypervisor')
> elif targetos == 'sunos'
> socket = [cc.find_library('socket'),
> @@ -112,6 +112,11 @@ elif targetos == 'haiku'
> cc.find_library('network'),
> cc.find_library('bsd')]
> endif
> +
> +if not cocoa.found() and get_option('cocoa').enabled()
> + error('Cocoa not available on this platform')
> +endif
Isn't the error redundant with the required above?
r~
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] configure: move cocoa option to Meson
2020-09-16 15:30 ` Richard Henderson
@ 2020-09-16 16:20 ` Richard Henderson
0 siblings, 0 replies; 4+ messages in thread
From: Richard Henderson @ 2020-09-16 16:20 UTC (permalink / raw)
To: Paolo Bonzini, qemu-devel; +Cc: Christophe de Dinechin, r.bolshakov
On 9/16/20 8:30 AM, Richard Henderson wrote:
> Isn't the error redundant with the required above?
Nevermind. Obviously the required: is buried under the targetos check. ENOCOFFEE.
r~
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] configure: move cocoa option to Meson
2020-09-16 8:11 [PATCH] configure: move cocoa option to Meson Paolo Bonzini
2020-09-16 15:30 ` Richard Henderson
@ 2020-09-18 11:54 ` Roman Bolshakov
1 sibling, 0 replies; 4+ messages in thread
From: Roman Bolshakov @ 2020-09-18 11:54 UTC (permalink / raw)
To: Paolo Bonzini; +Cc: Christophe de Dinechin, qemu-devel
On Wed, Sep 16, 2020 at 04:11:30AM -0400, Paolo Bonzini wrote:
> While detection of the framework was already there, moving
> the option allows for better error reporting.
>
> Reported-by: Christophe de Dinechin <dinechin@redhat.com>
> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
> ---
> configure | 17 +++++++----------
> meson.build | 10 ++++++++--
> meson_options.txt | 2 ++
> ui/meson.build | 2 +-
> 4 files changed, 18 insertions(+), 13 deletions(-)
>
> diff --git a/configure b/configure
> index d6fbadad27..b4c0e0d07c 100755
> --- a/configure
> +++ b/configure
> @@ -448,7 +448,7 @@ bsd="no"
> linux="no"
> solaris="no"
> profiler="no"
> -cocoa="no"
> +cocoa="auto"
> softmmu="yes"
> linux_user="no"
> bsd_user="no"
> @@ -868,7 +868,7 @@ Darwin)
> QEMU_CFLAGS="-arch x86_64 $QEMU_CFLAGS"
> QEMU_LDFLAGS="-arch x86_64 $QEMU_LDFLAGS"
> fi
> - cocoa="yes"
> + cocoa="enabled"
> audio_drv_list="coreaudio try-sdl"
> audio_possible_drivers="coreaudio sdl"
> QEMU_LDFLAGS="-framework CoreFoundation -framework IOKit $QEMU_LDFLAGS"
> @@ -1240,10 +1240,10 @@ for opt do
> ;;
> --enable-profiler) profiler="yes"
> ;;
> - --disable-cocoa) cocoa="no"
> + --disable-cocoa) cocoa="disabled"
> ;;
> --enable-cocoa)
> - cocoa="yes" ;
> + cocoa="enabled" ;
> audio_drv_list="coreaudio $(echo $audio_drv_list | sed s,coreaudio,,g)"
> ;;
> --disable-system) softmmu="no"
> @@ -2388,8 +2388,8 @@ fi
> # cocoa implies not SDL or GTK
> # (the cocoa UI code currently assumes it is always the active UI
> # and doesn't interact well with other UI frontend code)
> -if test "$cocoa" = "yes"; then
> - if test "$sdl" = "yes"; then
> +if test "$cocoa" = "enabled"; then
> + if test "$sdl" = "enabled"; then
> error_exit "Cocoa and SDL UIs cannot both be enabled at once"
> fi
> if test "$gtk" = "yes"; then
> @@ -6622,9 +6622,6 @@ if test "$have_x11" = "yes" && test "$need_x11" = "yes"; then
> echo "X11_CFLAGS=$x11_cflags" >> $config_host_mak
> echo "X11_LIBS=$x11_libs" >> $config_host_mak
> fi
> -if test "$cocoa" = "yes" ; then
> - echo "CONFIG_COCOA=y" >> $config_host_mak
> -fi
> if test "$iconv" = "yes" ; then
> echo "CONFIG_ICONV=y" >> $config_host_mak
> echo "ICONV_CFLAGS=$iconv_cflags" >> $config_host_mak
> @@ -7937,7 +7934,7 @@ NINJA=${ninja:-$PWD/ninjatool} $meson setup \
> -Db_pie=$(if test "$pie" = yes; then echo true; else echo false; fi) \
> -Db_coverage=$(if test "$gcov" = yes; then echo true; else echo false; fi) \
> -Dmalloc=$malloc -Dmalloc_trim=$malloc_trim \
> - -Dsdl=$sdl -Dsdl_image=$sdl_image \
> + -Dcocoa=$cocoa -Dsdl=$sdl -Dsdl_image=$sdl_image \
> -Dvnc=$vnc -Dvnc_sasl=$vnc_sasl -Dvnc_jpeg=$vnc_jpeg -Dvnc_png=$vnc_png \
> -Dgettext=$gettext -Dxkbcommon=$xkbcommon -Du2f=$u2f\
> $cross_arg \
> diff --git a/meson.build b/meson.build
> index d3b1e5c34c..c94e92d774 100644
> --- a/meson.build
> +++ b/meson.build
> @@ -88,7 +88,7 @@ socket = []
> version_res = []
> coref = []
> iokit = []
> -cocoa = []
> +cocoa = not_found
> hvf = []
> if targetos == 'windows'
> socket = cc.find_library('ws2_32')
> @@ -101,7 +101,7 @@ if targetos == 'windows'
> elif targetos == 'darwin'
> coref = dependency('appleframeworks', modules: 'CoreFoundation')
> iokit = dependency('appleframeworks', modules: 'IOKit')
> - cocoa = dependency('appleframeworks', modules: 'Cocoa')
> + cocoa = dependency('appleframeworks', modules: 'Cocoa', required: get_option('cocoa'))
> hvf = dependency('appleframeworks', modules: 'Hypervisor')
> elif targetos == 'sunos'
> socket = [cc.find_library('socket'),
> @@ -112,6 +112,11 @@ elif targetos == 'haiku'
> cc.find_library('network'),
> cc.find_library('bsd')]
> endif
> +
> +if not cocoa.found() and get_option('cocoa').enabled()
> + error('Cocoa not available on this platform')
> +endif
> +
> # The path to glib.h is added to all compilation commands. This was
> # grandfathered in from the QEMU Makefiles.
> add_project_arguments(config_host['GLIB_CFLAGS'].split(),
> @@ -461,6 +466,7 @@ endif
>
> # Create config-host.h
>
> +config_host_data.set('CONFIG_COCOA', cocoa.found())
> config_host_data.set('CONFIG_SDL', sdl.found())
> config_host_data.set('CONFIG_SDL_IMAGE', sdl_image.found())
> config_host_data.set('CONFIG_VNC', vnc.found())
> diff --git a/meson_options.txt b/meson_options.txt
> index 894e006799..599af8485f 100644
> --- a/meson_options.txt
> +++ b/meson_options.txt
> @@ -11,6 +11,8 @@ option('malloc_trim', type : 'feature', value : 'auto',
> option('malloc', type : 'combo', choices : ['system', 'tcmalloc', 'jemalloc'],
> value: 'system', description: 'choose memory allocator to use')
>
> +option('cocoa', type : 'feature', value : 'auto',
> + description: 'Cocoa user interface (macOS only)')
> option('sdl', type : 'feature', value : 'auto',
> description: 'SDL user interface')
> option('sdl_image', type : 'feature', value : 'auto',
> diff --git a/ui/meson.build b/ui/meson.build
> index dd6c110136..8a080c38e3 100644
> --- a/ui/meson.build
> +++ b/ui/meson.build
> @@ -15,7 +15,7 @@ softmmu_ss.add(files(
>
> softmmu_ss.add(when: 'CONFIG_LINUX', if_true: files('input-linux.c'))
> softmmu_ss.add(when: 'CONFIG_SPICE', if_true: files('spice-core.c', 'spice-input.c', 'spice-display.c'))
> -softmmu_ss.add(when: [cocoa, 'CONFIG_COCOA'], if_true: files('cocoa.m'))
> +softmmu_ss.add(when: cocoa, if_true: files('cocoa.m'))
>
> vnc_ss = ss.source_set()
> vnc_ss.add(files(
> --
> 2.26.2
>
Hi Paolo,
The patch looks good but can't be applied to yesterday's evening
master:
Applying: configure: move cocoa option to Meson
error: patch failed: configure:7937
error: configure: patch does not apply
error: patch failed: meson_options.txt:11
error: meson_options.txt: patch does not apply
Patch failed at 0001 configure: move cocoa option to Meson
Regards,
Roman
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-09-18 11:55 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-16 8:11 [PATCH] configure: move cocoa option to Meson Paolo Bonzini
2020-09-16 15:30 ` Richard Henderson
2020-09-16 16:20 ` Richard Henderson
2020-09-18 11:54 ` Roman Bolshakov
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.