From: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> To: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, NXP Linux Team <linux-imx@nxp.com>, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Subject: [PATCH 05/13] ARM: dts: imx7-mba7: remove unsupported PHY LED setup Date: Fri, 18 Sep 2020 13:29:34 +0200 [thread overview] Message-ID: <20200918112942.1367-5-matthias.schiffer@ew.tq-group.com> (raw) In-Reply-To: <20200918112942.1367-1-matthias.schiffer@ew.tq-group.com> These properties were never supported by the DP83867, and a patch implementing them was rejected in favor of a different solution. Remove them. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> --- arch/arm/boot/dts/imx7-mba7.dtsi | 4 ---- arch/arm/boot/dts/imx7d-mba7.dts | 4 ---- 2 files changed, 8 deletions(-) diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi index d99912ade947..1af40032ab17 100644 --- a/arch/arm/boot/dts/imx7-mba7.dtsi +++ b/arch/arm/boot/dts/imx7-mba7.dtsi @@ -212,10 +212,6 @@ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - /* LED1: Link/Activity, LED2: Error */ - ti,led-function = <0x0db0>; - /* Active low, LED1 and LED2 driven by phy */ - ti,led-ctrl = <0x1001>; }; }; }; diff --git a/arch/arm/boot/dts/imx7d-mba7.dts b/arch/arm/boot/dts/imx7d-mba7.dts index 9f4f7112e598..1101be373ddf 100644 --- a/arch/arm/boot/dts/imx7d-mba7.dts +++ b/arch/arm/boot/dts/imx7d-mba7.dts @@ -39,10 +39,6 @@ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - /* LED1: Link/Activity, LED2: error */ - ti,led-function = <0x0db0>; - /* active low, LED1/2 driven by phy */ - ti,led-ctrl = <0x1001>; }; }; }; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> To: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>, Sascha Hauer <s.hauer@pengutronix.de> Cc: devicetree@vger.kernel.org, Matthias Schiffer <matthias.schiffer@ew.tq-group.com>, linux-kernel@vger.kernel.org, NXP Linux Team <linux-imx@nxp.com>, Pengutronix Kernel Team <kernel@pengutronix.de>, Fabio Estevam <festevam@gmail.com>, linux-arm-kernel@lists.infradead.org Subject: [PATCH 05/13] ARM: dts: imx7-mba7: remove unsupported PHY LED setup Date: Fri, 18 Sep 2020 13:29:34 +0200 [thread overview] Message-ID: <20200918112942.1367-5-matthias.schiffer@ew.tq-group.com> (raw) In-Reply-To: <20200918112942.1367-1-matthias.schiffer@ew.tq-group.com> These properties were never supported by the DP83867, and a patch implementing them was rejected in favor of a different solution. Remove them. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> --- arch/arm/boot/dts/imx7-mba7.dtsi | 4 ---- arch/arm/boot/dts/imx7d-mba7.dts | 4 ---- 2 files changed, 8 deletions(-) diff --git a/arch/arm/boot/dts/imx7-mba7.dtsi b/arch/arm/boot/dts/imx7-mba7.dtsi index d99912ade947..1af40032ab17 100644 --- a/arch/arm/boot/dts/imx7-mba7.dtsi +++ b/arch/arm/boot/dts/imx7-mba7.dtsi @@ -212,10 +212,6 @@ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - /* LED1: Link/Activity, LED2: Error */ - ti,led-function = <0x0db0>; - /* Active low, LED1 and LED2 driven by phy */ - ti,led-ctrl = <0x1001>; }; }; }; diff --git a/arch/arm/boot/dts/imx7d-mba7.dts b/arch/arm/boot/dts/imx7d-mba7.dts index 9f4f7112e598..1101be373ddf 100644 --- a/arch/arm/boot/dts/imx7d-mba7.dts +++ b/arch/arm/boot/dts/imx7d-mba7.dts @@ -39,10 +39,6 @@ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>; ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>; - /* LED1: Link/Activity, LED2: error */ - ti,led-function = <0x0db0>; - /* active low, LED1/2 driven by phy */ - ti,led-ctrl = <0x1001>; }; }; }; -- 2.17.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-18 11:34 UTC|newest] Thread overview: 54+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-18 11:29 [PATCH 01/13] dt-bindings: arm: fsl: update TQ-Systems SoMs and boards based on i.MX7 Matthias Schiffer 2020-09-18 11:29 ` Matthias Schiffer 2020-09-18 11:29 ` [PATCH 02/13] ARM: dts: imx7-tqma7: add SPI-NOR flash Matthias Schiffer 2020-09-18 11:29 ` Matthias Schiffer 2020-10-28 7:38 ` Shawn Guo 2020-10-28 7:38 ` Shawn Guo 2020-09-18 11:29 ` [PATCH 03/13] ARM: dts: imx7-mba7: update compatible strings Matthias Schiffer 2020-09-18 11:29 ` Matthias Schiffer 2020-10-28 8:36 ` Shawn Guo 2020-10-28 8:36 ` Shawn Guo 2020-09-18 11:29 ` [PATCH 04/13] ARM: dts: imx7-mba7: drop incorrect num-chipselects property Matthias Schiffer 2020-09-18 11:29 ` Matthias Schiffer 2020-10-28 7:40 ` Shawn Guo 2020-10-28 7:40 ` Shawn Guo 2020-09-18 11:29 ` Matthias Schiffer [this message] 2020-09-18 11:29 ` [PATCH 05/13] ARM: dts: imx7-mba7: remove unsupported PHY LED setup Matthias Schiffer 2020-10-28 7:40 ` Shawn Guo 2020-10-28 7:40 ` Shawn Guo 2020-09-18 11:29 ` [PATCH 06/13] ARM: dts: imx7-mba7: disable ethernet PHY clock outputs Matthias Schiffer 2020-09-18 11:29 ` Matthias Schiffer 2020-10-28 7:41 ` Shawn Guo 2020-10-28 7:41 ` Shawn Guo 2020-09-18 11:29 ` [PATCH 07/13] ARM: dts: imx7-mba7: configure watchdog Matthias Schiffer 2020-09-18 11:29 ` Matthias Schiffer 2020-10-28 8:27 ` Shawn Guo 2020-10-28 8:27 ` Shawn Guo 2020-09-18 11:29 ` [PATCH 08/13] ARM: dts: imx7-mba7: update MMC aliases Matthias Schiffer 2020-09-18 11:29 ` Matthias Schiffer 2020-10-28 8:28 ` Shawn Guo 2020-10-28 8:28 ` Shawn Guo 2020-09-18 11:29 ` [PATCH 09/13] ARM: dts: imx7-mba7: add audio support Matthias Schiffer 2020-09-18 11:29 ` Matthias Schiffer 2020-10-28 8:30 ` Shawn Guo 2020-10-28 8:30 ` Shawn Guo 2020-09-18 11:29 ` [PATCH 10/13] ARM: dts: imx7-mba7: add default SPI-NOR flash partition layout Matthias Schiffer 2020-09-18 11:29 ` Matthias Schiffer 2020-09-18 11:29 ` [PATCH 11/13] ARM: dts: imx7-mba7: enable RS485 on UART7 Matthias Schiffer 2020-09-18 11:29 ` Matthias Schiffer 2020-10-28 8:33 ` Shawn Guo 2020-10-28 8:33 ` Shawn Guo 2020-09-18 11:29 ` [PATCH 12/13] ARM: dts: imx7-mba7: specify USB over-current polarity Matthias Schiffer 2020-09-18 11:29 ` Matthias Schiffer 2020-10-28 8:34 ` Shawn Guo 2020-10-28 8:34 ` Shawn Guo 2020-09-18 11:29 ` [PATCH 13/13] ARM: dts: imx7-mba7: set dr_mode to otg on usbotg1 Matthias Schiffer 2020-09-18 11:29 ` Matthias Schiffer 2020-10-28 8:36 ` Shawn Guo 2020-10-28 8:36 ` Shawn Guo 2020-09-23 20:50 ` [PATCH 01/13] dt-bindings: arm: fsl: update TQ-Systems SoMs and boards based on i.MX7 Rob Herring 2020-09-23 20:50 ` Rob Herring 2020-10-22 10:46 ` Matthias Schiffer 2020-10-22 10:46 ` Matthias Schiffer 2020-10-28 8:26 ` Shawn Guo 2020-10-28 8:26 ` Shawn Guo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200918112942.1367-5-matthias.schiffer@ew.tq-group.com \ --to=matthias.schiffer@ew.tq-group.com \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-imx@nxp.com \ --cc=linux-kernel@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.