* [PATCH] system_data_types.7: ffix
@ 2020-09-22 8:58 Alejandro Colomar
2020-09-22 9:10 ` Michael Kerrisk (man-pages)
0 siblings, 1 reply; 4+ messages in thread
From: Alejandro Colomar @ 2020-09-22 8:58 UTC (permalink / raw)
To: mtk.manpages; +Cc: linux-man, Alejandro Colomar
Signed-off-by: Alejandro Colomar <colomar.6.4.3@gmail.com>
---
man7/system_data_types.7 | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/man7/system_data_types.7 b/man7/system_data_types.7
index b026541b0..59c64fb89 100644
--- a/man7/system_data_types.7
+++ b/man7/system_data_types.7
@@ -158,10 +158,10 @@ or
A type used to hold a general identifier.
According to POSIX,
this shall be an integer type that can be used to contain a
-.IR pid_ t ,
-.IR uid_ t ,
+.IR pid_t ,
+.IR uid_t ,
or
-.IR gid_ t .
+.IR gid_t .
.IP
Conforming to: POSIX.1-2001 and later.
.IP
--
2.28.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH] system_data_types.7: ffix
2020-09-22 8:58 [PATCH] system_data_types.7: ffix Alejandro Colomar
@ 2020-09-22 9:10 ` Michael Kerrisk (man-pages)
0 siblings, 0 replies; 4+ messages in thread
From: Michael Kerrisk (man-pages) @ 2020-09-22 9:10 UTC (permalink / raw)
To: Alejandro Colomar; +Cc: linux-man
Hi Alex,
On Tue, 22 Sep 2020 at 10:58, Alejandro Colomar <colomar.6.4.3@gmail.com> wrote:
>
> Signed-off-by: Alejandro Colomar <colomar.6.4.3@gmail.com>
Thanks for checking my patches, and thanks for the fix.
Cheers,
Michael
> ---
> man7/system_data_types.7 | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/man7/system_data_types.7 b/man7/system_data_types.7
> index b026541b0..59c64fb89 100644
> --- a/man7/system_data_types.7
> +++ b/man7/system_data_types.7
> @@ -158,10 +158,10 @@ or
> A type used to hold a general identifier.
> According to POSIX,
> this shall be an integer type that can be used to contain a
> -.IR pid_ t ,
> -.IR uid_ t ,
> +.IR pid_t ,
> +.IR uid_t ,
> or
> -.IR gid_ t .
> +.IR gid_t .
> .IP
> Conforming to: POSIX.1-2001 and later.
> .IP
> --
> 2.28.0
>
--
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] system_data_types.7: ffix
2020-10-27 13:09 Alejandro Colomar
@ 2020-10-27 13:42 ` Michael Kerrisk (man-pages)
0 siblings, 0 replies; 4+ messages in thread
From: Michael Kerrisk (man-pages) @ 2020-10-27 13:42 UTC (permalink / raw)
To: Alejandro Colomar; +Cc: mtk.manpages, linux-man
Hi Alex,
On 10/27/20 2:09 PM, Alejandro Colomar wrote:
> Format section names inside each type.
> Follow the same pattern as in stat.2 (see line 158: ".IR Note :")
>
> Before this ffix, it was visually harder to find sections inside a type.
Yes, better! Applied. Thanks!
Cheers,
Michael
> Signed-off-by: Alejandro Colomar <colomar.6.4.3@gmail.com>
> ---
> man7/system_data_types.7 | 283 ++++++++++++++++++++-------------------
> 1 file changed, 147 insertions(+), 136 deletions(-)
>
> diff --git a/man7/system_data_types.7 b/man7/system_data_types.7
> index e1e8f01ca..e93495eea 100644
> --- a/man7/system_data_types.7
> +++ b/man7/system_data_types.7
> @@ -54,7 +54,7 @@ system_data_types \- overview of system data types
> .TP
> .I aiocb
> .RS
> -Include:
> +.IR Include :
> .IR <aio.h> .
> .PP
> .EX
> @@ -72,10 +72,10 @@ struct aiocb {
> For further information about this structure, see
> .BR aio (7).
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR aio_cancel (3),
> .BR aio_error (3),
> .BR aio_fsync (3),
> @@ -89,7 +89,7 @@ See also:
> .TP
> .I clock_t
> .RS
> -Include:
> +.IR Include :
> .I <time.h>
> or
> .IR <sys/types.h> .
> @@ -103,10 +103,10 @@ Used for system time in clock ticks or
> According to POSIX,
> it shall be an integer type or a real-floating type.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR times (2),
> .BR clock (3)
> .RE
> @@ -114,7 +114,7 @@ See also:
> .TP
> .I clockid_t
> .RS
> -Include:
> +.IR Include :
> .IR <sys/types.h> .
> Alternatively,
> .IR <time.h> .
> @@ -123,10 +123,10 @@ Used for clock ID type in the clock and timer functions.
> According to POSIX,
> it shall be defined as an arithmetic type.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR clock_adjtime (2),
> .BR clock_getres (2),
> .BR clock_nanosleep (2),
> @@ -137,7 +137,7 @@ See also:
> .TP
> .I dev_t
> .RS
> -Include:
> +.IR Include :
> .IR <sys/types.h> .
> Alternatively,
> .IR <sys/stat.h> .
> @@ -148,10 +148,10 @@ it shall be an integer type.
> For further details of this type, see
> .BR makedev (3).
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR mknod (2),
> .BR stat (2)
> .RE
> @@ -159,7 +159,7 @@ See also:
> .TP
> .I div_t
> .RS
> -Include:
> +.IR Include :
> .IR <stdlib.h> .
> .PP
> .EX
> @@ -173,17 +173,17 @@ It is the type of the value returned by the
> .BR div (3)
> function.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR div (3)
> .RE
> .\"------------------------------------- double_t ---------------------/
> .TP
> .I double_t
> .RS
> -Include:
> +.IR Include :
> .IR <math.h> .
> .PP
> The implementation's most efficient floating type at least as wide as
> @@ -214,10 +214,11 @@ the type of
> .I double_t
> is implementation-defined.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -See also the
> +.IR "See also" :
> +the
> .I float_t
> type in this page.
> .RE
> @@ -225,7 +226,7 @@ type in this page.
> .TP
> .I fd_set
> .RS
> -Include:
> +.IR Include :
> .IR <sys/select.h> .
> Alternatively,
> .IR <sys/time.h> .
> @@ -237,61 +238,61 @@ the maximum number of file descriptors in an
> structure is the value of the macro
> .BR FD_SETSIZE .
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR select (2)
> .RE
> .\"------------------------------------- fenv_t -----------------------/
> .TP
> .I fenv_t
> .RS
> -Include:
> +.IR Include :
> .IR <fenv.h> .
> .PP
> This type represents the entire floating-point environment,
> including control modes and status flags; for further details, see
> .BR fenv (3).
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR fenv (3)
> .RE
> .\"------------------------------------- fexcept_t --------------------/
> .TP
> .I fexcept_t
> .RS
> -Include:
> +.IR Include :
> .IR <fenv.h> .
> .PP
> This type represents the floating-point status flags collectively;
> for further details see
> .BR fenv (3).
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR fenv (3)
> .RE
> .\"------------------------------------- FILE -------------------------/
> .TP
> .I FILE
> .RS
> -Include:
> +.IR Include :
> .IR <stdio.h> .
> Alternatively,
> .IR <wchar.h> .
> .PP
> An object type used for streams.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR fclose (3),
> .BR flockfile (3),
> .BR fopen (3),
> @@ -305,7 +306,7 @@ See also:
> .TP
> .I float_t
> .RS
> -Include:
> +.IR Include :
> .IR <math.h> .
> .PP
> The implementation's most efficient floating type at least as wide as
> @@ -336,10 +337,11 @@ the type of
> .I float_t
> is implementation-defined.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -See also the
> +.IR "See also" :
> +the
> .I double_t
> type in this page.
> .RE
> @@ -347,7 +349,7 @@ type in this page.
> .TP
> .I gid_t
> .RS
> -Include:
> +.IR Include :
> .IR <sys/types.h> .
> Alternatively,
> .IR <grp.h> ,
> @@ -363,10 +365,10 @@ A type used to hold group IDs.
> According to POSIX,
> this shall be an integer type.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR chown (2),
> .BR getgid (2),
> .BR getegid (2),
> @@ -379,7 +381,7 @@ See also:
> .TP
> .I id_t
> .RS
> -Include:
> +.IR Include :
> .IR <sys/types.h> .
> Alternatively,
> .IR <sys/resource.h> .
> @@ -392,10 +394,10 @@ this shall be an integer type that can be used to contain a
> or
> .IR gid_t .
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR getpriority (2),
> .BR waitid (2)
> .RE
> @@ -403,7 +405,7 @@ See also:
> .TP
> .I imaxdiv_t
> .RS
> -Include:
> +.IR Include :
> .IR <inttypes.h> .
> .PP
> .EX
> @@ -417,17 +419,17 @@ It is the type of the value returned by the
> .BR imaxdiv (3)
> function.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR imaxdiv (3)
> .RE
> .\"------------------------------------- intmax_t ---------------------/
> .TP
> .I intmax_t
> .RS
> -Include:
> +.IR Include :
> .IR <stdint.h> .
> Alternatively,
> .IR <inttypes.h> .
> @@ -462,10 +464,10 @@ for printing
> .I intmax_t
> values.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -Bugs:
> +.IR Bugs :
> .I intmax_t
> is not large enough to represent values of type
> .I __int128
> @@ -475,7 +477,8 @@ is defined and
> .I long long
> is less than 128 bits wide.
> .PP
> -See also the
> +.IR "See also" :
> +the
> .I uintmax_t
> type in this page.
> .RE
> @@ -483,7 +486,7 @@ type in this page.
> .TP
> .IR int N _t
> .RS
> -Include:
> +.IR Include :
> .IR <stdint.h> .
> Alternatively,
> .IR <inttypes.h> .
> @@ -550,10 +553,11 @@ for scanning
> .I int8_t
> values.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -See also the
> +.IR "See also" :
> +the
> .IR intmax_t ,
> .IR uint N _t ,
> and
> @@ -564,7 +568,7 @@ types in this page.
> .TP
> .I intptr_t
> .RS
> -Include:
> +.IR Include :
> .IR <stdint.h> .
> Alternatively,
> .IR <inttypes.h> .
> @@ -615,10 +619,11 @@ for scanning
> .I intptr_t
> values.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -See also the
> +.IR "See also" :
> +the
> .I uintptr_t
> and
> .I void *
> @@ -628,7 +633,7 @@ types in this page.
> .TP
> .I lconv
> .RS
> -Include:
> +.IR Include :
> .IR <locale.h> .
> .PP
> .EX
> @@ -664,10 +669,10 @@ Contains members related to the formatting of numeric values.
> In the "C" locale, its members have the values
> shown in the comments above.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C11 and later; POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR setlocale (3),
> .BR localeconv (3),
> .BR charsets (5),
> @@ -677,7 +682,7 @@ See also:
> .TP
> .I ldiv_t
> .RS
> -Include:
> +.IR Include :
> .IR <stdlib.h> .
> .PP
> .EX
> @@ -691,17 +696,17 @@ It is the type of the value returned by the
> .BR ldiv (3)
> function.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR ldiv (3)
> .RE
> .\"------------------------------------- lldiv_t ----------------------/
> .TP
> .I lldiv_t
> .RS
> -Include:
> +.IR Include :
> .IR <stdlib.h> .
> .PP
> .EX
> @@ -715,17 +720,17 @@ It is the type of the value returned by the
> .BR lldiv (3)
> function.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR lldiv (3)
> .RE
> .\"------------------------------------- off_t ------------------------/
> .TP
> .I off_t
> .RS
> -Include:
> +.IR Include :
> .IR <sys/types.h> .
> Alternatively,
> .IR <aio.h> ,
> @@ -740,7 +745,7 @@ Used for file sizes.
> According to POSIX,
> this shall be a signed integer type.
> .PP
> -Versions:
> +.IR Versions :
> .I <aio.h>
> and
> .I <stdio.h>
> @@ -748,10 +753,10 @@ define
> .I off_t
> since POSIX.1-2008.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .\" .BR fallocate (2),
> .BR lseek (2),
> .BR mmap (2),
> @@ -775,7 +780,7 @@ See also:
> .TP
> .I pid_t
> .RS
> -Include:
> +.IR Include :
> .IR <sys/types.h> .
> Alternatively,
> .IR <fcntl.h> ,
> @@ -800,10 +805,10 @@ where the width of
> is no greater than the width of the type
> .IR long .
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR fork (2),
> .BR getpid (2),
> .BR getppid (2),
> @@ -821,7 +826,7 @@ See also:
> .TP
> .I ptrdiff_t
> .RS
> -Include:
> +.IR Include :
> .IR <stddef.h> .
> .PP
> Used for a count of elements, and array indices.
> @@ -847,10 +852,11 @@ for printing
> .I ptrdiff_t
> values.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -See also the
> +.IR "See also" :
> +the
> .I size_t
> and
> .I ssize_t
> @@ -860,7 +866,7 @@ types in this page.
> .TP
> .I regex_t
> .RS
> -Include:
> +.IR Include :
> .IR <regex.h> .
> .PP
> .EX
> @@ -873,17 +879,17 @@ This is a structure type used in regular expression matching.
> It holds a compiled regular expression, compiled with
> .BR regcomp (3).
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR regex (3)
> .RE
> .\"------------------------------------- regmatch_t -------------------/
> .TP
> .I regmatch_t
> .RS
> -Include:
> +.IR Include :
> .IR <regex.h> .
> .PP
> .EX
> @@ -898,17 +904,17 @@ typedef struct {
> .PP
> This is a structure type used in regular expression matching.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR regexec (3)
> .RE
> .\"------------------------------------- regoff_t ---------------------/
> .TP
> .I regoff_t
> .RS
> -Include:
> +.IR Include :
> .IR <regex.h> .
> .PP
> According to POSIX, it shall be a signed integer type
> @@ -918,7 +924,7 @@ type or a
> .I ssize_t
> type.
> .PP
> -Versions:
> +.IR Versions :
> Prior to POSIX.1-2008, the type was capable of storing
> the largest value that can be stored in either an
> .I off_t
> @@ -926,10 +932,11 @@ type or a
> .I ssize_t
> type.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> POSIX.1-2001 and later.
> .PP
> -See also the
> +.IR "See also" :
> +the
> .I regmatch_t
> structure and the
> .I ptrdiff_t
> @@ -941,7 +948,7 @@ types in this page.
> .TP
> .I sigevent
> .RS
> -Include:
> +.IR Include :
> .IR <signal.h> .
> Alternatively,
> .IR <aio.h> ,
> @@ -964,7 +971,7 @@ struct sigevent {
> For further details about this type, see
> .BR sigevent (7).
> .PP
> -Versions:
> +.IR Versions :
> .I <aio.h>
> and
> .I <time.h>
> @@ -972,10 +979,10 @@ define
> .I sigevent
> since POSIX.1-2008.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR timer_create (2),
> .BR getaddrinfo_a (3),
> .BR lio_listio (3),
> @@ -989,7 +996,7 @@ structure in this page.
> .TP
> .I siginfo_t
> .RS
> -Include:
> +.IR Include :
> .IR <signal.h> .
> Alternatively,
> .IR <sys/wait.h> .
> @@ -1011,10 +1018,10 @@ For further details on this structure
> (including additional, Linux-specific fields), see
> .BR sigaction (2).
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR pidfd_send_signal (2),
> .BR rt_sigqueueinfo (2),
> .BR sigaction (2),
> @@ -1025,7 +1032,7 @@ See also:
> .TP
> .I sigset_t
> .RS
> -Include:
> +.IR Include :
> .IR <signal.h> .
> Alternatively,
> .IR <spawn.h> ,
> @@ -1035,10 +1042,10 @@ or
> This is a type that represents a set of signals.
> According to POSIX, this shall be an integer or structure type.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR epoll_pwait (2),
> .BR ppoll (2),
> .BR pselect (2),
> @@ -1054,7 +1061,7 @@ See also:
> .TP
> .I sigval
> .RS
> -Include:
> +.IR Include :
> .IR <signal.h> .
> .PP
> .EX
> @@ -1066,10 +1073,10 @@ union sigval {
> .PP
> Data passed with a signal.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR pthread_sigqueue (3),
> .BR sigqueue (3),
> .BR sigevent (7)
> @@ -1086,7 +1093,7 @@ in this page.
> .TP
> .I size_t
> .RS
> -Include:
> +.IR Include :
> .I <stddef.h>
> or
> .IR <sys/types.h> .
> @@ -1148,7 +1155,7 @@ for printing
> .I size_t
> values.
> .PP
> -Versions:
> +.IR Versions :
> .IR <aio.h> ,
> .IR <glob.h> ,
> .IR <grp.h> ,
> @@ -1162,10 +1169,10 @@ define
> .I size_t
> since POSIX.1-2008.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR read (2),
> .BR write (2),
> .BR fread (3),
> @@ -1185,7 +1192,7 @@ types in this page.
> .TP
> .I ssize_t
> .RS
> -Include:
> +.IR Include :
> .IR <sys/types.h> .
> Alternatively,
> .IR <aio.h> ,
> @@ -1234,10 +1241,10 @@ by converting the value to
> and using its length modifier
> .RB ( j ).
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR read (2),
> .BR readlink (2),
> .BR readv (2),
> @@ -1255,7 +1262,7 @@ types in this page.
> .TP
> .I suseconds_t
> .RS
> -Include:
> +.IR Include :
> .IR <sys/types.h> .
> Alternatively,
> .IR <sys/select.h> ,
> @@ -1271,10 +1278,11 @@ where the width of
> is no greater than the width of the type
> .IR long .
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> POSIX.1-2001 and later.
> .PP
> -See also the
> +.IR "See also" :
> +the
> .I timeval
> structure in this page.
> .RE
> @@ -1282,7 +1290,7 @@ structure in this page.
> .TP
> .I time_t
> .RS
> -Include:
> +.IR Include :
> .I <time.h>
> or
> .IR <sys/types.h> .
> @@ -1304,16 +1312,16 @@ According to POSIX, it shall be an integer type.
> .\" used an integer type, and POSIX.1-2008 tightened the specification
> .\" to reflect this.
> .PP
> -Versions:
> +.IR Versions :
> .I <sched.h>
> defines
> .I time_t
> since POSIX.1-2008.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR stime (2),
> .BR time (2),
> .BR ctime (3),
> @@ -1323,7 +1331,7 @@ See also:
> .TP
> .I timer_t
> .RS
> -Include:
> +.IR Include :
> .IR <sys/types.h> .
> Alternatively,
> .IR <time.h> .
> @@ -1333,10 +1341,10 @@ Used for timer ID returned by
> According to POSIX,
> there are no defined comparison or assignment operators for this type.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR timer_create (2),
> .BR timer_delete (2),
> .BR timer_getoverrun (2),
> @@ -1346,7 +1354,7 @@ See also:
> .TP
> .I timespec
> .RS
> -Include:
> +.IR Include :
> .IR <time.h> .
> Alternatively,
> .IR <aio.h> ,
> @@ -1366,10 +1374,10 @@ struct timespec {
> .PP
> Describes times in seconds and nanoseconds.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C11 and later; POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR clock_gettime (2),
> .BR clock_nanosleep (2),
> .BR nanosleep (2),
> @@ -1380,7 +1388,7 @@ See also:
> .TP
> .I timeval
> .RS
> -Include:
> +.IR Include :
> .IR <sys/time.h> .
> Alternatively,
> .IR <sys/resource.h> ,
> @@ -1397,10 +1405,10 @@ struct timeval {
> .PP
> Describes times in seconds and microseconds.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR gettimeofday (2),
> .BR select (2),
> .BR utimes (2),
> @@ -1412,7 +1420,7 @@ See also:
> .TP
> .I uid_t
> .RS
> -Include:
> +.IR Include :
> .IR <sys/types.h> .
> Alternatively,
> .IR <pwd.h> ,
> @@ -1427,10 +1435,10 @@ A type used to hold user IDs.
> According to POSIX,
> this shall be an integer type.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR chown (2),
> .BR getuid (2),
> .BR geteuid (2),
> @@ -1442,7 +1450,7 @@ See also:
> .TP
> .I uintmax_t
> .RS
> -Include:
> +.IR Include :
> .IR <stdint.h> .
> Alternatively,
> .IR <inttypes.h> .
> @@ -1476,10 +1484,10 @@ for printing
> .I uintmax_t
> values.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -Bugs:
> +.IR Bugs :
> .I uintmax_t
> is not large enough to represent values of type
> .I unsigned __int128
> @@ -1489,7 +1497,8 @@ is defined and
> .I unsigned long long
> is less than 128 bits wide.
> .PP
> -See also the
> +.IR "See also" :
> +the
> .I intmax_t
> type in this page.
> .RE
> @@ -1497,7 +1506,7 @@ type in this page.
> .TP
> .IR uint N _t
> .RS
> -Include:
> +.IR Include :
> .IR <stdint.h> .
> Alternatively,
> .IR <inttypes.h> .
> @@ -1567,10 +1576,11 @@ for scanning
> .I uint16_t
> values.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -See also the
> +.IR "See also" :
> +the
> .IR intmax_t ,
> .IR int N _t ,
> and
> @@ -1581,7 +1591,7 @@ types in this page.
> .TP
> .I uintptr_t
> .RS
> -Include:
> +.IR Include :
> .IR <stdint.h> .
> Alternatively,
> .IR <inttypes.h> .
> @@ -1635,10 +1645,11 @@ for scanning
> .I uintptr_t
> values.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -See also the
> +.IR "See also" :
> +the
> .I intptr_t
> and
> .I void *
> @@ -1648,7 +1659,7 @@ types in this page.
> .TP
> .I va_list
> .RS
> -Include:
> +.IR Include :
> .IR <stdarg> .
> Alternatively,
> .IR <stdio.h> ,
> @@ -1666,10 +1677,10 @@ and
> .BR va_end (3)
> to traverse the list of arguments.
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR va_start (3),
> .BR va_arg (3),
> .BR va_copy (3),
> @@ -1728,16 +1739,16 @@ and the
> families of functions is
> .BR p .
> .PP
> -Versions:
> +.IR Versions :
> The POSIX requirement about compatibility between
> .I void *
> and function pointers was added in
> POSIX.1-2008 Technical Corrigendum 1 (2013).
> .PP
> -Conforming to:
> +.IR "Conforming to" :
> C99 and later; POSIX.1-2001 and later.
> .PP
> -See also:
> +.IR "See also" :
> .BR malloc (3),
> .BR memcmp (3),
> .BR memcpy (3),
>
--
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] system_data_types.7: ffix
@ 2020-10-27 13:09 Alejandro Colomar
2020-10-27 13:42 ` Michael Kerrisk (man-pages)
0 siblings, 1 reply; 4+ messages in thread
From: Alejandro Colomar @ 2020-10-27 13:09 UTC (permalink / raw)
To: mtk.manpages; +Cc: Alejandro Colomar, linux-man
Format section names inside each type.
Follow the same pattern as in stat.2 (see line 158: ".IR Note :")
Before this ffix, it was visually harder to find sections inside a type.
Signed-off-by: Alejandro Colomar <colomar.6.4.3@gmail.com>
---
man7/system_data_types.7 | 283 ++++++++++++++++++++-------------------
1 file changed, 147 insertions(+), 136 deletions(-)
diff --git a/man7/system_data_types.7 b/man7/system_data_types.7
index e1e8f01ca..e93495eea 100644
--- a/man7/system_data_types.7
+++ b/man7/system_data_types.7
@@ -54,7 +54,7 @@ system_data_types \- overview of system data types
.TP
.I aiocb
.RS
-Include:
+.IR Include :
.IR <aio.h> .
.PP
.EX
@@ -72,10 +72,10 @@ struct aiocb {
For further information about this structure, see
.BR aio (7).
.PP
-Conforming to:
+.IR "Conforming to" :
POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR aio_cancel (3),
.BR aio_error (3),
.BR aio_fsync (3),
@@ -89,7 +89,7 @@ See also:
.TP
.I clock_t
.RS
-Include:
+.IR Include :
.I <time.h>
or
.IR <sys/types.h> .
@@ -103,10 +103,10 @@ Used for system time in clock ticks or
According to POSIX,
it shall be an integer type or a real-floating type.
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR times (2),
.BR clock (3)
.RE
@@ -114,7 +114,7 @@ See also:
.TP
.I clockid_t
.RS
-Include:
+.IR Include :
.IR <sys/types.h> .
Alternatively,
.IR <time.h> .
@@ -123,10 +123,10 @@ Used for clock ID type in the clock and timer functions.
According to POSIX,
it shall be defined as an arithmetic type.
.PP
-Conforming to:
+.IR "Conforming to" :
POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR clock_adjtime (2),
.BR clock_getres (2),
.BR clock_nanosleep (2),
@@ -137,7 +137,7 @@ See also:
.TP
.I dev_t
.RS
-Include:
+.IR Include :
.IR <sys/types.h> .
Alternatively,
.IR <sys/stat.h> .
@@ -148,10 +148,10 @@ it shall be an integer type.
For further details of this type, see
.BR makedev (3).
.PP
-Conforming to:
+.IR "Conforming to" :
POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR mknod (2),
.BR stat (2)
.RE
@@ -159,7 +159,7 @@ See also:
.TP
.I div_t
.RS
-Include:
+.IR Include :
.IR <stdlib.h> .
.PP
.EX
@@ -173,17 +173,17 @@ It is the type of the value returned by the
.BR div (3)
function.
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR div (3)
.RE
.\"------------------------------------- double_t ---------------------/
.TP
.I double_t
.RS
-Include:
+.IR Include :
.IR <math.h> .
.PP
The implementation's most efficient floating type at least as wide as
@@ -214,10 +214,11 @@ the type of
.I double_t
is implementation-defined.
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-See also the
+.IR "See also" :
+the
.I float_t
type in this page.
.RE
@@ -225,7 +226,7 @@ type in this page.
.TP
.I fd_set
.RS
-Include:
+.IR Include :
.IR <sys/select.h> .
Alternatively,
.IR <sys/time.h> .
@@ -237,61 +238,61 @@ the maximum number of file descriptors in an
structure is the value of the macro
.BR FD_SETSIZE .
.PP
-Conforming to:
+.IR "Conforming to" :
POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR select (2)
.RE
.\"------------------------------------- fenv_t -----------------------/
.TP
.I fenv_t
.RS
-Include:
+.IR Include :
.IR <fenv.h> .
.PP
This type represents the entire floating-point environment,
including control modes and status flags; for further details, see
.BR fenv (3).
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR fenv (3)
.RE
.\"------------------------------------- fexcept_t --------------------/
.TP
.I fexcept_t
.RS
-Include:
+.IR Include :
.IR <fenv.h> .
.PP
This type represents the floating-point status flags collectively;
for further details see
.BR fenv (3).
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR fenv (3)
.RE
.\"------------------------------------- FILE -------------------------/
.TP
.I FILE
.RS
-Include:
+.IR Include :
.IR <stdio.h> .
Alternatively,
.IR <wchar.h> .
.PP
An object type used for streams.
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR fclose (3),
.BR flockfile (3),
.BR fopen (3),
@@ -305,7 +306,7 @@ See also:
.TP
.I float_t
.RS
-Include:
+.IR Include :
.IR <math.h> .
.PP
The implementation's most efficient floating type at least as wide as
@@ -336,10 +337,11 @@ the type of
.I float_t
is implementation-defined.
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-See also the
+.IR "See also" :
+the
.I double_t
type in this page.
.RE
@@ -347,7 +349,7 @@ type in this page.
.TP
.I gid_t
.RS
-Include:
+.IR Include :
.IR <sys/types.h> .
Alternatively,
.IR <grp.h> ,
@@ -363,10 +365,10 @@ A type used to hold group IDs.
According to POSIX,
this shall be an integer type.
.PP
-Conforming to:
+.IR "Conforming to" :
POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR chown (2),
.BR getgid (2),
.BR getegid (2),
@@ -379,7 +381,7 @@ See also:
.TP
.I id_t
.RS
-Include:
+.IR Include :
.IR <sys/types.h> .
Alternatively,
.IR <sys/resource.h> .
@@ -392,10 +394,10 @@ this shall be an integer type that can be used to contain a
or
.IR gid_t .
.PP
-Conforming to:
+.IR "Conforming to" :
POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR getpriority (2),
.BR waitid (2)
.RE
@@ -403,7 +405,7 @@ See also:
.TP
.I imaxdiv_t
.RS
-Include:
+.IR Include :
.IR <inttypes.h> .
.PP
.EX
@@ -417,17 +419,17 @@ It is the type of the value returned by the
.BR imaxdiv (3)
function.
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR imaxdiv (3)
.RE
.\"------------------------------------- intmax_t ---------------------/
.TP
.I intmax_t
.RS
-Include:
+.IR Include :
.IR <stdint.h> .
Alternatively,
.IR <inttypes.h> .
@@ -462,10 +464,10 @@ for printing
.I intmax_t
values.
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-Bugs:
+.IR Bugs :
.I intmax_t
is not large enough to represent values of type
.I __int128
@@ -475,7 +477,8 @@ is defined and
.I long long
is less than 128 bits wide.
.PP
-See also the
+.IR "See also" :
+the
.I uintmax_t
type in this page.
.RE
@@ -483,7 +486,7 @@ type in this page.
.TP
.IR int N _t
.RS
-Include:
+.IR Include :
.IR <stdint.h> .
Alternatively,
.IR <inttypes.h> .
@@ -550,10 +553,11 @@ for scanning
.I int8_t
values.
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-See also the
+.IR "See also" :
+the
.IR intmax_t ,
.IR uint N _t ,
and
@@ -564,7 +568,7 @@ types in this page.
.TP
.I intptr_t
.RS
-Include:
+.IR Include :
.IR <stdint.h> .
Alternatively,
.IR <inttypes.h> .
@@ -615,10 +619,11 @@ for scanning
.I intptr_t
values.
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-See also the
+.IR "See also" :
+the
.I uintptr_t
and
.I void *
@@ -628,7 +633,7 @@ types in this page.
.TP
.I lconv
.RS
-Include:
+.IR Include :
.IR <locale.h> .
.PP
.EX
@@ -664,10 +669,10 @@ Contains members related to the formatting of numeric values.
In the "C" locale, its members have the values
shown in the comments above.
.PP
-Conforming to:
+.IR "Conforming to" :
C11 and later; POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR setlocale (3),
.BR localeconv (3),
.BR charsets (5),
@@ -677,7 +682,7 @@ See also:
.TP
.I ldiv_t
.RS
-Include:
+.IR Include :
.IR <stdlib.h> .
.PP
.EX
@@ -691,17 +696,17 @@ It is the type of the value returned by the
.BR ldiv (3)
function.
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR ldiv (3)
.RE
.\"------------------------------------- lldiv_t ----------------------/
.TP
.I lldiv_t
.RS
-Include:
+.IR Include :
.IR <stdlib.h> .
.PP
.EX
@@ -715,17 +720,17 @@ It is the type of the value returned by the
.BR lldiv (3)
function.
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR lldiv (3)
.RE
.\"------------------------------------- off_t ------------------------/
.TP
.I off_t
.RS
-Include:
+.IR Include :
.IR <sys/types.h> .
Alternatively,
.IR <aio.h> ,
@@ -740,7 +745,7 @@ Used for file sizes.
According to POSIX,
this shall be a signed integer type.
.PP
-Versions:
+.IR Versions :
.I <aio.h>
and
.I <stdio.h>
@@ -748,10 +753,10 @@ define
.I off_t
since POSIX.1-2008.
.PP
-Conforming to:
+.IR "Conforming to" :
POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.\" .BR fallocate (2),
.BR lseek (2),
.BR mmap (2),
@@ -775,7 +780,7 @@ See also:
.TP
.I pid_t
.RS
-Include:
+.IR Include :
.IR <sys/types.h> .
Alternatively,
.IR <fcntl.h> ,
@@ -800,10 +805,10 @@ where the width of
is no greater than the width of the type
.IR long .
.PP
-Conforming to:
+.IR "Conforming to" :
POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR fork (2),
.BR getpid (2),
.BR getppid (2),
@@ -821,7 +826,7 @@ See also:
.TP
.I ptrdiff_t
.RS
-Include:
+.IR Include :
.IR <stddef.h> .
.PP
Used for a count of elements, and array indices.
@@ -847,10 +852,11 @@ for printing
.I ptrdiff_t
values.
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-See also the
+.IR "See also" :
+the
.I size_t
and
.I ssize_t
@@ -860,7 +866,7 @@ types in this page.
.TP
.I regex_t
.RS
-Include:
+.IR Include :
.IR <regex.h> .
.PP
.EX
@@ -873,17 +879,17 @@ This is a structure type used in regular expression matching.
It holds a compiled regular expression, compiled with
.BR regcomp (3).
.PP
-Conforming to:
+.IR "Conforming to" :
POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR regex (3)
.RE
.\"------------------------------------- regmatch_t -------------------/
.TP
.I regmatch_t
.RS
-Include:
+.IR Include :
.IR <regex.h> .
.PP
.EX
@@ -898,17 +904,17 @@ typedef struct {
.PP
This is a structure type used in regular expression matching.
.PP
-Conforming to:
+.IR "Conforming to" :
POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR regexec (3)
.RE
.\"------------------------------------- regoff_t ---------------------/
.TP
.I regoff_t
.RS
-Include:
+.IR Include :
.IR <regex.h> .
.PP
According to POSIX, it shall be a signed integer type
@@ -918,7 +924,7 @@ type or a
.I ssize_t
type.
.PP
-Versions:
+.IR Versions :
Prior to POSIX.1-2008, the type was capable of storing
the largest value that can be stored in either an
.I off_t
@@ -926,10 +932,11 @@ type or a
.I ssize_t
type.
.PP
-Conforming to:
+.IR "Conforming to" :
POSIX.1-2001 and later.
.PP
-See also the
+.IR "See also" :
+the
.I regmatch_t
structure and the
.I ptrdiff_t
@@ -941,7 +948,7 @@ types in this page.
.TP
.I sigevent
.RS
-Include:
+.IR Include :
.IR <signal.h> .
Alternatively,
.IR <aio.h> ,
@@ -964,7 +971,7 @@ struct sigevent {
For further details about this type, see
.BR sigevent (7).
.PP
-Versions:
+.IR Versions :
.I <aio.h>
and
.I <time.h>
@@ -972,10 +979,10 @@ define
.I sigevent
since POSIX.1-2008.
.PP
-Conforming to:
+.IR "Conforming to" :
POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR timer_create (2),
.BR getaddrinfo_a (3),
.BR lio_listio (3),
@@ -989,7 +996,7 @@ structure in this page.
.TP
.I siginfo_t
.RS
-Include:
+.IR Include :
.IR <signal.h> .
Alternatively,
.IR <sys/wait.h> .
@@ -1011,10 +1018,10 @@ For further details on this structure
(including additional, Linux-specific fields), see
.BR sigaction (2).
.PP
-Conforming to:
+.IR "Conforming to" :
POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR pidfd_send_signal (2),
.BR rt_sigqueueinfo (2),
.BR sigaction (2),
@@ -1025,7 +1032,7 @@ See also:
.TP
.I sigset_t
.RS
-Include:
+.IR Include :
.IR <signal.h> .
Alternatively,
.IR <spawn.h> ,
@@ -1035,10 +1042,10 @@ or
This is a type that represents a set of signals.
According to POSIX, this shall be an integer or structure type.
.PP
-Conforming to:
+.IR "Conforming to" :
POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR epoll_pwait (2),
.BR ppoll (2),
.BR pselect (2),
@@ -1054,7 +1061,7 @@ See also:
.TP
.I sigval
.RS
-Include:
+.IR Include :
.IR <signal.h> .
.PP
.EX
@@ -1066,10 +1073,10 @@ union sigval {
.PP
Data passed with a signal.
.PP
-Conforming to:
+.IR "Conforming to" :
POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR pthread_sigqueue (3),
.BR sigqueue (3),
.BR sigevent (7)
@@ -1086,7 +1093,7 @@ in this page.
.TP
.I size_t
.RS
-Include:
+.IR Include :
.I <stddef.h>
or
.IR <sys/types.h> .
@@ -1148,7 +1155,7 @@ for printing
.I size_t
values.
.PP
-Versions:
+.IR Versions :
.IR <aio.h> ,
.IR <glob.h> ,
.IR <grp.h> ,
@@ -1162,10 +1169,10 @@ define
.I size_t
since POSIX.1-2008.
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR read (2),
.BR write (2),
.BR fread (3),
@@ -1185,7 +1192,7 @@ types in this page.
.TP
.I ssize_t
.RS
-Include:
+.IR Include :
.IR <sys/types.h> .
Alternatively,
.IR <aio.h> ,
@@ -1234,10 +1241,10 @@ by converting the value to
and using its length modifier
.RB ( j ).
.PP
-Conforming to:
+.IR "Conforming to" :
POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR read (2),
.BR readlink (2),
.BR readv (2),
@@ -1255,7 +1262,7 @@ types in this page.
.TP
.I suseconds_t
.RS
-Include:
+.IR Include :
.IR <sys/types.h> .
Alternatively,
.IR <sys/select.h> ,
@@ -1271,10 +1278,11 @@ where the width of
is no greater than the width of the type
.IR long .
.PP
-Conforming to:
+.IR "Conforming to" :
POSIX.1-2001 and later.
.PP
-See also the
+.IR "See also" :
+the
.I timeval
structure in this page.
.RE
@@ -1282,7 +1290,7 @@ structure in this page.
.TP
.I time_t
.RS
-Include:
+.IR Include :
.I <time.h>
or
.IR <sys/types.h> .
@@ -1304,16 +1312,16 @@ According to POSIX, it shall be an integer type.
.\" used an integer type, and POSIX.1-2008 tightened the specification
.\" to reflect this.
.PP
-Versions:
+.IR Versions :
.I <sched.h>
defines
.I time_t
since POSIX.1-2008.
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR stime (2),
.BR time (2),
.BR ctime (3),
@@ -1323,7 +1331,7 @@ See also:
.TP
.I timer_t
.RS
-Include:
+.IR Include :
.IR <sys/types.h> .
Alternatively,
.IR <time.h> .
@@ -1333,10 +1341,10 @@ Used for timer ID returned by
According to POSIX,
there are no defined comparison or assignment operators for this type.
.PP
-Conforming to:
+.IR "Conforming to" :
POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR timer_create (2),
.BR timer_delete (2),
.BR timer_getoverrun (2),
@@ -1346,7 +1354,7 @@ See also:
.TP
.I timespec
.RS
-Include:
+.IR Include :
.IR <time.h> .
Alternatively,
.IR <aio.h> ,
@@ -1366,10 +1374,10 @@ struct timespec {
.PP
Describes times in seconds and nanoseconds.
.PP
-Conforming to:
+.IR "Conforming to" :
C11 and later; POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR clock_gettime (2),
.BR clock_nanosleep (2),
.BR nanosleep (2),
@@ -1380,7 +1388,7 @@ See also:
.TP
.I timeval
.RS
-Include:
+.IR Include :
.IR <sys/time.h> .
Alternatively,
.IR <sys/resource.h> ,
@@ -1397,10 +1405,10 @@ struct timeval {
.PP
Describes times in seconds and microseconds.
.PP
-Conforming to:
+.IR "Conforming to" :
POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR gettimeofday (2),
.BR select (2),
.BR utimes (2),
@@ -1412,7 +1420,7 @@ See also:
.TP
.I uid_t
.RS
-Include:
+.IR Include :
.IR <sys/types.h> .
Alternatively,
.IR <pwd.h> ,
@@ -1427,10 +1435,10 @@ A type used to hold user IDs.
According to POSIX,
this shall be an integer type.
.PP
-Conforming to:
+.IR "Conforming to" :
POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR chown (2),
.BR getuid (2),
.BR geteuid (2),
@@ -1442,7 +1450,7 @@ See also:
.TP
.I uintmax_t
.RS
-Include:
+.IR Include :
.IR <stdint.h> .
Alternatively,
.IR <inttypes.h> .
@@ -1476,10 +1484,10 @@ for printing
.I uintmax_t
values.
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-Bugs:
+.IR Bugs :
.I uintmax_t
is not large enough to represent values of type
.I unsigned __int128
@@ -1489,7 +1497,8 @@ is defined and
.I unsigned long long
is less than 128 bits wide.
.PP
-See also the
+.IR "See also" :
+the
.I intmax_t
type in this page.
.RE
@@ -1497,7 +1506,7 @@ type in this page.
.TP
.IR uint N _t
.RS
-Include:
+.IR Include :
.IR <stdint.h> .
Alternatively,
.IR <inttypes.h> .
@@ -1567,10 +1576,11 @@ for scanning
.I uint16_t
values.
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-See also the
+.IR "See also" :
+the
.IR intmax_t ,
.IR int N _t ,
and
@@ -1581,7 +1591,7 @@ types in this page.
.TP
.I uintptr_t
.RS
-Include:
+.IR Include :
.IR <stdint.h> .
Alternatively,
.IR <inttypes.h> .
@@ -1635,10 +1645,11 @@ for scanning
.I uintptr_t
values.
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-See also the
+.IR "See also" :
+the
.I intptr_t
and
.I void *
@@ -1648,7 +1659,7 @@ types in this page.
.TP
.I va_list
.RS
-Include:
+.IR Include :
.IR <stdarg> .
Alternatively,
.IR <stdio.h> ,
@@ -1666,10 +1677,10 @@ and
.BR va_end (3)
to traverse the list of arguments.
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR va_start (3),
.BR va_arg (3),
.BR va_copy (3),
@@ -1728,16 +1739,16 @@ and the
families of functions is
.BR p .
.PP
-Versions:
+.IR Versions :
The POSIX requirement about compatibility between
.I void *
and function pointers was added in
POSIX.1-2008 Technical Corrigendum 1 (2013).
.PP
-Conforming to:
+.IR "Conforming to" :
C99 and later; POSIX.1-2001 and later.
.PP
-See also:
+.IR "See also" :
.BR malloc (3),
.BR memcmp (3),
.BR memcpy (3),
--
2.28.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-10-27 13:42 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-22 8:58 [PATCH] system_data_types.7: ffix Alejandro Colomar
2020-09-22 9:10 ` Michael Kerrisk (man-pages)
2020-10-27 13:09 Alejandro Colomar
2020-10-27 13:42 ` Michael Kerrisk (man-pages)
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.