[PATCH 5.4 00/43] 5.4.68-rc1 review

[PATCH 5.4 00/43] 5.4.68-rc1 review

[Greg Kroah-Hartman]

This is the start of the stable review cycle for the 5.4.68 release.
There are 43 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Sun, 27 Sep 2020 12:47:02 +0000.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.68-rc1.gz
or in the git tree and branch at:
	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 5.4.68-rc1

Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
    iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE

Xunlei Pang <xlpang@linux.alibaba.com>
    mm: memcg: fix memcg reclaim soft lockup

Eric Dumazet <edumazet@google.com>
    net: add __must_check to skb_put_padto()

Eric Dumazet <edumazet@google.com>
    net: qrtr: check skb_put_padto() return value

Florian Fainelli <f.fainelli@gmail.com>
    net: phy: Do not warn in phy_stop() on PHY_DOWN

Florian Fainelli <f.fainelli@gmail.com>
    net: phy: Avoid NPD upon phy_detach() when driver is unbound

Hauke Mehrtens <hauke@hauke-m.de>
    net: lantiq: Disable IRQs only if NAPI gets scheduled

Hauke Mehrtens <hauke@hauke-m.de>
    net: lantiq: Use napi_complete_done()

Hauke Mehrtens <hauke@hauke-m.de>
    net: lantiq: use netif_tx_napi_add() for TX NAPI

Hauke Mehrtens <hauke@hauke-m.de>
    net: lantiq: Wake TX queue again

Michael Chan <michael.chan@broadcom.com>
    bnxt_en: Protect bnxt_set_eee() and bnxt_set_pauseparam() with mutex.

Edwin Peer <edwin.peer@broadcom.com>
    bnxt_en: return proper error codes in bnxt_show_temp

Tariq Toukan <tariqt@mellanox.com>
    net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported

Maor Dickman <maord@mellanox.com>
    net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported

Xin Long <lucien.xin@gmail.com>
    tipc: use skb_unshare() instead in tipc_buf_append()

Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
    tipc: fix shutdown() of connection oriented socket

Peilin Ye <yepeilin.cs@gmail.com>
    tipc: Fix memory leak in tipc_group_create_member()

Vinicius Costa Gomes <vinicius.gomes@intel.com>
    taprio: Fix allowing too small intervals

Jakub Kicinski <kuba@kernel.org>
    nfp: use correct define to return NONE fec

Henry Ptasinski <hptasinski@google.com>
    net: sctp: Fix IPv6 ancestor_size calc in sctp_copy_descendant

Yunsheng Lin <linyunsheng@huawei.com>
    net: sch_generic: aviod concurrent reset and enqueue op for lockless qdisc

Maor Gottlieb <maorg@nvidia.com>
    net/mlx5: Fix FTE cleanup

Necip Fazil Yildiran <fazilyildiran@gmail.com>
    net: ipv6: fix kconfig dependency warning for IPV6_SEG6_HMAC

Ido Schimmel <idosch@nvidia.com>
    net: Fix bridge enslavement failure

Linus Walleij <linus.walleij@linaro.org>
    net: dsa: rtl8366: Properly clear member config

Petr Machata <petrm@nvidia.com>
    net: DCB: Validate DCB_ATTR_DCB_BUFFER argument

Vladimir Oltean <vladimir.oltean@nxp.com>
    net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU

Eric Dumazet <edumazet@google.com>
    ipv6: avoid lockdep issue in fib6_del()

David Ahern <dsahern@kernel.org>
    ipv4: Update exception handling for multipath routes via same device

David Ahern <dsahern@gmail.com>
    ipv4: Initialize flowi4_multipath_hash in data path

Wei Wang <weiwan@google.com>
    ip: fix tos reflection in ack and reset packets

Dan Carpenter <dan.carpenter@oracle.com>
    hdlc_ppp: add range checks in ppp_cp_parse_cr()

Mark Gray <mark.d.gray@redhat.com>
    geneve: add transport ports in route lookup for geneve

Ganji Aravind <ganji.aravind@chelsio.com>
    cxgb4: Fix offset when clearing filter byte counters

Raju Rangoju <rajur@chelsio.com>
    cxgb4: fix memory leak during module unload

Vasundhara Volam <vasundhara-v.volam@broadcom.com>
    bnxt_en: Fix NULL ptr dereference crash in bnxt_fw_reset_task()

Vasundhara Volam <vasundhara-v.volam@broadcom.com>
    bnxt_en: Avoid sending firmware messages when AER error is detected.

Cong Wang <xiyou.wangcong@gmail.com>
    act_ife: load meta modules before tcf_idr_check_alloc()

Ralph Campbell <rcampbell@nvidia.com>
    mm/thp: fix __split_huge_pmd_locked() for migration PMD

Muchun Song <songmuchun@bytedance.com>
    kprobes: fix kill kprobe which has been marked as gone

Jakub Kicinski <kuba@kernel.org>
    ibmvnic: add missing parenthesis in do_reset()

Mingming Cao <mmc@linux.vnet.ibm.com>
    ibmvnic fix NULL tx_pools and rx_tools issue at do_reset

Mark Salyzyn <salyzyn@android.com>
    af_key: pfkey_dump needs parameter validation


-------------

Diffstat:

 Makefile                                           |  4 +-
 drivers/iommu/Kconfig                              |  2 +-
 drivers/iommu/amd_iommu.c                          | 17 +++++--
 drivers/iommu/amd_iommu_init.c                     | 21 ++++++++-
 drivers/net/dsa/rtl8366.c                          | 20 ++++++---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c          | 32 ++++++++-----
 drivers/net/ethernet/broadcom/bnxt/bnxt.h          |  4 ++
 drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c  | 31 ++++++++-----
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c  |  9 ++--
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_mps.c     |  2 +-
 drivers/net/ethernet/ibm/ibmvnic.c                 | 21 +++++++--
 drivers/net/ethernet/lantiq_xrx200.c               | 21 +++++----
 .../mellanox/mlx5/core/en_accel/tls_stats.c        | 12 +++--
 .../ethernet/mellanox/mlx5/core/eswitch_offloads.c | 52 ++++++++++++----------
 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c  |  8 ++--
 .../net/ethernet/netronome/nfp/nfp_net_ethtool.c   |  4 +-
 drivers/net/geneve.c                               | 37 ++++++++++-----
 drivers/net/phy/phy.c                              |  2 +-
 drivers/net/phy/phy_device.c                       |  3 +-
 drivers/net/wan/hdlc_ppp.c                         | 16 ++++---
 include/linux/skbuff.h                             |  7 +--
 include/net/flow.h                                 |  1 +
 include/net/sctp/structs.h                         |  8 ++--
 kernel/kprobes.c                                   |  9 +++-
 mm/huge_memory.c                                   | 40 ++++++++++-------
 mm/vmscan.c                                        |  8 ++++
 net/bridge/br_vlan.c                               | 27 ++++++-----
 net/core/dev.c                                     |  2 +-
 net/core/filter.c                                  |  1 +
 net/dcb/dcbnl.c                                    |  8 ++++
 net/ipv4/fib_frontend.c                            |  1 +
 net/ipv4/ip_output.c                               |  3 +-
 net/ipv4/route.c                                   | 14 +++---
 net/ipv6/Kconfig                                   |  1 +
 net/ipv6/ip6_fib.c                                 | 13 ++++--
 net/key/af_key.c                                   |  7 +++
 net/qrtr/qrtr.c                                    | 20 +++++----
 net/sched/act_ife.c                                | 44 +++++++++++++-----
 net/sched/sch_generic.c                            | 49 +++++++++++++-------
 net/sched/sch_taprio.c                             | 28 +++++++-----
 net/sctp/socket.c                                  |  9 ++--
 net/tipc/group.c                                   | 14 ++++--
 net/tipc/msg.c                                     |  3 +-
 net/tipc/socket.c                                  |  5 +--
 44 files changed, 429 insertions(+), 211 deletions(-)

[PATCH 5.4 01/43] af_key: pfkey_dump needs parameter validation

[Greg Kroah-Hartman]

From: Mark Salyzyn <salyzyn@android.com>

commit 37bd22420f856fcd976989f1d4f1f7ad28e1fcac upstream.

In pfkey_dump() dplen and splen can both be specified to access the
xfrm_address_t structure out of bounds in__xfrm_state_filter_match()
when it calls addr_match() with the indexes.  Return EINVAL if either
are out of range.

Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: kernel-team@android.com
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/key/af_key.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -1849,6 +1849,13 @@ static int pfkey_dump(struct sock *sk, s
 	if (ext_hdrs[SADB_X_EXT_FILTER - 1]) {
 		struct sadb_x_filter *xfilter = ext_hdrs[SADB_X_EXT_FILTER - 1];
 
+		if ((xfilter->sadb_x_filter_splen >=
+			(sizeof(xfrm_address_t) << 3)) ||
+		    (xfilter->sadb_x_filter_dplen >=
+			(sizeof(xfrm_address_t) << 3))) {
+			mutex_unlock(&pfk->dump_lock);
+			return -EINVAL;
+		}
 		filter = kmalloc(sizeof(*filter), GFP_KERNEL);
 		if (filter == NULL) {
 			mutex_unlock(&pfk->dump_lock);

[PATCH 5.4 02/43] ibmvnic fix NULL tx_pools and rx_tools issue at do_reset

[Greg Kroah-Hartman]

From: Mingming Cao <mmc@linux.vnet.ibm.com>

[ Upstream commit 9f13457377907fa253aef560e1a37e1ca4197f9b ]

At the time of do_rest, ibmvnic tries to re-initalize the tx_pools
and rx_pools to avoid re-allocating the long term buffer. However
there is a window inside do_reset that the tx_pools and
rx_pools were freed before re-initialized making it possible to deference
null pointers.

This patch fix this issue by always check the tx_pool
and rx_pool are not NULL after ibmvnic_login. If so, re-allocating
the pools. This will avoid getting into calling reset_tx/rx_pools with
NULL adapter tx_pools/rx_pools pointer. Also add null pointer check in
reset_tx_pools and reset_rx_pools to safe handle NULL pointer case.

Signed-off-by: Mingming Cao <mmc@linux.vnet.ibm.com>
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ibm/ibmvnic.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index 2d20a48f0ba0a..de45b3709c14e 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -416,6 +416,9 @@ static int reset_rx_pools(struct ibmvnic_adapter *adapter)
 	int i, j, rc;
 	u64 *size_array;
 
+	if (!adapter->rx_pool)
+		return -1;
+
 	size_array = (u64 *)((u8 *)(adapter->login_rsp_buf) +
 		be32_to_cpu(adapter->login_rsp_buf->off_rxadd_buff_size));
 
@@ -586,6 +589,9 @@ static int reset_tx_pools(struct ibmvnic_adapter *adapter)
 	int tx_scrqs;
 	int i, rc;
 
+	if (!adapter->tx_pool)
+		return -1;
+
 	tx_scrqs = be32_to_cpu(adapter->login_rsp_buf->num_txsubm_subcrqs);
 	for (i = 0; i < tx_scrqs; i++) {
 		rc = reset_one_tx_pool(adapter, &adapter->tso_pool[i]);
@@ -1918,7 +1924,10 @@ static int do_reset(struct ibmvnic_adapter *adapter,
 		    adapter->req_rx_add_entries_per_subcrq !=
 		    old_num_rx_slots ||
 		    adapter->req_tx_entries_per_subcrq !=
-		    old_num_tx_slots) {
+		    old_num_tx_slots ||
+		    !adapter->rx_pool ||
+		    !adapter->tso_pool ||
+		    !adapter->tx_pool) {
 			release_rx_pools(adapter);
 			release_tx_pools(adapter);
 			release_napi(adapter);
@@ -1931,10 +1940,14 @@ static int do_reset(struct ibmvnic_adapter *adapter,
 		} else {
 			rc = reset_tx_pools(adapter);
 			if (rc)
+				netdev_dbg(adapter->netdev, "reset tx pools failed (%d)\n",
+						rc);
 				goto out;
 
 			rc = reset_rx_pools(adapter);
 			if (rc)
+				netdev_dbg(adapter->netdev, "reset rx pools failed (%d)\n",
+						rc);
 				goto out;
 		}
 		ibmvnic_disable_irqs(adapter);
-- 
2.25.1

[PATCH 5.4 03/43] ibmvnic: add missing parenthesis in do_reset()

[Greg Kroah-Hartman]

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 8ae4dff882eb879c17bf46574201bd37fc6bc8b5 ]

Indentation and logic clearly show that this code is missing
parenthesis.

Fixes: 9f1345737790 ("ibmvnic fix NULL tx_pools and rx_tools issue at do_reset")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/ibm/ibmvnic.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c
index de45b3709c14e..5329af2337a91 100644
--- a/drivers/net/ethernet/ibm/ibmvnic.c
+++ b/drivers/net/ethernet/ibm/ibmvnic.c
@@ -1939,16 +1939,18 @@ static int do_reset(struct ibmvnic_adapter *adapter,
 
 		} else {
 			rc = reset_tx_pools(adapter);
-			if (rc)
+			if (rc) {
 				netdev_dbg(adapter->netdev, "reset tx pools failed (%d)\n",
 						rc);
 				goto out;
+			}
 
 			rc = reset_rx_pools(adapter);
-			if (rc)
+			if (rc) {
 				netdev_dbg(adapter->netdev, "reset rx pools failed (%d)\n",
 						rc);
 				goto out;
+			}
 		}
 		ibmvnic_disable_irqs(adapter);
 	}
-- 
2.25.1

[PATCH 5.4 04/43] kprobes: fix kill kprobe which has been marked as gone

[Greg Kroah-Hartman]

From: Muchun Song <songmuchun@bytedance.com>

[ Upstream commit b0399092ccebd9feef68d4ceb8d6219a8c0caa05 ]

If a kprobe is marked as gone, we should not kill it again.  Otherwise, we
can disarm the kprobe more than once.  In that case, the statistics of
kprobe_ftrace_enabled can unbalance which can lead to that kprobe do not
work.

Fixes: e8386a0cb22f ("kprobes: support probing module __exit function")
Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Song Liu <songliubraving@fb.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20200822030055.32383-1-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 kernel/kprobes.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index bbff4bccb885d..5646f291eb705 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -2088,6 +2088,9 @@ static void kill_kprobe(struct kprobe *p)
 {
 	struct kprobe *kp;
 
+	if (WARN_ON_ONCE(kprobe_gone(p)))
+		return;
+
 	p->flags |= KPROBE_FLAG_GONE;
 	if (kprobe_aggrprobe(p)) {
 		/*
@@ -2270,7 +2273,10 @@ static int kprobes_module_callback(struct notifier_block *nb,
 	mutex_lock(&kprobe_mutex);
 	for (i = 0; i < KPROBE_TABLE_SIZE; i++) {
 		head = &kprobe_table[i];
-		hlist_for_each_entry_rcu(p, head, hlist)
+		hlist_for_each_entry_rcu(p, head, hlist) {
+			if (kprobe_gone(p))
+				continue;
+
 			if (within_module_init((unsigned long)p->addr, mod) ||
 			    (checkcore &&
 			     within_module_core((unsigned long)p->addr, mod))) {
@@ -2287,6 +2293,7 @@ static int kprobes_module_callback(struct notifier_block *nb,
 				 */
 				kill_kprobe(p);
 			}
+		}
 	}
 	mutex_unlock(&kprobe_mutex);
 	return NOTIFY_DONE;
-- 
2.25.1

[PATCH 5.4 05/43] mm/thp: fix __split_huge_pmd_locked() for migration PMD

[Greg Kroah-Hartman]

From: Ralph Campbell <rcampbell@nvidia.com>

[ Upstream commit ec0abae6dcdf7ef88607c869bf35a4b63ce1b370 ]

A migrating transparent huge page has to already be unmapped.  Otherwise,
the page could be modified while it is being copied to a new page and data
could be lost.  The function __split_huge_pmd() checks for a PMD migration
entry before calling __split_huge_pmd_locked() leading one to think that
__split_huge_pmd_locked() can handle splitting a migrating PMD.

However, the code always increments the page->_mapcount and adjusts the
memory control group accounting assuming the page is mapped.

Also, if the PMD entry is a migration PMD entry, the call to
is_huge_zero_pmd(*pmd) is incorrect because it calls pmd_pfn(pmd) instead
of migration_entry_to_pfn(pmd_to_swp_entry(pmd)).  Fix these problems by
checking for a PMD migration entry.

Fixes: 84c3fc4e9c56 ("mm: thp: check pmd migration entry in common path")
Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Bharata B Rao <bharata@linux.ibm.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>	[4.14+]
Link: https://lkml.kernel.org/r/20200903183140.19055-1-rcampbell@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 mm/huge_memory.c | 40 +++++++++++++++++++++++-----------------
 1 file changed, 23 insertions(+), 17 deletions(-)

diff --git a/mm/huge_memory.c b/mm/huge_memory.c
index da9040a6838f8..873de55d93fb2 100644
--- a/mm/huge_memory.c
+++ b/mm/huge_memory.c
@@ -2174,7 +2174,7 @@ static void __split_huge_pmd_locked(struct vm_area_struct *vma, pmd_t *pmd,
 		put_page(page);
 		add_mm_counter(mm, mm_counter_file(page), -HPAGE_PMD_NR);
 		return;
-	} else if (is_huge_zero_pmd(*pmd)) {
+	} else if (pmd_trans_huge(*pmd) && is_huge_zero_pmd(*pmd)) {
 		/*
 		 * FIXME: Do we want to invalidate secondary mmu by calling
 		 * mmu_notifier_invalidate_range() see comments below inside
@@ -2262,27 +2262,33 @@ static void __split_huge_pmd_locked(struct vm_area_struct *vma, pmd_t *pmd,
 		pte = pte_offset_map(&_pmd, addr);
 		BUG_ON(!pte_none(*pte));
 		set_pte_at(mm, addr, pte, entry);
-		atomic_inc(&page[i]._mapcount);
-		pte_unmap(pte);
-	}
-
-	/*
-	 * Set PG_double_map before dropping compound_mapcount to avoid
-	 * false-negative page_mapped().
-	 */
-	if (compound_mapcount(page) > 1 && !TestSetPageDoubleMap(page)) {
-		for (i = 0; i < HPAGE_PMD_NR; i++)
+		if (!pmd_migration)
 			atomic_inc(&page[i]._mapcount);
+		pte_unmap(pte);
 	}
 
-	if (atomic_add_negative(-1, compound_mapcount_ptr(page))) {
-		/* Last compound_mapcount is gone. */
-		__dec_node_page_state(page, NR_ANON_THPS);
-		if (TestClearPageDoubleMap(page)) {
-			/* No need in mapcount reference anymore */
+	if (!pmd_migration) {
+		/*
+		 * Set PG_double_map before dropping compound_mapcount to avoid
+		 * false-negative page_mapped().
+		 */
+		if (compound_mapcount(page) > 1 &&
+		    !TestSetPageDoubleMap(page)) {
 			for (i = 0; i < HPAGE_PMD_NR; i++)
-				atomic_dec(&page[i]._mapcount);
+				atomic_inc(&page[i]._mapcount);
+		}
+
+		lock_page_memcg(page);
+		if (atomic_add_negative(-1, compound_mapcount_ptr(page))) {
+			/* Last compound_mapcount is gone. */
+			__dec_lruvec_page_state(page, NR_ANON_THPS);
+			if (TestClearPageDoubleMap(page)) {
+				/* No need in mapcount reference anymore */
+				for (i = 0; i < HPAGE_PMD_NR; i++)
+					atomic_dec(&page[i]._mapcount);
+			}
 		}
+		unlock_page_memcg(page);
 	}
 
 	smp_wmb(); /* make pte visible before pmd */
-- 
2.25.1

[PATCH 5.4 06/43] act_ife: load meta modules before tcf_idr_check_alloc()

[Greg Kroah-Hartman]

From: Cong Wang <xiyou.wangcong@gmail.com>

[ Upstream commit cc8e58f8325cdf14b9516b61c384cdfd02a4f408 ]

The following deadlock scenario is triggered by syzbot:

Thread A:				Thread B:
tcf_idr_check_alloc()
...
populate_metalist()
  rtnl_unlock()
					rtnl_lock()
					...
  request_module()			tcf_idr_check_alloc()
  rtnl_lock()

At this point, thread A is waiting for thread B to release RTNL
lock, while thread B is waiting for thread A to commit the IDR
change with tcf_idr_insert() later.

Break this deadlock situation by preloading ife modules earlier,
before tcf_idr_check_alloc(), this is fine because we only need
to load modules we need potentially.

Reported-and-tested-by: syzbot+80e32b5d1f9923f8ace6@syzkaller.appspotmail.com
Fixes: 0190c1d452a9 ("net: sched: atomically check-allocate action")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/act_ife.c |   44 ++++++++++++++++++++++++++++++++++----------
 1 file changed, 34 insertions(+), 10 deletions(-)

--- a/net/sched/act_ife.c
+++ b/net/sched/act_ife.c
@@ -436,6 +436,25 @@ static void tcf_ife_cleanup(struct tc_ac
 		kfree_rcu(p, rcu);
 }
 
+static int load_metalist(struct nlattr **tb, bool rtnl_held)
+{
+	int i;
+
+	for (i = 1; i < max_metacnt; i++) {
+		if (tb[i]) {
+			void *val = nla_data(tb[i]);
+			int len = nla_len(tb[i]);
+			int rc;
+
+			rc = load_metaops_and_vet(i, val, len, rtnl_held);
+			if (rc != 0)
+				return rc;
+		}
+	}
+
+	return 0;
+}
+
 static int populate_metalist(struct tcf_ife_info *ife, struct nlattr **tb,
 			     bool exists, bool rtnl_held)
 {
@@ -449,10 +468,6 @@ static int populate_metalist(struct tcf_
 			val = nla_data(tb[i]);
 			len = nla_len(tb[i]);
 
-			rc = load_metaops_and_vet(i, val, len, rtnl_held);
-			if (rc != 0)
-				return rc;
-
 			rc = add_metainfo(ife, i, val, len, exists);
 			if (rc)
 				return rc;
@@ -508,6 +523,21 @@ static int tcf_ife_init(struct net *net,
 	if (!p)
 		return -ENOMEM;
 
+	if (tb[TCA_IFE_METALST]) {
+		err = nla_parse_nested_deprecated(tb2, IFE_META_MAX,
+						  tb[TCA_IFE_METALST], NULL,
+						  NULL);
+		if (err) {
+			kfree(p);
+			return err;
+		}
+		err = load_metalist(tb2, rtnl_held);
+		if (err) {
+			kfree(p);
+			return err;
+		}
+	}
+
 	index = parm->index;
 	err = tcf_idr_check_alloc(tn, &index, a, bind);
 	if (err < 0) {
@@ -569,15 +599,9 @@ static int tcf_ife_init(struct net *net,
 	}
 
 	if (tb[TCA_IFE_METALST]) {
-		err = nla_parse_nested_deprecated(tb2, IFE_META_MAX,
-						  tb[TCA_IFE_METALST], NULL,
-						  NULL);
-		if (err)
-			goto metadata_parse_err;
 		err = populate_metalist(ife, tb2, exists, rtnl_held);
 		if (err)
 			goto metadata_parse_err;
-
 	} else {
 		/* if no passed metadata allow list or passed allow-all
 		 * then here we process by adding as many supported metadatum

[PATCH 5.4 07/43] bnxt_en: Avoid sending firmware messages when AER error is detected.

[Greg Kroah-Hartman]

From: Vasundhara Volam <vasundhara-v.volam@broadcom.com>

[ Upstream commit b340dc680ed48dcc05b56e1ebe1b9535813c3ee0 ]

When the driver goes through PCIe AER reset in error state, all
firmware messages will timeout because the PCIe bus is no longer
accessible.  This can lead to AER reset taking many minutes to
complete as each firmware command takes time to timeout.

Define a new macro BNXT_NO_FW_ACCESS() to skip these firmware messages
when either firmware is in fatal error state or when
pci_channel_offline() is true.  It now takes a more reasonable 20 to
30 seconds to complete AER recovery.

Fixes: b4fff2079d10 ("bnxt_en: Do not send firmware messages if firmware is in error state.")
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c |    6 +++---
 drivers/net/ethernet/broadcom/bnxt/bnxt.h |    4 ++++
 2 files changed, 7 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -4204,7 +4204,7 @@ static int bnxt_hwrm_do_send_msg(struct
 	u32 bar_offset = BNXT_GRCPF_REG_CHIMP_COMM;
 	u16 dst = BNXT_HWRM_CHNL_CHIMP;
 
-	if (test_bit(BNXT_STATE_FW_FATAL_COND, &bp->state))
+	if (BNXT_NO_FW_ACCESS(bp))
 		return -EBUSY;
 
 	if (msg_len > BNXT_HWRM_MAX_REQ_LEN) {
@@ -5539,7 +5539,7 @@ static int hwrm_ring_free_send_msg(struc
 	struct hwrm_ring_free_output *resp = bp->hwrm_cmd_resp_addr;
 	u16 error_code;
 
-	if (test_bit(BNXT_STATE_FW_FATAL_COND, &bp->state))
+	if (BNXT_NO_FW_ACCESS(bp))
 		return 0;
 
 	bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_RING_FREE, cmpl_ring_id, -1);
@@ -7454,7 +7454,7 @@ static int bnxt_set_tpa(struct bnxt *bp,
 
 	if (set_tpa)
 		tpa_flags = bp->flags & BNXT_FLAG_TPA;
-	else if (test_bit(BNXT_STATE_FW_FATAL_COND, &bp->state))
+	else if (BNXT_NO_FW_ACCESS(bp))
 		return 0;
 	for (i = 0; i < bp->nr_vnics; i++) {
 		rc = bnxt_hwrm_vnic_set_tpa(bp, i, tpa_flags);
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -1628,6 +1628,10 @@ struct bnxt {
 #define BNXT_STATE_ABORT_ERR	5
 #define BNXT_STATE_FW_FATAL_COND	6
 
+#define BNXT_NO_FW_ACCESS(bp)					\
+	(test_bit(BNXT_STATE_FW_FATAL_COND, &(bp)->state) ||	\
+	 pci_channel_offline((bp)->pdev))
+
 	struct bnxt_irq	*irq_tbl;
 	int			total_irqs;
 	u8			mac_addr[ETH_ALEN];

[PATCH 5.4 08/43] bnxt_en: Fix NULL ptr dereference crash in bnxt_fw_reset_task()

[Greg Kroah-Hartman]

From: Vasundhara Volam <vasundhara-v.volam@broadcom.com>

[ Upstream commit b16939b59cc00231a75d224fd058d22c9d064976 ]

bnxt_fw_reset_task() which runs from a workqueue can race with
bnxt_remove_one().  For example, if firmware reset and VF FLR are
happening at about the same time.

bnxt_remove_one() already cancels the workqueue and waits for it
to finish, but we need to do this earlier before the devlink
reporters are destroyed.  This will guarantee that
the devlink reporters will always be valid when bnxt_fw_reset_task()
is still running.

Fixes: b148bb238c02 ("bnxt_en: Fix possible crash in bnxt_fw_reset_task().")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -11385,14 +11385,15 @@ static void bnxt_remove_one(struct pci_d
 	if (BNXT_PF(bp))
 		bnxt_sriov_disable(bp);
 
+	clear_bit(BNXT_STATE_IN_FW_RESET, &bp->state);
+	bnxt_cancel_sp_work(bp);
+	bp->sp_event = 0;
+
 	bnxt_dl_fw_reporters_destroy(bp, true);
 	pci_disable_pcie_error_reporting(pdev);
 	unregister_netdev(dev);
 	bnxt_dl_unregister(bp);
 	bnxt_shutdown_tc(bp);
-	clear_bit(BNXT_STATE_IN_FW_RESET, &bp->state);
-	bnxt_cancel_sp_work(bp);
-	bp->sp_event = 0;
 
 	bnxt_clear_int_mode(bp);
 	bnxt_hwrm_func_drv_unrgtr(bp);

[PATCH 5.4 09/43] cxgb4: fix memory leak during module unload

[Greg Kroah-Hartman]

From: Raju Rangoju <rajur@chelsio.com>

[ Upstream commit f4a26a9b311d7ff9db461278faf2869d06496ef8 ]

Fix the memory leak in mps during module unload
path by freeing mps reference entries if the list
adpter->mps_ref is not already empty

Fixes: 28b3870578ef ("cxgb4: Re-work the logic for mps refcounting")
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_mps.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_mps.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_mps.c
@@ -229,7 +229,7 @@ void cxgb4_free_mps_ref_entries(struct a
 {
 	struct mps_entries_ref *mps_entry, *tmp;
 
-	if (!list_empty(&adap->mps_ref))
+	if (list_empty(&adap->mps_ref))
 		return;
 
 	spin_lock(&adap->mps_ref_lock);

[PATCH 5.4 10/43] cxgb4: Fix offset when clearing filter byte counters

[Greg Kroah-Hartman]

From: Ganji Aravind <ganji.aravind@chelsio.com>

[ Upstream commit 94cc242a067a869c29800aa789d38b7676136e50 ]

Pass the correct offset to clear the stale filter hit
bytes counter. Otherwise, the counter starts incrementing
from the stale information, instead of 0.

Fixes: 12b276fbf6e0 ("cxgb4: add support to create hash filters")
Signed-off-by: Ganji Aravind <ganji.aravind@chelsio.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_filter.c
@@ -1617,13 +1617,16 @@ out:
 static int configure_filter_tcb(struct adapter *adap, unsigned int tid,
 				struct filter_entry *f)
 {
-	if (f->fs.hitcnts)
+	if (f->fs.hitcnts) {
 		set_tcb_field(adap, f, tid, TCB_TIMESTAMP_W,
-			      TCB_TIMESTAMP_V(TCB_TIMESTAMP_M) |
+			      TCB_TIMESTAMP_V(TCB_TIMESTAMP_M),
+			      TCB_TIMESTAMP_V(0ULL),
+			      1);
+		set_tcb_field(adap, f, tid, TCB_RTT_TS_RECENT_AGE_W,
 			      TCB_RTT_TS_RECENT_AGE_V(TCB_RTT_TS_RECENT_AGE_M),
-			      TCB_TIMESTAMP_V(0ULL) |
 			      TCB_RTT_TS_RECENT_AGE_V(0ULL),
 			      1);
+	}
 
 	if (f->fs.newdmac)
 		set_tcb_tflag(adap, f, tid, TF_CCTRL_ECE_S, 1,

[PATCH 5.4 11/43] geneve: add transport ports in route lookup for geneve

[Greg Kroah-Hartman]

From: Mark Gray <mark.d.gray@redhat.com>

[ Upstream commit 34beb21594519ce64a55a498c2fe7d567bc1ca20 ]

This patch adds transport ports information for route lookup so that
IPsec can select Geneve tunnel traffic to do encryption. This is
needed for OVS/OVN IPsec with encrypted Geneve tunnels.

This can be tested by configuring a host-host VPN using an IKE
daemon and specifying port numbers. For example, for an
Openswan-type configuration, the following parameters should be
configured on both hosts and IPsec set up as-per normal:

$ cat /etc/ipsec.conf

conn in
...
left=$IP1
right=$IP2
...
leftprotoport=udp/6081
rightprotoport=udp
...
conn out
...
left=$IP1
right=$IP2
...
leftprotoport=udp
rightprotoport=udp/6081
...

The tunnel can then be setup using "ip" on both hosts (but
changing the relevant IP addresses):

$ ip link add tun type geneve id 1000 remote $IP2
$ ip addr add 192.168.0.1/24 dev tun
$ ip link set tun up

This can then be tested by pinging from $IP1:

$ ping 192.168.0.2

Without this patch the traffic is unencrypted on the wire.

Fixes: 2d07dc79fe04 ("geneve: add initial netdev driver for GENEVE tunnels")
Signed-off-by: Qiuyu Xiao <qiuyu.xiao.qyx@gmail.com>
Signed-off-by: Mark Gray <mark.d.gray@redhat.com>
Reviewed-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/geneve.c |   37 +++++++++++++++++++++++++++----------
 1 file changed, 27 insertions(+), 10 deletions(-)

--- a/drivers/net/geneve.c
+++ b/drivers/net/geneve.c
@@ -773,7 +773,8 @@ static struct rtable *geneve_get_v4_rt(s
 				       struct net_device *dev,
 				       struct geneve_sock *gs4,
 				       struct flowi4 *fl4,
-				       const struct ip_tunnel_info *info)
+				       const struct ip_tunnel_info *info,
+				       __be16 dport, __be16 sport)
 {
 	bool use_cache = ip_tunnel_dst_cache_usable(skb, info);
 	struct geneve_dev *geneve = netdev_priv(dev);
@@ -789,6 +790,8 @@ static struct rtable *geneve_get_v4_rt(s
 	fl4->flowi4_proto = IPPROTO_UDP;
 	fl4->daddr = info->key.u.ipv4.dst;
 	fl4->saddr = info->key.u.ipv4.src;
+	fl4->fl4_dport = dport;
+	fl4->fl4_sport = sport;
 
 	tos = info->key.tos;
 	if ((tos == 1) && !geneve->collect_md) {
@@ -823,7 +826,8 @@ static struct dst_entry *geneve_get_v6_d
 					   struct net_device *dev,
 					   struct geneve_sock *gs6,
 					   struct flowi6 *fl6,
-					   const struct ip_tunnel_info *info)
+					   const struct ip_tunnel_info *info,
+					   __be16 dport, __be16 sport)
 {
 	bool use_cache = ip_tunnel_dst_cache_usable(skb, info);
 	struct geneve_dev *geneve = netdev_priv(dev);
@@ -839,6 +843,9 @@ static struct dst_entry *geneve_get_v6_d
 	fl6->flowi6_proto = IPPROTO_UDP;
 	fl6->daddr = info->key.u.ipv6.dst;
 	fl6->saddr = info->key.u.ipv6.src;
+	fl6->fl6_dport = dport;
+	fl6->fl6_sport = sport;
+
 	prio = info->key.tos;
 	if ((prio == 1) && !geneve->collect_md) {
 		prio = ip_tunnel_get_dsfield(ip_hdr(skb), skb);
@@ -885,14 +892,15 @@ static int geneve_xmit_skb(struct sk_buf
 	__be16 sport;
 	int err;
 
-	rt = geneve_get_v4_rt(skb, dev, gs4, &fl4, info);
+	sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true);
+	rt = geneve_get_v4_rt(skb, dev, gs4, &fl4, info,
+			      geneve->info.key.tp_dst, sport);
 	if (IS_ERR(rt))
 		return PTR_ERR(rt);
 
 	skb_tunnel_check_pmtu(skb, &rt->dst,
 			      GENEVE_IPV4_HLEN + info->options_len);
 
-	sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true);
 	if (geneve->collect_md) {
 		tos = ip_tunnel_ecn_encap(key->tos, ip_hdr(skb), skb);
 		ttl = key->ttl;
@@ -947,13 +955,14 @@ static int geneve6_xmit_skb(struct sk_bu
 	__be16 sport;
 	int err;
 
-	dst = geneve_get_v6_dst(skb, dev, gs6, &fl6, info);
+	sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true);
+	dst = geneve_get_v6_dst(skb, dev, gs6, &fl6, info,
+				geneve->info.key.tp_dst, sport);
 	if (IS_ERR(dst))
 		return PTR_ERR(dst);
 
 	skb_tunnel_check_pmtu(skb, dst, GENEVE_IPV6_HLEN + info->options_len);
 
-	sport = udp_flow_src_port(geneve->net, skb, 1, USHRT_MAX, true);
 	if (geneve->collect_md) {
 		prio = ip_tunnel_ecn_encap(key->tos, ip_hdr(skb), skb);
 		ttl = key->ttl;
@@ -1034,13 +1043,18 @@ static int geneve_fill_metadata_dst(stru
 {
 	struct ip_tunnel_info *info = skb_tunnel_info(skb);
 	struct geneve_dev *geneve = netdev_priv(dev);
+	__be16 sport;
 
 	if (ip_tunnel_info_af(info) == AF_INET) {
 		struct rtable *rt;
 		struct flowi4 fl4;
+
 		struct geneve_sock *gs4 = rcu_dereference(geneve->sock4);
+		sport = udp_flow_src_port(geneve->net, skb,
+					  1, USHRT_MAX, true);
 
-		rt = geneve_get_v4_rt(skb, dev, gs4, &fl4, info);
+		rt = geneve_get_v4_rt(skb, dev, gs4, &fl4, info,
+				      geneve->info.key.tp_dst, sport);
 		if (IS_ERR(rt))
 			return PTR_ERR(rt);
 
@@ -1050,9 +1064,13 @@ static int geneve_fill_metadata_dst(stru
 	} else if (ip_tunnel_info_af(info) == AF_INET6) {
 		struct dst_entry *dst;
 		struct flowi6 fl6;
+
 		struct geneve_sock *gs6 = rcu_dereference(geneve->sock6);
+		sport = udp_flow_src_port(geneve->net, skb,
+					  1, USHRT_MAX, true);
 
-		dst = geneve_get_v6_dst(skb, dev, gs6, &fl6, info);
+		dst = geneve_get_v6_dst(skb, dev, gs6, &fl6, info,
+					geneve->info.key.tp_dst, sport);
 		if (IS_ERR(dst))
 			return PTR_ERR(dst);
 
@@ -1063,8 +1081,7 @@ static int geneve_fill_metadata_dst(stru
 		return -EINVAL;
 	}
 
-	info->key.tp_src = udp_flow_src_port(geneve->net, skb,
-					     1, USHRT_MAX, true);
+	info->key.tp_src = sport;
 	info->key.tp_dst = geneve->info.key.tp_dst;
 	return 0;
 }

[PATCH 5.4 12/43] hdlc_ppp: add range checks in ppp_cp_parse_cr()

[Greg Kroah-Hartman]

From: Dan Carpenter <dan.carpenter@oracle.com>

[ Upstream commit 66d42ed8b25b64eb63111a2b8582c5afc8bf1105 ]

There are a couple bugs here:
1) If opt[1] is zero then this results in a forever loop.  If the value
   is less than 2 then it is invalid.
2) It assumes that "len" is more than sizeof(valid_accm) or 6 which can
   result in memory corruption.

In the case of LCP_OPTION_ACCM, then  we should check "opt[1]" instead
of "len" because, if "opt[1]" is less than sizeof(valid_accm) then
"nak_len" gets out of sync and it can lead to memory corruption in the
next iterations through the loop.  In case of LCP_OPTION_MAGIC, the
only valid value for opt[1] is 6, but the code is trying to log invalid
data so we should only discard the data when "len" is less than 6
because that leads to a read overflow.

Reported-by: ChenNan Of Chaitin Security Research Lab  <whutchennan@gmail.com>
Fixes: e022c2f07ae5 ("WAN: new synchronous PPP implementation for generic HDLC.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/wan/hdlc_ppp.c |   16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

--- a/drivers/net/wan/hdlc_ppp.c
+++ b/drivers/net/wan/hdlc_ppp.c
@@ -383,11 +383,8 @@ static void ppp_cp_parse_cr(struct net_d
 	}
 
 	for (opt = data; len; len -= opt[1], opt += opt[1]) {
-		if (len < 2 || len < opt[1]) {
-			dev->stats.rx_errors++;
-			kfree(out);
-			return; /* bad packet, drop silently */
-		}
+		if (len < 2 || opt[1] < 2 || len < opt[1])
+			goto err_out;
 
 		if (pid == PID_LCP)
 			switch (opt[0]) {
@@ -395,6 +392,8 @@ static void ppp_cp_parse_cr(struct net_d
 				continue; /* MRU always OK and > 1500 bytes? */
 
 			case LCP_OPTION_ACCM: /* async control character map */
+				if (opt[1] < sizeof(valid_accm))
+					goto err_out;
 				if (!memcmp(opt, valid_accm,
 					    sizeof(valid_accm)))
 					continue;
@@ -406,6 +405,8 @@ static void ppp_cp_parse_cr(struct net_d
 				}
 				break;
 			case LCP_OPTION_MAGIC:
+				if (len < 6)
+					goto err_out;
 				if (opt[1] != 6 || (!opt[2] && !opt[3] &&
 						    !opt[4] && !opt[5]))
 					break; /* reject invalid magic number */
@@ -424,6 +425,11 @@ static void ppp_cp_parse_cr(struct net_d
 		ppp_cp_event(dev, pid, RCR_GOOD, CP_CONF_ACK, id, req_len, data);
 
 	kfree(out);
+	return;
+
+err_out:
+	dev->stats.rx_errors++;
+	kfree(out);
 }
 
 static int ppp_rx(struct sk_buff *skb)

[PATCH 5.4 13/43] ip: fix tos reflection in ack and reset packets

[Greg Kroah-Hartman]

From: Wei Wang <weiwan@google.com>

[ Upstream commit ba9e04a7ddf4f22a10e05bf9403db6b97743c7bf ]

Currently, in tcp_v4_reqsk_send_ack() and tcp_v4_send_reset(), we
echo the TOS value of the received packets in the response.
However, we do not want to echo the lower 2 ECN bits in accordance
with RFC 3168 6.1.5 robustness principles.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")

Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/ip_output.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/ipv4/ip_output.c
+++ b/net/ipv4/ip_output.c
@@ -74,6 +74,7 @@
 #include <net/icmp.h>
 #include <net/checksum.h>
 #include <net/inetpeer.h>
+#include <net/inet_ecn.h>
 #include <net/lwtunnel.h>
 #include <linux/bpf-cgroup.h>
 #include <linux/igmp.h>
@@ -1699,7 +1700,7 @@ void ip_send_unicast_reply(struct sock *
 	if (IS_ERR(rt))
 		return;
 
-	inet_sk(sk)->tos = arg->tos;
+	inet_sk(sk)->tos = arg->tos & ~INET_ECN_MASK;
 
 	sk->sk_protocol = ip_hdr(skb)->protocol;
 	sk->sk_bound_dev_if = arg->bound_dev_if;

[PATCH 5.4 14/43] ipv4: Initialize flowi4_multipath_hash in data path

[Greg Kroah-Hartman]

From: David Ahern <dsahern@gmail.com>

[ Upstream commit 1869e226a7b3ef75b4f70ede2f1b7229f7157fa4 ]

flowi4_multipath_hash was added by the commit referenced below for
tunnels. Unfortunately, the patch did not initialize the new field
for several fast path lookups that do not initialize the entire flow
struct to 0. Fix those locations. Currently, flowi4_multipath_hash
is random garbage and affects the hash value computed by
fib_multipath_hash for multipath selection.

Fixes: 24ba14406c5c ("route: Add multipath_hash in flowi_common to make user-define hash")
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: wenxu <wenxu@ucloud.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/flow.h      |    1 +
 net/core/filter.c       |    1 +
 net/ipv4/fib_frontend.c |    1 +
 net/ipv4/route.c        |    1 +
 4 files changed, 4 insertions(+)

--- a/include/net/flow.h
+++ b/include/net/flow.h
@@ -116,6 +116,7 @@ static inline void flowi4_init_output(st
 	fl4->saddr = saddr;
 	fl4->fl4_dport = dport;
 	fl4->fl4_sport = sport;
+	fl4->flowi4_multipath_hash = 0;
 }
 
 /* Reset some input parameters after previous lookup */
--- a/net/core/filter.c
+++ b/net/core/filter.c
@@ -4650,6 +4650,7 @@ static int bpf_ipv4_fib_lookup(struct ne
 	fl4.saddr = params->ipv4_src;
 	fl4.fl4_sport = params->sport;
 	fl4.fl4_dport = params->dport;
+	fl4.flowi4_multipath_hash = 0;
 
 	if (flags & BPF_FIB_LOOKUP_DIRECT) {
 		u32 tbid = l3mdev_fib_table_rcu(dev) ? : RT_TABLE_MAIN;
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -372,6 +372,7 @@ static int __fib_validate_source(struct
 	fl4.flowi4_tun_key.tun_id = 0;
 	fl4.flowi4_flags = 0;
 	fl4.flowi4_uid = sock_net_uid(net, NULL);
+	fl4.flowi4_multipath_hash = 0;
 
 	no_addr = idev->ifa_list == NULL;
 
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -2104,6 +2104,7 @@ static int ip_route_input_slow(struct sk
 	fl4.daddr = daddr;
 	fl4.saddr = saddr;
 	fl4.flowi4_uid = sock_net_uid(net, NULL);
+	fl4.flowi4_multipath_hash = 0;
 
 	if (fib4_rules_early_flow_dissect(net, skb, &fl4, &_flkeys)) {
 		flkeys = &_flkeys;

[PATCH 5.4 15/43] ipv4: Update exception handling for multipath routes via same device

[Greg Kroah-Hartman]

From: David Ahern <dsahern@kernel.org>

[ Upstream commit 2fbc6e89b2f1403189e624cabaf73e189c5e50c6 ]

Kfir reported that pmtu exceptions are not created properly for
deployments where multipath routes use the same device.

After some digging I see 2 compounding problems:
1. ip_route_output_key_hash_rcu is updating the flowi4_oif *after*
   the route lookup. This is the second use case where this has
   been a problem (the first is related to use of vti devices with
   VRF). I can not find any reason for the oif to be changed after the
   lookup; the code goes back to the start of git. It does not seem
   logical so remove it.

2. fib_lookups for exceptions do not call fib_select_path to handle
   multipath route selection based on the hash.

The end result is that the fib_lookup used to add the exception
always creates it based using the first leg of the route.

An example topology showing the problem:

                 |  host1
             +------+
             | eth0 |  .209
             +------+
                 |
             +------+
     switch  | br0  |
             +------+
                 |
       +---------+---------+
       | host2             |  host3
   +------+             +------+
   | eth0 | .250        | eth0 | 192.168.252.252
   +------+             +------+

   +-----+             +-----+
   | vti | .2          | vti | 192.168.247.3
   +-----+             +-----+
       \                  /
 =================================
 tunnels
         192.168.247.1/24

for h in host1 host2 host3; do
        ip netns add ${h}
        ip -netns ${h} link set lo up
        ip netns exec ${h} sysctl -wq net.ipv4.ip_forward=1
done

ip netns add switch
ip -netns switch li set lo up
ip -netns switch link add br0 type bridge stp 0
ip -netns switch link set br0 up

for n in 1 2 3; do
        ip -netns switch link add eth-sw type veth peer name eth-h${n}
        ip -netns switch li set eth-h${n} master br0 up
        ip -netns switch li set eth-sw netns host${n} name eth0
done

ip -netns host1 addr add 192.168.252.209/24 dev eth0
ip -netns host1 link set dev eth0 up
ip -netns host1 route add 192.168.247.0/24 \
        nexthop via 192.168.252.250 dev eth0 nexthop via 192.168.252.252 dev eth0

ip -netns host2 addr add 192.168.252.250/24 dev eth0
ip -netns host2 link set dev eth0 up

ip -netns host2 addr add 192.168.252.252/24 dev eth0
ip -netns host3 link set dev eth0 up

ip netns add tunnel
ip -netns tunnel li set lo up
ip -netns tunnel li add br0 type bridge
ip -netns tunnel li set br0 up
for n in $(seq 11 20); do
        ip -netns tunnel addr add dev br0 192.168.247.${n}/24
done

for n in 2 3
do
        ip -netns tunnel link add vti${n} type veth peer name eth${n}
        ip -netns tunnel link set eth${n} mtu 1360 master br0 up
        ip -netns tunnel link set vti${n} netns host${n} mtu 1360 up
        ip -netns host${n} addr add dev vti${n} 192.168.247.${n}/24
done
ip -netns tunnel ro add default nexthop via 192.168.247.2 nexthop via 192.168.247.3

ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.11
ip netns exec host1 ping -M do -s 1400 -c3 -I 192.168.252.209 192.168.247.15
ip -netns host1 ro ls cache

Before this patch the cache always shows exceptions against the first
leg in the multipath route; 192.168.252.250 per this example. Since the
hash has an initial random seed, you may need to vary the final octet
more than what is listed. In my tests, using addresses between 11 and 19
usually found 1 that used both legs.

With this patch, the cache will have exceptions for both legs.

Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions")
Reported-by: Kfir Itzhak <mastertheknife@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv4/route.c |   13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -785,8 +785,10 @@ static void __ip_do_redirect(struct rtab
 			neigh_event_send(n, NULL);
 		} else {
 			if (fib_lookup(net, fl4, &res, 0) == 0) {
-				struct fib_nh_common *nhc = FIB_RES_NHC(res);
+				struct fib_nh_common *nhc;
 
+				fib_select_path(net, &res, fl4, skb);
+				nhc = FIB_RES_NHC(res);
 				update_or_create_fnhe(nhc, fl4->daddr, new_gw,
 						0, false,
 						jiffies + ip_rt_gc_timeout);
@@ -1012,6 +1014,7 @@ out:	kfree_skb(skb);
 static void __ip_rt_update_pmtu(struct rtable *rt, struct flowi4 *fl4, u32 mtu)
 {
 	struct dst_entry *dst = &rt->dst;
+	struct net *net = dev_net(dst->dev);
 	u32 old_mtu = ipv4_mtu(dst);
 	struct fib_result res;
 	bool lock = false;
@@ -1032,9 +1035,11 @@ static void __ip_rt_update_pmtu(struct r
 		return;
 
 	rcu_read_lock();
-	if (fib_lookup(dev_net(dst->dev), fl4, &res, 0) == 0) {
-		struct fib_nh_common *nhc = FIB_RES_NHC(res);
+	if (fib_lookup(net, fl4, &res, 0) == 0) {
+		struct fib_nh_common *nhc;
 
+		fib_select_path(net, &res, fl4, NULL);
+		nhc = FIB_RES_NHC(res);
 		update_or_create_fnhe(nhc, fl4->daddr, 0, mtu, lock,
 				      jiffies + ip_rt_mtu_expires);
 	}
@@ -2626,8 +2631,6 @@ struct rtable *ip_route_output_key_hash_
 	fib_select_path(net, res, fl4, skb);
 
 	dev_out = FIB_RES_DEV(*res);
-	fl4->flowi4_oif = dev_out->ifindex;
-
 
 make_route:
 	rth = __mkroute_output(res, fl4, orig_oif, dev_out, flags);

[PATCH 5.4 16/43] ipv6: avoid lockdep issue in fib6_del()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 843d926b003ea692468c8cc5bea1f9f58dfa8c75 ]

syzbot reported twice a lockdep issue in fib6_del() [1]
which I think is caused by net->ipv6.fib6_null_entry
having a NULL fib6_table pointer.

fib6_del() already checks for fib6_null_entry special
case, we only need to return earlier.

Bug seems to occur very rarely, I have thus chosen
a 'bug origin' that makes backports not too complex.

[1]
WARNING: suspicious RCU usage
5.9.0-rc4-syzkaller #0 Not tainted
-----------------------------
net/ipv6/ip6_fib.c:1996 suspicious rcu_dereference_protected() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
4 locks held by syz-executor.5/8095:
 #0: ffffffff8a7ea708 (rtnl_mutex){+.+.}-{3:3}, at: ppp_release+0x178/0x240 drivers/net/ppp/ppp_generic.c:401
 #1: ffff88804c422dd8 (&net->ipv6.fib6_gc_lock){+.-.}-{2:2}, at: spin_trylock_bh include/linux/spinlock.h:414 [inline]
 #1: ffff88804c422dd8 (&net->ipv6.fib6_gc_lock){+.-.}-{2:2}, at: fib6_run_gc+0x21b/0x2d0 net/ipv6/ip6_fib.c:2312
 #2: ffffffff89bd6a40 (rcu_read_lock){....}-{1:2}, at: __fib6_clean_all+0x0/0x290 net/ipv6/ip6_fib.c:2613
 #3: ffff8880a82e6430 (&tb->tb6_lock){+.-.}-{2:2}, at: spin_lock_bh include/linux/spinlock.h:359 [inline]
 #3: ffff8880a82e6430 (&tb->tb6_lock){+.-.}-{2:2}, at: __fib6_clean_all+0x107/0x290 net/ipv6/ip6_fib.c:2245

stack backtrace:
CPU: 1 PID: 8095 Comm: syz-executor.5 Not tainted 5.9.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x198/0x1fd lib/dump_stack.c:118
 fib6_del+0x12b4/0x1630 net/ipv6/ip6_fib.c:1996
 fib6_clean_node+0x39b/0x570 net/ipv6/ip6_fib.c:2180
 fib6_walk_continue+0x4aa/0x8e0 net/ipv6/ip6_fib.c:2102
 fib6_walk+0x182/0x370 net/ipv6/ip6_fib.c:2150
 fib6_clean_tree+0xdb/0x120 net/ipv6/ip6_fib.c:2230
 __fib6_clean_all+0x120/0x290 net/ipv6/ip6_fib.c:2246
 fib6_clean_all net/ipv6/ip6_fib.c:2257 [inline]
 fib6_run_gc+0x113/0x2d0 net/ipv6/ip6_fib.c:2320
 ndisc_netdev_event+0x217/0x350 net/ipv6/ndisc.c:1805
 notifier_call_chain+0xb5/0x200 kernel/notifier.c:83
 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:2033
 call_netdevice_notifiers_extack net/core/dev.c:2045 [inline]
 call_netdevice_notifiers net/core/dev.c:2059 [inline]
 dev_close_many+0x30b/0x650 net/core/dev.c:1634
 rollback_registered_many+0x3a8/0x1210 net/core/dev.c:9261
 rollback_registered net/core/dev.c:9329 [inline]
 unregister_netdevice_queue+0x2dd/0x570 net/core/dev.c:10410
 unregister_netdevice include/linux/netdevice.h:2774 [inline]
 ppp_release+0x216/0x240 drivers/net/ppp/ppp_generic.c:403
 __fput+0x285/0x920 fs/file_table.c:281
 task_work_run+0xdd/0x190 kernel/task_work.c:141
 tracehook_notify_resume include/linux/tracehook.h:188 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:163 [inline]
 exit_to_user_mode_prepare+0x1e1/0x200 kernel/entry/common.c:190
 syscall_exit_to_user_mode+0x7e/0x2e0 kernel/entry/common.c:265
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 421842edeaf6 ("net/ipv6: Add fib6_null_entry")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: David Ahern <dsahern@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/ip6_fib.c |   13 +++++++++----
 1 file changed, 9 insertions(+), 4 deletions(-)

--- a/net/ipv6/ip6_fib.c
+++ b/net/ipv6/ip6_fib.c
@@ -1896,14 +1896,19 @@ static void fib6_del_route(struct fib6_t
 /* Need to own table->tb6_lock */
 int fib6_del(struct fib6_info *rt, struct nl_info *info)
 {
-	struct fib6_node *fn = rcu_dereference_protected(rt->fib6_node,
-				    lockdep_is_held(&rt->fib6_table->tb6_lock));
-	struct fib6_table *table = rt->fib6_table;
 	struct net *net = info->nl_net;
 	struct fib6_info __rcu **rtp;
 	struct fib6_info __rcu **rtp_next;
+	struct fib6_table *table;
+	struct fib6_node *fn;
 
-	if (!fn || rt == net->ipv6.fib6_null_entry)
+	if (rt == net->ipv6.fib6_null_entry)
+		return -ENOENT;
+
+	table = rt->fib6_table;
+	fn = rcu_dereference_protected(rt->fib6_node,
+				       lockdep_is_held(&table->tb6_lock));
+	if (!fn)
 		return -ENOENT;
 
 	WARN_ON(!(fn->fn_flags & RTN_RTINFO));

[PATCH 5.4 17/43] net: bridge: br_vlan_get_pvid_rcu() should dereference the VLAN group under RCU

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@nxp.com>

[ Upstream commit 99f62a746066fa436aa15d4606a538569540db08 ]

When calling the RCU brother of br_vlan_get_pvid(), lockdep warns:

=============================
WARNING: suspicious RCU usage
5.9.0-rc3-01631-g13c17acb8e38-dirty #814 Not tainted
-----------------------------
net/bridge/br_private.h:1054 suspicious rcu_dereference_protected() usage!

Call trace:
 lockdep_rcu_suspicious+0xd4/0xf8
 __br_vlan_get_pvid+0xc0/0x100
 br_vlan_get_pvid_rcu+0x78/0x108

The warning is because br_vlan_get_pvid_rcu() calls nbp_vlan_group()
which calls rtnl_dereference() instead of rcu_dereference(). In turn,
rtnl_dereference() calls rcu_dereference_protected() which assumes
operation under an RCU write-side critical section, which obviously is
not the case here. So, when the incorrect primitive is used to access
the RCU-protected VLAN group pointer, READ_ONCE() is not used, which may
cause various unexpected problems.

I'm sad to say that br_vlan_get_pvid() and br_vlan_get_pvid_rcu() cannot
share the same implementation. So fix the bug by splitting the 2
functions, and making br_vlan_get_pvid_rcu() retrieve the VLAN groups
under proper locking annotations.

Fixes: 7582f5b70f9a ("bridge: add br_vlan_get_pvid_rcu()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/bridge/br_vlan.c |   27 +++++++++++++++++----------
 1 file changed, 17 insertions(+), 10 deletions(-)

--- a/net/bridge/br_vlan.c
+++ b/net/bridge/br_vlan.c
@@ -1229,11 +1229,13 @@ void br_vlan_get_stats(const struct net_
 	}
 }
 
-static int __br_vlan_get_pvid(const struct net_device *dev,
-			      struct net_bridge_port *p, u16 *p_pvid)
+int br_vlan_get_pvid(const struct net_device *dev, u16 *p_pvid)
 {
 	struct net_bridge_vlan_group *vg;
+	struct net_bridge_port *p;
 
+	ASSERT_RTNL();
+	p = br_port_get_check_rtnl(dev);
 	if (p)
 		vg = nbp_vlan_group(p);
 	else if (netif_is_bridge_master(dev))
@@ -1244,18 +1246,23 @@ static int __br_vlan_get_pvid(const stru
 	*p_pvid = br_get_pvid(vg);
 	return 0;
 }
-
-int br_vlan_get_pvid(const struct net_device *dev, u16 *p_pvid)
-{
-	ASSERT_RTNL();
-
-	return __br_vlan_get_pvid(dev, br_port_get_check_rtnl(dev), p_pvid);
-}
 EXPORT_SYMBOL_GPL(br_vlan_get_pvid);
 
 int br_vlan_get_pvid_rcu(const struct net_device *dev, u16 *p_pvid)
 {
-	return __br_vlan_get_pvid(dev, br_port_get_check_rcu(dev), p_pvid);
+	struct net_bridge_vlan_group *vg;
+	struct net_bridge_port *p;
+
+	p = br_port_get_check_rcu(dev);
+	if (p)
+		vg = nbp_vlan_group_rcu(p);
+	else if (netif_is_bridge_master(dev))
+		vg = br_vlan_group_rcu(netdev_priv(dev));
+	else
+		return -EINVAL;
+
+	*p_pvid = br_get_pvid(vg);
+	return 0;
 }
 EXPORT_SYMBOL_GPL(br_vlan_get_pvid_rcu);
 

[PATCH 5.4 18/43] net: DCB: Validate DCB_ATTR_DCB_BUFFER argument

[Greg Kroah-Hartman]

From: Petr Machata <petrm@nvidia.com>

[ Upstream commit 297e77e53eadb332d5062913447b104a772dc33b ]

The parameter passed via DCB_ATTR_DCB_BUFFER is a struct dcbnl_buffer. The
field prio2buffer is an array of IEEE_8021Q_MAX_PRIORITIES bytes, where
each value is a number of a buffer to direct that priority's traffic to.
That value is however never validated to lie within the bounds set by
DCBX_MAX_BUFFERS. The only driver that currently implements the callback is
mlx5 (maintainers CCd), and that does not do any validation either, in
particual allowing incorrect configuration if the prio2buffer value does
not fit into 4 bits.

Instead of offloading the need to validate the buffer index to drivers, do
it right there in core, and bounce the request if the value is too large.

CC: Parav Pandit <parav@nvidia.com>
CC: Saeed Mahameed <saeedm@nvidia.com>
Fixes: e549f6f9c098 ("net/dcb: Add dcbnl buffer attribute")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/dcb/dcbnl.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/net/dcb/dcbnl.c
+++ b/net/dcb/dcbnl.c
@@ -1426,6 +1426,7 @@ static int dcbnl_ieee_set(struct net_dev
 {
 	const struct dcbnl_rtnl_ops *ops = netdev->dcbnl_ops;
 	struct nlattr *ieee[DCB_ATTR_IEEE_MAX + 1];
+	int prio;
 	int err;
 
 	if (!ops)
@@ -1475,6 +1476,13 @@ static int dcbnl_ieee_set(struct net_dev
 		struct dcbnl_buffer *buffer =
 			nla_data(ieee[DCB_ATTR_DCB_BUFFER]);
 
+		for (prio = 0; prio < ARRAY_SIZE(buffer->prio2buffer); prio++) {
+			if (buffer->prio2buffer[prio] >= DCBX_MAX_BUFFERS) {
+				err = -EINVAL;
+				goto err;
+			}
+		}
+
 		err = ops->dcbnl_setbuffer(netdev, buffer);
 		if (err)
 			goto err;

[PATCH 5.4 19/43] net: dsa: rtl8366: Properly clear member config

[Greg Kroah-Hartman]

From: Linus Walleij <linus.walleij@linaro.org>

[ Upstream commit 4ddcaf1ebb5e4e99240f29d531ee69d4244fe416 ]

When removing a port from a VLAN we are just erasing the
member config for the VLAN, which is wrong: other ports
can be using it.

Just mask off the port and only zero out the rest of the
member config once ports using of the VLAN are removed
from it.

Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/dsa/rtl8366.c |   20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

--- a/drivers/net/dsa/rtl8366.c
+++ b/drivers/net/dsa/rtl8366.c
@@ -452,13 +452,19 @@ int rtl8366_vlan_del(struct dsa_switch *
 				return ret;
 
 			if (vid == vlanmc.vid) {
-				/* clear VLAN member configurations */
-				vlanmc.vid = 0;
-				vlanmc.priority = 0;
-				vlanmc.member = 0;
-				vlanmc.untag = 0;
-				vlanmc.fid = 0;
-
+				/* Remove this port from the VLAN */
+				vlanmc.member &= ~BIT(port);
+				vlanmc.untag &= ~BIT(port);
+				/*
+				 * If no ports are members of this VLAN
+				 * anymore then clear the whole member
+				 * config so it can be reused.
+				 */
+				if (!vlanmc.member && vlanmc.untag) {
+					vlanmc.vid = 0;
+					vlanmc.priority = 0;
+					vlanmc.fid = 0;
+				}
 				ret = smi->ops->set_vlan_mc(smi, i, &vlanmc);
 				if (ret) {
 					dev_err(smi->dev,

[PATCH 5.4 20/43] net: Fix bridge enslavement failure

[Greg Kroah-Hartman]

From: Ido Schimmel <idosch@nvidia.com>

[ Upstream commit e1b9efe6baebe79019a2183176686a0e709388ae ]

When a netdev is enslaved to a bridge, its parent identifier is queried.
This is done so that packets that were already forwarded in hardware
will not be forwarded again by the bridge device between netdevs
belonging to the same hardware instance.

The operation fails when the netdev is an upper of netdevs with
different parent identifiers.

Instead of failing the enslavement, have dev_get_port_parent_id() return
'-EOPNOTSUPP' which will signal the bridge to skip the query operation.
Other callers of the function are not affected by this change.

Fixes: 7e1146e8c10c ("net: devlink: introduce devlink_compat_switch_id_get() helper")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reported-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/core/dev.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -8241,7 +8241,7 @@ int dev_get_port_parent_id(struct net_de
 		if (!first.id_len)
 			first = *ppid;
 		else if (memcmp(&first, ppid, sizeof(*ppid)))
-			return -ENODATA;
+			return -EOPNOTSUPP;
 	}
 
 	return err;

[PATCH 5.4 21/43] net: ipv6: fix kconfig dependency warning for IPV6_SEG6_HMAC

[Greg Kroah-Hartman]

From: Necip Fazil Yildiran <fazilyildiran@gmail.com>

[ Upstream commit db7cd91a4be15e1485d6b58c6afc8761c59c4efb ]

When IPV6_SEG6_HMAC is enabled and CRYPTO is disabled, it results in the
following Kbuild warning:

WARNING: unmet direct dependencies detected for CRYPTO_HMAC
  Depends on [n]: CRYPTO [=n]
  Selected by [y]:
  - IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y]

WARNING: unmet direct dependencies detected for CRYPTO_SHA1
  Depends on [n]: CRYPTO [=n]
  Selected by [y]:
  - IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y]

WARNING: unmet direct dependencies detected for CRYPTO_SHA256
  Depends on [n]: CRYPTO [=n]
  Selected by [y]:
  - IPV6_SEG6_HMAC [=y] && NET [=y] && INET [=y] && IPV6 [=y]

The reason is that IPV6_SEG6_HMAC selects CRYPTO_HMAC, CRYPTO_SHA1, and
CRYPTO_SHA256 without depending on or selecting CRYPTO while those configs
are subordinate to CRYPTO.

Honor the kconfig menu hierarchy to remove kconfig dependency warnings.

Fixes: bf355b8d2c30 ("ipv6: sr: add core files for SR HMAC support")
Signed-off-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/ipv6/Kconfig |    1 +
 1 file changed, 1 insertion(+)

--- a/net/ipv6/Kconfig
+++ b/net/ipv6/Kconfig
@@ -289,6 +289,7 @@ config IPV6_SEG6_LWTUNNEL
 config IPV6_SEG6_HMAC
 	bool "IPv6: Segment Routing HMAC support"
 	depends on IPV6
+	select CRYPTO
 	select CRYPTO_HMAC
 	select CRYPTO_SHA1
 	select CRYPTO_SHA256

[PATCH 5.4 22/43] net/mlx5: Fix FTE cleanup

[Greg Kroah-Hartman]

From: Maor Gottlieb <maorg@nvidia.com>

[ Upstream commit cefc23554fc259114e78a7b0908aac4610ee18eb ]

Currently, when an FTE is allocated, its refcount is decreased to 0
with the purpose it will not be a stand alone steering object and every
rule (destination) of the FTE would increase the refcount.
When mlx5_cleanup_fs is called while not all rules were deleted by the
steering users, it hit refcount underflow on the FTE once clean_tree
calls to tree_remove_node after the deleted rules already decreased
the refcount to 0.

FTE is no longer destroyed implicitly when the last rule (destination)
is deleted. mlx5_del_flow_rules avoids it by increasing the refcount on
the FTE and destroy it explicitly after all rules were deleted. So we
can avoid the refcount underflow by making FTE as stand alone object.
In addition need to set del_hw_func to FTE so the HW object will be
destroyed when the FTE is deleted from the cleanup_tree flow.

refcount_t: underflow; use-after-free.
WARNING: CPU: 2 PID: 15715 at lib/refcount.c:28 refcount_warn_saturate+0xd9/0xe0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
 tree_put_node+0xf2/0x140 [mlx5_core]
 clean_tree+0x4e/0xf0 [mlx5_core]
 clean_tree+0x4e/0xf0 [mlx5_core]
 clean_tree+0x4e/0xf0 [mlx5_core]
 clean_tree+0x5f/0xf0 [mlx5_core]
 clean_tree+0x4e/0xf0 [mlx5_core]
 clean_tree+0x5f/0xf0 [mlx5_core]
 mlx5_cleanup_fs+0x26/0x270 [mlx5_core]
 mlx5_unload+0x2e/0xa0 [mlx5_core]
 mlx5_unload_one+0x51/0x120 [mlx5_core]
 mlx5_devlink_reload_down+0x51/0x90 [mlx5_core]
 devlink_reload+0x39/0x120
 ? devlink_nl_cmd_reload+0x43/0x220
 genl_rcv_msg+0x1e4/0x420
 ? genl_family_rcv_msg_attrs_parse+0x100/0x100
 netlink_rcv_skb+0x47/0x110
 genl_rcv+0x24/0x40
 netlink_unicast+0x217/0x2f0
 netlink_sendmsg+0x30f/0x430
 sock_sendmsg+0x30/0x40
 __sys_sendto+0x10e/0x140
 ? handle_mm_fault+0xc4/0x1f0
 ? do_page_fault+0x33f/0x630
 __x64_sys_sendto+0x24/0x30
 do_syscall_64+0x48/0x130
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 718ce4d601db ("net/mlx5: Consolidate update FTE for all removal changes")
Fixes: bd71b08ec2ee ("net/mlx5: Support multiple updates of steering rules in parallel")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/fs_core.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c
@@ -629,7 +629,7 @@ static struct fs_fte *alloc_fte(struct m
 	fte->action = *flow_act;
 	fte->flow_context = spec->flow_context;
 
-	tree_init_node(&fte->node, NULL, del_sw_fte);
+	tree_init_node(&fte->node, del_hw_fte, del_sw_fte);
 
 	return fte;
 }
@@ -1737,7 +1737,6 @@ skip_search:
 		up_write_ref_node(&g->node, false);
 		rule = add_rule_fg(g, spec, flow_act, dest, dest_num, fte);
 		up_write_ref_node(&fte->node, false);
-		tree_put_node(&fte->node, false);
 		return rule;
 	}
 	rule = ERR_PTR(-ENOENT);
@@ -1837,7 +1836,6 @@ search_again_locked:
 	up_write_ref_node(&g->node, false);
 	rule = add_rule_fg(g, spec, flow_act, dest, dest_num, fte);
 	up_write_ref_node(&fte->node, false);
-	tree_put_node(&fte->node, false);
 	tree_put_node(&g->node, false);
 	return rule;
 
@@ -1930,7 +1928,9 @@ void mlx5_del_flow_rules(struct mlx5_flo
 		up_write_ref_node(&fte->node, false);
 	} else {
 		del_hw_fte(&fte->node);
-		up_write(&fte->node.lock);
+		/* Avoid double call to del_hw_fte */
+		fte->node.del_hw_func = NULL;
+		up_write_ref_node(&fte->node, false);
 		tree_put_node(&fte->node, false);
 	}
 	kfree(handle);

[PATCH 5.4 23/43] net: sch_generic: aviod concurrent reset and enqueue op for lockless qdisc

[Greg Kroah-Hartman]

From: Yunsheng Lin <linyunsheng@huawei.com>

[ Upstream commit 2fb541c862c987d02dfdf28f1545016deecfa0d5 ]

Currently there is concurrent reset and enqueue operation for the
same lockless qdisc when there is no lock to synchronize the
q->enqueue() in __dev_xmit_skb() with the qdisc reset operation in
qdisc_deactivate() called by dev_deactivate_queue(), which may cause
out-of-bounds access for priv->ring[] in hns3 driver if user has
requested a smaller queue num when __dev_xmit_skb() still enqueue a
skb with a larger queue_mapping after the corresponding qdisc is
reset, and call hns3_nic_net_xmit() with that skb later.

Reused the existing synchronize_net() in dev_deactivate_many() to
make sure skb with larger queue_mapping enqueued to old qdisc(which
is saved in dev_queue->qdisc_sleeping) will always be reset when
dev_reset_queue() is called.

Fixes: 6b3ba9146fe6 ("net: sched: allow qdiscs to handle locking")
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_generic.c |   49 ++++++++++++++++++++++++++++++++----------------
 1 file changed, 33 insertions(+), 16 deletions(-)

--- a/net/sched/sch_generic.c
+++ b/net/sched/sch_generic.c
@@ -1126,27 +1126,36 @@ static void dev_deactivate_queue(struct
 				 struct netdev_queue *dev_queue,
 				 void *_qdisc_default)
 {
-	struct Qdisc *qdisc_default = _qdisc_default;
-	struct Qdisc *qdisc;
+	struct Qdisc *qdisc = rtnl_dereference(dev_queue->qdisc);
 
-	qdisc = rtnl_dereference(dev_queue->qdisc);
 	if (qdisc) {
-		bool nolock = qdisc->flags & TCQ_F_NOLOCK;
-
-		if (nolock)
-			spin_lock_bh(&qdisc->seqlock);
-		spin_lock_bh(qdisc_lock(qdisc));
-
 		if (!(qdisc->flags & TCQ_F_BUILTIN))
 			set_bit(__QDISC_STATE_DEACTIVATED, &qdisc->state);
+	}
+}
 
-		rcu_assign_pointer(dev_queue->qdisc, qdisc_default);
-		qdisc_reset(qdisc);
+static void dev_reset_queue(struct net_device *dev,
+			    struct netdev_queue *dev_queue,
+			    void *_unused)
+{
+	struct Qdisc *qdisc;
+	bool nolock;
 
-		spin_unlock_bh(qdisc_lock(qdisc));
-		if (nolock)
-			spin_unlock_bh(&qdisc->seqlock);
-	}
+	qdisc = dev_queue->qdisc_sleeping;
+	if (!qdisc)
+		return;
+
+	nolock = qdisc->flags & TCQ_F_NOLOCK;
+
+	if (nolock)
+		spin_lock_bh(&qdisc->seqlock);
+	spin_lock_bh(qdisc_lock(qdisc));
+
+	qdisc_reset(qdisc);
+
+	spin_unlock_bh(qdisc_lock(qdisc));
+	if (nolock)
+		spin_unlock_bh(&qdisc->seqlock);
 }
 
 static bool some_qdisc_is_busy(struct net_device *dev)
@@ -1207,12 +1216,20 @@ void dev_deactivate_many(struct list_hea
 		dev_watchdog_down(dev);
 	}
 
-	/* Wait for outstanding qdisc-less dev_queue_xmit calls.
+	/* Wait for outstanding qdisc-less dev_queue_xmit calls or
+	 * outstanding qdisc enqueuing calls.
 	 * This is avoided if all devices are in dismantle phase :
 	 * Caller will call synchronize_net() for us
 	 */
 	synchronize_net();
 
+	list_for_each_entry(dev, head, close_list) {
+		netdev_for_each_tx_queue(dev, dev_reset_queue, NULL);
+
+		if (dev_ingress_queue(dev))
+			dev_reset_queue(dev, dev_ingress_queue(dev), NULL);
+	}
+
 	/* Wait for outstanding qdisc_run calls. */
 	list_for_each_entry(dev, head, close_list) {
 		while (some_qdisc_is_busy(dev))

[PATCH 5.4 24/43] net: sctp: Fix IPv6 ancestor_size calc in sctp_copy_descendant

[Greg Kroah-Hartman]

From: Henry Ptasinski <hptasinski@google.com>

[ Upstream commit fe81d9f6182d1160e625894eecb3d7ff0222cac5 ]

When calculating ancestor_size with IPv6 enabled, simply using
sizeof(struct ipv6_pinfo) doesn't account for extra bytes needed for
alignment in the struct sctp6_sock. On x86, there aren't any extra
bytes, but on ARM the ipv6_pinfo structure is aligned on an 8-byte
boundary so there were 4 pad bytes that were omitted from the
ancestor_size calculation.  This would lead to corruption of the
pd_lobby pointers, causing an oops when trying to free the sctp
structure on socket close.

Fixes: 636d25d557d1 ("sctp: not copy sctp_sock pd_lobby in sctp_copy_descendant")
Signed-off-by: Henry Ptasinski <hptasinski@google.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/net/sctp/structs.h |    8 +++++---
 net/sctp/socket.c          |    9 +++------
 2 files changed, 8 insertions(+), 9 deletions(-)

--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -224,12 +224,14 @@ struct sctp_sock {
 		data_ready_signalled:1;
 
 	atomic_t pd_mode;
+
+	/* Fields after this point will be skipped on copies, like on accept
+	 * and peeloff operations
+	 */
+
 	/* Receive to here while partial delivery is in effect. */
 	struct sk_buff_head pd_lobby;
 
-	/* These must be the last fields, as they will skipped on copies,
-	 * like on accept and peeloff operations
-	 */
 	struct list_head auto_asconf_list;
 	int do_auto_asconf;
 };
--- a/net/sctp/socket.c
+++ b/net/sctp/socket.c
@@ -9337,13 +9337,10 @@ void sctp_copy_sock(struct sock *newsk,
 static inline void sctp_copy_descendant(struct sock *sk_to,
 					const struct sock *sk_from)
 {
-	int ancestor_size = sizeof(struct inet_sock) +
-			    sizeof(struct sctp_sock) -
-			    offsetof(struct sctp_sock, pd_lobby);
-
-	if (sk_from->sk_family == PF_INET6)
-		ancestor_size += sizeof(struct ipv6_pinfo);
+	size_t ancestor_size = sizeof(struct inet_sock);
 
+	ancestor_size += sk_from->sk_prot->obj_size;
+	ancestor_size -= offsetof(struct sctp_sock, pd_lobby);
 	__inet_sk_copy_descendant(sk_to, sk_from, ancestor_size);
 }
 

[PATCH 5.4 25/43] nfp: use correct define to return NONE fec

[Greg Kroah-Hartman]

From: Jakub Kicinski <kuba@kernel.org>

[ Upstream commit 5f6857e808a8bd078296575b417c4b9d160b9779 ]

struct ethtool_fecparam carries bitmasks not bit numbers.
We want to return 1 (NONE), not 0.

Fixes: 0d0870938337 ("nfp: implement ethtool FEC mode settings")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c
+++ b/drivers/net/ethernet/netronome/nfp/nfp_net_ethtool.c
@@ -731,8 +731,8 @@ nfp_port_get_fecparam(struct net_device
 	struct nfp_eth_table_port *eth_port;
 	struct nfp_port *port;
 
-	param->active_fec = ETHTOOL_FEC_NONE_BIT;
-	param->fec = ETHTOOL_FEC_NONE_BIT;
+	param->active_fec = ETHTOOL_FEC_NONE;
+	param->fec = ETHTOOL_FEC_NONE;
 
 	port = nfp_port_from_netdev(netdev);
 	eth_port = nfp_port_get_eth_port(port);

[PATCH 5.4 26/43] taprio: Fix allowing too small intervals

[Greg Kroah-Hartman]

From: Vinicius Costa Gomes <vinicius.gomes@intel.com>

[ Upstream commit b5b73b26b3ca34574124ed7ae9c5ba8391a7f176 ]

It's possible that the user specifies an interval that couldn't allow
any packet to be transmitted. This also avoids the issue of the
hrtimer handler starving the other threads because it's running too
often.

The solution is to reject interval sizes that according to the current
link speed wouldn't allow any packet to be transmitted.

Reported-by: syzbot+8267241609ae8c23b248@syzkaller.appspotmail.com
Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler")
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/sched/sch_taprio.c |   28 +++++++++++++++++-----------
 1 file changed, 17 insertions(+), 11 deletions(-)

--- a/net/sched/sch_taprio.c
+++ b/net/sched/sch_taprio.c
@@ -777,9 +777,11 @@ static const struct nla_policy taprio_po
 	[TCA_TAPRIO_ATTR_TXTIME_DELAY]		     = { .type = NLA_U32 },
 };
 
-static int fill_sched_entry(struct nlattr **tb, struct sched_entry *entry,
+static int fill_sched_entry(struct taprio_sched *q, struct nlattr **tb,
+			    struct sched_entry *entry,
 			    struct netlink_ext_ack *extack)
 {
+	int min_duration = length_to_duration(q, ETH_ZLEN);
 	u32 interval = 0;
 
 	if (tb[TCA_TAPRIO_SCHED_ENTRY_CMD])
@@ -794,7 +796,10 @@ static int fill_sched_entry(struct nlatt
 		interval = nla_get_u32(
 			tb[TCA_TAPRIO_SCHED_ENTRY_INTERVAL]);
 
-	if (interval == 0) {
+	/* The interval should allow at least the minimum ethernet
+	 * frame to go out.
+	 */
+	if (interval < min_duration) {
 		NL_SET_ERR_MSG(extack, "Invalid interval for schedule entry");
 		return -EINVAL;
 	}
@@ -804,8 +809,9 @@ static int fill_sched_entry(struct nlatt
 	return 0;
 }
 
-static int parse_sched_entry(struct nlattr *n, struct sched_entry *entry,
-			     int index, struct netlink_ext_ack *extack)
+static int parse_sched_entry(struct taprio_sched *q, struct nlattr *n,
+			     struct sched_entry *entry, int index,
+			     struct netlink_ext_ack *extack)
 {
 	struct nlattr *tb[TCA_TAPRIO_SCHED_ENTRY_MAX + 1] = { };
 	int err;
@@ -819,10 +825,10 @@ static int parse_sched_entry(struct nlat
 
 	entry->index = index;
 
-	return fill_sched_entry(tb, entry, extack);
+	return fill_sched_entry(q, tb, entry, extack);
 }
 
-static int parse_sched_list(struct nlattr *list,
+static int parse_sched_list(struct taprio_sched *q, struct nlattr *list,
 			    struct sched_gate_list *sched,
 			    struct netlink_ext_ack *extack)
 {
@@ -847,7 +853,7 @@ static int parse_sched_list(struct nlatt
 			return -ENOMEM;
 		}
 
-		err = parse_sched_entry(n, entry, i, extack);
+		err = parse_sched_entry(q, n, entry, i, extack);
 		if (err < 0) {
 			kfree(entry);
 			return err;
@@ -862,7 +868,7 @@ static int parse_sched_list(struct nlatt
 	return i;
 }
 
-static int parse_taprio_schedule(struct nlattr **tb,
+static int parse_taprio_schedule(struct taprio_sched *q, struct nlattr **tb,
 				 struct sched_gate_list *new,
 				 struct netlink_ext_ack *extack)
 {
@@ -883,8 +889,8 @@ static int parse_taprio_schedule(struct
 		new->cycle_time = nla_get_s64(tb[TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME]);
 
 	if (tb[TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST])
-		err = parse_sched_list(
-			tb[TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST], new, extack);
+		err = parse_sched_list(q, tb[TCA_TAPRIO_ATTR_SCHED_ENTRY_LIST],
+				       new, extack);
 	if (err < 0)
 		return err;
 
@@ -1474,7 +1480,7 @@ static int taprio_change(struct Qdisc *s
 		goto free_sched;
 	}
 
-	err = parse_taprio_schedule(tb, new_admin, extack);
+	err = parse_taprio_schedule(q, tb, new_admin, extack);
 	if (err < 0)
 		goto free_sched;
 

[PATCH 5.4 27/43] tipc: Fix memory leak in tipc_group_create_member()

[Greg Kroah-Hartman]

From: Peilin Ye <yepeilin.cs@gmail.com>

[ Upstream commit bb3a420d47ab00d7e1e5083286cab15235a96680 ]

tipc_group_add_to_tree() returns silently if `key` matches `nkey` of an
existing node, causing tipc_group_create_member() to leak memory. Let
tipc_group_add_to_tree() return an error in such a case, so that
tipc_group_create_member() can handle it properly.

Fixes: 75da2163dbb6 ("tipc: introduce communication groups")
Reported-and-tested-by: syzbot+f95d90c454864b3b5bc9@syzkaller.appspotmail.com
Cc: Hillf Danton <hdanton@sina.com>
Link: https://syzkaller.appspot.com/bug?id=048390604fe1b60df34150265479202f10e13aff
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/tipc/group.c |   14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)

--- a/net/tipc/group.c
+++ b/net/tipc/group.c
@@ -273,8 +273,8 @@ static struct tipc_member *tipc_group_fi
 	return NULL;
 }
 
-static void tipc_group_add_to_tree(struct tipc_group *grp,
-				   struct tipc_member *m)
+static int tipc_group_add_to_tree(struct tipc_group *grp,
+				  struct tipc_member *m)
 {
 	u64 nkey, key = (u64)m->node << 32 | m->port;
 	struct rb_node **n, *parent = NULL;
@@ -291,10 +291,11 @@ static void tipc_group_add_to_tree(struc
 		else if (key > nkey)
 			n = &(*n)->rb_right;
 		else
-			return;
+			return -EEXIST;
 	}
 	rb_link_node(&m->tree_node, parent, n);
 	rb_insert_color(&m->tree_node, &grp->members);
+	return 0;
 }
 
 static struct tipc_member *tipc_group_create_member(struct tipc_group *grp,
@@ -302,6 +303,7 @@ static struct tipc_member *tipc_group_cr
 						    u32 instance, int state)
 {
 	struct tipc_member *m;
+	int ret;
 
 	m = kzalloc(sizeof(*m), GFP_ATOMIC);
 	if (!m)
@@ -314,8 +316,12 @@ static struct tipc_member *tipc_group_cr
 	m->port = port;
 	m->instance = instance;
 	m->bc_acked = grp->bc_snd_nxt - 1;
+	ret = tipc_group_add_to_tree(grp, m);
+	if (ret < 0) {
+		kfree(m);
+		return NULL;
+	}
 	grp->member_cnt++;
-	tipc_group_add_to_tree(grp, m);
 	tipc_nlist_add(&grp->dests, m->node);
 	m->state = state;
 	return m;

[PATCH 5.4 28/43] tipc: fix shutdown() of connection oriented socket

[Greg Kroah-Hartman]

From: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>

[ Upstream commit a4b5cc9e10803ecba64a7d54c0f47e4564b4a980 ]

I confirmed that the problem fixed by commit 2a63866c8b51a3f7 ("tipc: fix
shutdown() of connectionless socket") also applies to stream socket.

----------
#include <sys/socket.h>
#include <unistd.h>
#include <sys/wait.h>

int main(int argc, char *argv[])
{
        int fds[2] = { -1, -1 };
        socketpair(PF_TIPC, SOCK_STREAM /* or SOCK_DGRAM */, 0, fds);
        if (fork() == 0)
                _exit(read(fds[0], NULL, 1));
        shutdown(fds[0], SHUT_RDWR); /* This must make read() return. */
        wait(NULL); /* To be woken up by _exit(). */
        return 0;
}
----------

Since shutdown(SHUT_RDWR) should affect all processes sharing that socket,
unconditionally setting sk->sk_shutdown to SHUTDOWN_MASK will be the right
behavior.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/tipc/socket.c |    5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -2616,10 +2616,7 @@ static int tipc_shutdown(struct socket *
 
 	trace_tipc_sk_shutdown(sk, NULL, TIPC_DUMP_ALL, " ");
 	__tipc_shutdown(sock, TIPC_CONN_SHUTDOWN);
-	if (tipc_sk_type_connectionless(sk))
-		sk->sk_shutdown = SHUTDOWN_MASK;
-	else
-		sk->sk_shutdown = SEND_SHUTDOWN;
+	sk->sk_shutdown = SHUTDOWN_MASK;
 
 	if (sk->sk_state == TIPC_DISCONNECTING) {
 		/* Discard any unreceived messages */

[PATCH 5.4 29/43] tipc: use skb_unshare() instead in tipc_buf_append()

[Greg Kroah-Hartman]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit ff48b6222e65ebdba5a403ef1deba6214e749193 ]

In tipc_buf_append() it may change skb's frag_list, and it causes
problems when this skb is cloned. skb_unclone() doesn't really
make this skb's flag_list available to change.

Shuang Li has reported an use-after-free issue because of this
when creating quite a few macvlan dev over the same dev, where
the broadcast packets will be cloned and go up to the stack:

 [ ] BUG: KASAN: use-after-free in pskb_expand_head+0x86d/0xea0
 [ ] Call Trace:
 [ ]  dump_stack+0x7c/0xb0
 [ ]  print_address_description.constprop.7+0x1a/0x220
 [ ]  kasan_report.cold.10+0x37/0x7c
 [ ]  check_memory_region+0x183/0x1e0
 [ ]  pskb_expand_head+0x86d/0xea0
 [ ]  process_backlog+0x1df/0x660
 [ ]  net_rx_action+0x3b4/0xc90
 [ ]
 [ ] Allocated by task 1786:
 [ ]  kmem_cache_alloc+0xbf/0x220
 [ ]  skb_clone+0x10a/0x300
 [ ]  macvlan_broadcast+0x2f6/0x590 [macvlan]
 [ ]  macvlan_process_broadcast+0x37c/0x516 [macvlan]
 [ ]  process_one_work+0x66a/0x1060
 [ ]  worker_thread+0x87/0xb10
 [ ]
 [ ] Freed by task 3253:
 [ ]  kmem_cache_free+0x82/0x2a0
 [ ]  skb_release_data+0x2c3/0x6e0
 [ ]  kfree_skb+0x78/0x1d0
 [ ]  tipc_recvmsg+0x3be/0xa40 [tipc]

So fix it by using skb_unshare() instead, which would create a new
skb for the cloned frag and it'll be safe to change its frag_list.
The similar things were also done in sctp_make_reassembled_event(),
which is using skb_copy().

Reported-by: Shuang Li <shuali@redhat.com>
Fixes: 37e22164a8a3 ("tipc: rename and move message reassembly function")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/tipc/msg.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/tipc/msg.c
+++ b/net/tipc/msg.c
@@ -140,7 +140,8 @@ int tipc_buf_append(struct sk_buff **hea
 	if (fragid == FIRST_FRAGMENT) {
 		if (unlikely(head))
 			goto err;
-		if (unlikely(skb_unclone(frag, GFP_ATOMIC)))
+		frag = skb_unshare(frag, GFP_ATOMIC);
+		if (unlikely(!frag))
 			goto err;
 		head = *headbuf = frag;
 		*buf = NULL;

[PATCH 5.4 30/43] net/mlx5e: Enable adding peer miss rules only if merged eswitch is supported

[Greg Kroah-Hartman]

From: Maor Dickman <maord@mellanox.com>

[ Upstream commit 6cec0229ab1959259e71e9a5bbe47c04577950b1 ]

The cited commit creates peer miss group during switchdev mode
initialization in order to handle miss packets correctly while in VF
LAG mode. This is done regardless of FW support of such groups which
could cause rules setups failure later on.

Fix by adding FW capability check before creating peer groups/rule.

Fixes: ac004b832128 ("net/mlx5e: E-Switch, Add peer miss rules")
Signed-off-by: Maor Dickman <maord@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Raed Salem <raeds@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c |   64 ++++++-------
 1 file changed, 34 insertions(+), 30 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
@@ -1143,35 +1143,37 @@ static int esw_create_offloads_fdb_table
 	}
 	esw->fdb_table.offloads.send_to_vport_grp = g;
 
-	/* create peer esw miss group */
-	memset(flow_group_in, 0, inlen);
-
-	esw_set_flow_group_source_port(esw, flow_group_in);
-
-	if (!mlx5_eswitch_vport_match_metadata_enabled(esw)) {
-		match_criteria = MLX5_ADDR_OF(create_flow_group_in,
-					      flow_group_in,
-					      match_criteria);
-
-		MLX5_SET_TO_ONES(fte_match_param, match_criteria,
-				 misc_parameters.source_eswitch_owner_vhca_id);
-
-		MLX5_SET(create_flow_group_in, flow_group_in,
-			 source_eswitch_owner_vhca_id_valid, 1);
-	}
-
-	MLX5_SET(create_flow_group_in, flow_group_in, start_flow_index, ix);
-	MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index,
-		 ix + esw->total_vports - 1);
-	ix += esw->total_vports;
-
-	g = mlx5_create_flow_group(fdb, flow_group_in);
-	if (IS_ERR(g)) {
-		err = PTR_ERR(g);
-		esw_warn(dev, "Failed to create peer miss flow group err(%d)\n", err);
-		goto peer_miss_err;
+	if (MLX5_CAP_ESW(esw->dev, merged_eswitch)) {
+		/* create peer esw miss group */
+		memset(flow_group_in, 0, inlen);
+
+		esw_set_flow_group_source_port(esw, flow_group_in);
+
+		if (!mlx5_eswitch_vport_match_metadata_enabled(esw)) {
+			match_criteria = MLX5_ADDR_OF(create_flow_group_in,
+						      flow_group_in,
+						      match_criteria);
+
+			MLX5_SET_TO_ONES(fte_match_param, match_criteria,
+					 misc_parameters.source_eswitch_owner_vhca_id);
+
+			MLX5_SET(create_flow_group_in, flow_group_in,
+				 source_eswitch_owner_vhca_id_valid, 1);
+		}
+
+		MLX5_SET(create_flow_group_in, flow_group_in, start_flow_index, ix);
+		MLX5_SET(create_flow_group_in, flow_group_in, end_flow_index,
+			 ix + esw->total_vports - 1);
+		ix += esw->total_vports;
+
+		g = mlx5_create_flow_group(fdb, flow_group_in);
+		if (IS_ERR(g)) {
+			err = PTR_ERR(g);
+			esw_warn(dev, "Failed to create peer miss flow group err(%d)\n", err);
+			goto peer_miss_err;
+		}
+		esw->fdb_table.offloads.peer_miss_grp = g;
 	}
-	esw->fdb_table.offloads.peer_miss_grp = g;
 
 	/* create miss group */
 	memset(flow_group_in, 0, inlen);
@@ -1206,7 +1208,8 @@ static int esw_create_offloads_fdb_table
 miss_rule_err:
 	mlx5_destroy_flow_group(esw->fdb_table.offloads.miss_grp);
 miss_err:
-	mlx5_destroy_flow_group(esw->fdb_table.offloads.peer_miss_grp);
+	if (MLX5_CAP_ESW(esw->dev, merged_eswitch))
+		mlx5_destroy_flow_group(esw->fdb_table.offloads.peer_miss_grp);
 peer_miss_err:
 	mlx5_destroy_flow_group(esw->fdb_table.offloads.send_to_vport_grp);
 send_vport_err:
@@ -1229,7 +1232,8 @@ static void esw_destroy_offloads_fdb_tab
 	mlx5_del_flow_rules(esw->fdb_table.offloads.miss_rule_multi);
 	mlx5_del_flow_rules(esw->fdb_table.offloads.miss_rule_uni);
 	mlx5_destroy_flow_group(esw->fdb_table.offloads.send_to_vport_grp);
-	mlx5_destroy_flow_group(esw->fdb_table.offloads.peer_miss_grp);
+	if (MLX5_CAP_ESW(esw->dev, merged_eswitch))
+		mlx5_destroy_flow_group(esw->fdb_table.offloads.peer_miss_grp);
 	mlx5_destroy_flow_group(esw->fdb_table.offloads.miss_grp);
 
 	mlx5_destroy_flow_table(esw->fdb_table.offloads.slow_fdb);

[PATCH 5.4 31/43] net/mlx5e: TLS, Do not expose FPGA TLS counter if not supported

[Greg Kroah-Hartman]

From: Tariq Toukan <tariqt@mellanox.com>

[ Upstream commit 8f0bcd19b1da3f264223abea985b9462e85a3718 ]

The set of TLS TX global SW counters in mlx5e_tls_sw_stats_desc
is updated from all rings by using atomic ops.
This set of stats is used only in the FPGA TLS use case, not in
the Connect-X TLS one, where regular per-ring counters are used.

Do not expose them in the Connect-X use case, as this would cause
counter duplication. For example, tx_tls_drop_no_sync_data would
appear twice in the ethtool stats.

Fixes: d2ead1f360e8 ("net/mlx5e: Add kTLS TX HW offload support")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_stats.c |   12 +++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

--- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_stats.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/tls_stats.c
@@ -35,7 +35,6 @@
 #include <net/sock.h>
 
 #include "en.h"
-#include "accel/tls.h"
 #include "fpga/sdk.h"
 #include "en_accel/tls.h"
 
@@ -51,9 +50,14 @@ static const struct counter_desc mlx5e_t
 
 #define NUM_TLS_SW_COUNTERS ARRAY_SIZE(mlx5e_tls_sw_stats_desc)
 
+static bool is_tls_atomic_stats(struct mlx5e_priv *priv)
+{
+	return priv->tls && !mlx5_accel_is_ktls_device(priv->mdev);
+}
+
 int mlx5e_tls_get_count(struct mlx5e_priv *priv)
 {
-	if (!priv->tls)
+	if (!is_tls_atomic_stats(priv))
 		return 0;
 
 	return NUM_TLS_SW_COUNTERS;
@@ -63,7 +67,7 @@ int mlx5e_tls_get_strings(struct mlx5e_p
 {
 	unsigned int i, idx = 0;
 
-	if (!priv->tls)
+	if (!is_tls_atomic_stats(priv))
 		return 0;
 
 	for (i = 0; i < NUM_TLS_SW_COUNTERS; i++)
@@ -77,7 +81,7 @@ int mlx5e_tls_get_stats(struct mlx5e_pri
 {
 	int i, idx = 0;
 
-	if (!priv->tls)
+	if (!is_tls_atomic_stats(priv))
 		return 0;
 
 	for (i = 0; i < NUM_TLS_SW_COUNTERS; i++)

[PATCH 5.4 32/43] bnxt_en: return proper error codes in bnxt_show_temp

[Greg Kroah-Hartman]

From: Edwin Peer <edwin.peer@broadcom.com>

[ Upstream commit d69753fa1ecb3218b56b022722f7a5822735b876 ]

Returning "unknown" as a temperature value violates the hwmon interface
rules. Appropriate error codes should be returned via device_attribute
show instead. These will ultimately be propagated to the user via the
file system interface.

In addition to the corrected error handling, it is an even better idea to
not present the sensor in sysfs at all if it is known that the read will
definitely fail. Given that temp1_input is currently the only sensor
reported, ensure no hwmon registration if TEMP_MONITOR_QUERY is not
supported or if it will fail due to access permissions. Something smarter
may be needed if and when other sensors are added.

Fixes: 12cce90b934b ("bnxt_en: fix HWRM error when querying VF temperature")
Signed-off-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c |   19 +++++++++++++------
 1 file changed, 13 insertions(+), 6 deletions(-)

--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -8939,18 +8939,16 @@ static ssize_t bnxt_show_temp(struct dev
 	struct hwrm_temp_monitor_query_output *resp;
 	struct bnxt *bp = dev_get_drvdata(dev);
 	u32 len = 0;
+	int rc;
 
 	resp = bp->hwrm_cmd_resp_addr;
 	bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_TEMP_MONITOR_QUERY, -1, -1);
 	mutex_lock(&bp->hwrm_cmd_lock);
-	if (!_hwrm_send_message_silent(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT))
+	rc = _hwrm_send_message(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
+	if (!rc)
 		len = sprintf(buf, "%u\n", resp->temp * 1000); /* display millidegree */
 	mutex_unlock(&bp->hwrm_cmd_lock);
-
-	if (len)
-		return len;
-
-	return sprintf(buf, "unknown\n");
+	return rc ?: len;
 }
 static SENSOR_DEVICE_ATTR(temp1_input, 0444, bnxt_show_temp, NULL, 0);
 
@@ -8970,7 +8968,16 @@ static void bnxt_hwmon_close(struct bnxt
 
 static void bnxt_hwmon_open(struct bnxt *bp)
 {
+	struct hwrm_temp_monitor_query_input req = {0};
 	struct pci_dev *pdev = bp->pdev;
+	int rc;
+
+	bnxt_hwrm_cmd_hdr_init(bp, &req, HWRM_TEMP_MONITOR_QUERY, -1, -1);
+	rc = hwrm_send_message_silent(bp, &req, sizeof(req), HWRM_CMD_TIMEOUT);
+	if (rc == -EACCES || rc == -EOPNOTSUPP) {
+		bnxt_hwmon_close(bp);
+		return;
+	}
 
 	if (bp->hwmon_dev)
 		return;

[PATCH 5.4 33/43] bnxt_en: Protect bnxt_set_eee() and bnxt_set_pauseparam() with mutex.

[Greg Kroah-Hartman]

From: Michael Chan <michael.chan@broadcom.com>

[ Upstream commit a53906908148d64423398a62c4435efb0d09652c ]

All changes related to bp->link_info require the protection of the
link_lock mutex.  It's not sufficient to rely just on RTNL.

Fixes: 163e9ef63641 ("bnxt_en: Fix race when modifying pause settings.")
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c |   31 ++++++++++++++--------
 1 file changed, 20 insertions(+), 11 deletions(-)

--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c
@@ -1665,9 +1665,12 @@ static int bnxt_set_pauseparam(struct ne
 	if (!BNXT_SINGLE_PF(bp))
 		return -EOPNOTSUPP;
 
+	mutex_lock(&bp->link_lock);
 	if (epause->autoneg) {
-		if (!(link_info->autoneg & BNXT_AUTONEG_SPEED))
-			return -EINVAL;
+		if (!(link_info->autoneg & BNXT_AUTONEG_SPEED)) {
+			rc = -EINVAL;
+			goto pause_exit;
+		}
 
 		link_info->autoneg |= BNXT_AUTONEG_FLOW_CTRL;
 		if (bp->hwrm_spec_code >= 0x10201)
@@ -1688,11 +1691,11 @@ static int bnxt_set_pauseparam(struct ne
 	if (epause->tx_pause)
 		link_info->req_flow_ctrl |= BNXT_LINK_PAUSE_TX;
 
-	if (netif_running(dev)) {
-		mutex_lock(&bp->link_lock);
+	if (netif_running(dev))
 		rc = bnxt_hwrm_set_pause(bp);
-		mutex_unlock(&bp->link_lock);
-	}
+
+pause_exit:
+	mutex_unlock(&bp->link_lock);
 	return rc;
 }
 
@@ -2397,8 +2400,7 @@ static int bnxt_set_eee(struct net_devic
 	struct bnxt *bp = netdev_priv(dev);
 	struct ethtool_eee *eee = &bp->eee;
 	struct bnxt_link_info *link_info = &bp->link_info;
-	u32 advertising =
-		 _bnxt_fw_to_ethtool_adv_spds(link_info->advertising, 0);
+	u32 advertising;
 	int rc = 0;
 
 	if (!BNXT_SINGLE_PF(bp))
@@ -2407,19 +2409,23 @@ static int bnxt_set_eee(struct net_devic
 	if (!(bp->flags & BNXT_FLAG_EEE_CAP))
 		return -EOPNOTSUPP;
 
+	mutex_lock(&bp->link_lock);
+	advertising = _bnxt_fw_to_ethtool_adv_spds(link_info->advertising, 0);
 	if (!edata->eee_enabled)
 		goto eee_ok;
 
 	if (!(link_info->autoneg & BNXT_AUTONEG_SPEED)) {
 		netdev_warn(dev, "EEE requires autoneg\n");
-		return -EINVAL;
+		rc = -EINVAL;
+		goto eee_exit;
 	}
 	if (edata->tx_lpi_enabled) {
 		if (bp->lpi_tmr_hi && (edata->tx_lpi_timer > bp->lpi_tmr_hi ||
 				       edata->tx_lpi_timer < bp->lpi_tmr_lo)) {
 			netdev_warn(dev, "Valid LPI timer range is %d and %d microsecs\n",
 				    bp->lpi_tmr_lo, bp->lpi_tmr_hi);
-			return -EINVAL;
+			rc = -EINVAL;
+			goto eee_exit;
 		} else if (!bp->lpi_tmr_hi) {
 			edata->tx_lpi_timer = eee->tx_lpi_timer;
 		}
@@ -2429,7 +2435,8 @@ static int bnxt_set_eee(struct net_devic
 	} else if (edata->advertised & ~advertising) {
 		netdev_warn(dev, "EEE advertised %x must be a subset of autoneg advertised speeds %x\n",
 			    edata->advertised, advertising);
-		return -EINVAL;
+		rc = -EINVAL;
+		goto eee_exit;
 	}
 
 	eee->advertised = edata->advertised;
@@ -2441,6 +2448,8 @@ eee_ok:
 	if (netif_running(dev))
 		rc = bnxt_hwrm_set_link_setting(bp, false, true);
 
+eee_exit:
+	mutex_unlock(&bp->link_lock);
 	return rc;
 }
 

[PATCH 5.4 34/43] net: lantiq: Wake TX queue again

[Greg Kroah-Hartman]

From: Hauke Mehrtens <hauke@hauke-m.de>

[ Upstream commit dea36631e6f186d4b853af67a4aef2e35cfa8bb7 ]

The call to netif_wake_queue() when the TX descriptors were freed was
missing. When there are no TX buffers available the TX queue will be
stopped, but it was not started again when they are available again,
this is fixed in this patch.

Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/lantiq_xrx200.c |    3 +++
 1 file changed, 3 insertions(+)

--- a/drivers/net/ethernet/lantiq_xrx200.c
+++ b/drivers/net/ethernet/lantiq_xrx200.c
@@ -268,6 +268,9 @@ static int xrx200_tx_housekeeping(struct
 	net_dev->stats.tx_bytes += bytes;
 	netdev_completed_queue(ch->priv->net_dev, pkts, bytes);
 
+	if (netif_queue_stopped(net_dev))
+		netif_wake_queue(net_dev);
+
 	if (pkts < budget) {
 		napi_complete(&ch->napi);
 		ltq_dma_enable_irq(&ch->dma);

[PATCH 5.4 35/43] net: lantiq: use netif_tx_napi_add() for TX NAPI

[Greg Kroah-Hartman]

From: Hauke Mehrtens <hauke@hauke-m.de>

[ Upstream commit 74c7b80e222b58d3cea731d31e2a31a77fea8345 ]

netif_tx_napi_add() should be used for NAPI in the TX direction instead
of the netif_napi_add() function.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/lantiq_xrx200.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/lantiq_xrx200.c
+++ b/drivers/net/ethernet/lantiq_xrx200.c
@@ -501,7 +501,7 @@ static int xrx200_probe(struct platform_
 
 	/* setup NAPI */
 	netif_napi_add(net_dev, &priv->chan_rx.napi, xrx200_poll_rx, 32);
-	netif_napi_add(net_dev, &priv->chan_tx.napi, xrx200_tx_housekeeping, 32);
+	netif_tx_napi_add(net_dev, &priv->chan_tx.napi, xrx200_tx_housekeeping, 32);
 
 	platform_set_drvdata(pdev, priv);
 

[PATCH 5.4 36/43] net: lantiq: Use napi_complete_done()

[Greg Kroah-Hartman]

From: Hauke Mehrtens <hauke@hauke-m.de>

[ Upstream commit c582a7fea9dad4d309437d1a7e22e6d2cb380e2e ]

Use napi_complete_done() and activate the interrupts when this function
returns true. This way the generic NAPI code can take care of activating
the interrupts.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/lantiq_xrx200.c |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/net/ethernet/lantiq_xrx200.c
+++ b/drivers/net/ethernet/lantiq_xrx200.c
@@ -230,8 +230,8 @@ static int xrx200_poll_rx(struct napi_st
 	}
 
 	if (rx < budget) {
-		napi_complete(&ch->napi);
-		ltq_dma_enable_irq(&ch->dma);
+		if (napi_complete_done(&ch->napi, rx))
+			ltq_dma_enable_irq(&ch->dma);
 	}
 
 	return rx;
@@ -272,8 +272,8 @@ static int xrx200_tx_housekeeping(struct
 		netif_wake_queue(net_dev);
 
 	if (pkts < budget) {
-		napi_complete(&ch->napi);
-		ltq_dma_enable_irq(&ch->dma);
+		if (napi_complete_done(&ch->napi, pkts))
+			ltq_dma_enable_irq(&ch->dma);
 	}
 
 	return pkts;

[PATCH 5.4 37/43] net: lantiq: Disable IRQs only if NAPI gets scheduled

[Greg Kroah-Hartman]

From: Hauke Mehrtens <hauke@hauke-m.de>

[ Upstream commit 9423361da52356cb68642db5b2729b6b85aad330 ]

The napi_schedule() call will only schedule the NAPI if it is not
already running. To make sure that we do not deactivate interrupts
without scheduling NAPI only deactivate the interrupts in case NAPI also
gets scheduled.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/ethernet/lantiq_xrx200.c |    8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/drivers/net/ethernet/lantiq_xrx200.c
+++ b/drivers/net/ethernet/lantiq_xrx200.c
@@ -344,10 +344,12 @@ static irqreturn_t xrx200_dma_irq(int ir
 {
 	struct xrx200_chan *ch = ptr;
 
-	ltq_dma_disable_irq(&ch->dma);
-	ltq_dma_ack_irq(&ch->dma);
+	if (napi_schedule_prep(&ch->napi)) {
+		__napi_schedule(&ch->napi);
+		ltq_dma_disable_irq(&ch->dma);
+	}
 
-	napi_schedule(&ch->napi);
+	ltq_dma_ack_irq(&ch->dma);
 
 	return IRQ_HANDLED;
 }

[PATCH 5.4 38/43] net: phy: Avoid NPD upon phy_detach() when driver is unbound

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit c2b727df7caa33876e7066bde090f40001b6d643 ]

If we have unbound the PHY driver prior to calling phy_detach() (often
via phy_disconnect()) then we can cause a NULL pointer de-reference
accessing the driver owner member. The steps to reproduce are:

echo unimac-mdio-0:01 > /sys/class/net/eth0/phydev/driver/unbind
ip link set eth0 down

Fixes: cafe8df8b9bc ("net: phy: Fix lack of reference count on PHY driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/phy_device.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1421,7 +1421,8 @@ void phy_detach(struct phy_device *phyde
 
 	phy_led_triggers_unregister(phydev);
 
-	module_put(phydev->mdio.dev.driver->owner);
+	if (phydev->mdio.dev.driver)
+		module_put(phydev->mdio.dev.driver->owner);
 
 	/* If the device had no specific driver before (i.e. - it
 	 * was using the generic driver), we unbind the device

[PATCH 5.4 39/43] net: phy: Do not warn in phy_stop() on PHY_DOWN

[Greg Kroah-Hartman]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 5116a8ade333b6c2e180782139c9c516a437b21c ]

When phy_is_started() was added to catch incorrect PHY states,
phy_stop() would not be qualified against PHY_DOWN. It is possible to
reach that state when the PHY driver has been unbound and the network
device is then brought down.

Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/net/phy/phy.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -834,7 +834,7 @@ EXPORT_SYMBOL(phy_free_interrupt);
  */
 void phy_stop(struct phy_device *phydev)
 {
-	if (!phy_is_started(phydev)) {
+	if (!phy_is_started(phydev) && phydev->state != PHY_DOWN) {
 		WARN(1, "called from state %s\n",
 		     phy_state_to_str(phydev->state));
 		return;

[PATCH 5.4 40/43] net: qrtr: check skb_put_padto() return value

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 3ca1a42a52ca4b4f02061683851692ad65fefac8 ]

If skb_put_padto() returns an error, skb has been freed.
Better not touch it anymore, as reported by syzbot [1]

Note to qrtr maintainers : this suggests qrtr_sendmsg()
should adjust sock_alloc_send_skb() second parameter
to account for the potential added alignment to avoid
reallocation.

[1]

BUG: KASAN: use-after-free in __skb_insert include/linux/skbuff.h:1907 [inline]
BUG: KASAN: use-after-free in __skb_queue_before include/linux/skbuff.h:2016 [inline]
BUG: KASAN: use-after-free in __skb_queue_tail include/linux/skbuff.h:2049 [inline]
BUG: KASAN: use-after-free in skb_queue_tail+0x6b/0x120 net/core/skbuff.c:3146
Write of size 8 at addr ffff88804d8ab3c0 by task syz-executor.4/4316

CPU: 1 PID: 4316 Comm: syz-executor.4 Not tainted 5.9.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1d6/0x29e lib/dump_stack.c:118
 print_address_description+0x66/0x620 mm/kasan/report.c:383
 __kasan_report mm/kasan/report.c:513 [inline]
 kasan_report+0x132/0x1d0 mm/kasan/report.c:530
 __skb_insert include/linux/skbuff.h:1907 [inline]
 __skb_queue_before include/linux/skbuff.h:2016 [inline]
 __skb_queue_tail include/linux/skbuff.h:2049 [inline]
 skb_queue_tail+0x6b/0x120 net/core/skbuff.c:3146
 qrtr_tun_send+0x1a/0x40 net/qrtr/tun.c:23
 qrtr_node_enqueue+0x44f/0xc00 net/qrtr/qrtr.c:364
 qrtr_bcast_enqueue+0xbe/0x140 net/qrtr/qrtr.c:861
 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960
 sock_sendmsg_nosec net/socket.c:651 [inline]
 sock_sendmsg net/socket.c:671 [inline]
 sock_write_iter+0x317/0x470 net/socket.c:998
 call_write_iter include/linux/fs.h:1882 [inline]
 new_sync_write fs/read_write.c:503 [inline]
 vfs_write+0xa96/0xd10 fs/read_write.c:578
 ksys_write+0x11b/0x220 fs/read_write.c:631
 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x45d5b9
Code: 5d b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 2b b4 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f84b5b81c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000038b40 RCX: 000000000045d5b9
RDX: 0000000000000055 RSI: 0000000020001240 RDI: 0000000000000003
RBP: 00007f84b5b81ca0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000f
R13: 00007ffcbbf86daf R14: 00007f84b5b829c0 R15: 000000000118cf4c

Allocated by task 4316:
 kasan_save_stack mm/kasan/common.c:48 [inline]
 kasan_set_track mm/kasan/common.c:56 [inline]
 __kasan_kmalloc+0x100/0x130 mm/kasan/common.c:461
 slab_post_alloc_hook+0x3e/0x290 mm/slab.h:518
 slab_alloc mm/slab.c:3312 [inline]
 kmem_cache_alloc+0x1c1/0x2d0 mm/slab.c:3482
 skb_clone+0x1b2/0x370 net/core/skbuff.c:1449
 qrtr_bcast_enqueue+0x6d/0x140 net/qrtr/qrtr.c:857
 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960
 sock_sendmsg_nosec net/socket.c:651 [inline]
 sock_sendmsg net/socket.c:671 [inline]
 sock_write_iter+0x317/0x470 net/socket.c:998
 call_write_iter include/linux/fs.h:1882 [inline]
 new_sync_write fs/read_write.c:503 [inline]
 vfs_write+0xa96/0xd10 fs/read_write.c:578
 ksys_write+0x11b/0x220 fs/read_write.c:631
 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Freed by task 4316:
 kasan_save_stack mm/kasan/common.c:48 [inline]
 kasan_set_track+0x3d/0x70 mm/kasan/common.c:56
 kasan_set_free_info+0x17/0x30 mm/kasan/generic.c:355
 __kasan_slab_free+0xdd/0x110 mm/kasan/common.c:422
 __cache_free mm/slab.c:3418 [inline]
 kmem_cache_free+0x82/0xf0 mm/slab.c:3693
 __skb_pad+0x3f5/0x5a0 net/core/skbuff.c:1823
 __skb_put_padto include/linux/skbuff.h:3233 [inline]
 skb_put_padto include/linux/skbuff.h:3252 [inline]
 qrtr_node_enqueue+0x62f/0xc00 net/qrtr/qrtr.c:360
 qrtr_bcast_enqueue+0xbe/0x140 net/qrtr/qrtr.c:861
 qrtr_sendmsg+0x680/0x9c0 net/qrtr/qrtr.c:960
 sock_sendmsg_nosec net/socket.c:651 [inline]
 sock_sendmsg net/socket.c:671 [inline]
 sock_write_iter+0x317/0x470 net/socket.c:998
 call_write_iter include/linux/fs.h:1882 [inline]
 new_sync_write fs/read_write.c:503 [inline]
 vfs_write+0xa96/0xd10 fs/read_write.c:578
 ksys_write+0x11b/0x220 fs/read_write.c:631
 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

The buggy address belongs to the object at ffff88804d8ab3c0
 which belongs to the cache skbuff_head_cache of size 224
The buggy address is located 0 bytes inside of
 224-byte region [ffff88804d8ab3c0, ffff88804d8ab4a0)
The buggy address belongs to the page:
page:00000000ea8cccfb refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88804d8abb40 pfn:0x4d8ab
flags: 0xfffe0000000200(slab)
raw: 00fffe0000000200 ffffea0002237ec8 ffffea00029b3388 ffff88821bb66800
raw: ffff88804d8abb40 ffff88804d8ab000 000000010000000b 0000000000000000
page dumped because: kasan: bad access detected

Fixes: ce57785bf91b ("net: qrtr: fix len of skb_put_padto in qrtr_node_enqueue")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Carl Huang <cjhuang@codeaurora.org>
Cc: Wen Gong <wgong@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 net/qrtr/qrtr.c |   20 +++++++++++---------
 1 file changed, 11 insertions(+), 9 deletions(-)

--- a/net/qrtr/qrtr.c
+++ b/net/qrtr/qrtr.c
@@ -178,7 +178,7 @@ static int qrtr_node_enqueue(struct qrtr
 {
 	struct qrtr_hdr_v1 *hdr;
 	size_t len = skb->len;
-	int rc = -ENODEV;
+	int rc;
 
 	hdr = skb_push(skb, sizeof(*hdr));
 	hdr->version = cpu_to_le32(QRTR_PROTO_VER_1);
@@ -196,15 +196,17 @@ static int qrtr_node_enqueue(struct qrtr
 	hdr->size = cpu_to_le32(len);
 	hdr->confirm_rx = 0;
 
-	skb_put_padto(skb, ALIGN(len, 4) + sizeof(*hdr));
-
-	mutex_lock(&node->ep_lock);
-	if (node->ep)
-		rc = node->ep->xmit(node->ep, skb);
-	else
-		kfree_skb(skb);
-	mutex_unlock(&node->ep_lock);
+	rc = skb_put_padto(skb, ALIGN(len, 4) + sizeof(*hdr));
 
+	if (!rc) {
+		mutex_lock(&node->ep_lock);
+		rc = -ENODEV;
+		if (node->ep)
+			rc = node->ep->xmit(node->ep, skb);
+		else
+			kfree_skb(skb);
+		mutex_unlock(&node->ep_lock);
+	}
 	return rc;
 }
 

[PATCH 5.4 41/43] net: add __must_check to skb_put_padto()

[Greg Kroah-Hartman]

From: Eric Dumazet <edumazet@google.com>

[ Upstream commit 4a009cb04aeca0de60b73f37b102573354214b52 ]

skb_put_padto() and __skb_put_padto() callers
must check return values or risk use-after-free.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 include/linux/skbuff.h |    7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -3185,8 +3185,9 @@ static inline int skb_padto(struct sk_bu
  *	is untouched. Otherwise it is extended. Returns zero on
  *	success. The skb is freed on error if @free_on_error is true.
  */
-static inline int __skb_put_padto(struct sk_buff *skb, unsigned int len,
-				  bool free_on_error)
+static inline int __must_check __skb_put_padto(struct sk_buff *skb,
+					       unsigned int len,
+					       bool free_on_error)
 {
 	unsigned int size = skb->len;
 
@@ -3209,7 +3210,7 @@ static inline int __skb_put_padto(struct
  *	is untouched. Otherwise it is extended. Returns zero on
  *	success. The skb is freed on error.
  */
-static inline int skb_put_padto(struct sk_buff *skb, unsigned int len)
+static inline int __must_check skb_put_padto(struct sk_buff *skb, unsigned int len)
 {
 	return __skb_put_padto(skb, len, true);
 }

[PATCH 5.4 42/43] mm: memcg: fix memcg reclaim soft lockup

[Greg Kroah-Hartman]

From: Xunlei Pang <xlpang@linux.alibaba.com>

commit e3336cab2579012b1e72b5265adf98e2d6e244ad upstream.

We've met softlockup with "CONFIG_PREEMPT_NONE=y", when the target memcg
doesn't have any reclaimable memory.

It can be easily reproduced as below:

  watchdog: BUG: soft lockup - CPU#0 stuck for 111s![memcg_test:2204]
  CPU: 0 PID: 2204 Comm: memcg_test Not tainted 5.9.0-rc2+ #12
  Call Trace:
    shrink_lruvec+0x49f/0x640
    shrink_node+0x2a6/0x6f0
    do_try_to_free_pages+0xe9/0x3e0
    try_to_free_mem_cgroup_pages+0xef/0x1f0
    try_charge+0x2c1/0x750
    mem_cgroup_charge+0xd7/0x240
    __add_to_page_cache_locked+0x2fd/0x370
    add_to_page_cache_lru+0x4a/0xc0
    pagecache_get_page+0x10b/0x2f0
    filemap_fault+0x661/0xad0
    ext4_filemap_fault+0x2c/0x40
    __do_fault+0x4d/0xf9
    handle_mm_fault+0x1080/0x1790

It only happens on our 1-vcpu instances, because there's no chance for
oom reaper to run to reclaim the to-be-killed process.

Add a cond_resched() at the upper shrink_node_memcgs() to solve this
issue, this will mean that we will get a scheduling point for each memcg
in the reclaimed hierarchy without any dependency on the reclaimable
memory in that memcg thus making it more predictable.

Suggested-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Xunlei Pang <xlpang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: http://lkml.kernel.org/r/1598495549-67324-1-git-send-email-xlpang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Julius Hemanth Pitti <jpitti@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 mm/vmscan.c |    8 ++++++++
 1 file changed, 8 insertions(+)

--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2775,6 +2775,14 @@ static bool shrink_node(pg_data_t *pgdat
 			unsigned long reclaimed;
 			unsigned long scanned;
 
+			/*
+			 * This loop can become CPU-bound when target memcgs
+			 * aren't eligible for reclaim - either because they
+			 * don't have any reclaimable pages, or because their
+			 * memory is explicitly protected. Avoid soft lockups.
+			 */
+			cond_resched();
+
 			switch (mem_cgroup_protected(root, memcg)) {
 			case MEMCG_PROT_MIN:
 				/*

[PATCH 5.4 43/43] iommu/amd: Use cmpxchg_double() when updating 128-bit IRTE

[Greg Kroah-Hartman]

From: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>

commit e52d58d54a321d4fe9d0ecdabe4f8774449f0d6e upstream.

When using 128-bit interrupt-remapping table entry (IRTE) (a.k.a GA mode),
current driver disables interrupt remapping when it updates the IRTE
so that the upper and lower 64-bit values can be updated safely.

However, this creates a small window, where the interrupt could
arrive and result in IO_PAGE_FAULT (for interrupt) as shown below.

  IOMMU Driver            Device IRQ
  ============            ===========
  irte.RemapEn=0
       ...
   change IRTE            IRQ from device ==> IO_PAGE_FAULT !!
       ...
  irte.RemapEn=1

This scenario has been observed when changing irq affinity on a system
running I/O-intensive workload, in which the destination APIC ID
in the IRTE is updated.

Instead, use cmpxchg_double() to update the 128-bit IRTE at once without
disabling the interrupt remapping. However, this means several features,
which require GA (128-bit IRTE) support will also be affected if cmpxchg16b
is not supported (which is unprecedented for AMD processors w/ IOMMU).

Fixes: 880ac60e2538 ("iommu/amd: Introduce interrupt remapping ops structure")
Reported-by: Sean Osborne <sean.m.osborne@oracle.com>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Tested-by: Erik Rockstrom <erik.rockstrom@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Link: https://lore.kernel.org/r/20200903093822.52012-3-suravee.suthikulpanit@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/iommu/Kconfig          |    2 +-
 drivers/iommu/amd_iommu.c      |   17 +++++++++++++----
 drivers/iommu/amd_iommu_init.c |   21 +++++++++++++++++++--
 3 files changed, 33 insertions(+), 7 deletions(-)

--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -138,7 +138,7 @@ config AMD_IOMMU
 	select PCI_PASID
 	select IOMMU_API
 	select IOMMU_IOVA
-	depends on X86_64 && PCI && ACPI
+	depends on X86_64 && PCI && ACPI && HAVE_CMPXCHG_DOUBLE
 	---help---
 	  With this option you can enable support for AMD IOMMU hardware in
 	  your system. An IOMMU is a hardware component which provides
--- a/drivers/iommu/amd_iommu.c
+++ b/drivers/iommu/amd_iommu.c
@@ -3873,6 +3873,7 @@ out:
 static int modify_irte_ga(u16 devid, int index, struct irte_ga *irte,
 			  struct amd_ir_data *data)
 {
+	bool ret;
 	struct irq_remap_table *table;
 	struct amd_iommu *iommu;
 	unsigned long flags;
@@ -3890,10 +3891,18 @@ static int modify_irte_ga(u16 devid, int
 
 	entry = (struct irte_ga *)table->table;
 	entry = &entry[index];
-	entry->lo.fields_remap.valid = 0;
-	entry->hi.val = irte->hi.val;
-	entry->lo.val = irte->lo.val;
-	entry->lo.fields_remap.valid = 1;
+
+	ret = cmpxchg_double(&entry->lo.val, &entry->hi.val,
+			     entry->lo.val, entry->hi.val,
+			     irte->lo.val, irte->hi.val);
+	/*
+	 * We use cmpxchg16 to atomically update the 128-bit IRTE,
+	 * and it cannot be updated by the hardware or other processors
+	 * behind us, so the return value of cmpxchg16 should be the
+	 * same as the old value.
+	 */
+	WARN_ON(!ret);
+
 	if (data)
 		data->ref = entry;
 
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -1522,7 +1522,14 @@ static int __init init_iommu_one(struct
 			iommu->mmio_phys_end = MMIO_REG_END_OFFSET;
 		else
 			iommu->mmio_phys_end = MMIO_CNTR_CONF_OFFSET;
-		if (((h->efr_attr & (0x1 << IOMMU_FEAT_GASUP_SHIFT)) == 0))
+
+		/*
+		 * Note: GA (128-bit IRTE) mode requires cmpxchg16b supports.
+		 * GAM also requires GA mode. Therefore, we need to
+		 * check cmpxchg16b support before enabling it.
+		 */
+		if (!boot_cpu_has(X86_FEATURE_CX16) ||
+		    ((h->efr_attr & (0x1 << IOMMU_FEAT_GASUP_SHIFT)) == 0))
 			amd_iommu_guest_ir = AMD_IOMMU_GUEST_IR_LEGACY;
 		break;
 	case 0x11:
@@ -1531,8 +1538,18 @@ static int __init init_iommu_one(struct
 			iommu->mmio_phys_end = MMIO_REG_END_OFFSET;
 		else
 			iommu->mmio_phys_end = MMIO_CNTR_CONF_OFFSET;
-		if (((h->efr_reg & (0x1 << IOMMU_EFR_GASUP_SHIFT)) == 0))
+
+		/*
+		 * Note: GA (128-bit IRTE) mode requires cmpxchg16b supports.
+		 * XT, GAM also requires GA mode. Therefore, we need to
+		 * check cmpxchg16b support before enabling them.
+		 */
+		if (!boot_cpu_has(X86_FEATURE_CX16) ||
+		    ((h->efr_reg & (0x1 << IOMMU_EFR_GASUP_SHIFT)) == 0)) {
 			amd_iommu_guest_ir = AMD_IOMMU_GUEST_IR_LEGACY;
+			break;
+		}
+
 		/*
 		 * Note: Since iommu_update_intcapxt() leverages
 		 * the IOMMU MMIO access to MSI capability block registers

Re: [PATCH 5.4 00/43] 5.4.68-rc1 review

[Jon Hunter]

On Fri, 25 Sep 2020 14:48:12 +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.68 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 27 Sep 2020 12:47:02 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.68-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h

All tests passing for Tegra ...

Test results for stable-v5.4:
    14 builds:	14 pass, 0 fail
    26 boots:	26 pass, 0 fail
    56 tests:	56 pass, 0 fail

Linux version:	5.4.68-rc1-ga6d2801f4120
Boards tested:	tegra124-jetson-tk1, tegra186-p2771-0000,
                tegra194-p2972-0000, tegra20-ventana,
                tegra210-p2371-2180, tegra210-p3450-0000,
                tegra30-cardhu-a04

Tested-by: Jon Hunter <jonathanh@nvidia.com>

Jon

Re: [PATCH 5.4 00/43] 5.4.68-rc1 review

[Shuah Khan]

On 9/25/20 6:48 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.68 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 27 Sep 2020 12:47:02 +0000.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.68-rc1.gz
> or in the git tree and branch at:
> 	git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

Tested-by: Shuah Khan <skhan@linuxfoundation.org>

thanks,
-- Shuah

Re: [PATCH 5.4 00/43] 5.4.68-rc1 review

[Naresh Kamboju]

On Fri, 25 Sep 2020 at 18:21, Greg Kroah-Hartman
<gregkh@linuxfoundation.org> wrote:
>
> This is the start of the stable review cycle for the 5.4.68 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Sun, 27 Sep 2020 12:47:02 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
>         https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.4.68-rc1.gz
> or in the git tree and branch at:
>         git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.4.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>

Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.

Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>

Summary
------------------------------------------------------------------------

kernel: 5.4.68-rc1
git repo: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
git branch: linux-5.4.y
git commit: a6d2801f4120fe0719556290e85ca7402b7c1fe2
git describe: v5.4.67-44-ga6d2801f4120
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.4.y-sanity/build/v5.4.67-44-ga6d2801f4120


No regressions (compared to build v5.4.67)


No fixes (compared to build v5.4.67)

Ran 33349 total tests in the following environments and test suites.

Environments
--------------
- dragonboard-410c
- hi6220-hikey
- i386
- juno-r2
- juno-r2-compat
- juno-r2-kasan
- nxp-ls2088
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15
- x86
- x86-kasan

Test Suites
-----------
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-syscalls-tests
* libhugetlbfs
* ltp-fs-tests
* ltp-hugetlb-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-securebits-tests
* ltp-tracing-tests
* v4l2-compliance
* ltp-controllers-tests
* ltp-cve-tests
* ltp-open-posix-tests
* ltp-sched-tests
* network-basic-tests

-- 
Linaro LKFT
https://lkft.linaro.org

Re: [PATCH 5.4 00/43] 5.4.68-rc1 review

[Guenter Roeck]

On Fri, Sep 25, 2020 at 02:48:12PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 5.4.68 release.
> There are 43 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Sun, 27 Sep 2020 12:47:02 +0000.
> Anything received after that time might be too late.
> 

Build results:
	total: 157 pass: 157 fail: 0
Qemu test results:
	total: 430 pass: 430 fail: 0

Tested-by: Guenter Roeck <linux@roeck-us.net>

Guenter