From: Roger Quadros <rogerq@ti.com> To: <nm@ti.com> Cc: <t-kristo@ti.com>, <nsekhar@ti.com>, <kishon@ti.com>, <devicetree@vger.kernel.org>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org>, Roger Quadros <rogerq@ti.com> Subject: [PATCH v5 3/6] arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX Date: Wed, 30 Sep 2020 15:20:29 +0300 [thread overview] Message-ID: <20200930122032.23481-4-rogerq@ti.com> (raw) In-Reply-To: <20200930122032.23481-1-rogerq@ti.com> The USB controller can be connected to one of the 2 lanes of SERDES0 using a MUX. Add a MUX controller node for that. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> --- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index 8997276158ca..c638c3d8c0f2 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -31,6 +31,12 @@ mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */ <0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */ }; + + usb_serdes_mux: mux-controller@4000 { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4000 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */ + }; }; gic500: interrupt-controller@1800000 { -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
WARNING: multiple messages have this Message-ID (diff)
From: Roger Quadros <rogerq@ti.com> To: <nm@ti.com> Cc: devicetree@vger.kernel.org, nsekhar@ti.com, linux-kernel@vger.kernel.org, kishon@ti.com, t-kristo@ti.com, linux-arm-kernel@lists.infradead.org, Roger Quadros <rogerq@ti.com> Subject: [PATCH v5 3/6] arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX Date: Wed, 30 Sep 2020 15:20:29 +0300 [thread overview] Message-ID: <20200930122032.23481-4-rogerq@ti.com> (raw) In-Reply-To: <20200930122032.23481-1-rogerq@ti.com> The USB controller can be connected to one of the 2 lanes of SERDES0 using a MUX. Add a MUX controller node for that. Signed-off-by: Roger Quadros <rogerq@ti.com> Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com> --- arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi index 8997276158ca..c638c3d8c0f2 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi @@ -31,6 +31,12 @@ mux-reg-masks = <0x4080 0x3>, <0x4084 0x3>, /* SERDES0 lane0/1 select */ <0x4088 0x3>, <0x408c 0x3>; /* SERDES0 lane2/3 select */ }; + + usb_serdes_mux: mux-controller@4000 { + compatible = "mmio-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x4000 0x8000000>; /* USB0 to SERDES0 lane 1/3 mux */ + }; }; gic500: interrupt-controller@1800000 { -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-09-30 12:20 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-09-30 12:20 [PATCH v5 0/6] arm64: dts: ti: Add USB support for J7200 EVM Roger Quadros 2020-09-30 12:20 ` Roger Quadros 2020-09-30 12:20 ` [PATCH v5 1/6] dt-bindings: ti-serdes-mux: Add defines for J7200 SoC Roger Quadros 2020-09-30 12:20 ` Roger Quadros 2020-09-30 12:20 ` [PATCH v5 2/6] arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux Roger Quadros 2020-09-30 12:20 ` Roger Quadros 2020-09-30 12:20 ` Roger Quadros [this message] 2020-09-30 12:20 ` [PATCH v5 3/6] arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX Roger Quadros 2020-09-30 12:20 ` [PATCH v5 4/6] arm64: dts: ti: k3-j7200-main: Add USB controller Roger Quadros 2020-09-30 12:20 ` Roger Quadros 2020-09-30 12:20 ` [PATCH v5 5/6] arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function Roger Quadros 2020-09-30 12:20 ` Roger Quadros 2020-09-30 12:20 ` [PATCH v5 6/6] arm64: dts: ti: k3-j7200-common-proc-board: Add USB support Roger Quadros 2020-09-30 12:20 ` Roger Quadros 2020-09-30 13:18 ` [PATCH v5 0/6] arm64: dts: ti: Add USB support for J7200 EVM Nishanth Menon 2020-09-30 13:18 ` Nishanth Menon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20200930122032.23481-4-rogerq@ti.com \ --to=rogerq@ti.com \ --cc=devicetree@vger.kernel.org \ --cc=kishon@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nm@ti.com \ --cc=nsekhar@ti.com \ --cc=t-kristo@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.