All of lore.kernel.org
 help / color / mirror / Atom feed
From: Samuel Holland <samuel@sholland.org>
To: Mark Brown <broonie@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: Ondrej Jirman <megous@megous.com>,
	alsa-devel@alsa-project.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Samuel Holland <samuel@sholland.org>
Subject: [PATCH 14/25] ASoC: sun8i-codec: Correct the BCLK divisor calculation
Date: Wed, 30 Sep 2020 21:11:37 -0500	[thread overview]
Message-ID: <20201001021148.15852-15-samuel@sholland.org> (raw)
In-Reply-To: <20201001021148.15852-1-samuel@sholland.org>

Previously, the BCLK divisor calculation assumed a power-of-two slot
width and exactly two slots. In order to support the TDM slot binding
and 20/24-bit word sizes, those assumptions must be removed.

Due to hardware limitations, the BCLK/LRCK ratio is not as simple as
"slot_width * slots". However, the correct value is already calculated
elsewhere in this function, since it must also be programmed into the
hardware. Reuse that value to calculate the correct SYSCLK/BCLK divisor.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---
 sound/soc/sunxi/sun8i-codec.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/sound/soc/sunxi/sun8i-codec.c b/sound/soc/sunxi/sun8i-codec.c
index 779853d023fe..78feed37aa42 100644
--- a/sound/soc/sunxi/sun8i-codec.c
+++ b/sound/soc/sunxi/sun8i-codec.c
@@ -279,21 +279,21 @@ static const struct sun8i_codec_clk_div sun8i_codec_bclk_div[] = {
 	{ .div = 48,	.val = 9 },
 	{ .div = 64,	.val = 10 },
 	{ .div = 96,	.val = 11 },
 	{ .div = 128,	.val = 12 },
 	{ .div = 192,	.val = 13 },
 };
 
 static u8 sun8i_codec_get_bclk_div(struct sun8i_codec *scodec,
-				   unsigned int rate,
-				   unsigned int word_size)
+				   unsigned int lrck_div_order,
+				   unsigned int sample_rate)
 {
 	unsigned long clk_rate = clk_get_rate(scodec->clk_module);
-	unsigned int div = clk_rate / rate / word_size / 2;
+	unsigned int div = clk_rate / sample_rate >> lrck_div_order;
 	unsigned int best_val = 0, best_diff = ~0;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(sun8i_codec_bclk_div); i++) {
 		const struct sun8i_codec_clk_div *bdiv = &sun8i_codec_bclk_div[i];
 		unsigned int diff = abs(bdiv->div - div);
 
 		if (diff < best_diff) {
@@ -343,30 +343,31 @@ static int sun8i_codec_hw_params(struct snd_pcm_substream *substream,
 	default:
 		return -EINVAL;
 	}
 
 	regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
 			   SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ_MASK,
 			   word_size << SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ);
 
-	bclk_div = sun8i_codec_get_bclk_div(scodec, params_rate(params), 16);
-	regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
-			   SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV_MASK,
-			   bclk_div << SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV);
-
 	/* LRCK divider (BCLK/LRCK ratio) */
 	lrck_div_order = sun8i_codec_get_lrck_div_order(slots, slot_width);
 	if (lrck_div_order < 0)
 		return lrck_div_order;
 
 	regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
 			   SUN8I_AIF1CLK_CTRL_AIF1_LRCK_DIV_MASK,
 			   (lrck_div_order - 4) << SUN8I_AIF1CLK_CTRL_AIF1_LRCK_DIV);
 
+	/* BCLK divider (SYSCLK/BCLK ratio) */
+	bclk_div = sun8i_codec_get_bclk_div(scodec, lrck_div_order, params_rate(params));
+	regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
+			   SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV_MASK,
+			   bclk_div << SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV);
+
 	sample_rate = sun8i_codec_get_hw_rate(params);
 	if (sample_rate < 0)
 		return sample_rate;
 
 	regmap_update_bits(scodec->regmap, SUN8I_SYS_SR_CTRL,
 			   SUN8I_SYS_SR_CTRL_AIF1_FS_MASK,
 			   sample_rate << SUN8I_SYS_SR_CTRL_AIF1_FS);
 
-- 
2.26.2


WARNING: multiple messages have this Message-ID (diff)
From: Samuel Holland <samuel@sholland.org>
To: Mark Brown <broonie@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: Ondrej Jirman <megous@megous.com>,
	alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Samuel Holland <samuel@sholland.org>
Subject: [PATCH 14/25] ASoC: sun8i-codec: Correct the BCLK divisor calculation
Date: Wed, 30 Sep 2020 21:11:37 -0500	[thread overview]
Message-ID: <20201001021148.15852-15-samuel@sholland.org> (raw)
In-Reply-To: <20201001021148.15852-1-samuel@sholland.org>

Previously, the BCLK divisor calculation assumed a power-of-two slot
width and exactly two slots. In order to support the TDM slot binding
and 20/24-bit word sizes, those assumptions must be removed.

Due to hardware limitations, the BCLK/LRCK ratio is not as simple as
"slot_width * slots". However, the correct value is already calculated
elsewhere in this function, since it must also be programmed into the
hardware. Reuse that value to calculate the correct SYSCLK/BCLK divisor.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---
 sound/soc/sunxi/sun8i-codec.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/sound/soc/sunxi/sun8i-codec.c b/sound/soc/sunxi/sun8i-codec.c
index 779853d023fe..78feed37aa42 100644
--- a/sound/soc/sunxi/sun8i-codec.c
+++ b/sound/soc/sunxi/sun8i-codec.c
@@ -279,21 +279,21 @@ static const struct sun8i_codec_clk_div sun8i_codec_bclk_div[] = {
 	{ .div = 48,	.val = 9 },
 	{ .div = 64,	.val = 10 },
 	{ .div = 96,	.val = 11 },
 	{ .div = 128,	.val = 12 },
 	{ .div = 192,	.val = 13 },
 };
 
 static u8 sun8i_codec_get_bclk_div(struct sun8i_codec *scodec,
-				   unsigned int rate,
-				   unsigned int word_size)
+				   unsigned int lrck_div_order,
+				   unsigned int sample_rate)
 {
 	unsigned long clk_rate = clk_get_rate(scodec->clk_module);
-	unsigned int div = clk_rate / rate / word_size / 2;
+	unsigned int div = clk_rate / sample_rate >> lrck_div_order;
 	unsigned int best_val = 0, best_diff = ~0;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(sun8i_codec_bclk_div); i++) {
 		const struct sun8i_codec_clk_div *bdiv = &sun8i_codec_bclk_div[i];
 		unsigned int diff = abs(bdiv->div - div);
 
 		if (diff < best_diff) {
@@ -343,30 +343,31 @@ static int sun8i_codec_hw_params(struct snd_pcm_substream *substream,
 	default:
 		return -EINVAL;
 	}
 
 	regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
 			   SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ_MASK,
 			   word_size << SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ);
 
-	bclk_div = sun8i_codec_get_bclk_div(scodec, params_rate(params), 16);
-	regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
-			   SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV_MASK,
-			   bclk_div << SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV);
-
 	/* LRCK divider (BCLK/LRCK ratio) */
 	lrck_div_order = sun8i_codec_get_lrck_div_order(slots, slot_width);
 	if (lrck_div_order < 0)
 		return lrck_div_order;
 
 	regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
 			   SUN8I_AIF1CLK_CTRL_AIF1_LRCK_DIV_MASK,
 			   (lrck_div_order - 4) << SUN8I_AIF1CLK_CTRL_AIF1_LRCK_DIV);
 
+	/* BCLK divider (SYSCLK/BCLK ratio) */
+	bclk_div = sun8i_codec_get_bclk_div(scodec, lrck_div_order, params_rate(params));
+	regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
+			   SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV_MASK,
+			   bclk_div << SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV);
+
 	sample_rate = sun8i_codec_get_hw_rate(params);
 	if (sample_rate < 0)
 		return sample_rate;
 
 	regmap_update_bits(scodec->regmap, SUN8I_SYS_SR_CTRL,
 			   SUN8I_SYS_SR_CTRL_AIF1_FS_MASK,
 			   sample_rate << SUN8I_SYS_SR_CTRL_AIF1_FS);
 
-- 
2.26.2


WARNING: multiple messages have this Message-ID (diff)
From: Samuel Holland <samuel@sholland.org>
To: Mark Brown <broonie@kernel.org>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
	Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com>
Cc: Ondrej Jirman <megous@megous.com>,
	alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	Samuel Holland <samuel@sholland.org>
Subject: [PATCH 14/25] ASoC: sun8i-codec: Correct the BCLK divisor calculation
Date: Wed, 30 Sep 2020 21:11:37 -0500	[thread overview]
Message-ID: <20201001021148.15852-15-samuel@sholland.org> (raw)
In-Reply-To: <20201001021148.15852-1-samuel@sholland.org>

Previously, the BCLK divisor calculation assumed a power-of-two slot
width and exactly two slots. In order to support the TDM slot binding
and 20/24-bit word sizes, those assumptions must be removed.

Due to hardware limitations, the BCLK/LRCK ratio is not as simple as
"slot_width * slots". However, the correct value is already calculated
elsewhere in this function, since it must also be programmed into the
hardware. Reuse that value to calculate the correct SYSCLK/BCLK divisor.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---
 sound/soc/sunxi/sun8i-codec.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)

diff --git a/sound/soc/sunxi/sun8i-codec.c b/sound/soc/sunxi/sun8i-codec.c
index 779853d023fe..78feed37aa42 100644
--- a/sound/soc/sunxi/sun8i-codec.c
+++ b/sound/soc/sunxi/sun8i-codec.c
@@ -279,21 +279,21 @@ static const struct sun8i_codec_clk_div sun8i_codec_bclk_div[] = {
 	{ .div = 48,	.val = 9 },
 	{ .div = 64,	.val = 10 },
 	{ .div = 96,	.val = 11 },
 	{ .div = 128,	.val = 12 },
 	{ .div = 192,	.val = 13 },
 };
 
 static u8 sun8i_codec_get_bclk_div(struct sun8i_codec *scodec,
-				   unsigned int rate,
-				   unsigned int word_size)
+				   unsigned int lrck_div_order,
+				   unsigned int sample_rate)
 {
 	unsigned long clk_rate = clk_get_rate(scodec->clk_module);
-	unsigned int div = clk_rate / rate / word_size / 2;
+	unsigned int div = clk_rate / sample_rate >> lrck_div_order;
 	unsigned int best_val = 0, best_diff = ~0;
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(sun8i_codec_bclk_div); i++) {
 		const struct sun8i_codec_clk_div *bdiv = &sun8i_codec_bclk_div[i];
 		unsigned int diff = abs(bdiv->div - div);
 
 		if (diff < best_diff) {
@@ -343,30 +343,31 @@ static int sun8i_codec_hw_params(struct snd_pcm_substream *substream,
 	default:
 		return -EINVAL;
 	}
 
 	regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
 			   SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ_MASK,
 			   word_size << SUN8I_AIF1CLK_CTRL_AIF1_WORD_SIZ);
 
-	bclk_div = sun8i_codec_get_bclk_div(scodec, params_rate(params), 16);
-	regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
-			   SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV_MASK,
-			   bclk_div << SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV);
-
 	/* LRCK divider (BCLK/LRCK ratio) */
 	lrck_div_order = sun8i_codec_get_lrck_div_order(slots, slot_width);
 	if (lrck_div_order < 0)
 		return lrck_div_order;
 
 	regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
 			   SUN8I_AIF1CLK_CTRL_AIF1_LRCK_DIV_MASK,
 			   (lrck_div_order - 4) << SUN8I_AIF1CLK_CTRL_AIF1_LRCK_DIV);
 
+	/* BCLK divider (SYSCLK/BCLK ratio) */
+	bclk_div = sun8i_codec_get_bclk_div(scodec, lrck_div_order, params_rate(params));
+	regmap_update_bits(scodec->regmap, SUN8I_AIF1CLK_CTRL,
+			   SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV_MASK,
+			   bclk_div << SUN8I_AIF1CLK_CTRL_AIF1_BCLK_DIV);
+
 	sample_rate = sun8i_codec_get_hw_rate(params);
 	if (sample_rate < 0)
 		return sample_rate;
 
 	regmap_update_bits(scodec->regmap, SUN8I_SYS_SR_CTRL,
 			   SUN8I_SYS_SR_CTRL_AIF1_FS_MASK,
 			   sample_rate << SUN8I_SYS_SR_CTRL_AIF1_FS);
 
-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2020-10-01  2:18 UTC|newest]

Thread overview: 181+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-01  2:11 [PATCH 00/25] ASoC: sun8i-codec: support for AIF2 and AIF3 Samuel Holland
2020-10-01  2:11 ` Samuel Holland
2020-10-01  2:11 ` Samuel Holland
2020-10-01  2:11 ` [PATCH 01/25] ASoC: sun8i-codec: Set up clock tree at probe time Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05  9:53   ` Maxime Ripard
2020-10-05  9:53     ` Maxime Ripard
2020-10-05  9:53     ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 02/25] ASoC: sun8i-codec: Swap module clock/reset dependencies Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05  9:54   ` Maxime Ripard
2020-10-05  9:54     ` Maxime Ripard
2020-10-05  9:54     ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 03/25] ASoC: sun8i-codec: Sort DAPM controls, widgets, and routes Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05  9:54   ` Maxime Ripard
2020-10-05  9:54     ` Maxime Ripard
2020-10-05  9:54     ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 04/25] ASoC: sun8i-codec: Consistently name DAPM widgets " Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05  9:57   ` Maxime Ripard
2020-10-05  9:57     ` Maxime Ripard
2020-10-05  9:57     ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 05/25] ASoC: sun8i-codec: Correct DAPM widget types Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05  9:57   ` Maxime Ripard
2020-10-05  9:57     ` Maxime Ripard
2020-10-05  9:57     ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 06/25] ASoC: sun8i-codec: Fix AIF widget channel references Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05 10:00   ` Maxime Ripard
2020-10-05 10:00     ` Maxime Ripard
2020-10-05 10:00     ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 07/25] ASoC: sun8i-codec: Enable AIF mono/stereo control Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05 10:00   ` Maxime Ripard
2020-10-05 10:00     ` Maxime Ripard
2020-10-05 10:00     ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 08/25] ASoC: sun8i-codec: Use snd_soc_dai_get_drvdata Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05 10:01   ` Maxime Ripard
2020-10-05 10:01     ` Maxime Ripard
2020-10-05 10:01     ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 09/25] ASoC: sun8i-codec: Prepare to extend the DAI driver Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05 11:24   ` Maxime Ripard
2020-10-05 11:24     ` Maxime Ripard
2020-10-05 11:24     ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 10/25] ASoC: sun8i-codec: Program format before clock inversion Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05 11:26   ` Maxime Ripard
2020-10-05 11:26     ` Maxime Ripard
2020-10-05 11:26     ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 11/25] ASoC: sun8i-codec: Enable all supported clock inversions Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05 11:30   ` Maxime Ripard
2020-10-05 11:30     ` Maxime Ripard
2020-10-05 11:30     ` Maxime Ripard
2020-10-06  4:29     ` Samuel Holland
2020-10-06  4:29       ` Samuel Holland
2020-10-06  4:29       ` Samuel Holland
2020-10-08 12:59       ` Maxime Ripard
2020-10-08 12:59         ` Maxime Ripard
2020-10-08 12:59         ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 12/25] ASoC: sun8i-codec: Program the correct word size Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05 11:30   ` Maxime Ripard
2020-10-05 11:30     ` Maxime Ripard
2020-10-05 11:30     ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 13/25] ASoC: sun8i-codec: Round up the LRCK divisor Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05 11:31   ` Maxime Ripard
2020-10-05 11:31     ` Maxime Ripard
2020-10-05 11:31     ` Maxime Ripard
2020-10-01  2:11 ` Samuel Holland [this message]
2020-10-01  2:11   ` [PATCH 14/25] ASoC: sun8i-codec: Correct the BCLK divisor calculation Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05 11:34   ` Maxime Ripard
2020-10-05 11:34     ` Maxime Ripard
2020-10-05 11:34     ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 15/25] ASoC: sun8i-codec: Support the TDM slot binding Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05 11:34   ` Maxime Ripard
2020-10-05 11:34     ` Maxime Ripard
2020-10-05 11:34     ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 16/25] ASoC: sun8i-codec: Enforce symmetric DAI parameters Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05 11:39   ` Maxime Ripard
2020-10-05 11:39     ` Maxime Ripard
2020-10-05 11:39     ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 17/25] ASoC: sun8i-codec: Enable all supported sample rates Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05 11:39   ` Maxime Ripard
2020-10-05 11:39     ` Maxime Ripard
2020-10-05 11:39     ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 18/25] ASoC: sun8i-codec: Automatically set the system sample rate Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05 11:58   ` Maxime Ripard
2020-10-05 11:58     ` Maxime Ripard
2020-10-05 11:58     ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 19/25] ASoC: sun8i-codec: Constrain to compatible sample rates Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05 11:59   ` Maxime Ripard
2020-10-05 11:59     ` Maxime Ripard
2020-10-05 11:59     ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 20/25] ASoC: sun8i-codec: Protect the clock rate while streams are open Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01 13:27   ` kernel test robot
2020-10-01 13:27     ` kernel test robot
2020-10-01 13:27     ` kernel test robot
2020-10-01 13:27     ` kernel test robot
2020-10-05 12:01   ` Maxime Ripard
2020-10-05 12:01     ` Maxime Ripard
2020-10-05 12:01     ` Maxime Ripard
2020-10-05 13:15     ` Chen-Yu Tsai
2020-10-05 13:15       ` Chen-Yu Tsai
2020-10-05 13:15       ` Chen-Yu Tsai
2020-10-06  4:46       ` Samuel Holland
2020-10-06  4:46         ` Samuel Holland
2020-10-06  4:46         ` Samuel Holland
2020-10-06  4:43     ` Samuel Holland
2020-10-06  4:43       ` Samuel Holland
2020-10-06  4:43       ` Samuel Holland
2020-10-08 13:02       ` Maxime Ripard
2020-10-08 13:02         ` Maxime Ripard
2020-10-08 13:02         ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 21/25] ASoC: sun8i-codec: Require an exact BCLK divisor match Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05 12:01   ` Maxime Ripard
2020-10-05 12:01     ` Maxime Ripard
2020-10-05 12:01     ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 22/25] ASoC: sun8i-codec: Enable all supported PCM formats Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05 12:02   ` Maxime Ripard
2020-10-05 12:02     ` Maxime Ripard
2020-10-05 12:02     ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 23/25] ASoC: sun8i-codec: Generalize AIF clock control Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05 12:04   ` Maxime Ripard
2020-10-05 12:04     ` Maxime Ripard
2020-10-05 12:04     ` Maxime Ripard
2020-10-06  4:51     ` Samuel Holland
2020-10-06  4:51       ` Samuel Holland
2020-10-06  4:51       ` Samuel Holland
2020-10-12 11:17       ` Maxime Ripard
2020-10-12 11:17         ` Maxime Ripard
2020-10-12 11:17         ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 24/25] ASoC: sun8i-codec: Add a DAI, widgets, and routes for AIF2 Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05 12:05   ` Maxime Ripard
2020-10-05 12:05     ` Maxime Ripard
2020-10-05 12:05     ` Maxime Ripard
2020-10-01  2:11 ` [PATCH 25/25] ASoC: sun8i-codec: Add a DAI, widgets, and routes for AIF3 Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-01  2:11   ` Samuel Holland
2020-10-05 17:54 ` [PATCH 00/25] ASoC: sun8i-codec: support for AIF2 and AIF3 Mark Brown
2020-10-05 17:54   ` Mark Brown
2020-10-05 17:54   ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201001021148.15852-15-samuel@sholland.org \
    --to=samuel@sholland.org \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=megous@megous.com \
    --cc=mripard@kernel.org \
    --cc=perex@perex.cz \
    --cc=tiwai@suse.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.