All of lore.kernel.org
 help / color / mirror / Atom feed
From: Pratyush Yadav <p.yadav@ti.com>
To: Tudor Ambarus <tudor.ambarus@microchip.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>
Cc: Pratyush Yadav <p.yadav@ti.com>, Sekhar Nori <nsekhar@ti.com>,
	Boris Brezillon <boris.brezillon@collabora.com>
Subject: [PATCH v15 01/15] mtd: spi-nor: core: use EOPNOTSUPP instead of ENOTSUPP
Date: Fri, 2 Oct 2020 01:50:31 +0530	[thread overview]
Message-ID: <20201001202045.21499-2-p.yadav@ti.com> (raw)
In-Reply-To: <20201001202045.21499-1-p.yadav@ti.com>

ENOTSUPP is not a SUSV4 error code. Using EOPNOTSUPP is preferred
in its stead.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 drivers/mtd/spi-nor/core.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 0369d98b2d12..4d0f8d165544 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2281,7 +2281,7 @@ static int spi_nor_hwcaps_pp2cmd(u32 hwcaps)
  *@nor:        pointer to a 'struct spi_nor'
  *@op:         pointer to op template to be checked
  *
- * Returns 0 if operation is supported, -ENOTSUPP otherwise.
+ * Returns 0 if operation is supported, -EOPNOTSUPP otherwise.
  */
 static int spi_nor_spimem_check_op(struct spi_nor *nor,
 				   struct spi_mem_op *op)
@@ -2295,12 +2295,12 @@ static int spi_nor_spimem_check_op(struct spi_nor *nor,
 	op->addr.nbytes = 4;
 	if (!spi_mem_supports_op(nor->spimem, op)) {
 		if (nor->mtd.size > SZ_16M)
-			return -ENOTSUPP;
+			return -EOPNOTSUPP;
 
 		/* If flash size <= 16MB, 3 address bytes are sufficient */
 		op->addr.nbytes = 3;
 		if (!spi_mem_supports_op(nor->spimem, op))
-			return -ENOTSUPP;
+			return -EOPNOTSUPP;
 	}
 
 	return 0;
@@ -2312,7 +2312,7 @@ static int spi_nor_spimem_check_op(struct spi_nor *nor,
  *@nor:         pointer to a 'struct spi_nor'
  *@read:        pointer to op template to be checked
  *
- * Returns 0 if operation is supported, -ENOTSUPP otherwise.
+ * Returns 0 if operation is supported, -EOPNOTSUPP otherwise.
  */
 static int spi_nor_spimem_check_readop(struct spi_nor *nor,
 				       const struct spi_nor_read_command *read)
@@ -2338,7 +2338,7 @@ static int spi_nor_spimem_check_readop(struct spi_nor *nor,
  *@nor:         pointer to a 'struct spi_nor'
  *@pp:          pointer to op template to be checked
  *
- * Returns 0 if operation is supported, -ENOTSUPP otherwise.
+ * Returns 0 if operation is supported, -EOPNOTSUPP otherwise.
  */
 static int spi_nor_spimem_check_pp(struct spi_nor *nor,
 				   const struct spi_nor_pp_command *pp)
-- 
2.28.0


WARNING: multiple messages have this Message-ID (diff)
From: Pratyush Yadav <p.yadav@ti.com>
To: Tudor Ambarus <tudor.ambarus@microchip.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	Vignesh Raghavendra <vigneshr@ti.com>,
	<linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>
Cc: Boris Brezillon <boris.brezillon@collabora.com>,
	Sekhar Nori <nsekhar@ti.com>, Pratyush Yadav <p.yadav@ti.com>
Subject: [PATCH v15 01/15] mtd: spi-nor: core: use EOPNOTSUPP instead of ENOTSUPP
Date: Fri, 2 Oct 2020 01:50:31 +0530	[thread overview]
Message-ID: <20201001202045.21499-2-p.yadav@ti.com> (raw)
In-Reply-To: <20201001202045.21499-1-p.yadav@ti.com>

ENOTSUPP is not a SUSV4 error code. Using EOPNOTSUPP is preferred
in its stead.

Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
 drivers/mtd/spi-nor/core.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index 0369d98b2d12..4d0f8d165544 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -2281,7 +2281,7 @@ static int spi_nor_hwcaps_pp2cmd(u32 hwcaps)
  *@nor:        pointer to a 'struct spi_nor'
  *@op:         pointer to op template to be checked
  *
- * Returns 0 if operation is supported, -ENOTSUPP otherwise.
+ * Returns 0 if operation is supported, -EOPNOTSUPP otherwise.
  */
 static int spi_nor_spimem_check_op(struct spi_nor *nor,
 				   struct spi_mem_op *op)
@@ -2295,12 +2295,12 @@ static int spi_nor_spimem_check_op(struct spi_nor *nor,
 	op->addr.nbytes = 4;
 	if (!spi_mem_supports_op(nor->spimem, op)) {
 		if (nor->mtd.size > SZ_16M)
-			return -ENOTSUPP;
+			return -EOPNOTSUPP;
 
 		/* If flash size <= 16MB, 3 address bytes are sufficient */
 		op->addr.nbytes = 3;
 		if (!spi_mem_supports_op(nor->spimem, op))
-			return -ENOTSUPP;
+			return -EOPNOTSUPP;
 	}
 
 	return 0;
@@ -2312,7 +2312,7 @@ static int spi_nor_spimem_check_op(struct spi_nor *nor,
  *@nor:         pointer to a 'struct spi_nor'
  *@read:        pointer to op template to be checked
  *
- * Returns 0 if operation is supported, -ENOTSUPP otherwise.
+ * Returns 0 if operation is supported, -EOPNOTSUPP otherwise.
  */
 static int spi_nor_spimem_check_readop(struct spi_nor *nor,
 				       const struct spi_nor_read_command *read)
@@ -2338,7 +2338,7 @@ static int spi_nor_spimem_check_readop(struct spi_nor *nor,
  *@nor:         pointer to a 'struct spi_nor'
  *@pp:          pointer to op template to be checked
  *
- * Returns 0 if operation is supported, -ENOTSUPP otherwise.
+ * Returns 0 if operation is supported, -EOPNOTSUPP otherwise.
  */
 static int spi_nor_spimem_check_pp(struct spi_nor *nor,
 				   const struct spi_nor_pp_command *pp)
-- 
2.28.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/

  reply	other threads:[~2020-10-01 20:21 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-01 20:20 [PATCH v15 00/15] mtd: spi-nor: add xSPI Octal DTR support Pratyush Yadav
2020-10-01 20:20 ` Pratyush Yadav
2020-10-01 20:20 ` Pratyush Yadav [this message]
2020-10-01 20:20   ` [PATCH v15 01/15] mtd: spi-nor: core: use EOPNOTSUPP instead of ENOTSUPP Pratyush Yadav
2020-10-01 20:20 ` [PATCH v15 02/15] mtd: spi-nor: add spi_nor_controller_ops_{read_reg,write_reg,erase}() Pratyush Yadav
2020-10-01 20:20   ` [PATCH v15 02/15] mtd: spi-nor: add spi_nor_controller_ops_{read_reg, write_reg, erase}() Pratyush Yadav
2020-10-01 20:20 ` [PATCH v15 03/15] mtd: spi-nor: add support for DTR protocol Pratyush Yadav
2020-10-01 20:20   ` Pratyush Yadav
2020-10-01 20:20 ` [PATCH v15 04/15] mtd: spi-nor: sfdp: get command opcode extension type from BFPT Pratyush Yadav
2020-10-01 20:20   ` Pratyush Yadav
2020-10-01 20:20 ` [PATCH v15 05/15] mtd: spi-nor: sfdp: parse xSPI Profile 1.0 table Pratyush Yadav
2020-10-01 20:20   ` Pratyush Yadav
2020-10-01 20:20 ` [PATCH v15 06/15] mtd: spi-nor: core: use dummy cycle and address width info from SFDP Pratyush Yadav
2020-10-01 20:20   ` Pratyush Yadav
2020-10-01 20:20 ` [PATCH v15 07/15] mtd: spi-nor: core: do 2 byte reads for SR and FSR in DTR mode Pratyush Yadav
2020-10-01 20:20   ` Pratyush Yadav
2020-10-01 20:20 ` [PATCH v15 08/15] mtd: spi-nor: Introduce SNOR_F_IO_MODE_EN_VOLATILE Pratyush Yadav
2020-10-01 20:20   ` Pratyush Yadav
2020-10-01 20:20 ` [PATCH v15 09/15] mtd: spi-nor: Parse SFDP SCCR Map Pratyush Yadav
2020-10-01 20:20   ` Pratyush Yadav
2020-10-01 20:20 ` [PATCH v15 10/15] mtd: spi-nor: core: enable octal DTR mode when possible Pratyush Yadav
2020-10-01 20:20   ` Pratyush Yadav
2020-10-02  9:47   ` Tudor.Ambarus
2020-10-02  9:47     ` Tudor.Ambarus
2020-10-01 20:20 ` [PATCH v15 11/15] mtd: spi-nor: sfdp: detect Soft Reset sequence support from BFPT Pratyush Yadav
2020-10-01 20:20   ` Pratyush Yadav
2020-10-01 20:20 ` [PATCH v15 12/15] mtd: spi-nor: core: perform a Soft Reset on shutdown Pratyush Yadav
2020-10-01 20:20   ` Pratyush Yadav
2020-10-01 20:20 ` [PATCH v15 13/15] mtd: spi-nor: core: disable Octal DTR mode on suspend Pratyush Yadav
2020-10-01 20:20   ` Pratyush Yadav
2020-10-01 20:20 ` [PATCH v15 14/15] mtd: spi-nor: spansion: add support for Cypress Semper flash Pratyush Yadav
2020-10-01 20:20   ` Pratyush Yadav
2020-10-03 11:40   ` Vignesh Raghavendra
2020-10-03 11:40     ` Vignesh Raghavendra
2020-10-01 20:20 ` [PATCH v15 15/15] mtd: spi-nor: micron-st: allow using MT35XU512ABA in Octal DTR mode Pratyush Yadav
2020-10-01 20:20   ` Pratyush Yadav

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201001202045.21499-2-p.yadav@ti.com \
    --to=p.yadav@ti.com \
    --cc=boris.brezillon@collabora.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=miquel.raynal@bootlin.com \
    --cc=nsekhar@ti.com \
    --cc=richard@nod.at \
    --cc=tudor.ambarus@microchip.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.