* [PATCH v3] arm64: dts: armada-3720-espressobin: use Linux model/compatible strings
@ 2020-10-02 5:50 Andre Heider
0 siblings, 0 replies; 5+ messages in thread
From: Andre Heider @ 2020-10-02 5:50 UTC (permalink / raw)
To: u-boot
Fix the actual board vendor and ease synching dts files from Linux.
Signed-off-by: Andre Heider <a.heider@gmail.com>
---
v3: rebase on master
arch/arm/dts/armada-3720-espressobin.dts | 4 ++--
board/Marvell/mvebu_armada-37xx/board.c | 8 ++++----
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
index 4534f5ff29..be67a45870 100644
--- a/arch/arm/dts/armada-3720-espressobin.dts
+++ b/arch/arm/dts/armada-3720-espressobin.dts
@@ -50,8 +50,8 @@
#include "armada-372x.dtsi"
/ {
- model = "Marvell Armada 3720 Community Board ESPRESSOBin";
- compatible = "marvell,armada-3720-espressobin", "marvell,armada3720", "marvell,armada3710";
+ model = "Globalscale Marvell ESPRESSOBin Board";
+ compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
chosen {
stdout-path = "serial0:115200n8";
diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c
index 2bfc7171c4..73d69e0388 100644
--- a/board/Marvell/mvebu_armada-37xx/board.c
+++ b/board/Marvell/mvebu_armada-37xx/board.c
@@ -88,14 +88,14 @@ int board_late_init(void)
if (env_get("fdtfile"))
return 0;
- if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
+ if (!of_machine_is_compatible("globalscale,espressobin"))
return 0;
/* If the memory controller has been configured for DDR4, we're running on v7 */
ddr4 = ((readl(A3700_CH0_MC_CTRL2_REG) >> A3700_MC_CTRL2_SDRAM_TYPE_OFFS)
& A3700_MC_CTRL2_SDRAM_TYPE_MASK) == A3700_MC_CTRL2_SDRAM_TYPE_DDR4;
- emmc = of_machine_is_compatible("marvell,armada-3720-espressobin-emmc");
+ emmc = of_machine_is_compatible("globalscale,espressobin-emmc");
if (ddr4 && emmc)
env_set("fdtfile", "marvell/armada-3720-espressobin-v7-emmc.dtb");
@@ -248,7 +248,7 @@ static int mii_multi_chip_mode_write(struct mii_dev *bus, int dev_smi_addr,
/* Bring-up board-specific network stuff */
int board_network_enable(struct mii_dev *bus)
{
- if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
+ if (!of_machine_is_compatible("globalscale,espressobin"))
return 0;
/*
@@ -300,7 +300,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
int part_off;
/* Fill SPI MTD partitions for Linux kernel on Espressobin */
- if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
+ if (!of_machine_is_compatible("globalscale,espressobin"))
return 0;
spi_off = fdt_node_offset_by_compatible(blob, -1, "jedec,spi-nor");
--
2.28.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v2 1/3] arm64: dts: armada-3720-espressobin: use Linux model/compatible strings
@ 2020-09-04 15:33 Andre Heider
2020-10-02 5:51 ` [PATCH v3] " Andre Heider
0 siblings, 1 reply; 5+ messages in thread
From: Andre Heider @ 2020-09-04 15:33 UTC (permalink / raw)
To: u-boot
Fix the actual board vendor and ease synching dts files from Linux.
Signed-off-by: Andre Heider <a.heider@gmail.com>
---
arch/arm/dts/armada-3720-espressobin.dts | 4 ++--
board/Marvell/mvebu_armada-37xx/board.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
index 4534f5ff29..be67a45870 100644
--- a/arch/arm/dts/armada-3720-espressobin.dts
+++ b/arch/arm/dts/armada-3720-espressobin.dts
@@ -50,8 +50,8 @@
#include "armada-372x.dtsi"
/ {
- model = "Marvell Armada 3720 Community Board ESPRESSOBin";
- compatible = "marvell,armada-3720-espressobin", "marvell,armada3720", "marvell,armada3710";
+ model = "Globalscale Marvell ESPRESSOBin Board";
+ compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
chosen {
stdout-path = "serial0:115200n8";
diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c
index 7b9c3223ed..90bfc139aa 100644
--- a/board/Marvell/mvebu_armada-37xx/board.c
+++ b/board/Marvell/mvebu_armada-37xx/board.c
@@ -201,7 +201,7 @@ static int mii_multi_chip_mode_write(struct mii_dev *bus, int dev_smi_addr,
/* Bring-up board-specific network stuff */
int board_network_enable(struct mii_dev *bus)
{
- if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
+ if (!of_machine_is_compatible("globalscale,espressobin"))
return 0;
/*
@@ -253,7 +253,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
int part_off;
/* Fill SPI MTD partitions for Linux kernel on Espressobin */
- if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
+ if (!of_machine_is_compatible("globalscale,espressobin"))
return 0;
spi_off = fdt_node_offset_by_compatible(blob, -1, "jedec,spi-nor");
--
2.28.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v3] arm64: dts: armada-3720-espressobin: use Linux model/compatible strings
2020-09-04 15:33 [PATCH v2 1/3] " Andre Heider
@ 2020-10-02 5:51 ` Andre Heider
2020-10-02 10:56 ` Pali Rohár
` (2 more replies)
0 siblings, 3 replies; 5+ messages in thread
From: Andre Heider @ 2020-10-02 5:51 UTC (permalink / raw)
To: u-boot
Fix the actual board vendor and ease synching dts files from Linux.
Signed-off-by: Andre Heider <a.heider@gmail.com>
---
v3: rebase on master
arch/arm/dts/armada-3720-espressobin.dts | 4 ++--
board/Marvell/mvebu_armada-37xx/board.c | 8 ++++----
2 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
index 4534f5ff29..be67a45870 100644
--- a/arch/arm/dts/armada-3720-espressobin.dts
+++ b/arch/arm/dts/armada-3720-espressobin.dts
@@ -50,8 +50,8 @@
#include "armada-372x.dtsi"
/ {
- model = "Marvell Armada 3720 Community Board ESPRESSOBin";
- compatible = "marvell,armada-3720-espressobin", "marvell,armada3720", "marvell,armada3710";
+ model = "Globalscale Marvell ESPRESSOBin Board";
+ compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
chosen {
stdout-path = "serial0:115200n8";
diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c
index 2bfc7171c4..73d69e0388 100644
--- a/board/Marvell/mvebu_armada-37xx/board.c
+++ b/board/Marvell/mvebu_armada-37xx/board.c
@@ -88,14 +88,14 @@ int board_late_init(void)
if (env_get("fdtfile"))
return 0;
- if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
+ if (!of_machine_is_compatible("globalscale,espressobin"))
return 0;
/* If the memory controller has been configured for DDR4, we're running on v7 */
ddr4 = ((readl(A3700_CH0_MC_CTRL2_REG) >> A3700_MC_CTRL2_SDRAM_TYPE_OFFS)
& A3700_MC_CTRL2_SDRAM_TYPE_MASK) == A3700_MC_CTRL2_SDRAM_TYPE_DDR4;
- emmc = of_machine_is_compatible("marvell,armada-3720-espressobin-emmc");
+ emmc = of_machine_is_compatible("globalscale,espressobin-emmc");
if (ddr4 && emmc)
env_set("fdtfile", "marvell/armada-3720-espressobin-v7-emmc.dtb");
@@ -248,7 +248,7 @@ static int mii_multi_chip_mode_write(struct mii_dev *bus, int dev_smi_addr,
/* Bring-up board-specific network stuff */
int board_network_enable(struct mii_dev *bus)
{
- if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
+ if (!of_machine_is_compatible("globalscale,espressobin"))
return 0;
/*
@@ -300,7 +300,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
int part_off;
/* Fill SPI MTD partitions for Linux kernel on Espressobin */
- if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
+ if (!of_machine_is_compatible("globalscale,espressobin"))
return 0;
spi_off = fdt_node_offset_by_compatible(blob, -1, "jedec,spi-nor");
--
2.28.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH v3] arm64: dts: armada-3720-espressobin: use Linux model/compatible strings
2020-10-02 5:51 ` [PATCH v3] " Andre Heider
@ 2020-10-02 10:56 ` Pali Rohár
2020-10-07 4:57 ` Stefan Roese
2020-10-14 8:16 ` Stefan Roese
2 siblings, 0 replies; 5+ messages in thread
From: Pali Rohár @ 2020-10-02 10:56 UTC (permalink / raw)
To: u-boot
CCing Heinrich, I think you should be interested in this patch.
On Friday 02 October 2020 07:51:12 Andre Heider wrote:
> Fix the actual board vendor and ease synching dts files from Linux.
>
> Signed-off-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Pali Roh?r <pali@kernel.org>
> ---
> v3: rebase on master
>
> arch/arm/dts/armada-3720-espressobin.dts | 4 ++--
> board/Marvell/mvebu_armada-37xx/board.c | 8 ++++----
> 2 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
> index 4534f5ff29..be67a45870 100644
> --- a/arch/arm/dts/armada-3720-espressobin.dts
> +++ b/arch/arm/dts/armada-3720-espressobin.dts
> @@ -50,8 +50,8 @@
> #include "armada-372x.dtsi"
>
> / {
> - model = "Marvell Armada 3720 Community Board ESPRESSOBin";
> - compatible = "marvell,armada-3720-espressobin", "marvell,armada3720", "marvell,armada3710";
> + model = "Globalscale Marvell ESPRESSOBin Board";
> + compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
>
> chosen {
> stdout-path = "serial0:115200n8";
> diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c
> index 2bfc7171c4..73d69e0388 100644
> --- a/board/Marvell/mvebu_armada-37xx/board.c
> +++ b/board/Marvell/mvebu_armada-37xx/board.c
> @@ -88,14 +88,14 @@ int board_late_init(void)
> if (env_get("fdtfile"))
> return 0;
>
> - if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
> + if (!of_machine_is_compatible("globalscale,espressobin"))
> return 0;
>
> /* If the memory controller has been configured for DDR4, we're running on v7 */
> ddr4 = ((readl(A3700_CH0_MC_CTRL2_REG) >> A3700_MC_CTRL2_SDRAM_TYPE_OFFS)
> & A3700_MC_CTRL2_SDRAM_TYPE_MASK) == A3700_MC_CTRL2_SDRAM_TYPE_DDR4;
>
> - emmc = of_machine_is_compatible("marvell,armada-3720-espressobin-emmc");
> + emmc = of_machine_is_compatible("globalscale,espressobin-emmc");
>
> if (ddr4 && emmc)
> env_set("fdtfile", "marvell/armada-3720-espressobin-v7-emmc.dtb");
> @@ -248,7 +248,7 @@ static int mii_multi_chip_mode_write(struct mii_dev *bus, int dev_smi_addr,
> /* Bring-up board-specific network stuff */
> int board_network_enable(struct mii_dev *bus)
> {
> - if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
> + if (!of_machine_is_compatible("globalscale,espressobin"))
> return 0;
>
> /*
> @@ -300,7 +300,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
> int part_off;
>
> /* Fill SPI MTD partitions for Linux kernel on Espressobin */
> - if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
> + if (!of_machine_is_compatible("globalscale,espressobin"))
> return 0;
>
> spi_off = fdt_node_offset_by_compatible(blob, -1, "jedec,spi-nor");
> --
> 2.28.0
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v3] arm64: dts: armada-3720-espressobin: use Linux model/compatible strings
2020-10-02 5:51 ` [PATCH v3] " Andre Heider
2020-10-02 10:56 ` Pali Rohár
@ 2020-10-07 4:57 ` Stefan Roese
2020-10-14 8:16 ` Stefan Roese
2 siblings, 0 replies; 5+ messages in thread
From: Stefan Roese @ 2020-10-07 4:57 UTC (permalink / raw)
To: u-boot
On 02.10.20 07:51, Andre Heider wrote:
> Fix the actual board vendor and ease synching dts files from Linux.
>
> Signed-off-by: Andre Heider <a.heider@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Thanks,
Stefan
> ---
> v3: rebase on master
>
> arch/arm/dts/armada-3720-espressobin.dts | 4 ++--
> board/Marvell/mvebu_armada-37xx/board.c | 8 ++++----
> 2 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
> index 4534f5ff29..be67a45870 100644
> --- a/arch/arm/dts/armada-3720-espressobin.dts
> +++ b/arch/arm/dts/armada-3720-espressobin.dts
> @@ -50,8 +50,8 @@
> #include "armada-372x.dtsi"
>
> / {
> - model = "Marvell Armada 3720 Community Board ESPRESSOBin";
> - compatible = "marvell,armada-3720-espressobin", "marvell,armada3720", "marvell,armada3710";
> + model = "Globalscale Marvell ESPRESSOBin Board";
> + compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
>
> chosen {
> stdout-path = "serial0:115200n8";
> diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c
> index 2bfc7171c4..73d69e0388 100644
> --- a/board/Marvell/mvebu_armada-37xx/board.c
> +++ b/board/Marvell/mvebu_armada-37xx/board.c
> @@ -88,14 +88,14 @@ int board_late_init(void)
> if (env_get("fdtfile"))
> return 0;
>
> - if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
> + if (!of_machine_is_compatible("globalscale,espressobin"))
> return 0;
>
> /* If the memory controller has been configured for DDR4, we're running on v7 */
> ddr4 = ((readl(A3700_CH0_MC_CTRL2_REG) >> A3700_MC_CTRL2_SDRAM_TYPE_OFFS)
> & A3700_MC_CTRL2_SDRAM_TYPE_MASK) == A3700_MC_CTRL2_SDRAM_TYPE_DDR4;
>
> - emmc = of_machine_is_compatible("marvell,armada-3720-espressobin-emmc");
> + emmc = of_machine_is_compatible("globalscale,espressobin-emmc");
>
> if (ddr4 && emmc)
> env_set("fdtfile", "marvell/armada-3720-espressobin-v7-emmc.dtb");
> @@ -248,7 +248,7 @@ static int mii_multi_chip_mode_write(struct mii_dev *bus, int dev_smi_addr,
> /* Bring-up board-specific network stuff */
> int board_network_enable(struct mii_dev *bus)
> {
> - if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
> + if (!of_machine_is_compatible("globalscale,espressobin"))
> return 0;
>
> /*
> @@ -300,7 +300,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
> int part_off;
>
> /* Fill SPI MTD partitions for Linux kernel on Espressobin */
> - if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
> + if (!of_machine_is_compatible("globalscale,espressobin"))
> return 0;
>
> spi_off = fdt_node_offset_by_compatible(blob, -1, "jedec,spi-nor");
>
Viele Gr??e,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v3] arm64: dts: armada-3720-espressobin: use Linux model/compatible strings
2020-10-02 5:51 ` [PATCH v3] " Andre Heider
2020-10-02 10:56 ` Pali Rohár
2020-10-07 4:57 ` Stefan Roese
@ 2020-10-14 8:16 ` Stefan Roese
2 siblings, 0 replies; 5+ messages in thread
From: Stefan Roese @ 2020-10-14 8:16 UTC (permalink / raw)
To: u-boot
On 02.10.20 07:51, Andre Heider wrote:
> Fix the actual board vendor and ease synching dts files from Linux.
>
> Signed-off-by: Andre Heider <a.heider@gmail.com>
> ---
> v3: rebase on master
Applied to u-boot-marvell/master
Thanks,
Stefan
> arch/arm/dts/armada-3720-espressobin.dts | 4 ++--
> board/Marvell/mvebu_armada-37xx/board.c | 8 ++++----
> 2 files changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/arch/arm/dts/armada-3720-espressobin.dts b/arch/arm/dts/armada-3720-espressobin.dts
> index 4534f5ff29..be67a45870 100644
> --- a/arch/arm/dts/armada-3720-espressobin.dts
> +++ b/arch/arm/dts/armada-3720-espressobin.dts
> @@ -50,8 +50,8 @@
> #include "armada-372x.dtsi"
>
> / {
> - model = "Marvell Armada 3720 Community Board ESPRESSOBin";
> - compatible = "marvell,armada-3720-espressobin", "marvell,armada3720", "marvell,armada3710";
> + model = "Globalscale Marvell ESPRESSOBin Board";
> + compatible = "globalscale,espressobin", "marvell,armada3720", "marvell,armada3710";
>
> chosen {
> stdout-path = "serial0:115200n8";
> diff --git a/board/Marvell/mvebu_armada-37xx/board.c b/board/Marvell/mvebu_armada-37xx/board.c
> index 2bfc7171c4..73d69e0388 100644
> --- a/board/Marvell/mvebu_armada-37xx/board.c
> +++ b/board/Marvell/mvebu_armada-37xx/board.c
> @@ -88,14 +88,14 @@ int board_late_init(void)
> if (env_get("fdtfile"))
> return 0;
>
> - if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
> + if (!of_machine_is_compatible("globalscale,espressobin"))
> return 0;
>
> /* If the memory controller has been configured for DDR4, we're running on v7 */
> ddr4 = ((readl(A3700_CH0_MC_CTRL2_REG) >> A3700_MC_CTRL2_SDRAM_TYPE_OFFS)
> & A3700_MC_CTRL2_SDRAM_TYPE_MASK) == A3700_MC_CTRL2_SDRAM_TYPE_DDR4;
>
> - emmc = of_machine_is_compatible("marvell,armada-3720-espressobin-emmc");
> + emmc = of_machine_is_compatible("globalscale,espressobin-emmc");
>
> if (ddr4 && emmc)
> env_set("fdtfile", "marvell/armada-3720-espressobin-v7-emmc.dtb");
> @@ -248,7 +248,7 @@ static int mii_multi_chip_mode_write(struct mii_dev *bus, int dev_smi_addr,
> /* Bring-up board-specific network stuff */
> int board_network_enable(struct mii_dev *bus)
> {
> - if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
> + if (!of_machine_is_compatible("globalscale,espressobin"))
> return 0;
>
> /*
> @@ -300,7 +300,7 @@ int ft_board_setup(void *blob, struct bd_info *bd)
> int part_off;
>
> /* Fill SPI MTD partitions for Linux kernel on Espressobin */
> - if (!of_machine_is_compatible("marvell,armada-3720-espressobin"))
> + if (!of_machine_is_compatible("globalscale,espressobin"))
> return 0;
>
> spi_off = fdt_node_offset_by_compatible(blob, -1, "jedec,spi-nor");
>
Viele Gr??e,
Stefan
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2020-10-14 8:16 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-10-02 5:50 [PATCH v3] arm64: dts: armada-3720-espressobin: use Linux model/compatible strings Andre Heider
-- strict thread matches above, loose matches on Subject: below --
2020-09-04 15:33 [PATCH v2 1/3] " Andre Heider
2020-10-02 5:51 ` [PATCH v3] " Andre Heider
2020-10-02 10:56 ` Pali Rohár
2020-10-07 4:57 ` Stefan Roese
2020-10-14 8:16 ` Stefan Roese
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.