From: Vladimir Oltean <vladimir.oltean@nxp.com> To: netdev@vger.kernel.org, davem@davemloft.net, kuba@kernel.org Cc: robh+dt@kernel.org, shawnguo@kernel.org, mpe@ellerman.id.au, benh@kernel.crashing.org, paulus@samba.org, devicetree@vger.kernel.org, linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org, madalin.bucur@oss.nxp.com, radu-andrei.bulie@nxp.com, fido_max@inbox.ru, andrew@lunn.ch Subject: [PATCH v4 net-next 1/2] powerpc: dts: t1040: add bindings for Seville Ethernet switch Date: Fri, 2 Oct 2020 16:41:05 +0300 [thread overview] Message-ID: <20201002134106.3485970-2-vladimir.oltean@nxp.com> (raw) In-Reply-To: <20201002134106.3485970-1-vladimir.oltean@nxp.com> Add the description of the embedded L2 switch inside the SoC dtsi file for NXP T1040. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> --- Changes in v4: Retargeting to net-next. Changes in v3: Added definition for frame extraction interrupt, even if the driver doesn't use it at the moment. Changes in v2: Make switch node disabled by default. arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 78 +++++++++++++++++++++ 1 file changed, 78 insertions(+) diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi index 315d0557eefc..f58eb820eb5e 100644 --- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi @@ -628,6 +628,84 @@ mdio@fd000 { status = "disabled"; }; }; + + seville_switch: ethernet-switch@800000 { + compatible = "mscc,vsc9953-switch"; + reg = <0x800000 0x290000>; + interrupts = <26 2 0 0>; + interrupt-names = "xtr"; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + seville_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + seville_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + seville_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + seville_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + seville_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + + seville_port5: port@5 { + reg = <5>; + status = "disabled"; + }; + + seville_port6: port@6 { + reg = <6>; + status = "disabled"; + }; + + seville_port7: port@7 { + reg = <7>; + status = "disabled"; + }; + + seville_port8: port@8 { + reg = <8>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + + seville_port9: port@9 { + reg = <9>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + }; + }; }; &qe { -- 2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Vladimir Oltean <vladimir.oltean@nxp.com> To: netdev@vger.kernel.org, davem@davemloft.net, kuba@kernel.org Cc: devicetree@vger.kernel.org, andrew@lunn.ch, madalin.bucur@oss.nxp.com, radu-andrei.bulie@nxp.com, linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org, fido_max@inbox.ru, robh+dt@kernel.org, paulus@samba.org, shawnguo@kernel.org Subject: [PATCH v4 net-next 1/2] powerpc: dts: t1040: add bindings for Seville Ethernet switch Date: Fri, 2 Oct 2020 16:41:05 +0300 [thread overview] Message-ID: <20201002134106.3485970-2-vladimir.oltean@nxp.com> (raw) In-Reply-To: <20201002134106.3485970-1-vladimir.oltean@nxp.com> Add the description of the embedded L2 switch inside the SoC dtsi file for NXP T1040. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Maxim Kochetkov <fido_max@inbox.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> --- Changes in v4: Retargeting to net-next. Changes in v3: Added definition for frame extraction interrupt, even if the driver doesn't use it at the moment. Changes in v2: Make switch node disabled by default. arch/powerpc/boot/dts/fsl/t1040si-post.dtsi | 78 +++++++++++++++++++++ 1 file changed, 78 insertions(+) diff --git a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi index 315d0557eefc..f58eb820eb5e 100644 --- a/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/t1040si-post.dtsi @@ -628,6 +628,84 @@ mdio@fd000 { status = "disabled"; }; }; + + seville_switch: ethernet-switch@800000 { + compatible = "mscc,vsc9953-switch"; + reg = <0x800000 0x290000>; + interrupts = <26 2 0 0>; + interrupt-names = "xtr"; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + seville_port0: port@0 { + reg = <0>; + status = "disabled"; + }; + + seville_port1: port@1 { + reg = <1>; + status = "disabled"; + }; + + seville_port2: port@2 { + reg = <2>; + status = "disabled"; + }; + + seville_port3: port@3 { + reg = <3>; + status = "disabled"; + }; + + seville_port4: port@4 { + reg = <4>; + status = "disabled"; + }; + + seville_port5: port@5 { + reg = <5>; + status = "disabled"; + }; + + seville_port6: port@6 { + reg = <6>; + status = "disabled"; + }; + + seville_port7: port@7 { + reg = <7>; + status = "disabled"; + }; + + seville_port8: port@8 { + reg = <8>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + + seville_port9: port@9 { + reg = <9>; + phy-mode = "internal"; + status = "disabled"; + + fixed-link { + speed = <2500>; + full-duplex; + }; + }; + }; + }; }; &qe { -- 2.25.1
next prev parent reply other threads:[~2020-10-02 13:41 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-10-02 13:41 [PATCH v4 net-next 0/2] Add Seville Ethernet switch to T1040RDB Vladimir Oltean 2020-10-02 13:41 ` Vladimir Oltean 2020-10-02 13:41 ` Vladimir Oltean [this message] 2020-10-02 13:41 ` [PATCH v4 net-next 1/2] powerpc: dts: t1040: add bindings for Seville Ethernet switch Vladimir Oltean 2020-10-02 13:41 ` [PATCH v4 net-next 2/2] powerpc: dts: t1040rdb: add ports " Vladimir Oltean 2020-10-02 13:41 ` Vladimir Oltean 2020-10-04 0:03 ` [PATCH v4 net-next 0/2] Add Seville Ethernet switch to T1040RDB David Miller 2020-10-04 0:03 ` David Miller
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201002134106.3485970-2-vladimir.oltean@nxp.com \ --to=vladimir.oltean@nxp.com \ --cc=andrew@lunn.ch \ --cc=benh@kernel.crashing.org \ --cc=davem@davemloft.net \ --cc=devicetree@vger.kernel.org \ --cc=fido_max@inbox.ru \ --cc=kuba@kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linuxppc-dev@lists.ozlabs.org \ --cc=madalin.bucur@oss.nxp.com \ --cc=mpe@ellerman.id.au \ --cc=netdev@vger.kernel.org \ --cc=paulus@samba.org \ --cc=radu-andrei.bulie@nxp.com \ --cc=robh+dt@kernel.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.