From: Nishanth Menon <nm@ti.com> To: Olof Johansson <olof@lixom.net>, Arnd Bergmann <arnd@arndb.de>, <arm@kernel.org>, <soc@kernel.org> Cc: <t-kristo@ti.com>, <linux-arm-kernel@lists.infradead.org>, <linux-kernel@vger.kernel.org> Subject: [GIT PULL] arm64: TI K3 DT updates for v5.10 - part #2 Date: Fri, 2 Oct 2020 08:45:59 -0500 [thread overview] Message-ID: <20201002134559.orvmgbns57qlyn3i@akan> (raw) [-- Attachment #1: Type: text/plain, Size: 4746 bytes --] Hi ARM SoC maintainers, Please pull the following part2 of the TI K3 DTS support since [1]. This also contains the PR [2] which provides the base for the J7200 USB support in this PR. Primary highlights in the part #2: - New K3 SoC: J7200 and related board J7200 Common processor board - Bunch of peripherals for J7200 (DMA, USB, MMC, Ethernet..) - GPIO hog node rename to abide by the updated yaml bindings. The following changes since commit 66db854b1f62dbee48ec7373f149fa30e4b3dd4e: arm64: dts: ti: k3-j721e-common-proc-board: Configure the PCIe instances (2020-09-22 08:19:47 -0500) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git tags/ti-k3-dt-for-v5.10-part2 for you to fetch changes up to bbcb0522ae0cea0f2561e7dad243f8a3d5ab5559: arm64: dts: ti: k3-j7200-common-proc-board: Add USB support (2020-09-30 07:34:03 -0500) ---------------------------------------------------------------- Second and final device tree updates towards 5.10-rc1 for TI K3 platform. ---------------------------------------------------------------- Faiz Abbas (2): arm64: dts: ti: k3-j7200-main: Add support for MMC/SD controller nodes arm64: dts: ti: k3-j7200-common-proc-board: Add support for eMMC and SD card Grygorii Strashko (3): arm64: dts: ti: k3-j7200-main: add main navss cpts node arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux and phy defs Kishon Vijay Abraham I (1): arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function Krzysztof Kozlowski (1): arm64: dts: ti: k3-j721e-common-proc-board: align GPIO hog names with dtschema Lokesh Vutla (5): arm64: dts: ti: Makefile: Use ARCH_K3 for building dtbs dt-bindings: arm: ti: Convert K3 board/soc bindings to DT schema dt-bindings: arm: ti: Add bindings for J7200 SoC arm64: dts: ti: Add support for J7200 SoC arm64: dts: ti: Add support for J7200 Common Processor Board Nishanth Menon (1): Merge tag 'ti-k3-dt-fixes-for-v5.9' into ti-k3-dts-next Peter Ujfalusi (1): arm64: dts: ti: k3-j7200: add DMA support Roger Quadros (6): arm64: dts: ti: k3-j721e: Rename mux header and update macro names dt-bindings: ti-serdes-mux: Add defines for J7200 SoC arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-common-proc-board: Add USB support Vignesh Raghavendra (4): arm64: dts: ti: k3-j7200: Add I2C nodes arm64: dts: ti: k3-j7200-common-proc-board: Add I2C IO expanders arm64: dts: ti: k3-j7200-mcu-wakeup: Add HyperBus node arm64: dts: ti: k3-j7200-som-p0: Add HyperFlash node Documentation/devicetree/bindings/arm/ti/k3.txt | 26 -- Documentation/devicetree/bindings/arm/ti/k3.yaml | 35 ++ MAINTAINERS | 2 +- arch/arm64/boot/dts/ti/Makefile | 8 +- .../boot/dts/ti/k3-j7200-common-proc-board.dts | 215 ++++++++++ arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 449 +++++++++++++++++++++ arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 273 +++++++++++++ arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 65 +++ arch/arm64/boot/dts/ti/k3-j7200.dtsi | 172 ++++++++ .../boot/dts/ti/k3-j721e-common-proc-board.dts | 15 +- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 13 +- include/dt-bindings/mux/mux-j721e-wiz.h | 53 --- include/dt-bindings/mux/ti-serdes.h | 93 +++++ 13 files changed, 1323 insertions(+), 96 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/ti/k3.txt create mode 100644 Documentation/devicetree/bindings/arm/ti/k3.yaml create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200.dtsi delete mode 100644 include/dt-bindings/mux/mux-j721e-wiz.h create mode 100644 include/dt-bindings/mux/ti-serdes.h [1] https://lore.kernel.org/linux-arm-kernel/20200922134722.2y5kqxu4lghbwp5u@akan/ [2] https://lore.kernel.org/linux-arm-kernel/20200921125402.mtwypblhb45a6ssh@akan/ -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --]
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm@ti.com> To: Olof Johansson <olof@lixom.net>, Arnd Bergmann <arnd@arndb.de>, <arm@kernel.org>, <soc@kernel.org> Cc: t-kristo@ti.com, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [GIT PULL] arm64: TI K3 DT updates for v5.10 - part #2 Date: Fri, 2 Oct 2020 08:45:59 -0500 [thread overview] Message-ID: <20201002134559.orvmgbns57qlyn3i@akan> (raw) [-- Attachment #1.1: Type: text/plain, Size: 4746 bytes --] Hi ARM SoC maintainers, Please pull the following part2 of the TI K3 DTS support since [1]. This also contains the PR [2] which provides the base for the J7200 USB support in this PR. Primary highlights in the part #2: - New K3 SoC: J7200 and related board J7200 Common processor board - Bunch of peripherals for J7200 (DMA, USB, MMC, Ethernet..) - GPIO hog node rename to abide by the updated yaml bindings. The following changes since commit 66db854b1f62dbee48ec7373f149fa30e4b3dd4e: arm64: dts: ti: k3-j721e-common-proc-board: Configure the PCIe instances (2020-09-22 08:19:47 -0500) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/nmenon/linux.git tags/ti-k3-dt-for-v5.10-part2 for you to fetch changes up to bbcb0522ae0cea0f2561e7dad243f8a3d5ab5559: arm64: dts: ti: k3-j7200-common-proc-board: Add USB support (2020-09-30 07:34:03 -0500) ---------------------------------------------------------------- Second and final device tree updates towards 5.10-rc1 for TI K3 platform. ---------------------------------------------------------------- Faiz Abbas (2): arm64: dts: ti: k3-j7200-main: Add support for MMC/SD controller nodes arm64: dts: ti: k3-j7200-common-proc-board: Add support for eMMC and SD card Grygorii Strashko (3): arm64: dts: ti: k3-j7200-main: add main navss cpts node arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux and phy defs Kishon Vijay Abraham I (1): arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function Krzysztof Kozlowski (1): arm64: dts: ti: k3-j721e-common-proc-board: align GPIO hog names with dtschema Lokesh Vutla (5): arm64: dts: ti: Makefile: Use ARCH_K3 for building dtbs dt-bindings: arm: ti: Convert K3 board/soc bindings to DT schema dt-bindings: arm: ti: Add bindings for J7200 SoC arm64: dts: ti: Add support for J7200 SoC arm64: dts: ti: Add support for J7200 Common Processor Board Nishanth Menon (1): Merge tag 'ti-k3-dt-fixes-for-v5.9' into ti-k3-dts-next Peter Ujfalusi (1): arm64: dts: ti: k3-j7200: add DMA support Roger Quadros (6): arm64: dts: ti: k3-j721e: Rename mux header and update macro names dt-bindings: ti-serdes-mux: Add defines for J7200 SoC arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX arm64: dts: ti: k3-j7200-main: Add USB controller arm64: dts: ti: k3-j7200-common-proc-board: Add USB support Vignesh Raghavendra (4): arm64: dts: ti: k3-j7200: Add I2C nodes arm64: dts: ti: k3-j7200-common-proc-board: Add I2C IO expanders arm64: dts: ti: k3-j7200-mcu-wakeup: Add HyperBus node arm64: dts: ti: k3-j7200-som-p0: Add HyperFlash node Documentation/devicetree/bindings/arm/ti/k3.txt | 26 -- Documentation/devicetree/bindings/arm/ti/k3.yaml | 35 ++ MAINTAINERS | 2 +- arch/arm64/boot/dts/ti/Makefile | 8 +- .../boot/dts/ti/k3-j7200-common-proc-board.dts | 215 ++++++++++ arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 449 +++++++++++++++++++++ arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 273 +++++++++++++ arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi | 65 +++ arch/arm64/boot/dts/ti/k3-j7200.dtsi | 172 ++++++++ .../boot/dts/ti/k3-j721e-common-proc-board.dts | 15 +- arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 13 +- include/dt-bindings/mux/mux-j721e-wiz.h | 53 --- include/dt-bindings/mux/ti-serdes.h | 93 +++++ 13 files changed, 1323 insertions(+), 96 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/ti/k3.txt create mode 100644 Documentation/devicetree/bindings/arm/ti/k3.yaml create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi create mode 100644 arch/arm64/boot/dts/ti/k3-j7200.dtsi delete mode 100644 include/dt-bindings/mux/mux-j721e-wiz.h create mode 100644 include/dt-bindings/mux/ti-serdes.h [1] https://lore.kernel.org/linux-arm-kernel/20200922134722.2y5kqxu4lghbwp5u@akan/ [2] https://lore.kernel.org/linux-arm-kernel/20200921125402.mtwypblhb45a6ssh@akan/ -- Regards, Nishanth Menon Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D [-- Attachment #1.2: signature.asc --] [-- Type: application/pgp-signature, Size: 833 bytes --] [-- Attachment #2: Type: text/plain, Size: 176 bytes --] _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2020-10-02 13:46 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2020-10-02 13:45 Nishanth Menon [this message] 2020-10-02 13:45 ` [GIT PULL] arm64: TI K3 DT updates for v5.10 - part #2 Nishanth Menon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20201002134559.orvmgbns57qlyn3i@akan \ --to=nm@ti.com \ --cc=arm@kernel.org \ --cc=arnd@arndb.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=olof@lixom.net \ --cc=soc@kernel.org \ --cc=t-kristo@ti.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.